The video processing pipeline on the second output on the GE B850v3:
Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
Each bridge has a dedicated flash containing firmware for supporting the
custom design. The result is that in this design neither the STDP4028
nor the STDP2690 behave as the stock bridges would. The compatible
strings include the suffix "-ge-b850v3-fw" to make it clear that the
driver is for the bridges with the firmware which is specific for the GE
B850v3.
The driver is powerless to control the video processing pipeline, as the
two bridges behaves as a single one. The driver is only needed for
telling the host about EDID / HPD, and for giving the host powers to ack
interrupts.
Changes from V2:
- Added Acked-by: Rob Herring <[email protected]> on patch 1/4
- Fixed the driver to allow it to be compiled as a module
Changes from V1:
- Fix bindings documentation
- Fix white space issues on the driver
- Improved ge_b850v3_lvds_remove() to not rely on ge_b850v3_lvds_ptr->edid
Changes from V7(was GE B850v3 LVDS/DP++ Bridge):
- New devicetree binding with one node per bridge, and two ports per bridge
- Two i2c_devices, one per bridge
- Removed uneeded mutexes
- Moved documentation to bindings/display/bridge
- Included test for EDID extension blocks
- Renamed bridge pointer to ge_b850v3_lvds_ptr
- Removed the call to drm_helper_hpd_irq_event()
- Removed assignments to bridge.driver_private
Changes from V6:
- Removed check for pixel clock as the bridge supports up to 330Mhz while the
host is limited to 264 MHz in very specific conditions.
- Added a second mutex to avoid concurrency issues while acking interrupts
from threaded interrupt handlers.
- Renamed the edid mutex to be more descriptive.
- Added a .detach() function that disables the interrupts.
- Adopted i2c_new_secondary_device() and updated the dts and documentation to
match the new method.
- Removed useless test to drm_bridge_add()
- Did some refactoring around devm_request_threaded_irq()
- Added a missing call to i2c_unregister_device() on the i2c_driver.remove()
function.
Changes from V5:
- Change to MAINTAINERS in a separate patch
- Reworked interrupt handler initialization
- Removed useless calls to: drm_connector_register(),
drm_helper_hpd_irq_event(), and drm_bridge_enable()
Changes from V4:
- Renamed the i2c_driver.name from "ge,b850v3-lvds-dp" to "b850v3-lvds-dp" to
remove the comma from the driver name
Changes from V3:
- Removed the patch that was configuring the mapping between IPUs and external
displays on the dts file
Peter Senna Tschudin (4):
dt-bindings: display: megachips-stdpxxxx-ge-b850v3-fw
MAINTAINERS: Add entry for megachips-stdpxxxx-ge-b850v3-fw
drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)
dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges
(LVDS-DP++)
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 94 +++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
MAINTAINERS | 8 +
arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
.../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 428 +++++++++++++++++++++
7 files changed, 611 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
create mode 100644 drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
--
2.9.3
Devicetree binding documentation for the second video output
of the GE B850v3:
STDP4028-ge-b850v3-fw bridges (LVDS-DP)
STDP2690-ge-b850v3-fw bridges (DP-DP++)
Added entry for MegaChips at:
Documentation/devicetree/bindings/vendor-prefixes.txt
Cc: Laurent Pinchart <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Fabio Estevam <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
Changes from V3:
Added Acked-by: Rob Herring <[email protected]>
Changes from V1:
- New subject
- Moved binding documentation from bindings/video/ to bindings/display/bridge/
- Reworded to describe hardware instead of the driver
- Reformated the bindings to have one set of required properties per device
- Updated reg description
- Defined number of ports and what they are for
.../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 94 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
2 files changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
new file mode 100644
index 0000000..7baa658
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -0,0 +1,94 @@
+Drivers for the second video output of the GE B850v3:
+ STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+ STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+The video processing pipeline on the second output on the GE B850v3:
+
+ Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+Each bridge has a dedicated flash containing firmware for supporting the custom
+design. The result is that, in this design, neither the STDP4028 nor the
+STDP2690 behave as the stock bridges would. The compatible strings include the
+suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+the firmware specific for the GE B850v3.
