This is the start of the stable review cycle for the 4.4.75 release.
There are 26 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Jun 29 12:45:11 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.75-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.75-rc1
Guilherme G. Piccoli <[email protected]>
nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
Guilherme G. Piccoli <[email protected]>
nvme/quirk: Add a delay before checking for adapter readiness
Russell King <[email protected]>
net: phy: fix marvell phy status reading
Yendapally Reddy Dhananjaya Reddy <[email protected]>
net: phy: Initialize mdio clock at probe function
William Wu <[email protected]>
usb: gadget: f_fs: avoid out of bounds access on comp_desc
Michael Ellerman <[email protected]>
powerpc/slb: Force a full SLB flush when we insert for a bad EA
Joël Esponde <[email protected]>
mtd: spi-nor: fix spansion quad enable
Tobias Wolf <[email protected]>
of: Add check to of_scan_flat_dt() before accessing initial_boot_params
David Howells <[email protected]>
rxrpc: Fix several cases where a padded len isn't checked in ticket decode
Johan Hovold <[email protected]>
USB: usbip: fix nonconforming hub descriptor
Alex Deucher <[email protected]>
drm/amdgpu: adjust default display clock
Alex Deucher <[email protected]>
drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
Alex Deucher <[email protected]>
drm/radeon: add a quirk for Toshiba Satellite L20-183
Alex Deucher <[email protected]>
drm/radeon: add a PX quirk for another K53TK variant
Nicholas Bellinger <[email protected]>
iscsi-target: Reject immediate data underflow larger than SCSI transfer length
Nicholas Bellinger <[email protected]>
target: Fix kref->refcount underflow in transport_cmd_finish_abort
John Stultz <[email protected]>
time: Fix clock->read(clock) race around clocksource changes
Daniel Drake <[email protected]>
Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
Naveen N. Rao <[email protected]>
powerpc/kprobes: Pause function_graph tracing during jprobes handling
Eric W. Biederman <[email protected]>
signal: Only reschedule timers on signals timers have sent
Sebastian Parschauer <[email protected]>
HID: Add quirk for Dell PIXART OEM mouse
Pavel Shilovsky <[email protected]>
CIFS: Improve readdir verbosity
Paul Mackerras <[email protected]>
KVM: PPC: Book3S HV: Preserve userspace HTM state properly
Ilya Matveychikov <[email protected]>
lib/cmdline.c: fix get_options() overflow while parsing ranges
NeilBrown <[email protected]>
autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
Kees Cook <[email protected]>
fs/exec.c: account for argv/envp pointers
-------------
Diffstat:
Makefile | 4 +-
arch/powerpc/kernel/kprobes.c | 11 +++++
arch/powerpc/kvm/book3s_hv.c | 21 +++++++++
arch/powerpc/mm/slb_low.S | 10 +++++
drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 4 ++
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c | 4 +-
drivers/gpu/drm/radeon/radeon_combios.c | 7 +++
drivers/gpu/drm/radeon/radeon_device.c | 4 ++
drivers/hid/hid-ids.h | 3 ++
drivers/hid/usbhid/hid-quirks.c | 1 +
drivers/input/serio/i8042-x86ia64io.h | 7 +++
drivers/mtd/spi-nor/spi-nor.c | 7 +++
drivers/net/phy/marvell.c | 2 -
drivers/net/phy/mdio-bcm-iproc.c | 6 +--
drivers/nvme/host/nvme.h | 7 +++
drivers/nvme/host/pci.c | 5 +++
drivers/of/fdt.c | 9 ++--
drivers/target/iscsi/iscsi_target.c | 12 ++++++
drivers/target/target_core_internal.h | 2 +-
drivers/target/target_core_tmr.c | 16 +++----
drivers/target/target_core_transport.c | 9 ++--
drivers/usb/gadget/function/f_fs.c | 10 ++---
drivers/usb/usbip/vhci_hcd.c | 11 +++--
fs/autofs4/dev-ioctl.c | 2 +-
fs/cifs/smb1ops.c | 9 +++-
fs/cifs/smb2ops.c | 4 +-
fs/exec.c | 28 ++++++++++--
include/linux/timekeeper_internal.h | 1 -
kernel/signal.c | 20 ++++++---
kernel/time/timekeeping.c | 47 ++++++++++++++------
lib/cmdline.c | 6 +--
net/rxrpc/ar-key.c | 64 +++++++++++++++-------------
32 files changed, 258 insertions(+), 95 deletions(-)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 4eb59793cca00b0e629b6d55b5abb5acb82c5868 upstream.
Disable PX on these systems.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_device.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -127,6 +127,10 @@ static struct radeon_px_quirk radeon_px_
* https://bugzilla.kernel.org/show_bug.cgi?id=51381
*/
{ PCI_VENDOR_ID_ATI, 0x6840, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX },
+ /* Asus K53TK laptop with AMD A6-3420M APU and Radeon 7670m GPU
+ * https://bugs.freedesktop.org/show_bug.cgi?id=101491
+ */
+ { PCI_VENDOR_ID_ATI, 0x6741, 0x1043, 0x2122, RADEON_PX_QUIRK_DISABLE_PX },
/* macbook pro 8.2 */
{ PCI_VENDOR_ID_ATI, 0x6741, PCI_VENDOR_ID_APPLE, 0x00e2, RADEON_PX_QUIRK_LONG_WAKEUP },
{ 0, 0, 0, 0, 0 },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.
This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().
Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:
[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51
Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.
To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.
