This adds the binding documentation for the Xilinx LogiCORE PR
Decoupler soft core.
Signed-off-by: Moritz Fischer <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Sören Brinkmann <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
Changes from v2:
- Added refence to generic fpga-region bindings
- Fixed up reg property in example
- Added fallback to "xlnx,pr-decoupler" without version
Changes from v1:
- Added clock names & clock to example
- Merged some of the description from Michal's version
---
.../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
new file mode 100644
index 0000000..16141bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
@@ -0,0 +1,35 @@
+Xilinx LogiCORE Partial Reconfig Decoupler Softcore
+
+The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
+decouplers / fpga bridges.
+The controller can decouple/disable the bridges which prevents signal
+changes from passing through the bridge. The controller can also
+couple / enable the bridges which allows traffic to pass through the
+bridge normally.
+
+The Driver supports only MMIO handling. A PR region can have multiple
+PR Decouples which can bhe handled independently or chaines via decouple/
+decouple_status signals.
+
+Required properties:
+- compatible : Should contain "xlnx,pr-decoupler-1.00"
+- regs : base address and size for decoupler module
+- clocks : input clock to IP
+- clock-names : should contain "aclk"
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
+
+Example:
+ fpga-bridge@100000450 {
+ compatible = "xlnx,pr-decoupler-1.00",
+ "xlnx-pr-decoupler";
+ regs = <0x10000045 0x10>;
+ clocks = <&clkc 15>;
+ clock-names = "aclk";
+ bridge-enable = <0>;
+ };
--
2.7.4
This adds support for the Xilinx LogiCORE PR Decoupler
soft-ip that does decoupling of PR regions in the FPGA
fabric during partial reconfiguration.
Signed-off-by: Moritz Fischer <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Sören Brinkmann <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
Changes from v2:
- Added Michal's Signed-off-by
- Added "xlnx,pr-decoupler" unversioned fallback
Changes from v1:
- Added Michal as Co-Author since I pulled in some of his code
- Reworked clk handling in _remove()
- Pulled in Michal's version of show_enable(), ditched priv->enabled
---
drivers/fpga/Kconfig | 9 +++
drivers/fpga/Makefile | 1 +
drivers/fpga/xilinx-pr-decoupler.c | 148 +++++++++++++++++++++++++++++++++++++
3 files changed, 158 insertions(+)
create mode 100644 drivers/fpga/xilinx-pr-decoupler.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index ce861a2..ce0c91d 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -63,6 +63,15 @@ config ALTERA_FREEZE_BRIDGE
isolate one region of the FPGA from the busses while that
region is being reprogrammed.
+config XILINX_PR_DECOUPLER
+ tristate "Xilinx LogiCORE PR Decoupler"
+ depends on FPGA_BRIDGE
+ help
+ Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
+ The PR Decoupler exists in the FPGA fabric to isolate one
+ region of the FPGA from the busses while that region is
+ being reprogrammed during partial reconfig.
+
endif # FPGA
endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 8df07bc..ba94b79 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
+obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
# High Level Interfaces
obj-$(CONFIG_FPGA_REGION) += fpga-region.o
diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
new file mode 100644
index 0000000..dd37b1c
--- /dev/null
+++ b/drivers/fpga/xilinx-pr-decoupler.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2017, National Instruments Corp.
