This patchset adds driver for HiSilicon Hi6421v530 PMIC.
Mainline kernel already has driver support to a similar chip, Hi6421.
Hi6421 and Hi6421v530 are both from the same vendor, HiSilicon, but
they are at different revisions. They both use the same Memory-mapped
I/O method to communicate with Main SoC. However, they differ quite a
lot in their regulator designs. Eg. they have completely different LDO
voltage points.
Patch 1 and 2 extends hi6421-pmic-core.c to support Hi6421v530 revision.
Patch 3 add hi6421v530-regulator.c driver for LDO regulators.
Patch 4 fixes an issue for hi6421 regulator, which is not related to v530
but it's found in this review.
Patch 5 is dts change, it depends and can be applied on hi3660/hikey960
patchset [1].
Patch 6 enables the relevant config items.
[1], http://www.spinics.net/lists/devicetree/msg178303.html
Major changes in v3:
- in hi6421-pmic-core.c
* use shorter license script.
* arrange #include in alphabetical order.
* using recommended error log messages from Lee Jones.
- in hi6421v530-regulator.c
* remove unused #include files
* arrange remaining ones in alphabetical order.
Major changes in v2:
- instead of writing a new driver, extend hi6421-pmic-core.c
to support its v530 revision
- update hi6421v530-regulator.c to use modern regulator driver
design logics.
Guodong Xu (4):
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string
mfd: hi6421-pmic: add support for HiSilicon Hi6421v530
regulator: hi6421: Describe consumed platform device
arm64: defconfig: enable support hi6421v530 PMIC
Wang Xiaoyin (2):
regulator: hi6421v530: add driver for hi6421v530 voltage regulator
arm64: dts: hikey960: add device node for pmic and regulators
Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +-
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++
arch/arm64/configs/defconfig | 2 +
drivers/mfd/hi6421-pmic-core.c | 85 +++++----
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421-regulator.c | 7 +
drivers/regulator/hi6421v530-regulator.c | 207 ++++++++++++++++++++++
include/linux/mfd/hi6421-pmic.h | 5 +
9 files changed, 334 insertions(+), 33 deletions(-)
create mode 100644 drivers/regulator/hi6421v530-regulator.c
--
2.10.2
Add compatible string for HiSilicon Hi6421v530 PMIC.
Signed-off-by: Guodong Xu <[email protected]>
---
Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
index 0d5a446..22da96d 100644
--- a/Documentation/devicetree/bindings/mfd/hi6421.txt
+++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
@@ -1,7 +1,9 @@
* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
Required parent device properties:
-- compatible : contains "hisilicon,hi6421-pmic";
+- compatible : One of the following chip-specific strings:
+ "hisilicon,hi6421-pmic";
+ "hisilicon,hi6421v530-pmic";
- reg : register range space of hi6421;
Supported Hi6421 sub-devices include:
--
2.10.2
From: Wang Xiaoyin <[email protected]>
add the driver for hi6421v530 voltage regulator
Signed-off-by: Wang Xiaoyin <[email protected]>
Signed-off-by: Guodong Xu <[email protected]>
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v530-regulator.c | 207 +++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 drivers/regulator/hi6421v530-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 48db87d..78cd8d8 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -296,6 +296,16 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
+config REGULATOR_HI6421V530
+ tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
+ depends on MFD_HI6421_PMIC && OF
+ help
+ This driver provides support for the voltage regulators on
+ HiSilicon Hi6421v530 PMU / Codec IC.
+ Hi6421v530 is a multi-function device which, on regulator part,
+ provides 5 general purpose LDOs, and all of them come with support
+ to either ECO (idle) or sleep mode.
