Hi,
As requested by Linus Walleij this series is a merge between the series
"Add support for the pin controllers on the Marvell Armada 7K/8K" [1]
and "Extend mvebu gpio driver to support the controllers of the
Marvell Armada 7K/8K" [2].
The first part of the series is adding the support for the pin
controllers found on the Marvell Armada 7K/8K.
These controllers are compatible with the ones found on the ARM32
mvebu SoCs. However, the pinctrl node in the device tree of theses
SoCs are child of a syscon. So for them we will reuse the regmap
support introduced by Russell King.
Each component of the Armada 7K and 8K comes with their own pin
controller, that's why we have 2 new drivers: one for the CP110 and
one for the AP806.
The second part of the series extends the mvebu gpio driver to support
the gpio controllers found on the Marvell Armada 7K/8K SoCs.
The gpio controllers used on the Marvell Armada 7K/8K SoCs are the
same that the ones used on the ARM32 mvebu SoCs. However, the pinctrl
node in the device tree of theses SoCs are child of a syscon.
The patch modifying the documentation still depend on the ones of the
clk series. For the ap806 a first stable branch is already available:
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/log/?h=clk-ap806
Also note that the dts patch have to be merged through the mvebu tree
to avoid merge conflict expected with the ICU series sent a few days
ago.
Thanks,
Gregory
Changelog:
v1 -> v2:
- Merged of the pinctrl and gpio series.
- Rebased on next-20170531 (which contains gpio and pinctrl commit
already applied).
- Removed already applied patches.
- Remove the modular support of the drivers, suggested by Paul
Gortmaker.
- Added tested-by from Thomas Petazzoni.
- Added acked-by from Rob Herring.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-May/507396.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-May/507405.html
Gregory CLEMENT (8):
pinctrl: dt-bindings: add documentation for AP806 pin controllers
pinctrl: dt-bindings: add documentation for CP110 pin controllers
pinctrl: mvebu: remove the offset property for regmap
arm64: marvell: enable the Armada 7K/8K pinctrl driver
arm64: dts: marvell: add pinctrl support for Armada 7K/8K
gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
gpio: mvebu: Add support for the Armada 7K/8K SoCs
arm64: dts: marvell: add gpio support for Armada 7K/8K
Hanna Hawa (2):
pinctrl: mvebu: add driver for Armada AP806 pinctrl
pinctrl: mvebu: add driver for Armada CP110 pinctrl
Russell King (1):
pinctrl: avoid PLAT_ORION dependency
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt | 73 +++++++-
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt | 123 ++++++++++++-
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 24 ++-
arch/arm64/Kconfig.platforms | 2 +-
arch/arm64/boot/dts/marvell/armada-7020.dtsi | 2 +-
arch/arm64/boot/dts/marvell/armada-7040.dtsi | 2 +-
arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 68 +++++++-
arch/arm64/boot/dts/marvell/armada-8020.dtsi | 3 +-
arch/arm64/boot/dts/marvell/armada-8040.dtsi | 3 +-
arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 76 ++++++++-
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 +-
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 21 ++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 22 ++-
drivers/gpio/gpio-mvebu.c | 212 ++++++++++++++--------
drivers/pinctrl/mvebu/Kconfig | 12 +-
drivers/pinctrl/mvebu/Makefile | 2 +-
drivers/pinctrl/mvebu/pinctrl-armada-ap806.c | 140 +++++++++++++++-
drivers/pinctrl/mvebu/pinctrl-armada-cp110.c | 687 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
drivers/pinctrl/mvebu/pinctrl-mvebu.c | 6 +-
drivers/pinctrl/mvebu/pinctrl-mvebu.h | 2 +-
20 files changed, 1386 insertions(+), 108 deletions(-)
create mode 100644 arch/arm64/boot/dts/marvell/armada-70x0.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/armada-80x0.dtsi
create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-cp110.c
base-commit: 342db02d4f2e08aed46ecae7c1572582049685d6
--
git-series 0.9.1
Document the device tree binding for the pin controllers found on the
Armada 7K and Armada 8K SoCs.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt | 101 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 94 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
index e0b9ef5d3dde..733beac7724e 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
@@ -67,14 +67,101 @@ Required properties:
"marvell,cp110-clock"
- #clock-cells: must be set to 2
+Pinctrl:
+--------
+
+For common binding part and usage, refer to the file
+Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
+
+Required properties:
+
+- compatible: "marvell,armada-7k-pinctrl",
+ "marvell,armada-8k-cpm-pinctrl" or "marvell,armada-8k-cps-pinctrl"
+ depending on the specific variant of the SoC being used.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio)
+mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc)
+mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc)
+mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio)
+mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc)
+mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio)
+mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
+mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk)
+mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk)
+mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk)
+mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
+mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act)
+mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk)
+mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso)
+mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn)
+mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp)
+mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk)
+mpp17 17 gpio, dev(ad5), ge0(txd3)
+mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp)
+mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp)
+mpp20 20 gpio, dev(ad2), ge0(txd0)
+mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp)
+mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp)
+mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp)
+mpp24 24 gpio, dev(a0), au(i2slrclk)
+mpp25 25 gpio, dev(oen), au(i2sdo_spdifo)
+mpp26 26 gpio, dev(wen0), au(i2sbclk)
+mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
+mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
+mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
+mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk)
+mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc)
+mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0
+mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1
+mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2
+mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3
+mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5
+mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp)
+mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp)
+mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0
+mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1
+mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp)
+mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4
+mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp)
+mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp)
+mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn)
+mpp46 46 gpio, ge1(txd1), uart1(rts)
+mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc)
+mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp)
+mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp)
+mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11)
+mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10)
+mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq)
+mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led)
+mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect)
+mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect)
+mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk)
+mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd)
+mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0)
+mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1)
+mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2)
+mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
+mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
+
Example:
- cpm_syscon0: system-controller@440000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x1000>;
+cpm_syscon0: system-controller@440000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x440000 0x1000>;
- cpm_clk: clock {
- compatible = "marvell,cp110-clock";
- #clock-cells = <2>;
- };
+ cpm_clk: clock {
+ compatible = "marvell,cp110-clock";
+ #clock-cells = <2>;
};
+
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cpm-pinctrl";
+ };
+};
+
--
git-series 0.9.1
From: Hanna Hawa <[email protected]>
This commit adds a pinctrl driver for the pin-muxing controller found in
the AP806 part of the Marvell Armada 7K and 8K SoCs. Its register
interface is compatible with the one used by previous mvebu pin
controllers, so the common logic in drivers/pinctrl/mvebu/pinctrl-mvebu.c
is used.
Signed-off-by: Hanna Hawa <[email protected]>
Reviewed-by: Shadi Ammouri <[email protected]>
[updated for mvebu pinctrl changes
- converted to simple_mmio
- removed unimplemented .remove function
- removed DTS description
- converted to use syscon/regmap
--rmk]
Signed-off-by: Russell King <[email protected]>
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
drivers/pinctrl/mvebu/Kconfig | 4 +-
drivers/pinctrl/mvebu/Makefile | 1 +-
drivers/pinctrl/mvebu/pinctrl-armada-ap806.c | 140 ++++++++++++++++++++-
3 files changed, 145 insertions(+)
create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index 8cb444b60ae9..0e0b009f2b71 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -28,6 +28,10 @@ config PINCTRL_ARMADA_39X
bool
select PINCTRL_MVEBU
+config PINCTRL_ARMADA_AP806
+ bool
+ select PINCTRL_MVEBU
+
config PINCTRL_ARMADA_XP
bool
select PINCTRL_MVEBU
diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile
index 60c245a60f39..455db274b53d 100644
--- a/drivers/pinctrl/mvebu/Makefile
+++ b/drivers/pinctrl/mvebu/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_ARMADA_370) += pinctrl-armada-370.o
obj-$(CONFIG_PINCTRL_ARMADA_375) += pinctrl-armada-375.o
obj-$(CONFIG_PINCTRL_ARMADA_38X) += pinctrl-armada-38x.o
obj-$(CONFIG_PINCTRL_ARMADA_39X) += pinctrl-armada-39x.o
+obj-$(CONFIG_PINCTRL_ARMADA_AP806) += pinctrl-armada-ap806.o
obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
obj-$(CONFIG_PINCTRL_ARMADA_37XX) += pinctrl-armada-37xx.o
obj-$(CONFIG_PINCTRL_ORION) += pinctrl-orion.o
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c b/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
new file mode 100644
index 000000000000..66e442260a4e
--- /dev/null
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-ap806.c
@@ -0,0 +1,140 @@
+/*
+ * Marvell Armada ap806 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Thomas Petazzoni <[email protected]>
+ * Hanna Hawa <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-mvebu.h"
+
+static struct mvebu_mpp_mode armada_ap806_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "clk"),
+ MPP_FUNCTION(3, "spi0", "clk")),
+ MPP_MODE(1,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "cmd"),
+ MPP_FUNCTION(3, "spi0", "miso")),
+ MPP_MODE(2,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d0"),
+ MPP_FUNCTION(3, "spi0", "mosi")),
+ MPP_MODE(3,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d1"),
+ MPP_FUNCTION(3, "spi0", "cs0n")),
+ MPP_MODE(4,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d2"),
+ MPP_FUNCTION(3, "i2c0", "sda")),
+ MPP_MODE(5,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d3"),
+ MPP_FUNCTION(3, "i2c0", "sdk")),
+ MPP_MODE(6,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "ds")),
+ MPP_MODE(7,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d4"),
+ MPP_FUNCTION(3, "uart1", "rxd")),
+ MPP_MODE(8,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d5"),
+ MPP_FUNCTION(3, "uart1", "txd")),
+ MPP_MODE(9,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d6"),
+ MPP_FUNCTION(3, "spi0", "cs1n")),
+ MPP_MODE(10,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "d7")),
+ MPP_MODE(11,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(3, "uart0", "txd")),
+ MPP_MODE(12,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "pw_off"),
+ MPP_FUNCTION(2, "sdio", "hw_rst")),
+ MPP_MODE(13,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(14,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(15,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(16,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(17,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(18,
+ MPP_FUNCTION(0, "gpio", NULL)),
+ MPP_MODE(19,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(3, "uart0", "rxd"),
+ MPP_FUNCTION(4, "sdio", "pw_off")),
+};
+
+static struct mvebu_pinctrl_soc_info armada_ap806_pinctrl_info;
+
+static const struct of_device_id armada_ap806_pinctrl_of_match[] = {
+ {
+ .compatible = "marvell,ap806-pinctrl",
+ },
+ { },
+};
+
+static const struct mvebu_mpp_ctrl armada_ap806_mpp_controls[] = {
+ MPP_FUNC_CTRL(0, 19, NULL, mvebu_regmap_mpp_ctrl),
+};
+
+static struct pinctrl_gpio_range armada_ap806_mpp_gpio_ranges[] = {
+ MPP_GPIO_RANGE(0, 0, 0, 20),
+};
+
+static int armada_ap806_pinctrl_probe(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc = &armada_ap806_pinctrl_info;
+ const struct of_device_id *match =
+ of_match_device(armada_ap806_pinctrl_of_match, &pdev->dev);
+
+ if (!match || !pdev->dev.parent)
+ return -ENODEV;
+
+ soc->variant = 0; /* no variants for Armada AP806 */
+ soc->controls = armada_ap806_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(armada_ap806_mpp_controls);
+ soc->gpioranges = armada_ap806_mpp_gpio_ranges;
+ soc->ngpioranges = ARRAY_SIZE(armada_ap806_mpp_gpio_ranges);
+ soc->modes = armada_ap806_mpp_modes;
+ soc->nmodes = armada_ap806_mpp_controls[0].npins;
+
+ pdev->dev.platform_data = soc;
+
+ return mvebu_pinctrl_simple_regmap_probe(pdev, pdev->dev.parent, 0);
+}
+
+static struct platform_driver armada_ap806_pinctrl_driver = {
+ .driver = {
+ .name = "armada-ap806-pinctrl",
+ .of_match_table = of_match_ptr(armada_ap806_pinctrl_of_match),
+ },
+ .probe = armada_ap806_pinctrl_probe,
+};
+
+builtin_platform_driver(armada_ap806_pinctrl_driver);
--
git-series 0.9.1
Enable gpio support for CP and AP on the Marvell Armada 7K/8K SoCs.
