2017-06-28 08:46:17

by Arvind Yadav

[permalink] [raw]
Subject: [PATCH] clocksource: timer-digicolor: Fix resource leaks in error paths.

Handle return value of clk_prepare_enable. In case of error at init time,
rollback iomapping and unprepare clk.

Signed-off-by: Arvind Yadav <[email protected]>
---
drivers/clocksource/timer-digicolor.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/clocksource/timer-digicolor.c b/drivers/clocksource/timer-digicolor.c
index 94a161e..9360b46 100644
--- a/drivers/clocksource/timer-digicolor.c
+++ b/drivers/clocksource/timer-digicolor.c
@@ -168,15 +168,20 @@ static int __init digicolor_timer_init(struct device_node *node)
irq = irq_of_parse_and_map(node, dc_timer_dev.timer_id);
if (irq <= 0) {
pr_err("Can't parse IRQ\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_iounmap;
}

clk = of_clk_get(node, 0);
if (IS_ERR(clk)) {
pr_err("Can't get timer clock\n");
- return PTR_ERR(clk);
+ ret = PTR_ERR(clk);
+ goto err_iounmap;
}
- clk_prepare_enable(clk);
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto err_clk_put;
+
rate = clk_get_rate(clk);
dc_timer_dev.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);

@@ -193,7 +198,7 @@ static int __init digicolor_timer_init(struct device_node *node)
&dc_timer_dev.ce);
if (ret) {
pr_warn("request of timer irq %d failed (%d)\n", irq, ret);
- return ret;
+ goto err_unprepare;
}

dc_timer_dev.ce.cpumask = cpu_possible_mask;
@@ -202,6 +207,13 @@ static int __init digicolor_timer_init(struct device_node *node)
clockevents_config_and_register(&dc_timer_dev.ce, rate, 0, 0xffffffff);

return 0;
+err_unprepare:
+ clk_disable_unprepare(clk);
+err_clk_put:
+ clk_put(clk);
+err_iounmap:
+ iounmap(dc_timer_dev.base);
+ return ret;
}
CLOCKSOURCE_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
digicolor_timer_init);
--
1.9.1


2017-06-28 17:58:30

by Baruch Siach

[permalink] [raw]
Subject: Re: [PATCH] clocksource: timer-digicolor: Fix resource leaks in error paths.

Hi Arvind,

On Wed, Jun 28, 2017 at 02:15:23PM +0530, Arvind Yadav wrote:
> Handle return value of clk_prepare_enable. In case of error at init time,
> rollback iomapping and unprepare clk.

A failure in digicolor_timer_init() means that the system doesn't boot. I'm
not sure how useful the cleanup code would be what that happens.

baruch

> Signed-off-by: Arvind Yadav <[email protected]>
> ---
> drivers/clocksource/timer-digicolor.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clocksource/timer-digicolor.c b/drivers/clocksource/timer-digicolor.c
> index 94a161e..9360b46 100644
> --- a/drivers/clocksource/timer-digicolor.c
> +++ b/drivers/clocksource/timer-digicolor.c
> @@ -168,15 +168,20 @@ static int __init digicolor_timer_init(struct device_node *node)
> irq = irq_of_parse_and_map(node, dc_timer_dev.timer_id);
> if (irq <= 0) {
> pr_err("Can't parse IRQ\n");
> - return -EINVAL;
> + ret = -EINVAL;
> + goto err_iounmap;
> }
>
> clk = of_clk_get(node, 0);
> if (IS_ERR(clk)) {
> pr_err("Can't get timer clock\n");
> - return PTR_ERR(clk);
> + ret = PTR_ERR(clk);
> + goto err_iounmap;
> }
> - clk_prepare_enable(clk);
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + goto err_clk_put;
> +
> rate = clk_get_rate(clk);
> dc_timer_dev.ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
>
> @@ -193,7 +198,7 @@ static int __init digicolor_timer_init(struct device_node *node)
> &dc_timer_dev.ce);
> if (ret) {
> pr_warn("request of timer irq %d failed (%d)\n", irq, ret);
> - return ret;
> + goto err_unprepare;
> }
>
> dc_timer_dev.ce.cpumask = cpu_possible_mask;
> @@ -202,6 +207,13 @@ static int __init digicolor_timer_init(struct device_node *node)
> clockevents_config_and_register(&dc_timer_dev.ce, rate, 0, 0xffffffff);
>
> return 0;
> +err_unprepare:
> + clk_disable_unprepare(clk);
> +err_clk_put:
> + clk_put(clk);
> +err_iounmap:
> + iounmap(dc_timer_dev.base);
> + return ret;
> }
> CLOCKSOURCE_OF_DECLARE(conexant_digicolor, "cnxt,cx92755-timer",
> digicolor_timer_init);

--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.52.368.4656, http://www.tkos.co.il -