+
config REGULATOR_HI655X
tristate "Hisilicon HI655X PMIC regulators support"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index dc3503f..36e2b75 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c
new file mode 100644
index 0000000..46bbba9
--- /dev/null
+++ b/drivers/regulator/hi6421v530-regulator.c
@@ -0,0 +1,207 @@
+/*
+ * Device driver for regulators in Hi6421V530 IC
+ *
+ * Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2017> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Wang Xiaoyin <[email protected]>
+ * Guodong Xu <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/hi6421-pmic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * struct hi6421v530_regulator_info - hi6421v530 regulator information
+ * @desc: regulator description
+ * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
+ * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
+ */
+struct hi6421v530_regulator_info {
+ struct regulator_desc rdesc;
+ u8 mode_mask;
+ u32 eco_microamp;
+};
+
+/* HI6421v530 regulators */
+enum hi6421v530_regulator_id {
+ HI6421V530_LDO3,
+ HI6421V530_LDO9,
+ HI6421V530_LDO11,
+ HI6421V530_LDO15,
+ HI6421V530_LDO16,
+};
+
+static const unsigned int ldo_3_voltages[] = {
+ 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000,
+ 2000000, 2025000, 2050000, 2075000,
+ 2100000, 2125000, 2150000, 2200000,
+};
+
+static const unsigned int ldo_9_11_voltages[] = {
+ 1750000, 1800000, 1825000, 2800000,
+ 2850000, 2950000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_15_16_voltages[] = {
+ 1750000, 1800000, 2400000, 2600000,
+ 2700000, 2850000, 2950000, 3000000,
+};
+
+static const struct regulator_ops hi6421v530_ldo_ops;
+
+#define HI6421V530_LDO_ENABLE_TIME (350)
+
+/*
+ * _id - LDO id name string
+ * v_table - voltage table
+ * vreg - voltage select register
+ * vmask - voltage select mask
+ * ereg - enable register
+ * emask - enable mask
+ * odelay - off/on delay time in uS
+ * ecomask - eco mode mask
+ * ecoamp - eco mode load uppler limit in uA
+ */
+#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \
+ odelay, ecomask, ecoamp) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &hi6421v530_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI6421V530_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(v_table), \
+ .volt_table = v_table, \
+ .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
+ .enable_mask = emask, \
+ .enable_time = HI6421V530_LDO_ENABLE_TIME, \
+ .off_on_delay = odelay, \
+ }, \
+ .mode_mask = ecomask, \
+ .eco_microamp = ecoamp, \
+}
+
+/* HI6421V530 regulator information */
+
+static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = {
+ HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2,
+ 20000, 0x6, 8000),
+ HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2,
+ 40000, 0x6, 8000),
+};
+
+static unsigned int hi6421v530_regulator_ldo_get_mode(
+ struct regulator_dev *rdev)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int reg_val;
+
+ info = rdev_get_drvdata(rdev);
+ regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val);
+
+ if (reg_val & (info->mode_mask))
+ return REGULATOR_MODE_IDLE;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int new_mode;
+
+ info = rdev_get_drvdata(rdev);
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ new_mode = 0;
+ break;
+ case REGULATOR_MODE_IDLE:
+ new_mode = info->mode_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ info->mode_mask, new_mode);
+
+ return 0;
+}
+
+
+static const struct regulator_ops hi6421v530_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_mode = hi6421v530_regulator_ldo_get_mode,
+ .set_mode = hi6421v530_regulator_ldo_set_mode,
+};
+
+static int hi6421v530_regulator_probe(struct platform_device *pdev)
+{
+ struct hi6421_pmic *pmic;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+ unsigned int i;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) {
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+ config.driver_data = &hi6421v530_regulator_info[i];
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &hi6421v530_regulator_info[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ hi6421v530_regulator_info[i].rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi6421v530_regulator_driver = {
+ .driver = {
+ .name = "hi6421v530-regulator",
+ },
+ .probe = hi6421v530_regulator_probe,
+};
+module_platform_driver(hi6421v530_regulator_driver);
+
+MODULE_AUTHOR("Wang Xiaoyin <[email protected]>");
+MODULE_DESCRIPTION("Hi6421v530 regulator driver");
+MODULE_LICENSE("GPL v2");
--
2.10.2
Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with
main SoC via memory-mapped I/O.
Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon,
but at different revisions. They share the same memory-mapped I/O
design. They differ in integrated devices, such as regulator details,
LDO voltage points.
Also, changed license to a shorter form, and arranged all #include in
alphabetical order.
Signed-off-by: Wang Xiaoyin <[email protected]>
Signed-off-by: Guodong Xu <[email protected]>
---
drivers/mfd/hi6421-pmic-core.c | 85 +++++++++++++++++++++++++----------------
include/linux/mfd/hi6421-pmic.h | 5 +++
2 files changed, 58 insertions(+), 32 deletions(-)
diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c
index 3fd703f..b914541 100644
--- a/drivers/mfd/hi6421-pmic-core.c
+++ b/drivers/mfd/hi6421-pmic-core.c
@@ -1,40 +1,35 @@
/*
- * Device driver for Hi6421 IC
+ * Device driver for Hi6421 PMIC
*
* Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
* http://www.hisilicon.com
- * Copyright (c) <2013-2014> Linaro Ltd.
+ * Copyright (c) <2013-2017> Linaro Ltd.