+
+The hardware do not provide control over the video processing pipeline, as the
+two bridges behaves as a single one. The only interfaces exposed by the
+hardware are EDID, HPD, and interrupts.
+
+stdp4028-ge-b850v3-fw required properties:
+ - compatible : "megachips,stdp4028-ge-b850v3-fw"
+ - reg : I2C bus address
+ - interrupt-parent : phandle of the interrupt controller that services
+ interrupts to the device
+ - interrupts : one interrupt should be described here, as in
+ <0 IRQ_TYPE_LEVEL_HIGH>
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+stdp2690-ge-b850v3-fw required properties:
+ compatible : "megachips,stdp2690-ge-b850v3-fw"
+ - reg : I2C bus address
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+Example:
+
+&mux2_i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ec0bfb9..4686f4b 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -178,6 +178,7 @@ maxim Maxim Integrated Products
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.
+megachips MegaChips
melexis Melexis N.V.
melfas MELFAS Inc.
memsic MEMSIC Inc.
--
2.9.3
The video processing pipeline on the second output on the GE B850v3:
Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
Each bridge has a dedicated flash containing firmware for supporting the
custom design. The result is that in this design neither the STDP4028
nor the STDP2690 behave as the stock bridges would. The compatible
strings include the suffix "-ge-b850v3-fw" to make it clear that the
driver is for the bridges with the firmware which is specific for the GE
B850v3.
The driver is powerless to control the video processing pipeline, as the
two bridges behaves as a single one. The driver is only needed for
telling the host about EDID / HPD, and for giving the host powers to ack
interrupts.
This driver adds one i2c_device for each bridge, but only one
drm_bridge. This design allows the creation of a functional connector
that is capable of reading EDID from the STDP2690 while handling
interrupts on the STDP4028.
Cc: Laurent Pinchart <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Enric Balletbo <[email protected]>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
Changes from V2:
- Fix the code to allow it be compiled as a module
Changes from V1:
- Updated copyright year
- Fixed blank line issues
- Updated ge_b850v3_lvds_remove() to not rely on ge_b850v3_lvds_ptr->edid and
added a comment to explain the test.
- Fixed checkpatch strict warnings about continuation lines. In one case
fixing the warning would cause the continuation line to be over 80 chars and
that strict warning remains.
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
.../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 428 +++++++++++++++++++++
3 files changed, 440 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index eb8688e..4a937f1 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -48,6 +48,17 @@ config DRM_DW_HDMI_I2S_AUDIO
Support the I2S Audio interface which is part of the Synopsis
Designware HDMI block.
+config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
+ tristate "MegaChips stdp4028-ge-b850v3-fw and stdp2690-ge-b850v3-fw"
+ depends on OF
+ select DRM_KMS_HELPER
+ select DRM_PANEL
+ ---help---
+ This is a driver for the display bridges of
+ GE B850v3 that convert dual channel LVDS
+ to DP++. This is used with the i.MX6 imx-ldb
+ driver. You are likely to say N here.
+
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 2e83a785..af0b7cc 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
+obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
new file mode 100644
index 0000000..e53c243
--- /dev/null
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -0,0 +1,428 @@
+/*
+ * Driver for MegaChips STDP4028 with GE B850v3 firmware (LVDS-DP)
+ * Driver for MegaChips STDP2690 with GE B850v3 firmware (DP-DP++)
+
+ * Copyright (c) 2017, Collabora Ltd.
