Hi Linus,
Due to time constraints and personal issues Guenter and I decided that this window will be a pull from another location.
So please pull from 'watchdog-for-linus-v4.10' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
It contains the following patches:
* Add da9062/61 watchdog driver
* Add Loongson1 SoC watchdog driver
* Add IT8620E watchdog device
* module load /uload fixes for bcm7083_wdt, max77620_wdt and jz4740
* intel-mid_wdt fixes
* and other fixes and cleanups
Greetings,
Wim.
On Fri, Dec 23, 2016 at 2:07 AM, Wim Van Sebroeck <[email protected]> wrote:
> Hi Linus,
>
> Due to time constraints and personal issues Guenter and I decided that this window will be a pull from another location.
> So please pull from 'watchdog-for-linus-v4.10' branch of
No shortlog, no diffstat. I won't be pulling, because I have no way to
validate what I actually get.
Linus
On Fri, Dec 23, 2016 at 10:22:06AM -0800, Linus Torvalds wrote:
> On Fri, Dec 23, 2016 at 2:07 AM, Wim Van Sebroeck <[email protected]> wrote:
> > Hi Linus,
> >
> > Due to time constraints and personal issues Guenter and I decided that this window will be a pull from another location.
> > So please pull from 'watchdog-for-linus-v4.10' branch of
>
> No shortlog, no diffstat. I won't be pulling, because I have no way to
> validate what I actually get.
>
FWIW:
------
The following changes since commit 69973b830859bc6529a7a0468ba0d80ee5117826:
Linux 4.9 (2016-12-11 11:17:54 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/watchdog-for-linus-v4.10
for you to fetch changes up to 067161281f428aa7c6e153e06aab7b5fe1ed1e98:
watchdog: it87_wdt: add IT8620E ID (2016-12-16 06:53:56 -0800)
----------------------------------------------------------------
Watchdog updates for v4.10
New driver for Add Loongson1 SoC.
Minor cleanup and fixes in various drivers.
----------------------------------------------------------------
Alexander Usyskin (1):
watchdog: mei_wdt: request stop on reboot to prevent false positive event
Amit Kushwaha (1):
watchdog: cpwd: remove memory allocate failure message
Andy Shevchenko (2):
intel-mid_wdt: make sure watchdog is not running at startup
intel-mid_wdt: Error code is just an integer
Christian Lamparter (1):
watchdog: qcom: fix kernel panic due to external abort on non-linefetch
Corentin Labbe (2):
watchdog: octeon: Remove unneeded linux/miscdevice.h include
watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include
Javier Martinez Canillas (3):
watchdog: bcm7038_wdt: fix module autoload
watchdog: max77620_wdt: fix module autoload
watchdog: meson: Remove unneeded platform MODULE_ALIAS
Jimmy Vance (1):
watchdog: hpwdt: changed maintainer information
Maciej S. Szmigiero (1):
watchdog: it87_wdt: add IT8620E ID
Rasmus Villemoes (1):
watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
Robert P. J. Day (1):
watchdog: Standardize leading tabs and spaces in Kconfig file
Stephen Boyd (1):
watchdog: jz4740: Fix modular build
Steve Twiss (1):
watchdog: da9062/61: watchdog driver
Tero Kristo (1):
watchdog: davinci: add support for deferred probing
Yang Ling (1):
watchdog: loongson1: Add Loongson1 SoC watchdog driver
MAINTAINERS | 2 +-
drivers/watchdog/Kconfig | 49 ++++++-----
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 20 +++++
drivers/watchdog/bcm7038_wdt.c | 1 +
drivers/watchdog/cpwd.c | 23 ++---
drivers/watchdog/da9062_wdt.c | 12 ++-
drivers/watchdog/davinci_wdt.c | 6 +-
drivers/watchdog/intel-mid_wdt.c | 22 ++---
drivers/watchdog/it87_wdt.c | 4 +-
drivers/watchdog/jz4740_wdt.c | 2 +-
drivers/watchdog/loongson1_wdt.c | 170 +++++++++++++++++++++++++++++++++++++
drivers/watchdog/max77620_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 2 +
drivers/watchdog/meson_gxbb_wdt.c | 1 -
drivers/watchdog/mpc8xxx_wdt.c | 1 -
drivers/watchdog/octeon-wdt-main.c | 1 -
drivers/watchdog/qcom-wdt.c | 2 +-
18 files changed, 262 insertions(+), 58 deletions(-)
create mode 100644 drivers/watchdog/loongson1_wdt.c
On Fri, Dec 23, 2016 at 11:40 AM, Guenter Roeck <[email protected]> wrote:
>
> FWIW:
Hey, I can generate those myself.
But when they aren't generated by the person who sends the pull
request, they are worthless.
The whole point is that I need to get it with the pull request, so
that I can see that what I get is what the requester really meant for
me to get, and that (hopefully) the person who made the request looked
it over and there's nothing surprising to that person either.
Linus
On 12/23/2016 11:45 AM, Linus Torvalds wrote:
> On Fri, Dec 23, 2016 at 11:40 AM, Guenter Roeck <[email protected]> wrote:
>>
>> FWIW:
>
> Hey, I can generate those myself.
>
> But when they aren't generated by the person who sends the pull
> request, they are worthless.
>
> The whole point is that I need to get it with the pull request, so
> that I can see that what I get is what the requester really meant for
> me to get, and that (hopefully) the person who made the request looked
> it over and there's nothing surprising to that person either.
>
Ok, point taken. Guess Wim should have asked me to send the pull request.
Guenter
Hi Linus, Guenter,
> On 12/23/2016 11:45 AM, Linus Torvalds wrote:
> >On Fri, Dec 23, 2016 at 11:40 AM, Guenter Roeck <[email protected]> wrote:
> >>
> >>FWIW:
> >
> >Hey, I can generate those myself.
> >
> >But when they aren't generated by the person who sends the pull
> >request, they are worthless.
> >
> >The whole point is that I need to get it with the pull request, so
> >that I can see that what I get is what the requester really meant for
> >me to get, and that (hopefully) the person who made the request looked
> >it over and there's nothing surprising to that person either.
> >
>
> Ok, point taken. Guess Wim should have asked me to send the pull request.
Yep, co-maintainership is not well defined I guess. I will sent out a new pull-request
with the necessary info in it.
Kind regards,
Wim.
Hi Linus,
Due to time constraints and personal issues Guenter and I decided that this window will be a pull from another location.
We got it wrong the first time, so here is our second request (together with our humble apologies).
(I also hope that Guenters tree is signed, it normally is, but if it isn't then you have another thing to blame us...).
So could you please pull from the 'watchdog-for-linus-v4.10' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
It contains the following patches:
* Add Loongson1 SoC watchdog driver
* Add da9061 watchdog device
* Add IT8620E watchdog device
* module load /unload fixes for bcm7083_wdt, max77620_wdt and jz4740
* intel-mid_wdt fixes
* and other fixes and cleanups
This will update the following files:
MAINTAINERS | 2
drivers/watchdog/Kconfig | 49 ++++++----
drivers/watchdog/Makefile | 1
drivers/watchdog/bcm2835_wdt.c | 20 ++++
drivers/watchdog/bcm7038_wdt.c | 1
drivers/watchdog/cpwd.c | 23 +----
drivers/watchdog/da9062_wdt.c | 12 ++
drivers/watchdog/davinci_wdt.c | 6 +
drivers/watchdog/intel-mid_wdt.c | 22 ++--
drivers/watchdog/it87_wdt.c | 4
drivers/watchdog/jz4740_wdt.c | 2
drivers/watchdog/loongson1_wdt.c | 170 +++++++++++++++++++++++++++++++++++++
drivers/watchdog/max77620_wdt.c | 1
drivers/watchdog/mei_wdt.c | 2
drivers/watchdog/meson_gxbb_wdt.c | 1
drivers/watchdog/mpc8xxx_wdt.c | 1
drivers/watchdog/octeon-wdt-main.c | 1
drivers/watchdog/qcom-wdt.c | 2
18 files changed, 262 insertions(+), 58 deletions(-)
with these Changes:
commit 067161281f428aa7c6e153e06aab7b5fe1ed1e98
Author: Maciej S. Szmigiero <[email protected]>
Date: Thu Dec 15 23:52:36 2016 +0100
watchdog: it87_wdt: add IT8620E ID
This adds IT8620E chip ID to it87_wdt driver.
Such chip is often found on current Gigabyte motherboards, it is allegedly
custom made for this manufacturer.
Upon testing it looks like it has a 16-bit timer and cannot be reset via
game port (only via CIR), so it is similar to IT87{18,20,21,28,83} chips.
