Add files to enable/disable Aspeed watchdog:
* External signal after timeout
* Reset system after timeout
Signed-off-by: Christopher Bostic <[email protected]>
---
.../ABI/testing/sysfs-platform-aspeed-wdt | 40 +++++++++++
drivers/watchdog/aspeed_wdt.c | 79 +++++++++++++++++++++-
2 files changed, 118 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-aspeed-wdt
diff --git a/Documentation/ABI/testing/sysfs-platform-aspeed-wdt b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
new file mode 100644
index 0000000..a582176
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
@@ -0,0 +1,40 @@
+What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
+ reset_system
+Date: May 2017
+KernelVersion: 4.12
+Contact: Christopher Bostic <[email protected]>
+Description:
+ Value indicates if a watchdog time out results in a reset of
+ system. 'off': no system reset on timeout. 'on' there will
+ be a system reset on timeout.
+
+ Default: off
+
+ - Enable 'reset system' on watchdog timeout:
+ echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
+ watchdog0/reset_system;
+
+ - Disable 'reset system' on watchdog timeout:
+ echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
+ watchdog0/reset_system;
+
+What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
+ ext_signal
+Date: May 2017
+KernelVersion: 4.12
+Contact: Christopher Bostic <[email protected]>
+Description:
+ Value indicates if a watchdog time out results in an active
+ high pulse sent out an output pin. 'off': No output pulse
+ generated on watchdog time out. 'on': output pulse
+ generated on watchdog time out.
+
+ Default: off
+
+ - Enable 'external signal' on watchdog timeout:
+ echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
+ watchdog0/ext_signal;
+
+ - Disable 'external signal' on watchdog timeout:
+ echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
+ watchdog0/ext_signal;
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 1c65258..66b27e8 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -136,6 +136,83 @@ static int aspeed_wdt_restart(struct watchdog_device *wdd,
.identity = KBUILD_MODNAME,
};
+static ssize_t aspeed_wdt_cntl_get_state(struct device *dev, char *buf,
+ uint32_t mask)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
+ int ret;
+
+ if (readl(wdt->base + WDT_CTRL) & mask)
+ ret = sprintf(buf, "on\n");
+ else
+ ret = sprintf(buf, "off\n");
+
+ return ret;
+}
+
+static ssize_t aspeed_wdt_cntl_set_state(struct device *dev, const char *buf,
+ size_t count, uint32_t mask)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
+
+ if (!strncmp(buf, "on", strlen("on"))) {
+ wdt->ctrl |= mask;
+ writel(wdt->ctrl, wdt->base + WDT_CTRL);
+ } else if (!strncmp(buf, "off", strlen("off"))) {
+ wdt->ctrl &= ~mask;
+ writel(wdt->ctrl, wdt->base + WDT_CTRL);
+ } else {
+ dev_warn(dev, "Unknown reset system mode command: [%s]\n", buf);
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t aspeed_wdt_reset_system_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return aspeed_wdt_cntl_set_state(dev, buf, count,
+ WDT_CTRL_RESET_SYSTEM);
+}
+
+static ssize_t aspeed_wdt_reset_system_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_RESET_SYSTEM);
+}
+
+static DEVICE_ATTR(reset_system, 0644,
+ aspeed_wdt_reset_system_show, aspeed_wdt_reset_system_store);
+
+static ssize_t aspeed_wdt_ext_signal_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return aspeed_wdt_cntl_set_state(dev, buf, count, WDT_CTRL_WDT_EXT);
+}
+
+static ssize_t aspeed_wdt_ext_signal_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_WDT_EXT);
+}
+
+static DEVICE_ATTR(ext_signal, 0644,
+ aspeed_wdt_ext_signal_show, aspeed_wdt_ext_signal_store);
+
+static struct attribute *aspeed_wdt_attrs[] = {
+ &dev_attr_reset_system.attr,
+ &dev_attr_ext_signal.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(aspeed_wdt);
+
static int aspeed_wdt_probe(struct platform_device *pdev)
{
struct aspeed_wdt *wdt;
@@ -160,7 +237,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
wdt->wdd.ops = &aspeed_wdt_ops;
wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
wdt->wdd.parent = &pdev->dev;
-
+ wdt->wdd.groups = aspeed_wdt_groups;
wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
--
1.8.2.2
On Thu, Jun 01, 2017 at 04:35:21PM -0500, Christopher Bostic wrote:
> Add files to enable/disable Aspeed watchdog:
> * External signal after timeout
> * Reset system after timeout
>
The subject line is heavily misleading.
