Today sending a signal with rt_sigqueueinfo and receving it on
a signalfd does not work reliably. The issue is that reading
a signalfd instead of returning a siginfo returns a signalfd_siginfo and
the kernel must convert from one to the other.
The kernel does not currently have the code to deduce which union
members of struct siginfo are in use.
In this patchset I fix that by introducing a new function siginfo_layout
that can look at a siginfo and report which union member of struct
nnsiginfo is in use. Before that I clean up how we populate struct
siginfo.
The siginfo structure has two key members si_signo and si_code. Some
si_codes are signal specific and for those it takes si_signo and si_code
to indicate the members of siginfo that are valid. The rest of the
si_code values are signal independent like SI_USER, SI_KERNEL, SI_QUEUE,
and SI_TIMER and only si_code is needed to indicate which members of
siginfo are valid.
At least that is how POSIX documents them, and how common sense would
indicate they should function. In practice we have been rather sloppy
about maintaining the ABI in linux and we have some exceptions. We have
a couple of buggy architectures that make SI_USER mean something
different when combined with SIGFPE or SIGTRAP. Worse we have
fcntl(F_SETSIG) which results in the si_codes POLL_IN, POLL_OUT,
POLL_MSG, POLL_ERR, POLL_PRI, POLL_HUP being sent with any arbitrary
signal, while the values are in a range that overlaps the signal
specific si_codes.
Thankfully the ambiguous cases are for things no sane persion would do
that so we can rectify the situtation. AKA no one cares so we won't
cause a regression fixing it.
As part of fixing this I stop leaking the __SI_xxxx codes to userspace
and stop storing them in the high 16bits of si_code. Making the kernel
code fundamentally simpler. We have already confirmed that the one
application that would see this difference in kernel behavior CRIU won't
be affected by this change as it copies values verbatim from one kernel
interface to another.
Eric
Eric W. Biederman (8):
signal/alpha: Document a conflict with SI_USER for SIGTRAP
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/testing: Don't look for __SI_FAULT in userspace
signal/x86: Fix SIGSYS handling in copy_siginfo_to_user32
fcntl: Don't use ambiguous SIG_POLL si_codes
signal: Remove kernel interal si_code magic
arch/alpha/include/uapi/asm/siginfo.h | 5 ++
arch/alpha/kernel/traps.c | 6 +-
arch/arm64/kernel/signal32.c | 23 +++---
arch/blackfin/include/uapi/asm/siginfo.h | 30 +++++---
arch/frv/include/uapi/asm/siginfo.h | 2 +-
arch/ia64/include/uapi/asm/siginfo.h | 19 ++---
arch/ia64/kernel/signal.c | 17 ++---
arch/ia64/kernel/traps.c | 4 +-
arch/mips/include/uapi/asm/siginfo.h | 9 ++-
arch/mips/kernel/signal32.c | 19 +++--
arch/mips/kernel/traps.c | 2 +-
arch/parisc/kernel/signal32.c | 31 ++++----
arch/powerpc/kernel/signal_32.c | 20 +++--
arch/s390/kernel/compat_signal.c | 32 ++++----
arch/sparc/include/uapi/asm/siginfo.h | 7 +-
arch/sparc/kernel/signal32.c | 16 ++--
arch/sparc/kernel/traps_32.c | 2 +-
arch/sparc/kernel/traps_64.c | 2 +-
arch/tile/include/uapi/asm/siginfo.h | 4 +-
arch/tile/kernel/compat_signal.c | 18 ++---
arch/tile/kernel/traps.c | 1 -
arch/x86/kernel/signal_compat.c | 22 +++---
fs/fcntl.c | 13 +++-
fs/signalfd.c | 22 ++----
include/asm-generic/siginfo.h | 22 +++---
include/linux/signal.h | 8 ++
include/uapi/asm-generic/siginfo.h | 104 ++++++++++++--------------
kernel/compat.c | 2 -
kernel/exit.c | 6 +-
kernel/ptrace.c | 6 +-
kernel/signal.c | 72 +++++++++++++-----
tools/testing/selftests/x86/mpx-mini-test.c | 3 +-
tools/testing/selftests/x86/protection_keys.c | 13 ++--
33 files changed, 302 insertions(+), 260 deletions(-)
Today sending a signal with rt_sigqueueinfo and receving it on
a signalfd does not work reliably. The issue is that reading
a signalfd instead of returning a siginfo returns a signalfd_siginfo and
the kernel must convert from one to the other.
