When a kthread makes a call_usermodehelper() call the steps are:
a. allocates current->mm
b. load_elf_binary()
c. populates current->thread.regs
While doing this, interrupts are not disabled. If there is a perf
interrupt in the middle of this process (i.e. step 'a' has completed
but not yet reached to step 'c') and if perf tries to read userspace
regs, kernel oops with following log:
[ 131.217172] Unable to handle kernel paging request for data at address 0x00000000
[ 131.217731] Faulting instruction address: 0xc0000000000da0fc
...
[ 131.235555] Call Trace:
[ 131.235714] [c0000000bbaaad60] [c00000000025dedc] perf_output_sample_regs+0x6c/0xd0
[ 131.236020] [c0000000bbaaadb0] [c000000000269b44] perf_output_sample+0x4e4/0x830
[ 131.236362] [c0000000bbaaae40] [c00000000026a354] perf_event_output_forward+0x64/0x90
[ 131.236668] [c0000000bbaaaeb0] [c00000000026298c] __perf_event_overflow+0x8c/0x1e0
[ 131.236979] [c0000000bbaaaf00] [c0000000000dc330] record_and_restart+0x220/0x5c0
[ 131.237306] [c0000000bbaab230] [c0000000000dd1d8] perf_event_interrupt+0x2d8/0x4d0
[ 131.237611] [c0000000bbaab320] [c0000000000294a4] performance_monitor_exception+0x54/0x70
[ 131.237891] [c0000000bbaab350] [c00000000000a0a8] performance_monitor_common+0x158/0x160
[ 131.238208] --- interrupt: f01 at avtab_search_node+0x150/0x1a0
[ 131.238208] LR = avtab_search_node+0x100/0x1a0
[ 131.238617] [c0000000bbaab640] [c000000000526770] context_struct_compute_av+0x220/0x5b0 (unreliable)
[ 131.238948] [c0000000bbaab730] [c0000000005278b4] security_compute_av+0x174/0x390
[ 131.239231] [c0000000bbaab7e0] [c0000000005050e4] avc_compute_av+0x84/0x260
[ 131.239471] [c0000000bbaab890] [c000000000506198] avc_has_perm+0xf8/0x1c0
[ 131.239708] [c0000000bbaab980] [c00000000050f32c] file_has_perm+0x6c/0xd0
[ 131.239972] [c0000000bbaab9e0] [c0000000004ff0fc] security_mmap_file+0xac/0x140
[ 131.240256] [c0000000bbaaba50] [c0000000002b1fc0] vm_mmap_pgoff+0x80/0x160
[ 131.240532] [c0000000bbaabb30] [c0000000003f7db4] elf_map+0xa4/0x180
[ 131.240771] [c0000000bbaabb90] [c0000000003f9a48] load_elf_binary+0x6e8/0x15a0
[ 131.241060] [c0000000bbaabc90] [c000000000374f58] search_binary_handler+0xe8/0x290
[ 131.241347] [c0000000bbaabd20] [c000000000375c14] do_execveat_common.isra.14+0x5f4/0x840
[ 131.241631] [c0000000bbaabdf0] [c00000000010be70] call_usermodehelper_exec_async+0x170/0x210
[ 131.241955] [c0000000bbaabe30] [c00000000000bae0] ret_from_kernel_thread+0x5c/0x7c
Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
pt_regs are not set.
Signed-off-by: Ravi Bangoria <[email protected]>
---
Note: this should go to stable as well. I've not checked below 4.4
kernel but I'm able to reproduce it with 4.4 kernel.
arch/powerpc/perf/perf_regs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c
index cbd82fd..09ceea6 100644
--- a/arch/powerpc/perf/perf_regs.c
+++ b/arch/powerpc/perf/perf_regs.c
@@ -101,5 +101,6 @@ void perf_get_regs_user(struct perf_regs *regs_user,
struct pt_regs *regs_user_copy)
{
regs_user->regs = task_pt_regs(current);
- regs_user->abi = perf_reg_abi(current);
+ regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) :
+ PERF_SAMPLE_REGS_ABI_NONE;
}
--
2.9.4
On 2017/06/15 07:16PM, Ravi Bangoria wrote:
> When a kthread makes a call_usermodehelper() call the steps are:
> a. allocates current->mm
> b. load_elf_binary()
> c. populates current->thread.regs
>
> While doing this, interrupts are not disabled. If there is a perf
> interrupt in the middle of this process (i.e. step 'a' has completed
> but not yet reached to step 'c') and if perf tries to read userspace
> regs, kernel oops with following log:
>
> [ 131.217172] Unable to handle kernel paging request for data at address 0x00000000
> [ 131.217731] Faulting instruction address: 0xc0000000000da0fc
> ...