Tested on GA-F2A88XM-HD3P board.
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit f01d74cc5a2aefa0ba16e2821086a1f2d0a2c899
Author: Corentin Labbe <[email protected]>
Date: Thu Dec 15 19:03:44 2016 +0100
watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include
watchdog/mpc8xxx_wdt.c does not use any miscdevice so this patch remove
this unnecessary inclusion.
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 724284a323c4cdea6c1bb1448247ffc858f2bd1d
Author: Corentin Labbe <[email protected]>
Date: Thu Dec 15 18:49:29 2016 +0100
watchdog: octeon: Remove unneeded linux/miscdevice.h include
watchdog/octeon-wdt-main.c does not use any miscdevice so this patch
remove this unnecessary inclusion.
Signed-off-by: Corentin Labbe <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 054ae19422859c394d5f26a8756ed57d332f6284
Author: Rasmus Villemoes <[email protected]>
Date: Mon Dec 12 10:48:43 2016 +0100
watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
A bootloader may start the watchdog device before handing control to
the kernel - in that case, we should tell the kernel about it so the
watchdog framework can keep it alive until userspace opens
/dev/watchdog0.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Eric Anholt <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 1d8565ee4f5bd9fccb738e53d6b9fc7a559f7d2b
Author: Yang Ling <[email protected]>
Date: Thu Dec 8 00:10:58 2016 +0800
watchdog: loongson1: Add Loongson1 SoC watchdog driver
Add watchdog timer specific driver for Loongson1 SoC.
Signed-off-by: Yang Ling <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit b6621df5c87603310c3f94903bb30adbfeb9aa69
Author: Amit Kushwaha <[email protected]>
Date: Tue Dec 6 10:19:48 2016 -0800
watchdog: cpwd: remove memory allocate failure message
Replaced goto with a return statement and dropped the kfree()
calls because memory allocated with devm_kzalloc() is
automatically freed on driver detach
Signed-off-by: Amit Kushwaha <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 72106c1894aa4e26ab403282cc7617fcb07d3d4d
Author: Steve Twiss <[email protected]>
Date: Mon Nov 14 08:22:45 2016 +0000
watchdog: da9062/61: watchdog driver
The of_device_id match array is added to support "dlg,da9062-watchdog"
as a valid .compatible string. A MODULE_DEVICE_TABLE() macro is added.
This patch assumes the use of a DA9062 fallback compatible string for the
DTS to pick up the DA9062 device driver for use with the DA9061 watchdog
hardware
Copyright header is updated to add DA9061 in its description and the module
description macro is extended to include DA9061.
Kconfig is updated to reflect support for DA9061/62.
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Steve Twiss <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit bb79036215e2ca9d7ef5bd1461981396989c40da
Author: Andy Shevchenko <[email protected]>
Date: Fri Nov 18 17:24:41 2016 +0200
intel-mid_wdt: Error code is just an integer
Error code when printed is more readable if it's represented as plain decimal
integer. Otherwise user will see something like
intel_mid_wdt: Error stopping watchdog: 0xffffffed
which is not quite understandable ("Should I interpret it as a bitfield?").
Make it clear to use plaint integer specifier.
While here, move struct device *dev local variable definition to the top of
functions.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 31ecad65b011d64dfc80cab7c968078171aa2642
Author: Andy Shevchenko <[email protected]>
Date: Fri Nov 18 16:50:02 2016 +0200
intel-mid_wdt: make sure watchdog is not running at startup
Make sure that the watchdog is not running after loading
and before it is started by opening /dev/watchdog.
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 9eff1140a82db8c5520f76e51c21827b4af670b3
Author: Alexander Usyskin <[email protected]>
Date: Tue Nov 8 17:55:52 2016 +0200
watchdog: mei_wdt: request stop on reboot to prevent false positive event
Systemd on reboot enables shutdown watchdog that leaves the watchdog
device open to ensure that even if power down process get stuck the
platform reboots nonetheless.
The iamt_wdt is an alarm-only watchdog and can't reboot system, but the
FW will generate an alarm event reboot was completed in time, as the
watchdog is not automatically disabled during power cycle.
So we should request stop watchdog on reboot to eliminate wrong alarm
from the FW.
Cc: <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 4cfccbdaa234b6564326ed3bf18c38f73693fe14
Author: Jimmy Vance <[email protected]>
Date: Thu Nov 10 15:25:27 2016 -0500
watchdog: hpwdt: changed maintainer information
Signed-off-by: Jimmy Vance <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 35ffa961df7ed13b3701bdb546f08849921e50dc
Author: Stephen Boyd <[email protected]>
Date: Thu Nov 10 16:02:20 2016 -0800
watchdog: jz4740: Fix modular build
Compiling this driver as a module causes a build error because a
semicolon is missing after MODULE_DEVICE_TABLE. Add it.
CC [M] drivers/watchdog/jz4740_wdt.o
drivers/watchdog/jz4740_wdt.c:154:1: error: expected ‘,’ or ‘;’ before ‘static’
drivers/watchdog/jz4740_wdt.c:218:11: error: ‘jz4740_wdt_probe’ undeclared here (not in a function)
Cc: Zubair Lutfullah Kakakhel <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit f06f35c66fdbd5ac38901a3305ce763a0cd59375
Author: Christian Lamparter <[email protected]>
Date: Mon Nov 14 02:11:16 2016 +0100
watchdog: qcom: fix kernel panic due to external abort on non-linefetch
This patch fixes a off-by-one in the "watchdog: qcom: add option for
standalone watchdog not in timer block" patch that causes the
following panic on boot:
> Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8874002
> pgd = c0204000
> [c8874002] *pgd=87806811, *pte=0b017653, *ppte=0b017453
> Internal error: : 1008 [#1] SMP ARM
> CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.6 #0
> Hardware name: Generic DT based system
> PC is at 0xc02222f4
> LR is at 0x1
> pc : [<c02222f4>] lr : [<00000001>] psr: 00000113
> sp : c782fc98 ip : 00000003 fp : 00000000
> r10: 00000004 r9 : c782e000 r8 : c04ab98c
> r7 : 00000001 r6 : c8874002 r5 : c782fe00 r4 : 00000002
> r3 : 00000000 r2 : c782fe00 r1 : 00100000 r0 : c8874002
> Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> Control: 10c5387d Table: 8020406a DAC: 00000051
> Process swapper/0 (pid: 1, stack limit = 0xc782e210)
> Stack: (0xc782fc98 to 0xc7830000)
> [...]
The WDT_STS (status) needs to be translated via wdt_addr as well.
fixes: f0d9d0f4b44a ("watchdog: qcom: add option for standalone watchdog not in timer block")
Cc: [email protected] # 4.8
Signed-off-by: Christian Lamparter <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 9b3865749589d67f612d71b447847223b2321408
Author: Tero Kristo <[email protected]>
Date: Thu Nov 24 14:58:28 2016 +0200
watchdog: davinci: add support for deferred probing
devm_clk_get can fail with EPROBE_DEFER in case the clock provider is
not ready yet. Handle this case gracefully, rather than dumping out
a huge warning.
Signed-off-by: Tero Kristo <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 807f0b2d22b0934fc1c67df8a4961044bd76b081
Author: Javier Martinez Canillas <[email protected]>
Date: Wed Oct 19 16:49:42 2016 -0300
watchdog: meson: Remove unneeded platform MODULE_ALIAS
The Amlogic Meson is a DT-only platform, which means the devices are
registered via OF and not using the legacy platform devices support.
So there's no need to have a MODULE_ALIAS("platform:meson-gxbb-wdt")
since the reported uevent MODALIAS to user-space will be the OF one.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 0f3871f8a535d7e79512fe56f4a5a161b3a03422
Author: Robert P. J. Day <[email protected]>
Date: Sun Oct 16 08:10:37 2016 -0400
watchdog: Standardize leading tabs and spaces in Kconfig file
Replace small number of lines using leading spaces with proper leading
tabs and spaces -- purely an aesthetic fix.
Signed-off-by: Robert P. J. Day <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit f99524dced4c89af52a82a369cb61a111b9169b3
Author: Javier Martinez Canillas <[email protected]>
Date: Fri Oct 14 12:23:51 2016 -0300
watchdog: max77620_wdt: fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ $ modinfo drivers/watchdog/max77620_wdt.ko | grep alias
$
After this patch:
modinfo drivers/watchdog/max77620_wdt.ko | grep alias
alias: platform:max77620-watchdog
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
commit 57d77c62536ea0f388c840c8ac7e94be54425308
Author: Javier Martinez Canillas <[email protected]>
Date: Fri Oct 14 12:23:50 2016 -0300
watchdog: bcm7038_wdt: fix module autoload
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.