* http://www.linaro.org
*
* Author: Guodong Xu <[email protected]>
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-pmic.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
-#include <linux/mfd/hi6421-pmic.h>
static const struct mfd_cell hi6421_devs[] = {
{ .name = "hi6421-regulator", },
};
+static const struct mfd_cell hi6421v530_devs[] = {
+ { .name = "hi6421v530-regulator", },
+};
+
static const struct regmap_config hi6421_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -42,12 +37,30 @@ static const struct regmap_config hi6421_regmap_config = {
.max_register = HI6421_REG_TO_BUS_ADDR(HI6421_REG_MAX),
};
+static const struct of_device_id of_hi6421_pmic_match[] = {
+ { .compatible = "hisilicon,hi6421-pmic",
+ .data = (void *)HI6421 },
+ { .compatible = "hisilicon,hi6421v530-pmic",
+ .data = (void *)HI6421_V530 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);
+
static int hi6421_pmic_probe(struct platform_device *pdev)
{
struct hi6421_pmic *pmic;
struct resource *res;
void __iomem *base;
- int ret;
+ const struct of_device_id *id;
+ unsigned long type;
+ const struct mfd_cell *subdevs = NULL;
+ int n_subdevs, ret;
+
+ id = of_match_device(of_hi6421_pmic_match, &pdev->dev);
+ if (id)
+ type = (unsigned long)id->data;
+ else
+ return -EINVAL;
pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
@@ -61,41 +74,49 @@ static int hi6421_pmic_probe(struct platform_device *pdev)
pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
&hi6421_regmap_config);
if (IS_ERR(pmic->regmap)) {
- dev_err(&pdev->dev,
- "regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
+ dev_err(&pdev->dev, "Failed to initialise Regmap: %ld\n",
+ PTR_ERR(pmic->regmap));
return PTR_ERR(pmic->regmap);
}
- /* set over-current protection debounce 8ms */
- regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
+ platform_set_drvdata(pdev, pmic);
+
+ switch (type) {
+ case HI6421:
+ /* set over-current protection debounce 8ms */
+ regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
(HI6421_OCP_DEB_SEL_MASK
| HI6421_OCP_EN_DEBOUNCE_MASK
| HI6421_OCP_AUTO_STOP_MASK),
(HI6421_OCP_DEB_SEL_8MS
| HI6421_OCP_EN_DEBOUNCE_ENABLE));
- platform_set_drvdata(pdev, pmic);
+ subdevs = hi6421_devs;
+ n_subdevs = ARRAY_SIZE(hi6421_devs);
+ break;
+ case HI6421_V530:
+ subdevs = hi6421v530_devs;
+ n_subdevs = ARRAY_SIZE(hi6421v530_devs);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown device type %ld\n", type);
+ return -EINVAL;
+ }
- ret = devm_mfd_add_devices(&pdev->dev, 0, hi6421_devs,
- ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
+ ret = devm_mfd_add_devices(&pdev->dev, 0, subdevs,
+ n_subdevs, NULL, 0, NULL);
if (ret) {
- dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
+ dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
return ret;
}
return 0;
}
-static const struct of_device_id of_hi6421_pmic_match_tbl[] = {
- { .compatible = "hisilicon,hi6421-pmic", },
- { },
-};
-MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match_tbl);
-
static struct platform_driver hi6421_pmic_driver = {
.driver = {
- .name = "hi6421_pmic",
- .of_match_table = of_hi6421_pmic_match_tbl,
+ .name = "hi6421_pmic",
+ .of_match_table = of_hi6421_pmic_match,
},
.probe = hi6421_pmic_probe,
};
diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h
index 587273e..2457438 100644
--- a/include/linux/mfd/hi6421-pmic.h
+++ b/include/linux/mfd/hi6421-pmic.h
@@ -38,4 +38,9 @@ struct hi6421_pmic {
struct regmap *regmap;
};
+enum hi6421_type {
+ HI6421 = 1,
+ HI6421_V530 = 2,
+};
+
#endif /* __HI6421_PMIC_H */
--
2.10.2
The hi6421-regulator driver consumes a similarly named platform device.
Adding that to the module device table, allows modprobe to locate this
driver once the device is created.
