This patch set adds support for the on board SPI NOR flash on TI's AM335x
Industrial Communication Engine rev 2.x board.
Franklin S Cooper Jr (1):
ARM: dts: am335x-icev2: Add SPI based NOR
Sekhar Nori (1):
doc: dt: mtd: add w25q64 to list of supported SPI flashes
.../devicetree/bindings/mtd/jedec,spi-nor.txt | 1 +
arch/arm/boot/dts/am335x-icev2.dts | 33 ++++++++++++++++++++++
2 files changed, 34 insertions(+)
--
2.10.0
Enable support for W25Q64CVSSIG which is a Winbond 64 Mbit SPI NOR.
At boot you will see the following message:
m25p80 spi1.0: found s25fl064k, expected w25q64
This is because the JEDEC ID for this chip is the same as s25fl064k.
However, this should be harmless since both chips are essentially the
same.
Signed-off-by: Franklin S Cooper Jr <[email protected]>
Signed-off-by: Sekhar Nori <[email protected]>
---
arch/arm/boot/dts/am335x-icev2.dts | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index a2ad076..1e643dc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -245,6 +245,39 @@
spi-max-frequency = <1000000>;
spi-cpol;
};
+
+ spi_nor: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q64", "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x80000 0x100000>;
+ read-only;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x180000 0x20000>;
+ read-only;
+ };
+
+ partition@3 {
+ label = "misc";
+ reg = <0x1A0000 0x660000>;
+ };
+ };
+
};
&tscadc {
--
2.10.0
From: Sekhar Nori <[email protected]>
W25Q64 is found on TI's AM335x ICEv2 board. Add it to list
for supported SPI flash devices. This flash can be identified
using JEDEC READ ID opcode.
Signed-off-by: Sekhar Nori <[email protected]>
---
Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index 3e920ec..9ce35af 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -40,6 +40,7 @@ Required properties:
w25x80
w25x32
w25q32
+ w25q64
w25q32dw
w25q80bl
w25q128
--
2.10.0
On Tue, Mar 07, 2017 at 03:57:50PM -0600, Franklin S Cooper Jr wrote:
> From: Sekhar Nori <[email protected]>
>
> W25Q64 is found on TI's AM335x ICEv2 board. Add it to list
> for supported SPI flash devices. This flash can be identified
> using JEDEC READ ID opcode.
>
> Signed-off-by: Sekhar Nori <[email protected]>
> ---
> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Rob Herring <[email protected]>
* Franklin S Cooper Jr <[email protected]> [170307 14:01]:
> This patch set adds support for the on board SPI NOR flash on TI's AM335x
> Industrial Communication Engine rev 2.x board.
>
> Franklin S Cooper Jr (1):
> ARM: dts: am335x-icev2: Add SPI based NOR
>
> Sekhar Nori (1):
> doc: dt: mtd: add w25q64 to list of supported SPI flashes
Applying both into omap-for-v4.12/dt-v2 branch.
Thanks,
Tony