Export the module alias information using the MODULE_DEVICE_TABLE() macro.
Before this patch:
$ modinfo drivers/watchdog/bcm7038_wdt.ko | grep alias
$
After this patch:
$ modinfo drivers/watchdog/bcm7038_wdt.ko | grep alias
alias: of:N*T*Cbrcm,bcm7038-wdtC*
alias: of:N*T*Cbrcm,bcm7038-wdt
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
For completeness, I added the overal diff below.
Greetings,
Wim.
================================================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 63cefa6..f5e05d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5613,7 +5613,7 @@ S: Maintained
F: drivers/media/dvb-frontends/hd29l2*
HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
-M: Brian Boylston <[email protected]>
+M: Jimmy Vance <[email protected]>
S: Supported
F: Documentation/watchdog/hpwdt.txt
F: drivers/watchdog/hpwdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3eb58cb..acb00b5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -72,16 +72,16 @@ config SOFT_WATCHDOG
module will be called softdog.
config DA9052_WATCHDOG
- tristate "Dialog DA9052 Watchdog"
- depends on PMIC_DA9052
- select WATCHDOG_CORE
- help
- Support for the watchdog in the DA9052 PMIC. Watchdog trigger
- cause system reset.
+ tristate "Dialog DA9052 Watchdog"
+ depends on PMIC_DA9052
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9052 PMIC. Watchdog trigger
+ cause system reset.
- Say Y here to include support for the DA9052 watchdog.
- Alternatively say M to compile the driver as a module,
- which will be called da9052_wdt.
+ Say Y here to include support for the DA9052 watchdog.
+ Alternatively say M to compile the driver as a module,
+ which will be called da9052_wdt.
config DA9055_WATCHDOG
tristate "Dialog Semiconductor DA9055 Watchdog"
@@ -104,11 +104,11 @@ config DA9063_WATCHDOG
This driver can be built as a module. The module name is da9063_wdt.
config DA9062_WATCHDOG
- tristate "Dialog DA9062 Watchdog"
+ tristate "Dialog DA9062/61 Watchdog"
depends on MFD_DA9062
select WATCHDOG_CORE
help
- Support for the watchdog in the DA9062 PMIC.
+ Support for the watchdog in the DA9062 and DA9061 PMICs.
This driver can be built as a module. The module name is da9062_wdt.
@@ -1008,8 +1008,8 @@ config IT87_WDT
tristate "IT87 Watchdog Timer"
depends on X86
---help---
- This is the driver for the hardware watchdog on the ITE IT8702,
- IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
+ This is the driver for the hardware watchdog on the ITE IT8620,
+ IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
Super I/O chips.
If the driver does not work, then make sure that the game port in
@@ -1514,6 +1514,13 @@ config LANTIQ_WDT
help
Hardware driver for the Lantiq SoC Watchdog Timer.
+config LOONGSON1_WDT
+ tristate "Loongson1 SoC hardware watchdog"
+ depends on MACH_LOONGSON32
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the Loongson1 SoC Watchdog Timer.
+
config RALINK_WDT
tristate "Ralink SoC watchdog"
select WATCHDOG_CORE
@@ -1624,16 +1631,16 @@ config BOOKE_WDT_DEFAULT_TIMEOUT
The value can be overridden by the wdt_period command-line parameter.
config MEN_A21_WDT
- tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
- select WATCHDOG_CORE
- depends on GPIOLIB || COMPILE_TEST
- help
- Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
+ tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
+ select WATCHDOG_CORE
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
- The driver can also be built as a module. If so, the module will be
- called mena21_wdt.
+ The driver can also be built as a module. If so, the module will be
+ called mena21_wdt.
- If unsure select N here.
+ If unsure select N here.
# PPC64 Architecture
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index caa9f4a..0c3d35e 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -163,6 +163,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index 4dddd82..c32c45b 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -55,6 +55,15 @@ struct bcm2835_wdt {
static unsigned int heartbeat;
static bool nowayout = WATCHDOG_NOWAYOUT;
+static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
+{
+ uint32_t cur;
+
+ cur = readl(wdt->base + PM_RSTC);
+
+ return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
+}
+
static int bcm2835_wdt_start(struct watchdog_device *wdog)
{
struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
@@ -181,6 +190,17 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
bcm2835_wdt_wdd.parent = &pdev->dev;
+ if (bcm2835_wdt_is_running(wdt)) {
+ /*
+ * The currently active timeout value (set by the
+ * bootloader) may be different from the module
+ * heartbeat parameter or the value in device
+ * tree. But we just need to set WDOG_HW_RUNNING,
+ * because then the framework will "immediately" ping
+ * the device, updating the timeout.
+ */
+ set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status);
+ }
err = watchdog_register_device(&bcm2835_wdt_wdd);
if (err) {
dev_err(dev, "Failed to register watchdog device");
diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
index e238df4..4814c00 100644
--- a/drivers/watchdog/bcm7038_wdt.c
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -216,6 +216,7 @@ static const struct of_device_id bcm7038_wdt_match[] = {
{ .compatible = "brcm,bcm7038-wdt" },
{},
};
+MODULE_DEVICE_TABLE(of, bcm7038_wdt_match);
static struct platform_driver bcm7038_wdt_driver = {
.probe = bcm7038_wdt_probe,
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
index 71ee079..3d43775 100644
--- a/drivers/watchdog/cpwd.c
+++ b/drivers/watchdog/cpwd.c
@@ -538,12 +538,9 @@ static int cpwd_probe(struct platform_device *op)
if (cpwd_device)
return -EINVAL;
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- err = -ENOMEM;
- if (!p) {
- pr_err("Unable to allocate struct cpwd\n");
- goto out;
- }
+ p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
p->irq = op->archdata.irqs[0];
@@ -553,12 +550,12 @@ static int cpwd_probe(struct platform_device *op)
4 * WD_TIMER_REGSZ, DRIVER_NAME);
if (!p->regs) {
pr_err("Unable to map registers\n");
- goto out_free;
+ return -ENOMEM;
}
options = of_find_node_by_path("/options");
- err = -ENODEV;
if (!options) {
+ err = -ENODEV;
pr_err("Unable to find /options node\n");
goto out_iounmap;
}
@@ -620,10 +617,7 @@ static int cpwd_probe(struct platform_device *op)
platform_set_drvdata(op, p);
cpwd_device = p;
- err = 0;
-
-out:
- return err;
+ return 0;
out_unregister:
for (i--; i >= 0; i--)
@@ -632,9 +626,7 @@ out_unregister:
out_iounmap:
of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
-out_free:
- kfree(p);
- goto out;
+ return err;
}
static int cpwd_remove(struct platform_device *op)
@@ -659,7 +651,6 @@ static int cpwd_remove(struct platform_device *op)
free_irq(p->irq, p);
of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
- kfree(p);
cpwd_device = NULL;
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index 7386111..a02cee6 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -1,5 +1,5 @@
/*
- * da9062_wdt.c - WDT device driver for DA9062
+ * Watchdog device driver for DA9062 and DA9061 PMICs
* Copyright (C) 2015 Dialog Semiconductor Ltd.
