2017-04-18 23:32:47

by Eric Anholt

Subject: [PATCH] ARM: dts: bcm-cygnus: Add 911360's V3D device.

This loads the VC4 driver on the 911360_entphn platform (with the
corresponding series sent to dri-devel), which is supported by master
of the Mesa tree.

Signed-off-by: Eric Anholt <[email protected]>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 8 ++++++++
2 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index f52750c6d3ed..907a5e843364 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -406,6 +406,19 @@
status = "disabled";
};

+ v3d: v3d@180a2000 {
+ compatible = "brcm,cygnus-v3d";
+ reg = <0x180a2000 0x1000>;
+ clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+ clock-names = "v3d_clk";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vc4: gpu {
+ compatible = "brcm,cygnus-vc4";
+ };
+
adc: adc@180a6000 {
compatible = "brcm,iproc-static-adc";
#io-channel-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 8b3800f46288..037621c13290 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -57,6 +57,14 @@
};
};

+&v3d {
+ assigned-clocks =
+ <&mipipll BCM_CYGNUS_MIPIPLL>,
+ <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+ assigned-clock-rates = <525000000>, <300000000>;
+ status = "okay";
+};
+
&uart3 {
status = "okay";
};
--
2.11.0

2017-04-20 21:39:11

by Scott Branden

Subject: Re: [PATCH] ARM: dts: bcm-cygnus: Add 911360's V3D device.

Looks good - thanks for getting the V3D open source code going on this SoC!

On 17-04-18 04:32 PM, Eric Anholt wrote:
> This loads the VC4 driver on the 911360_entphn platform (with the
> corresponding series sent to dri-devel), which is supported by master
> of the Mesa tree.
>
> Signed-off-by: Eric Anholt <[email protected]>
Acked-by: Scott Branden <[email protected]>
> ---
> arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++++++++
> arch/arm/boot/dts/bcm911360_entphn.dts | 8 ++++++++
> 2 files changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index f52750c6d3ed..907a5e843364 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -406,6 +406,19 @@
> status = "disabled";
> };
>
> + v3d: v3d@180a2000 {
> + compatible = "brcm,cygnus-v3d";
> + reg = <0x180a2000 0x1000>;
> + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
> + clock-names = "v3d_clk";
> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> +
> + vc4: gpu {
> + compatible = "brcm,cygnus-vc4";
> + };
> +
> adc: adc@180a6000 {
> compatible = "brcm,iproc-static-adc";
> #io-channel-cells = <1>;
> diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
> index 8b3800f46288..037621c13290 100644
> --- a/arch/arm/boot/dts/bcm911360_entphn.dts
> +++ b/arch/arm/boot/dts/bcm911360_entphn.dts
> @@ -57,6 +57,14 @@
> };
> };
>
> +&v3d {
> + assigned-clocks =
> + <&mipipll BCM_CYGNUS_MIPIPLL>,
> + <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
> + assigned-clock-rates = <525000000>, <300000000>;
> + status = "okay";
> +};
> +
> &uart3 {
> status = "okay";
> };
>

2017-04-25 19:08:56

by Florian Fainelli

Subject: Re: [PATCH] ARM: dts: bcm-cygnus: Add 911360's V3D device.

On Tue, 18 Apr 2017 16:32:34 -0700, Eric Anholt <[email protected]> wrote:
> This loads the VC4 driver on the 911360_entphn platform (with the
> corresponding series sent to dri-devel), which is supported by master
> of the Mesa tree.
>
> Signed-off-by: Eric Anholt <[email protected]>
> ---

Applied, thanks!
--
Florian