+ * Copyright (c) 2017, Xilix Inc
+ *
+ * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
+ * Decoupler IP Core.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+#include <linux/fpga/fpga-bridge.h>
+
+#define CTRL_CMD_DECOUPLE BIT(0)
+#define CTRL_CMD_COUPLE ~BIT(0)
+
+struct xlnx_pr_decoupler_data {
+ void __iomem *io_base;
+ struct clk *clk;
+};
+
+static int xlnx_pr_decoupler_enable_set(struct fpga_bridge *bridge, bool enable)
+{
+ int err;
+ struct xlnx_pr_decoupler_data *priv = bridge->priv;
+
+ err = clk_enable(priv->clk);
+ if (err)
+ return err;
+
+ if (enable)
+ writel(CTRL_CMD_COUPLE, priv->io_base);
+ else
+ writel(CTRL_CMD_DECOUPLE, priv->io_base);
+
+ clk_disable(priv->clk);
+
+ return 0;
+}
+
+static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge)
+{
+ const struct xlnx_pr_decoupler_data *priv = bridge->priv;
+ u32 status;
+ int err;
+
+ err = clk_enable(priv->clk);
+ if (err)
+ return err;
+
+ status = readl(priv->io_base);
+
+ clk_disable(priv->clk);
+
+ return !status;
+}
+
+static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
+ .enable_set = xlnx_pr_decoupler_enable_set,
+ .enable_show = xlnx_pr_decoupler_enable_show,
+};
+
+static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
+ { .compatible = "xlnx,pr-decoupler-1.00", },
+ { .compatible = "xlnx,pr-decoupler", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
+
+static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
+{
+ struct xlnx_pr_decoupler_data *priv;
+ int err;
+ struct resource *res;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->io_base))
+ return PTR_ERR(priv->io_base);
+
+ priv->clk = devm_clk_get(&pdev->dev, "aclk");
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "input clock not found\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ err = clk_prepare_enable(priv->clk);
+ if (err) {
+ dev_err(&pdev->dev, "unable to enable clock\n");
+ return err;
+ }
+
+ clk_disable(priv->clk);
+
+ err = fpga_bridge_register(&pdev->dev, "Xilinx PR Decoupler",
+ &xlnx_pr_decoupler_br_ops, priv);
+
+ if (err) {
+ dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
+ clk_unprepare(priv->clk);
+ return err;
+ }
+
+ return 0;
+}
+
+static int xlnx_pr_decoupler_remove(struct platform_device *pdev)
+{
+ struct fpga_bridge *bridge = platform_get_drvdata(pdev);
+ struct xlnx_pr_decoupler_data *p = bridge->priv;
+
+ fpga_bridge_unregister(&pdev->dev);
+
+ clk_unprepare(p->clk);
+
+ return 0;
+}
+
+static struct platform_driver xlnx_pr_decoupler_driver = {
+ .probe = xlnx_pr_decoupler_probe,
+ .remove = xlnx_pr_decoupler_remove,
+ .driver = {
+ .name = "xlnx_pr_decoupler",
+ .of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match),
+ },
+};
+
+module_platform_driver(xlnx_pr_decoupler_driver);
+
+MODULE_DESCRIPTION("Xilinx Partial Reconfiguration Decoupler");
+MODULE_AUTHOR("Moritz Fischer <[email protected]>");
+MODULE_AUTHOR("Michal Simek <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
On 17.3.2017 21:11, Moritz Fischer wrote:
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
>
> Signed-off-by: Moritz Fischer <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: Sören Brinkmann <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
>
> Changes from v2:
> - Added refence to generic fpga-region bindings
> - Fixed up reg property in example
> - Added fallback to "xlnx,pr-decoupler" without version
>
> Changes from v1:
> - Added clock names & clock to example
> - Merged some of the description from Michal's version
>
> ---
> .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..16141bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,35 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge. The controller can also
> +couple / enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +The Driver supports only MMIO handling. A PR region can have multiple
> +PR Decouples which can bhe handled independently or chaines via decouple/
> +decouple_status signals.
> +
> +Required properties:
> +- compatible : Should contain "xlnx,pr-decoupler-1.00"
here should be also that "xlnx-pr-decoupler" too.
Other than this all looks good.
Signed-off-by: Michal Simek <[email protected]>
Thanks,
Michal
On 17.3.2017 21:11, Moritz Fischer wrote:
> This adds support for the Xilinx LogiCORE PR Decoupler
> soft-ip that does decoupling of PR regions in the FPGA
> fabric during partial reconfiguration.
>
> Signed-off-by: Moritz Fischer <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: Sören Brinkmann <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
> Changes from v2:
> - Added Michal's Signed-off-by
btw: you forgot to add it above. :-)
> - Added "xlnx,pr-decoupler" unversioned fallback
>
> Changes from v1:
> - Added Michal as Co-Author since I pulled in some of his code
> - Reworked clk handling in _remove()
> - Pulled in Michal's version of show_enable(), ditched priv->enabled
>
> ---
> drivers/fpga/Kconfig | 9 +++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/xilinx-pr-decoupler.c | 148 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 158 insertions(+)
> create mode 100644 drivers/fpga/xilinx-pr-decoupler.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index ce861a2..ce0c91d 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -63,6 +63,15 @@ config ALTERA_FREEZE_BRIDGE
> isolate one region of the FPGA from the busses while that
> region is being reprogrammed.