+ * Copyright (c) 2017, General Electric Company
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+ * This driver creates a drm_bridge and a drm_connector for the LVDS to DP++
+ * display bridge of the GE B850v3. There are two physical bridges on the video
+ * signal pipeline: a STDP4028(LVDS to DP) and a STDP2690(DP to DP++). The
+ * physical bridges are automatically configured by the input video signal, and
+ * the driver has no access to the video processing pipeline. The driver is
+ * only needed to read EDID from the STDP2690 and to handle HPD events from the
+ * STDP4028. The driver communicates with both bridges over i2c. The video
+ * signal pipeline is as follows:
+ *
+ * Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drmP.h>
+
+#define EDID_EXT_BLOCK_CNT 0x7E
+
+#define STDP4028_IRQ_OUT_CONF_REG 0x02
+#define STDP4028_DPTX_IRQ_EN_REG 0x3C
+#define STDP4028_DPTX_IRQ_STS_REG 0x3D
+#define STDP4028_DPTX_STS_REG 0x3E
+
+#define STDP4028_DPTX_DP_IRQ_EN 0x1000
+
+#define STDP4028_DPTX_HOTPLUG_IRQ_EN 0x0400
+#define STDP4028_DPTX_LINK_CH_IRQ_EN 0x2000
+#define STDP4028_DPTX_IRQ_CONFIG \
+ (STDP4028_DPTX_LINK_CH_IRQ_EN | STDP4028_DPTX_HOTPLUG_IRQ_EN)
+
+#define STDP4028_DPTX_HOTPLUG_STS 0x0200
+#define STDP4028_DPTX_LINK_STS 0x1000
+#define STDP4028_CON_STATE_CONNECTED \
+ (STDP4028_DPTX_HOTPLUG_STS | STDP4028_DPTX_LINK_STS)
+
+#define STDP4028_DPTX_HOTPLUG_CH_STS 0x0400
+#define STDP4028_DPTX_LINK_CH_STS 0x2000
+#define STDP4028_DPTX_IRQ_CLEAR \
+ (STDP4028_DPTX_LINK_CH_STS | STDP4028_DPTX_HOTPLUG_CH_STS)
+
+static DEFINE_MUTEX(ge_b850v3_lvds_dev_mutex);
+
+struct ge_b850v3_lvds {
+ struct drm_connector connector;
+ struct drm_bridge bridge;
+ struct i2c_client *stdp4028_i2c;
+ struct i2c_client *stdp2690_i2c;
+ struct edid *edid;
+};
+
+static struct ge_b850v3_lvds *ge_b850v3_lvds_ptr;
+
+u8 *stdp2690_get_edid(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ unsigned char start = 0x00;
+ unsigned int total_size;
+ u8 *block = kmalloc(EDID_LENGTH, GFP_KERNEL);
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ .buf = block,
+ }
+ };
+
+ if (!block)
+ return NULL;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID.\n");
+ goto err;
+ }
+
+ if (!drm_edid_block_valid(block, 0, false, NULL)) {
+ DRM_ERROR("Invalid EDID data\n");
+ goto err;
+ }
+
+ total_size = (block[EDID_EXT_BLOCK_CNT] + 1) * EDID_LENGTH;
+ if (total_size > EDID_LENGTH) {
+ kfree(block);
+ block = kmalloc(total_size, GFP_KERNEL);
+ if (!block)
+ return NULL;
+
+ /* Yes, read the entire buffer, and do not skip the first
+ * EDID_LENGTH bytes.
+ */
+ start = 0x00;
+ msgs[1].len = total_size;
+ msgs[1].buf = block;
+
+ if (i2c_transfer(adapter, msgs, 2) != 2) {
+ DRM_ERROR("Unable to read EDID extension blocks.\n");
+ goto err;
+ }
+ if (!drm_edid_block_valid(block, 1, false, NULL)) {
+ DRM_ERROR("Invalid EDID data\n");
+ goto err;
+ }
+ }
+
+ return block;
+
+err:
+ kfree(block);
+ return NULL;
+}
+
+static int ge_b850v3_lvds_get_modes(struct drm_connector *connector)
+{
+ struct i2c_client *client;
+ int num_modes = 0;
+
+ client = ge_b850v3_lvds_ptr->stdp2690_i2c;
+
+ kfree(ge_b850v3_lvds_ptr->edid);
+ ge_b850v3_lvds_ptr->edid = (struct edid *)stdp2690_get_edid(client);
+
+ if (ge_b850v3_lvds_ptr->edid) {
+ drm_mode_connector_update_edid_property(connector,
+ ge_b850v3_lvds_ptr->edid);
+ num_modes = drm_add_edid_modes(connector,
+ ge_b850v3_lvds_ptr->edid);
+ }
+
+ return num_modes;
+}
+
+static enum drm_mode_status ge_b850v3_lvds_mode_valid(
