From: Markus Mayer <[email protected]>
This fix is for 4.10.
The driver needs to save the proper P-state on suspend, so it'll resume at
the same speed.
We also add the P-state and the mode as returned by the AVS firmware GET_PMAP
command to the existing brcm_avs_pmap sysfs entry. This will make it easier
to diagnose any issues.
Markus Mayer (2):
cpufreq: brcmstb-avs-cpufreq: extend sysfs entry brcm_avs_pmap
cpufreq: brcmstb-avs-cpufreq: properly retrieve P-state upon suspend
drivers/cpufreq/brcmstb-avs-cpufreq.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--
2.7.4
From: Markus Mayer <[email protected]>
The AVS GET_PMAP command does return a P-state along with the P-map
information. However, that P-state is the initial P-state when the
P-map was first downloaded to AVS. It is *not* the current P-state.
Therefore, we explicitly retrieve the P-state using the GET_PSTATE
command.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/cpufreq/brcmstb-avs-cpufreq.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 2c6e325..c943606 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -784,8 +784,19 @@ static int brcm_avs_target_index(struct cpufreq_policy *policy,
static int brcm_avs_suspend(struct cpufreq_policy *policy)
{
struct private_data *priv = policy->driver_data;
+ int ret;
+
+ ret = brcm_avs_get_pmap(priv, &priv->pmap);
+ if (ret)
+ return ret;
- return brcm_avs_get_pmap(priv, &priv->pmap);
+ /*
+ * We can't use the P-state returned by brcm_avs_get_pmap(), since
+ * that's the initial P-state from when the P-map was downloaded to the
+ * AVS co-processor, not necessarily the P-state we are running at now.
+ * So, we get the current P-state explicitly.
+ */
+ return brcm_avs_get_pstate(priv, &priv->pmap.state);
}
static int brcm_avs_resume(struct cpufreq_policy *policy)
--
2.7.4
From: Markus Mayer <[email protected]>
We extend the brcm_avs_pmap sysfs entry (which issues the GET_PMAP
command to AVS) to include all fields from struct pmap. This means
adding mode (AVS, DVS, DVFS) and state (the P-state) to the output.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/cpufreq/brcmstb-avs-cpufreq.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index 4fda623..2c6e325 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -954,9 +954,9 @@ static ssize_t show_brcm_avs_pmap(struct cpufreq_policy *policy, char *buf)
brcm_avs_parse_p1(pmap.p1, &mdiv_p0, &pdiv, &ndiv);
brcm_avs_parse_p2(pmap.p2, &mdiv_p1, &mdiv_p2, &mdiv_p3, &mdiv_p4);
- return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u\n",
+ return sprintf(buf, "0x%08x 0x%08x %u %u %u %u %u %u %u %u %u\n",
pmap.p1, pmap.p2, ndiv, pdiv, mdiv_p0, mdiv_p1, mdiv_p2,
- mdiv_p3, mdiv_p4);
+ mdiv_p3, mdiv_p4, pmap.mode, pmap.state);
}
static ssize_t show_brcm_avs_voltage(struct cpufreq_policy *policy, char *buf)
--
2.7.4