>
> +config XILINX_PR_DECOUPLER
> + tristate "Xilinx LogiCORE PR Decoupler"
> + depends on FPGA_BRIDGE
> + help
> + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
> + The PR Decoupler exists in the FPGA fabric to isolate one
> + region of the FPGA from the busses while that region is
> + being reprogrammed during partial reconfig.
> +
> endif # FPGA
>
> endmenu
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8df07bc..ba94b79 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
> obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
> obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
> +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
>
> # High Level Interfaces
> obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
> new file mode 100644
> index 0000000..dd37b1c
> --- /dev/null
> +++ b/drivers/fpga/xilinx-pr-decoupler.c
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright (c) 2017, National Instruments Corp.
> + * Copyright (c) 2017, Xilix Inc
> + *
> + * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
> + * Decoupler IP Core.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of_device.h>
> +#include <linux/module.h>
> +#include <linux/fpga/fpga-bridge.h>
> +
> +#define CTRL_CMD_DECOUPLE BIT(0)
> +#define CTRL_CMD_COUPLE ~BIT(0)
for others - this was reported by 0-day testing system as a warning.
M
On Fri, Mar 17, 2017 at 3:11 PM, Moritz Fischer <[email protected]> wrote:
Hi Moritz,
Minor nits below. Otherwise, looks good.
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
>
> Signed-off-by: Moritz Fischer <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: Sören Brinkmann <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
Acked-by: Alan Tull <[email protected]>
> ---
>
> Changes from v2:
> - Added refence to generic fpga-region bindings
> - Fixed up reg property in example
> - Added fallback to "xlnx,pr-decoupler" without version
>
> Changes from v1:
> - Added clock names & clock to example
> - Merged some of the description from Michal's version
>
> ---
> .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..16141bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,35 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge. The controller can also
> +couple / enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +The Driver supports only MMIO handling. A PR region can have multiple
> +PR Decouples which can bhe handled independently or chaines via decouple/
s/PR Decoupler/PR Decouplers/
s/bhe/be/
s/chaines/chained/
> +decouple_status signals.
> +
> +Required properties:
> +- compatible : Should contain "xlnx,pr-decoupler-1.00"
> +- regs : base address and size for decoupler module
> +- clocks : input clock to IP
> +- clock-names : should contain "aclk"
> +
> +Optional properties:
> +- bridge-enable : 0 if driver should disable bridge at startup
> + 1 if driver should enable bridge at startup
> + Default is to leave bridge in current state.
> +
> +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
> +
> +Example:
> + fpga-bridge@100000450 {
> + compatible = "xlnx,pr-decoupler-1.00",
> + "xlnx-pr-decoupler";
> + regs = <0x10000045 0x10>;
> + clocks = <&clkc 15>;
> + clock-names = "aclk";
> + bridge-enable = <0>;
> + };
> --
> 2.7.4
>
On Fri, Mar 17, 2017 at 3:11 PM, Moritz Fischer <[email protected]> wrote:
Hi Moritz,
Looks good except for the kbuild robot warnings that need to be fixed.
Alan
> This adds support for the Xilinx LogiCORE PR Decoupler
> soft-ip that does decoupling of PR regions in the FPGA
> fabric during partial reconfiguration.
>
> Signed-off-by: Moritz Fischer <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: Sören Brinkmann <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
> Changes from v2:
> - Added Michal's Signed-off-by
> - Added "xlnx,pr-decoupler" unversioned fallback
>
> Changes from v1:
> - Added Michal as Co-Author since I pulled in some of his code
> - Reworked clk handling in _remove()
> - Pulled in Michal's version of show_enable(), ditched priv->enabled
>
> ---
> drivers/fpga/Kconfig | 9 +++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/xilinx-pr-decoupler.c | 148 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 158 insertions(+)
> create mode 100644 drivers/fpga/xilinx-pr-decoupler.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index ce861a2..ce0c91d 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -63,6 +63,15 @@ config ALTERA_FREEZE_BRIDGE
> isolate one region of the FPGA from the busses while that
> region is being reprogrammed.