The Armada 8K has two CP110 blocks, each having two GPIO controllers.
However, in each CP110 block, one of the GPIO controller cannot be
used: in the master CP110, only the second GPIO controller can be used,
while on the slave CP110, only the first GPIO controller can be used.
On the other side, the Armada 7K has only one CP110, but both its GPIO
controllers can be used.
For this reason, the GPIO controllers are marked as "disabled" in the
armada-cp110-master.dtsi and armada-cp110-slave.dtsi files, and only
enabled in the per-SoC dtsi files.
Signed-off-by: Gregory CLEMENT <[email protected]>
---
arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 15 +++++++++-
arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 16 +++++++++-
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 10 ++++++-
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 21 ++++++++++++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 22 +++++++++++++-
5 files changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
index f6c22665d091..860b6ae9dcc5 100644
--- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -46,6 +46,21 @@
#include "armada-cp110-master.dtsi"
+/ {
+ aliases {
+ gpio1 = &cpm_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+&cpm_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
&cpm_syscon0 {
cpm_pinctrl: pinctrl {
compatible = "marvell,armada-7k-pinctrl";
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
index 93d1de03b39a..666ebe96ba0d 100644
--- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -47,6 +47,22 @@
#include "armada-cp110-master.dtsi"
#include "armada-cp110-slave.dtsi"
+/ {
+ aliases {
+ gpio1 = &cps_gpio1;
+ gpio2 = &cpm_gpio2;
+ };
+};
+
+/* The 80x0 has two CP blocks, but uses only one block from each. */
+&cps_gpio1 {
+ status = "okay";
+};
+
+&cpm_gpio2 {
+ status = "okay";
+};
+
&cpm_syscon0 {
cpm_pinctrl: pinctrl {
compatible = "marvell,armada-8k-cpm-pinctrl";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index c6c30143eb29..f19d5077ba8d 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -57,6 +57,7 @@
aliases {
serial0 = &uart0;
serial1 = &uart1;
+ gpio0 = &ap_gpio;
};
psci {
@@ -256,6 +257,15 @@
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
};
+
+ ap_gpio: gpio {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 19>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 4788a87fc43c..1bcd549228db 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -104,6 +104,27 @@
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
};
+
+ cpm_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cpm_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 32 31>;
+ status = "disabled";
+ };
};
cpm_rtc: rtc@284000 {
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index e21cdbdbe37b..b46a208c72f2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -111,6 +111,28 @@
compatible = "marvell,cp110-clock";
#clock-cells = <2>;
};
+
+ cps_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 0 32>;
+ status = "disabled";
+
+ };
+
+ cps_gpio2: gpio@140 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x140>;
+ ngpios = <31>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cps_pinctrl 0 32 31>;
+ status = "disabled";
+ };
+
};
cps_sata0: sata@540000 {
--
git-series 0.9.1
The Armada 7K and 8K SoCs use the same gpio controller as most of the
other mvebu SoCs. However, the main difference is that the GPIO
controller is part of a bigger system controller, and a syscon is used to
control the overall system controller. Therefore, the driver needs to be
adjusted to retrieve the regmap of the syscon to access registers, and
account for the fact that registers are located at a certain offset
within the regmap.
This commit add the support of the syscon and introduce a new variant for
this case.
It was based on the preliminary work of Thomas Petazzoni.
Tested-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
drivers/gpio/gpio-mvebu.c | 212 +++++++++++++++++++++++++--------------
1 file changed, 141 insertions(+), 71 deletions(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 3d03740a20e7..5edb04abd7d7 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -42,6 +42,7 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
@@ -88,6 +89,7 @@
#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
#define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3
+#define MVEBU_GPIO_SOC_VARIANT_A8K 0x4
#define MVEBU_MAX_GPIO_PER_BANK 32
@@ -108,6 +110,7 @@ struct mvebu_pwm {
struct mvebu_gpio_chip {
struct gpio_chip chip;
struct regmap *regs;
+ u32 offset;
struct regmap *percpu_regs;
int irqbase;
struct irq_domain *domain;
@@ -139,8 +142,9 @@ static void mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip,
switch (mvchip->soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
case MVEBU_GPIO_SOC_VARIANT_MV78200:
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
*map = mvchip->regs;
- *offset = GPIO_EDGE_CAUSE_OFF;
+ *offset = GPIO_EDGE_CAUSE_OFF + mvchip->offset;
break;
case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
cpu = smp_processor_id();
@@ -183,8 +187,9 @@ mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip,
switch (mvchip->soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
*map = mvchip->regs;
- *offset = GPIO_EDGE_MASK_OFF;
+ *offset = GPIO_EDGE_MASK_OFF + mvchip->offset;
break;
case MVEBU_GPIO_SOC_VARIANT_MV78200:
cpu = smp_processor_id();
@@ -232,8 +237,9 @@ mvebu_gpioreg_level_mask(struct mvebu_gpio_chip *mvchip,
switch (mvchip->soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
*map = mvchip->regs;
- *offset = GPIO_LEVEL_MASK_OFF;
+ *offset = GPIO_LEVEL_MASK_OFF + mvchip->offset;
break;
case MVEBU_GPIO_SOC_VARIANT_MV78200:
cpu = smp_processor_id();
@@ -294,7 +300,7 @@ static void mvebu_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
{
struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
- regmap_update_bits(mvchip->regs, GPIO_OUT_OFF,
+ regmap_update_bits(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
BIT(pin), value ? BIT(pin) : 0);
}
@@ -303,16 +309,18 @@ static int mvebu_gpio_get(struct gpio_chip *chip, unsigned int pin)
struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
u32 u;
- regmap_read(mvchip->regs, GPIO_IO_CONF_OFF, &u);
+ regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u);
if (u & BIT(pin)) {
u32 data_in, in_pol;
- regmap_read(mvchip->regs, GPIO_DATA_IN_OFF, &data_in);
- regmap_read(mvchip->regs, GPIO_IN_POL_OFF, &in_pol);
+ regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset,
+ &data_in);
+ regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+ &in_pol);
u = data_in ^ in_pol;
} else {
- regmap_read(mvchip->regs, GPIO_OUT_OFF, &u);
+ regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &u);
}
return (u >> pin) & 1;
@@ -323,7 +331,7 @@ static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned int pin,
{
struct mvebu_gpio_chip *mvchip = gpiochip_get_data(chip);
- regmap_update_bits(mvchip->regs, GPIO_BLINK_EN_OFF,
+ regmap_update_bits(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
BIT(pin), value ? BIT(pin) : 0);
}
@@ -340,7 +348,7 @@ static int mvebu_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
if (ret)
return ret;
- regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF,
+ regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
BIT(pin), 1);
return 0;
@@ -363,7 +371,7 @@ static int mvebu_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
mvebu_gpio_blink(chip, pin, 0);
mvebu_gpio_set(chip, pin, value);
- regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF,
+ regmap_update_bits(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
BIT(pin), 0);
return 0;
@@ -478,7 +486,7 @@ static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
pin = d->hwirq;
- regmap_read(mvchip->regs, GPIO_IO_CONF_OFF, &u);
+ regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &u);
if ((u & BIT(pin)) == 0)
return -EINVAL;
@@ -497,19 +505,23 @@ static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_LEVEL_HIGH:
- regmap_update_bits(mvchip->regs, GPIO_IN_POL_OFF,
+ regmap_update_bits(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset,
BIT(pin), 0);
break;
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_LEVEL_LOW:
- regmap_update_bits(mvchip->regs, GPIO_IN_POL_OFF,
+ regmap_update_bits(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset,
BIT(pin), 1);
break;
case IRQ_TYPE_EDGE_BOTH: {
u32 data_in, in_pol, val;
- regmap_read(mvchip->regs, GPIO_IN_POL_OFF, &in_pol);
- regmap_read(mvchip->regs, GPIO_DATA_IN_OFF, &data_in);
+ regmap_read(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset, &in_pol);
+ regmap_read(mvchip->regs,
+ GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
/*
* set initial polarity based on current input level
@@ -519,7 +531,8 @@ static int mvebu_gpio_irq_set_type(struct irq_data *d, unsigned int type)
else
val = 0; /* raising */
- regmap_update_bits(mvchip->regs, GPIO_IN_POL_OFF,
+ regmap_update_bits(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset,
BIT(pin), val);
break;
}
@@ -539,7 +552,7 @@ static void mvebu_gpio_irq_handler(struct irq_desc *desc)