*
* This program is free software; you can redistribute it and/or
@@ -188,6 +188,13 @@ static const struct watchdog_ops da9062_watchdog_ops = {
.set_timeout = da9062_wdt_set_timeout,
};
+static const struct of_device_id da9062_compatible_id_table[] = {
+ { .compatible = "dlg,da9062-watchdog", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, da9062_compatible_id_table);
+
static int da9062_wdt_probe(struct platform_device *pdev)
{
int ret;
@@ -244,11 +251,12 @@ static struct platform_driver da9062_wdt_driver = {
.remove = da9062_wdt_remove,
.driver = {
.name = "da9062-watchdog",
+ .of_match_table = da9062_compatible_id_table,
},
};
module_platform_driver(da9062_wdt_driver);
MODULE_AUTHOR("S Twiss <[email protected]>");
-MODULE_DESCRIPTION("WDT device driver for Dialog DA9062");
+MODULE_DESCRIPTION("WDT device driver for Dialog DA9062 and DA9061");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9062-watchdog");
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 17454ca..0e731d7 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -166,8 +166,12 @@ static int davinci_wdt_probe(struct platform_device *pdev)
return -ENOMEM;
davinci_wdt->clk = devm_clk_get(dev, NULL);
- if (WARN_ON(IS_ERR(davinci_wdt->clk)))
+
+ if (IS_ERR(davinci_wdt->clk)) {
+ if (PTR_ERR(davinci_wdt->clk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to get clock node\n");
return PTR_ERR(davinci_wdt->clk);
+ }
clk_prepare_enable(davinci_wdt->clk);
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
index db36d12..a4b7292 100644
--- a/drivers/watchdog/intel-mid_wdt.c
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -43,6 +43,7 @@ static inline int wdt_command(int sub, u32 *in, int inlen)
static int wdt_start(struct watchdog_device *wd)
{
+ struct device *dev = watchdog_get_drvdata(wd);
int ret, in_size;
int timeout = wd->timeout;
struct ipc_wd_start {
@@ -57,36 +58,32 @@ static int wdt_start(struct watchdog_device *wd)
in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4);
ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size);
- if (ret) {
- struct device *dev = watchdog_get_drvdata(wd);
+ if (ret)
dev_crit(dev, "error starting watchdog: %d\n", ret);
- }
return ret;
}
static int wdt_ping(struct watchdog_device *wd)
{
+ struct device *dev = watchdog_get_drvdata(wd);
int ret;
ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0);
- if (ret) {
- struct device *dev = watchdog_get_drvdata(wd);
- dev_crit(dev, "Error executing keepalive: 0x%x\n", ret);
- }
+ if (ret)
+ dev_crit(dev, "Error executing keepalive: %d\n", ret);
return ret;
}
static int wdt_stop(struct watchdog_device *wd)
{
+ struct device *dev = watchdog_get_drvdata(wd);
int ret;
ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0);
- if (ret) {
- struct device *dev = watchdog_get_drvdata(wd);
- dev_crit(dev, "Error stopping watchdog: 0x%x\n", ret);
- }
+ if (ret)
+ dev_crit(dev, "Error stopping watchdog: %d\n", ret);
return ret;
}
@@ -151,6 +148,9 @@ static int mid_wdt_probe(struct platform_device *pdev)
return ret;
}
+ /* Make sure the watchdog is not running */
+ wdt_stop(wdt_dev);
+
ret = watchdog_register_device(wdt_dev);
if (ret) {
dev_err(&pdev->dev, "error registering watchdog device\n");
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
index e54839b..b9878c4 100644
--- a/drivers/watchdog/it87_wdt.c
+++ b/drivers/watchdog/it87_wdt.c
@@ -12,7 +12,7 @@
* http://www.ite.com.tw/
*
* Support of the watchdog timers, which are available on
- * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726,
+ * IT8620, IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726,
* IT8728 and IT8783.
*
* This program is free software; you can redistribute it and/or
@@ -78,6 +78,7 @@
/* Chip Id numbers */
#define NO_DEV_ID 0xffff
+#define IT8620_ID 0x8620
#define IT8702_ID 0x8702
#define IT8705_ID 0x8705
#define IT8712_ID 0x8712
@@ -630,6 +631,7 @@ static int __init it87_wdt_init(void)
case IT8726_ID:
max_units = 65535;
break;
+ case IT8620_ID:
case IT8718_ID:
case IT8720_ID:
case IT8721_ID:
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index c8d51dd..20627f2 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -148,7 +148,7 @@ static const struct of_device_id jz4740_wdt_of_matches[] = {
{ .compatible = "ingenic,jz4740-watchdog", },
{ /* sentinel */ }
};
-MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches)
+MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches);
#endif
static int jz4740_wdt_probe(struct platform_device *pdev)
diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
new file mode 100644
index 0000000..3aee50c
--- /dev/null
+++ b/drivers/watchdog/loongson1_wdt.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2016 Yang Ling <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <loongson1.h>
+
+#define DEFAULT_HEARTBEAT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+
+static unsigned int heartbeat;
+module_param(heartbeat, uint, 0444);
+
+struct ls1x_wdt_drvdata {
+ void __iomem *base;
+ struct clk *clk;
+ unsigned long clk_rate;
+ struct watchdog_device wdt;
+};
+
+static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+ writel(0x1, drvdata->base + WDT_SET);
+
+ return 0;
+}
+
+static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+ unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000;
+ unsigned int counts;
+
+ wdt_dev->timeout = timeout;
+
+ counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat);
+ writel(counts, drvdata->base + WDT_TIMER);
+
+ return 0;
+}
+
+static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+ writel(0x1, drvdata->base + WDT_EN);
+
+ return 0;
+}
+
+static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+ writel(0x0, drvdata->base + WDT_EN);
+
+ return 0;
+}
+
+static const struct watchdog_info ls1x_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "Loongson1 Watchdog",
+};
+
+static const struct watchdog_ops ls1x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ls1x_wdt_start,
+ .stop = ls1x_wdt_stop,
+ .ping = ls1x_wdt_ping,
+ .set_timeout = ls1x_wdt_set_timeout,
+};
+
+static int ls1x_wdt_probe(struct platform_device *pdev)
+{
+ struct ls1x_wdt_drvdata *drvdata;
+ struct watchdog_device *ls1x_wdt;
+ unsigned long clk_rate;
+ struct resource *res;
+ int err;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(drvdata->base))
+ return PTR_ERR(drvdata->base);
+
+ drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(drvdata->clk))
+ return PTR_ERR(drvdata->clk);
+
+ err = clk_prepare_enable(drvdata->clk);
+ if (err) {
+ dev_err(&pdev->dev, "clk enable failed\n");
+ return err;
+ }
+
+ clk_rate = clk_get_rate(drvdata->clk);
+ if (!clk_rate) {
+ err = -EINVAL;
+ goto err0;
+ }
+ drvdata->clk_rate = clk_rate;
+
+ ls1x_wdt = &drvdata->wdt;
+ ls1x_wdt->info = &ls1x_wdt_info;
+ ls1x_wdt->ops = &ls1x_wdt_ops;
+ ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
+ ls1x_wdt->min_timeout = 1;
+ ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000;
+ ls1x_wdt->parent = &pdev->dev;
+
+ watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
+ watchdog_set_nowayout(ls1x_wdt, nowayout);
+ watchdog_set_drvdata(ls1x_wdt, drvdata);
+
+ err = watchdog_register_device(&drvdata->wdt);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register watchdog device\n");
+ goto err0;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
+
+ return 0;
+err0:
+ clk_disable_unprepare(drvdata->clk);
+ return err;
+}
+
+static int ls1x_wdt_remove(struct platform_device *pdev)
+{
+ struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&drvdata->wdt);
+ clk_disable_unprepare(drvdata->clk);
+
+ return 0;
+}
+
+static struct platform_driver ls1x_wdt_driver = {
+ .probe = ls1x_wdt_probe,
+ .remove = ls1x_wdt_remove,
+ .driver = {
+ .name = "ls1x-wdt",
+ },
+};
+
+module_platform_driver(ls1x_wdt_driver);
+
+MODULE_AUTHOR("Yang Ling <[email protected]>");
+MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/max77620_wdt.c b/drivers/watchdog/max77620_wdt.c
index 48b84df..68c41fa 100644
--- a/drivers/watchdog/max77620_wdt.c
+++ b/drivers/watchdog/max77620_wdt.c
@@ -205,6 +205,7 @@ static struct platform_device_id max77620_wdt_devtype[] = {
{ .name = "max77620-watchdog", },
{ },
};
+MODULE_DEVICE_TABLE(platform, max77620_wdt_devtype);
static struct platform_driver max77620_wdt_driver = {
.driver = {
diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
index 630bd18..2a9d5cd 100644
--- a/drivers/watchdog/mei_wdt.c
+++ b/drivers/watchdog/mei_wdt.c
@@ -389,6 +389,8 @@ static int mei_wdt_register(struct mei_wdt *wdt)
wdt->wdd.max_timeout = MEI_WDT_MAX_TIMEOUT;
watchdog_set_drvdata(&wdt->wdd, wdt);
+ watchdog_stop_on_reboot(&wdt->wdd);
+
ret = watchdog_register_device(&wdt->wdd);
if (ret) {
dev_err(dev, "unable to register watchdog device = %d.\n", ret);
diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index 44d180a..45d4766 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -264,7 +264,6 @@ static struct platform_driver meson_gxbb_wdt_driver = {
module_platform_driver(meson_gxbb_wdt_driver);
-MODULE_ALIAS("platform:meson-gxbb-wdt");
MODULE_AUTHOR("Neil Armstrong <[email protected]>");
MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver");
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 5f2273a..366e5c7 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -23,7 +23,6 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/timer.h>
-#include <linux/miscdevice.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/module.h>
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
index b55981f..8b4fa4d 100644
--- a/drivers/watchdog/octeon-wdt-main.c
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -56,7 +56,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/miscdevice.h>
#include <linux/interrupt.h>
#include <linux/watchdog.h>
#include <linux/cpumask.h>
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index 5796b5d..4f47b5e 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -209,7 +209,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
wdt->wdd.parent = &pdev->dev;
wdt->layout = regs;
- if (readl(wdt->base + WDT_STS) & 1)
+ if (readl(wdt_addr(wdt, WDT_STS)) & 1)
wdt->wdd.bootstatus = WDIOF_CARDRESET;
/*
On 12/24/2016 06:39 AM, Wim Van Sebroeck wrote:
> Hi Linus,
>
> Due to time constraints and personal issues Guenter and I decided that this window will be a pull from another location.