The kernel does not currently have the code to deduce which union
members of struct siginfo are in use.
In this patchset I fix that by introducing a new function siginfo_layout
that can look at a siginfo and report which union member of struct
siginfo is in use. Before that I clean up how we populate struct
siginfo.
The siginfo structure has two key members si_signo and si_code. Some
si_codes are signal specific and for those it takes si_signo and si_code
to indicate the members of siginfo that are valid. The rest of the
si_code values are signal independent like SI_USER, SI_KERNEL, SI_QUEUE,
and SI_TIMER and only si_code is needed to indicate which members of
siginfo are valid.
At least that is how POSIX documents them, and how common sense would
indicate they should function. In practice we have been rather sloppy
about maintaining the ABI in linux and we have some exceptions. We have
a couple of buggy architectures that make SI_USER mean something
different when combined with SIGFPE or SIGTRAP. Worse we have
fcntl(F_SETSIG) which results in the si_codes POLL_IN, POLL_OUT,
POLL_MSG, POLL_ERR, POLL_PRI, POLL_HUP being sent with any arbitrary
signal, while the values are in a range that overlaps the signal
specific si_codes.
Thankfully the ambiguous cases with the POLL_NNN si_codes are for
things no sane persion would do that so we can rectify the situtation.
AKA no one cares so we won't cause a regression fixing it.
As part of fixing this I stop leaking the __SI_xxxx codes to userspace
and stop storing them in the high 16bits of si_code. Making the kernel
code fundamentally simpler. We have already confirmed that the one
application that would see this difference in kernel behavior CRIU won't
be affected by this change as it copies values verbatim from one kernel
interface to another.
v2:
- Benchmarked the code to confirm no performance changes are visible.
- Reworked the first couple of patches so that TRAP_FIXME and
FPE_FIXME are not exported to userspace.
- Rebased on top of the siginfo cleanup that came in v4.13-rc1
- Updated alpha to use both TRAP_FIXME and FPE_FIXME
Eric W. Biederman (7):
signal/alpha: Document a conflict with SI_USER for SIGTRAP
signal/ia64: Document a conflict with SI_USER with SIGFPE
signal/sparc: Document a conflict with SI_USER with SIGFPE
signal/mips: Document a conflict with SI_USER with SIGFPE
signal/testing: Don't look for __SI_FAULT in userspace
fcntl: Don't use ambiguous SIG_POLL si_codes
signal: Remove kernel interal si_code magic
arch/alpha/include/uapi/asm/siginfo.h | 14 ++++
arch/alpha/kernel/traps.c | 6 +-
arch/arm64/kernel/signal32.c | 23 ++----
arch/blackfin/include/uapi/asm/siginfo.h | 30 ++++---
arch/frv/include/uapi/asm/siginfo.h | 2 +-
arch/ia64/include/uapi/asm/siginfo.h | 21 +++--
arch/ia64/kernel/signal.c | 17 ++--
arch/ia64/kernel/traps.c | 4 +-
arch/mips/include/uapi/asm/siginfo.h | 11 ++-
arch/mips/kernel/signal32.c | 19 ++---
arch/mips/kernel/traps.c | 2 +-
arch/parisc/kernel/signal32.c | 31 ++++---
arch/powerpc/kernel/signal_32.c | 20 ++---
arch/s390/kernel/compat_signal.c | 32 ++++---
arch/sparc/include/uapi/asm/siginfo.h | 9 +-
arch/sparc/kernel/signal32.c | 16 ++--
arch/sparc/kernel/traps_32.c | 2 +-
arch/sparc/kernel/traps_64.c | 2 +-
arch/tile/include/uapi/asm/siginfo.h | 4 +-
arch/tile/kernel/compat_signal.c | 18 ++--
arch/tile/kernel/traps.c | 2 +-
arch/x86/kernel/signal_compat.c | 21 ++---
fs/fcntl.c | 13 ++-
fs/signalfd.c | 22 ++---
include/linux/signal.h | 22 +++++
include/uapi/asm-generic/siginfo.h | 115 +++++++++++---------------
kernel/exit.c | 4 +-
kernel/ptrace.c | 6 +-
kernel/signal.c | 72 ++++++++++++----
tools/testing/selftests/x86/mpx-mini-test.c | 3 +-
tools/testing/selftests/x86/protection_keys.c | 13 ++-
31 files changed, 318 insertions(+), 258 deletions(-)
Setting si_code to __SI_FAULT results in a userspace seeing
an si_code of 0. This is the same si_code as SI_USER. Posix
and common sense requires that SI_USER not be a signal specific
si_code. As such this use of 0 for the si_code is a pretty
horribly broken ABI.