chained_irq_enter(chip, desc);
- regmap_read(mvchip->regs, GPIO_DATA_IN_OFF, &data_in);
+ regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
level_mask = mvebu_gpio_read_level_mask(mvchip);
edge_cause = mvebu_gpio_read_edge_cause(mvchip);
edge_mask = mvebu_gpio_read_edge_mask(mvchip);
@@ -559,9 +572,13 @@ static void mvebu_gpio_irq_handler(struct irq_desc *desc)
/* Swap polarity (race with GPIO line) */
u32 polarity;
- regmap_read(mvchip->regs, GPIO_IN_POL_OFF, &polarity);
+ regmap_read(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset,
+ &polarity);
polarity ^= BIT(i);
- regmap_write(mvchip->regs, GPIO_IN_POL_OFF, polarity);
+ regmap_write(mvchip->regs,
+ GPIO_IN_POL_OFF + mvchip->offset,
+ polarity);
}
generic_handle_irq(irq);
@@ -664,7 +681,7 @@ static void mvebu_pwm_get_state(struct pwm_chip *chip,
state->period = 1;
}
- regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF, &u);
+ regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &u);
if (u)
state->enabled = true;
else
@@ -727,7 +744,7 @@ static void __maybe_unused mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
{
struct mvebu_pwm *mvpwm = mvchip->mvpwm;
- regmap_read(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF,
+ regmap_read(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset,
&mvpwm->blink_select);
mvpwm->blink_on_duration =
readl_relaxed(mvebu_pwmreg_blink_on_duration(mvpwm));
@@ -739,7 +756,7 @@ static void __maybe_unused mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
{
struct mvebu_pwm *mvpwm = mvchip->mvpwm;
- regmap_write(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF,
+ regmap_write(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset,
mvpwm->blink_select);
writel_relaxed(mvpwm->blink_on_duration,
mvebu_pwmreg_blink_on_duration(mvpwm));
@@ -783,7 +800,8 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
set = U32_MAX;
else
return -EINVAL;
- regmap_write(mvchip->regs, GPIO_BLINK_CNT_SELECT_OFF, 0);
+ regmap_write(mvchip->regs,
+ GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, 0);
mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
if (!mvpwm)
@@ -819,11 +837,11 @@ static void mvebu_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
int i;
- regmap_read(mvchip->regs, GPIO_OUT_OFF, &out);
- regmap_read(mvchip->regs, GPIO_IO_CONF_OFF, &io_conf);
- regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF, &blink);
- regmap_read(mvchip->regs, GPIO_IN_POL_OFF, &in_pol);
- regmap_read(mvchip->regs, GPIO_DATA_IN_OFF, &data_in);
+ regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset, &out);
+ regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset, &io_conf);
+ regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset, &blink);
+ regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset, &in_pol);
+ regmap_read(mvchip->regs, GPIO_DATA_IN_OFF + mvchip->offset, &data_in);
cause = mvebu_gpio_read_edge_cause(mvchip);
edg_msk = mvebu_gpio_read_edge_mask(mvchip);
lvl_msk = mvebu_gpio_read_level_mask(mvchip);
@@ -885,6 +903,10 @@ static const struct of_device_id mvebu_gpio_of_match[] = {
.data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
},
{
+ .compatible = "marvell,armada-8k-gpio",
+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_A8K,
+ },
+ {
/* sentinel */
},
};
@@ -894,16 +916,21 @@ static int mvebu_gpio_suspend(struct platform_device *pdev, pm_message_t state)
struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
int i;
- regmap_read(mvchip->regs, GPIO_OUT_OFF, &mvchip->out_reg);
- regmap_read(mvchip->regs, GPIO_IO_CONF_OFF, &mvchip->io_conf_reg);
- regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF, &mvchip->blink_en_reg);
- regmap_read(mvchip->regs, GPIO_IN_POL_OFF, &mvchip->in_pol_reg);
+ regmap_read(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
+ &mvchip->out_reg);
+ regmap_read(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+ &mvchip->io_conf_reg);
+ regmap_read(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
+ &mvchip->blink_en_reg);
+ regmap_read(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+ &mvchip->in_pol_reg);
switch (mvchip->soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
- regmap_read(mvchip->regs, GPIO_EDGE_MASK_OFF,
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
+ regmap_read(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset,
&mvchip->edge_mask_regs[0]);
- regmap_read(mvchip->regs, GPIO_LEVEL_MASK_OFF,
+ regmap_read(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset,
&mvchip->level_mask_regs[0]);
break;
case MVEBU_GPIO_SOC_VARIANT_MV78200:
@@ -941,16 +968,21 @@ static int mvebu_gpio_resume(struct platform_device *pdev)
struct mvebu_gpio_chip *mvchip = platform_get_drvdata(pdev);
int i;
- regmap_write(mvchip->regs, GPIO_OUT_OFF, mvchip->out_reg);
- regmap_write(mvchip->regs, GPIO_IO_CONF_OFF, mvchip->io_conf_reg);
- regmap_write(mvchip->regs, GPIO_BLINK_EN_OFF, mvchip->blink_en_reg);
- regmap_write(mvchip->regs, GPIO_IN_POL_OFF, mvchip->in_pol_reg);
+ regmap_write(mvchip->regs, GPIO_OUT_OFF + mvchip->offset,
+ mvchip->out_reg);
+ regmap_write(mvchip->regs, GPIO_IO_CONF_OFF + mvchip->offset,
+ mvchip->io_conf_reg);
+ regmap_write(mvchip->regs, GPIO_BLINK_EN_OFF + mvchip->offset,
+ mvchip->blink_en_reg);
+ regmap_write(mvchip->regs, GPIO_IN_POL_OFF + mvchip->offset,
+ mvchip->in_pol_reg);
switch (mvchip->soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
- regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF,
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
+ regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF + mvchip->offset,
mvchip->edge_mask_regs[0]);
- regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF,
+ regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF + mvchip->offset,
mvchip->level_mask_regs[0]);
break;
case MVEBU_GPIO_SOC_VARIANT_MV78200:
@@ -990,15 +1022,68 @@ static const struct regmap_config mvebu_gpio_regmap_config = {
.fast_io = true,
};
+static int mvebu_gpio_probe_raw(struct platform_device *pdev,
+ struct mvebu_gpio_chip *mvchip)
+{
+ struct resource *res;
+ void __iomem *base;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ mvchip->regs = devm_regmap_init_mmio(&pdev->dev, base,
+ &mvebu_gpio_regmap_config);
+ if (IS_ERR(mvchip->regs))
+ return PTR_ERR(mvchip->regs);
+
+ /*
+ * For the legacy SoCs, the regmap directly maps to the GPIO
+ * registers, so no offset is needed.
+ */
+ mvchip->offset = 0;
+
+ /*
+ * The Armada XP has a second range of registers for the
+ * per-CPU registers
+ */
+ if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ mvchip->percpu_regs =
+ devm_regmap_init_mmio(&pdev->dev, base,
+ &mvebu_gpio_regmap_config);
+ if (IS_ERR(mvchip->percpu_regs))
+ return PTR_ERR(mvchip->percpu_regs);
+ }
+
+ return 0;
+}
+
+static int mvebu_gpio_probe_syscon(struct platform_device *pdev,
+ struct mvebu_gpio_chip *mvchip)
+{
+ mvchip->regs = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(mvchip->regs))
+ return PTR_ERR(mvchip->regs);
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset", &mvchip->offset))
+ return -EINVAL;
+
+ return 0;
+}
+
static int mvebu_gpio_probe(struct platform_device *pdev)
{
struct mvebu_gpio_chip *mvchip;
const struct of_device_id *match;
struct device_node *np = pdev->dev.of_node;
- struct resource *res;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
- void __iomem *base;
unsigned int ngpios;
bool have_irqs;
int soc_variant;
@@ -1054,41 +1139,26 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
mvchip->chip.of_node = np;
mvchip->chip.dbg_show = mvebu_gpio_dbg_show;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- mvchip->regs = devm_regmap_init_mmio(&pdev->dev, base,
- &mvebu_gpio_regmap_config);
- if (IS_ERR(mvchip->regs))
- return PTR_ERR(mvchip->regs);
+ if (soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K)
+ err = mvebu_gpio_probe_syscon(pdev, mvchip);
+ else
+ err = mvebu_gpio_probe_raw(pdev, mvchip);
- /*
- * The Armada XP has a second range of registers for the
- * per-CPU registers
- */
- if (soc_variant == MVEBU_GPIO_SOC_VARIANT_ARMADAXP) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(base))
- return PTR_ERR(base);
-
- mvchip->percpu_regs =
- devm_regmap_init_mmio(&pdev->dev, base,
- &mvebu_gpio_regmap_config);
- if (IS_ERR(mvchip->percpu_regs))
- return PTR_ERR(mvchip->percpu_regs);
- }
+ if (err)
+ return err;
/*
* Mask and clear GPIO interrupts.
*/
switch (soc_variant) {
case MVEBU_GPIO_SOC_VARIANT_ORION:
- regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0);
- regmap_write(mvchip->regs, GPIO_EDGE_MASK_OFF, 0);
- regmap_write(mvchip->regs, GPIO_LEVEL_MASK_OFF, 0);
+ case MVEBU_GPIO_SOC_VARIANT_A8K:
+ regmap_write(mvchip->regs,
+ GPIO_EDGE_CAUSE_OFF + mvchip->offset, 0);
+ regmap_write(mvchip->regs,
+ GPIO_EDGE_MASK_OFF + mvchip->offset, 0);
+ regmap_write(mvchip->regs,
+ GPIO_LEVEL_MASK_OFF + mvchip->offset, 0);
break;
case MVEBU_GPIO_SOC_VARIANT_MV78200:
regmap_write(mvchip->regs, GPIO_EDGE_CAUSE_OFF, 0);
--
git-series 0.9.1
Document the device tree binding for the gpio controllers found on the
Marvell Armada 7K and Armada 8K SoCs.