Cc: Jeremy Linton <[email protected]>
Cc: Mark Brown <[email protected]>
Signed-off-by: Guodong Xu <[email protected]>
---
drivers/regulator/hi6421-regulator.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 62c5f54..259c3a8 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -621,7 +621,14 @@ static int hi6421_regulator_probe(struct platform_device *pdev)
return 0;
}
+static const struct platform_device_id hi6421_regulator_table[] = {
+ { .name = "hi6421-regulator" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);
+
static struct platform_driver hi6421_regulator_driver = {
+ .id_table = hi6421_regulator_table,
.driver = {
.name = "hi6421-regulator",
},
--
2.10.2
Enable configs for hi6421v530 mfd and regulator driver
+ CONFIG_MFD_HI6421_PMIC=y
+ CONFIG_REGULATOR_HI6421V530=y
Signed-off-by: Guodong Xu <[email protected]>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ce07285..867d68c 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -305,6 +305,7 @@ CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_MESON_WATCHDOG=m
CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SPMI_PMIC=y
@@ -315,6 +316,7 @@ CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI6421V530=y
CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
--
2.10.2
From: Wang Xiaoyin <[email protected]>
add device node for hi6421 pmic core and hi6421v530
voltage regulator,include LDO(1,3,9,11,15,16)
Signed-off-by: Wang Xiaoyin <[email protected]>
Signed-off-by: Guodong Xu <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 46 +++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index ca448f0..9da8375 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -97,6 +97,52 @@
default-state = "off";
};
};
+
+ pmic: pmic@fff34000 {
+ compatible = "hisilicon,hi6421v530-pmic";
+ reg = <0x0 0xfff34000 0x0 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "VOUT3_1V85";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "VOUT9_1V8/2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo11: LDO11 { /* Low Speed Connector */
+ regulator-name = "VOUT11_1V8/2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+
+ ldo15: LDO15 { /* UFS VCC */
+ regulator-name = "VOUT15_3V0";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <120>;
+ };
+
+ ldo16: LDO16 { /* SD VDD */
+ regulator-name = "VOUT16_2V95";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <360>;
+ };
+ };
+ };
};
&i2c0 {
--
2.10.2
On Fri, 02 Jun 2017, Guodong Xu wrote:
> Add compatible string for HiSilicon Hi6421v530 PMIC.
>
> Signed-off-by: Guodong Xu <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
For my own reference:
Acked-for-MFD-by: Lee Jones <[email protected]>
> diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
> index 0d5a446..22da96d 100644
> --- a/Documentation/devicetree/bindings/mfd/hi6421.txt
> +++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
> @@ -1,7 +1,9 @@
> * HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
>
> Required parent device properties:
> -- compatible : contains "hisilicon,hi6421-pmic";
> +- compatible : One of the following chip-specific strings:
> + "hisilicon,hi6421-pmic";
> + "hisilicon,hi6421v530-pmic";
> - reg : register range space of hi6421;
>
> Supported Hi6421 sub-devices include:
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Fri, 02 Jun 2017, Guodong Xu wrote:
> Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with
> main SoC via memory-mapped I/O.
>
> Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon,
> but at different revisions. They share the same memory-mapped I/O
> design. They differ in integrated devices, such as regulator details,
> LDO voltage points.
>
> Also, changed license to a shorter form, and arranged all #include in
> alphabetical order.
>
> Signed-off-by: Wang Xiaoyin <[email protected]>
> Signed-off-by: Guodong Xu <[email protected]>
> ---
> drivers/mfd/hi6421-pmic-core.c | 85 +++++++++++++++++++++++++----------------
> include/linux/mfd/hi6421-pmic.h | 5 +++
> 2 files changed, 58 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c
> index 3fd703f..b914541 100644
> --- a/drivers/mfd/hi6421-pmic-core.c
> +++ b/drivers/mfd/hi6421-pmic-core.c
> @@ -1,40 +1,35 @@
> /*
> - * Device driver for Hi6421 IC
> + * Device driver for Hi6421 PMIC
> *
> * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
> * http://www.hisilicon.com
> - * Copyright (c) <2013-2014> Linaro Ltd.
> + * Copyright (c) <2013-2017> Linaro Ltd.
> * http://www.linaro.org
> *
> * Author: Guodong Xu <[email protected]>
> *
> * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope it will be useful, but WITHOUT
> - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> - * more details.
> - *
> - * You should have received a copy of the GNU General Public License
> - * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
Nice change, but this should be a separate patch.
> */
>
> #include <linux/device.h>
> #include <linux/err.h>
> #include <linux/mfd/core.h>
> +#include <linux/mfd/hi6421-pmic.h>
> #include <linux/module.h>
> -#include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> -#include <linux/mfd/hi6421-pmic.h>
>
> static const struct mfd_cell hi6421_devs[] = {
> { .name = "hi6421-regulator", },
> };
>
> +static const struct mfd_cell hi6421v530_devs[] = {
> + { .name = "hi6421v530-regulator", },
> +};
> +
> static const struct regmap_config hi6421_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> @@ -42,12 +37,30 @@ static const struct regmap_config hi6421_regmap_config = {
> .max_register = HI6421_REG_TO_BUS_ADDR(HI6421_REG_MAX),
> };
>
> +static const struct of_device_id of_hi6421_pmic_match[] = {
> + { .compatible = "hisilicon,hi6421-pmic",
> + .data = (void *)HI6421 },
> + { .compatible = "hisilicon,hi6421v530-pmic",
> + .data = (void *)HI6421_V530 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);
This formatting is odd. If both attributes won't fit on a single
line, please place them on completely separate lines. This includes
the braces. Something like this:
{
.compatible = "hisilicon,hi6421-pmic",
.data = (void *)HI6421
}, {
.compatible = "hisilicon,hi6421v530-pmic",
.data = (void *)HI6421_V530 },
{ },
> static int hi6421_pmic_probe(struct platform_device *pdev)
> {
> struct hi6421_pmic *pmic;
> struct resource *res;
> void __iomem *base;
> - int ret;
> + const struct of_device_id *id;
> + unsigned long type;
> + const struct mfd_cell *subdevs = NULL;
> + int n_subdevs, ret;
Better to reorganise this a little. I tend to have the complex data
types at the top running down to simple 'int' types at the bottom.