Given that alpha is on it's last legs I don't know that it is worth
fixing this, but it is worth documenting what is going on so that
no one decides to copy this bad decision.
This was introduced during the 2.5 development cycle so this
mess has had a long time for people to be able to depend upon it.
v2: Added FPE_FIXME for alpha as Helge Deller <[email protected]> pointed out
with his alternate patch one of the cases is SIGFPE not SIGTRAP.
Cc: Helge Deller <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: [email protected]
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Ref: 0a635c7a84cf ("Fill in siginfo_t.")
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
arch/alpha/include/uapi/asm/siginfo.h | 14 ++++++++++++++
arch/alpha/kernel/traps.c | 6 +++---
2 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/alpha/include/uapi/asm/siginfo.h b/arch/alpha/include/uapi/asm/siginfo.h
index 9822362a8424..972f547d9e41 100644
--- a/arch/alpha/include/uapi/asm/siginfo.h
+++ b/arch/alpha/include/uapi/asm/siginfo.h
@@ -6,4 +6,18 @@
#include <asm-generic/siginfo.h>
+/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
+/*
+ * SIGTRAP si_codes
+ */
+#ifdef __KERNEL__
+#define TRAP_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
#endif
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index 65bb102d985b..e94f4b73ac04 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -278,7 +278,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
case 1: /* bugcheck */
info.si_signo = SIGTRAP;
info.si_errno = 0;
- info.si_code = __SI_FAULT;
+ info.si_code = TRAP_FIXME;
info.si_addr = (void __user *) regs->pc;
info.si_trapno = 0;
send_sig_info(SIGTRAP, &info, current);
@@ -318,7 +318,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
break;
case GEN_ROPRAND:
signo = SIGFPE;
- code = __SI_FAULT;
+ code = FPE_FIXME;
break;
case GEN_DECOVF:
@@ -340,7 +340,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
case GEN_SUBRNG7:
default:
signo = SIGTRAP;
- code = __SI_FAULT;
+ code = TRAP_FIXME;
break;
}
--
2.10.1
Setting si_code to __SI_FAULT results in a userspace seeing
an si_code of 0. This is the same si_code as SI_USER. Posix
and common sense requires that SI_USER not be a signal specific
si_code. As such this use of 0 for the si_code is a pretty
horribly broken ABI.
This use of of __SI_FAULT is only a decade old. Which compared
to the other pieces of kernel code that has made this mistake
is almost yesterday.
This is probably worth fixing but I don't know mips well enough
to know what si_code to would be the proper one to use.
Cc: Ralf Baechle <[email protected]>
Ref: 948a34cf3988 ("[MIPS] Maintain si_code field properly for FP exceptions")
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
arch/mips/include/uapi/asm/siginfo.h | 7 +++++++
arch/mips/kernel/traps.c | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 8069cf766603..9becfd102132 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -123,4 +123,11 @@ typedef struct siginfo {
#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
+/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
#endif /* _UAPI_ASM_SIGINFO_H */
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index b68b4d0726d3..6c9cca9c5341 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -735,7 +735,7 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
else if (fcr31 & FPU_CSR_INE_X)
si.si_code = FPE_FLTRES;
else
- si.si_code = __SI_FAULT;
+ si.si_code = FPE_FIXME;
force_sig_info(SIGFPE, &si, tsk);
}
--
2.10.1
Fix the debug print statements in these tests where they reference
si_codes and in particular __SI_FAULT. __SI_FAULT is a kernel
internal value and should never be seen by userspace.
While I am in there also fix si_code_str. si_codes are an enumeration
there are not a bitmap so == and not & is the apropriate operation to
test for an si_code.