Signed-off-by: Gregory CLEMENT <[email protected]>
---
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt | 20 ++++++++++++++++++++
Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt | 24 +++++++++++++++++++++++-
Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 24 +++++++++++++++++-------
3 files changed, 60 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
index 4228d158fb31..0b887440e08a 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
@@ -64,6 +64,17 @@ mpp17 17 gpio
mpp18 18 gpio
mpp19 19 gpio, uart0(rxd), sdio(pw_off)
+GPIO:
+-----
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+
+Required properties:
+
+- compatible: "marvell,armada-8k-gpio"
+
+- offset: offset address inside the syscon block
+
Example:
ap_syscon: system-controller@6f4000 {
compatible = "syscon", "simple-mfd";
@@ -77,4 +88,13 @@ ap_syscon: system-controller@6f4000 {
ap_pinctrl: pinctrl {
compatible = "marvell,ap806-pinctrl";
};
+
+ ap_gpio: gpio {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x1040>;
+ ngpios = <19>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ap_pinctrl 0 0 19>;
+ };
};
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
index 733beac7724e..655c114ef584 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
@@ -149,6 +149,18 @@ mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(r
mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3)
mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc)
+GPIO:
+-----
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+
+Required properties:
+
+- compatible: "marvell,armada-8k-gpio"
+
+- offset: offset address inside the syscon block
+
Example:
cpm_syscon0: system-controller@440000 {
@@ -163,5 +175,15 @@ cpm_syscon0: system-controller@440000 {
cpm_pinctrl: pinctrl {
compatible = "marvell,armada-8k-cpm-pinctrl";
};
-};
+ cpm_gpio1: gpio@100 {
+ compatible = "marvell,armada-8k-gpio";
+ offset = <0x100>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&cpm_pinctrl 0 0 32>;
+ status = "disabled";
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
index 42c3bb2d53e8..2c5304ff467c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@@ -2,17 +2,27 @@
Required properties:
-- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio"
- or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for
- Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada
- 370. "marvell,mv78200-gpio" should be used for the Discovery
- MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP
- SoCs (MV78230, MV78260, MV78460).
+- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
+ "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
+
+ "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
+ Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
+ should be used for the Discovery MV78200.
+
+ "marvel,armadaxp-gpio" should be used for all Armada XP SoCs
+ (MV78230, MV78260, MV78460).
+
+ "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
+ SoCs (either from AP or CP), see
+ Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
+ and
+ Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+ for specific details about the offset property.
- reg: Address and length of the register set for the device. Only one
entry is expected, except for the "marvell,armadaxp-gpio" variant
for which two entries are expected: one for the general registers,
- one for the per-cpu registers.
+ one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
- interrupts: The list of interrupts that are used for all the pins
managed by this GPIO bank. There can be more than one interrupt
--
git-series 0.9.1
From: Hanna Hawa <[email protected]>
This commit adds a pinctrl driver for the CP110 part of the Marvell
Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all
the MPP pins are available. On the other side, the Armada 8K has two
CP110, and the available MPPs are split between the master CP110 (MPPs 32
to 62) and the slave CP110 (MPPs 0 to 31).
The register interface to control the MPPs is however the same as all
other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic.
Signed-off-by: Hanna Hawa <[email protected]>
Reviewed-by: Shadi Ammouri <[email protected]>
[updated for mvebu pinctrl and 4.9 changes:
- converted to simple_mmio
- converted to syscon/regmap
- removed unimplemented .remove function
- dropped DTS changes
- defered gpio ranges to DT
- fixed warning
- properly set soc->nmodes
-- rmk]
Signed-off-by: Russell King <[email protected]>
[ add missing MPP[61:56] function 14 (SDIO)
-- Konstantin Porotchkin]
Signed-off-by: Konstantin Porotchkin <[email protected]>
[ allow to properly register more then one instance of this driver
-- Grzegorz Jaszczyk]
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
[ - rebased on 4.12-rc1
- fixed the 80 character limit for mvebu_mpp_mode array
- aligned the compatible name on the ones already used
- fixed the MPP table for CP110: some MPP are not available on Armada 7K
-- Gregory CLEMENT]
Signed-off-by: Gregory CLEMENT <[email protected]>
Tested-by: Thomas Petazzoni <[email protected]>
---
drivers/pinctrl/mvebu/Kconfig | 4 +-
drivers/pinctrl/mvebu/Makefile | 1 +-
drivers/pinctrl/mvebu/pinctrl-armada-cp110.c | 687 ++++++++++++++++++++-
3 files changed, 692 insertions(+)
create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-cp110.c
diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index 0e0b009f2b71..d9773b77ff9f 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -32,6 +32,10 @@ config PINCTRL_ARMADA_AP806
bool
select PINCTRL_MVEBU
+config PINCTRL_ARMADA_CP110
+ bool
+ select PINCTRL_MVEBU
+
config PINCTRL_ARMADA_XP
bool
select PINCTRL_MVEBU
diff --git a/drivers/pinctrl/mvebu/Makefile b/drivers/pinctrl/mvebu/Makefile
index 455db274b53d..5b03fd55e28d 100644
--- a/drivers/pinctrl/mvebu/Makefile
+++ b/drivers/pinctrl/mvebu/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_ARMADA_375) += pinctrl-armada-375.o
obj-$(CONFIG_PINCTRL_ARMADA_38X) += pinctrl-armada-38x.o
obj-$(CONFIG_PINCTRL_ARMADA_39X) += pinctrl-armada-39x.o
obj-$(CONFIG_PINCTRL_ARMADA_AP806) += pinctrl-armada-ap806.o
+obj-$(CONFIG_PINCTRL_ARMADA_CP110) += pinctrl-armada-cp110.o
obj-$(CONFIG_PINCTRL_ARMADA_XP) += pinctrl-armada-xp.o
obj-$(CONFIG_PINCTRL_ARMADA_37XX) += pinctrl-armada-37xx.o
obj-$(CONFIG_PINCTRL_ORION) += pinctrl-orion.o
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-cp110.c b/drivers/pinctrl/mvebu/pinctrl-armada-cp110.c
new file mode 100644
index 000000000000..7f85beb45482
--- /dev/null
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-cp110.c
@@ -0,0 +1,687 @@
+/*
+ * Marvell Armada CP110 pinctrl driver based on mvebu pinctrl core
+ *
+ * Copyright (C) 2017 Marvell
+ *
+ * Hanna Hawa <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-mvebu.h"
+
+/*
+ * Even if the pin controller is the same the MMP available depend on the SoC
+ * integration.
+ * - In Armada7K (single CP) almost all the MPPs are available (except the
+ * MMP 39 to 43)
+ * - In Armada8K (dual CP) the MPPs are split into 2 parts, MPPs 0-31 from
+ * CPS, and MPPs 32-62 from CPM, the below flags (V_ARMADA_8K_CPM,
+ * V_ARMADA_8K_CPS) set which MPP is available to the CPx.
+ * The x_PLUS enum mean that the MPP available for CPx and for Armada70x0
+ */
+enum {
+ V_ARMADA_7K = BIT(0),
+ V_ARMADA_8K_CPM = BIT(1),
+ V_ARMADA_8K_CPS = BIT(2),
+ V_ARMADA_7K_8K_CPM = (V_ARMADA_7K | V_ARMADA_8K_CPM),
+ V_ARMADA_7K_8K_CPS = (V_ARMADA_7K | V_ARMADA_8K_CPS),
+};
+
+static struct mvebu_mpp_mode armada_cp110_mpp_modes[] = {
+ MPP_MODE(0,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ale1"),
+ MPP_FUNCTION(2, "au", "i2smclk"),
+ MPP_FUNCTION(3, "ge0", "rxd3"),
+ MPP_FUNCTION(4, "tdm", "pclk"),
+ MPP_FUNCTION(6, "ptp", "pulse"),
+ MPP_FUNCTION(7, "mss_i2c", "sda"),
+ MPP_FUNCTION(8, "uart0", "rxd"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "ge", "mdio")),