+ struct drm_connector *connector, struct drm_display_mode *mode)
+{
+ return MODE_OK;
+}
+
+static const struct
+drm_connector_helper_funcs ge_b850v3_lvds_connector_helper_funcs = {
+ .get_modes = ge_b850v3_lvds_get_modes,
+ .mode_valid = ge_b850v3_lvds_mode_valid,
+};
+
+static enum drm_connector_status ge_b850v3_lvds_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct i2c_client *stdp4028_i2c =
+ ge_b850v3_lvds_ptr->stdp4028_i2c;
+ s32 link_state;
+
+ link_state = i2c_smbus_read_word_data(stdp4028_i2c,
+ STDP4028_DPTX_STS_REG);
+
+ if (link_state == STDP4028_CON_STATE_CONNECTED)
+ return connector_status_connected;
+
+ if (link_state == 0)
+ return connector_status_disconnected;
+
+ return connector_status_unknown;
+}
+
+static const struct drm_connector_funcs ge_b850v3_lvds_connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = ge_b850v3_lvds_detect,
+ .destroy = drm_connector_cleanup,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static irqreturn_t ge_b850v3_lvds_irq_handler(int irq, void *dev_id)
+{
+ struct i2c_client *stdp4028_i2c
+ = ge_b850v3_lvds_ptr->stdp4028_i2c;
+
+ i2c_smbus_write_word_data(stdp4028_i2c,
+ STDP4028_DPTX_IRQ_STS_REG,
+ STDP4028_DPTX_IRQ_CLEAR);
+
+ if (ge_b850v3_lvds_ptr->connector.dev)
+ drm_kms_helper_hotplug_event(ge_b850v3_lvds_ptr->connector.dev);
+
+ return IRQ_HANDLED;
+}
+
+static int ge_b850v3_lvds_attach(struct drm_bridge *bridge)
+{
+ struct drm_connector *connector = &ge_b850v3_lvds_ptr->connector;
+ struct i2c_client *stdp4028_i2c
+ = ge_b850v3_lvds_ptr->stdp4028_i2c;
+ int ret;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_helper_add(connector,
+ &ge_b850v3_lvds_connector_helper_funcs);
+
+ ret = drm_connector_init(bridge->dev, connector,
+ &ge_b850v3_lvds_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ if (ret) {
+ DRM_ERROR("Failed to initialize connector with drm\n");
+ return ret;
+ }
+
+ ret = drm_mode_connector_attach_encoder(connector, bridge->encoder);
+ if (ret)
+ return ret;
+
+ /* Configures the bridge to re-enable interrupts after each ack. */
+ i2c_smbus_write_word_data(stdp4028_i2c,
+ STDP4028_IRQ_OUT_CONF_REG,
+ STDP4028_DPTX_DP_IRQ_EN);
+
+ /* Enable interrupts */
+ i2c_smbus_write_word_data(stdp4028_i2c,
+ STDP4028_DPTX_IRQ_EN_REG,
+ STDP4028_DPTX_IRQ_CONFIG);
+
+ return 0;
+}
+
+static const struct drm_bridge_funcs ge_b850v3_lvds_funcs = {
+ .attach = ge_b850v3_lvds_attach,
+};
+
+static int ge_b850v3_lvds_init(struct device *dev)
+{
+ mutex_lock(&ge_b850v3_lvds_dev_mutex);
+
+ if (ge_b850v3_lvds_ptr)
+ goto success;
+
+ ge_b850v3_lvds_ptr = devm_kzalloc(dev,
+ sizeof(*ge_b850v3_lvds_ptr),
+ GFP_KERNEL);
+
+ if (!ge_b850v3_lvds_ptr) {
+ mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+ return -ENOMEM;
+ }
+
+ ge_b850v3_lvds_ptr->bridge.funcs = &ge_b850v3_lvds_funcs;
+ ge_b850v3_lvds_ptr->bridge.of_node = dev->of_node;
+ drm_bridge_add(&ge_b850v3_lvds_ptr->bridge);
+
+success:
+ mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+ return 0;
+}
+
+static void ge_b850v3_lvds_remove(void)
+{
+ mutex_lock(&ge_b850v3_lvds_dev_mutex);
+ /*
+ * This check is to avoid both the drivers
+ * removing the bridge in their remove() function
+ */
+ if (!ge_b850v3_lvds_ptr)
+ goto out;
+
+ drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge);
+
+ kfree(ge_b850v3_lvds_ptr->edid);
+
+ ge_b850v3_lvds_ptr = NULL;
+out:
+ mutex_unlock(&ge_b850v3_lvds_dev_mutex);
+}
+
+static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &stdp4028_i2c->dev;