> [ 131.235555] Call Trace:
> [ 131.235714] [c0000000bbaaad60] [c00000000025dedc] perf_output_sample_regs+0x6c/0xd0
> [ 131.236020] [c0000000bbaaadb0] [c000000000269b44] perf_output_sample+0x4e4/0x830
> [ 131.236362] [c0000000bbaaae40] [c00000000026a354] perf_event_output_forward+0x64/0x90
> [ 131.236668] [c0000000bbaaaeb0] [c00000000026298c] __perf_event_overflow+0x8c/0x1e0
> [ 131.236979] [c0000000bbaaaf00] [c0000000000dc330] record_and_restart+0x220/0x5c0
> [ 131.237306] [c0000000bbaab230] [c0000000000dd1d8] perf_event_interrupt+0x2d8/0x4d0
> [ 131.237611] [c0000000bbaab320] [c0000000000294a4] performance_monitor_exception+0x54/0x70
> [ 131.237891] [c0000000bbaab350] [c00000000000a0a8] performance_monitor_common+0x158/0x160
> [ 131.238208] --- interrupt: f01 at avtab_search_node+0x150/0x1a0
> [ 131.238208] LR = avtab_search_node+0x100/0x1a0
> [ 131.238617] [c0000000bbaab640] [c000000000526770] context_struct_compute_av+0x220/0x5b0 (unreliable)
> [ 131.238948] [c0000000bbaab730] [c0000000005278b4] security_compute_av+0x174/0x390
> [ 131.239231] [c0000000bbaab7e0] [c0000000005050e4] avc_compute_av+0x84/0x260
> [ 131.239471] [c0000000bbaab890] [c000000000506198] avc_has_perm+0xf8/0x1c0
> [ 131.239708] [c0000000bbaab980] [c00000000050f32c] file_has_perm+0x6c/0xd0
> [ 131.239972] [c0000000bbaab9e0] [c0000000004ff0fc] security_mmap_file+0xac/0x140
> [ 131.240256] [c0000000bbaaba50] [c0000000002b1fc0] vm_mmap_pgoff+0x80/0x160
> [ 131.240532] [c0000000bbaabb30] [c0000000003f7db4] elf_map+0xa4/0x180
> [ 131.240771] [c0000000bbaabb90] [c0000000003f9a48] load_elf_binary+0x6e8/0x15a0
> [ 131.241060] [c0000000bbaabc90] [c000000000374f58] search_binary_handler+0xe8/0x290
> [ 131.241347] [c0000000bbaabd20] [c000000000375c14] do_execveat_common.isra.14+0x5f4/0x840
> [ 131.241631] [c0000000bbaabdf0] [c00000000010be70] call_usermodehelper_exec_async+0x170/0x210
> [ 131.241955] [c0000000bbaabe30] [c00000000000bae0] ret_from_kernel_thread+0x5c/0x7c
>
> Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
> pt_regs are not set.
So, this only shows up with --call-graph=dwarf. This should be:
Fixes: 17ed7c38427ff8 ("powerpc: Add HAVE_PERF_USER_STACK_DUMP support")
>
> Signed-off-by: Ravi Bangoria <[email protected]>
> ---
> Note: this should go to stable as well. I've not checked below 4.4
> kernel but I'm able to reproduce it with 4.4 kernel.
Hmm... are you sure it's the same issue? The above commit only went into
v4.7, which means we weren't able to use --call-graph=dwarf till v4.7.
Apart from that:
Acked-by: Naveen N. Rao <[email protected]>
- Naveen
>
> arch/powerpc/perf/perf_regs.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/perf/perf_regs.c b/arch/powerpc/perf/perf_regs.c
> index cbd82fd..09ceea6 100644
> --- a/arch/powerpc/perf/perf_regs.c
> +++ b/arch/powerpc/perf/perf_regs.c
> @@ -101,5 +101,6 @@ void perf_get_regs_user(struct perf_regs *regs_user,
> struct pt_regs *regs_user_copy)
> {
> regs_user->regs = task_pt_regs(current);
> - regs_user->abi = perf_reg_abi(current);
> + regs_user->abi = (regs_user->regs) ? perf_reg_abi(current) :
> + PERF_SAMPLE_REGS_ABI_NONE;
> }
> --
> 2.9.4
>
Thanks Naveen,
On Thursday 15 June 2017 08:57 PM, Naveen N. Rao wrote:
> Hmm... are you sure it's the same issue? The above commit only went into
> v4.7, which means we weren't able to use --call-graph=dwarf till v4.7.