+ MPP_MODE(1,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ale0"),
+ MPP_FUNCTION(2, "au", "i2sdo_spdifo"),
+ MPP_FUNCTION(3, "ge0", "rxd2"),
+ MPP_FUNCTION(4, "tdm", "drx"),
+ MPP_FUNCTION(6, "ptp", "clk"),
+ MPP_FUNCTION(7, "mss_i2c", "sck"),
+ MPP_FUNCTION(8, "uart0", "txd"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "ge", "mdc")),
+ MPP_MODE(2,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad15"),
+ MPP_FUNCTION(2, "au", "i2sextclk"),
+ MPP_FUNCTION(3, "ge0", "rxd1"),
+ MPP_FUNCTION(4, "tdm", "dtx"),
+ MPP_FUNCTION(5, "mss_uart", "rxd"),
+ MPP_FUNCTION(6, "ptp", "pclk_out"),
+ MPP_FUNCTION(7, "i2c1", "sck"),
+ MPP_FUNCTION(8, "uart1", "rxd"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "xg", "mdc")),
+ MPP_MODE(3,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad14"),
+ MPP_FUNCTION(2, "au", "i2slrclk"),
+ MPP_FUNCTION(3, "ge0", "rxd0"),
+ MPP_FUNCTION(4, "tdm", "fsync"),
+ MPP_FUNCTION(5, "mss_uart", "txd"),
+ MPP_FUNCTION(6, "pcie", "rstoutn"),
+ MPP_FUNCTION(7, "i2c1", "sda"),
+ MPP_FUNCTION(8, "uart1", "txd"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "xg", "mdio")),
+ MPP_MODE(4,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad13"),
+ MPP_FUNCTION(2, "au", "i2sbclk"),
+ MPP_FUNCTION(3, "ge0", "rxctl"),
+ MPP_FUNCTION(4, "tdm", "rstn"),
+ MPP_FUNCTION(5, "mss_uart", "rxd"),
+ MPP_FUNCTION(6, "uart1", "cts"),
+ MPP_FUNCTION(7, "pcie0", "clkreq"),
+ MPP_FUNCTION(8, "uart3", "rxd"),
+ MPP_FUNCTION(10, "ge", "mdc")),
+ MPP_MODE(5,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad12"),
+ MPP_FUNCTION(2, "au", "i2sdi"),
+ MPP_FUNCTION(3, "ge0", "rxclk"),
+ MPP_FUNCTION(4, "tdm", "intn"),
+ MPP_FUNCTION(5, "mss_uart", "txd"),
+ MPP_FUNCTION(6, "uart1", "rts"),
+ MPP_FUNCTION(7, "pcie1", "clkreq"),
+ MPP_FUNCTION(8, "uart3", "txd"),
+ MPP_FUNCTION(10, "ge", "mdio")),
+ MPP_MODE(6,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad11"),
+ MPP_FUNCTION(3, "ge0", "txd3"),
+ MPP_FUNCTION(4, "spi0", "csn2"),
+ MPP_FUNCTION(5, "au", "i2sextclk"),
+ MPP_FUNCTION(6, "sata1", "present_act"),
+ MPP_FUNCTION(7, "pcie2", "clkreq"),
+ MPP_FUNCTION(8, "uart0", "rxd"),
+ MPP_FUNCTION(9, "ptp", "pulse")),
+ MPP_MODE(7,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad10"),
+ MPP_FUNCTION(3, "ge0", "txd2"),
+ MPP_FUNCTION(4, "spi0", "csn1"),
+ MPP_FUNCTION(5, "spi1", "csn1"),
+ MPP_FUNCTION(6, "sata0", "present_act"),
+ MPP_FUNCTION(7, "led", "data"),
+ MPP_FUNCTION(8, "uart0", "txd"),
+ MPP_FUNCTION(9, "ptp", "clk")),
+ MPP_MODE(8,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad9"),
+ MPP_FUNCTION(3, "ge0", "txd1"),
+ MPP_FUNCTION(4, "spi0", "csn0"),
+ MPP_FUNCTION(5, "spi1", "csn0"),
+ MPP_FUNCTION(6, "uart0", "cts"),
+ MPP_FUNCTION(7, "led", "stb"),
+ MPP_FUNCTION(8, "uart2", "rxd"),
+ MPP_FUNCTION(9, "ptp", "pclk_out"),
+ MPP_FUNCTION(10, "synce1", "clk")),
+ MPP_MODE(9,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad8"),
+ MPP_FUNCTION(3, "ge0", "txd0"),
+ MPP_FUNCTION(4, "spi0", "mosi"),
+ MPP_FUNCTION(5, "spi1", "mosi"),
+ MPP_FUNCTION(7, "pcie", "rstoutn"),
+ MPP_FUNCTION(10, "synce2", "clk")),
+ MPP_MODE(10,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "readyn"),
+ MPP_FUNCTION(3, "ge0", "txctl"),
+ MPP_FUNCTION(4, "spi0", "miso"),
+ MPP_FUNCTION(5, "spi1", "miso"),
+ MPP_FUNCTION(6, "uart0", "cts"),
+ MPP_FUNCTION(7, "sata1", "present_act")),
+ MPP_MODE(11,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "wen1"),
+ MPP_FUNCTION(3, "ge0", "txclkout"),
+ MPP_FUNCTION(4, "spi0", "clk"),
+ MPP_FUNCTION(5, "spi1", "clk"),
+ MPP_FUNCTION(6, "uart0", "rts"),
+ MPP_FUNCTION(7, "led", "clk"),
+ MPP_FUNCTION(8, "uart2", "txd"),
+ MPP_FUNCTION(9, "sata0", "present_act")),
+ MPP_MODE(12,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "clk_out"),
+ MPP_FUNCTION(2, "nf", "rbn1"),
+ MPP_FUNCTION(3, "spi1", "csn1"),
+ MPP_FUNCTION(4, "ge0", "rxclk")),
+ MPP_MODE(13,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "burstn"),
+ MPP_FUNCTION(2, "nf", "rbn0"),
+ MPP_FUNCTION(3, "spi1", "miso"),
+ MPP_FUNCTION(4, "ge0", "rxctl"),
+ MPP_FUNCTION(8, "mss_spi", "miso")),
+ MPP_MODE(14,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "bootcsn"),
+ MPP_FUNCTION(2, "dev", "csn0"),
+ MPP_FUNCTION(3, "spi1", "csn0"),
+ MPP_FUNCTION(4, "spi0", "csn3"),
+ MPP_FUNCTION(5, "au", "i2sextclk"),
+ MPP_FUNCTION(6, "spi0", "miso"),
+ MPP_FUNCTION(7, "sata0", "present_act"),
+ MPP_FUNCTION(8, "mss_spi", "csn")),
+ MPP_MODE(15,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad7"),
+ MPP_FUNCTION(3, "spi1", "mosi"),
+ MPP_FUNCTION(6, "spi0", "mosi"),
+ MPP_FUNCTION(8, "mss_spi", "mosi"),
+ MPP_FUNCTION(11, "ptp", "pulse_cp2cp")),
+ MPP_MODE(16,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad6"),
+ MPP_FUNCTION(3, "spi1", "clk"),
+ MPP_FUNCTION(8, "mss_spi", "clk")),
+ MPP_MODE(17,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad5"),
+ MPP_FUNCTION(4, "ge0", "txd3")),
+ MPP_MODE(18,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad4"),
+ MPP_FUNCTION(4, "ge0", "txd2"),
+ MPP_FUNCTION(11, "ptp", "clk_cp2cp")),
+ MPP_MODE(19,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad3"),
+ MPP_FUNCTION(4, "ge0", "txd1"),
+ MPP_FUNCTION(11, "wakeup", "out_cp2cp")),
+ MPP_MODE(20,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad2"),
+ MPP_FUNCTION(4, "ge0", "txd0")),
+ MPP_MODE(21,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad1"),
+ MPP_FUNCTION(4, "ge0", "txctl"),
+ MPP_FUNCTION(11, "sei", "in_cp2cp")),
+ MPP_MODE(22,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "ad0"),
+ MPP_FUNCTION(4, "ge0", "txclkout"),
+ MPP_FUNCTION(11, "wakeup", "in_cp2cp")),
+ MPP_MODE(23,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "a1"),
+ MPP_FUNCTION(5, "au", "i2smclk"),
+ MPP_FUNCTION(11, "link", "rd_in_cp2cp")),
+ MPP_MODE(24,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "a0"),
+ MPP_FUNCTION(5, "au", "i2slrclk")),
+ MPP_MODE(25,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "oen"),
+ MPP_FUNCTION(5, "au", "i2sdo_spdifo")),
+ MPP_MODE(26,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "wen0"),
+ MPP_FUNCTION(5, "au", "i2sbclk")),
+ MPP_MODE(27,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "csn0"),
+ MPP_FUNCTION(2, "spi1", "miso"),
+ MPP_FUNCTION(3, "mss_gpio4", NULL),
+ MPP_FUNCTION(4, "ge0", "rxd3"),
+ MPP_FUNCTION(5, "spi0", "csn4"),
+ MPP_FUNCTION(8, "ge", "mdio"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "uart0", "rts"),
+ MPP_FUNCTION(11, "rei", "in_cp2cp")),
+ MPP_MODE(28,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "csn1"),
+ MPP_FUNCTION(2, "spi1", "csn0"),
+ MPP_FUNCTION(3, "mss_gpio5", NULL),
+ MPP_FUNCTION(4, "ge0", "rxd2"),
+ MPP_FUNCTION(5, "spi0", "csn5"),
+ MPP_FUNCTION(6, "pcie2", "clkreq"),
+ MPP_FUNCTION(7, "ptp", "pulse"),
+ MPP_FUNCTION(8, "ge", "mdc"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "uart0", "cts"),
+ MPP_FUNCTION(11, "led", "data")),
+ MPP_MODE(29,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "csn2"),
+ MPP_FUNCTION(2, "spi1", "mosi"),
+ MPP_FUNCTION(3, "mss_gpio6", NULL),
+ MPP_FUNCTION(4, "ge0", "rxd1"),
+ MPP_FUNCTION(5, "spi0", "csn6"),
+ MPP_FUNCTION(6, "pcie1", "clkreq"),
+ MPP_FUNCTION(7, "ptp", "clk"),
+ MPP_FUNCTION(8, "mss_i2c", "sda"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "uart0", "rxd"),
+ MPP_FUNCTION(11, "led", "stb")),
+ MPP_MODE(30,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "csn3"),
+ MPP_FUNCTION(2, "spi1", "clk"),
+ MPP_FUNCTION(3, "mss_gpio7", NULL),
+ MPP_FUNCTION(4, "ge0", "rxd0"),
+ MPP_FUNCTION(5, "spi0", "csn7"),
+ MPP_FUNCTION(6, "pcie0", "clkreq"),
+ MPP_FUNCTION(7, "ptp", "pclk_out"),
+ MPP_FUNCTION(8, "mss_i2c", "sck"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "uart0", "txd"),
+ MPP_FUNCTION(11, "led", "clk")),
