The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
As I don't have the hardware, I'd be very pleased if
someone may test this patch.
Signed-off-by: Philippe Reynes <[email protected]>
---
drivers/net/ethernet/via/via-velocity.c | 62 +++++++++++++++++-------------
1 files changed, 35 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
index d088788..ef9538e 100644
--- a/drivers/net/ethernet/via/via-velocity.c
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -3291,15 +3291,17 @@ static void velocity_ethtool_down(struct net_device *dev)
velocity_set_power_state(vptr, PCI_D3hot);
}
-static int velocity_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
+static int velocity_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct velocity_info *vptr = netdev_priv(dev);
struct mac_regs __iomem *regs = vptr->mac_regs;
u32 status;
+ u32 supported, advertising;
+
status = check_connection_type(vptr->mac_regs);
- cmd->supported = SUPPORTED_TP |
+ supported = SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
@@ -3308,9 +3310,9 @@ static int velocity_get_settings(struct net_device *dev,
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full;
- cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
+ advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
- cmd->advertising |=
+ advertising |=
ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
@@ -3320,19 +3322,19 @@ static int velocity_get_settings(struct net_device *dev,
} else {
switch (vptr->options.spd_dpx) {
case SPD_DPX_1000_FULL:
- cmd->advertising |= ADVERTISED_1000baseT_Full;
+ advertising |= ADVERTISED_1000baseT_Full;
break;
case SPD_DPX_100_HALF:
- cmd->advertising |= ADVERTISED_100baseT_Half;
+ advertising |= ADVERTISED_100baseT_Half;
break;
case SPD_DPX_100_FULL:
- cmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
break;
case SPD_DPX_10_HALF:
- cmd->advertising |= ADVERTISED_10baseT_Half;
+ advertising |= ADVERTISED_10baseT_Half;
break;
case SPD_DPX_10_FULL:
- cmd->advertising |= ADVERTISED_10baseT_Full;
+ advertising |= ADVERTISED_10baseT_Full;
break;
default:
break;
@@ -3340,30 +3342,35 @@ static int velocity_get_settings(struct net_device *dev,
}
if (status & VELOCITY_SPEED_1000)
- ethtool_cmd_speed_set(cmd, SPEED_1000);
+ cmd->base.speed = SPEED_1000;
else if (status & VELOCITY_SPEED_100)
- ethtool_cmd_speed_set(cmd, SPEED_100);
+ cmd->base.speed = SPEED_100;
else
- ethtool_cmd_speed_set(cmd, SPEED_10);
+ cmd->base.speed = SPEED_10;
- cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
- cmd->port = PORT_TP;
- cmd->transceiver = XCVR_INTERNAL;
- cmd->phy_address = readb(®s->MIIADR) & 0x1F;
+ cmd->base.autoneg = (status & VELOCITY_AUTONEG_ENABLE) ?
+ AUTONEG_ENABLE : AUTONEG_DISABLE;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = readb(®s->MIIADR) & 0x1F;
if (status & VELOCITY_DUPLEX_FULL)
- cmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
else
- cmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
return 0;
}
-static int velocity_set_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
+static int velocity_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct velocity_info *vptr = netdev_priv(dev);
- u32 speed = ethtool_cmd_speed(cmd);
+ u32 speed = cmd->base.speed;
u32 curr_status;
u32 new_status = 0;
int ret = 0;
@@ -3371,11 +3378,12 @@ static int velocity_set_settings(struct net_device *dev,
curr_status = check_connection_type(vptr->mac_regs);
curr_status &= (~VELOCITY_LINK_FAIL);
- new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
+ new_status |= ((cmd->base.autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
- new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
+ new_status |= ((cmd->base.duplex == DUPLEX_FULL) ?
+ VELOCITY_DUPLEX_FULL : 0);
if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
(new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) {
@@ -3644,8 +3652,6 @@ static void velocity_get_ethtool_stats(struct net_device *dev,
}
static const struct ethtool_ops velocity_ethtool_ops = {
- .get_settings = velocity_get_settings,
- .set_settings = velocity_set_settings,
.get_drvinfo = velocity_get_drvinfo,
.get_wol = velocity_ethtool_get_wol,
.set_wol = velocity_ethtool_set_wol,
@@ -3658,7 +3664,9 @@ static void velocity_get_ethtool_stats(struct net_device *dev,
.get_coalesce = velocity_get_coalesce,
.set_coalesce = velocity_set_coalesce,
.begin = velocity_ethtool_up,
- .complete = velocity_ethtool_down
+ .complete = velocity_ethtool_down,
+ .get_link_ksettings = velocity_get_link_ksettings,
+ .set_link_ksettings = velocity_set_link_ksettings,
};
#if defined(CONFIG_PM) && defined(CONFIG_INET)
--
1.7.4.4
From: Philippe Reynes <[email protected]>
Date: Wed, 8 Mar 2017 22:20:20 +0100
> The ethtool api {get|set}_settings is deprecated.
> We move this driver to new api {get|set}_link_ksettings.
>
> As I don't have the hardware, I'd be very pleased if
> someone may test this patch.
>
> Signed-off-by: Philippe Reynes <[email protected]>
Applied.