The IPQ8074 is Qualcomm’s High-capacity 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq8074-hk01
board.
Abhishek Sahu (2):
clk: qcom: ipq8074: Add Global Clock Controller support
arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
Varadarajan Narayanan (3):
pinctrl: qcom: Add ipq8074 pinctrl driver
dt-bindings: qcom: Add IPQ8074 bindings
arm64: dts: Add ipq8074 SoC and MTP board support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 202 ++++
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 +++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq8074.c | 1033 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1220 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-ipq8074.h | 152 +++
14 files changed, 2835 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq8074.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq8074.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.txt b/Documentation/devicetree/bindings/arm/qcom.txt
index 028d16e..0ed4d39 100644
--- a/Documentation/devicetree/bindings/arm/qcom.txt
+++ b/Documentation/devicetree/bindings/arm/qcom.txt
@@ -25,6 +25,7 @@ The 'SoC' element must be one of the following strings:
msm8994
msm8996
mdm9615
+ ipq8074
The 'board' element must be one of the following strings:
@@ -33,6 +34,7 @@ The 'board' element must be one of the following strings:
dragonboard
mtp
sbc
+ hk01
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Add initial pinctrl driver to support pin configuration with
pinctrl framework for ipq8074.
Signed-off-by: Manoharan Vijaya Raghavan <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 202 ++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1220 ++++++++++++++++++++
4 files changed, 1433 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
new file mode 100644
index 0000000..1978026
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
@@ -0,0 +1,202 @@
+Qualcomm Technologies, Inc. IPQ8074 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+IPQ8074 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,ipq8074-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio121,
+ sdc1_clk,
+ sdc1_cmd,
+ sdc1_data
+ sdc2_clk,
+ sdc2_cmd,
+ sdc2_data,
+ qdsd_cmd,
+ qdsd_data0,
+ qdsd_data1,
+ qdsd_data2,
+ qdsd_data3
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ msm_mux_gpio, msm_mux_qpic_pad, msm_mux_, msm_mux_blsp5_i2c,
+ msm_mux_blsp5_spi, msm_mux_wci20, msm_mux_blsp3_spi3, msm_mux_burn0,
+ msm_mux_pcm_zsi0, msm_mux_blsp5_uart, msm_mux_mac12,
+ msm_mux_blsp3_spi0, msm_mux_burn1, msm_mux_mac01,
+ msm_mux_qdss_cti_trig_out_b0, msm_mux_qdss_cti_trig_in_b0,
+ msm_mux_qpic_pad4, msm_mux_blsp4_uart0, msm_mux_blsp4_i2c0,
+ msm_mux_blsp4_spi0, msm_mux_mac21, msm_mux_qdss_cti_trig_out_b1,
+ msm_mux_qpic_pad5, msm_mux_qdss_cti_trig_in_b1, msm_mux_qpic_pad6,
+ msm_mux_qpic_pad7, msm_mux_cxc0, msm_mux_mac13,
+ msm_mux_qdss_cti_trig_in_a1, msm_mux_qdss_cti_trig_out_a1,
+ msm_mux_wci22, msm_mux_qdss_cti_trig_in_a0, msm_mux_qpic_pad1,
+ msm_mux_qdss_cti_trig_out_a0, msm_mux_qpic_pad2, msm_mux_qpic_pad3,
+ msm_mux_qdss_traceclk_b, msm_mux_qpic_pad0, msm_mux_qdss_tracectl_b,
+ msm_mux_qpic_pad8, msm_mux_pcm_zsi1, msm_mux_qdss_tracedata_b,
+ msm_mux_led0, msm_mux_pwm04, msm_mux_led1, msm_mux_pwm14, msm_mux_led2,
+ msm_mux_pwm24, msm_mux_pwm00, msm_mux_blsp4_uart1, msm_mux_blsp4_i2c1,
+ msm_mux_blsp4_spi1, msm_mux_wci23, msm_mux_mac11, msm_mux_blsp3_spi2,
+ msm_mux_pwm10, msm_mux_pwm20, msm_mux_pwm30, msm_mux_audio_txmclk,
+ msm_mux_pwm02, msm_mux_audio_txbclk, msm_mux_pwm12,
+ msm_mux_audio_txfsync, msm_mux_pwm22, msm_mux_audio_txd, msm_mux_pwm32,
+ msm_mux_audio_rxmclk, msm_mux_pwm03, msm_mux_atest_char0,
+ msm_mux_audio_rxbclk, msm_mux_pwm13, msm_mux_atest_char1,
+ msm_mux_audio_rxfsync, msm_mux_pwm23, msm_mux_atest_char2,
+ msm_mux_audio_rxd, msm_mux_pwm33, msm_mux_atest_char3, msm_mux_pcm_drx,
+ msm_mux_mac10, msm_mux_mac00, msm_mux_pcm_dtx, msm_mux_pcm_fsync,
+ msm_mux_mac20, msm_mux_qdss_traceclk_a, msm_mux_pcm_pclk,
+ msm_mux_qdss_tracectl_a, msm_mux_atest_char, msm_mux_qdss_tracedata_a,
+ msm_mux_blsp0_uart, msm_mux_blsp0_i2c, msm_mux_blsp0_spi,
+ msm_mux_blsp1_uart, msm_mux_blsp1_i2c, msm_mux_blsp1_spi,
+ msm_mux_blsp2_uart, msm_mux_blsp2_i2c, msm_mux_blsp2_spi,
+ msm_mux_blsp3_uart, msm_mux_blsp3_i2c, msm_mux_blsp3_spi, msm_mux_pta2_0,
+ msm_mux_wci21, msm_mux_cxc1, msm_mux_blsp3_spi1, msm_mux_pta2_1,
+ msm_mux_pta2_2, msm_mux_pcie0_clk, msm_mux_dbg_out, msm_mux_cri_trng0,
+ msm_mux_pcie0_rst, msm_mux_cri_trng1, msm_mux_pcie0_wake,
+ msm_mux_cri_trng, msm_mux_pcie1_clk, msm_mux_rx2, msm_mux_ldo_update,
+ msm_mux_pcie1_rst, msm_mux_ldo_en, msm_mux_pcie1_wake,
+ msm_mux_gcc_plltest, msm_mux_sd_card, msm_mux_pwm01,
+ msm_mux_pta1_1, msm_mux_pwm11, msm_mux_rx1, msm_mux_pta1_2,
+ msm_mux_gcc_tlmm, msm_mux_pta1_0, msm_mux_pwm21, msm_mux_prng_rosc,
+ msm_mux_sd_write, msm_mux_pwm31, msm_mux_rx0, msm_mux_tsens_max,
+ msm_mux_mdc, msm_mux_mdio, msm_mux_NA,
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq8074-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <0 208 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart2: uart2-default {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ };
+
+ tx {
+ pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 3ebdc01..9e504db 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -39,6 +39,16 @@ config PINCTRL_IPQ8064
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
Qualcomm TLMM block found in the Qualcomm IPQ8064 platform.
+config PINCTRL_IPQ8074
+ tristate "Qualcomm Technologies, Inc. IPQ8074 pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for
+ the Qualcomm Technologies Inc. TLMM block found on the
+ Qualcomm Technologies Inc. IPQ8074 platform. Select this for
+ IPQ8074.