> + id = of_match_device(of_hi6421_pmic_match, &pdev->dev);
> + if (id)
> + type = (unsigned long)id->data;
> + else
> + return -EINVAL;
Place "!id" in the if statement, then you can drop the else.
> pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
> if (!pmic)
> @@ -61,41 +74,49 @@ static int hi6421_pmic_probe(struct platform_device *pdev)
> pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
> &hi6421_regmap_config);
> if (IS_ERR(pmic->regmap)) {
> - dev_err(&pdev->dev,
> - "regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
> + dev_err(&pdev->dev, "Failed to initialise Regmap: %ld\n",
> + PTR_ERR(pmic->regmap));
Separate patch.
> return PTR_ERR(pmic->regmap);
> }
>
> - /* set over-current protection debounce 8ms */
> - regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
> + platform_set_drvdata(pdev, pmic);
> +
> + switch (type) {
> + case HI6421:
> + /* set over-current protection debounce 8ms */
> + regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
> (HI6421_OCP_DEB_SEL_MASK
> | HI6421_OCP_EN_DEBOUNCE_MASK
> | HI6421_OCP_AUTO_STOP_MASK),
> (HI6421_OCP_DEB_SEL_8MS
> | HI6421_OCP_EN_DEBOUNCE_ENABLE));
>
> - platform_set_drvdata(pdev, pmic);
> + subdevs = hi6421_devs;
> + n_subdevs = ARRAY_SIZE(hi6421_devs);
> + break;
> + case HI6421_V530:
> + subdevs = hi6421v530_devs;
> + n_subdevs = ARRAY_SIZE(hi6421v530_devs);
> + break;
> + default:
> + dev_err(&pdev->dev, "Unknown device type %ld\n", type);
> + return -EINVAL;
> + }
>
> - ret = devm_mfd_add_devices(&pdev->dev, 0, hi6421_devs,
> - ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
> + ret = devm_mfd_add_devices(&pdev->dev, 0, subdevs,
Use the proper defines, not '0'.
> + n_subdevs, NULL, 0, NULL);
> if (ret) {
> - dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
> + dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
This needs to be grouped with the other error message change above.
> return ret;
> }
>
> return 0;
> }
>
> -static const struct of_device_id of_hi6421_pmic_match_tbl[] = {
> - { .compatible = "hisilicon,hi6421-pmic", },
> - { },
> -};
> -MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match_tbl);
> -
> static struct platform_driver hi6421_pmic_driver = {
> .driver = {
> - .name = "hi6421_pmic",
> - .of_match_table = of_hi6421_pmic_match_tbl,
> + .name = "hi6421_pmic",
> + .of_match_table = of_hi6421_pmic_match,
> },
> .probe = hi6421_pmic_probe,
> };
> diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h
> index 587273e..2457438 100644
> --- a/include/linux/mfd/hi6421-pmic.h
> +++ b/include/linux/mfd/hi6421-pmic.h
> @@ -38,4 +38,9 @@ struct hi6421_pmic {
> struct regmap *regmap;
> };
>
> +enum hi6421_type {
> + HI6421 = 1,
> + HI6421_V530 = 2,
Why 1 and 2?
> +};
> +
> #endif /* __HI6421_PMIC_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Mon, Jun 5, 2017 at 4:14 PM, Lee Jones <[email protected]> wrote:
> On Fri, 02 Jun 2017, Guodong Xu wrote:
>
>> Add compatible string for HiSilicon Hi6421v530 PMIC.
>>
>> Signed-off-by: Guodong Xu <[email protected]>
>> ---
>> Documentation/devicetree/bindings/mfd/hi6421.txt | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <[email protected]>
>
Thanks Lee.
>> diff --git a/Documentation/devicetree/bindings/mfd/hi6421.txt b/Documentation/devicetree/bindings/mfd/hi6421.txt
>> index 0d5a446..22da96d 100644
>> --- a/Documentation/devicetree/bindings/mfd/hi6421.txt
>> +++ b/Documentation/devicetree/bindings/mfd/hi6421.txt
>> @@ -1,7 +1,9 @@
>> * HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
>>
>> Required parent device properties:
>> -- compatible : contains "hisilicon,hi6421-pmic";
>> +- compatible : One of the following chip-specific strings:
>> + "hisilicon,hi6421-pmic";
>> + "hisilicon,hi6421v530-pmic";
>> - reg : register range space of hi6421;
>>
>> Supported Hi6421 sub-devices include:
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
On Mon, Jun 5, 2017 at 4:24 PM, Lee Jones <[email protected]> wrote:
> On Fri, 02 Jun 2017, Guodong Xu wrote:
>
>> Add support for HiSilicon Hi6421v530 PMIC. Hi6421v530 communicates with
>> main SoC via memory-mapped I/O.