> We got it wrong the first time, so here is our second request (together with our humble apologies).
> (I also hope that Guenters tree is signed, it normally is, but if it isn't then you have another thing to blame us...).
>
> So could you please pull from the 'watchdog-for-linus-v4.10' branch of
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
That is a tag, not a branch, and, yes, it is signed :-)
Guenter
>
> It contains the following patches:
> * Add Loongson1 SoC watchdog driver
> * Add da9061 watchdog device
> * Add IT8620E watchdog device
> * module load /unload fixes for bcm7083_wdt, max77620_wdt and jz4740
> * intel-mid_wdt fixes
> * and other fixes and cleanups
>
> This will update the following files:
>
> MAINTAINERS | 2
> drivers/watchdog/Kconfig | 49 ++++++----
> drivers/watchdog/Makefile | 1
> drivers/watchdog/bcm2835_wdt.c | 20 ++++
> drivers/watchdog/bcm7038_wdt.c | 1
> drivers/watchdog/cpwd.c | 23 +----
> drivers/watchdog/da9062_wdt.c | 12 ++
> drivers/watchdog/davinci_wdt.c | 6 +
> drivers/watchdog/intel-mid_wdt.c | 22 ++--
> drivers/watchdog/it87_wdt.c | 4
> drivers/watchdog/jz4740_wdt.c | 2
> drivers/watchdog/loongson1_wdt.c | 170 +++++++++++++++++++++++++++++++++++++
> drivers/watchdog/max77620_wdt.c | 1
> drivers/watchdog/mei_wdt.c | 2
> drivers/watchdog/meson_gxbb_wdt.c | 1
> drivers/watchdog/mpc8xxx_wdt.c | 1
> drivers/watchdog/octeon-wdt-main.c | 1
> drivers/watchdog/qcom-wdt.c | 2
> 18 files changed, 262 insertions(+), 58 deletions(-)
>
> with these Changes:
>
> commit 067161281f428aa7c6e153e06aab7b5fe1ed1e98
> Author: Maciej S. Szmigiero <[email protected]>
> Date: Thu Dec 15 23:52:36 2016 +0100
>
> watchdog: it87_wdt: add IT8620E ID
>
> This adds IT8620E chip ID to it87_wdt driver.
> Such chip is often found on current Gigabyte motherboards, it is allegedly
> custom made for this manufacturer.
>
> Upon testing it looks like it has a 16-bit timer and cannot be reset via
> game port (only via CIR), so it is similar to IT87{18,20,21,28,83} chips.
>
> Tested on GA-F2A88XM-HD3P board.
>
> Signed-off-by: Maciej S. Szmigiero <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit f01d74cc5a2aefa0ba16e2821086a1f2d0a2c899
> Author: Corentin Labbe <[email protected]>
> Date: Thu Dec 15 19:03:44 2016 +0100
>
> watchdog: mpc8xxx: Remove unneeded linux/miscdevice.h include
>
> watchdog/mpc8xxx_wdt.c does not use any miscdevice so this patch remove
> this unnecessary inclusion.
>
> Signed-off-by: Corentin Labbe <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 724284a323c4cdea6c1bb1448247ffc858f2bd1d
> Author: Corentin Labbe <[email protected]>
> Date: Thu Dec 15 18:49:29 2016 +0100
>
> watchdog: octeon: Remove unneeded linux/miscdevice.h include
>
> watchdog/octeon-wdt-main.c does not use any miscdevice so this patch
> remove this unnecessary inclusion.
>
> Signed-off-by: Corentin Labbe <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 054ae19422859c394d5f26a8756ed57d332f6284
> Author: Rasmus Villemoes <[email protected]>
> Date: Mon Dec 12 10:48:43 2016 +0100
>
> watchdog: bcm2835_wdt: set WDOG_HW_RUNNING bit when appropriate
>
> A bootloader may start the watchdog device before handing control to
> the kernel - in that case, we should tell the kernel about it so the
> watchdog framework can keep it alive until userspace opens
> /dev/watchdog0.
>
> Signed-off-by: Rasmus Villemoes <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Acked-by: Eric Anholt <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 1d8565ee4f5bd9fccb738e53d6b9fc7a559f7d2b
> Author: Yang Ling <[email protected]>
> Date: Thu Dec 8 00:10:58 2016 +0800
>
> watchdog: loongson1: Add Loongson1 SoC watchdog driver
>
> Add watchdog timer specific driver for Loongson1 SoC.
>
> Signed-off-by: Yang Ling <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit b6621df5c87603310c3f94903bb30adbfeb9aa69
> Author: Amit Kushwaha <[email protected]>
> Date: Tue Dec 6 10:19:48 2016 -0800
>
> watchdog: cpwd: remove memory allocate failure message
>
> Replaced goto with a return statement and dropped the kfree()
> calls because memory allocated with devm_kzalloc() is
> automatically freed on driver detach
>
> Signed-off-by: Amit Kushwaha <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 72106c1894aa4e26ab403282cc7617fcb07d3d4d
> Author: Steve Twiss <[email protected]>
> Date: Mon Nov 14 08:22:45 2016 +0000
>
> watchdog: da9062/61: watchdog driver
>
> The of_device_id match array is added to support "dlg,da9062-watchdog"
> as a valid .compatible string. A MODULE_DEVICE_TABLE() macro is added.
>
> This patch assumes the use of a DA9062 fallback compatible string for the
> DTS to pick up the DA9062 device driver for use with the DA9061 watchdog
> hardware
>
> Copyright header is updated to add DA9061 in its description and the module
> description macro is extended to include DA9061.
>
> Kconfig is updated to reflect support for DA9061/62.
>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Steve Twiss <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit bb79036215e2ca9d7ef5bd1461981396989c40da
> Author: Andy Shevchenko <[email protected]>
> Date: Fri Nov 18 17:24:41 2016 +0200
>
> intel-mid_wdt: Error code is just an integer
>
> Error code when printed is more readable if it's represented as plain decimal
> integer. Otherwise user will see something like
> intel_mid_wdt: Error stopping watchdog: 0xffffffed
> which is not quite understandable ("Should I interpret it as a bitfield?").
>
> Make it clear to use plaint integer specifier.
>
> While here, move struct device *dev local variable definition to the top of
> functions.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 31ecad65b011d64dfc80cab7c968078171aa2642
> Author: Andy Shevchenko <[email protected]>
> Date: Fri Nov 18 16:50:02 2016 +0200
>
> intel-mid_wdt: make sure watchdog is not running at startup
>
> Make sure that the watchdog is not running after loading
> and before it is started by opening /dev/watchdog.
>
> Signed-off-by: Andy Shevchenko <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 9eff1140a82db8c5520f76e51c21827b4af670b3
> Author: Alexander Usyskin <[email protected]>
> Date: Tue Nov 8 17:55:52 2016 +0200
>
> watchdog: mei_wdt: request stop on reboot to prevent false positive event
>
> Systemd on reboot enables shutdown watchdog that leaves the watchdog
> device open to ensure that even if power down process get stuck the
> platform reboots nonetheless.
> The iamt_wdt is an alarm-only watchdog and can't reboot system, but the
> FW will generate an alarm event reboot was completed in time, as the
> watchdog is not automatically disabled during power cycle.
> So we should request stop watchdog on reboot to eliminate wrong alarm
> from the FW.
>
> Cc: <[email protected]>
> Signed-off-by: Alexander Usyskin <[email protected]>
> Signed-off-by: Tomas Winkler <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 4cfccbdaa234b6564326ed3bf18c38f73693fe14
> Author: Jimmy Vance <[email protected]>
> Date: Thu Nov 10 15:25:27 2016 -0500
>
> watchdog: hpwdt: changed maintainer information
>
> Signed-off-by: Jimmy Vance <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 35ffa961df7ed13b3701bdb546f08849921e50dc
> Author: Stephen Boyd <[email protected]>
> Date: Thu Nov 10 16:02:20 2016 -0800
>
> watchdog: jz4740: Fix modular build
>
> Compiling this driver as a module causes a build error because a
> semicolon is missing after MODULE_DEVICE_TABLE. Add it.