+
config PINCTRL_MSM8660
tristate "Qualcomm 8660 pin controller driver"
depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index ab47764..06c8b2a 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
+obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o
obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o
obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-ipq8074.c b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
new file mode 100644
index 0000000..5866ed6
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-ipq8074.c
@@ -0,0 +1,1220 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = 0x8 + REG_SIZE * id, \
+ .intr_status_reg = 0xc + REG_SIZE * id, \
+ .intr_target_reg = 0x8 + REG_SIZE * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+static const struct pinctrl_pin_desc ipq8074_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+
+enum ipq8074_functions {
+ msm_mux_gpio,
+ msm_mux_qpic_pad,
+ msm_mux_,
+ msm_mux_blsp5_i2c,
+ msm_mux_blsp5_spi,
+ msm_mux_wci20,
+ msm_mux_blsp3_spi3,
+ msm_mux_burn0,
+ msm_mux_pcm_zsi0,
+ msm_mux_blsp5_uart,
+ msm_mux_mac12,
+ msm_mux_blsp3_spi0,
+ msm_mux_burn1,
+ msm_mux_mac01,
+ msm_mux_qdss_cti_trig_out_b0,
+ msm_mux_qdss_cti_trig_in_b0,
+ msm_mux_qpic_pad4,
+ msm_mux_blsp4_uart0,
+ msm_mux_blsp4_i2c0,
+ msm_mux_blsp4_spi0,
+ msm_mux_mac21,
+ msm_mux_qdss_cti_trig_out_b1,
+ msm_mux_qpic_pad5,
+ msm_mux_qdss_cti_trig_in_b1,
+ msm_mux_qpic_pad6,
+ msm_mux_qpic_pad7,
+ msm_mux_cxc0,
+ msm_mux_mac13,
+ msm_mux_qdss_cti_trig_in_a1,
+ msm_mux_qdss_cti_trig_out_a1,
+ msm_mux_wci22,
+ msm_mux_qdss_cti_trig_in_a0,
+ msm_mux_qpic_pad1,
+ msm_mux_qdss_cti_trig_out_a0,
+ msm_mux_qpic_pad2,
+ msm_mux_qpic_pad3,
+ msm_mux_qdss_traceclk_b,
+ msm_mux_qpic_pad0,
+ msm_mux_qdss_tracectl_b,
+ msm_mux_qpic_pad8,
+ msm_mux_pcm_zsi1,
+ msm_mux_qdss_tracedata_b,
+ msm_mux_led0,
+ msm_mux_pwm04,
+ msm_mux_led1,
+ msm_mux_pwm14,
+ msm_mux_led2,
+ msm_mux_pwm24,
+ msm_mux_pwm00,
+ msm_mux_blsp4_uart1,
+ msm_mux_blsp4_i2c1,
+ msm_mux_blsp4_spi1,
+ msm_mux_wci23,
+ msm_mux_mac11,
+ msm_mux_blsp3_spi2,
+ msm_mux_pwm10,
+ msm_mux_pwm20,
+ msm_mux_pwm30,
+ msm_mux_audio_txmclk,
+ msm_mux_pwm02,
+ msm_mux_audio_txbclk,
+ msm_mux_pwm12,
+ msm_mux_audio_txfsync,
+ msm_mux_pwm22,
+ msm_mux_audio_txd,
+ msm_mux_pwm32,
+ msm_mux_audio_rxmclk,
+ msm_mux_pwm03,
+ msm_mux_atest_char0,
+ msm_mux_audio_rxbclk,
+ msm_mux_pwm13,
+ msm_mux_atest_char1,
+ msm_mux_audio_rxfsync,
+ msm_mux_pwm23,
+ msm_mux_atest_char2,
+ msm_mux_audio_rxd,
+ msm_mux_pwm33,
+ msm_mux_atest_char3,
+ msm_mux_pcm_drx,
+ msm_mux_mac10,
+ msm_mux_mac00,
+ msm_mux_pcm_dtx,
+ msm_mux_pcm_fsync,
+ msm_mux_mac20,
+ msm_mux_qdss_traceclk_a,
+ msm_mux_pcm_pclk,
+ msm_mux_qdss_tracectl_a,
+ msm_mux_atest_char,
+ msm_mux_qdss_tracedata_a,
+ msm_mux_blsp0_uart,
+ msm_mux_blsp0_i2c,
+ msm_mux_blsp0_spi,
+ msm_mux_blsp1_uart,
+ msm_mux_blsp1_i2c,
+ msm_mux_blsp1_spi,
+ msm_mux_blsp2_uart,
+ msm_mux_blsp2_i2c,
+ msm_mux_blsp2_spi,
+ msm_mux_blsp3_uart,
+ msm_mux_blsp3_i2c,
+ msm_mux_blsp3_spi,
+ msm_mux_pta2_0,
+ msm_mux_wci21,
+ msm_mux_cxc1,
+ msm_mux_blsp3_spi1,
+ msm_mux_pta2_1,
+ msm_mux_pta2_2,
+ msm_mux_pcie0_clk,
+ msm_mux_dbg_out,
+ msm_mux_cri_trng0,
+ msm_mux_pcie0_rst,
+ msm_mux_cri_trng1,
+ msm_mux_pcie0_wake,
+ msm_mux_cri_trng,
+ msm_mux_pcie1_clk,
+ msm_mux_rx2,
+ msm_mux_ldo_update,
+ msm_mux_pcie1_rst,
+ msm_mux_ldo_en,
+ msm_mux_pcie1_wake,
+ msm_mux_gcc_plltest,
+ msm_mux_sd_card,
+ msm_mux_pwm01,
+ msm_mux_pta1_1,
+ msm_mux_pwm11,
+ msm_mux_rx1,
+ msm_mux_pta1_2,
+ msm_mux_gcc_tlmm,
+ msm_mux_pta1_0,
+ msm_mux_pwm21,
+ msm_mux_prng_rosc,
+ msm_mux_sd_write,
+ msm_mux_pwm31,
+ msm_mux_rx0,
+ msm_mux_tsens_max,
+ msm_mux_mdc,
+ msm_mux_mdio,
+ msm_mux_NA,
+};
+
+static const char * const qpic_pad_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio9", "gpio10",
+ "gpio11", "gpio17",
+};
+
+static const char * const _groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69",
+};
+
+static const char * const blsp5_i2c_groups[] = {
+ "gpio0", "gpio2",
+};
+
+static const char * const blsp5_spi_groups[] = {
+ "gpio0", "gpio2", "gpio9", "gpio16",
+};
+
+static const char * const wci20_groups[] = {
+ "gpio0", "gpio2",
+};
+
+static const char * const blsp3_spi3_groups[] = {
+ "gpio0", "gpio2", "gpio9",
+};
+
+static const char * const burn0_groups[] = {
+ "gpio0",
+};
+
+static const char * const pcm_zsi0_groups[] = {
+ "gpio1",
+};
+
+static const char * const blsp5_uart_groups[] = {
+ "gpio0", "gpio2", "gpio9", "gpio16",
+};
+
+static const char * const mac12_groups[] = {
+ "gpio1", "gpio11",
+};
+
+static const char * const blsp3_spi0_groups[] = {
+ "gpio1", "gpio3", "gpio4",
+};
+
+static const char * const burn1_groups[] = {
+ "gpio1",
+};
+
+static const char * const mac01_groups[] = {
+ "gpio3", "gpio4",
+};
+
+static const char * const qdss_cti_trig_out_b0_groups[] = {
+ "gpio3",
+};
+
+static const char * const qdss_cti_trig_in_b0_groups[] = {
+ "gpio4",
+};
+
+static const char * const qpic_pad4_groups[] = {
+ "gpio5",
+};
+
+static const char * const blsp4_uart0_groups[] = {
+ "gpio5", "gpio6", "gpio7", "gpio8",
+};
+
+static const char * const blsp4_i2c0_groups[] = {
+ "gpio5", "gpio6",
+};
+
+static const char * const blsp4_spi0_groups[] = {
+ "gpio5", "gpio6", "gpio7", "gpio8",
+};
+
+static const char * const mac21_groups[] = {
+ "gpio5", "gpio6",
+};
+
+static const char * const qdss_cti_trig_out_b1_groups[] = {
+ "gpio5",
+};
+
+static const char * const qpic_pad5_groups[] = {
+ "gpio6",
+};
+
+static const char * const qdss_cti_trig_in_b1_groups[] = {
+ "gpio6",
+};
+
+static const char * const qpic_pad6_groups[] = {
+ "gpio7",
+};
+
+static const char * const qpic_pad7_groups[] = {
+ "gpio8",
+};
+
+static const char * const cxc0_groups[] = {
+ "gpio9", "gpio16",
+};
+
+static const char * const mac13_groups[] = {
+ "gpio9", "gpio16",
+};
+
+static const char * const qdss_cti_trig_in_a1_groups[] = {
+ "gpio9",
+};
+
+static const char * const qdss_cti_trig_out_a1_groups[] = {
+ "gpio10",
+};
+
+static const char * const wci22_groups[] = {
+ "gpio11", "gpio17",
+};
+
+static const char * const qdss_cti_trig_in_a0_groups[] = {
+ "gpio11",
+};
+
+static const char * const qpic_pad1_groups[] = {
+ "gpio12",
+};
+
+static const char * const qdss_cti_trig_out_a0_groups[] = {
+ "gpio12",
+};
+
+static const char * const qpic_pad2_groups[] = {
+ "gpio13",
+};
+
+static const char * const qpic_pad3_groups[] = {
+ "gpio14",
+};
+
+static const char * const qdss_traceclk_b_groups[] = {
+ "gpio14",
+};
+
+static const char * const qpic_pad0_groups[] = {
+ "gpio15",
+};
+
+static const char * const qdss_tracectl_b_groups[] = {
+ "gpio15",
+};
+
+static const char * const qpic_pad8_groups[] = {
+ "gpio16",
+};
+
+static const char * const pcm_zsi1_groups[] = {
+ "gpio16",
+};
+
+static const char * const qdss_tracedata_b_groups[] = {
+ "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31",
