Commit e4fda3a04275 ("serial: don't register CIR serial ports") adds a
check for PORT_8250_CIR to serial8250_register_8250_port(). But the code
isn't needed as the function never takes the branch when the port is CIR
serial port.
This patch deletes the dead code.
Signed-off-by: Matthias Brugger <[email protected]>
---
drivers/tty/serial/8250/8250_core.c | 23 ++++++-----------------
1 file changed, 6 insertions(+), 17 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 1aab3010fbfa..b5def356af63 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (uart->port.type != PORT_8250_CIR) {
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
-
- ret = uart_add_one_port(&serial8250_reg,
- &uart->port);
- if (ret == 0)
- ret = uart->port.line;
- } else {
- dev_info(uart->port.dev,
- "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
- uart->port.iobase,
- (unsigned long long)uart->port.mapbase,
- uart->port.irq);
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
- ret = 0;
- }
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
}
mutex_unlock(&serial_mutex);
--
2.12.3
On Fri, Jun 16, 2017 at 6:17 PM, Matthias Brugger <[email protected]> wrote:
> Commit e4fda3a04275 ("serial: don't register CIR serial ports") adds a
> check for PORT_8250_CIR to serial8250_register_8250_port(). But the code
> isn't needed as the function never takes the branch when the port is CIR
> serial port.
>
> This patch deletes the dead code.
Reviewed-by: Andy Shevchenko <[email protected]>
One comment below.
>
> Signed-off-by: Matthias Brugger <[email protected]>
> ---
> drivers/tty/serial/8250/8250_core.c | 23 ++++++-----------------
> 1 file changed, 6 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
> index 1aab3010fbfa..b5def356af63 100644
> --- a/drivers/tty/serial/8250/8250_core.c
> +++ b/drivers/tty/serial/8250/8250_core.c
> @@ -1043,24 +1043,13 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
> if (up->dl_write)
> uart->dl_write = up->dl_write;
>
> - if (uart->port.type != PORT_8250_CIR) {
> - if (serial8250_isa_config != NULL)
> - serial8250_isa_config(0, &uart->port,
> - &uart->capabilities);
> -
> - ret = uart_add_one_port(&serial8250_reg,
> - &uart->port);
> - if (ret == 0)
> - ret = uart->port.line;
> - } else {
> - dev_info(uart->port.dev,
> - "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
> - uart->port.iobase,
> - (unsigned long long)uart->port.mapbase,
> - uart->port.irq);
> + if (serial8250_isa_config != NULL)
> + serial8250_isa_config(0, &uart->port,
> + &uart->capabilities);
If it exceeds 80 by ~3 characters it's still okay from my p.o.v.
Nevertheless, it's your choice.
>
> - ret = 0;
> - }
> + ret = uart_add_one_port(&serial8250_reg, &uart->port);
> + if (ret == 0)
> + ret = uart->port.line;
> }
> mutex_unlock(&serial_mutex);
>
> --
> 2.12.3
>
--
With Best Regards,
Andy Shevchenko