>
> +config XILINX_PR_DECOUPLER
> + tristate "Xilinx LogiCORE PR Decoupler"
> + depends on FPGA_BRIDGE
> + help
> + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
> + The PR Decoupler exists in the FPGA fabric to isolate one
> + region of the FPGA from the busses while that region is
> + being reprogrammed during partial reconfig.
> +
> endif # FPGA
>
> endmenu
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8df07bc..ba94b79 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
> obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
> obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
> +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
>
> # High Level Interfaces
> obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
> new file mode 100644
> index 0000000..dd37b1c
> --- /dev/null
> +++ b/drivers/fpga/xilinx-pr-decoupler.c
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright (c) 2017, National Instruments Corp.
> + * Copyright (c) 2017, Xilix Inc
> + *
> + * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
> + * Decoupler IP Core.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of_device.h>
> +#include <linux/module.h>
> +#include <linux/fpga/fpga-bridge.h>
> +
> +#define CTRL_CMD_DECOUPLE BIT(0)
> +#define CTRL_CMD_COUPLE ~BIT(0)
> +
> +struct xlnx_pr_decoupler_data {
> + void __iomem *io_base;
> + struct clk *clk;
> +};
> +
> +static int xlnx_pr_decoupler_enable_set(struct fpga_bridge *bridge, bool enable)
> +{
> + int err;
> + struct xlnx_pr_decoupler_data *priv = bridge->priv;
> +
> + err = clk_enable(priv->clk);
> + if (err)
> + return err;
> +
> + if (enable)
> + writel(CTRL_CMD_COUPLE, priv->io_base);
> + else
> + writel(CTRL_CMD_DECOUPLE, priv->io_base);
> +
> + clk_disable(priv->clk);
> +
> + return 0;
> +}
> +
> +static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge)
> +{
> + const struct xlnx_pr_decoupler_data *priv = bridge->priv;
> + u32 status;
> + int err;
> +
> + err = clk_enable(priv->clk);
> + if (err)
> + return err;
> +
> + status = readl(priv->io_base);
> +
> + clk_disable(priv->clk);
> +
> + return !status;
> +}
> +
> +static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
> + .enable_set = xlnx_pr_decoupler_enable_set,
> + .enable_show = xlnx_pr_decoupler_enable_show,
> +};
> +
> +static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
> + { .compatible = "xlnx,pr-decoupler-1.00", },
> + { .compatible = "xlnx,pr-decoupler", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
> +
> +static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
> +{
> + struct xlnx_pr_decoupler_data *priv;
> + int err;
> + struct resource *res;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->io_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->io_base))
> + return PTR_ERR(priv->io_base);
> +
> + priv->clk = devm_clk_get(&pdev->dev, "aclk");
> + if (IS_ERR(priv->clk)) {
> + dev_err(&pdev->dev, "input clock not found\n");
> + return PTR_ERR(priv->clk);
> + }
> +
> + err = clk_prepare_enable(priv->clk);
> + if (err) {
> + dev_err(&pdev->dev, "unable to enable clock\n");
> + return err;
> + }
> +
> + clk_disable(priv->clk);
> +
> + err = fpga_bridge_register(&pdev->dev, "Xilinx PR Decoupler",
> + &xlnx_pr_decoupler_br_ops, priv);
> +
> + if (err) {
> + dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
> + clk_unprepare(priv->clk);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static int xlnx_pr_decoupler_remove(struct platform_device *pdev)
> +{
> + struct fpga_bridge *bridge = platform_get_drvdata(pdev);
> + struct xlnx_pr_decoupler_data *p = bridge->priv;
> +
> + fpga_bridge_unregister(&pdev->dev);
> +
> + clk_unprepare(p->clk);
> +
> + return 0;
> +}
> +
> +static struct platform_driver xlnx_pr_decoupler_driver = {
> + .probe = xlnx_pr_decoupler_probe,
> + .remove = xlnx_pr_decoupler_remove,
> + .driver = {
> + .name = "xlnx_pr_decoupler",
> + .of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match),
> + },
> +};
> +
> +module_platform_driver(xlnx_pr_decoupler_driver);
> +
> +MODULE_DESCRIPTION("Xilinx Partial Reconfiguration Decoupler");
> +MODULE_AUTHOR("Moritz Fischer <[email protected]>");
> +MODULE_AUTHOR("Michal Simek <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
Hi Moritz,