+};
+
+static const char * const led0_groups[] = {
+ "gpio18",
+};
+
+static const char * const pwm04_groups[] = {
+ "gpio18",
+};
+
+static const char * const led1_groups[] = {
+ "gpio19",
+};
+
+static const char * const pwm14_groups[] = {
+ "gpio19",
+};
+
+static const char * const led2_groups[] = {
+ "gpio20",
+};
+
+static const char * const pwm24_groups[] = {
+ "gpio20",
+};
+
+static const char * const pwm00_groups[] = {
+ "gpio21",
+};
+
+static const char * const blsp4_uart1_groups[] = {
+ "gpio21", "gpio22", "gpio23", "gpio24",
+};
+
+static const char * const blsp4_i2c1_groups[] = {
+ "gpio21", "gpio22",
+};
+
+static const char * const blsp4_spi1_groups[] = {
+ "gpio21", "gpio22", "gpio23", "gpio24",
+};
+
+static const char * const wci23_groups[] = {
+ "gpio21", "gpio22",
+};
+
+static const char * const mac11_groups[] = {
+ "gpio21", "gpio22",
+};
+
+static const char * const blsp3_spi2_groups[] = {
+ "gpio21", "gpio22", "gpio23",
+};
+
+static const char * const pwm10_groups[] = {
+ "gpio22",
+};
+
+static const char * const pwm20_groups[] = {
+ "gpio23",
+};
+
+static const char * const pwm30_groups[] = {
+ "gpio24",
+};
+
+static const char * const audio_txmclk_groups[] = {
+ "gpio25",
+};
+
+static const char * const pwm02_groups[] = {
+ "gpio25",
+};
+
+static const char * const audio_txbclk_groups[] = {
+ "gpio26",
+};
+
+static const char * const pwm12_groups[] = {
+ "gpio26",
+};
+
+static const char * const audio_txfsync_groups[] = {
+ "gpio27",
+};
+
+static const char * const pwm22_groups[] = {
+ "gpio27",
+};
+
+static const char * const audio_txd_groups[] = {
+ "gpio28",
+};
+
+static const char * const pwm32_groups[] = {
+ "gpio28",
+};
+
+static const char * const audio_rxmclk_groups[] = {
+ "gpio29",
+};
+
+static const char * const pwm03_groups[] = {
+ "gpio29",
+};
+
+static const char * const atest_char0_groups[] = {
+ "gpio29",
+};
+
+static const char * const audio_rxbclk_groups[] = {
+ "gpio30",
+};
+
+static const char * const pwm13_groups[] = {
+ "gpio30",
+};
+
+static const char * const atest_char1_groups[] = {
+ "gpio30",
+};
+
+static const char * const audio_rxfsync_groups[] = {
+ "gpio31",
+};
+
+static const char * const pwm23_groups[] = {
+ "gpio31",
+};
+
+static const char * const atest_char2_groups[] = {
+ "gpio31",
+};
+
+static const char * const audio_rxd_groups[] = {
+ "gpio32",
+};
+
+static const char * const pwm33_groups[] = {
+ "gpio32",
+};
+
+static const char * const atest_char3_groups[] = {
+ "gpio32",
+};
+
+static const char * const pcm_drx_groups[] = {
+ "gpio33",
+};
+
+static const char * const mac10_groups[] = {
+ "gpio33", "gpio34",
+};
+
+static const char * const mac00_groups[] = {
+ "gpio33", "gpio34",
+};
+
+static const char * const pcm_dtx_groups[] = {
+ "gpio34",
+};
+
+static const char * const pcm_fsync_groups[] = {
+ "gpio35",
+};
+
+static const char * const mac20_groups[] = {
+ "gpio35", "gpio36",
+};
+
+static const char * const qdss_traceclk_a_groups[] = {
+ "gpio35",
+};
+
+static const char * const pcm_pclk_groups[] = {
+ "gpio36",
+};
+
+static const char * const qdss_tracectl_a_groups[] = {
+ "gpio36",
+};
+
+static const char * const atest_char_groups[] = {
+ "gpio37",
+};
+
+static const char * const qdss_tracedata_a_groups[] = {
+ "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43",
+ "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", "gpio50",
+ "gpio51", "gpio52",
+};
+
+static const char * const blsp0_uart_groups[] = {
+ "gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp0_i2c_groups[] = {
+ "gpio38", "gpio39",
+};
+
+static const char * const blsp0_spi_groups[] = {
+ "gpio38", "gpio39", "gpio40", "gpio41",
+};
+
+static const char * const blsp1_uart_groups[] = {
+ "gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp1_i2c_groups[] = {
+ "gpio42", "gpio43",
+};
+
+static const char * const blsp1_spi_groups[] = {
+ "gpio42", "gpio43", "gpio44", "gpio45",
+};
+
+static const char * const blsp2_uart_groups[] = {
+ "gpio46", "gpio47", "gpio48", "gpio49",
+};
+
+static const char * const blsp2_i2c_groups[] = {
+ "gpio46", "gpio47",
+};
+
+static const char * const blsp2_spi_groups[] = {
+ "gpio46", "gpio47", "gpio48", "gpio49",
+};
+
+static const char * const blsp3_uart_groups[] = {
+ "gpio50", "gpio51", "gpio52", "gpio53",
+};
+
+static const char * const blsp3_i2c_groups[] = {
+ "gpio50", "gpio51",
+};
+
+static const char * const blsp3_spi_groups[] = {
+ "gpio50", "gpio51", "gpio52", "gpio53",
+};
+
+static const char * const pta2_0_groups[] = {
+ "gpio54",
+};
+
+static const char * const wci21_groups[] = {
+ "gpio54", "gpio56",
+};
+
+static const char * const cxc1_groups[] = {
+ "gpio54", "gpio56",
+};
+
+static const char * const blsp3_spi1_groups[] = {
+ "gpio54", "gpio55", "gpio56",
+};
+
+static const char * const pta2_1_groups[] = {
+ "gpio55",
+};
+
+static const char * const pta2_2_groups[] = {
+ "gpio56",
+};
+
+static const char * const pcie0_clk_groups[] = {
+ "gpio57",
+};
+
+static const char * const dbg_out_groups[] = {
+ "gpio57",
+};
+
+static const char * const cri_trng0_groups[] = {
+ "gpio57",
+};
+
+static const char * const pcie0_rst_groups[] = {
+ "gpio58",
+};
+
+static const char * const cri_trng1_groups[] = {
+ "gpio58",
+};
+
+static const char * const pcie0_wake_groups[] = {
+ "gpio59",
+};
+
+static const char * const cri_trng_groups[] = {
+ "gpio59",
+};
+
+static const char * const pcie1_clk_groups[] = {
+ "gpio60",
+};
+
+static const char * const rx2_groups[] = {
+ "gpio60",
+};
+
+static const char * const ldo_update_groups[] = {
+ "gpio60",
+};
+
+static const char * const pcie1_rst_groups[] = {
+ "gpio61",
+};
+
+static const char * const ldo_en_groups[] = {
+ "gpio61",
+};
+
+static const char * const pcie1_wake_groups[] = {
+ "gpio62",
+};
+
+static const char * const gcc_plltest_groups[] = {
+ "gpio62", "gpio63",
+};
+
+static const char * const sd_card_groups[] = {
+ "gpio63",
+};
+
+static const char * const pwm01_groups[] = {
+ "gpio63",
+};
+
+static const char * const pta1_1_groups[] = {
+ "gpio64",
+};
+
+static const char * const pwm11_groups[] = {
+ "gpio64",
+};
+
+static const char * const rx1_groups[] = {
+ "gpio64",
+};
+
+static const char * const pta1_2_groups[] = {
+ "gpio65",
+};
+
+static const char * const gcc_tlmm_groups[] = {
+ "gpio65",
+};
+
+static const char * const pta1_0_groups[] = {
+ "gpio66",
+};
+
+static const char * const pwm21_groups[] = {
+ "gpio66",
+};
+
+static const char * const prng_rosc_groups[] = {
+ "gpio66",
+};
+
+static const char * const sd_write_groups[] = {
+ "gpio67",
+};
+
+static const char * const pwm31_groups[] = {
+ "gpio67",
+};
+
+static const char * const rx0_groups[] = {
+ "gpio67",
+};
+
+static const char * const tsens_max_groups[] = {
+ "gpio67",
+};
+
+static const char * const mdc_groups[] = {
+ "gpio68",
+};
+
+static const char * const mdio_groups[] = {
+ "gpio69",