>>
>> Hi6421v530 and Hi6421 are PMIC chips from the same vendor, HiSilicon,
>> but at different revisions. They share the same memory-mapped I/O
>> design. They differ in integrated devices, such as regulator details,
>> LDO voltage points.
>>
>> Also, changed license to a shorter form, and arranged all #include in
>> alphabetical order.
>>
>> Signed-off-by: Wang Xiaoyin <[email protected]>
>> Signed-off-by: Guodong Xu <[email protected]>
>> ---
>> drivers/mfd/hi6421-pmic-core.c | 85 +++++++++++++++++++++++++----------------
>> include/linux/mfd/hi6421-pmic.h | 5 +++
>> 2 files changed, 58 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/mfd/hi6421-pmic-core.c b/drivers/mfd/hi6421-pmic-core.c
>> index 3fd703f..b914541 100644
>> --- a/drivers/mfd/hi6421-pmic-core.c
>> +++ b/drivers/mfd/hi6421-pmic-core.c
>> @@ -1,40 +1,35 @@
>> /*
>> - * Device driver for Hi6421 IC
>> + * Device driver for Hi6421 PMIC
>> *
>> * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
>> * http://www.hisilicon.com
>> - * Copyright (c) <2013-2014> Linaro Ltd.
>> + * Copyright (c) <2013-2017> Linaro Ltd.
>> * http://www.linaro.org
>> *
>> * Author: Guodong Xu <[email protected]>
>> *
>> * This program is free software; you can redistribute it and/or modify
>> - * it under the terms of the GNU General Public License as published by
>> - * the Free Software Foundation; either version 2 of the License, or
>> - * (at your option) any later version.
>> - *
>> - * This program is distributed in the hope it will be useful, but WITHOUT
>> - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
>> - * more details.
>> - *
>> - * You should have received a copy of the GNU General Public License
>> - * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>
> Nice change, but this should be a separate patch.
>
I will add that as a separate patch.
>> */
>>
>> #include <linux/device.h>
>> #include <linux/err.h>
>> #include <linux/mfd/core.h>
>> +#include <linux/mfd/hi6421-pmic.h>
>> #include <linux/module.h>
>> -#include <linux/of.h>
>> +#include <linux/of_device.h>
>> #include <linux/platform_device.h>
>> #include <linux/regmap.h>
>> -#include <linux/mfd/hi6421-pmic.h>
>>
>> static const struct mfd_cell hi6421_devs[] = {
>> { .name = "hi6421-regulator", },
>> };
>>
>> +static const struct mfd_cell hi6421v530_devs[] = {
>> + { .name = "hi6421v530-regulator", },
>> +};
>> +
>> static const struct regmap_config hi6421_regmap_config = {
>> .reg_bits = 32,
>> .reg_stride = 4,
>> @@ -42,12 +37,30 @@ static const struct regmap_config hi6421_regmap_config = {
>> .max_register = HI6421_REG_TO_BUS_ADDR(HI6421_REG_MAX),
>> };
>>
>> +static const struct of_device_id of_hi6421_pmic_match[] = {
>> + { .compatible = "hisilicon,hi6421-pmic",
>> + .data = (void *)HI6421 },
>> + { .compatible = "hisilicon,hi6421v530-pmic",
>> + .data = (void *)HI6421_V530 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);
>
> This formatting is odd. If both attributes won't fit on a single
> line, please place them on completely separate lines. This includes
> the braces. Something like this:
>
> {
> .compatible = "hisilicon,hi6421-pmic",
> .data = (void *)HI6421
> }, {
> .compatible = "hisilicon,hi6421v530-pmic",
> .data = (void *)HI6421_V530 },
> { },
>
Thanks, I will change that.
>> static int hi6421_pmic_probe(struct platform_device *pdev)
>> {
>> struct hi6421_pmic *pmic;
>> struct resource *res;
>> void __iomem *base;
>> - int ret;
>> + const struct of_device_id *id;
>> + unsigned long type;
>> + const struct mfd_cell *subdevs = NULL;
>> + int n_subdevs, ret;
>
> Better to reorganise this a little. I tend to have the complex data
> types at the top running down to simple 'int' types at the bottom.
>
Sure. I will update.
>> + id = of_match_device(of_hi6421_pmic_match, &pdev->dev);
>> + if (id)
>> + type = (unsigned long)id->data;
>> + else
>> + return -EINVAL;
>
> Place "!id" in the if statement, then you can drop the else.