+
+ ge_b850v3_lvds_init(dev);
+
+ ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
+ i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
+
+ /* Clear pending interrupts since power up. */
+ i2c_smbus_write_word_data(stdp4028_i2c,
+ STDP4028_DPTX_IRQ_STS_REG,
+ STDP4028_DPTX_IRQ_CLEAR);
+
+ if (!stdp4028_i2c->irq)
+ return 0;
+
+ return devm_request_threaded_irq(&stdp4028_i2c->dev,
+ stdp4028_i2c->irq, NULL,
+ ge_b850v3_lvds_irq_handler,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr);
+}
+
+static int stdp4028_ge_b850v3_fw_remove(struct i2c_client *stdp4028_i2c)
+{
+ ge_b850v3_lvds_remove();
+
+ return 0;
+}
+
+static const struct i2c_device_id stdp4028_ge_b850v3_fw_i2c_table[] = {
+ {"stdp4028_ge_fw", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, stdp4028_ge_b850v3_fw_i2c_table);
+
+static const struct of_device_id stdp4028_ge_b850v3_fw_match[] = {
+ { .compatible = "megachips,stdp4028-ge-b850v3-fw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stdp4028_ge_b850v3_fw_match);
+
+static struct i2c_driver stdp4028_ge_b850v3_fw_driver = {
+ .id_table = stdp4028_ge_b850v3_fw_i2c_table,
+ .probe = stdp4028_ge_b850v3_fw_probe,
+ .remove = stdp4028_ge_b850v3_fw_remove,
+ .driver = {
+ .name = "stdp4028-ge-b850v3-fw",
+ .of_match_table = stdp4028_ge_b850v3_fw_match,
+ },
+};
+
+static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &stdp2690_i2c->dev;
+
+ ge_b850v3_lvds_init(dev);
+
+ ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
+ i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
+
+ return 0;
+}
+
+static int stdp2690_ge_b850v3_fw_remove(struct i2c_client *stdp2690_i2c)
+{
+ ge_b850v3_lvds_remove();
+
+ return 0;
+}
+
+static const struct i2c_device_id stdp2690_ge_b850v3_fw_i2c_table[] = {
+ {"stdp2690_ge_fw", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, stdp2690_ge_b850v3_fw_i2c_table);
+
+static const struct of_device_id stdp2690_ge_b850v3_fw_match[] = {
+ { .compatible = "megachips,stdp2690-ge-b850v3-fw" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stdp2690_ge_b850v3_fw_match);
+
+static struct i2c_driver stdp2690_ge_b850v3_fw_driver = {
+ .id_table = stdp2690_ge_b850v3_fw_i2c_table,
+ .probe = stdp2690_ge_b850v3_fw_probe,
+ .remove = stdp2690_ge_b850v3_fw_remove,
+ .driver = {
+ .name = "stdp2690-ge-b850v3-fw",
+ .of_match_table = stdp2690_ge_b850v3_fw_match,
+ },
+};
+
+static int __init stdpxxxx_ge_b850v3_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&stdp4028_ge_b850v3_fw_driver);
+ if (ret)
+ return ret;
+
+ return i2c_add_driver(&stdp2690_ge_b850v3_fw_driver);
+}
+module_init(stdpxxxx_ge_b850v3_init);
+
+static void __exit stdpxxxx_ge_b850v3_exit(void)
+{
+ i2c_del_driver(&stdp2690_ge_b850v3_fw_driver);
+ i2c_del_driver(&stdp4028_ge_b850v3_fw_driver);
+}
+module_exit(stdpxxxx_ge_b850v3_exit);
+
+MODULE_AUTHOR("Peter Senna Tschudin <[email protected]>");
+MODULE_AUTHOR("Martyn Welch <[email protected]>");
+MODULE_DESCRIPTION("GE LVDS to DP++ display bridge)");
+MODULE_LICENSE("GPL v2");
--
2.9.3
Add MAINTAINERS entry for the second video output of the GE B850v3:
STDP4028-ge-b850v3-fw bridges (LVDS-DP)
STDP2690-ge-b850v3-fw bridges (DP-DP++)
Cc: Laurent Pinchart <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Fabio Estevam <[email protected]>
CC: David Airlie <[email protected]>
CC: Thierry Reding <[email protected]>
CC: Thierry Reding <[email protected]>
CC: Archit Taneja <[email protected]>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