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69",
+};
+
+static const struct msm_function ipq8074_functions[] = {
+ FUNCTION(gpio),
+ FUNCTION(qpic_pad),
+ FUNCTION(),
+ FUNCTION(blsp5_i2c),
+ FUNCTION(blsp5_spi),
+ FUNCTION(wci20),
+ FUNCTION(blsp3_spi3),
+ FUNCTION(burn0),
+ FUNCTION(pcm_zsi0),
+ FUNCTION(blsp5_uart),
+ FUNCTION(mac12),
+ FUNCTION(blsp3_spi0),
+ FUNCTION(burn1),
+ FUNCTION(mac01),
+ FUNCTION(qdss_cti_trig_out_b0),
+ FUNCTION(qdss_cti_trig_in_b0),
+ FUNCTION(qpic_pad4),
+ FUNCTION(blsp4_uart0),
+ FUNCTION(blsp4_i2c0),
+ FUNCTION(blsp4_spi0),
+ FUNCTION(mac21),
+ FUNCTION(qdss_cti_trig_out_b1),
+ FUNCTION(qpic_pad5),
+ FUNCTION(qdss_cti_trig_in_b1),
+ FUNCTION(qpic_pad6),
+ FUNCTION(qpic_pad7),
+ FUNCTION(cxc0),
+ FUNCTION(mac13),
+ FUNCTION(qdss_cti_trig_in_a1),
+ FUNCTION(qdss_cti_trig_out_a1),
+ FUNCTION(wci22),
+ FUNCTION(qdss_cti_trig_in_a0),
+ FUNCTION(qpic_pad1),
+ FUNCTION(qdss_cti_trig_out_a0),
+ FUNCTION(qpic_pad2),
+ FUNCTION(qpic_pad3),
+ FUNCTION(qdss_traceclk_b),
+ FUNCTION(qpic_pad0),
+ FUNCTION(qdss_tracectl_b),
+ FUNCTION(qpic_pad8),
+ FUNCTION(pcm_zsi1),
+ FUNCTION(qdss_tracedata_b),
+ FUNCTION(led0),
+ FUNCTION(pwm04),
+ FUNCTION(led1),
+ FUNCTION(pwm14),
+ FUNCTION(led2),
+ FUNCTION(pwm24),
+ FUNCTION(pwm00),
+ FUNCTION(blsp4_uart1),
+ FUNCTION(blsp4_i2c1),
+ FUNCTION(blsp4_spi1),
+ FUNCTION(wci23),
+ FUNCTION(mac11),
+ FUNCTION(blsp3_spi2),
+ FUNCTION(pwm10),
+ FUNCTION(pwm20),
+ FUNCTION(pwm30),
+ FUNCTION(audio_txmclk),
+ FUNCTION(pwm02),
+ FUNCTION(audio_txbclk),
+ FUNCTION(pwm12),
+ FUNCTION(audio_txfsync),
+ FUNCTION(pwm22),
+ FUNCTION(audio_txd),
+ FUNCTION(pwm32),
+ FUNCTION(audio_rxmclk),
+ FUNCTION(pwm03),
+ FUNCTION(atest_char0),
+ FUNCTION(audio_rxbclk),
+ FUNCTION(pwm13),
+ FUNCTION(atest_char1),
+ FUNCTION(audio_rxfsync),
+ FUNCTION(pwm23),
+ FUNCTION(atest_char2),
+ FUNCTION(audio_rxd),
+ FUNCTION(pwm33),
+ FUNCTION(atest_char3),
+ FUNCTION(pcm_drx),
+ FUNCTION(mac10),
+ FUNCTION(mac00),
+ FUNCTION(pcm_dtx),
+ FUNCTION(pcm_fsync),
+ FUNCTION(mac20),
+ FUNCTION(qdss_traceclk_a),
+ FUNCTION(pcm_pclk),
+ FUNCTION(qdss_tracectl_a),
+ FUNCTION(atest_char),
+ FUNCTION(qdss_tracedata_a),
+ FUNCTION(blsp0_uart),
+ FUNCTION(blsp0_i2c),
+ FUNCTION(blsp0_spi),
+ FUNCTION(blsp1_uart),
+ FUNCTION(blsp1_i2c),
+ FUNCTION(blsp1_spi),
+ FUNCTION(blsp2_uart),
+ FUNCTION(blsp2_i2c),
+ FUNCTION(blsp2_spi),
+ FUNCTION(blsp3_uart),
+ FUNCTION(blsp3_i2c),
+ FUNCTION(blsp3_spi),
+ FUNCTION(pta2_0),
+ FUNCTION(wci21),
+ FUNCTION(cxc1),
+ FUNCTION(blsp3_spi1),
+ FUNCTION(pta2_1),
+ FUNCTION(pta2_2),
+ FUNCTION(pcie0_clk),
+ FUNCTION(dbg_out),
+ FUNCTION(cri_trng0),
+ FUNCTION(pcie0_rst),
+ FUNCTION(cri_trng1),
+ FUNCTION(pcie0_wake),
+ FUNCTION(cri_trng),
+ FUNCTION(pcie1_clk),
+ FUNCTION(rx2),
+ FUNCTION(ldo_update),
+ FUNCTION(pcie1_rst),
+ FUNCTION(ldo_en),
+ FUNCTION(pcie1_wake),
+ FUNCTION(gcc_plltest),
+ FUNCTION(sd_card),
+ FUNCTION(pwm01),
+ FUNCTION(pta1_1),
+ FUNCTION(pwm11),
+ FUNCTION(rx1),
+ FUNCTION(pta1_2),
+ FUNCTION(gcc_tlmm),
+ FUNCTION(pta1_0),
+ FUNCTION(pwm21),
+ FUNCTION(prng_rosc),
+ FUNCTION(sd_write),
+ FUNCTION(pwm31),
+ FUNCTION(rx0),
+ FUNCTION(tsens_max),
+ FUNCTION(mdc),
+ FUNCTION(mdio),
+};
+
+static const struct msm_pingroup ipq8074_groups[] = {
+ PINGROUP(0, qpic_pad, blsp5_uart, blsp5_i2c, blsp5_spi, wci20,
+ blsp3_spi3, NA, burn0, NA),
+ PINGROUP(1, qpic_pad, pcm_zsi0, mac12, blsp3_spi0, NA, burn1, NA, NA,
+ NA),
+ PINGROUP(2, qpic_pad, blsp5_uart, blsp5_i2c, blsp5_spi, wci20,
+ blsp3_spi3, NA, NA, NA),
+ PINGROUP(3, qpic_pad, mac01, blsp3_spi0, qdss_cti_trig_out_b0, NA, NA,
+ NA, NA, NA),
+ PINGROUP(4, qpic_pad, mac01, blsp3_spi0, qdss_cti_trig_in_b0, NA, NA,
+ NA, NA, NA),
+ PINGROUP(5, qpic_pad4, blsp4_uart0, blsp4_i2c0, blsp4_spi0, mac21,
+ qdss_cti_trig_out_b1, NA, NA, NA),
+ PINGROUP(6, qpic_pad5, blsp4_uart0, blsp4_i2c0, blsp4_spi0, mac21,
+ qdss_cti_trig_in_b1, NA, NA, NA),
+ PINGROUP(7, qpic_pad6, blsp4_uart0, blsp4_spi0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(8, qpic_pad7, blsp4_uart0, blsp4_spi0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(9, qpic_pad, blsp5_uart, blsp5_spi, cxc0, mac13, blsp3_spi3,
+ qdss_cti_trig_in_a1, NA, NA),
+ PINGROUP(10, qpic_pad, qdss_cti_trig_out_a1, NA, NA, NA, NA, NA, NA,
+ NA),
+ PINGROUP(11, qpic_pad, wci22, mac12, qdss_cti_trig_in_a0, NA, NA, NA,
+ NA, NA),
+ PINGROUP(12, qpic_pad1, qdss_cti_trig_out_a0, NA, NA, NA, NA, NA, NA,
+ NA),
+ PINGROUP(13, qpic_pad2, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(14, qpic_pad3, qdss_traceclk_b, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(15, qpic_pad0, qdss_tracectl_b, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(16, qpic_pad8, blsp5_uart, pcm_zsi1, blsp5_spi, cxc0, mac13,
+ qdss_tracedata_b, NA, NA),
+ PINGROUP(17, qpic_pad, wci22, qdss_tracedata_b, NA, NA, NA, NA, NA, NA),
+ PINGROUP(18, led0, pwm04, qdss_tracedata_b, NA, NA, NA, NA, NA, NA),
+ PINGROUP(19, led1, pwm14, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
+ PINGROUP(20, led2, pwm24, NA, qdss_tracedata_b, NA, NA, NA, NA, NA),
+ PINGROUP(21, pwm00, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci23, mac11,
+ blsp3_spi2, NA, qdss_tracedata_b),
+ PINGROUP(22, pwm10, blsp4_uart1, blsp4_i2c1, blsp4_spi1, wci23, mac11,
+ blsp3_spi2, NA, qdss_tracedata_b),
+ PINGROUP(23, pwm20, blsp4_uart1, blsp4_spi1, blsp3_spi2, NA,
+ qdss_tracedata_b, NA, NA, NA),
+ PINGROUP(24, pwm30, blsp4_uart1, blsp4_spi1, NA, qdss_tracedata_b, NA,
+ NA, NA, NA),
+ PINGROUP(25, audio_txmclk, pwm02, NA, qdss_tracedata_b, NA, NA, NA, NA,
+ NA),
+ PINGROUP(26, audio_txbclk, pwm12, NA, qdss_tracedata_b, NA, NA, NA, NA,
+ NA),
+ PINGROUP(27, audio_txfsync, pwm22, NA, qdss_tracedata_b, NA, NA, NA,
+ NA, NA),
+ PINGROUP(28, audio_txd, pwm32, NA, qdss_tracedata_b, NA, NA, NA, NA,
+ NA),
+ PINGROUP(29, audio_rxmclk, pwm03, atest_char0, NA, qdss_tracedata_b,
+ NA, NA, NA, NA),
+ PINGROUP(30, audio_rxbclk, pwm13, atest_char1, NA, qdss_tracedata_b,
+ NA, NA, NA, NA),
+ PINGROUP(31, audio_rxfsync, pwm23, atest_char2, NA, qdss_tracedata_b,
+ NA, NA, NA, NA),
+ PINGROUP(32, audio_rxd, pwm33, atest_char3, NA, NA, NA, NA, NA, NA),
+ PINGROUP(33, pcm_drx, mac10, mac00, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, pcm_dtx, mac10, mac00, NA, NA, NA, NA, NA, NA),
+ PINGROUP(35, pcm_fsync, mac20, qdss_traceclk_a, NA, NA, NA, NA, NA, NA),
+ PINGROUP(36, pcm_pclk, mac20, NA, qdss_tracectl_a, NA, NA, NA, NA, NA),
+ PINGROUP(37, atest_char, NA, qdss_tracedata_a, NA, NA, NA, NA, NA, NA),
+ PINGROUP(38, blsp0_uart, blsp0_i2c, blsp0_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(39, blsp0_uart, blsp0_i2c, blsp0_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(40, blsp0_uart, blsp0_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(41, blsp0_uart, blsp0_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(42, blsp1_uart, blsp1_i2c, blsp1_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(43, blsp1_uart, blsp1_i2c, blsp1_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(44, blsp1_uart, blsp1_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(45, blsp1_uart, blsp1_spi, qdss_tracedata_a, NA, NA, NA, NA,