+ MPP_MODE(31,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "dev", "a2"),
+ MPP_FUNCTION(3, "mss_gpio4", NULL),
+ MPP_FUNCTION(6, "pcie", "rstoutn"),
+ MPP_FUNCTION(8, "ge", "mdc")),
+ MPP_MODE(32,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mii", "col"),
+ MPP_FUNCTION(2, "mii", "txerr"),
+ MPP_FUNCTION(3, "mss_spi", "miso"),
+ MPP_FUNCTION(4, "tdm", "drx"),
+ MPP_FUNCTION(5, "au", "i2sextclk"),
+ MPP_FUNCTION(6, "au", "i2sdi"),
+ MPP_FUNCTION(7, "ge", "mdio"),
+ MPP_FUNCTION(8, "sdio", "v18_en"),
+ MPP_FUNCTION(9, "pcie1", "clkreq"),
+ MPP_FUNCTION(10, "mss_gpio0", NULL)),
+ MPP_MODE(33,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mii", "txclk"),
+ MPP_FUNCTION(2, "sdio", "pwr10"),
+ MPP_FUNCTION(3, "mss_spi", "csn"),
+ MPP_FUNCTION(4, "tdm", "fsync"),
+ MPP_FUNCTION(5, "au", "i2smclk"),
+ MPP_FUNCTION(6, "sdio", "bus_pwr"),
+ MPP_FUNCTION(8, "xg", "mdio"),
+ MPP_FUNCTION(9, "pcie2", "clkreq"),
+ MPP_FUNCTION(10, "mss_gpio1", NULL)),
+ MPP_MODE(34,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mii", "rxerr"),
+ MPP_FUNCTION(2, "sdio", "pwr11"),
+ MPP_FUNCTION(3, "mss_spi", "mosi"),
+ MPP_FUNCTION(4, "tdm", "dtx"),
+ MPP_FUNCTION(5, "au", "i2slrclk"),
+ MPP_FUNCTION(6, "sdio", "wr_protect"),
+ MPP_FUNCTION(7, "ge", "mdc"),
+ MPP_FUNCTION(9, "pcie0", "clkreq"),
+ MPP_FUNCTION(10, "mss_gpio2", NULL)),
+ MPP_MODE(35,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sata1", "present_act"),
+ MPP_FUNCTION(2, "i2c1", "sda"),
+ MPP_FUNCTION(3, "mss_spi", "clk"),
+ MPP_FUNCTION(4, "tdm", "pclk"),
+ MPP_FUNCTION(5, "au", "i2sdo_spdifo"),
+ MPP_FUNCTION(6, "sdio", "card_detect"),
+ MPP_FUNCTION(7, "xg", "mdio"),
+ MPP_FUNCTION(8, "ge", "mdio"),
+ MPP_FUNCTION(9, "pcie", "rstoutn"),
+ MPP_FUNCTION(10, "mss_gpio3", NULL)),
+ MPP_MODE(36,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "synce2", "clk"),
+ MPP_FUNCTION(2, "i2c1", "sck"),
+ MPP_FUNCTION(3, "ptp", "clk"),
+ MPP_FUNCTION(4, "synce1", "clk"),
+ MPP_FUNCTION(5, "au", "i2sbclk"),
+ MPP_FUNCTION(6, "sata0", "present_act"),
+ MPP_FUNCTION(7, "xg", "mdc"),
+ MPP_FUNCTION(8, "ge", "mdc"),
+ MPP_FUNCTION(9, "pcie2", "clkreq"),
+ MPP_FUNCTION(10, "mss_gpio5", NULL)),
+ MPP_MODE(37,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "uart2", "rxd"),
+ MPP_FUNCTION(2, "i2c0", "sck"),
+ MPP_FUNCTION(3, "ptp", "pclk_out"),
+ MPP_FUNCTION(4, "tdm", "intn"),
+ MPP_FUNCTION(5, "mss_i2c", "sck"),
+ MPP_FUNCTION(6, "sata1", "present_act"),
+ MPP_FUNCTION(7, "ge", "mdc"),
+ MPP_FUNCTION(8, "xg", "mdc"),
+ MPP_FUNCTION(9, "pcie1", "clkreq"),
+ MPP_FUNCTION(10, "mss_gpio6", NULL),
+ MPP_FUNCTION(11, "link", "rd_out_cp2cp")),
+ MPP_MODE(38,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "uart2", "txd"),
+ MPP_FUNCTION(2, "i2c0", "sda"),
+ MPP_FUNCTION(3, "ptp", "pulse"),
+ MPP_FUNCTION(4, "tdm", "rstn"),
+ MPP_FUNCTION(5, "mss_i2c", "sda"),
+ MPP_FUNCTION(6, "sata0", "present_act"),
+ MPP_FUNCTION(7, "ge", "mdio"),
+ MPP_FUNCTION(8, "xg", "mdio"),
+ MPP_FUNCTION(9, "au", "i2sextclk"),
+ MPP_FUNCTION(10, "mss_gpio7", NULL),
+ MPP_FUNCTION(11, "ptp", "pulse_cp2cp")),
+ MPP_MODE(39,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "wr_protect"),
+ MPP_FUNCTION(4, "au", "i2sbclk"),
+ MPP_FUNCTION(5, "ptp", "clk"),
+ MPP_FUNCTION(6, "spi0", "csn1"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "mss_gpio0", NULL)),
+ MPP_MODE(40,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "pwr11"),
+ MPP_FUNCTION(2, "synce1", "clk"),
+ MPP_FUNCTION(3, "mss_i2c", "sda"),
+ MPP_FUNCTION(4, "au", "i2sdo_spdifo"),
+ MPP_FUNCTION(5, "ptp", "pclk_out"),
+ MPP_FUNCTION(6, "spi0", "clk"),
+ MPP_FUNCTION(7, "uart1", "txd"),
+ MPP_FUNCTION(8, "ge", "mdio"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "mss_gpio1", NULL)),
+ MPP_MODE(41,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "pwr10"),
+ MPP_FUNCTION(2, "sdio", "bus_pwr"),
+ MPP_FUNCTION(3, "mss_i2c", "sck"),
+ MPP_FUNCTION(4, "au", "i2slrclk"),
+ MPP_FUNCTION(5, "ptp", "pulse"),
+ MPP_FUNCTION(6, "spi0", "mosi"),
+ MPP_FUNCTION(7, "uart1", "rxd"),
+ MPP_FUNCTION(8, "ge", "mdc"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "mss_gpio2", NULL),
+ MPP_FUNCTION(11, "rei", "out_cp2cp")),
+ MPP_MODE(42,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "v18_en"),
+ MPP_FUNCTION(2, "sdio", "wr_protect"),
+ MPP_FUNCTION(3, "synce2", "clk"),
+ MPP_FUNCTION(4, "au", "i2smclk"),
+ MPP_FUNCTION(5, "mss_uart", "txd"),
+ MPP_FUNCTION(6, "spi0", "miso"),
+ MPP_FUNCTION(7, "uart1", "cts"),
+ MPP_FUNCTION(8, "xg", "mdc"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "mss_gpio4", NULL)),
+ MPP_MODE(43,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "sdio", "card_detect"),
+ MPP_FUNCTION(3, "synce1", "clk"),
+ MPP_FUNCTION(4, "au", "i2sextclk"),
+ MPP_FUNCTION(5, "mss_uart", "rxd"),
+ MPP_FUNCTION(6, "spi0", "csn0"),
+ MPP_FUNCTION(7, "uart1", "rts"),
+ MPP_FUNCTION(8, "xg", "mdio"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "mss_gpio5", NULL),
+ MPP_FUNCTION(11, "wakeup", "out_cp2cp")),
+ MPP_MODE(44,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txd2"),
+ MPP_FUNCTION(7, "uart0", "rts"),
+ MPP_FUNCTION(11, "ptp", "clk_cp2cp")),
+ MPP_MODE(45,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txd3"),
+ MPP_FUNCTION(7, "uart0", "txd"),
+ MPP_FUNCTION(9, "pcie", "rstoutn")),
+ MPP_MODE(46,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txd1"),
+ MPP_FUNCTION(7, "uart1", "rts")),
+ MPP_MODE(47,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txd0"),
+ MPP_FUNCTION(5, "spi1", "clk"),
+ MPP_FUNCTION(7, "uart1", "txd"),
+ MPP_FUNCTION(8, "ge", "mdc")),
+ MPP_MODE(48,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txctl_txen"),
+ MPP_FUNCTION(5, "spi1", "mosi"),
+ MPP_FUNCTION(8, "xg", "mdc"),
+ MPP_FUNCTION(11, "wakeup", "in_cp2cp")),
+ MPP_MODE(49,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "txclkout"),
+ MPP_FUNCTION(2, "mii", "crs"),
+ MPP_FUNCTION(5, "spi1", "miso"),
+ MPP_FUNCTION(7, "uart1", "rxd"),
+ MPP_FUNCTION(8, "ge", "mdio"),
+ MPP_FUNCTION(9, "pcie0", "clkreq"),
+ MPP_FUNCTION(10, "sdio", "v18_en"),
+ MPP_FUNCTION(11, "sei", "out_cp2cp")),
+ MPP_MODE(50,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxclk"),
+ MPP_FUNCTION(2, "mss_i2c", "sda"),
+ MPP_FUNCTION(5, "spi1", "csn0"),
+ MPP_FUNCTION(6, "uart2", "txd"),
+ MPP_FUNCTION(7, "uart0", "rxd"),
+ MPP_FUNCTION(8, "xg", "mdio"),
+ MPP_FUNCTION(10, "sdio", "pwr11")),
+ MPP_MODE(51,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxd0"),
+ MPP_FUNCTION(2, "mss_i2c", "sck"),
+ MPP_FUNCTION(5, "spi1", "csn1"),
+ MPP_FUNCTION(6, "uart2", "rxd"),
+ MPP_FUNCTION(7, "uart0", "cts"),
+ MPP_FUNCTION(10, "sdio", "pwr10")),
+ MPP_MODE(52,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxd1"),
+ MPP_FUNCTION(2, "synce1", "clk"),
+ MPP_FUNCTION(4, "synce2", "clk"),
+ MPP_FUNCTION(5, "spi1", "csn2"),
+ MPP_FUNCTION(7, "uart1", "cts"),
+ MPP_FUNCTION(8, "led", "clk"),
+ MPP_FUNCTION(9, "pcie", "rstoutn"),
+ MPP_FUNCTION(10, "pcie0", "clkreq")),
+ MPP_MODE(53,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxd2"),
+ MPP_FUNCTION(3, "ptp", "clk"),
+ MPP_FUNCTION(5, "spi1", "csn3"),
+ MPP_FUNCTION(7, "uart1", "rxd"),
+ MPP_FUNCTION(8, "led", "stb"),
+ MPP_FUNCTION(11, "sdio", "led")),
+ MPP_MODE(54,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxd3"),
+ MPP_FUNCTION(2, "synce2", "clk"),
+ MPP_FUNCTION(3, "ptp", "pclk_out"),
+ MPP_FUNCTION(4, "synce1", "clk"),
+ MPP_FUNCTION(8, "led", "data"),
+ MPP_FUNCTION(10, "sdio", "hw_rst"),
+ MPP_FUNCTION(11, "sdio", "wr_protect")),
+ MPP_MODE(55,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "ge1", "rxctl_rxdv"),
+ MPP_FUNCTION(3, "ptp", "pulse"),
+ MPP_FUNCTION(10, "sdio", "led"),
+ MPP_FUNCTION(11, "sdio", "card_detect")),
+ MPP_MODE(56,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(4, "tdm", "drx"),