Cc: Dave Hansen <[email protected]>
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test")
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
tools/testing/selftests/x86/mpx-mini-test.c | 3 +--
tools/testing/selftests/x86/protection_keys.c | 13 ++++++-------
2 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/tools/testing/selftests/x86/mpx-mini-test.c b/tools/testing/selftests/x86/mpx-mini-test.c
index a8df159a8924..ec0f6b45ce8b 100644
--- a/tools/testing/selftests/x86/mpx-mini-test.c
+++ b/tools/testing/selftests/x86/mpx-mini-test.c
@@ -391,8 +391,7 @@ void handler(int signum, siginfo_t *si, void *vucontext)
br_count++;
dprintf1("#BR 0x%jx (total seen: %d)\n", status, br_count);
-#define __SI_FAULT (3 << 16)
-#define SEGV_BNDERR (__SI_FAULT|3) /* failed address bound checks */
+#define SEGV_BNDERR 3 /* failed address bound checks */
dprintf2("Saw a #BR! status 0x%jx at %016lx br_reason: %jx\n",
status, ip, br_reason);
diff --git a/tools/testing/selftests/x86/protection_keys.c b/tools/testing/selftests/x86/protection_keys.c
index 3237bc010e1c..23927845518d 100644
--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -212,19 +212,18 @@ void dump_mem(void *dumpme, int len_bytes)
}
}
-#define __SI_FAULT (3 << 16)
-#define SEGV_BNDERR (__SI_FAULT|3) /* failed address bound checks */
-#define SEGV_PKUERR (__SI_FAULT|4)
+#define SEGV_BNDERR 3 /* failed address bound checks */
+#define SEGV_PKUERR 4
static char *si_code_str(int si_code)
{
- if (si_code & SEGV_MAPERR)
+ if (si_code == SEGV_MAPERR)
return "SEGV_MAPERR";
- if (si_code & SEGV_ACCERR)
+ if (si_code == SEGV_ACCERR)
return "SEGV_ACCERR";
- if (si_code & SEGV_BNDERR)
+ if (si_code == SEGV_BNDERR)
return "SEGV_BNDERR";
- if (si_code & SEGV_PKUERR)
+ if (si_code == SEGV_PKUERR)
return "SEGV_PKUERR";
return "UNKNOWN";
}
--
2.10.1
struct siginfo is a union and the kernel since 2.4 has been hiding a union
tag in the high 16bits of si_code using the values:
__SI_KILL
__SI_TIMER
__SI_POLL
__SI_FAULT
__SI_CHLD
__SI_RT
__SI_MESGQ
__SI_SYS
While this looks plausible on the surface, in practice this situation has
not worked well.
- Injected positive signals are not copied to user space properly
unless they have these magic high bits set.
- Injected positive signals are not reported properly by signalfd
unless they have these magic high bits set.
- These kernel internal values leaked to userspace via ptrace_peek_siginfo
- It was possible to inject these kernel internal values and cause the
the kernel to misbehave.
- Kernel developers got confused and expected these kernel internal values
in userspace in kernel self tests.
- Kernel developers got confused and set si_code to __SI_FAULT which
is SI_USER in userspace which causes userspace to think an ordinary user
sent the signal and that it was not kernel generated.
- The values make it impossible to reorganize the code to transform
siginfo_copy_to_user into a plain copy_to_user. As si_code must
be massaged before being passed to userspace.
So remove these kernel internal si codes and make the kernel code simpler
and more maintainable.
To replace these kernel internal magic si_codes introduce the helper
function siginfo_layout, that takes a signal number and an si_code and
computes which union member of siginfo is being used. Have
siginfo_layout return an enumeration so that gcc will have enough
information to warn if a switch statement does not handle all of union
members.
A couple of architectures have a messed up ABI that defines signal
specific duplications of SI_USER which causes more special cases in
siginfo_layout than I would like. The good news is only problem
architectures pay the cost.
Update all of the code that used the previous magic __SI_ values to
use the new SIL_ values and to call siginfo_layout to get those
values. Escept where not all of the cases are handled remove the
defaults in the switch statements so that if a new case is missed in
the future the lack will show up at compile time.
Modify the code that copies siginfo si_code to userspace to just copy
the value and not cast si_code to a short first. The high bits are no
longer used to hold a magic union member.
Fixup the siginfo header files to stop including the __SI_ values in
their constants and for the headers that were missing it to properly
update the number of si_codes for each signal type.
The fixes to copy_siginfo_from_user32 implementations has the
interesting property that several of them perviously should never have
worked as the __SI_ values they depended up where kernel internal.
With that dependency gone those implementations should work much
better.
The idea of not passing the __SI_ values out to userspace and then
not reinserting them has been tested with criu and criu worked without
changes.