>
> CC [M] drivers/watchdog/jz4740_wdt.o
> drivers/watchdog/jz4740_wdt.c:154:1: error: expected ‘,’ or ‘;’ before ‘static’
> drivers/watchdog/jz4740_wdt.c:218:11: error: ‘jz4740_wdt_probe’ undeclared here (not in a function)
>
> Cc: Zubair Lutfullah Kakakhel <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Signed-off-by: Stephen Boyd <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit f06f35c66fdbd5ac38901a3305ce763a0cd59375
> Author: Christian Lamparter <[email protected]>
> Date: Mon Nov 14 02:11:16 2016 +0100
>
> watchdog: qcom: fix kernel panic due to external abort on non-linefetch
>
> This patch fixes a off-by-one in the "watchdog: qcom: add option for
> standalone watchdog not in timer block" patch that causes the
> following panic on boot:
>
> > Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8874002
> > pgd = c0204000
> > [c8874002] *pgd=87806811, *pte=0b017653, *ppte=0b017453
> > Internal error: : 1008 [#1] SMP ARM
> > CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.6 #0
> > Hardware name: Generic DT based system
> > PC is at 0xc02222f4
> > LR is at 0x1
> > pc : [<c02222f4>] lr : [<00000001>] psr: 00000113
> > sp : c782fc98 ip : 00000003 fp : 00000000
> > r10: 00000004 r9 : c782e000 r8 : c04ab98c
> > r7 : 00000001 r6 : c8874002 r5 : c782fe00 r4 : 00000002
> > r3 : 00000000 r2 : c782fe00 r1 : 00100000 r0 : c8874002
> > Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> > Control: 10c5387d Table: 8020406a DAC: 00000051
> > Process swapper/0 (pid: 1, stack limit = 0xc782e210)
> > Stack: (0xc782fc98 to 0xc7830000)
> > [...]
>
> The WDT_STS (status) needs to be translated via wdt_addr as well.
>
> fixes: f0d9d0f4b44a ("watchdog: qcom: add option for standalone watchdog not in timer block")
> Cc: [email protected] # 4.8
> Signed-off-by: Christian Lamparter <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 9b3865749589d67f612d71b447847223b2321408
> Author: Tero Kristo <[email protected]>
> Date: Thu Nov 24 14:58:28 2016 +0200
>
> watchdog: davinci: add support for deferred probing
>
> devm_clk_get can fail with EPROBE_DEFER in case the clock provider is
> not ready yet. Handle this case gracefully, rather than dumping out
> a huge warning.
>
> Signed-off-by: Tero Kristo <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 807f0b2d22b0934fc1c67df8a4961044bd76b081
> Author: Javier Martinez Canillas <[email protected]>
> Date: Wed Oct 19 16:49:42 2016 -0300
>
> watchdog: meson: Remove unneeded platform MODULE_ALIAS
>
> The Amlogic Meson is a DT-only platform, which means the devices are
> registered via OF and not using the legacy platform devices support.
>
> So there's no need to have a MODULE_ALIAS("platform:meson-gxbb-wdt")
> since the reported uevent MODALIAS to user-space will be the OF one.
>
> Signed-off-by: Javier Martinez Canillas <[email protected]>
> Acked-by: Kevin Hilman <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 0f3871f8a535d7e79512fe56f4a5a161b3a03422
> Author: Robert P. J. Day <[email protected]>
> Date: Sun Oct 16 08:10:37 2016 -0400
>
> watchdog: Standardize leading tabs and spaces in Kconfig file
>
> Replace small number of lines using leading spaces with proper leading
> tabs and spaces -- purely an aesthetic fix.
>
> Signed-off-by: Robert P. J. Day <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit f99524dced4c89af52a82a369cb61a111b9169b3
> Author: Javier Martinez Canillas <[email protected]>
> Date: Fri Oct 14 12:23:51 2016 -0300
>
> watchdog: max77620_wdt: fix module autoload
>
> If the driver is built as a module, autoload won't work because the module
> alias information is not filled. So user-space can't match the registered
> device with the corresponding module.
>
> Export the module alias information using the MODULE_DEVICE_TABLE() macro.
>
> Before this patch:
>
> $ $ modinfo drivers/watchdog/max77620_wdt.ko | grep alias
> $
>
> After this patch:
>
> modinfo drivers/watchdog/max77620_wdt.ko | grep alias
> alias: platform:max77620-watchdog
>
> Signed-off-by: Javier Martinez Canillas <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
> commit 57d77c62536ea0f388c840c8ac7e94be54425308
> Author: Javier Martinez Canillas <[email protected]>
> Date: Fri Oct 14 12:23:50 2016 -0300
>
> watchdog: bcm7038_wdt: fix module autoload
>
> If the driver is built as a module, autoload won't work because the module
> alias information is not filled. So user-space can't match the registered
> device with the corresponding module.
>
> Export the module alias information using the MODULE_DEVICE_TABLE() macro.
>
> Before this patch:
>
> $ modinfo drivers/watchdog/bcm7038_wdt.ko | grep alias
> $
>
> After this patch:
>
> $ modinfo drivers/watchdog/bcm7038_wdt.ko | grep alias
> alias: of:N*T*Cbrcm,bcm7038-wdtC*
> alias: of:N*T*Cbrcm,bcm7038-wdt
>
> Signed-off-by: Javier Martinez Canillas <[email protected]>
> Reviewed-by: Guenter Roeck <[email protected]>
> Signed-off-by: Guenter Roeck <[email protected]>
>
>
> For completeness, I added the overal diff below.
>
> Greetings,
> Wim.
>
> ================================================================================
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 63cefa6..f5e05d5 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5613,7 +5613,7 @@ S: Maintained
> F: drivers/media/dvb-frontends/hd29l2*
>
> HEWLETT PACKARD ENTERPRISE ILO NMI WATCHDOG DRIVER
> -M: Brian Boylston <[email protected]>
> +M: Jimmy Vance <[email protected]>
> S: Supported
> F: Documentation/watchdog/hpwdt.txt
> F: drivers/watchdog/hpwdt.c
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 3eb58cb..acb00b5 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -72,16 +72,16 @@ config SOFT_WATCHDOG
> module will be called softdog.
>
> config DA9052_WATCHDOG
> - tristate "Dialog DA9052 Watchdog"
> - depends on PMIC_DA9052
> - select WATCHDOG_CORE
> - help
> - Support for the watchdog in the DA9052 PMIC. Watchdog trigger
> - cause system reset.
> + tristate "Dialog DA9052 Watchdog"
> + depends on PMIC_DA9052
> + select WATCHDOG_CORE
> + help
> + Support for the watchdog in the DA9052 PMIC. Watchdog trigger
> + cause system reset.
>
> - Say Y here to include support for the DA9052 watchdog.
> - Alternatively say M to compile the driver as a module,
> - which will be called da9052_wdt.
> + Say Y here to include support for the DA9052 watchdog.
> + Alternatively say M to compile the driver as a module,
> + which will be called da9052_wdt.
>
> config DA9055_WATCHDOG
> tristate "Dialog Semiconductor DA9055 Watchdog"
> @@ -104,11 +104,11 @@ config DA9063_WATCHDOG
> This driver can be built as a module. The module name is da9063_wdt.
>
> config DA9062_WATCHDOG
> - tristate "Dialog DA9062 Watchdog"
> + tristate "Dialog DA9062/61 Watchdog"
> depends on MFD_DA9062
> select WATCHDOG_CORE
> help
> - Support for the watchdog in the DA9062 PMIC.
> + Support for the watchdog in the DA9062 and DA9061 PMICs.
>
> This driver can be built as a module. The module name is da9062_wdt.
>
> @@ -1008,8 +1008,8 @@ config IT87_WDT
> tristate "IT87 Watchdog Timer"
> depends on X86
> ---help---
> - This is the driver for the hardware watchdog on the ITE IT8702,
> - IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
> + This is the driver for the hardware watchdog on the ITE IT8620,
> + IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
> Super I/O chips.
>
> If the driver does not work, then make sure that the game port in
> @@ -1514,6 +1514,13 @@ config LANTIQ_WDT
> help
> Hardware driver for the Lantiq SoC Watchdog Timer.