>
Thanks. I will update.
>> pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
>> if (!pmic)
>> @@ -61,41 +74,49 @@ static int hi6421_pmic_probe(struct platform_device *pdev)
>> pmic->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
>> &hi6421_regmap_config);
>> if (IS_ERR(pmic->regmap)) {
>> - dev_err(&pdev->dev,
>> - "regmap init failed: %ld\n", PTR_ERR(pmic->regmap));
>> + dev_err(&pdev->dev, "Failed to initialise Regmap: %ld\n",
>> + PTR_ERR(pmic->regmap));
>
> Separate patch.
>
I will do.
>> return PTR_ERR(pmic->regmap);
>> }
>>
>> - /* set over-current protection debounce 8ms */
>> - regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
>> + platform_set_drvdata(pdev, pmic);
>> +
>> + switch (type) {
>> + case HI6421:
>> + /* set over-current protection debounce 8ms */
>> + regmap_update_bits(pmic->regmap, HI6421_OCP_DEB_CTRL_REG,
>> (HI6421_OCP_DEB_SEL_MASK
>> | HI6421_OCP_EN_DEBOUNCE_MASK
>> | HI6421_OCP_AUTO_STOP_MASK),
>> (HI6421_OCP_DEB_SEL_8MS
>> | HI6421_OCP_EN_DEBOUNCE_ENABLE));
>>
>> - platform_set_drvdata(pdev, pmic);
>> + subdevs = hi6421_devs;
>> + n_subdevs = ARRAY_SIZE(hi6421_devs);
>> + break;
>> + case HI6421_V530:
>> + subdevs = hi6421v530_devs;
>> + n_subdevs = ARRAY_SIZE(hi6421v530_devs);
>> + break;
>> + default:
>> + dev_err(&pdev->dev, "Unknown device type %ld\n", type);
>> + return -EINVAL;
>> + }
>>
>> - ret = devm_mfd_add_devices(&pdev->dev, 0, hi6421_devs,
>> - ARRAY_SIZE(hi6421_devs), NULL, 0, NULL);
>> + ret = devm_mfd_add_devices(&pdev->dev, 0, subdevs,
>
> Use the proper defines, not '0'.
I'll change this to PLATFORM_DEVID_NONE
>
>> + n_subdevs, NULL, 0, NULL);
>> if (ret) {
>> - dev_err(&pdev->dev, "add mfd devices failed: %d\n", ret);
>> + dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
>
> This needs to be grouped with the other error message change above.
>
will do.
>> return ret;
>> }
>>
>> return 0;
>> }
>>
>> -static const struct of_device_id of_hi6421_pmic_match_tbl[] = {
>> - { .compatible = "hisilicon,hi6421-pmic", },
>> - { },
>> -};
>> -MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match_tbl);
>> -
>> static struct platform_driver hi6421_pmic_driver = {
>> .driver = {
>> - .name = "hi6421_pmic",
>> - .of_match_table = of_hi6421_pmic_match_tbl,
>> + .name = "hi6421_pmic",
>> + .of_match_table = of_hi6421_pmic_match,
>> },
>> .probe = hi6421_pmic_probe,
>> };
>> diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h
>> index 587273e..2457438 100644
>> --- a/include/linux/mfd/hi6421-pmic.h
>> +++ b/include/linux/mfd/hi6421-pmic.h
>> @@ -38,4 +38,9 @@ struct hi6421_pmic {
>> struct regmap *regmap;
>> };
>>
>> +enum hi6421_type {
>> + HI6421 = 1,
>> + HI6421_V530 = 2,
>
> Why 1 and 2?
>
I didn't get your point. I have no special reason. Actually, any value
should work. I just need two value to differentiate two chips.
Did you see any problem if I use 1 and 2?
-Guodong
>> +};
>> +
>> #endif /* __HI6421_PMIC_H */
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
The patch
regulator: hi6421v530: add driver for hi6421v530 voltage regulator
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 5c7024ae7e6787541dd737ba1eba828d5fc74d58 Mon Sep 17 00:00:00 2001
From: Wang Xiaoyin <[email protected]>
Date: Wed, 7 Jun 2017 15:06:03 +0800
Subject: [PATCH] regulator: hi6421v530: add driver for hi6421v530 voltage
regulator
add the driver for hi6421v530 voltage regulator
Signed-off-by: Wang Xiaoyin <[email protected]>
Signed-off-by: Guodong Xu <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
drivers/regulator/Kconfig | 10 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/hi6421v530-regulator.c | 207 +++++++++++++++++++++++++++++++
3 files changed, 218 insertions(+)
create mode 100644 drivers/regulator/hi6421v530-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 48db87d6dfef..78cd8d84a2cb 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -296,6 +296,16 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
+config REGULATOR_HI6421V530
+ tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
+ depends on MFD_HI6421_PMIC && OF
+ help
+ This driver provides support for the voltage regulators on
+ HiSilicon Hi6421v530 PMU / Codec IC.