Unchanged since V1
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index bc12716..d8c841a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8127,6 +8127,14 @@ L: [email protected]
S: Maintained
F: drivers/net/wireless/mediatek/mt7601u/
+MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES
+M: Peter Senna Tschudin <[email protected]>
+M: Martin Donnelly <[email protected]>
+M: Martyn Welch <[email protected]>
+S: Maintained
+F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+
MEGARAID SCSI/SAS DRIVERS
M: Kashyap Desai <[email protected]>
M: Sumit Saxena <[email protected]>
--
2.9.3
Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
B850v3 dts file.
Cc: Laurent Pinchart <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Fabio Estevam <[email protected]>
Signed-off-by: Peter Senna Tschudin <[email protected]>
---
Unchanged since V1.
arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index b237429..3ec54da 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -72,6 +72,13 @@
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
+
+ port@4 {
+ reg = <4>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&stdp4028_in>;
+ };
+ };
};
};
@@ -146,3 +153,64 @@
&usdhc2 {
status = "disabled";
};
+
+&mux2_i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+};
--
2.9.3
Hi,
On 3/3/2017 9:27 PM, Peter Senna Tschudin wrote:
> The video processing pipeline on the second output on the GE B850v3:
>
> Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
>
> Each bridge has a dedicated flash containing firmware for supporting the
> custom design. The result is that in this design neither the STDP4028
> nor the STDP2690 behave as the stock bridges would. The compatible
> strings include the suffix "-ge-b850v3-fw" to make it clear that the
> driver is for the bridges with the firmware which is specific for the GE
> B850v3.
>
> The driver is powerless to control the video processing pipeline, as the
> two bridges behaves as a single one. The driver is only needed for
> telling the host about EDID / HPD, and for giving the host powers to ack
> interrupts.
queued Patches 1,2 and 3 to drm-misc-next. Made stdp2690_get_edid static
in Patch #3 to fix a sparse warning.
Thanks,
Archit
>
> Changes from V2:
> - Added Acked-by: Rob Herring <[email protected]> on patch 1/4
> - Fixed the driver to allow it to be compiled as a module
>
> Changes from V1:
> - Fix bindings documentation
> - Fix white space issues on the driver
> - Improved ge_b850v3_lvds_remove() to not rely on ge_b850v3_lvds_ptr->edid
>
> Changes from V7(was GE B850v3 LVDS/DP++ Bridge):
> - New devicetree binding with one node per bridge, and two ports per bridge
> - Two i2c_devices, one per bridge
> - Removed uneeded mutexes
> - Moved documentation to bindings/display/bridge
> - Included test for EDID extension blocks
> - Renamed bridge pointer to ge_b850v3_lvds_ptr
> - Removed the call to drm_helper_hpd_irq_event()
> - Removed assignments to bridge.driver_private
>
> Changes from V6:
> - Removed check for pixel clock as the bridge supports up to 330Mhz while the
> host is limited to 264 MHz in very specific conditions.
> - Added a second mutex to avoid concurrency issues while acking interrupts
> from threaded interrupt handlers.
> - Renamed the edid mutex to be more descriptive.
> - Added a .detach() function that disables the interrupts.
> - Adopted i2c_new_secondary_device() and updated the dts and documentation to
> match the new method.
