Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
now, so it's useful to be able to test that mode on an upstream
kernel. It's also been useful for me to use the same board for 32-bit
and 64-bit development.
Signed-off-by: Eric Anholt <[email protected]>
---
v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
v2: Michael's patch that #included from ../../../arm64/... in a new
bcm2837-rpi-3-b.dts.
v3: Mine, using symlinks to make sure that we don't break the split DT
tree.
v4: Rely on the new include/arm64 symlink.
Assuming positive review feedback, I assume it would be acceptable to
merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
DT branch?
arch/arm/boot/dts/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 011808490fed..27d258cb50f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
+ include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
bcm2835-rpi-zero.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
--
2.11.0
On 03/29/2017 05:26 PM, Eric Anholt wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <[email protected]>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
Either that, or I can take it directly through devicetree/next whichever
you prefer. We have not gotten feedback on whether this looks acceptable
or not though...
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
> bcm2835-rpi-zero.dtb
> dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm4708-asus-rt-ac56u.dtb \
>
--
Florian
Florian Fainelli <[email protected]> writes:
> On 03/29/2017 05:26 PM, Eric Anholt wrote:
>> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
>> now, so it's useful to be able to test that mode on an upstream
>> kernel. It's also been useful for me to use the same board for 32-bit
>> and 64-bit development.
>>
>> Signed-off-by: Eric Anholt <[email protected]>
>> ---
>>
>> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
>> v2: Michael's patch that #included from ../../../arm64/... in a new
>> bcm2837-rpi-3-b.dts.
>> v3: Mine, using symlinks to make sure that we don't break the split DT
>> tree.
>> v4: Rely on the new include/arm64 symlink.
>>
>> Assuming positive review feedback, I assume it would be acceptable to
>> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
>> DT branch?
>
> Either that, or I can take it directly through devicetree/next whichever
> you prefer. We have not gotten feedback on whether this looks acceptable
> or not though...
I would love if you could pull this patch, but it does require
shared/dt-symlinks.
Hi,
On Wed, Mar 29, 2017 at 5:26 PM, Eric Anholt <[email protected]> wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <[email protected]>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
Building straight out of (and into) the include dir is a little odd here.
A tiny wrapper *.dtb in this dir, that just includes a shared dts/dtsi
would be a lot nicer.
If you do that, we can still pick it up for 4.12.
-Olof
Olof Johansson <[email protected]> writes:
> Hi,
>
> On Wed, Mar 29, 2017 at 5:26 PM, Eric Anholt <[email protected]> wrote:
>> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
>> now, so it's useful to be able to test that mode on an upstream
>> kernel. It's also been useful for me to use the same board for 32-bit
>> and 64-bit development.
>>
>> Signed-off-by: Eric Anholt <[email protected]>
>> ---
>>
>> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
>> v2: Michael's patch that #included from ../../../arm64/... in a new
>> bcm2837-rpi-3-b.dts.
>> v3: Mine, using symlinks to make sure that we don't break the split DT
>> tree.
>> v4: Rely on the new include/arm64 symlink.
>>
>> Assuming positive review feedback, I assume it would be acceptable to
>> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
>> DT branch?
>>
>> arch/arm/boot/dts/Makefile | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 011808490fed..27d258cb50f2 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
>> bcm2835-rpi-b-plus.dtb \
>> bcm2835-rpi-a-plus.dtb \
>> bcm2836-rpi-2-b.dtb \
>> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
>
> Building straight out of (and into) the include dir is a little odd here.
>
> A tiny wrapper *.dtb in this dir, that just includes a shared dts/dtsi
> would be a lot nicer.
OK, just sent a version with a #include.