Reported-by: Bart Van Assche <[email protected]>
Tested-by: Bart Van Assche <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Himanshu Madhani <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Tested-by: Gary Guo <[email protected]>
Tested-by: Chu Yuan Lin <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_internal.h | 2 +-
drivers/target/target_core_tmr.c | 16 ++++++++--------
drivers/target/target_core_transport.c | 9 ++++++---
3 files changed, 15 insertions(+), 12 deletions(-)
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -132,7 +132,7 @@ int init_se_kmem_caches(void);
void release_se_kmem_caches(void);
u32 scsi_get_new_index(scsi_index_t);
void transport_subsystem_check_init(void);
-void transport_cmd_finish_abort(struct se_cmd *, int);
+int transport_cmd_finish_abort(struct se_cmd *, int);
unsigned char *transport_dump_cmd_direction(struct se_cmd *);
void transport_dump_dev_state(struct se_device *, char *, int *);
void transport_dump_dev_info(struct se_device *, struct se_lun *,
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -75,7 +75,7 @@ void core_tmr_release_req(struct se_tmr_
kfree(tmr);
}
-static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
+static int core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
{
unsigned long flags;
bool remove = true, send_tas;
@@ -91,7 +91,7 @@ static void core_tmr_handle_tas_abort(st
transport_send_task_abort(cmd);
}
- transport_cmd_finish_abort(cmd, remove);
+ return transport_cmd_finish_abort(cmd, remove);
}
static int target_check_cdb_and_preempt(struct list_head *list,
@@ -185,8 +185,8 @@ void core_tmr_abort_task(
cancel_work_sync(&se_cmd->work);
transport_wait_for_tasks(se_cmd);
- transport_cmd_finish_abort(se_cmd, true);
- target_put_sess_cmd(se_cmd);
+ if (!transport_cmd_finish_abort(se_cmd, true))
+ target_put_sess_cmd(se_cmd);
printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for"
" ref_tag: %llu\n", ref_tag);
@@ -286,8 +286,8 @@ static void core_tmr_drain_tmr_list(
cancel_work_sync(&cmd->work);
transport_wait_for_tasks(cmd);
- transport_cmd_finish_abort(cmd, 1);
- target_put_sess_cmd(cmd);
+ if (!transport_cmd_finish_abort(cmd, 1))
+ target_put_sess_cmd(cmd);
}
}
@@ -385,8 +385,8 @@ static void core_tmr_drain_state_list(
cancel_work_sync(&cmd->work);
transport_wait_for_tasks(cmd);
- core_tmr_handle_tas_abort(cmd, tas);
- target_put_sess_cmd(cmd);
+ if (!core_tmr_handle_tas_abort(cmd, tas))
+ target_put_sess_cmd(cmd);
}
}
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -639,9 +639,10 @@ static void transport_lun_remove_cmd(str
percpu_ref_put(&lun->lun_ref);
}
-void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
+int transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
{
bool ack_kref = (cmd->se_cmd_flags & SCF_ACK_KREF);
+ int ret = 0;
if (cmd->se_cmd_flags & SCF_SE_LUN_CMD)
transport_lun_remove_cmd(cmd);
@@ -653,9 +654,11 @@ void transport_cmd_finish_abort(struct s
cmd->se_tfo->aborted_task(cmd);
if (transport_cmd_check_stop_to_fabric(cmd))
- return;
+ return 1;
if (remove && ack_kref)
- transport_put_cmd(cmd);
+ ret = transport_put_cmd(cmd);
+
+ return ret;
}
static void target_complete_failure_work(struct work_struct *work)
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit abb85a9b512e8ca7ad04a5a8a6db9664fe644974 upstream.
When iscsi WRITE underflow occurs there are two different scenarios
that can happen.
Normally in practice, when an EDTL vs. SCSI CDB TRANSFER LENGTH
underflow is detected, the iscsi immediate data payload is the
smaller SCSI CDB TRANSFER LENGTH.
That is, when a host fabric LLD is using a fixed size EDTL for
a specific control CDB, the SCSI CDB TRANSFER LENGTH and actual
SCSI payload ends up being smaller than EDTL. In iscsi, this
means the received iscsi immediate data payload matches the
smaller SCSI CDB TRANSFER LENGTH, because there is no more
SCSI payload to accept beyond SCSI CDB TRANSFER LENGTH.
However, it's possible for a malicous host to send a WRITE
underflow where EDTL is larger than SCSI CDB TRANSFER LENGTH,
but incoming iscsi immediate data actually matches EDTL.
In the wild, we've never had a iscsi host environment actually
try to do this.
For this special case, it's wrong to truncate part of the
control CDB payload and continue to process the command during
underflow when immediate data payload received was larger than
SCSI CDB TRANSFER LENGTH, so go ahead and reject and drop the
bogus payload as a defensive action.
Note this potential bug was originally relaxed by the following
for allowing WRITE underflow in MSFT FCP host environments:
commit c72c5250224d475614a00c1d7e54a67f77cd3410
Author: Roland Dreier <[email protected]>
Date: Wed Jul 22 15:08:18 2015 -0700
target: allow underflow/overflow for PR OUT etc. commands
Cc: Roland Dreier <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1112,6 +1112,18 @@ iscsit_get_immediate_data(struct iscsi_c
*/
if (dump_payload)
goto after_immediate_data;
+ /*
+ * Check for underflow case where both EDTL and immediate data payload
+ * exceeds what is presented by CDB's TRANSFER LENGTH, and what has
+ * already been set in target_cmd_size_check() as se_cmd->data_length.
+ *
+ * For this special case, fail the command and dump the immediate data
+ * payload.
+ */
+ if (cmd->first_burst_len > cmd->se_cmd.data_length) {
+ cmd->sense_reason = TCM_INVALID_CDB_FIELD;
+ goto after_immediate_data;
+ }
immed_ret = iscsit_handle_immediate_data(cmd, hdr,
cmd->first_burst_len);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 9fa4eb8e490a28de40964b1b0e583d8db4c7e57c upstream.
If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return
ERR_PTR(status)
with that status to follow_automount(), which will then dereference an
invalid pointer.
So treat a positive status the same as zero, and map to ENOENT.
See comment in systemd src/core/automount.c::automount_send_ready().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: NeilBrown <[email protected]>
Cc: Ian Kent <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/autofs4/dev-ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -331,7 +331,7 @@ static int autofs_dev_ioctl_fail(struct
int status;
token = (autofs_wqt_t) param->fail.token;
- status = param->fail.status ? param->fail.status : -ENOENT;
+ status = param->fail.status < 0 ? param->fail.status : -ENOENT;
return autofs4_wait_release(sbi, token, status);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johan Hovold <[email protected]>
commit ec963b412a54aac8e527708ecad06a6988a86fb4 upstream.
Fix up the root-hub descriptor to accommodate the variable-length
DeviceRemovable and PortPwrCtrlMask fields, while marking all ports as
removable (and leaving the reserved bit zero unset).
Also add a build-time constraint on VHCI_HC_PORTS which must never be
greater than USB_MAXCHILDREN (but this was only enforced through a
KConfig constant).
