The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as
if it returned a boolean true if the width if 8. This patch fixes the
tests where MTR_DRAM_WIDTH is misused.
Signed-off-by: Jérémy Lefaure <[email protected]>
---
drivers/edac/i5000_edac.c | 2 +-
drivers/edac/i5400_edac.c | 5 +++--
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index 1670d27bcac8..f683919981b0 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1293,7 +1293,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci)
dimm->mtype = MEM_FB_DDR2;
/* ask what device type on this row */
- if (MTR_DRAM_WIDTH(mtr))
+ if (MTR_DRAM_WIDTH(mtr) == 8)
dimm->dtype = DEV_X8;
else
dimm->dtype = DEV_X4;
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index abf6ef22e220..37a9ba71da44 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -1207,13 +1207,14 @@ static int i5400_init_dimms(struct mem_ctl_info *mci)
dimm->nr_pages = size_mb << 8;
dimm->grain = 8;
- dimm->dtype = MTR_DRAM_WIDTH(mtr) ? DEV_X8 : DEV_X4;
+ dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ?
+ DEV_X8 : DEV_X4;
dimm->mtype = MEM_FB_DDR2;
/*
* The eccc mechanism is SDDC (aka SECC), with
* is similar to Chipkill.
*/
- dimm->edac_mode = MTR_DRAM_WIDTH(mtr) ?
+ dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ?
EDAC_S8ECD8ED : EDAC_S4ECD4ED;
ndimms++;
}
--
2.12.0
On Wed, Mar 08, 2017 at 08:18:09PM -0500, Jérémy Lefaure wrote:
> The MTR_DRAM_WIDTH macro returns the data width. It is sometimes used as
> if it returned a boolean true if the width if 8. This patch fixes the
> tests where MTR_DRAM_WIDTH is misused.
>
> Signed-off-by: Jérémy Lefaure <[email protected]>
> ---
> drivers/edac/i5000_edac.c | 2 +-
> drivers/edac/i5400_edac.c | 5 +++--
> 2 files changed, 4 insertions(+), 3 deletions(-)
Applied, thanks.
--
Regards/Gruss,
Boris.
Good mailing practices for 400: avoid top-posting and trim the reply.