[auto build test ERROR on linus/master]
[also build test ERROR on v4.11-rc3 next-20170320]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Moritz-Fischer/doc-Add-bindings-document-for-Xilinx-LogiCore-PR-Decoupler/20170320-074855
config: um-allyesconfig (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
# save the attached .config to linux build tree
make ARCH=um
All errors (new ones prefixed by >>):
arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xc9f1): warning: Using 'getgrnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xc83c): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `vde_open_real':
(.text+0xcb55): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `pcap_nametoaddr':
(.text+0x1d5e5): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `pcap_nametonetaddr':
(.text+0x1d685): warning: Using 'getnetbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `pcap_nametoproto':
(.text+0x1d8a5): warning: Using 'getprotobyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
arch/um/drivers/built-in.o: In function `pcap_nametoport':
(.text+0x1d6d7): warning: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
drivers/built-in.o: In function `img_ascii_lcd_probe':
drivers/auxdisplay/img-ascii-lcd.c:384: undefined reference to `devm_ioremap_resource'
drivers/built-in.o: In function `xlnx_pr_decoupler_probe':
>> drivers/fpga/xilinx-pr-decoupler.c:92: undefined reference to `devm_ioremap_resource'
collect2: error: ld returned 1 exit status
vim +92 drivers/fpga/xilinx-pr-decoupler.c
86
87 priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
88 if (!priv)
89 return -ENOMEM;
90
91 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> 92 priv->io_base = devm_ioremap_resource(&pdev->dev, res);
93 if (IS_ERR(priv->io_base))
94 return PTR_ERR(priv->io_base);
95
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Fri, Mar 17, 2017 at 01:11:12PM -0700, Moritz Fischer wrote:
> This adds the binding documentation for the Xilinx LogiCORE PR
> Decoupler soft core.
>
> Signed-off-by: Moritz Fischer <[email protected]>
> Cc: Michal Simek <[email protected]>
> Cc: S?ren Brinkmann <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
>
> Changes from v2:
> - Added refence to generic fpga-region bindings
> - Fixed up reg property in example
> - Added fallback to "xlnx,pr-decoupler" without version
>
> Changes from v1:
> - Added clock names & clock to example
> - Merged some of the description from Michal's version
>
> ---
> .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> new file mode 100644
> index 0000000..16141bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> @@ -0,0 +1,35 @@
> +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> +
> +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> +decouplers / fpga bridges.
> +The controller can decouple/disable the bridges which prevents signal
> +changes from passing through the bridge. The controller can also
> +couple / enable the bridges which allows traffic to pass through the
> +bridge normally.
> +
> +The Driver supports only MMIO handling. A PR region can have multiple
> +PR Decouples which can bhe handled independently or chaines via decouple/
s/chaines/chains/
> +decouple_status signals.
> +
> +Required properties:
> +- compatible : Should contain "xlnx,pr-decoupler-1.00"
> +- regs : base address and size for decoupler module
> +- clocks : input clock to IP
> +- clock-names : should contain "aclk"
> +
> +Optional properties:
> +- bridge-enable : 0 if driver should disable bridge at startup
> + 1 if driver should enable bridge at startup
> + Default is to leave bridge in current state.
This is common and should move into a common doc. Maybe fpga-region.txt
works?
> +
> +See Documentation/devicetree/bindings/fpga/fpga-region.txt for generic bindings.
> +
> +Example:
> + fpga-bridge@100000450 {
> + compatible = "xlnx,pr-decoupler-1.00",
> + "xlnx-pr-decoupler";
> + regs = <0x10000045 0x10>;
> + clocks = <&clkc 15>;
> + clock-names = "aclk";
> + bridge-enable = <0>;
> + };
> --
> 2.7.4
>
On Fri, Mar 24, 2017 at 09:59:08AM -0500, Rob Herring wrote:
> On Fri, Mar 17, 2017 at 01:11:12PM -0700, Moritz Fischer wrote:
> > This adds the binding documentation for the Xilinx LogiCORE PR
> > Decoupler soft core.