This specifically fixes the descriptor layout whenever VHCI_HC_PORTS is
greater than seven (default is 8).
Fixes: 04679b3489e0 ("Staging: USB/IP: add client driver")
Cc: Takahiro Hirofuchi <[email protected]>
Cc: Valentina Manea <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Shuah Khan <[email protected]>
[ johan: backport to v4.4, which uses VHCI_NPORTS ]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/vhci_hcd.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -215,14 +215,19 @@ done:
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
+ int width;
+
memset(desc, 0, sizeof(*desc));
desc->bDescriptorType = USB_DT_HUB;
- desc->bDescLength = 9;
desc->wHubCharacteristics = cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
+
desc->bNbrPorts = VHCI_NPORTS;
- desc->u.hs.DeviceRemovable[0] = 0xff;
- desc->u.hs.DeviceRemovable[1] = 0xff;
+ BUILD_BUG_ON(VHCI_NPORTS > USB_MAXCHILDREN);
+ width = desc->bNbrPorts / 8 + 1;
+ desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
+ memset(&desc->u.hs.DeviceRemovable[0], 0, width);
+ memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
}
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Wolf <[email protected]>
commit 3ec754410cb3e931a6c4920b1a150f21a94a2bf4 upstream.
An empty __dtb_start to __dtb_end section might result in
initial_boot_params being null for arch/mips/ralink. This showed that the
boot process hangs indefinitely in of_scan_flat_dt().
Signed-off-by: Tobias Wolf <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/14605/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Amit Pundir <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/of/fdt.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -632,9 +632,12 @@ int __init of_scan_flat_dt(int (*it)(uns
const char *pathp;
int offset, rc = 0, depth = -1;
- for (offset = fdt_next_node(blob, -1, &depth);
- offset >= 0 && depth >= 0 && !rc;
- offset = fdt_next_node(blob, offset, &depth)) {
+ if (!blob)
+ return 0;
+
+ for (offset = fdt_next_node(blob, -1, &depth);
+ offset >= 0 && depth >= 0 && !rc;
+ offset = fdt_next_node(blob, offset, &depth)) {
pathp = fdt_get_name(blob, offset, NULL);
if (*pathp == '/')
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.
The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert. This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.
This allows ethtool to report the correct link partner auto-negotiation
status.
Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Amit Pundir <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/marvell.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -822,8 +822,6 @@ static int marvell_read_status(struct ph
phydev->lp_advertising = mii_stat1000_to_ethtool_lpa_t(lpagb) |
mii_lpa_to_ethtool_lpa_t(lpa);
- lpa &= adv;
-
if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
phydev->duplex = DUPLEX_FULL;
else
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guilherme G. Piccoli <[email protected]>
commit 54adc01055b75ec8769c5a36574c7a0895c0c0b2 upstream.
When disabling the controller, the specification says the register
NVME_REG_CC should be written and then driver needs to wait the
adapter to be ready, which is checked by reading another register
bit (NVME_CSTS_RDY). There's a timeout validation in this checking,
so in case this timeout is reached the driver gives up and removes
the adapter from the system.
After a firmware activation procedure, the PCI_DEVICE(0x1c58, 0x0003)
(HGST adapter) end up being removed if we issue a reset_controller,
because driver keeps verifying the NVME_REG_CSTS until the timeout is
reached. This patch adds a necessary quirk for this adapter, by
introducing a delay before nvme_wait_ready(), so the reset procedure
is able to be completed. This quirk is needed because just increasing
the timeout is not enough in case of this adapter - the driver must
wait before start reading NVME_REG_CSTS register on this specific
device.
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
[mauricfo: backport to v4.4.70 without nvme quirk handling & nvme_ctrl]
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Tested-by: Narasimhan Vaidyanathan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/nvme.h | 7 +++++++
drivers/nvme/host/pci.c | 10 ++++++++++
2 files changed, 17 insertions(+)
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -27,6 +27,13 @@ enum {
NVME_NS_LIGHTNVM = 1,
};
+/* The below value is the specific amount of delay needed before checking
+ * readiness in case of the PCI_DEVICE(0x1c58, 0x0003), which needs the
+ * NVME_QUIRK_DELAY_BEFORE_CHK_RDY quirk enabled. The value (in ms) was
+ * found empirically.
+ */
+#define NVME_QUIRK_DELAY_AMOUNT 2000
+
/*
* Represents an NVM Express device. Each nvme_dev is a PCI function.
*/
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1633,10 +1633,20 @@ static int nvme_wait_ready(struct nvme_d
*/
static int nvme_disable_ctrl(struct nvme_dev *dev, u64 cap)
{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+
dev->ctrl_config &= ~NVME_CC_SHN_MASK;
dev->ctrl_config &= ~NVME_CC_ENABLE;
writel(dev->ctrl_config, &dev->bar->cc);
+ /* Checking for dev->tagset is a trick to avoid sleeping on module
+ * load, since we only need the quirk on reset_controller. Notice
+ * that the HGST device needs this delay only in firmware activation
+ * procedure; unfortunately we have no (easy) way to verify this.
+ */
+ if (pdev->vendor == 0x1c58 && pdev->device == 0x0003 && dev->tagset)
+ msleep(NVME_QUIRK_DELAY_AMOUNT);
+
return nvme_wait_ready(dev, cap, false);
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yendapally Reddy Dhananjaya Reddy <[email protected]>
commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.
USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <[email protected]>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Amit Pundir <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
if (rc)
return rc;
- iproc_mdio_config_clk(priv->base);
-
/* Prepare the read operation */
cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
(reg << MII_DATA_RA_SHIFT) |
@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
if (rc)
return rc;
- iproc_mdio_config_clk(priv->base);
-
/* Prepare the write operation */
cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
(reg << MII_DATA_RA_SHIFT) |
@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
bus->read = iproc_mdio_read;
bus->write = iproc_mdio_write;
+ iproc_mdio_config_clk(priv->base);
+
rc = of_mdiobus_register(bus, pdev->dev.of_node);
if (rc) {
dev_err(&pdev->dev, "MDIO bus registration failed\n");
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Shilovsky <[email protected]>
commit dcd87838c06f05ab7650b249ebf0d5b57ae63e1e upstream.