> - Removed useless test to drm_bridge_add()
> - Did some refactoring around devm_request_threaded_irq()
> - Added a missing call to i2c_unregister_device() on the i2c_driver.remove()
> function.
>
> Changes from V5:
> - Change to MAINTAINERS in a separate patch
> - Reworked interrupt handler initialization
> - Removed useless calls to: drm_connector_register(),
> drm_helper_hpd_irq_event(), and drm_bridge_enable()
>
> Changes from V4:
> - Renamed the i2c_driver.name from "ge,b850v3-lvds-dp" to "b850v3-lvds-dp" to
> remove the comma from the driver name
>
> Changes from V3:
> - Removed the patch that was configuring the mapping between IPUs and external
> displays on the dts file
>
> Peter Senna Tschudin (4):
> dt-bindings: display: megachips-stdpxxxx-ge-b850v3-fw
> MAINTAINERS: Add entry for megachips-stdpxxxx-ge-b850v3-fw
> drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)
> dts/imx6q-b850v3: Use megachips-stdpxxxx-ge-b850v3-fw bridges
> (LVDS-DP++)
>
> .../bridge/megachips-stdpxxxx-ge-b850v3-fw.txt | 94 +++++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> MAINTAINERS | 8 +
> arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++
> drivers/gpu/drm/bridge/Kconfig | 11 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> .../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 428 +++++++++++++++++++++
> 7 files changed, 611 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
> create mode 100644 drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
On Mon, Mar 06, 2017 at 03:27:16PM +0530, Archit Taneja wrote:
Hi Archit,
> Hi,
>
> On 3/3/2017 9:27 PM, Peter Senna Tschudin wrote:
> > The video processing pipeline on the second output on the GE B850v3:
> >
> > Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> >
> > Each bridge has a dedicated flash containing firmware for supporting the
> > custom design. The result is that in this design neither the STDP4028
> > nor the STDP2690 behave as the stock bridges would. The compatible
> > strings include the suffix "-ge-b850v3-fw" to make it clear that the
> > driver is for the bridges with the firmware which is specific for the GE
> > B850v3.
> >
> > The driver is powerless to control the video processing pipeline, as the
> > two bridges behaves as a single one. The driver is only needed for
> > telling the host about EDID / HPD, and for giving the host powers to ack
> > interrupts.
>
> queued Patches 1,2 and 3 to drm-misc-next. Made stdp2690_get_edid static
> in Patch #3 to fix a sparse warning.
What about 4/4, aka the dt change? Do I need an ack from Rob Herring?
Thanks a lot!
[...]
On Fri, Mar 03, 2017 at 04:57:10PM +0100, Peter Senna Tschudin wrote:
Hi Shawn Guo,
Now that the driver and binding are in, can you pick this up?
Thank you!
> Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
> B850v3 dts file.
>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Martyn Welch <[email protected]>
> Cc: Martin Donnelly <[email protected]>
> Cc: Javier Martinez Canillas <[email protected]>
> Cc: Enric Balletbo i Serra <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Fabio Estevam <[email protected]>
> Signed-off-by: Peter Senna Tschudin <[email protected]>
> ---
> Unchanged since V1.