> Signed-off-by: Christopher Bostic <[email protected]>
> ---
> .../ABI/testing/sysfs-platform-aspeed-wdt | 40 +++++++++++
> drivers/watchdog/aspeed_wdt.c | 79 +++++++++++++++++++++-
> 2 files changed, 118 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/ABI/testing/sysfs-platform-aspeed-wdt
>
> diff --git a/Documentation/ABI/testing/sysfs-platform-aspeed-wdt b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
> new file mode 100644
> index 0000000..a582176
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
> @@ -0,0 +1,40 @@
> +What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
> + reset_system
> +Date: May 2017
> +KernelVersion: 4.12
> +Contact: Christopher Bostic <[email protected]>
> +Description:
> + Value indicates if a watchdog time out results in a reset of
> + system. 'off': no system reset on timeout. 'on' there will
> + be a system reset on timeout.
> +
> + Default: off
> +
> + - Enable 'reset system' on watchdog timeout:
> + echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
> + watchdog0/reset_system;
> +
> + - Disable 'reset system' on watchdog timeout:
> + echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
> + watchdog0/reset_system;
> +
> +What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
> + ext_signal
> +Date: May 2017
> +KernelVersion: 4.12
> +Contact: Christopher Bostic <[email protected]>
> +Description:
> + Value indicates if a watchdog time out results in an active
> + high pulse sent out an output pin. 'off': No output pulse
> + generated on watchdog time out. 'on': output pulse
> + generated on watchdog time out.
> +
> + Default: off
> +
> + - Enable 'external signal' on watchdog timeout:
> + echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
> + watchdog0/ext_signal;
> +
> + - Disable 'external signal' on watchdog timeout:
> + echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
> + watchdog0/ext_signal;
I'll want to see some discussion on those, both for the values written (on/off
vs. 0/1) and the action to be taken. Both seem to be system parameters rather
than something to set from user space. Also, there is no explanation what else
the watchdog should do on timeout if not to reset the system. If it doesn't do
anything, why run it in the first place ?
Also, specifying absolute path names seems wrong. There is no real guarantee
that the device is always watchdog0, that the path always includes
"1e785000.wdt", or that the path name will always start with
/sys/bus/platform/devices.
Thanks,
Guenter
> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
> index 1c65258..66b27e8 100644
> --- a/drivers/watchdog/aspeed_wdt.c
> +++ b/drivers/watchdog/aspeed_wdt.c
> @@ -136,6 +136,83 @@ static int aspeed_wdt_restart(struct watchdog_device *wdd,
> .identity = KBUILD_MODNAME,
> };
>
> +static ssize_t aspeed_wdt_cntl_get_state(struct device *dev, char *buf,
> + uint32_t mask)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
> + int ret;
> +
> + if (readl(wdt->base + WDT_CTRL) & mask)
> + ret = sprintf(buf, "on\n");
> + else
> + ret = sprintf(buf, "off\n");
> +
> + return ret;
> +}
> +
> +static ssize_t aspeed_wdt_cntl_set_state(struct device *dev, const char *buf,
> + size_t count, uint32_t mask)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
> +
> + if (!strncmp(buf, "on", strlen("on"))) {
> + wdt->ctrl |= mask;
> + writel(wdt->ctrl, wdt->base + WDT_CTRL);
> + } else if (!strncmp(buf, "off", strlen("off"))) {
> + wdt->ctrl &= ~mask;
> + writel(wdt->ctrl, wdt->base + WDT_CTRL);
> + } else {
> + dev_warn(dev, "Unknown reset system mode command: [%s]\n", buf);
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +
> +static ssize_t aspeed_wdt_reset_system_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + return aspeed_wdt_cntl_set_state(dev, buf, count,
> + WDT_CTRL_RESET_SYSTEM);
> +}
> +