Downgrade the loglevel for SMB2 to prevent filling the log
with messages if e.g. readdir was interrupted. Also make SMB2
and SMB1 codepaths do the same logging during readdir.
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb1ops.c | 9 +++++++--
fs/cifs/smb2ops.c | 4 ++--
2 files changed, 9 insertions(+), 4 deletions(-)
--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -849,8 +849,13 @@ cifs_query_dir_first(const unsigned int
struct cifs_fid *fid, __u16 search_flags,
struct cifs_search_info *srch_inf)
{
- return CIFSFindFirst(xid, tcon, path, cifs_sb,
- &fid->netfid, search_flags, srch_inf, true);
+ int rc;
+
+ rc = CIFSFindFirst(xid, tcon, path, cifs_sb,
+ &fid->netfid, search_flags, srch_inf, true);
+ if (rc)
+ cifs_dbg(FYI, "find first failed=%d\n", rc);
+ return rc;
}
static int
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -909,7 +909,7 @@ smb2_query_dir_first(const unsigned int
rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL);
kfree(utf16_path);
if (rc) {
- cifs_dbg(VFS, "open dir failed\n");
+ cifs_dbg(FYI, "open dir failed rc=%d\n", rc);
return rc;
}
@@ -919,7 +919,7 @@ smb2_query_dir_first(const unsigned int
rc = SMB2_query_directory(xid, tcon, fid->persistent_fid,
fid->volatile_fid, 0, srch_inf);
if (rc) {
- cifs_dbg(VFS, "query directory failed\n");
+ cifs_dbg(FYI, "query directory failed rc=%d\n", rc);
SMB2_close(xid, tcon, fid->persistent_fid, fid->volatile_fid);
}
return rc;
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Parschauer <[email protected]>
commit 3db28271f0feae129262d30e41384a7c4c767987 upstream.
This mouse is also known under other IDs. It needs the quirk
ALWAYS_POLL or will disconnect in runlevel 1 or 3.
Signed-off-by: Sebastian Parschauer <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/usbhid/hid-quirks.c | 1 +
2 files changed, 4 insertions(+)
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -285,6 +285,9 @@
#define USB_VENDOR_ID_DEALEXTREAME 0x10c5
#define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701 0x819a
+#define USB_VENDOR_ID_DELL 0x413c
+#define USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE 0x301a
+
#define USB_VENDOR_ID_DELORME 0x1163
#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -72,6 +72,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_PIXART_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Matveychikov <[email protected]>
commit a91e0f680bcd9e10c253ae8b62462a38bd48f09f upstream.
When using get_options() it's possible to specify a range of numbers,
like 1-100500. The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ilya V. Matveychikov <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/cmdline.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -22,14 +22,14 @@
* the values[M, M+1, ..., N] into the ints array in get_options.
*/
-static int get_range(char **str, int *pint)
+static int get_range(char **str, int *pint, int n)
{
int x, inc_counter, upper_range;
(*str)++;
upper_range = simple_strtol((*str), NULL, 0);
inc_counter = upper_range - *pint;
- for (x = *pint; x < upper_range; x++)
+ for (x = *pint; n && x < upper_range; x++, n--)
*pint++ = x;
return inc_counter;
}
@@ -96,7 +96,7 @@ char *get_options(const char *str, int n
break;
if (res == 3) {
int range_nums;
- range_nums = get_range((char **)&str, ints + i);
+ range_nums = get_range((char **)&str, ints + i, nints - i);
if (range_nums < 0)
break;
/*
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Drake <[email protected]>
commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 upstream.
Without this quirk, the touchpad is not responsive on this product, with
the following message repeated in the logs:
psmouse serio1: bad data from KBC - timeout
Add it to the notimeout list alongside other similar Fujitsu laptops.
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -788,6 +788,13 @@ static const struct dmi_system_id __init
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
},
},
+ {
+ /* Fujitsu UH554 laptop */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"),
+ },
+ },
{ }
};
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naveen N. Rao <[email protected]>
commit a9f8553e935f26cb5447f67e280946b0923cd2dc upstream.
This fixes a crash when function_graph and jprobes are used together.
This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix
conflict between jprobes and function graph tracing"), but for powerpc.
Jprobes breaks function_graph tracing since the jprobe hook needs to use
jprobe_return(), which never returns back to the hook, but instead to
the original jprobe'd function. The solution is to momentarily pause
function_graph tracing before invoking the jprobe hook and re-enable it
when returning back to the original jprobe'd function.
Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer")
Signed-off-by: Naveen N. Rao <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/kprobes.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -514,6 +514,15 @@ int __kprobes setjmp_pre_handler(struct
#endif
#endif
+ /*
+ * jprobes use jprobe_return() which skips the normal return
+ * path of the function, and this messes up the accounting of the
+ * function graph tracer.
+ *
+ * Pause function graph tracing while performing the jprobe function.
+ */
+ pause_graph_tracing();
+
return 1;
}
@@ -536,6 +545,8 @@ int __kprobes longjmp_break_handler(stru
* saved regs...
*/
memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
+ /* It's OK to start function graph tracing again */
+ unpause_graph_tracing();
preempt_enable_no_resched();
return 1;
}
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric W. Biederman <[email protected]>
commit 57db7e4a2d92c2d3dfbca4ef8057849b2682436b upstream.
Thomas Gleixner wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
> The kernel prevents sending of siginfo with positive si_code, because
> these codes are reserved for kernel. I think we can allow a task to
> send such a siginfo to itself. This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
> id = timer_create(CLOCK_XXX, ..... signo = SIGX);
> timer_set(id, ....);
> info->si_signo = SIGX;
> info->si_code = SI_TIMER:
> info->_sifields._timer._tid = id;
> info->_sifields._timer._sys_private = 2;
> rt_[tg]sigqueueinfo(..., SIGX, info);
> sigemptyset(&sigset);
> sigaddset(&sigset, SIGX);
> rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
> info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
> do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.
This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.
The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.
Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.
Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers. This makes it clear why the code cares about preallocated
timers.