+ NA, NA),
+ PINGROUP(46, blsp2_uart, blsp2_i2c, blsp2_spi, qdss_tracedata_a, NA,
+ NA, NA, NA, NA),
+ PINGROUP(47, blsp2_uart, blsp2_i2c, blsp2_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(48, blsp2_uart, blsp2_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(49, blsp2_uart, blsp2_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(50, blsp3_uart, blsp3_i2c, blsp3_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(51, blsp3_uart, blsp3_i2c, blsp3_spi, NA, qdss_tracedata_a,
+ NA, NA, NA, NA),
+ PINGROUP(52, blsp3_uart, blsp3_spi, NA, qdss_tracedata_a, NA, NA, NA,
+ NA, NA),
+ PINGROUP(53, blsp3_uart, blsp3_spi, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(54, pta2_0, wci21, cxc1, blsp3_spi1, NA, NA, NA, NA, NA),
+ PINGROUP(55, pta2_1, blsp3_spi1, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(56, pta2_2, wci21, cxc1, blsp3_spi1, NA, NA, NA, NA, NA),
+ PINGROUP(57, pcie0_clk, NA, dbg_out, cri_trng0, NA, NA, NA, NA, NA),
+ PINGROUP(58, pcie0_rst, NA, cri_trng1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(59, pcie0_wake, NA, cri_trng, NA, NA, NA, NA, NA, NA),
+ PINGROUP(60, pcie1_clk, rx2, ldo_update, NA, NA, NA, NA, NA, NA),
+ PINGROUP(61, pcie1_rst, ldo_en, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(62, pcie1_wake, gcc_plltest, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(63, sd_card, pwm01, NA, gcc_plltest, NA, NA, NA, NA, NA),
+ PINGROUP(64, pta1_1, pwm11, NA, rx1, NA, NA, NA, NA, NA),
+ PINGROUP(65, pta1_2, NA, gcc_tlmm, NA, NA, NA, NA, NA, NA),
+ PINGROUP(66, pta1_0, pwm21, prng_rosc, NA, NA, NA, NA, NA, NA),
+ PINGROUP(67, sd_write, pwm31, rx0, tsens_max, NA, NA, NA, NA, NA),
+ PINGROUP(68, mdc, NA, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(69, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
+};
+
+static const struct msm_pinctrl_soc_data ipq8074_pinctrl = {
+ .pins = ipq8074_pins,
+ .npins = ARRAY_SIZE(ipq8074_pins),
+ .functions = ipq8074_functions,
+ .nfunctions = ARRAY_SIZE(ipq8074_functions),
+ .groups = ipq8074_groups,
+ .ngroups = ARRAY_SIZE(ipq8074_groups),
+ .ngpios = 70,
+};
+
+static int ipq8074_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &ipq8074_pinctrl);
+}
+
+static const struct of_device_id ipq8074_pinctrl_of_match[] = {
+ { .compatible = "qcom,ipq8074-pinctrl", },
+ { },
+};
+
+static struct platform_driver ipq8074_pinctrl_driver = {
+ .driver = {
+ .name = "ipq8074-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = ipq8074_pinctrl_of_match,
+ },
+ .probe = ipq8074_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init ipq8074_pinctrl_init(void)
+{
+ return platform_driver_register(&ipq8074_pinctrl_driver);
+}
+arch_initcall(ipq8074_pinctrl_init);
+
+static void __exit ipq8074_pinctrl_exit(void)
+{
+ platform_driver_unregister(&ipq8074_pinctrl_driver);
+}
+module_exit(ipq8074_pinctrl_exit);
+
+MODULE_DESCRIPTION("Qualcomm ipq8074 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, ipq8074_pinctrl_of_match);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.
Signed-off-by: Manoharan Vijaya Raghavan <[email protected]>
Signed-off-by: Abhishek Sahu <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 ++++++++++
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 ++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc0f02d..7c6963e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..c150bea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,48 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+ compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+
+ soc: soc {
+ pinctrl@1000000 {
+ serial_4_pins: serial4_pinmux {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "blsp4_uart1";
+ bias-disable;
+ };
+ };
+ };
+
+ serial@78b3000 {
+ pinctrl-0 = <&serial_4_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..f910cc0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074";
+ compatible = "qcom,ipq8074";
+
+ soc: soc {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ pinctrl@1000000 {
+ compatible = "qcom,ipq8074-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0xb000000 0x1000>,
+ <0xb002000 0x1000>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ gcc: gcc@1800000 {
+ compatible = "qcom,gcc-ipq8074";
+ reg = <0x1800000 0x80000>;
+ #clock-cells = <0x1>;
+ #reset-cells = <0x1>;
+ };
+
+ serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b3000 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ cpu-map {
+
+ cluster0 {
+
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+ };
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
From: Abhishek Sahu <[email protected]>
These configs are required for booting kernel in QCOM
IPQ8074 boards.
Signed-off-by: Abhishek Sahu <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7c48028..e6aeb69 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -266,6 +266,7 @@ CONFIG_SPI_SPIDEV=m
CONFIG_SPI_S3C64XX=y
CONFIG_SPMI=y
CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_IPQ8074=y
CONFIG_PINCTRL_MAX77620=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_PINCTRL_MSM8994=y
@@ -439,6 +440,7 @@ CONFIG_COMMON_CLK_PWM=y
CONFIG_COMMON_CLK_RK808=y
CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_IPQ_GCC_8074=y
CONFIG_MSM_GCC_8916=y
CONFIG_MSM_GCC_8994=y
CONFIG_MSM_MMCC_8996=y
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
From: Abhishek Sahu <[email protected]>
This patch adds support for the global clock controller found on
the IPQ8074 based devices. This includes UART, I2C, SPI etc.
Signed-off-by: Abhishek Sahu <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
---
.../devicetree/bindings/clock/qcom,gcc.txt | 1 +
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq8074.c | 1033 ++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-ipq8074.h | 152 +++
5 files changed, 1196 insertions(+)
create mode 100644 drivers/clk/qcom/gcc-ipq8074.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq8074.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 5b4dfc1..551d03b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -8,6 +8,7 @@ Required properties :
"qcom,gcc-apq8084"
"qcom,gcc-ipq8064"
"qcom,gcc-ipq4019"
+ "qcom,gcc-ipq8074"
"qcom,gcc-msm8660"
"qcom,gcc-msm8916"
"qcom,gcc-msm8960"
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 5fb8d74..9f6c278 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -82,6 +82,15 @@ config IPQ_LCC_806X
Say Y if you want to use audio devices such as i2s, pcm,
S/PDIF, etc.
+config IPQ_GCC_8074
+ tristate "IPQ8074 Global Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for global clock controller on ipq8074 devices.
+ Say Y if you want to use peripheral devices such as UART, SPI,
+ i2c, USB, SD/eMMC, etc. Select this for the root clock
+ of ipq8074.