Ref: 2.4.0-test1
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
arch/alpha/include/uapi/asm/siginfo.h | 4 +-
arch/arm64/kernel/signal32.c | 23 +++----
arch/blackfin/include/uapi/asm/siginfo.h | 30 +++++---
arch/frv/include/uapi/asm/siginfo.h | 2 +-
arch/ia64/include/uapi/asm/siginfo.h | 20 +++---
arch/ia64/kernel/signal.c | 17 +++--
arch/mips/include/uapi/asm/siginfo.h | 6 +-
arch/mips/kernel/signal32.c | 19 +++--
arch/parisc/kernel/signal32.c | 31 ++++-----
arch/powerpc/kernel/signal_32.c | 20 +++---
arch/s390/kernel/compat_signal.c | 32 ++++-----
arch/sparc/include/uapi/asm/siginfo.h | 4 +-
arch/sparc/kernel/signal32.c | 16 ++---
arch/tile/include/uapi/asm/siginfo.h | 4 +-
arch/tile/kernel/compat_signal.c | 18 +++--
arch/tile/kernel/traps.c | 2 +-
arch/x86/kernel/signal_compat.c | 21 +++---
fs/signalfd.c | 22 +++---
include/linux/signal.h | 14 ++++
include/uapi/asm-generic/siginfo.h | 115 +++++++++++++------------------
kernel/exit.c | 4 +-
kernel/ptrace.c | 6 +-
kernel/signal.c | 72 ++++++++++++++-----
23 files changed, 257 insertions(+), 245 deletions(-)
diff --git a/arch/alpha/include/uapi/asm/siginfo.h b/arch/alpha/include/uapi/asm/siginfo.h
index 972f547d9e41..70494d1d8f29 100644
--- a/arch/alpha/include/uapi/asm/siginfo.h
+++ b/arch/alpha/include/uapi/asm/siginfo.h
@@ -10,14 +10,14 @@
* SIGFPE si_codes
*/
#ifdef __KERNEL__
-#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#define FPE_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
/*
* SIGTRAP si_codes
*/
#ifdef __KERNEL__
-#define TRAP_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#define TRAP_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
#endif
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index c747a0fc5d7d..9b95a935c21d 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -142,25 +142,25 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
*/
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad,
SI_PAD_SIZE);
- else switch (from->si_code & __SI_MASK) {
- case __SI_KILL:
+ else switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_TIMER:
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
- case __SI_POLL:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_FAULT:
+ case SIL_FAULT:
err |= __put_user((compat_uptr_t)(unsigned long)from->si_addr,
&to->si_addr);
#ifdef BUS_MCEERR_AO
@@ -173,29 +173,24 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb);
#endif
break;
- case __SI_CHLD:
+ case SIL_CHLD:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_status, &to->si_status);
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
break;
- case __SI_RT: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ: /* But this is */
+ case SIL_RT:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_int, &to->si_int);
break;
- case __SI_SYS:
+ case SIL_SYS:
err |= __put_user((compat_uptr_t)(unsigned long)
from->si_call_addr, &to->si_call_addr);
err |= __put_user(from->si_syscall, &to->si_syscall);
err |= __put_user(from->si_arch, &to->si_arch);
break;
- default: /* this is just in case for now ... */
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- break;
}
return err;
}
diff --git a/arch/blackfin/include/uapi/asm/siginfo.h b/arch/blackfin/include/uapi/asm/siginfo.h
index c72f4e6e386f..79dfe3979123 100644
--- a/arch/blackfin/include/uapi/asm/siginfo.h
+++ b/arch/blackfin/include/uapi/asm/siginfo.h
@@ -14,28 +14,36 @@
#define si_uid16 _sifields._kill._uid
-#define ILL_ILLPARAOP (__SI_FAULT|2) /* illegal opcode combine ********** */
-#define ILL_ILLEXCPT (__SI_FAULT|4) /* unrecoverable exception ********** */
-#define ILL_CPLB_VI (__SI_FAULT|9) /* D/I CPLB protect violation ******** */