+ MPP_FUNCTION(5, "au", "i2sdo_spdifo"),
+ MPP_FUNCTION(6, "spi0", "clk"),
+ MPP_FUNCTION(7, "uart1", "rxd"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(14, "sdio", "clk")),
+ MPP_MODE(57,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(2, "mss_i2c", "sda"),
+ MPP_FUNCTION(3, "ptp", "pclk_out"),
+ MPP_FUNCTION(4, "tdm", "intn"),
+ MPP_FUNCTION(5, "au", "i2sbclk"),
+ MPP_FUNCTION(6, "spi0", "mosi"),
+ MPP_FUNCTION(7, "uart1", "txd"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(14, "sdio", "cmd")),
+ MPP_MODE(58,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(2, "mss_i2c", "sck"),
+ MPP_FUNCTION(3, "ptp", "clk"),
+ MPP_FUNCTION(4, "tdm", "rstn"),
+ MPP_FUNCTION(5, "au", "i2sdi"),
+ MPP_FUNCTION(6, "spi0", "miso"),
+ MPP_FUNCTION(7, "uart1", "cts"),
+ MPP_FUNCTION(8, "led", "clk"),
+ MPP_FUNCTION(14, "sdio", "d0")),
+ MPP_MODE(59,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mss_gpio7", NULL),
+ MPP_FUNCTION(2, "synce2", "clk"),
+ MPP_FUNCTION(4, "tdm", "fsync"),
+ MPP_FUNCTION(5, "au", "i2slrclk"),
+ MPP_FUNCTION(6, "spi0", "csn0"),
+ MPP_FUNCTION(7, "uart0", "cts"),
+ MPP_FUNCTION(8, "led", "stb"),
+ MPP_FUNCTION(9, "uart1", "txd"),
+ MPP_FUNCTION(14, "sdio", "d1")),
+ MPP_MODE(60,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mss_gpio6", NULL),
+ MPP_FUNCTION(3, "ptp", "pulse"),
+ MPP_FUNCTION(4, "tdm", "dtx"),
+ MPP_FUNCTION(5, "au", "i2smclk"),
+ MPP_FUNCTION(6, "spi0", "csn1"),
+ MPP_FUNCTION(7, "uart0", "rts"),
+ MPP_FUNCTION(8, "led", "data"),
+ MPP_FUNCTION(9, "uart1", "rxd"),
+ MPP_FUNCTION(14, "sdio", "d2")),
+ MPP_MODE(61,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mss_gpio5", NULL),
+ MPP_FUNCTION(3, "ptp", "clk"),
+ MPP_FUNCTION(4, "tdm", "pclk"),
+ MPP_FUNCTION(5, "au", "i2sextclk"),
+ MPP_FUNCTION(6, "spi0", "csn2"),
+ MPP_FUNCTION(7, "uart0", "txd"),
+ MPP_FUNCTION(8, "uart2", "txd"),
+ MPP_FUNCTION(9, "sata1", "present_act"),
+ MPP_FUNCTION(10, "ge", "mdio"),
+ MPP_FUNCTION(14, "sdio", "d3")),
+ MPP_MODE(62,
+ MPP_FUNCTION(0, "gpio", NULL),
+ MPP_FUNCTION(1, "mss_gpio4", NULL),
+ MPP_FUNCTION(2, "synce1", "clk"),
+ MPP_FUNCTION(3, "ptp", "pclk_out"),
+ MPP_FUNCTION(5, "sata1", "present_act"),
+ MPP_FUNCTION(6, "spi0", "csn3"),
+ MPP_FUNCTION(7, "uart0", "rxd"),
+ MPP_FUNCTION(8, "uart2", "rxd"),
+ MPP_FUNCTION(9, "sata0", "present_act"),
+ MPP_FUNCTION(10, "ge", "mdc")),
+};
+
+static const struct of_device_id armada_cp110_pinctrl_of_match[] = {
+ {
+ .compatible = "marvell,armada-7k-pinctrl",
+ .data = (void *) V_ARMADA_7K,
+ },
+ {
+ .compatible = "marvell,armada-8k-cpm-pinctrl",
+ .data = (void *) V_ARMADA_8K_CPM,
+ },
+ {
+ .compatible = "marvell,armada-8k-cps-pinctrl",
+ .data = (void *) V_ARMADA_8K_CPS,
+ },
+ { },
+};
+
+static const struct mvebu_mpp_ctrl armada_cp110_mpp_controls[] = {
+ MPP_FUNC_CTRL(0, 62, NULL, mvebu_regmap_mpp_ctrl),
+};
+
+static void mvebu_pinctrl_assign_variant(struct mvebu_mpp_mode *m,
+ u8 variant)
+{
+ struct mvebu_mpp_ctrl_setting *s;
+
+ for (s = m->settings ; s->name ; s++)
+ s->variant = variant;
+}
+
+static int armada_cp110_pinctrl_probe(struct platform_device *pdev)
+{
+ struct mvebu_pinctrl_soc_info *soc;
+ const struct of_device_id *match =
+ of_match_device(armada_cp110_pinctrl_of_match, &pdev->dev);
+ int i;
+
+ if (!pdev->dev.parent)
+ return -ENODEV;
+
+ soc = devm_kzalloc(&pdev->dev,
+ sizeof(struct mvebu_pinctrl_soc_info), GFP_KERNEL);
+ if (!soc)
+ return -ENOMEM;
+
+ soc->variant = (unsigned long) match->data & 0xff;
+ soc->controls = armada_cp110_mpp_controls;
+ soc->ncontrols = ARRAY_SIZE(armada_cp110_mpp_controls);
+ soc->modes = armada_cp110_mpp_modes;
+ soc->nmodes = ARRAY_SIZE(armada_cp110_mpp_modes);
+ for (i = 0; i < ARRAY_SIZE(armada_cp110_mpp_modes); i++) {
+ struct mvebu_mpp_mode *m = &armada_cp110_mpp_modes[i];
+
+ switch (i) {
+ case 0 ... 31:
+ mvebu_pinctrl_assign_variant(m, V_ARMADA_7K_8K_CPS);
+ break;
+ case 32 ... 38:
+ mvebu_pinctrl_assign_variant(m, V_ARMADA_7K_8K_CPM);
+ break;
+ case 39 ... 43:
+ mvebu_pinctrl_assign_variant(m, V_ARMADA_8K_CPM);
+ break;
+ case 44 ... 62:
+ mvebu_pinctrl_assign_variant(m, V_ARMADA_7K_8K_CPM);
+ break;
+ }
+ }
+ pdev->dev.platform_data = soc;
+
+ return mvebu_pinctrl_simple_regmap_probe(pdev, pdev->dev.parent, 0);
+}
+
+static struct platform_driver armada_cp110_pinctrl_driver = {
+ .driver = {
+ .name = "armada-cp110-pinctrl",
+ .of_match_table = of_match_ptr(armada_cp110_pinctrl_of_match),
+ },
+ .probe = armada_cp110_pinctrl_probe,
+};
+
+builtin_platform_driver(armada_cp110_pinctrl_driver);
--
git-series 0.9.1
Enable pinctrl support for CP and AP on the Armada 7K/8K SoCs.
The CP master being different between Armada 7k and Armada 8k. This
commit introduces the intermediates files armada-70x0.dtsi and
armada-80x0.dtsi.
These new files will provide different compatible strings depending of
the SoC family. They will also be the location for the pinmux
configuration at the SoC level.
Signed-off-by: Gregory CLEMENT <[email protected]>
---
arch/arm64/boot/dts/marvell/armada-7020.dtsi | 2 +-
arch/arm64/boot/dts/marvell/armada-7040.dtsi | 2 +-
arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 53 ++++++++++++++++++-
arch/arm64/boot/dts/marvell/armada-8020.dtsi | 3 +-
arch/arm64/boot/dts/marvell/armada-8040.dtsi | 3 +-
arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 60 ++++++++++++++++++++-
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 4 +-
7 files changed, 121 insertions(+), 6 deletions(-)
create mode 100644 arch/arm64/boot/dts/marvell/armada-70x0.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/armada-80x0.dtsi
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
index 975e73302753..4ab012991d9d 100644
--- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -46,7 +46,7 @@
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7020";
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 78d995d62707..cbe460b8fc00 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -46,7 +46,7 @@
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
+#include "armada-70x0.dtsi"
/ {
model = "Marvell Armada 7040";
diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
new file mode 100644
index 000000000000..f6c22665d091
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 70x0 SoC
+ */
+
+#include "armada-cp110-master.dtsi"
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-7k-pinctrl";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
index 7c08f1f28d9e..0ba0bc942598 100644
--- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -46,8 +46,7 @@
*/
#include "armada-ap806-dual.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8020";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 33813a75bc30..60fe84f5cbcc 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -46,8 +46,7 @@
*/
#include "armada-ap806-quad.dtsi"
-#include "armada-cp110-master.dtsi"
-#include "armada-cp110-slave.dtsi"
+#include "armada-80x0.dtsi"
/ {
model = "Marvell Armada 8040";
diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
new file mode 100644
index 000000000000..93d1de03b39a
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 80x0 SoC family
+ */
+
+#include "armada-cp110-master.dtsi"
+#include "armada-cp110-slave.dtsi"
+
+&cpm_syscon0 {
+ cpm_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cpm-pinctrl";
+ };
+};
+
+&cps_syscon0 {
+ cps_pinctrl: pinctrl {
+ compatible = "marvell,armada-8k-cps-pinctrl";
+ };
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index ff1964d314de..c6c30143eb29 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -252,6 +252,10 @@
compatible = "marvell,ap806-clock";
#clock-cells = <1>;
};
+
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
+ };
};
};
};
--
git-series 0.9.1
This commit makes sure the drivers for the Armada 7K/8K pin controllers
are enabled.