+
config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
depends on COMMON_CLK_QCOM
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1c3e222..3f3aff2 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
+obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
obj-$(CONFIG_MDM_LCC_9615) += lcc-mdm9615.o
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
new file mode 100644
index 0000000..e1eb0df
--- /dev/null
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -0,0 +1,1033 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-branch.h"
+#include "clk-alpha-pll.h"
+#include "reset.h"
+
+#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
+
+enum {
+ P_XO,
+ P_GPLL0,
+ P_GPLL0_DIV2,
+};
+
+static const char * const gcc_xo_gpll0_gpll0_out_main_div2[] = {
+ "xo",
+ "gpll0",
+ "gpll0_out_main_div2",
+};
+
+static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = {
+ { P_XO, 0 },
+ { P_GPLL0, 1 },
+ { P_GPLL0_DIV2, 4 },
+};
+
+static struct clk_alpha_pll gpll0_main = {
+ .offset = 0x21000,
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_main",
+ .parent_names = (const char *[]){
+ "xo"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_ops,
+ },
+ },
+};
+
+static struct clk_fixed_factor gpll0_out_main_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_out_main_div2",
+ .parent_names = (const char *[]){
+ "gpll0_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_alpha_pll_postdiv gpll0 = {
+ .offset = 0x21000,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll0",
+ .parent_names = (const char *[]){
+ "gpll0_main"
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ },
+};
+
+struct freq_tbl ftbl_pcnoc_bfdcd_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(50000000, P_GPLL0, 16, 0, 0),
+ F(100000000, P_GPLL0, 8, 0, 0),
+ { }
+};
+
+struct clk_rcg2 pcnoc_bfdcd_clk_src = {
+ .cmd_rcgr = 0x27000,
+ .freq_tbl = ftbl_pcnoc_bfdcd_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "pcnoc_bfdcd_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
+static struct clk_fixed_factor pcnoc_clk_src = {
+ .mult = 1,
+ .div = 1,
+ .hw.init = &(struct clk_init_data){
+ .name = "pcnoc_clk_src",
+ .parent_names = (const char *[]){
+ "pcnoc_bfdcd_clk_src"
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_branch gcc_sleep_clk_src = {
+ .halt_reg = 0x30000,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x30000,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_sleep_clk_src",
+ .parent_names = (const char *[]){
+ "sleep_clk"
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+struct freq_tbl ftbl_blsp1_qup_i2c_apps_clk_src[] = {
+ F(19200000, P_XO, 1, 0, 0),
+ F(25000000, P_GPLL0_DIV2, 16, 0, 0),
+ F(50000000, P_GPLL0, 16, 0, 0),
+ { }
+};
+
+struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x0200c,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup1_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct freq_tbl ftbl_blsp1_qup_spi_apps_clk_src[] = {
+ F(960000, P_XO, 10, 1, 2),
+ F(4800000, P_XO, 4, 0, 0),
+ F(9600000, P_XO, 2, 0, 0),
+ F(12500000, P_GPLL0_DIV2, 16, 1, 2),
+ F(16000000, P_GPLL0, 10, 1, 5),
+ F(19200000, P_XO, 1, 0, 0),
+ F(25000000, P_GPLL0, 16, 1, 2),
+ F(50000000, P_GPLL0, 16, 0, 0),
+ { }
+};
+
+struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = {
+ .cmd_rcgr = 0x02024,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup1_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x03000,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup2_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = {
+ .cmd_rcgr = 0x03014,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup2_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup3_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x04000,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup3_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup3_spi_apps_clk_src = {
+ .cmd_rcgr = 0x04014,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup3_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup4_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x05000,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup4_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup4_spi_apps_clk_src = {
+ .cmd_rcgr = 0x05014,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup4_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup5_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x06000,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup5_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup5_spi_apps_clk_src = {
+ .cmd_rcgr = 0x06014,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup5_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup6_i2c_apps_clk_src = {
+ .cmd_rcgr = 0x07000,
+ .freq_tbl = ftbl_blsp1_qup_i2c_apps_clk_src,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup6_i2c_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_qup6_spi_apps_clk_src = {
+ .cmd_rcgr = 0x07014,
+ .freq_tbl = ftbl_blsp1_qup_spi_apps_clk_src,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_qup6_spi_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct freq_tbl ftbl_blsp1_uart_apps_clk_src[] = {
+ F(3686400, P_GPLL0_DIV2, 1, 144, 15625),
+ F(7372800, P_GPLL0_DIV2, 1, 288, 15625),
+ F(14745600, P_GPLL0_DIV2, 1, 576, 15625),
+ F(16000000, P_GPLL0_DIV2, 5, 1, 5),
+ F(19200000, P_XO, 1, 0, 0),
+ F(24000000, P_GPLL0, 1, 3, 100),
+ F(25000000, P_GPLL0, 16, 1, 2),
+ F(32000000, P_GPLL0, 1, 1, 25),
+ F(40000000, P_GPLL0, 1, 1, 20),
+ F(46400000, P_GPLL0, 1, 29, 500),
+ F(48000000, P_GPLL0, 1, 3, 50),
+ F(51200000, P_GPLL0, 1, 8, 125),
+ F(56000000, P_GPLL0, 1, 7, 100),
+ F(58982400, P_GPLL0, 1, 1152, 15625),
+ F(60000000, P_GPLL0, 1, 3, 40),
+ F(64000000, P_GPLL0, 12.5, 1, 1),
+ { }
+};
+
+struct clk_rcg2 blsp1_uart1_apps_clk_src = {
+ .cmd_rcgr = 0x02044,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart1_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_uart2_apps_clk_src = {
+ .cmd_rcgr = 0x03034,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart2_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_uart3_apps_clk_src = {
+ .cmd_rcgr = 0x04034,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart3_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_uart4_apps_clk_src = {
+ .cmd_rcgr = 0x05034,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart4_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_uart5_apps_clk_src = {
+ .cmd_rcgr = 0x06034,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart5_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+struct clk_rcg2 blsp1_uart6_apps_clk_src = {
+ .cmd_rcgr = 0x07034,
+ .freq_tbl = ftbl_blsp1_uart_apps_clk_src,
+ .mnd_width = 16,
+ .hid_width = 5,
+ .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "blsp1_uart6_apps_clk_src",
+ .parent_names = gcc_xo_gpll0_gpll0_out_main_div2,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch gcc_blsp1_ahb_clk = {
+ .halt_reg = 0x01008,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x01008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_ahb_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = {
+ .halt_reg = 0x02008,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x02008,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup1_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup1_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = {
+ .halt_reg = 0x02004,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x02004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup1_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup1_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = {
+ .halt_reg = 0x03010,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x03010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup2_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup2_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = {
+ .halt_reg = 0x0300c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0300c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup2_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup2_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = {
+ .halt_reg = 0x04010,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x04010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup3_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup3_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = {
+ .halt_reg = 0x0400c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0400c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup3_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup3_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup4_i2c_apps_clk = {
+ .halt_reg = 0x05010,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x05010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup4_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup4_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup4_spi_apps_clk = {
+ .halt_reg = 0x0500c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0500c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup4_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup4_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup5_i2c_apps_clk = {
+ .halt_reg = 0x06010,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x06010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup5_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup5_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup5_spi_apps_clk = {
+ .halt_reg = 0x0600c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0600c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup5_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup5_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = {
+ .halt_reg = 0x07010,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x07010,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup6_i2c_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup6_i2c_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = {
