From: Jagan Teki <[email protected]>
This series adds support for lvds display, touchscreen nodes on dts for
Engicam i.CoreM6 Quad boards along with selecting few touchscreen driver
configs to imx_v6_v7_defconfig so-that select by default.
Jagan Teki (8):
ARM: dts: imx6qdl-icore: Add backlight support for lvds
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1
initial support
ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3
initial support
ARM: dts: imx6q-icore: Add LVDS support
dt-bindings: input: touchscreen: Add max11801-ts binding
ARM: dts: imx6q-icore: Add touchscreen node
ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
.../bindings/input/touchscreen/max11801-ts.txt | 18 +++++
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 76 ++++++++++++++++++++++
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 76 ++++++++++++++++++++++
arch/arm/boot/dts/imx6q-icore.dts | 34 ++++++++++
arch/arm/boot/dts/imx6qdl-icore.dtsi | 19 ++++++
arch/arm/configs/imx_v6_v7_defconfig | 2 +
7 files changed, 227 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap10.dts
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap12.dts
--
1.9.1
From: Jagan Teki <[email protected]>
i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus
openframe display carriers" which are good solution for develop
user friendly graphic user interface.
General features:
CPU NXP i.MX6Q rev1.2 at 792 MHz
RAM 1GB, 32, 64 bit, DDR3-800/1066
NAND SLC,512MB
LVDS Display TFT 12.3" industrial, 1280x480 resolution
Backlight LED backlight, brightness 350 Cd/m2
Power supply 15 to 30 Vdc
Cc: Domenico Acri <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Fix checkpatch.pl Errors/Warnings
Changes for v3:
- Use native-mode as timing0 since this is the initial lvds-channel
- Rename hsd100pxn1 reference as timing0
- Update the correct patch author
Changes for v2:
- none
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-icore-ofcap12.dts | 76 +++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap12.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 736f83e..a80a23c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -399,6 +399,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-hummingboard.dtb \
imx6q-icore.dtb \
imx6q-icore-ofcap10.dtb \
+ imx6q-icore-ofcap12.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 0000000..9e230f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <46800000>;
+ hactive = <1280>;
+ vactive = <480>;
+ hback-porch = <353>;
+ hfront-porch = <47>;
+ vback-porch = <39>;
+ vfront-porch = <4>;
+ hsync-len = <8>;
+ vsync-len = <2>;
+ };
+ };
+ };
+};
--
1.9.1
From: Jagan Teki <[email protected]>
This patch add support for lvds backlight on i.CoreM6 QDL
variant boards.
Cc: Domenico Acri <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
- remove status=okay for backlight node
- remove -1 suffix from pwm3grp iomux node
Changes for v4, v3, v2:
- none
arch/arm/boot/dts/imx6qdl-icore.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 55bebfc..56d0c5d 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -48,6 +48,13 @@
reg = <0x10000000 0x80000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 100000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -136,6 +143,12 @@
status = "okay";
};
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
@@ -246,6 +259,12 @@
>;
};
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+ >;
+ };
+
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
--
1.9.1
From: Jagan Teki <[email protected]>
Add LVDS display support for OpenFrame Capacitive touch 7 inc
display which is supported by Engicam i.CoreM6 QDL Starter Kit.
Cc: Domenico Acri <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Fix checkpatch.pl Errors/Warnings
Changes for v3:
- Use native-mode as timing0 since this is the initial lvds-channel
- Rename hsd100pxn1 reference as timing0
- Update the correct patch author
Changes for v2:
- none
arch/arm/boot/dts/imx6q-icore.dts | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 59eb7ad..73f34d1 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -57,3 +57,28 @@
&can2 {
status = "okay";
};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <18>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <60000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <30>;
+ hfront-porch = <30>;
+ vback-porch = <5>;
+ vfront-porch = <5>;
+ hsync-len = <64>;
+ vsync-len = <20>;
+ };
+ };
+ };
+};
--
1.9.1
From: Jagan Teki <[email protected]>
Add missing documentation of max11801-ts dt-binding details.
Cc: Mark Rutland <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- Newly added patch
.../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
new file mode 100644
index 0000000..b6ac452
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
@@ -0,0 +1,18 @@
+* MAXI MAX11801 Resistive touch screen controller with i2c interface
+
+Required properties:
+- compatible: must be "max11801"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+
+Example:
+
+&i2c1 {
+ ts: max11801@48 {
+ compatible = "max11801";
+ reg = <0x48>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 2>;
+ };
+};
--
1.9.1
From: Jagan Teki <[email protected]>
max11801 touchscreen on Engicam iCoreM6 Quad module is
connected via i2c1, so add tc: max11801@48 on i2c1.