> >
> > Signed-off-by: Moritz Fischer <[email protected]>
> > Cc: Michal Simek <[email protected]>
> > Cc: S?ren Brinkmann <[email protected]>
> > Cc: [email protected]
> > Cc: [email protected]
> > ---
> >
> > Changes from v2:
> > - Added refence to generic fpga-region bindings
> > - Fixed up reg property in example
> > - Added fallback to "xlnx,pr-decoupler" without version
> >
> > Changes from v1:
> > - Added clock names & clock to example
> > - Merged some of the description from Michal's version
> >
> > ---
> > .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >
> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > new file mode 100644
> > index 0000000..16141bd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> > @@ -0,0 +1,35 @@
> > +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> > +
> > +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> > +decouplers / fpga bridges.
> > +The controller can decouple/disable the bridges which prevents signal
> > +changes from passing through the bridge. The controller can also
> > +couple / enable the bridges which allows traffic to pass through the
> > +bridge normally.
> > +
> > +The Driver supports only MMIO handling. A PR region can have multiple
> > +PR Decouples which can bhe handled independently or chaines via decouple/
>
> s/chaines/chains/
Fixed in v4.
> > +decouple_status signals.
> > +
> > +Required properties:
> > +- compatible : Should contain "xlnx,pr-decoupler-1.00"
> > +- regs : base address and size for decoupler module
> > +- clocks : input clock to IP
> > +- clock-names : should contain "aclk"
> > +
> > +Optional properties:
> > +- bridge-enable : 0 if driver should disable bridge at startup
> > + 1 if driver should enable bridge at startup
> > + Default is to leave bridge in current state.
>
> This is common and should move into a common doc. Maybe fpga-region.txt
> works?
Ok will add patch for that to v5 series.
Thanks for your feedback,
Moritz
On Fri, Mar 24, 2017 at 10:23 AM, Moritz Fischer
<[email protected]> wrote:
> On Fri, Mar 24, 2017 at 09:59:08AM -0500, Rob Herring wrote:
>> On Fri, Mar 17, 2017 at 01:11:12PM -0700, Moritz Fischer wrote:
>> > This adds the binding documentation for the Xilinx LogiCORE PR
>> > Decoupler soft core.
>> >
>> > Signed-off-by: Moritz Fischer <[email protected]>
>> > Cc: Michal Simek <[email protected]>
>> > Cc: Sören Brinkmann <[email protected]>
>> > Cc: [email protected]
>> > Cc: [email protected]
>> > ---
>> >
>> > Changes from v2:
>> > - Added refence to generic fpga-region bindings
>> > - Fixed up reg property in example
>> > - Added fallback to "xlnx,pr-decoupler" without version
>> >
>> > Changes from v1:
>> > - Added clock names & clock to example
>> > - Merged some of the description from Michal's version
>> >
>> > ---
>> > .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
>> > 1 file changed, 35 insertions(+)
>> > create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>> >
>> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>> > new file mode 100644
>> > index 0000000..16141bd
>> > --- /dev/null
>> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
>> > @@ -0,0 +1,35 @@
>> > +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
>> > +
>> > +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
>> > +decouplers / fpga bridges.
>> > +The controller can decouple/disable the bridges which prevents signal
>> > +changes from passing through the bridge. The controller can also
>> > +couple / enable the bridges which allows traffic to pass through the
>> > +bridge normally.
>> > +
>> > +The Driver supports only MMIO handling. A PR region can have multiple
>> > +PR Decouples which can bhe handled independently or chaines via decouple/
>>
>> s/chaines/chains/
>
> Fixed in v4.
>
>> > +decouple_status signals.
>> > +
>> > +Required properties:
>> > +- compatible : Should contain "xlnx,pr-decoupler-1.00"
>> > +- regs : base address and size for decoupler module
>> > +- clocks : input clock to IP
>> > +- clock-names : should contain "aclk"
>> > +
>> > +Optional properties:
>> > +- bridge-enable : 0 if driver should disable bridge at startup
>> > + 1 if driver should enable bridge at startup
>> > + Default is to leave bridge in current state.