Reported-by: Thomas Gleixner <[email protected]>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -503,7 +503,8 @@ int unhandled_signal(struct task_struct
return !tsk->ptrace;
}
-static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+static void collect_signal(int sig, struct sigpending *list, siginfo_t *info,
+ bool *resched_timer)
{
struct sigqueue *q, *first = NULL;
@@ -525,6 +526,12 @@ static void collect_signal(int sig, stru
still_pending:
list_del_init(&first->list);
copy_siginfo(info, &first->info);
+
+ *resched_timer =
+ (first->flags & SIGQUEUE_PREALLOC) &&
+ (info->si_code == SI_TIMER) &&
+ (info->si_sys_private);
+
__sigqueue_free(first);
} else {
/*
@@ -541,12 +548,12 @@ still_pending:
}
static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
- siginfo_t *info)
+ siginfo_t *info, bool *resched_timer)
{
int sig = next_signal(pending, mask);
if (sig)
- collect_signal(sig, pending, info);
+ collect_signal(sig, pending, info, resched_timer);
return sig;
}
@@ -558,15 +565,16 @@ static int __dequeue_signal(struct sigpe
*/
int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
{
+ bool resched_timer = false;
int signr;
/* We only dequeue private signals from ourselves, we don't let
* signalfd steal them
*/
- signr = __dequeue_signal(&tsk->pending, mask, info);
+ signr = __dequeue_signal(&tsk->pending, mask, info, &resched_timer);
if (!signr) {
signr = __dequeue_signal(&tsk->signal->shared_pending,
- mask, info);
+ mask, info, &resched_timer);
/*
* itimer signal ?
*
@@ -611,7 +619,7 @@ int dequeue_signal(struct task_struct *t
*/
current->jobctl |= JOBCTL_STOP_DEQUEUED;
}
- if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
+ if (resched_timer) {
/*
* Release the siglock to ensure proper locking order
* of timer locks outside of siglocks. Note, we leave
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Mackerras <[email protected]>
commit 46a704f8409f79fd66567ad3f8a7304830a84293 upstream.
If userspace attempts to call the KVM_RUN ioctl when it has hardware
transactional memory (HTM) enabled, the values that it has put in the
HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by
guest values. To fix this, we detect this condition and save those
SPR values in the thread struct, and disable HTM for the task. If
userspace goes to access those SPRs or the HTM facility in future,
a TM-unavailable interrupt will occur and the handler will reload
those SPRs and re-enable HTM.
If userspace has started a transaction and suspended it, we would
currently lose the transactional state in the guest entry path and
would almost certainly get a "TM Bad Thing" interrupt, which would
cause the host to crash. To avoid this, we detect this case and
return from the KVM_RUN ioctl with an EINVAL error, with the KVM
exit reason set to KVM_EXIT_FAIL_ENTRY.
Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kvm/book3s_hv.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2693,6 +2693,27 @@ static int kvmppc_vcpu_run_hv(struct kvm
return -EINVAL;
}
+ /*
+ * Don't allow entry with a suspended transaction, because
+ * the guest entry/exit code will lose it.
+ * If the guest has TM enabled, save away their TM-related SPRs
+ * (they will get restored by the TM unavailable interrupt).
+ */
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ if (cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
+ (current->thread.regs->msr & MSR_TM)) {
+ if (MSR_TM_ACTIVE(current->thread.regs->msr)) {
+ run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+ run->fail_entry.hardware_entry_failure_reason = 0;
+ return -EINVAL;
+ }
+ current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
+ current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
+ current->thread.tm_texasr = mfspr(SPRN_TEXASR);
+ current->thread.regs->msr &= ~MSR_TM;
+ }
+#endif
+
kvmppc_core_prepare_to_enter(vcpu);
/* No need to go into the guest when all we'll do is come back out */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: William Wu <[email protected]>
commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.
Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.
I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:
==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
>ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: William Wu <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Cc: Jerry Zhang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/function/f_fs.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1668,12 +1668,12 @@ static int ffs_func_eps_enable(struct ff
ep->ep->driver_data = ep;
ep->ep->desc = ds;
- comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
- USB_DT_ENDPOINT_SIZE);
- ep->ep->maxburst = comp_desc->bMaxBurst + 1;
-
- if (needs_comp_desc)
+ if (needs_comp_desc) {
+ comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+ USB_DT_ENDPOINT_SIZE);
+ ep->ep->maxburst = comp_desc->bMaxBurst + 1;
ep->ep->comp_desc = comp_desc;
+ }
ret = usb_ep_enable(ep->ep);
if (likely(!ret)) {
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guilherme G. Piccoli <[email protected]>
commit b5a10c5f7532b7473776da87e67f8301bbc32693 upstream.
Commit 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter
readiness") introduced a quirk to adapters that cannot read the bit
NVME_CSTS_RDY right after register NVME_REG_CC is set; these adapters
need a delay or else the action of reading the bit NVME_CSTS_RDY could
somehow corrupt adapter's registers state and it never recovers.
When this quirk was added, we checked ctrl->tagset in order to avoid
quirking in probe time, supposing we would never require such delay
during probe. Well, it was too optimistic; we in fact need this quirk
at probe time in some cases, like after a kexec.
In some experiments, after abnormal shutdown of machine (aka power cord
unplug), we booted into our bootloader in Power, which is a Linux kernel,
and kexec'ed into another distro. If this kexec is too quick, we end up
reaching the probe of NVMe adapter in that distro when adapter is in
bad state (not fully initialized on our bootloader). What happens next
is that nvme_wait_ready() is unable to complete, except if the quirk is
enabled.
So, this patch removes the original ctrl->tagset verification in order
to enable the quirk even on probe time.
Fixes: 54adc01055b7 ("nvme/quirk: Add a delay before checking for adapter readiness")
Reported-by: Andrew Byrne <[email protected]>
Reported-by: Jaime A. H. Gomez <[email protected]>
Reported-by: Zachary D. Myers <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Acked-by: Jeffrey Lien <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
[mauricfo: backport to v4.4.70 without nvme quirk handling & nvme_ctrl]
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Tested-by: Narasimhan Vaidyanathan <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nvme/host/pci.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1639,12 +1639,7 @@ static int nvme_disable_ctrl(struct nvme
dev->ctrl_config &= ~NVME_CC_ENABLE;
writel(dev->ctrl_config, &dev->bar->cc);
- /* Checking for dev->tagset is a trick to avoid sleeping on module
- * load, since we only need the quirk on reset_controller. Notice
- * that the HGST device needs this delay only in firmware activation
- * procedure; unfortunately we have no (easy) way to verify this.
