2017-04-27 01:42:15

by Geoff Lansberry

[permalink] [raw]
Subject: [PATCH v2] NFC: trf7970a: Correct register settings for 27MHz clock

In prior commits the selected clock frequency does not propagate
correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL
register.

Signed-off-by: Geoff Lansberry <[email protected]>
---
drivers/nfc/trf7970a.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 5f040e6..c278b0e 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi)
return -EINVAL;
}

+ if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) {
+ trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ;
+ dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n");
+ } else {
+ trf->modulator_sys_clk_ctrl = 0;
+ }
+
if (of_property_read_bool(np, "en2-rf-quirk"))
trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;

--
2.7.4


2017-04-27 04:02:35

by Mark Greer

[permalink] [raw]
Subject: Re: [PATCH v2] NFC: trf7970a: Correct register settings for 27MHz clock

On Wed, Apr 26, 2017 at 09:41:48PM -0400, Geoff Lansberry wrote:

Hi Geoff.

> In prior commits the selected clock frequency does not propagate
> correctly to what is written the the TRF7970A_MODULATOR_SYS_CLK_CTRL
> register.
>
> Signed-off-by: Geoff Lansberry <[email protected]>
> ---
> drivers/nfc/trf7970a.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
> index 5f040e6..c278b0e 100644
> --- a/drivers/nfc/trf7970a.c
> +++ b/drivers/nfc/trf7970a.c
> @@ -2079,6 +2079,13 @@ static int trf7970a_probe(struct spi_device *spi)
> return -EINVAL;
> }
>
> + if (clk_freq == TRF7970A_27MHZ_CLOCK_FREQUENCY) {
> + trf->modulator_sys_clk_ctrl = TRF7970A_MODULATOR_27MHZ;
> + dev_dbg(trf->dev, "trf7970a configured for 27MHz crystal\n");
> + } else {
> + trf->modulator_sys_clk_ctrl = 0;
> + }
> +
> if (of_property_read_bool(np, "en2-rf-quirk"))
> trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW;

Looks fine to me but please rebase it on top of current nfc-next/master
as it doesn't apply to it right now.

Thanks,

Mark
--