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
arch/arm64/Kconfig.platforms | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index b4e919ac73f6..c8fc2e7f0152 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -113,6 +113,8 @@ config ARCH_MVEBU
select OF_GPIO
select PINCTRL
select PINCTRL_ARMADA_37XX
+ select PINCTRL_ARMADA_AP806
+ select PINCTRL_ARMADA_CP110
help
This enables support for Marvell EBU familly, including:
- Armada 3700 SoC Family
--
git-series 0.9.1
From: Russell King <[email protected]>
Armada 8040 also needs orion pinctrl, and as these symbols are only
selected, there's no need to make them depend on PLAT_ORION.
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
drivers/pinctrl/mvebu/Kconfig | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index 5bade32d3089..8cb444b60ae9 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -1,5 +1,3 @@
-if PLAT_ORION
-
config PINCTRL_MVEBU
bool
select PINMUX
@@ -38,8 +36,6 @@ config PINCTRL_ORION
bool
select PINCTRL_MVEBU
-endif
-
config PINCTRL_ARMADA_37XX
bool
select GENERIC_PINCONF
--
git-series 0.9.1
The offset property of the pinctrl node, when a regmap is used in the
device tree, was never used nor documented in the binding. Moreover, the
compatible string is enough to let the driver know which offset using.
So this patch removes the property and move the information at the driver
level.
Reviewed-by: Thomas Petazzoni <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
drivers/pinctrl/mvebu/pinctrl-mvebu.c | 6 +-----
drivers/pinctrl/mvebu/pinctrl-mvebu.h | 2 +-
2 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
index e4dda12d371a..163d4614b0f8 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -810,21 +810,17 @@ int mvebu_regmap_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data,
}
int mvebu_pinctrl_simple_regmap_probe(struct platform_device *pdev,
- struct device *syscon_dev)
+ struct device *syscon_dev, u32 offset)
{
struct mvebu_pinctrl_soc_info *soc = dev_get_platdata(&pdev->dev);
struct mvebu_mpp_ctrl_data *mpp_data;
struct regmap *regmap;
- u32 offset;
int i;
regmap = syscon_node_to_regmap(syscon_dev->of_node);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- if (of_property_read_u32(pdev->dev.of_node, "offset", &offset))
- return -EINVAL;
-
mpp_data = devm_kcalloc(&pdev->dev, soc->ncontrols, sizeof(*mpp_data),
GFP_KERNEL);
if (!mpp_data)
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
index c90704e74884..75bba436bf59 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.h
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
@@ -210,6 +210,6 @@ int mvebu_regmap_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid,
int mvebu_pinctrl_probe(struct platform_device *pdev);
int mvebu_pinctrl_simple_mmio_probe(struct platform_device *pdev);
int mvebu_pinctrl_simple_regmap_probe(struct platform_device *pdev,
- struct device *syscon_dev);
+ struct device *syscon_dev, u32 offset);
#endif
--
git-series 0.9.1
Document the device tree binding for the pin controllers found on the
Armada 7K and Armada 8K SoCs.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt | 53 ++++++++++++++++++++++++++++++++++++++++++++++-------
1 file changed, 46 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
index 888c50e0d64f..4228d158fb31 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
@@ -28,14 +28,53 @@ Required properties:
- compatible: must be: "marvell,ap806-clock"
- #clock-cells: must be set to 1
+Pinctrl:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
+
+Required properties:
+- compatible must be "marvell,ap806-pinctrl",
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, sdio(clk), spi0(clk)
+mpp1 1 gpio, sdio(cmd), spi0(miso)
+mpp2 2 gpio, sdio(d0), spi0(mosi)
+mpp3 3 gpio, sdio(d1), spi0(cs0n)
+mpp4 4 gpio, sdio(d2), i2c0(sda)
+mpp5 5 gpio, sdio(d3), i2c0(sdk)
+mpp6 6 gpio, sdio(ds)
+mpp7 7 gpio, sdio(d4), uart1(rxd)
+mpp8 8 gpio, sdio(d5), uart1(txd)
+mpp9 9 gpio, sdio(d6), spi0(cs1n)
+mpp10 10 gpio, sdio(d7)
+mpp11 11 gpio, uart0(txd)
+mpp12 12 gpio, sdio(pw_off), sdio(hw_rst)
+mpp13 13 gpio
+mpp14 14 gpio
+mpp15 15 gpio
+mpp16 16 gpio
+mpp17 17 gpio
+mpp18 18 gpio
+mpp19 19 gpio, uart0(rxd), sdio(pw_off)
+
Example:
+ap_syscon: system-controller@6f4000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f4000 0x1000>;
- syscon: system-controller@6f4000 {
- compatible = "syscon", "simple-mfd";
- reg = <0x6f4000 0x1000>;
+ ap_clk: clock {
+ compatible = "marvell,ap806-clock";
+ #clock-cells = <1>;
+ };
- ap_clk: clock {
- compatible = "marvell,ap806-clock";
- #clock-cells = <1>;
- };
+ ap_pinctrl: pinctrl {
+ compatible = "marvell,ap806-pinctrl";
};
+};
--
git-series 0.9.1
On Fri, Jun 02, 2017 at 04:23:16PM +0200, Gregory CLEMENT wrote:
> Document the device tree binding for the gpio controllers found on the
> Marvell Armada 7K and Armada 8K SoCs.
>
> Signed-off-by: Gregory CLEMENT <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt | 20 ++++++++++++++++++++
> Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt | 24 +++++++++++++++++++++++-
> Documentation/devicetree/bindings/gpio/gpio-mvebu.txt | 24 +++++++++++++++++-------
> 3 files changed, 60 insertions(+), 8 deletions(-)
Acked-by: Rob Herring <[email protected]>
On Fri, Jun 2, 2017 at 4:23 PM, Gregory CLEMENT
<[email protected]> wrote:
> Document the device tree binding for the pin controllers found on the
> Armada 7K and Armada 8K SoCs.
>
> Acked-by: Rob Herring <[email protected]>
> Signed-off-by: Gregory CLEMENT <[email protected]>
This patch does not apply to any of my branches, I have no clue
what tree you're basing this on.
I would prefer a series based on a pure v4.12-rc2 I think, as this
is what both the pin control and GPIO development branches
is based on, unless you have a better merge strategy to suggest?
I hope for the love of god that this does not also clash with the
PWM stuff that is patching around in the GPIO tree, if it does
I might very well throw up my hands and defer merging all of
this until the next kernel cycle past v4.13-rc1.
Please rebase on v4.12-rc2 and resend.
Yours,
Linus Walleij
Hi Linus,
On ven., juin 09 2017, Linus Walleij <[email protected]> wrote:
> On Fri, Jun 2, 2017 at 4:23 PM, Gregory CLEMENT
> <[email protected]> wrote:
>
>> Document the device tree binding for the pin controllers found on the
>> Armada 7K and Armada 8K SoCs.
>>
>> Acked-by: Rob Herring <[email protected]>
>> Signed-off-by: Gregory CLEMENT <[email protected]>
>
> This patch does not apply to any of my branches, I have no clue
> what tree you're basing this on.
>
> I would prefer a series based on a pure v4.12-rc2 I think, as this
> is what both the pin control and GPIO development branches
> is based on, unless you have a better merge strategy to suggest?
As I wrote in the cover letter :
"The patch modifying the documentation still depend on the ones of the
clk series. For the ap806 a first stable branch is already available:
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/log/?h=clk-ap806"
In the previous version of the series the clk maintainer said they will
provide stable branch for the documentation. For ap806 it is already
done, but not yet for cp110. But if you still have problem with it Rob
offer to take care of the devie tree documentation.
Just let us know what you prefer.
>
> I hope for the love of god that this does not also clash with the
> PWM stuff that is patching around in the GPIO tree, if it does
> I might very well throw up my hands and defer merging all of
> this until the next kernel cycle past v4.13-rc1.
To avoid this kind of issues the series are based on next-20170531 in
order to have in the same time the devel branch of the linux-gpio tree
and the devel branch of the linux-pinctrl tree.
>
> Please rebase on v4.12-rc2 and resend.
I use the linux-next tree because you already picked up some patches of
my first series and applied it on your devel branches. If I rebased on
v4;12-rc2, obviously it won't work. So really basing the series on your
devel branch is the best thing to do.
I saw that you already applied the PWM patch so as soon as they were
visible on the devel branches I will rebased the series on it and submit
it a new version.
Thanks,
Gregory
>
> Yours,
> Linus Walleij
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
On Fri, Jun 9, 2017 at 10:07 AM, Gregory CLEMENT
<[email protected]> wrote:
> As I wrote in the cover letter :
> "The patch modifying the documentation still depend on the ones of the
> clk series. For the ap806 a first stable branch is already available:
> https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/log/?h=clk-ap806"
Sorry I may miss things like that... usually it is better if patches
that depend on each other for merging are in the same series.
> In the previous version of the series the clk maintainer said they will
> provide stable branch for the documentation. For ap806 it is already
> done, but not yet for cp110. But if you still have problem with it Rob
> offer to take care of the devie tree documentation.
>
> Just let us know what you prefer.
I don't understand. Tell me what I need to do or we can just wait
a kernel cycle before merging this I guess.
Either I need an immutable branch or I merge the clock patches
I guess. Neither is very good but I'm open to compromises.
>> I hope for the love of god that this does not also clash with the
>> PWM stuff that is patching around in the GPIO tree, if it does
>> I might very well throw up my hands and defer merging all of
>> this until the next kernel cycle past v4.13-rc1.
>
> To avoid this kind of issues the series are based on next-20170531 in
> order to have in the same time the devel branch of the linux-gpio tree
> and the devel branch of the linux-pinctrl tree.
I see. Well if nothing else works, we just defer.
> I use the linux-next tree because you already picked up some patches of
> my first series and applied it on your devel branches. If I rebased on
> v4;12-rc2, obviously it won't work. So really basing the series on your
> devel branch is the best thing to do.
Indeed, sorry, the left hand doesn't know what the right hand is
doing sometimes.
> I saw that you already applied the PWM patch so as soon as they were
> visible on the devel branches I will rebased the series on it and submit
> it a new version.
OK
Yours,
Linus Walleij