>
> arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> index b237429..3ec54da 100644
> --- a/arch/arm/boot/dts/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -72,6 +72,13 @@
> fsl,data-mapping = "spwg";
> fsl,data-width = <24>;
> status = "okay";
> +
> + port@4 {
> + reg = <4>;
> + lvds0_out: endpoint {
> + remote-endpoint = <&stdp4028_in>;
> + };
> + };
> };
> };
>
> @@ -146,3 +153,64 @@
> &usdhc2 {
> status = "disabled";
> };
> +
> +&mux2_i2c2 {
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + stdp4028@73 {
> + compatible = "megachips,stdp4028-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x73>;
> +
> + interrupt-parent = <&gpio2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp4028_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + stdp4028_out: endpoint {
> + remote-endpoint = <&stdp2690_in>;
> + };
> + };
> + };
> + };
> +
> + stdp2690@72 {
> + compatible = "megachips,stdp2690-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x72>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp2690_in: endpoint {
> + remote-endpoint = <&stdp4028_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + stdp2690_out: endpoint {
> + /* Connector for external display */
> + };
> + };
> + };
> + };
> +};
> --
> 2.9.3
>
Am Mittwoch, den 08.03.2017, 10:42 +0100 schrieb Peter Senna Tschudin:
> On Mon, Mar 06, 2017 at 03:27:16PM +0530, Archit Taneja wrote:
> Hi Archit,
>
> > Hi,
> >
> > On 3/3/2017 9:27 PM, Peter Senna Tschudin wrote:
> > > The video processing pipeline on the second output on the GE B850v3:
> > >
> > > Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
> > >
> > > Each bridge has a dedicated flash containing firmware for supporting the
> > > custom design. The result is that in this design neither the STDP4028
> > > nor the STDP2690 behave as the stock bridges would. The compatible
> > > strings include the suffix "-ge-b850v3-fw" to make it clear that the
> > > driver is for the bridges with the firmware which is specific for the GE
> > > B850v3.
> > >
> > > The driver is powerless to control the video processing pipeline, as the
> > > two bridges behaves as a single one. The driver is only needed for
> > > telling the host about EDID / HPD, and for giving the host powers to ack
> > > interrupts.
> >
> > queued Patches 1,2 and 3 to drm-misc-next. Made stdp2690_get_edid static
> > in Patch #3 to fix a sparse warning.
>
> What about 4/4, aka the dt change? Do I need an ack from Rob Herring?
>
> Thanks a lot!
This one needs to go through Shawn Guo. Now that the driver and binding
are in it is probably best to ask him directly to pick it up.
Regards,
Lucas
On Fri, Mar 03, 2017 at 04:57:10PM +0100, Peter Senna Tschudin wrote:
> Configures the megachips-stdpxxxx-ge-b850v3-fw bridges on the GE
> B850v3 dts file.
>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Martyn Welch <[email protected]>
> Cc: Martin Donnelly <[email protected]>
> Cc: Javier Martinez Canillas <[email protected]>
> Cc: Enric Balletbo i Serra <[email protected]>
> Cc: Philipp Zabel <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Fabio Estevam <[email protected]>
> Signed-off-by: Peter Senna Tschudin <[email protected]>
> ---
> Unchanged since V1.
>
> arch/arm/boot/dts/imx6q-b850v3.dts | 68 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> index b237429..3ec54da 100644
> --- a/arch/arm/boot/dts/imx6q-b850v3.dts
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -72,6 +72,13 @@
> fsl,data-mapping = "spwg";
> fsl,data-width = <24>;
> status = "okay";
> +
> + port@4 {
> + reg = <4>;
Have a newline between property list and child node.
> + lvds0_out: endpoint {
> + remote-endpoint = <&stdp4028_in>;
> + };
> + };
> };
> };
>
> @@ -146,3 +153,64 @@
> &usdhc2 {
> status = "disabled";
> };
> +
> +&mux2_i2c2 {
> + status = "okay";
This okay status doesn't seem really necessary to me. If it does,
please put it at the end of property list.
> + clock-frequency = <100000>;
> +
> + stdp4028@73 {
> + compatible = "megachips,stdp4028-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
Drop this newline, as in general we do not add newline in middle of
property list.
> + reg = <0x73>;
> +
Ditto
> + interrupt-parent = <&gpio2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp4028_in: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
Have a newline between nodes.
> + port@1 {
> + reg = <1>;
> + stdp4028_out: endpoint {
> + remote-endpoint = <&stdp2690_in>;
> + };
> + };
> + };
> + };
> +
> + stdp2690@72 {
Sort device nodes under bus in order of unit address. That said,
stdp2690@72 should go before stdp4028@73.
Shawn
> + compatible = "megachips,stdp2690-ge-b850v3-fw";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x72>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + stdp2690_in: endpoint {
> + remote-endpoint = <&stdp4028_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + stdp2690_out: endpoint {
> + /* Connector for external display */
> + };
> + };
> + };
> + };
> +};
> --
> 2.9.3
>