2017-06-03 01:57:37

by Eric Anholt

[permalink] [raw]
Subject: [PATCH] drm/pl111: Fix offset calculation for the primary plane.

If src_x/y were nonzero, we failed to shift them down by 16 to get the
pixel offset. The recent CMA helper function gets it right.

Signed-off-by: Eric Anholt <[email protected]>
Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Reported-by: Mircea Carausu <[email protected]>
---
drivers/gpu/drm/pl111/pl111_display.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
index 3e0a4fa73ddb..c6ca4f1bbd49 100644
--- a/drivers/gpu/drm/pl111/pl111_display.c
+++ b/drivers/gpu/drm/pl111/pl111_display.c
@@ -50,17 +50,6 @@ irqreturn_t pl111_irq(int irq, void *data)
return status;
}

-static u32 pl111_get_fb_offset(struct drm_plane_state *pstate)
-{
- struct drm_framebuffer *fb = pstate->fb;
- struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0);
-
- return (obj->paddr +
- fb->offsets[0] +
- fb->format->cpp[0] * pstate->src_x +
- fb->pitches[0] * pstate->src_y);
-}
-
static int pl111_display_check(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *pstate,
struct drm_crtc_state *cstate)
@@ -73,7 +62,7 @@ static int pl111_display_check(struct drm_simple_display_pipe *pipe,
return -EINVAL;

if (fb) {
- u32 offset = pl111_get_fb_offset(pstate);
+ u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);

/* FB base address must be dword aligned. */
if (offset & 3)
@@ -249,7 +238,7 @@ static void pl111_display_update(struct drm_simple_display_pipe *pipe,
struct drm_framebuffer *fb = pstate->fb;

if (fb) {
- u32 addr = pl111_get_fb_offset(pstate);
+ u32 addr = drm_fb_cma_get_gem_addr(fb, pstate, 0);

writel(addr, priv->regs + CLCD_UBAS);
}
--
2.11.0


2017-06-06 14:30:34

by Sean Paul

[permalink] [raw]
Subject: Re: [PATCH] drm/pl111: Fix offset calculation for the primary plane.

On Fri, Jun 02, 2017 at 06:57:33PM -0700, Eric Anholt wrote:
> If src_x/y were nonzero, we failed to shift them down by 16 to get the
> pixel offset. The recent CMA helper function gets it right.
>
> Signed-off-by: Eric Anholt <[email protected]>
> Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
> Reported-by: Mircea Carausu <[email protected]>


Reviewed-by: Sean Paul <[email protected]>

> ---
> drivers/gpu/drm/pl111/pl111_display.c | 15 ++-------------
> 1 file changed, 2 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/pl111/pl111_display.c b/drivers/gpu/drm/pl111/pl111_display.c
> index 3e0a4fa73ddb..c6ca4f1bbd49 100644
> --- a/drivers/gpu/drm/pl111/pl111_display.c
> +++ b/drivers/gpu/drm/pl111/pl111_display.c
> @@ -50,17 +50,6 @@ irqreturn_t pl111_irq(int irq, void *data)
> return status;
> }
>
> -static u32 pl111_get_fb_offset(struct drm_plane_state *pstate)
> -{
> - struct drm_framebuffer *fb = pstate->fb;
> - struct drm_gem_cma_object *obj = drm_fb_cma_get_gem_obj(fb, 0);
> -
> - return (obj->paddr +
> - fb->offsets[0] +
> - fb->format->cpp[0] * pstate->src_x +
> - fb->pitches[0] * pstate->src_y);
> -}
> -
> static int pl111_display_check(struct drm_simple_display_pipe *pipe,
> struct drm_plane_state *pstate,
> struct drm_crtc_state *cstate)
> @@ -73,7 +62,7 @@ static int pl111_display_check(struct drm_simple_display_pipe *pipe,
> return -EINVAL;
>
> if (fb) {
> - u32 offset = pl111_get_fb_offset(pstate);
> + u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0);
>
> /* FB base address must be dword aligned. */
> if (offset & 3)
> @@ -249,7 +238,7 @@ static void pl111_display_update(struct drm_simple_display_pipe *pipe,
> struct drm_framebuffer *fb = pstate->fb;
>
> if (fb) {
> - u32 addr = pl111_get_fb_offset(pstate);
> + u32 addr = drm_fb_cma_get_gem_addr(fb, pstate, 0);
>
> writel(addr, priv->regs + CLCD_UBAS);
> }
> --
> 2.11.0
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Sean Paul, Software Engineer, Google / Chromium OS

2017-06-07 18:52:03

by Eric Anholt

[permalink] [raw]
Subject: Re: [PATCH] drm/pl111: Fix offset calculation for the primary plane.

Sean Paul <[email protected]> writes:

> On Fri, Jun 02, 2017 at 06:57:33PM -0700, Eric Anholt wrote:
>> If src_x/y were nonzero, we failed to shift them down by 16 to get the
>> pixel offset. The recent CMA helper function gets it right.
>>
>> Signed-off-by: Eric Anholt <[email protected]>
>> Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
>> Reported-by: Mircea Carausu <[email protected]>
>
>
> Reviewed-by: Sean Paul <[email protected]>

Pushed. Thanks!


Attachments:
signature.asc (832.00 B)