>
> +config LOONGSON1_WDT
> + tristate "Loongson1 SoC hardware watchdog"
> + depends on MACH_LOONGSON32
> + select WATCHDOG_CORE
> + help
> + Hardware driver for the Loongson1 SoC Watchdog Timer.
> +
> config RALINK_WDT
> tristate "Ralink SoC watchdog"
> select WATCHDOG_CORE
> @@ -1624,16 +1631,16 @@ config BOOKE_WDT_DEFAULT_TIMEOUT
> The value can be overridden by the wdt_period command-line parameter.
>
> config MEN_A21_WDT
> - tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
> - select WATCHDOG_CORE
> - depends on GPIOLIB || COMPILE_TEST
> - help
> - Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
> + tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
> + select WATCHDOG_CORE
> + depends on GPIOLIB || COMPILE_TEST
> + help
> + Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
>
> - The driver can also be built as a module. If so, the module will be
> - called mena21_wdt.
> + The driver can also be built as a module. If so, the module will be
> + called mena21_wdt.
>
> - If unsure select N here.
> + If unsure select N here.
>
> # PPC64 Architecture
>
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index caa9f4a..0c3d35e 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -163,6 +163,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
> obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
> octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
> obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
> +obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
> obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
> obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
> obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
> diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
> index 4dddd82..c32c45b 100644
> --- a/drivers/watchdog/bcm2835_wdt.c
> +++ b/drivers/watchdog/bcm2835_wdt.c
> @@ -55,6 +55,15 @@ struct bcm2835_wdt {
> static unsigned int heartbeat;
> static bool nowayout = WATCHDOG_NOWAYOUT;
>
> +static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
> +{
> + uint32_t cur;
> +
> + cur = readl(wdt->base + PM_RSTC);
> +
> + return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
> +}
> +
> static int bcm2835_wdt_start(struct watchdog_device *wdog)
> {
> struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
> @@ -181,6 +190,17 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
> watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
> watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
> bcm2835_wdt_wdd.parent = &pdev->dev;
> + if (bcm2835_wdt_is_running(wdt)) {
> + /*
> + * The currently active timeout value (set by the
> + * bootloader) may be different from the module
> + * heartbeat parameter or the value in device
> + * tree. But we just need to set WDOG_HW_RUNNING,
> + * because then the framework will "immediately" ping
> + * the device, updating the timeout.
> + */
> + set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status);
> + }
> err = watchdog_register_device(&bcm2835_wdt_wdd);
> if (err) {
> dev_err(dev, "Failed to register watchdog device");
> diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
> index e238df4..4814c00 100644
> --- a/drivers/watchdog/bcm7038_wdt.c
> +++ b/drivers/watchdog/bcm7038_wdt.c
> @@ -216,6 +216,7 @@ static const struct of_device_id bcm7038_wdt_match[] = {
> { .compatible = "brcm,bcm7038-wdt" },
> {},
> };
> +MODULE_DEVICE_TABLE(of, bcm7038_wdt_match);
>
> static struct platform_driver bcm7038_wdt_driver = {
> .probe = bcm7038_wdt_probe,
> diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
> index 71ee079..3d43775 100644
> --- a/drivers/watchdog/cpwd.c
> +++ b/drivers/watchdog/cpwd.c
> @@ -538,12 +538,9 @@ static int cpwd_probe(struct platform_device *op)
> if (cpwd_device)
> return -EINVAL;
>
> - p = kzalloc(sizeof(*p), GFP_KERNEL);
> - err = -ENOMEM;
> - if (!p) {
> - pr_err("Unable to allocate struct cpwd\n");
> - goto out;
> - }
> + p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL);
> + if (!p)
> + return -ENOMEM;
>
> p->irq = op->archdata.irqs[0];
>
> @@ -553,12 +550,12 @@ static int cpwd_probe(struct platform_device *op)
> 4 * WD_TIMER_REGSZ, DRIVER_NAME);
> if (!p->regs) {
> pr_err("Unable to map registers\n");
> - goto out_free;
> + return -ENOMEM;
> }
>
> options = of_find_node_by_path("/options");
> - err = -ENODEV;
> if (!options) {
> + err = -ENODEV;
> pr_err("Unable to find /options node\n");
> goto out_iounmap;
> }
> @@ -620,10 +617,7 @@ static int cpwd_probe(struct platform_device *op)
>
> platform_set_drvdata(op, p);
> cpwd_device = p;
> - err = 0;
> -
> -out:
> - return err;
> + return 0;
>
> out_unregister:
> for (i--; i >= 0; i--)
> @@ -632,9 +626,7 @@ out_unregister:
> out_iounmap:
> of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
>
> -out_free:
> - kfree(p);
> - goto out;
> + return err;
> }
>
> static int cpwd_remove(struct platform_device *op)
> @@ -659,7 +651,6 @@ static int cpwd_remove(struct platform_device *op)
> free_irq(p->irq, p);
>
> of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
> - kfree(p);
>
> cpwd_device = NULL;
>
> diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
> index 7386111..a02cee6 100644
> --- a/drivers/watchdog/da9062_wdt.c
> +++ b/drivers/watchdog/da9062_wdt.c
> @@ -1,5 +1,5 @@
> /*
> - * da9062_wdt.c - WDT device driver for DA9062
> + * Watchdog device driver for DA9062 and DA9061 PMICs
> * Copyright (C) 2015 Dialog Semiconductor Ltd.
> *
> * This program is free software; you can redistribute it and/or
> @@ -188,6 +188,13 @@ static const struct watchdog_ops da9062_watchdog_ops = {
> .set_timeout = da9062_wdt_set_timeout,
> };
>
> +static const struct of_device_id da9062_compatible_id_table[] = {
> + { .compatible = "dlg,da9062-watchdog", },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, da9062_compatible_id_table);
> +
> static int da9062_wdt_probe(struct platform_device *pdev)
> {
> int ret;
> @@ -244,11 +251,12 @@ static struct platform_driver da9062_wdt_driver = {
> .remove = da9062_wdt_remove,
> .driver = {
> .name = "da9062-watchdog",
> + .of_match_table = da9062_compatible_id_table,
> },
> };
> module_platform_driver(da9062_wdt_driver);
>
> MODULE_AUTHOR("S Twiss <[email protected]>");
> -MODULE_DESCRIPTION("WDT device driver for Dialog DA9062");
> +MODULE_DESCRIPTION("WDT device driver for Dialog DA9062 and DA9061");
> MODULE_LICENSE("GPL");
> MODULE_ALIAS("platform:da9062-watchdog");
> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
> index 17454ca..0e731d7 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -166,8 +166,12 @@ static int davinci_wdt_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> davinci_wdt->clk = devm_clk_get(dev, NULL);
> - if (WARN_ON(IS_ERR(davinci_wdt->clk)))
> +
> + if (IS_ERR(davinci_wdt->clk)) {
> + if (PTR_ERR(davinci_wdt->clk) != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "failed to get clock node\n");
> return PTR_ERR(davinci_wdt->clk);
> + }
>
> clk_prepare_enable(davinci_wdt->clk);
>
> diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
> index db36d12..a4b7292 100644
> --- a/drivers/watchdog/intel-mid_wdt.c
> +++ b/drivers/watchdog/intel-mid_wdt.c
> @@ -43,6 +43,7 @@ static inline int wdt_command(int sub, u32 *in, int inlen)
>
> static int wdt_start(struct watchdog_device *wd)
> {
> + struct device *dev = watchdog_get_drvdata(wd);
> int ret, in_size;
> int timeout = wd->timeout;
> struct ipc_wd_start {
> @@ -57,36 +58,32 @@ static int wdt_start(struct watchdog_device *wd)
> in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4);
>
> ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size);
> - if (ret) {
> - struct device *dev = watchdog_get_drvdata(wd);
> + if (ret)
> dev_crit(dev, "error starting watchdog: %d\n", ret);
> - }
>
> return ret;
> }
>
> static int wdt_ping(struct watchdog_device *wd)
> {
> + struct device *dev = watchdog_get_drvdata(wd);
> int ret;
>
> ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0);
> - if (ret) {
> - struct device *dev = watchdog_get_drvdata(wd);
> - dev_crit(dev, "Error executing keepalive: 0x%x\n", ret);
> - }
> + if (ret)
> + dev_crit(dev, "Error executing keepalive: %d\n", ret);
>
> return ret;
> }
>
> static int wdt_stop(struct watchdog_device *wd)
> {
> + struct device *dev = watchdog_get_drvdata(wd);
> int ret;
>
> ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0);
> - if (ret) {
> - struct device *dev = watchdog_get_drvdata(wd);
> - dev_crit(dev, "Error stopping watchdog: 0x%x\n", ret);
> - }
> + if (ret)
> + dev_crit(dev, "Error stopping watchdog: %d\n", ret);
>
> return ret;
> }
> @@ -151,6 +148,9 @@ static int mid_wdt_probe(struct platform_device *pdev)
> return ret;
> }
>
> + /* Make sure the watchdog is not running */
> + wdt_stop(wdt_dev);
> +
> ret = watchdog_register_device(wdt_dev);
> if (ret) {
> dev_err(&pdev->dev, "error registering watchdog device\n");
> diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
> index e54839b..b9878c4 100644
> --- a/drivers/watchdog/it87_wdt.c
> +++ b/drivers/watchdog/it87_wdt.c
> @@ -12,7 +12,7 @@
> * http://www.ite.com.tw/
> *
> * Support of the watchdog timers, which are available on
> - * IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726,
> + * IT8620, IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726,
> * IT8728 and IT8783.
