If uart_flush_buffer() is called between atmel_tx_dma() and
atmel_complete_tx_dma(), the circular buffer has been cleared, but not
atmel_port->tx_len.
That leads to a circular buffer overflow (dumping (UART_XMIT_SIZE -
atmel_port->tx_len) bytes).
Tested-by: Nicolas Ferre <[email protected]>
Signed-off-by: Richard Genoud <[email protected]>
Cc: stable <[email protected]> # 3.12+
---
NB: this will apply on kernels 4.3+, for kernels before 4.3, the code
will be:
sg_dma_len(&atmel_port->sg_tx) = 0;
drivers/tty/serial/atmel_serial.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d9c05e05d896..5c23fb4e552b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1954,6 +1954,11 @@ static void atmel_flush_buffer(struct uart_port *port)
atmel_uart_writel(port, ATMEL_PDC_TCR, 0);
atmel_port->pdc_tx.ofs = 0;
}
+ /*
+ * in uart_flush_buffer(), the xmit circular buffer has just
+ * been cleared, so we have to reset tx_len accordingly.
+ */
+ atmel_port->tx_len = 0;
}
/*