Yes sorry. It's from v4.7 onwards.
-Ravi
Ravi Bangoria <[email protected]> writes:
> When a kthread makes a call_usermodehelper() call the steps are:
> a. allocates current->mm
> b. load_elf_binary()
> c. populates current->thread.regs
>
> While doing this, interrupts are not disabled. If there is a perf
> interrupt in the middle of this process (i.e. step 'a' has completed
> but not yet reached to step 'c') and if perf tries to read userspace
> regs, kernel oops with following log:
>
> [ 131.217172] Unable to handle kernel paging request for data at address 0x00000000
> [ 131.217731] Faulting instruction address: 0xc0000000000da0fc
> ...
> [ 131.235555] Call Trace:
> [ 131.235714] [c0000000bbaaad60] [c00000000025dedc] perf_output_sample_regs+0x6c/0xd0
> [ 131.236020] [c0000000bbaaadb0] [c000000000269b44] perf_output_sample+0x4e4/0x830
> [ 131.236362] [c0000000bbaaae40] [c00000000026a354] perf_event_output_forward+0x64/0x90
> [ 131.236668] [c0000000bbaaaeb0] [c00000000026298c] __perf_event_overflow+0x8c/0x1e0
> [ 131.236979] [c0000000bbaaaf00] [c0000000000dc330] record_and_restart+0x220/0x5c0
> [ 131.237306] [c0000000bbaab230] [c0000000000dd1d8] perf_event_interrupt+0x2d8/0x4d0
> [ 131.237611] [c0000000bbaab320] [c0000000000294a4] performance_monitor_exception+0x54/0x70
> [ 131.237891] [c0000000bbaab350] [c00000000000a0a8] performance_monitor_common+0x158/0x160
> [ 131.238208] --- interrupt: f01 at avtab_search_node+0x150/0x1a0
> [ 131.238208] LR = avtab_search_node+0x100/0x1a0
> [ 131.238617] [c0000000bbaab640] [c000000000526770] context_struct_compute_av+0x220/0x5b0 (unreliable)
> [ 131.238948] [c0000000bbaab730] [c0000000005278b4] security_compute_av+0x174/0x390
> [ 131.239231] [c0000000bbaab7e0] [c0000000005050e4] avc_compute_av+0x84/0x260
> [ 131.239471] [c0000000bbaab890] [c000000000506198] avc_has_perm+0xf8/0x1c0
> [ 131.239708] [c0000000bbaab980] [c00000000050f32c] file_has_perm+0x6c/0xd0
> [ 131.239972] [c0000000bbaab9e0] [c0000000004ff0fc] security_mmap_file+0xac/0x140
> [ 131.240256] [c0000000bbaaba50] [c0000000002b1fc0] vm_mmap_pgoff+0x80/0x160
> [ 131.240532] [c0000000bbaabb30] [c0000000003f7db4] elf_map+0xa4/0x180
> [ 131.240771] [c0000000bbaabb90] [c0000000003f9a48] load_elf_binary+0x6e8/0x15a0
> [ 131.241060] [c0000000bbaabc90] [c000000000374f58] search_binary_handler+0xe8/0x290
> [ 131.241347] [c0000000bbaabd20] [c000000000375c14] do_execveat_common.isra.14+0x5f4/0x840
> [ 131.241631] [c0000000bbaabdf0] [c00000000010be70] call_usermodehelper_exec_async+0x170/0x210
> [ 131.241955] [c0000000bbaabe30] [c00000000000bae0] ret_from_kernel_thread+0x5c/0x7c
>
> Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
> pt_regs are not set.
>
> Signed-off-by: Ravi Bangoria <[email protected]>
> ---
> Note: this should go to stable as well. I've not checked below 4.4
> kernel but I'm able to reproduce it with 4.4 kernel.
That function (perf_get_regs_user()) didn't exist until 4.7, ie:
ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state")
So there must be something else going on.