> *
> * This program is free software; you can redistribute it and/or
> @@ -78,6 +78,7 @@
>
> /* Chip Id numbers */
> #define NO_DEV_ID 0xffff
> +#define IT8620_ID 0x8620
> #define IT8702_ID 0x8702
> #define IT8705_ID 0x8705
> #define IT8712_ID 0x8712
> @@ -630,6 +631,7 @@ static int __init it87_wdt_init(void)
> case IT8726_ID:
> max_units = 65535;
> break;
> + case IT8620_ID:
> case IT8718_ID:
> case IT8720_ID:
> case IT8721_ID:
> diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
> index c8d51dd..20627f2 100644
> --- a/drivers/watchdog/jz4740_wdt.c
> +++ b/drivers/watchdog/jz4740_wdt.c
> @@ -148,7 +148,7 @@ static const struct of_device_id jz4740_wdt_of_matches[] = {
> { .compatible = "ingenic,jz4740-watchdog", },
> { /* sentinel */ }
> };
> -MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches)
> +MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches);
> #endif
>
> static int jz4740_wdt_probe(struct platform_device *pdev)
> diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> new file mode 100644
> index 0000000..3aee50c
> --- /dev/null
> +++ b/drivers/watchdog/loongson1_wdt.c
> @@ -0,0 +1,170 @@
> +/*
> + * Copyright (c) 2016 Yang Ling <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +#include <loongson1.h>
> +
> +#define DEFAULT_HEARTBEAT 30
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0444);
> +
> +static unsigned int heartbeat;
> +module_param(heartbeat, uint, 0444);
> +
> +struct ls1x_wdt_drvdata {
> + void __iomem *base;
> + struct clk *clk;
> + unsigned long clk_rate;
> + struct watchdog_device wdt;
> +};
> +
> +static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_SET);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
> + unsigned int timeout)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> + unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000;
> + unsigned int counts;
> +
> + wdt_dev->timeout = timeout;
> +
> + counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat);
> + writel(counts, drvdata->base + WDT_TIMER);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x1, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +
> + writel(0x0, drvdata->base + WDT_EN);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info ls1x_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "Loongson1 Watchdog",
> +};
> +
> +static const struct watchdog_ops ls1x_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = ls1x_wdt_start,
> + .stop = ls1x_wdt_stop,
> + .ping = ls1x_wdt_ping,
> + .set_timeout = ls1x_wdt_set_timeout,
> +};
> +
> +static int ls1x_wdt_probe(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata;
> + struct watchdog_device *ls1x_wdt;
> + unsigned long clk_rate;
> + struct resource *res;
> + int err;
> +
> + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drvdata->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drvdata->base))
> + return PTR_ERR(drvdata->base);
> +
> + drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
> + if (IS_ERR(drvdata->clk))
> + return PTR_ERR(drvdata->clk);
> +
> + err = clk_prepare_enable(drvdata->clk);
> + if (err) {
> + dev_err(&pdev->dev, "clk enable failed\n");
> + return err;
> + }
> +
> + clk_rate = clk_get_rate(drvdata->clk);
> + if (!clk_rate) {
> + err = -EINVAL;
> + goto err0;
> + }
> + drvdata->clk_rate = clk_rate;
> +
> + ls1x_wdt = &drvdata->wdt;
> + ls1x_wdt->info = &ls1x_wdt_info;
> + ls1x_wdt->ops = &ls1x_wdt_ops;
> + ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
> + ls1x_wdt->min_timeout = 1;
> + ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000;
> + ls1x_wdt->parent = &pdev->dev;
> +
> + watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
> + watchdog_set_nowayout(ls1x_wdt, nowayout);
> + watchdog_set_drvdata(ls1x_wdt, drvdata);
> +
> + err = watchdog_register_device(&drvdata->wdt);
> + if (err) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + goto err0;
> + }
> +
> + platform_set_drvdata(pdev, drvdata);
> +
> + dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
> +
> + return 0;
> +err0:
> + clk_disable_unprepare(drvdata->clk);
> + return err;
> +}
> +
> +static int ls1x_wdt_remove(struct platform_device *pdev)
> +{
> + struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&drvdata->wdt);
> + clk_disable_unprepare(drvdata->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver ls1x_wdt_driver = {
> + .probe = ls1x_wdt_probe,
> + .remove = ls1x_wdt_remove,
> + .driver = {
> + .name = "ls1x-wdt",
> + },
> +};
> +
> +module_platform_driver(ls1x_wdt_driver);
> +
> +MODULE_AUTHOR("Yang Ling <[email protected]>");
> +MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/watchdog/max77620_wdt.c b/drivers/watchdog/max77620_wdt.c
> index 48b84df..68c41fa 100644
> --- a/drivers/watchdog/max77620_wdt.c
> +++ b/drivers/watchdog/max77620_wdt.c
> @@ -205,6 +205,7 @@ static struct platform_device_id max77620_wdt_devtype[] = {
> { .name = "max77620-watchdog", },
> { },
> };
> +MODULE_DEVICE_TABLE(platform, max77620_wdt_devtype);
>
> static struct platform_driver max77620_wdt_driver = {
> .driver = {
> diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
> index 630bd18..2a9d5cd 100644
> --- a/drivers/watchdog/mei_wdt.c
> +++ b/drivers/watchdog/mei_wdt.c
> @@ -389,6 +389,8 @@ static int mei_wdt_register(struct mei_wdt *wdt)
> wdt->wdd.max_timeout = MEI_WDT_MAX_TIMEOUT;
>
> watchdog_set_drvdata(&wdt->wdd, wdt);
> + watchdog_stop_on_reboot(&wdt->wdd);
> +
> ret = watchdog_register_device(&wdt->wdd);
> if (ret) {
> dev_err(dev, "unable to register watchdog device = %d.\n", ret);
> diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
> index 44d180a..45d4766 100644
> --- a/drivers/watchdog/meson_gxbb_wdt.c
> +++ b/drivers/watchdog/meson_gxbb_wdt.c
> @@ -264,7 +264,6 @@ static struct platform_driver meson_gxbb_wdt_driver = {
>
> module_platform_driver(meson_gxbb_wdt_driver);
>
> -MODULE_ALIAS("platform:meson-gxbb-wdt");
> MODULE_AUTHOR("Neil Armstrong <[email protected]>");
> MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver");
> MODULE_LICENSE("Dual BSD/GPL");
> diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
> index 5f2273a..366e5c7 100644
> --- a/drivers/watchdog/mpc8xxx_wdt.c
> +++ b/drivers/watchdog/mpc8xxx_wdt.c
> @@ -23,7 +23,6 @@
> #include <linux/init.h>
> #include <linux/kernel.h>
> #include <linux/timer.h>
> -#include <linux/miscdevice.h>
> #include <linux/of_address.h>
> #include <linux/of_platform.h>
> #include <linux/module.h>
> diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
> index b55981f..8b4fa4d 100644
> --- a/drivers/watchdog/octeon-wdt-main.c
> +++ b/drivers/watchdog/octeon-wdt-main.c
> @@ -56,7 +56,6 @@
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> -#include <linux/miscdevice.h>
> #include <linux/interrupt.h>
> #include <linux/watchdog.h>
> #include <linux/cpumask.h>
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index 5796b5d..4f47b5e 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -209,7 +209,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
> wdt->wdd.parent = &pdev->dev;
> wdt->layout = regs;
>
> - if (readl(wdt->base + WDT_STS) & 1)
> + if (readl(wdt_addr(wdt, WDT_STS)) & 1)
> wdt->wdd.bootstatus = WDIOF_CARDRESET;
>
> /*
>