+ .halt_reg = 0x0700c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0700c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_qup6_spi_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_qup6_spi_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart1_apps_clk = {
+ .halt_reg = 0x0203c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0203c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart1_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart1_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart2_apps_clk = {
+ .halt_reg = 0x0302c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0302c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart2_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart2_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart3_apps_clk = {
+ .halt_reg = 0x0402c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0402c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart3_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart3_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart4_apps_clk = {
+ .halt_reg = 0x0502c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0502c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart4_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart4_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart5_apps_clk = {
+ .halt_reg = 0x0602c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0602c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart5_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart5_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_blsp1_uart6_apps_clk = {
+ .halt_reg = 0x0702c,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x0702c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_blsp1_uart6_apps_clk",
+ .parent_names = (const char *[]){
+ "blsp1_uart6_apps_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+ .halt_reg = 0x13004,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x13004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_prng_ahb_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_ahb_clk = {
+ .halt_reg = 0x57024,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x57024,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qpic_ahb_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qpic_clk = {
+ .halt_reg = 0x57020,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x57020,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qpic_clk",
+ .parent_names = (const char *[]){
+ "pcnoc_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_hw *gcc_ipq8074_hws[] = {
+ &gpll0_out_main_div2.hw,
+ &pcnoc_clk_src.hw,
+};
+
+static struct clk_regmap *gcc_ipq8074_clks[] = {
+ [GPLL0_MAIN] = &gpll0_main.clkr,
+ [GPLL0] = &gpll0.clkr,
+ [PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr,
+ [GCC_SLEEP_CLK_SRC] = &gcc_sleep_clk_src.clkr,
+ [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr,
+ [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr,
+ [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr,
+ [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr,
+ [BLSP1_QUP5_I2C_APPS_CLK_SRC] = &blsp1_qup5_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP5_SPI_APPS_CLK_SRC] = &blsp1_qup5_spi_apps_clk_src.clkr,
+ [BLSP1_QUP6_I2C_APPS_CLK_SRC] = &blsp1_qup6_i2c_apps_clk_src.clkr,
+ [BLSP1_QUP6_SPI_APPS_CLK_SRC] = &blsp1_qup6_spi_apps_clk_src.clkr,
+ [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr,
+ [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr,
+ [BLSP1_UART3_APPS_CLK_SRC] = &blsp1_uart3_apps_clk_src.clkr,
+ [BLSP1_UART4_APPS_CLK_SRC] = &blsp1_uart4_apps_clk_src.clkr,
+ [BLSP1_UART5_APPS_CLK_SRC] = &blsp1_uart5_apps_clk_src.clkr,
+ [BLSP1_UART6_APPS_CLK_SRC] = &blsp1_uart6_apps_clk_src.clkr,
+ [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr,
+ [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr,
+ [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr,
+ [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr,
+ [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr,
+ [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr,
+ [GCC_BLSP1_UART3_APPS_CLK] = &gcc_blsp1_uart3_apps_clk.clkr,
+ [GCC_BLSP1_UART4_APPS_CLK] = &gcc_blsp1_uart4_apps_clk.clkr,
+ [GCC_BLSP1_UART5_APPS_CLK] = &gcc_blsp1_uart5_apps_clk.clkr,
+ [GCC_BLSP1_UART6_APPS_CLK] = &gcc_blsp1_uart6_apps_clk.clkr,
+ [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
+ [GCC_QPIC_AHB_CLK] = &gcc_qpic_ahb_clk.clkr,
+ [GCC_QPIC_CLK] = &gcc_qpic_clk.clkr,
+};
+
+static const struct qcom_reset_map gcc_ipq8074_resets[] = {
+ [GCC_BLSP1_BCR] = { 0x01000, 0 },
+ [GCC_BLSP1_QUP1_BCR] = { 0x02000, 0 },
+ [GCC_BLSP1_UART1_BCR] = { 0x02038, 0 },
+ [GCC_BLSP1_QUP2_BCR] = { 0x03008, 0 },
+ [GCC_BLSP1_UART2_BCR] = { 0x03028, 0 },
+ [GCC_BLSP1_QUP3_BCR] = { 0x04008, 0 },
+ [GCC_BLSP1_UART3_BCR] = { 0x04028, 0 },
+ [GCC_BLSP1_QUP4_BCR] = { 0x05008, 0 },
+ [GCC_BLSP1_UART4_BCR] = { 0x05028, 0 },
+ [GCC_BLSP1_QUP5_BCR] = { 0x06008, 0 },
+ [GCC_BLSP1_UART5_BCR] = { 0x06028, 0 },
+ [GCC_BLSP1_QUP6_BCR] = { 0x07008, 0 },
+ [GCC_BLSP1_UART6_BCR] = { 0x07028, 0 },
+ [GCC_IMEM_BCR] = { 0x0e000, 0 },
+ [GCC_SMMU_BCR] = { 0x12000, 0 },
+ [GCC_APSS_TCU_BCR] = { 0x12050, 0 },
+ [GCC_SMMU_XPU_BCR] = { 0x12054, 0 },
+ [GCC_PCNOC_TBU_BCR] = { 0x12058, 0 },
+ [GCC_SMMU_CFG_BCR] = { 0x1208c, 0 },
+ [GCC_PRNG_BCR] = { 0x13000, 0 },
+ [GCC_BOOT_ROM_BCR] = { 0x13008, 0 },
+ [GCC_CRYPTO_BCR] = { 0x16000, 0 },
+ [GCC_WCSS_BCR] = { 0x18000, 0 },
+ [GCC_WCSS_Q6_BCR] = { 0x18100, 0 },
+ [GCC_NSS_BCR] = { 0x19000, 0 },
+ [GCC_SEC_CTRL_BCR] = { 0x1a000, 0 },
+ [GCC_ADSS_BCR] = { 0x1c000, 0 },
+ [GCC_DDRSS_BCR] = { 0x1e000, 0 },
+ [GCC_SYSTEM_NOC_BCR] = { 0x26000, 0 },
+ [GCC_PCNOC_BCR] = { 0x27018, 0 },
+ [GCC_TCSR_BCR] = { 0x28000, 0 },
+ [GCC_QDSS_BCR] = { 0x29000, 0 },
+ [GCC_DCD_BCR] = { 0x2a000, 0 },
+ [GCC_MSG_RAM_BCR] = { 0x2b000, 0 },
+ [GCC_MPM_BCR] = { 0x2c000, 0 },
+ [GCC_SPMI_BCR] = { 0x2e000, 0 },
+ [GCC_SPDM_BCR] = { 0x2f000, 0 },
+ [GCC_RBCPR_BCR] = { 0x33000, 0 },
+ [GCC_RBCPR_MX_BCR] = { 0x33014, 0 },
+ [GCC_TLMM_BCR] = { 0x34000, 0 },
+ [GCC_RBCPR_WCSS_BCR] = { 0x3a000, 0 },
+ [GCC_USB0_PHY_BCR] = { 0x3e034, 0 },
+ [GCC_USB3PHY_0_PHY_BCR] = { 0x3e03c, 0 },
+ [GCC_USB0_BCR] = { 0x3e070, 0 },
+ [GCC_USB1_PHY_BCR] = { 0x3f034, 0 },
+ [GCC_USB3PHY_1_PHY_BCR] = { 0x3f03c, 0 },
+ [GCC_USB1_BCR] = { 0x3f070, 0 },
+ [GCC_QUSB2_0_PHY_BCR] = { 0x4103c, 0 },
+ [GCC_QUSB2_1_PHY_BCR] = { 0x41040, 0 },
+ [GCC_SDCC1_BCR] = { 0x42000, 0 },
+ [GCC_SDCC2_BCR] = { 0x43000, 0 },
+ [GCC_SNOC_BUS_TIMEOUT0_BCR] = { 0x47000, 0 },
+ [GCC_SNOC_BUS_TIMEOUT2_BCR] = { 0x47008, 0 },
+ [GCC_SNOC_BUS_TIMEOUT3_BCR] = { 0x47010, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT0_BCR] = { 0x48000, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT1_BCR] = { 0x48008, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT2_BCR] = { 0x48010, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT3_BCR] = { 0x48018, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT4_BCR] = { 0x48020, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT5_BCR] = { 0x48028, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT6_BCR] = { 0x48030, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT7_BCR] = { 0x48038, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT8_BCR] = { 0x48040, 0 },
+ [GCC_PCNOC_BUS_TIMEOUT9_BCR] = { 0x48048, 0 },
+ [GCC_UNIPHY0_BCR] = { 0x56000, 0 },
+ [GCC_UNIPHY1_BCR] = { 0x56100, 0 },
+ [GCC_UNIPHY2_BCR] = { 0x56200, 0 },
+ [GCC_CMN_12GPLL_BCR] = { 0x56300, 0 },
+ [GCC_QPIC_BCR] = { 0x57018, 0 },
+ [GCC_MDIO_BCR] = { 0x58000, 0 },
+ [GCC_PCIE1_TBU_BCR] = { 0x65000, 0 },
+ [GCC_WCSS_CORE_TBU_BCR] = { 0x66000, 0 },
+ [GCC_WCSS_Q6_TBU_BCR] = { 0x67000, 0 },
+ [GCC_USB0_TBU_BCR] = { 0x6a000, 0 },
+ [GCC_USB1_TBU_BCR] = { 0x6a004, 0 },
+ [GCC_PCIE0_TBU_BCR] = { 0x6b000, 0 },
+ [GCC_NSS_NOC_TBU_BCR] = { 0x6e000, 0 },
+ [GCC_PCIE0_BCR] = { 0x75004, 0 },
+ [GCC_PCIE0_PHY_BCR] = { 0x75038, 0 },
+ [GCC_PCIE0PHY_PHY_BCR] = { 0x7503c, 0 },
+ [GCC_PCIE0_LINK_DOWN_BCR] = { 0x75044, 0 },
+ [GCC_PCIE1_BCR] = { 0x76004, 0 },
+ [GCC_PCIE1_PHY_BCR] = { 0x76038, 0 },
+ [GCC_PCIE1PHY_PHY_BCR] = { 0x7603c, 0 },
+ [GCC_PCIE1_LINK_DOWN_BCR] = { 0x76044, 0 },
+ [GCC_DCC_BCR] = { 0x77000, 0 },
+ [GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR] = { 0x78000, 0 },
+ [GCC_APC1_VOLTAGE_DROOP_DETECTOR_BCR] = { 0x79000, 0 },
+ [GCC_SMMU_CATS_BCR] = { 0x7c000, 0 },
+};
+
+static const struct of_device_id gcc_ipq8074_match_table[] = {
+ { .compatible = "qcom,gcc-ipq8074" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gcc_ipq8074_match_table);
+
+static const struct regmap_config gcc_ipq8074_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x7fffc,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc gcc_ipq8074_desc = {
+ .config = &gcc_ipq8074_regmap_config,
+ .clks = gcc_ipq8074_clks,
+ .num_clks = ARRAY_SIZE(gcc_ipq8074_clks),
+ .resets = gcc_ipq8074_resets,
+ .num_resets = ARRAY_SIZE(gcc_ipq8074_resets),
+};
+
+static int gcc_ipq8074_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct clk *clk;
+
+ for (i = 0; i < ARRAY_SIZE(gcc_ipq8074_hws); i++) {
+ clk = devm_clk_register(&pdev->dev, gcc_ipq8074_hws[i]);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+ }
+
+ ret = qcom_cc_probe(pdev, &gcc_ipq8074_desc);
+
+ return ret;
+}
+
+static struct platform_driver gcc_ipq8074_driver = {
+ .probe = gcc_ipq8074_probe,
+ .driver = {
+ .name = "qcom,gcc-ipq8074",
+ .owner = THIS_MODULE,
+ .of_match_table = gcc_ipq8074_match_table,
+ },
+};
+
+static int __init gcc_ipq8074_init(void)
+{
+ return platform_driver_register(&gcc_ipq8074_driver);
+}
+core_initcall(gcc_ipq8074_init);
+
+static void __exit gcc_ipq8074_exit(void)
+{
+ platform_driver_unregister(&gcc_ipq8074_driver);
+}
+module_exit(gcc_ipq8074_exit);
+
+MODULE_DESCRIPTION("QCOM GCC IPQ8074 Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:gcc-ipq8074");