- */
- if (pdev->vendor == 0x1c58 && pdev->device == 0x0003 && dev->tagset)
+ if (pdev->vendor == 0x1c58 && pdev->device == 0x0003)
msleep(NVME_QUIRK_DELAY_AMOUNT);
return nvme_wait_ready(dev, cap, false);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Ellerman <[email protected]>
[Note this patch is not upstream. The bug fix was fixed differently in
upstream prior to the bug being identified.]
The SLB miss handler calls slb_allocate_realmode() in order to create an
SLB entry for the faulting address. At the very start of that function
we check that the faulting Effective Address (EA) is less than
PGTABLE_RANGE (ignoring the region), ie. is it an address which could
possibly fit in the virtual address space.
For an EA which fails that test, we branch out of line (to label 8), but
we still go on to create an SLB entry for the address. The SLB entry we
create has a VSID of 0, which means it will never match anything in the
hash table and so can't actually translate to a physical address.
However that SLB entry will be inserted in the SLB, and so needs to be
managed properly like any other SLB entry. In particular we need to
insert the SLB entry in the SLB cache, so that it will be flushed when
the process is descheduled.
And that is where the bugs begin. The first bug is that slb_finish_load()
uses cr7 to decide if it should insert the SLB entry into the SLB cache.
When we come from the invalid EA case we don't set cr7, it just has some
junk value from userspace. So we may or may not insert the SLB entry in
the SLB cache. If we fail to insert it, we may then incorrectly leave it
in the SLB when the process is descheduled.
The second bug is that even if we do happen to add the entry to the SLB
cache, we do not have enough bits in the SLB cache to remember the full
ESID value for very large EAs.
For example if a process branches to 0x788c545a18000000, that results in
a 256MB SLB entry with an ESID of 0x788c545a1. But each entry in the SLB
cache is only 32-bits, meaning we truncate the ESID to 0x88c545a1. This
has the same effect as the first bug, we incorrectly leave the SLB entry
in the SLB when the process is descheduled.
When a process accesses an invalid EA it results in a SEGV signal being
sent to the process, which typically results in the process being
killed. Process death isn't instantaneous however, the process may catch
the SEGV signal and continue somehow, or the kernel may start writing a
core dump for the process, either of which means it's possible for the
process to be preempted while its processing the SEGV but before it's
been killed.
If that happens, when the process is scheduled back onto the CPU we will
allocate a new SLB entry for the NIP, which will insert a second entry
into the SLB for the bad EA. Because we never flushed the original
entry, due to either bug one or two, we now have two SLB entries that
match the same EA.
If another access is made to that EA, either by the process continuing
after catching the SEGV, or by a second process accessing the same bad
EA on the same CPU, we will trigger an SLB multi-hit machine check
exception. This has been observed happening in the wild.
The fix is when we hit the invalid EA case, we mark the SLB cache as
being full. This causes us to not insert the truncated ESID into the SLB
cache, and means when the process is switched out we will flush the
entire SLB. Note that this works both for the original fault and for a
subsequent call to slb_allocate_realmode() from switch_slb().
Because we mark the SLB cache as full, it doesn't really matter what
value is in cr7, but rather than leaving it as something random we set
it to indicate the address was a kernel address. That also skips the
attempt to insert it in the SLB cache which is a nice side effect.
Another way to fix the bug would be to make the entries in the SLB cache
wider, so that we don't truncate the ESID. However this would be a more
intrusive change as it alters the size and layout of the paca.
This bug was fixed in upstream by commit f0f558b131db ("powerpc/mm:
Preserve CFAR value on SLB miss caused by access to bogus address"),
which changed the way we handle a bad EA entirely removing this bug in
the process.
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Paul Mackerras <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/slb_low.S | 10 ++++++++++
1 file changed, 10 insertions(+)
Note this patch is not upstream. The bug fix was fixed differently in
upstream prior to the bug being identified.
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -179,6 +179,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEG
b slb_finish_load
8: /* invalid EA */
+ /*
+ * It's possible the bad EA is too large to fit in the SLB cache, which
+ * would mean we'd fail to invalidate it on context switch. So mark the
+ * SLB cache as full so we force a full flush. We also set cr7+eq to
+ * mark the address as a kernel address, so slb_finish_load() skips
+ * trying to insert it into the SLB cache.
+ */
+ li r9,SLB_CACHE_ENTRIES + 1
+ sth r9,PACASLBCACHEPTR(r13)
+ crset 4*cr7+eq
li r10,0 /* BAD_VSID */
li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit acfd6ee4fa7ebeee75511825fe02be3f7ac1d668 upstream.
Fixes resume from suspend.
bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121
Reported-by: Przemek <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/radeon_combios.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -3394,6 +3394,13 @@ void radeon_combios_asic_init(struct drm
rdev->pdev->subsystem_vendor == 0x103c &&
rdev->pdev->subsystem_device == 0x280a)
return;
+ /* quirk for rs4xx Toshiba Sattellite L20-183 latop to make it resume
+ * - it hangs on resume inside the dynclk 1 table.
+ */
+ if (rdev->family == CHIP_RS400 &&
+ rdev->pdev->subsystem_vendor == 0x1179 &&
+ rdev->pdev->subsystem_device == 0xff31)
+ return;
/* DYN CLK 1 */
table = combios_get_table_offset(dev, COMBIOS_DYN_CLK_1_TABLE);
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: John Stultz <[email protected]>
commit ceea5e3771ed2378668455fa21861bead7504df5 upstream.
In tests, which excercise switching of clocksources, a NULL
pointer dereference can be observed on AMR64 platforms in the
clocksource read() function:
u64 clocksource_mmio_readl_down(struct clocksource *c)
{
return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
}
This is called from the core timekeeping code via:
cycle_now = tkr->read(tkr->clock);
tkr->read is the cached tkr->clock->read() function pointer.
When the clocksource is changed then tkr->clock and tkr->read
are updated sequentially. The code above results in a sequential
load operation of tkr->read and tkr->clock as well.
If the store to tkr->clock hits between the loads of tkr->read
and tkr->clock, then the old read() function is called with the
new clock pointer. As a consequence the read() function
dereferences a different data structure and the resulting 'reg'
pointer can point anywhere including NULL.