> +static ssize_t aspeed_wdt_reset_system_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_RESET_SYSTEM);
> +}
> +
> +static DEVICE_ATTR(reset_system, 0644,
> + aspeed_wdt_reset_system_show, aspeed_wdt_reset_system_store);
> +
> +static ssize_t aspeed_wdt_ext_signal_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + return aspeed_wdt_cntl_set_state(dev, buf, count, WDT_CTRL_WDT_EXT);
> +}
> +
> +static ssize_t aspeed_wdt_ext_signal_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_WDT_EXT);
> +}
> +
> +static DEVICE_ATTR(ext_signal, 0644,
> + aspeed_wdt_ext_signal_show, aspeed_wdt_ext_signal_store);
> +
> +static struct attribute *aspeed_wdt_attrs[] = {
> + &dev_attr_reset_system.attr,
> + &dev_attr_ext_signal.attr,
> + NULL
> +};
> +ATTRIBUTE_GROUPS(aspeed_wdt);
> +
> static int aspeed_wdt_probe(struct platform_device *pdev)
> {
> struct aspeed_wdt *wdt;
> @@ -160,7 +237,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
> wdt->wdd.ops = &aspeed_wdt_ops;
> wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
> wdt->wdd.parent = &pdev->dev;
> -
> + wdt->wdd.groups = aspeed_wdt_groups;
> wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
> watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
>
> --
> 1.8.2.2
>
On 6/1/17 5:03 PM, Guenter Roeck wrote:
> On Thu, Jun 01, 2017 at 04:35:21PM -0500, Christopher Bostic wrote:
>> Add files to enable/disable Aspeed watchdog:
>> * External signal after timeout
>> * Reset system after timeout
>>
> The subject line is heavily misleading.
>
>> Signed-off-by: Christopher Bostic <[email protected]>
>> ---
>> .../ABI/testing/sysfs-platform-aspeed-wdt | 40 +++++++++++
>> drivers/watchdog/aspeed_wdt.c | 79 +++++++++++++++++++++-
>> 2 files changed, 118 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/ABI/testing/sysfs-platform-aspeed-wdt
>>
>> diff --git a/Documentation/ABI/testing/sysfs-platform-aspeed-wdt b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
>> new file mode 100644
>> index 0000000..a582176
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-platform-aspeed-wdt
>> @@ -0,0 +1,40 @@
>> +What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
>> + reset_system
>> +Date: May 2017
>> +KernelVersion: 4.12
>> +Contact: Christopher Bostic <[email protected]>
>> +Description:
>> + Value indicates if a watchdog time out results in a reset of
>> + system. 'off': no system reset on timeout. 'on' there will
>> + be a system reset on timeout.
>> +
>> + Default: off
>> +
>> + - Enable 'reset system' on watchdog timeout:
>> + echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
>> + watchdog0/reset_system;
>> +
>> + - Disable 'reset system' on watchdog timeout:
>> + echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
>> + watchdog0/reset_system;
>> +
>> +What: /sys/bus/platform/devices/1e785000.wdt/watchdog/watchdog0/
>> + ext_signal
>> +Date: May 2017
>> +KernelVersion: 4.12
>> +Contact: Christopher Bostic <[email protected]>
>> +Description:
>> + Value indicates if a watchdog time out results in an active
>> + high pulse sent out an output pin. 'off': No output pulse
>> + generated on watchdog time out. 'on': output pulse
>> + generated on watchdog time out.
>> +
>> + Default: off
>> +
>> + - Enable 'external signal' on watchdog timeout:
>> + echo on > /sys/bus/platform/devices/1e785000.wdt/watchdog/
>> + watchdog0/ext_signal;
>> +
>> + - Disable 'external signal' on watchdog timeout:
>> + echo off > /sys/bus/platform/devices/1e785000.wdt/watchdog/
>> + watchdog0/ext_signal;
> I'll want to see some discussion on those, both for the values written (on/off
> vs. 0/1) and the action to be taken. Both seem to be system parameters rather
> than something to set from user space. Also, there is no explanation what else
> the watchdog should do on timeout if not to reset the system. If it doesn't do
> anything, why run it in the first place ?