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq8074.h b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
new file mode 100644
index 0000000..370c83c
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2016-2017, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_IPQ_GCC_8074_H
+#define _DT_BINDINGS_CLOCK_IPQ_GCC_8074_H
+
+#define GPLL0 0
+#define GPLL0_MAIN 1
+#define GCC_SLEEP_CLK_SRC 2
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC 3
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC 4
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC 5
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC 6
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC 7
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC 8
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC 9
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC 10
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC 11
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC 12
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC 13
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC 14
+#define BLSP1_UART1_APPS_CLK_SRC 15
+#define BLSP1_UART2_APPS_CLK_SRC 16
+#define BLSP1_UART3_APPS_CLK_SRC 17
+#define BLSP1_UART4_APPS_CLK_SRC 18
+#define BLSP1_UART5_APPS_CLK_SRC 19
+#define BLSP1_UART6_APPS_CLK_SRC 20
+#define GCC_BLSP1_AHB_CLK 21
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 22
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 23
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 24
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 25
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 26
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 27
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK 28
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK 29
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK 30
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK 31
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK 32
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK 33
+#define GCC_BLSP1_UART1_APPS_CLK 34
+#define GCC_BLSP1_UART2_APPS_CLK 35
+#define GCC_BLSP1_UART3_APPS_CLK 36
+#define GCC_BLSP1_UART4_APPS_CLK 37
+#define GCC_BLSP1_UART5_APPS_CLK 38
+#define GCC_BLSP1_UART6_APPS_CLK 39
+#define GCC_PRNG_AHB_CLK 40
+#define GCC_QPIC_AHB_CLK 41
+#define GCC_QPIC_CLK 42
+#define PCNOC_BFDCD_CLK_SRC 43
+
+#define GCC_BLSP1_BCR 0
+#define GCC_BLSP1_QUP1_BCR 1
+#define GCC_BLSP1_UART1_BCR 2
+#define GCC_BLSP1_QUP2_BCR 3
+#define GCC_BLSP1_UART2_BCR 4
+#define GCC_BLSP1_QUP3_BCR 5
+#define GCC_BLSP1_UART3_BCR 6
+#define GCC_BLSP1_QUP4_BCR 7
+#define GCC_BLSP1_UART4_BCR 8
+#define GCC_BLSP1_QUP5_BCR 9
+#define GCC_BLSP1_UART5_BCR 10
+#define GCC_BLSP1_QUP6_BCR 11
+#define GCC_BLSP1_UART6_BCR 12
+#define GCC_IMEM_BCR 13
+#define GCC_SMMU_BCR 14
+#define GCC_APSS_TCU_BCR 15
+#define GCC_SMMU_XPU_BCR 16
+#define GCC_PCNOC_TBU_BCR 17
+#define GCC_SMMU_CFG_BCR 18
+#define GCC_PRNG_BCR 19
+#define GCC_BOOT_ROM_BCR 20
+#define GCC_CRYPTO_BCR 21
+#define GCC_WCSS_BCR 22
+#define GCC_WCSS_Q6_BCR 23
+#define GCC_NSS_BCR 24
+#define GCC_SEC_CTRL_BCR 25
+#define GCC_ADSS_BCR 26
+#define GCC_DDRSS_BCR 27
+#define GCC_SYSTEM_NOC_BCR 28
+#define GCC_PCNOC_BCR 29
+#define GCC_TCSR_BCR 30
+#define GCC_QDSS_BCR 31
+#define GCC_DCD_BCR 32
+#define GCC_MSG_RAM_BCR 33
+#define GCC_MPM_BCR 34
+#define GCC_SPMI_BCR 35
+#define GCC_SPDM_BCR 36
+#define GCC_RBCPR_BCR 37
+#define GCC_RBCPR_MX_BCR 38
+#define GCC_TLMM_BCR 39
+#define GCC_RBCPR_WCSS_BCR 40
+#define GCC_USB0_PHY_BCR 41
+#define GCC_USB3PHY_0_PHY_BCR 42
+#define GCC_USB0_BCR 43
+#define GCC_USB1_PHY_BCR 44
+#define GCC_USB3PHY_1_PHY_BCR 45
+#define GCC_USB1_BCR 46
+#define GCC_QUSB2_0_PHY_BCR 47
+#define GCC_QUSB2_1_PHY_BCR 48
+#define GCC_SDCC1_BCR 49
+#define GCC_SDCC2_BCR 50
+#define GCC_SNOC_BUS_TIMEOUT0_BCR 51
+#define GCC_SNOC_BUS_TIMEOUT2_BCR 52
+#define GCC_SNOC_BUS_TIMEOUT3_BCR 53
+#define GCC_PCNOC_BUS_TIMEOUT0_BCR 54
+#define GCC_PCNOC_BUS_TIMEOUT1_BCR 55
+#define GCC_PCNOC_BUS_TIMEOUT2_BCR 56
+#define GCC_PCNOC_BUS_TIMEOUT3_BCR 57
+#define GCC_PCNOC_BUS_TIMEOUT4_BCR 58
+#define GCC_PCNOC_BUS_TIMEOUT5_BCR 59
+#define GCC_PCNOC_BUS_TIMEOUT6_BCR 60
+#define GCC_PCNOC_BUS_TIMEOUT7_BCR 61
+#define GCC_PCNOC_BUS_TIMEOUT8_BCR 62
+#define GCC_PCNOC_BUS_TIMEOUT9_BCR 63
+#define GCC_UNIPHY0_BCR 64
+#define GCC_UNIPHY1_BCR 65
+#define GCC_UNIPHY2_BCR 66
+#define GCC_CMN_12GPLL_BCR 67
+#define GCC_QPIC_BCR 68
+#define GCC_MDIO_BCR 69
+#define GCC_PCIE1_TBU_BCR 70
+#define GCC_WCSS_CORE_TBU_BCR 71
+#define GCC_WCSS_Q6_TBU_BCR 72
+#define GCC_USB0_TBU_BCR 73
+#define GCC_USB1_TBU_BCR 74
+#define GCC_PCIE0_TBU_BCR 75
+#define GCC_NSS_NOC_TBU_BCR 76
+#define GCC_PCIE0_BCR 77
+#define GCC_PCIE0_PHY_BCR 78
+#define GCC_PCIE0PHY_PHY_BCR 79
+#define GCC_PCIE0_LINK_DOWN_BCR 80
+#define GCC_PCIE1_BCR 81
+#define GCC_PCIE1_PHY_BCR 82
+#define GCC_PCIE1PHY_PHY_BCR 83
+#define GCC_PCIE1_LINK_DOWN_BCR 84
+#define GCC_DCC_BCR 85
+#define GCC_APC0_VOLTAGE_DROOP_DETECTOR_BCR 86
+#define GCC_APC1_VOLTAGE_DROOP_DETECTOR_BCR 87
+#define GCC_SMMU_CATS_BCR 88
+
+#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On 04/28, Varadarajan Narayanan wrote:
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> new file mode 100644
> index 0000000..c150bea
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -0,0 +1,48 @@
> +/dts-v1/;
> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include "ipq8074.dtsi"
> +
> +/ {
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> + compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
> + interrupt-parent = <&intc>;
> +
> + chosen {
> + bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please.
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x0 0x20000000>;
> + };
> +
> + soc: soc {
Do you need the soc label here? Please remove.
> + pinctrl@1000000 {
> + serial_4_pins: serial4_pinmux {
> + mux {
> + pins = "gpio23", "gpio24";
> + function = "blsp4_uart1";
> + bias-disable;
> + };
> + };
> + };
> +
> + serial@78b3000 {
> + pinctrl-0 = <&serial_4_pins>;
> + pinctrl-names = "default";
> + status = "ok";
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> new file mode 100644
> index 0000000..f910cc0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -0,0 +1,153 @@
> +/*
> + * Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. IPQ8074";
> + compatible = "qcom,ipq8074";
> +
> + soc: soc {
> + #address-cells = <0x1>;
> + #size-cells = <0x1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + pinctrl@1000000 {
> + compatible = "qcom,ipq8074-pinctrl";
> + reg = <0x1000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <0x3>;
> + reg = <0xb000000 0x1000>,
> + <0xb002000 0x1000>;
Please align this up with previous reg property.
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> + };
Is there an mmio timer as well? We should add it too.
> +
> + gcc: gcc@1800000 {
> + compatible = "qcom,gcc-ipq8074";
> + reg = <0x1800000 0x80000>;
Wow that is a huge area! Is it really that large?
> + #clock-cells = <0x1>;
> + #reset-cells = <0x1>;
> + };
> +
> + serial@78b3000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x78b3000 0x200>;
> + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + status = "disabled";
> + };
> + };
> +
> + cpus {
> + #address-cells = <0x1>;
> + #size-cells = <0x0>;
> +
> + cpu-map {
> +
> + cluster0 {
> +
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
Is this needed? Looks ok, but just curious if we need to do it
for other arm64 platforms we support.
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x1>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + enable-method = "psci";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
This should be inside some CPU? CPU0?
> + };
We should be able to add the performance monitor node too?
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + clocks {
> + sleep_clk: sleep_clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
Not 32765 or 32768?
> + #clock-cells = <0>;
> + };
> +
> + xo: xo {
> + compatible = "fixed-clock";
> + clock-frequency = <19200000>;
> + #clock-cells = <0>;
> + };
> + };
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi,
On Fri, Apr 28, 2017 at 03:26:42PM +0530, Varadarajan Narayanan wrote:
> Subject: [PATCH 4/5] arm64: dts: Add ipq8074 SoC and MTP board support
s/MTP/HK01/ ?
> Add initial device tree support for the Qualcomm IPQ8074 SoC and
> HK01 evaluation board.
>
> Signed-off-by: Manoharan Vijaya Raghavan <[email protected]>
> Signed-off-by: Abhishek Sahu <[email protected]>
> Signed-off-by: Varadarajan Narayanan <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 48 ++++++++++
> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 153 ++++++++++++++++++++++++++++++
> 3 files changed, 202 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index cc0f02d..7c6963e 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
Maybe this list should be alphabetically sorted ('i' before 'm').
(I have no strong preference)
Thanks,
Jonathan Neuschäfer
Hi Abhishek,
[auto build test WARNING on robh/for-next]
[also build test WARNING on v4.11-rc8 next-20170428]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Varadarajan-Narayanan/Add-minimal-boot-support-for-IPQ8074/20170429-130315
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
coccinelle warnings: (new ones prefixed by >>)
>> drivers/clk/qcom/gcc-ipq8074.c:1014:3-8: No need to set .owner here. The core will do it.
Please review and possibly fold the followup patch.
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
drivers/clk/qcom/gcc-ipq8074.c:1014:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
CC: Abhishek Sahu <[email protected]>
Signed-off-by: Fengguang Wu <[email protected]>
---
gcc-ipq8074.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -1011,7 +1011,6 @@ static struct platform_driver gcc_ipq807
.probe = gcc_ipq8074_probe,
.driver = {
.name = "qcom,gcc-ipq8074",
- .owner = THIS_MODULE,
.of_match_table = gcc_ipq8074_match_table,
},
};