This problem was introduced when the timekeeping code was
switched over to use struct tk_read_base. Before that, it was
theoretically possible as well when the compiler decided to
reload clock in the code sequence:
now = tk->clock->read(tk->clock);
Add a helper function which avoids the issue by reading
tk_read_base->clock once into a local variable clk and then issue
the read function via clk->read(clk). This guarantees that the
read() function always gets the proper clocksource pointer handed
in.
Since there is now no use for the tkr.read pointer, this patch
also removes it, and to address stopping the fast timekeeper
during suspend/resume, it introduces a dummy clocksource to use
rather then just a dummy read function.
Signed-off-by: John Stultz <[email protected]>
Acked-by: Ingo Molnar <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Miroslav Lichvar <[email protected]>
Cc: Daniel Mentz <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/timekeeper_internal.h | 1
kernel/time/timekeeping.c | 47 ++++++++++++++++++++++++++----------
2 files changed, 34 insertions(+), 14 deletions(-)
--- a/include/linux/timekeeper_internal.h
+++ b/include/linux/timekeeper_internal.h
@@ -29,7 +29,6 @@
*/
struct tk_read_base {
struct clocksource *clock;
- cycle_t (*read)(struct clocksource *cs);
cycle_t mask;
cycle_t cycle_last;
u32 mult;
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -116,6 +116,26 @@ static inline void tk_update_sleep_time(
tk->offs_boot = ktime_add(tk->offs_boot, delta);
}
+/*
+ * tk_clock_read - atomic clocksource read() helper
+ *
+ * This helper is necessary to use in the read paths because, while the
+ * seqlock ensures we don't return a bad value while structures are updated,
+ * it doesn't protect from potential crashes. There is the possibility that
+ * the tkr's clocksource may change between the read reference, and the
+ * clock reference passed to the read function. This can cause crashes if
+ * the wrong clocksource is passed to the wrong read function.
+ * This isn't necessary to use when holding the timekeeper_lock or doing
+ * a read of the fast-timekeeper tkrs (which is protected by its own locking
+ * and update logic).
+ */
+static inline u64 tk_clock_read(struct tk_read_base *tkr)
+{
+ struct clocksource *clock = READ_ONCE(tkr->clock);
+
+ return clock->read(clock);
+}
+
#ifdef CONFIG_DEBUG_TIMEKEEPING
#define WARNING_FREQ (HZ*300) /* 5 minute rate-limiting */
@@ -173,7 +193,7 @@ static inline cycle_t timekeeping_get_de
*/
do {
seq = read_seqcount_begin(&tk_core.seq);
- now = tkr->read(tkr->clock);
+ now = tk_clock_read(tkr);
last = tkr->cycle_last;
mask = tkr->mask;
max = tkr->clock->max_cycles;
@@ -207,7 +227,7 @@ static inline cycle_t timekeeping_get_de
cycle_t cycle_now, delta;
/* read clocksource */
- cycle_now = tkr->read(tkr->clock);
+ cycle_now = tk_clock_read(tkr);
/* calculate the delta since the last update_wall_time */
delta = clocksource_delta(cycle_now, tkr->cycle_last, tkr->mask);
@@ -235,12 +255,10 @@ static void tk_setup_internals(struct ti
old_clock = tk->tkr_mono.clock;
tk->tkr_mono.clock = clock;
- tk->tkr_mono.read = clock->read;
tk->tkr_mono.mask = clock->mask;
- tk->tkr_mono.cycle_last = tk->tkr_mono.read(clock);
+ tk->tkr_mono.cycle_last = tk_clock_read(&tk->tkr_mono);
tk->tkr_raw.clock = clock;
- tk->tkr_raw.read = clock->read;
tk->tkr_raw.mask = clock->mask;
tk->tkr_raw.cycle_last = tk->tkr_mono.cycle_last;
@@ -404,7 +422,7 @@ static __always_inline u64 __ktime_get_f
now += timekeeping_delta_to_ns(tkr,
clocksource_delta(
- tkr->read(tkr->clock),
+ tk_clock_read(tkr),
tkr->cycle_last,
tkr->mask));
} while (read_seqcount_retry(&tkf->seq, seq));
@@ -432,6 +450,10 @@ static cycle_t dummy_clock_read(struct c
return cycles_at_suspend;
}
+static struct clocksource dummy_clock = {
+ .read = dummy_clock_read,
+};
+
/**
* halt_fast_timekeeper - Prevent fast timekeeper from accessing clocksource.
* @tk: Timekeeper to snapshot.
@@ -448,13 +470,13 @@ static void halt_fast_timekeeper(struct
struct tk_read_base *tkr = &tk->tkr_mono;
memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
- cycles_at_suspend = tkr->read(tkr->clock);
- tkr_dummy.read = dummy_clock_read;
+ cycles_at_suspend = tk_clock_read(tkr);
+ tkr_dummy.clock = &dummy_clock;
update_fast_timekeeper(&tkr_dummy, &tk_fast_mono);
tkr = &tk->tkr_raw;
memcpy(&tkr_dummy, tkr, sizeof(tkr_dummy));
- tkr_dummy.read = dummy_clock_read;
+ tkr_dummy.clock = &dummy_clock;
update_fast_timekeeper(&tkr_dummy, &tk_fast_raw);
}
@@ -618,11 +640,10 @@ static void timekeeping_update(struct ti
*/
static void timekeeping_forward_now(struct timekeeper *tk)
{
- struct clocksource *clock = tk->tkr_mono.clock;
cycle_t cycle_now, delta;
s64 nsec;
- cycle_now = tk->tkr_mono.read(clock);
+ cycle_now = tk_clock_read(&tk->tkr_mono);
delta = clocksource_delta(cycle_now, tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
tk->tkr_mono.cycle_last = cycle_now;
tk->tkr_raw.cycle_last = cycle_now;
@@ -1405,7 +1426,7 @@ void timekeeping_resume(void)
* The less preferred source will only be tried if there is no better
* usable source. The rtc part is handled separately in rtc core code.