Hi Guenter,
I'll be resubmitting with a change to remove the sysfs files and instead
add a device tree attribute
that will be specific to the system affected.
Thanks
Chris
> Also, specifying absolute path names seems wrong. There is no real guarantee
> that the device is always watchdog0, that the path always includes
> "1e785000.wdt", or that the path name will always start with
> /sys/bus/platform/devices.
>
> Thanks,
> Guenter
>
>> diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
>> index 1c65258..66b27e8 100644
>> --- a/drivers/watchdog/aspeed_wdt.c
>> +++ b/drivers/watchdog/aspeed_wdt.c
>> @@ -136,6 +136,83 @@ static int aspeed_wdt_restart(struct watchdog_device *wdd,
>> .identity = KBUILD_MODNAME,
>> };
>>
>> +static ssize_t aspeed_wdt_cntl_get_state(struct device *dev, char *buf,
>> + uint32_t mask)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
>> + int ret;
>> +
>> + if (readl(wdt->base + WDT_CTRL) & mask)
>> + ret = sprintf(buf, "on\n");
>> + else
>> + ret = sprintf(buf, "off\n");
>> +
>> + return ret;
>> +}
>> +
>> +static ssize_t aspeed_wdt_cntl_set_state(struct device *dev, const char *buf,
>> + size_t count, uint32_t mask)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct aspeed_wdt *wdt = platform_get_drvdata(pdev);
>> +
>> + if (!strncmp(buf, "on", strlen("on"))) {
>> + wdt->ctrl |= mask;
>> + writel(wdt->ctrl, wdt->base + WDT_CTRL);
>> + } else if (!strncmp(buf, "off", strlen("off"))) {
>> + wdt->ctrl &= ~mask;
>> + writel(wdt->ctrl, wdt->base + WDT_CTRL);
>> + } else {
>> + dev_warn(dev, "Unknown reset system mode command: [%s]\n", buf);
>> + return -EINVAL;
>> + }
>> +
>> + return count;
>> +}
>> +
>> +static ssize_t aspeed_wdt_reset_system_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + return aspeed_wdt_cntl_set_state(dev, buf, count,
>> + WDT_CTRL_RESET_SYSTEM);
>> +}
>> +
>> +static ssize_t aspeed_wdt_reset_system_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_RESET_SYSTEM);
>> +}
>> +
>> +static DEVICE_ATTR(reset_system, 0644,
>> + aspeed_wdt_reset_system_show, aspeed_wdt_reset_system_store);
>> +
>> +static ssize_t aspeed_wdt_ext_signal_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf, size_t count)
>> +{
>> + return aspeed_wdt_cntl_set_state(dev, buf, count, WDT_CTRL_WDT_EXT);
>> +}
>> +
>> +static ssize_t aspeed_wdt_ext_signal_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + return aspeed_wdt_cntl_get_state(dev, buf, WDT_CTRL_WDT_EXT);
>> +}
>> +
>> +static DEVICE_ATTR(ext_signal, 0644,
>> + aspeed_wdt_ext_signal_show, aspeed_wdt_ext_signal_store);
>> +
>> +static struct attribute *aspeed_wdt_attrs[] = {
>> + &dev_attr_reset_system.attr,
>> + &dev_attr_ext_signal.attr,
>> + NULL
>> +};
>> +ATTRIBUTE_GROUPS(aspeed_wdt);
>> +
>> static int aspeed_wdt_probe(struct platform_device *pdev)
>> {
>> struct aspeed_wdt *wdt;
>> @@ -160,7 +237,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
>> wdt->wdd.ops = &aspeed_wdt_ops;
>> wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
>> wdt->wdd.parent = &pdev->dev;
>> -
>> + wdt->wdd.groups = aspeed_wdt_groups;
>> wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
>> watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
>>
>> --
>> 1.8.2.2
>>