bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Tue
Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
Series Adapter Firmware").
bna was updated to use the newer firmware on Thu, 19 Feb 2015 16:02:32
-0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version")
bfa was not updated. I presume this was an oversight but it broke support
for bfa+bna cards such as the following
04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.2 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.3 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
Currently, if the bfa module is loaded first, bna fails to probe the
respective devices with
[ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144
[ 215.060656] bna 0000:04:00.2: initialization failed err=1
[ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144
[ 215.090644] bna 0000:04:00.3: initialization failed err=1
Whereas if bna is loaded first, bfa fails with
[ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version
[ 249.833513] bfa 0000:04:00.0: bfa init failed
[ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0
[ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version
[ 250.045449] bfa 0000:04:00.1: bfa init failed
[ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0
Increase bfa's requested firmware version.
I only tested that all of the devices probe without error.
Cc: Rasesh Mody <[email protected]>
Reported-by: Tim Ehlers <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
---
drivers/scsi/bfa/bfad.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 9d253cb..e70410b 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
-#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin"
+#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin"
static u32 *bfad_load_fwimg(struct pci_dev *pdev);
static void bfad_free_fwimg(void);
--
2.10.2
> From: Benjamin Poirier [mailto:[email protected]] On Behalf Of
> Benjamin Poirier
> Sent: Friday, December 23, 2016 2:01 PM
>
> bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Tue
> Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
> Series Adapter Firmware").
>
> bna was updated to use the newer firmware on Thu, 19 Feb 2015 16:02:32
> -0500 in 3f307c3d70 ("bna: Update the Driver and Firmware Version")
>
> bfa was not updated. I presume this was an oversight but it broke support
> for bfa+bna cards such as the following
> 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
> 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
> 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
> 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
> 04:00.2 Ethernet controller [0200]: Brocade Communications
> Systems,
> Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
> 04:00.3 Ethernet controller [0200]: Brocade Communications
> Systems,
> Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
>
> Currently, if the bfa module is loaded first, bna fails to probe the respective
> devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver -
> version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to
> ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization
> failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to
> ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization
> failed err=1
>
> Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series
> BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0:
> Running firmware version is incompatible with the driver version [
> 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic
> BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [
> 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with
> the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962]
> scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver:
> 3.2.25.0
>
> Increase bfa's requested firmware version.
> I only tested that all of the devices probe without error.
>
> Cc: Rasesh Mody <[email protected]>
> Reported-by: Tim Ehlers <[email protected]>
> Signed-off-by: Benjamin Poirier <[email protected]>
Acked-by: Rasesh Mody <[email protected]>
Thanks! We also need to bump up the BFA driver version to 3.2.25.1.
> ---
> drivers/scsi/bfa/bfad.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c index
> 9d253cb..e70410b 100644
> --- a/drivers/scsi/bfa/bfad.c
> +++ b/drivers/scsi/bfa/bfad.c
> @@ -64,9 +64,9 @@ int max_rport_logins =
> BFA_FCS_MAX_RPORT_LOGINS;
> u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
> u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
>
> -#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin"
> -#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin"
> -#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin"
> +#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin"
> +#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin"
> +#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin"
>
> static u32 *bfad_load_fwimg(struct pci_dev *pdev); static void
> bfad_free_fwimg(void);
> --
> 2.10.2
bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on
Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR
Series Adapter Firmware").
bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in
3f307c3d70 ("bna: Update the Driver and Firmware Version")
bfa was not updated. I presume this was an oversight but it broke support
for bfa+bna cards such as the following
04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc.
1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.2 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
04:00.3 Ethernet controller [0200]: Brocade Communications Systems,
Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01)
Currently, if the bfa module is loaded first, bna fails to probe the
respective devices with
[ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144
[ 215.060656] bna 0000:04:00.2: initialization failed err=1
[ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144
[ 215.090644] bna 0000:04:00.3: initialization failed err=1
Whereas if bna is loaded first, bfa fails with
[ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
[ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version
[ 249.833513] bfa 0000:04:00.0: bfa init failed
[ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0
[ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version
[ 250.045449] bfa 0000:04:00.1: bfa init failed
[ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0
Increase bfa's requested firmware version. Also increase the driver
version.
I only tested that all of the devices probe without error.
Reported-by: Tim Ehlers <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
Acked-by: Rasesh Mody <[email protected]>
---
drivers/scsi/bfa/bfad.c | 6 +++---
drivers/scsi/bfa/bfad_drv.h | 2 +-
2 files changed, 4 insertions(+), 4 deletions(-)
Changes v1-v2:
Also increase the driver version
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 9d253cb..e70410b 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -64,9 +64,9 @@ int max_rport_logins = BFA_FCS_MAX_RPORT_LOGINS;
u32 bfi_image_cb_size, bfi_image_ct_size, bfi_image_ct2_size;
u32 *bfi_image_cb, *bfi_image_ct, *bfi_image_ct2;
-#define BFAD_FW_FILE_CB "cbfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT "ctfw-3.2.3.0.bin"
-#define BFAD_FW_FILE_CT2 "ct2fw-3.2.3.0.bin"
+#define BFAD_FW_FILE_CB "cbfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT "ctfw-3.2.5.1.bin"
+#define BFAD_FW_FILE_CT2 "ct2fw-3.2.5.1.bin"
static u32 *bfad_load_fwimg(struct pci_dev *pdev);
static void bfad_free_fwimg(void);
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index f9e8620..cfcfff4 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -58,7 +58,7 @@
#ifdef BFA_DRIVER_VERSION
#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
#else
-#define BFAD_DRIVER_VERSION "3.2.25.0"
+#define BFAD_DRIVER_VERSION "3.2.25.1"
#endif
#define BFAD_PROTO_NAME FCPI_NAME
--
2.10.2