As per the device tree binding the apq8064 scm node requires the core
clock to be specified, so add this.
Cc: John Stultz <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 268bd470c865..78bf155a52f3 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -303,6 +303,9 @@
firmware {
scm {
compatible = "qcom,scm-apq8064";
+
+ clocks = <&gcc CE3_CORE_CLK>;
+ clock-names = "core";
};
};
--
2.11.0
Cc: John Stultz <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index ebd675ca94b4..a34ba3555454 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -390,5 +390,12 @@
pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
};
};
--
2.11.0
Add the missing properties for pm8921 smps2.
Signed-off-by: Bjorn Andersson <[email protected]>
---
My SD600eval broke, so this is untested.
arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index 39ae2bc8cb08..b7dcab28642d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -74,6 +74,14 @@
bias-pull-down;
};
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+
s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
--
2.11.0
Signed-off-by: Bjorn Andersson <[email protected]>
---
My SD600eval broke, so this is untested.
arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index b7dcab28642d..8fee42901a3d 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -355,5 +355,12 @@
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
};
};
+
+ riva-pil@3204000 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>;
+ };
};
};
--
2.11.0
Add nodes for the Riva PIL, IRIS RF module, BT and WiFI services exposed
by the Riva firmware and the related memory reserve.
Also provides pinctrl nodes for devices enabling the riva-pil.
Cc: John Stultz <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
---
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 18 +++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 69 +++++++++++++++++++++++++++++++-
2 files changed, 86 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 6b801e7e57a2..5c023e649882 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -284,4 +284,22 @@
bias-disable = <0>;
};
};
+
+ riva_fm_pin_a: riva-fm-active {
+ pins = "gpio14", "gpio15";
+ function = "riva_fm";
+ };
+
+ riva_bt_pin_a: riva-bt-active {
+ pins = "gpio16", "gpio17";
+ function = "riva_bt";
+ };
+
+ riva_wlan_pin_a: riva-wlan-active {
+ pins = "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "riva_wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 78bf155a52f3..3dc7a7aa3450 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -21,6 +21,11 @@
reg = <0x80000000 0x200000>;
no-map;
};
+
+ wcnss_mem: wcnss@8f000000 {
+ reg = <0x8f000000 0x700000>;
+ no-map;
+ };
};
cpus {
@@ -179,7 +184,7 @@
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
@@ -1419,6 +1424,68 @@
};
};
};
+
+ riva: riva-pil@3204000 {
+ compatible = "qcom,riva-pil";
+
+ reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
+ reg-names = "ccu", "dxe", "pmu";
+
+ interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal";
+
+ memory-region = <&wcnss_mem>;
+
+ vddcx-supply = <&pm8921_s3>;
+ vddmx-supply = <&pm8921_l24>;
+ vddpx-supply = <&pm8921_s4>;
+
+ status = "disabled";
+
+ iris {
+ compatible = "qcom,wcn3660";
+
+ clocks = <&cxo_board>;
+ clock-names = "xo";
+
+ vddxo-supply = <&pm8921_l4>;
+ vddrfa-supply = <&pm8921_s2>;
+ vddpa-supply = <&pm8921_l10>;
+ vdddig-supply = <&pm8921_lvs2>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&l2cc 8 25>;
+ qcom,smd-edge = <6>;
+
+ label = "riva";
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ qcom,mmio = <&riva>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wifi {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+ };
};
};
#include "qcom-apq8064-pins.dtsi"
--
2.11.0
On Wed, Dec 21, 2016 at 03:49:35AM -0800, Bjorn Andersson wrote:
> As per the device tree binding the apq8064 scm node requires the core
> clock to be specified, so add this.
>
> Cc: John Stultz <[email protected]>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
> arch/arm/boot/dts/qcom-apq8064.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 268bd470c865..78bf155a52f3 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -303,6 +303,9 @@
> firmware {
> scm {
> compatible = "qcom,scm-apq8064";
> +
> + clocks = <&gcc CE3_CORE_CLK>;
> + clock-names = "core";
Isn't this supposed to be the DFAB clk? The RPM one? I think that's why we let
the clock just fall through optionally before the recent changes that broke
this.
Regards,
Andy