+ Hi6421v530 is a multi-function device which, on regulator part,
+ provides 5 general purpose LDOs, and all of them come with support
+ to either ECO (idle) or sleep mode.
+
config REGULATOR_HI655X
tristate "Hisilicon HI655X PMIC regulators support"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index dc3503fb3e30..36e2b750b188 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c
new file mode 100644
index 000000000000..46bbba96307f
--- /dev/null
+++ b/drivers/regulator/hi6421v530-regulator.c
@@ -0,0 +1,207 @@
+/*
+ * Device driver for regulators in Hi6421V530 IC
+ *
+ * Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2017> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Wang Xiaoyin <[email protected]>
+ * Guodong Xu <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/hi6421-pmic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * struct hi6421v530_regulator_info - hi6421v530 regulator information
+ * @desc: regulator description
+ * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
+ * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
+ */
+struct hi6421v530_regulator_info {
+ struct regulator_desc rdesc;
+ u8 mode_mask;
+ u32 eco_microamp;
+};
+
+/* HI6421v530 regulators */
+enum hi6421v530_regulator_id {
+ HI6421V530_LDO3,
+ HI6421V530_LDO9,
+ HI6421V530_LDO11,
+ HI6421V530_LDO15,
+ HI6421V530_LDO16,
+};
+
+static const unsigned int ldo_3_voltages[] = {
+ 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000,
+ 2000000, 2025000, 2050000, 2075000,
+ 2100000, 2125000, 2150000, 2200000,
+};
+
+static const unsigned int ldo_9_11_voltages[] = {
+ 1750000, 1800000, 1825000, 2800000,
+ 2850000, 2950000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_15_16_voltages[] = {
+ 1750000, 1800000, 2400000, 2600000,
+ 2700000, 2850000, 2950000, 3000000,
+};
+
+static const struct regulator_ops hi6421v530_ldo_ops;
+
+#define HI6421V530_LDO_ENABLE_TIME (350)
+
+/*
+ * _id - LDO id name string
+ * v_table - voltage table
+ * vreg - voltage select register
+ * vmask - voltage select mask
+ * ereg - enable register
+ * emask - enable mask
+ * odelay - off/on delay time in uS
+ * ecomask - eco mode mask
+ * ecoamp - eco mode load uppler limit in uA
+ */
+#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \
+ odelay, ecomask, ecoamp) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &hi6421v530_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI6421V530_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(v_table), \
+ .volt_table = v_table, \
+ .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
+ .enable_mask = emask, \
+ .enable_time = HI6421V530_LDO_ENABLE_TIME, \
+ .off_on_delay = odelay, \
+ }, \
+ .mode_mask = ecomask, \
+ .eco_microamp = ecoamp, \
+}
+
+/* HI6421V530 regulator information */
+
+static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = {
+ HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2,
+ 20000, 0x6, 8000),
+ HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2,
+ 40000, 0x6, 8000),
+};
+
+static unsigned int hi6421v530_regulator_ldo_get_mode(
+ struct regulator_dev *rdev)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int reg_val;
+
+ info = rdev_get_drvdata(rdev);
+ regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val);
+
+ if (reg_val & (info->mode_mask))
+ return REGULATOR_MODE_IDLE;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int new_mode;
+
+ info = rdev_get_drvdata(rdev);
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ new_mode = 0;
+ break;
+ case REGULATOR_MODE_IDLE:
+ new_mode = info->mode_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ info->mode_mask, new_mode);
+
+ return 0;
+}
+
+
+static const struct regulator_ops hi6421v530_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_mode = hi6421v530_regulator_ldo_get_mode,
+ .set_mode = hi6421v530_regulator_ldo_set_mode,
+};
+
+static int hi6421v530_regulator_probe(struct platform_device *pdev)
+{
+ struct hi6421_pmic *pmic;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+ unsigned int i;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) {
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+ config.driver_data = &hi6421v530_regulator_info[i];
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &hi6421v530_regulator_info[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ hi6421v530_regulator_info[i].rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi6421v530_regulator_driver = {
+ .driver = {
+ .name = "hi6421v530-regulator",
+ },
+ .probe = hi6421v530_regulator_probe,
+};
+module_platform_driver(hi6421v530_regulator_driver);
+
+MODULE_AUTHOR("Wang Xiaoyin <[email protected]>");
+MODULE_DESCRIPTION("Hi6421v530 regulator driver");
+MODULE_LICENSE("GPL v2");
--
2.11.0