*/
- cycle_now = tk->tkr_mono.read(clock);
+ cycle_now = tk_clock_read(&tk->tkr_mono);
if ((clock->flags & CLOCK_SOURCE_SUSPEND_NONSTOP) &&
cycle_now > tk->tkr_mono.cycle_last) {
u64 num, max = ULLONG_MAX;
@@ -1800,7 +1821,7 @@ void update_wall_time(void)
#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
offset = real_tk->cycle_interval;
#else
- offset = clocksource_delta(tk->tkr_mono.read(tk->tkr_mono.clock),
+ offset = clocksource_delta(tk_clock_read(&tk->tkr_mono),
tk->tkr_mono.cycle_last, tk->tkr_mono.mask);
#endif
4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit 98da7d08850fb8bdeb395d6368ed15753304aa0c upstream.
When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included. This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.
For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).
The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely. Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).
[[email protected]: additional commenting from Kees]
Fixes: b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <[email protected]>
Acked-by: Rik van Riel <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Qualys Security Advisory <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/exec.c | 28 ++++++++++++++++++++++++----
1 file changed, 24 insertions(+), 4 deletions(-)
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -206,8 +206,26 @@ static struct page *get_arg_page(struct
if (write) {
unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
+ unsigned long ptr_size;
struct rlimit *rlim;
+ /*
+ * Since the stack will hold pointers to the strings, we
+ * must account for them as well.
+ *
+ * The size calculation is the entire vma while each arg page is
+ * built, so each time we get here it's calculating how far it
+ * is currently (rather than each call being just the newly
+ * added size from the arg page). As a result, we need to
+ * always add the entire size of the pointers, so that on the
+ * last call to get_arg_page() we'll actually have the entire
+ * correct size.
+ */
+ ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
+ if (ptr_size > ULONG_MAX - size)
+ goto fail;
+ size += ptr_size;
+
acct_arg_size(bprm, size / PAGE_SIZE);
/*
@@ -225,13 +243,15 @@ static struct page *get_arg_page(struct
* to work from.
*/
rlim = current->signal->rlim;
- if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) {
- put_page(page);
- return NULL;
- }
+ if (size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4)
+ goto fail;
}
return page;
+
+fail:
+ put_page(page);
+ return NULL;
}
static void put_arg_page(struct page *page)
On Tue, Jun 27, 2017 at 02:49:37PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.75 release.
> There are 26 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jun 29 12:45:11 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 115 pass: 115 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On 06/27/2017 06:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.75 release.
> There are 26 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Jun 29 12:45:11 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.75-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, 2017-06-27 at 14:49 +0200, Greg Kroah-Hartman wrote:
> 4.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Ilya Matveychikov <[email protected]>
>
> commit a91e0f680bcd9e10c253ae8b62462a38bd48f09f upstream.
>
> When using get_options() it's possible to specify a range of numbers,
> like 1-100500. The problem is that it doesn't track array size while
> calling internally to get_range() which iterates over the range and
> fills the memory with numbers.
[...]
> --- a/lib/cmdline.c
> +++ b/lib/cmdline.c
> @@ -22,14 +22,14 @@
> * the values[M, M+1, ..., N] into the ints array in get_options.
> */
>
> -static int get_range(char **str, int *pint)
> +static int get_range(char **str, int *pint, int n)
> {
> int x, inc_counter, upper_range;
>
> (*str)++;
> upper_range = simple_strtol((*str), NULL, 0);
> inc_counter = upper_range - *pint;
> - for (x = *pint; x < upper_range; x++)
> + for (x = *pint; n && x < upper_range; x++, n--)
> *pint++ = x;
> return inc_counter;
> }
But this still returns the number of integers in the range (minus 1)...
> @@ -96,7 +96,7 @@ char *get_options(const char *str, int n
> break;
> if (res == 3) {
> int range_nums;
> - range_nums = get_range((char **)&str, ints + i);
> + range_nums = get_range((char **)&str, ints + i, nints - i);
> if (range_nums < 0)
> break;
> /*
...so that get_options() may set i > nints and ints[0] > nints - 1.
That will presumably result in out-of-bounds reads in callers.
(This set of functions really deserves to be given a test suite and then
rewritten, because they are a *mess*.)
Ben.
--
Ben Hutchings
Software Developer, Codethink Ltd.
> On Jun 29, 2017, at 7:24 PM, Ben Hutchings <[email protected]> wrote:
>
> On Tue, 2017-06-27 at 14:49 +0200, Greg Kroah-Hartman wrote:
>> 4.4-stable review patch. If anyone has any objections, please let me know.
>>
>> ------------------
>>
>> From: Ilya Matveychikov <[email protected]>
>>
>> commit a91e0f680bcd9e10c253ae8b62462a38bd48f09f upstream.
>>
>> When using get_options() it's possible to specify a range of numbers,
>> like 1-100500. The problem is that it doesn't track array size while
>> calling internally to get_range() which iterates over the range and
>> fills the memory with numbers.
> [...]
>> --- a/lib/cmdline.c
>> +++ b/lib/cmdline.c
>> @@ -22,14 +22,14 @@
>> * the values[M, M+1, ..., N] into the ints array in get_options.
>> */
>>
>> -static int get_range(char **str, int *pint)
>> +static int get_range(char **str, int *pint, int n)
>> {
>> int x, inc_counter, upper_range;
>>
>> (*str)++;
>> upper_range = simple_strtol((*str), NULL, 0);
>> inc_counter = upper_range - *pint;
>> - for (x = *pint; x < upper_range; x++)
>> + for (x = *pint; n && x < upper_range; x++, n--)
>> *pint++ = x;
>> return inc_counter;
>> }
>
> But this still returns the number of integers in the range (minus 1)...
>
>> @@ -96,7 +96,7 @@ char *get_options(const char *str, int n
>> break;
>> if (res == 3) {
>> int range_nums;
>> - range_nums = get_range((char **)&str, ints + i);
>> + range_nums = get_range((char **)&str, ints + i, nints - i);
>> if (range_nums < 0)
>> break;
>> /*
>
> ...so that get_options() may set i > nints and ints[0] > nints - 1.
> That will presumably result in out-of-bounds reads in callers.
>
> (This set of functions really deserves to be given a test suite and then
> rewritten, because they are a *mess*.)
>
Please review the approach of fixing that:
https://lkml.org/lkml/2017/9/19/105
> Ben.
>
> --
> Ben Hutchings
> Software Developer, Codethink Ltd.
>
>