>>
>> This is common and should move into a common doc. Maybe fpga-region.txt
>> works?
>
> Ok will add patch for that to v5 series.
Arg, our emails criss-crossed. I've already sent v4 to Greg. I hope
we don't need v5 for this one thing. bridge-enable is common for the
fpga bridges (altera-fpga2sdram-bridge.txt, altera-freeze-bridge.txt,
altera-hps2fpga-bridge.txt, xilinx-pr-decoupler.txt). Probably we
need a new patch to move this common bridges binding from all the
above to fpga-region.txt or create a new fpga-bridges.txt. At first
blush, I prefer the later.
Alan
>
> Thanks for your feedback,
>
> Moritz
On Fri, Mar 24, 2017 at 12:25:25PM -0500, Alan Tull wrote:
> On Fri, Mar 24, 2017 at 10:23 AM, Moritz Fischer
> <[email protected]> wrote:
> > On Fri, Mar 24, 2017 at 09:59:08AM -0500, Rob Herring wrote:
> >> On Fri, Mar 17, 2017 at 01:11:12PM -0700, Moritz Fischer wrote:
> >> > This adds the binding documentation for the Xilinx LogiCORE PR
> >> > Decoupler soft core.
> >> >
> >> > Signed-off-by: Moritz Fischer <[email protected]>
> >> > Cc: Michal Simek <[email protected]>
> >> > Cc: S?ren Brinkmann <[email protected]>
> >> > Cc: [email protected]
> >> > Cc: [email protected]
> >> > ---
> >> >
> >> > Changes from v2:
> >> > - Added refence to generic fpga-region bindings
> >> > - Fixed up reg property in example
> >> > - Added fallback to "xlnx,pr-decoupler" without version
> >> >
> >> > Changes from v1:
> >> > - Added clock names & clock to example
> >> > - Merged some of the description from Michal's version
> >> >
> >> > ---
> >> > .../bindings/fpga/xilinx-pr-decoupler.txt | 35 ++++++++++++++++++++++
> >> > 1 file changed, 35 insertions(+)
> >> > create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> > new file mode 100644
> >> > index 0000000..16141bd
> >> > --- /dev/null
> >> > +++ b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
> >> > @@ -0,0 +1,35 @@
> >> > +Xilinx LogiCORE Partial Reconfig Decoupler Softcore
> >> > +
> >> > +The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
> >> > +decouplers / fpga bridges.
> >> > +The controller can decouple/disable the bridges which prevents signal
> >> > +changes from passing through the bridge. The controller can also
> >> > +couple / enable the bridges which allows traffic to pass through the
> >> > +bridge normally.
> >> > +
> >> > +The Driver supports only MMIO handling. A PR region can have multiple
> >> > +PR Decouples which can bhe handled independently or chaines via decouple/
> >>
> >> s/chaines/chains/
> >
> > Fixed in v4.
> >
> >> > +decouple_status signals.
> >> > +
> >> > +Required properties:
> >> > +- compatible : Should contain "xlnx,pr-decoupler-1.00"
> >> > +- regs : base address and size for decoupler module
> >> > +- clocks : input clock to IP
> >> > +- clock-names : should contain "aclk"
> >> > +
> >> > +Optional properties:
> >> > +- bridge-enable : 0 if driver should disable bridge at startup
> >> > + 1 if driver should enable bridge at startup
> >> > + Default is to leave bridge in current state.
> >>
> >> This is common and should move into a common doc. Maybe fpga-region.txt
> >> works?
> >
> > Ok will add patch for that to v5 series.
>
> Arg, our emails criss-crossed. I've already sent v4 to Greg. I hope
> we don't need v5 for this one thing. bridge-enable is common for the
> fpga bridges (altera-fpga2sdram-bridge.txt, altera-freeze-bridge.txt,
> altera-hps2fpga-bridge.txt, xilinx-pr-decoupler.txt). Probably we
> need a new patch to move this common bridges binding from all the
> above to fpga-region.txt or create a new fpga-bridges.txt. At first
> blush, I prefer the later.
Yeah, I'll just send a follow-up patch, it's not that it breaks anything
the way it is.
- Moritz