I'll hold off on merging this until we've worked it out.
cheers
Hi Michael,
On Friday 16 June 2017 10:42 AM, Michael Ellerman wrote:
>
> That function (perf_get_regs_user()) didn't exist until 4.7, ie:
>
> ed4a4ef85cf5 ("powerpc/perf: Add support for sampling interrupt register state")
>
> So there must be something else going on.
>
> I'll hold off on merging this until we've worked it out.
That was my mistake. It's v4.7 not v4.4.
Thanks,
Ravi
On Thu, 2017-06-15 at 13:46:48 UTC, Ravi Bangoria wrote:
> When a kthread makes a call_usermodehelper() call the steps are:
> a. allocates current->mm
> b. load_elf_binary()
> c. populates current->thread.regs
>
> While doing this, interrupts are not disabled. If there is a perf
> interrupt in the middle of this process (i.e. step 'a' has completed
> but not yet reached to step 'c') and if perf tries to read userspace
> regs, kernel oops with following log:
>
> [ 131.217172] Unable to handle kernel paging request for data at address 0x00000000
> [ 131.217731] Faulting instruction address: 0xc0000000000da0fc
> ...
> [ 131.235555] Call Trace:
> [ 131.235714] [c0000000bbaaad60] [c00000000025dedc] perf_output_sample_regs+0x6c/0xd0
> [ 131.236020] [c0000000bbaaadb0] [c000000000269b44] perf_output_sample+0x4e4/0x830
> [ 131.236362] [c0000000bbaaae40] [c00000000026a354] perf_event_output_forward+0x64/0x90
> [ 131.236668] [c0000000bbaaaeb0] [c00000000026298c] __perf_event_overflow+0x8c/0x1e0
> [ 131.236979] [c0000000bbaaaf00] [c0000000000dc330] record_and_restart+0x220/0x5c0
> [ 131.237306] [c0000000bbaab230] [c0000000000dd1d8] perf_event_interrupt+0x2d8/0x4d0
> [ 131.237611] [c0000000bbaab320] [c0000000000294a4] performance_monitor_exception+0x54/0x70
> [ 131.237891] [c0000000bbaab350] [c00000000000a0a8] performance_monitor_common+0x158/0x160
> [ 131.238208] --- interrupt: f01 at avtab_search_node+0x150/0x1a0
> [ 131.238208] LR = avtab_search_node+0x100/0x1a0
> [ 131.238617] [c0000000bbaab640] [c000000000526770] context_struct_compute_av+0x220/0x5b0 (unreliable)
> [ 131.238948] [c0000000bbaab730] [c0000000005278b4] security_compute_av+0x174/0x390
> [ 131.239231] [c0000000bbaab7e0] [c0000000005050e4] avc_compute_av+0x84/0x260
> [ 131.239471] [c0000000bbaab890] [c000000000506198] avc_has_perm+0xf8/0x1c0
> [ 131.239708] [c0000000bbaab980] [c00000000050f32c] file_has_perm+0x6c/0xd0
> [ 131.239972] [c0000000bbaab9e0] [c0000000004ff0fc] security_mmap_file+0xac/0x140
> [ 131.240256] [c0000000bbaaba50] [c0000000002b1fc0] vm_mmap_pgoff+0x80/0x160
> [ 131.240532] [c0000000bbaabb30] [c0000000003f7db4] elf_map+0xa4/0x180
> [ 131.240771] [c0000000bbaabb90] [c0000000003f9a48] load_elf_binary+0x6e8/0x15a0
> [ 131.241060] [c0000000bbaabc90] [c000000000374f58] search_binary_handler+0xe8/0x290
> [ 131.241347] [c0000000bbaabd20] [c000000000375c14] do_execveat_common.isra.14+0x5f4/0x840
> [ 131.241631] [c0000000bbaabdf0] [c00000000010be70] call_usermodehelper_exec_async+0x170/0x210
> [ 131.241955] [c0000000bbaabe30] [c00000000000bae0] ret_from_kernel_thread+0x5c/0x7c
>
> Fix it by setting abi to PERF_SAMPLE_REGS_ABI_NONE when userspace
> pt_regs are not set.
>
> Signed-off-by: Ravi Bangoria <[email protected]>
> Acked-by: Naveen N. Rao <[email protected]>
Applied to powerpc fixes, thanks.
https://git.kernel.org/powerpc/c/bf05fc25f268cd62f147f368fe65ad
cheers