Cc: Domenico Acri <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Newly added patch
arch/arm/boot/dts/imx6q-icore.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 73f34d1..8c1a572 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -58,6 +58,15 @@
status = "okay";
};
+&i2c1 {
+ ts: max11801@48 {
+ compatible = "max11801";
+ reg = <0x48>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 2>;
+ };
+};
+
&ldb {
status = "okay";
--
1.9.1
From: Jagan Teki <[email protected]>
Select CONFIG_TOUCHSCREEN_MAX11801 so that we can have touchscreen
funtionality by default on Engicam i.CoreM6 Quad boards.
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Newly added patch
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index eaba3b1..842168f 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -165,6 +165,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_EGALAX=y
CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_TOUCHSCREEN_MAX11801=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TSC2004=y
CONFIG_TOUCHSCREEN_TSC2007=y
--
1.9.1
From: Jagan Teki <[email protected]>
Select CONFIG_HID_MULTITOUCH so that we can have multi touchscreen
funtionality via USB by default on Engicam i.CoreM6 Quad with
OpenFrame Cap 10.1 display boards.
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Newly added patch
arch/arm/configs/imx_v6_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 842168f..914e8cb 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -174,6 +174,7 @@ CONFIG_TOUCHSCREEN_SX8654=y
CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
+CONFIG_HID_MULTITOUCH=y
CONFIG_SERIO_SERPORT=m
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_IMX=y
--
1.9.1
From: Jagan Teki <[email protected]>
i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus
openframe display carriers" which are good solution for develop
user friendly graphic user interface.
General features:
CPU NXP i.MX6Q rev1.2 at 792 MHz
RAM 1GB, 32, 64 bit, DDR3-800/1066
NAND SLC,512MB
LVDS Display TFT 10.1" industrial, 1280x800 resolution
Backlight LED backlight, brightness 350 Cd/m2
Power supply 15 to 30 Vdc
Cc: Domenico Acri <[email protected]>
Cc: Matteo Lisi <[email protected]>
Cc: Michael Trimarchi <[email protected]>
Cc: Shawn Guo <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v5:
- %s/arm/ARM/g with subject prefix
Changes for v4:
- Fix checkpatch.pl Errors/Warnings
Changes for v3:
- Use native-mode as timing0 since this is the initial lvds-channel
- Rename hsd100pxn1 reference as timing0
- Update the correct patch author
Changes for v2:
- none
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-icore-ofcap10.dts | 76 +++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-icore-ofcap10.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 43c27b6..736f83e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -398,6 +398,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-icore.dtb \
+ imx6q-icore-ofcap10.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-mccmon6.dtb \
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
new file mode 100644
index 0000000..49b60ca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+ model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+ compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <60000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hback-porch = <40>;
+ hfront-porch = <40>;
+ vback-porch = <10>;
+ vfront-porch = <3>;
+ hsync-len = <80>;
+ vsync-len = <10>;
+ };
+ };
+ };
+};
--
1.9.1
On Tue, Mar 14, 2017 at 03:18:14PM +0530, Jagan Teki wrote:
> From: Jagan Teki <[email protected]>
>
> Add missing documentation of max11801-ts dt-binding details.
>
> Cc: Mark Rutland <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Michael Trimarchi <[email protected]>
> Signed-off-by: Jagan Teki <[email protected]>
> ---
> Changes for v5:
> - Newly added patch
>
> .../bindings/input/touchscreen/max11801-ts.txt | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
> new file mode 100644
> index 0000000..b6ac452
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
> @@ -0,0 +1,18 @@
> +* MAXI MAX11801 Resistive touch screen controller with i2c interface
> +
> +Required properties:
> +- compatible: must be "max11801"
> +- reg: i2c slave address
> +- interrupt-parent: the phandle for the interrupt controller
> +- interrupts: touch controller interrupt
> +
> +Example:
> +
> +&i2c1 {
> + ts: max11801@48 {
Node name should be generic while label can be specific. That said, the
following form might be better choice.
max11801: touchscreen@48 {
Shawn
> + compatible = "max11801";
> + reg = <0x48>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <31 2>;
> + };
> +};
> --
> 1.9.1
>
On Tue, Mar 14, 2017 at 03:18:09PM +0530, Jagan Teki wrote:
> From: Jagan Teki <[email protected]>
> Jagan Teki (8):
> ARM: dts: imx6qdl-icore: Add backlight support for lvds
> ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1
> initial support
> ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3
> initial support
> ARM: dts: imx6q-icore: Add LVDS support
> dt-bindings: input: touchscreen: Add max11801-ts binding
> ARM: dts: imx6q-icore: Add touchscreen node
> ARM: imx_v6_v7_defconfig: Select max11801_ts touchscreen driver
> ARM: imx_v6_v7_defconfig: Select hid-multitouchdriver
Applied #1 ~ #4, #7 and #8, thanks.