-#define ILL_CPLB_MISS (__SI_FAULT|10) /* D/I CPLB miss ******** */
-#define ILL_CPLB_MULHIT (__SI_FAULT|11) /* D/I CPLB multiple hit ******** */
+#define ILL_ILLPARAOP 2 /* illegal opcode combine ********** */
+#define ILL_ILLEXCPT 4 /* unrecoverable exception ********** */
+#define ILL_CPLB_VI 9 /* D/I CPLB protect violation ******** */
+#define ILL_CPLB_MISS 10 /* D/I CPLB miss ******** */
+#define ILL_CPLB_MULHIT 11 /* D/I CPLB multiple hit ******** */
+#undef NSIGILL
+#define NSIGILL 11
/*
* SIGBUS si_codes
*/
-#define BUS_OPFETCH (__SI_FAULT|4) /* error from instruction fetch ******** */
+#define BUS_OPFETCH 4 /* error from instruction fetch ******** */
+#undef NSIGBUS
+#define NSIGBUS 4
/*
* SIGTRAP si_codes
*/
-#define TRAP_STEP (__SI_FAULT|1) /* single-step breakpoint************* */
-#define TRAP_TRACEFLOW (__SI_FAULT|2) /* trace buffer overflow ************* */
-#define TRAP_WATCHPT (__SI_FAULT|3) /* watchpoint match ************* */
-#define TRAP_ILLTRAP (__SI_FAULT|4) /* illegal trap ************* */
+#define TRAP_STEP 1 /* single-step breakpoint************* */
+#define TRAP_TRACEFLOW 2 /* trace buffer overflow ************* */
+#define TRAP_WATCHPT 3 /* watchpoint match ************* */
+#define TRAP_ILLTRAP 4 /* illegal trap ************* */
+#undef NSIGTRAP
+#define NSIGTRAP 4
/*
* SIGSEGV si_codes
*/
-#define SEGV_STACKFLOW (__SI_FAULT|3) /* stack overflow */
+#define SEGV_STACKFLOW 3 /* stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV 3
#endif /* _UAPI_BFIN_SIGINFO_H */
diff --git a/arch/frv/include/uapi/asm/siginfo.h b/arch/frv/include/uapi/asm/siginfo.h
index d3fd1ca45653..f55d9e0e9068 100644
--- a/arch/frv/include/uapi/asm/siginfo.h
+++ b/arch/frv/include/uapi/asm/siginfo.h
@@ -4,7 +4,7 @@
#include <linux/types.h>
#include <asm-generic/siginfo.h>
-#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */
+#define FPE_MDAOVF 9 /* media overflow */
#undef NSIGFPE
#define NSIGFPE 9
diff --git a/arch/ia64/include/uapi/asm/siginfo.h b/arch/ia64/include/uapi/asm/siginfo.h
index 3282f8b992fc..33389fc36f23 100644
--- a/arch/ia64/include/uapi/asm/siginfo.h
+++ b/arch/ia64/include/uapi/asm/siginfo.h
@@ -98,9 +98,9 @@ typedef struct siginfo {
/*
* SIGILL si_codes
*/
-#define ILL_BADIADDR (__SI_FAULT|9) /* unimplemented instruction address */
-#define __ILL_BREAK (__SI_FAULT|10) /* illegal break */
-#define __ILL_BNDMOD (__SI_FAULT|11) /* bundle-update (modification) in progress */
+#define ILL_BADIADDR 9 /* unimplemented instruction address */
+#define __ILL_BREAK 10 /* illegal break */
+#define __ILL_BNDMOD 11 /* bundle-update (modification) in progress */
#undef NSIGILL
#define NSIGILL 11
@@ -108,20 +108,20 @@ typedef struct siginfo {
* SIGFPE si_codes
*/
#ifdef __KERNEL__
-#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#define FPE_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
-#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */
-#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */
-#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */
-#define __FPE_INVASC (__SI_FAULT|12) /* invalid ASCII digit */
-#define __FPE_INVDEC (__SI_FAULT|13) /* invalid decimal digit */
+#define __FPE_DECOVF 9 /* decimal overflow */
+#define __FPE_DECDIV 10 /* decimal division by zero */
+#define __FPE_DECERR 11 /* packed decimal error */
+#define __FPE_INVASC 12 /* invalid ASCII digit */
+#define __FPE_INVDEC 13 /* invalid decimal digit */
#undef NSIGFPE
#define NSIGFPE 13
/*
* SIGSEGV si_codes
*/
-#define __SEGV_PSTKOVF (__SI_FAULT|4) /* paragraph stack overflow */
+#define __SEGV_PSTKOVF 4 /* paragraph stack overflow */
#undef NSIGSEGV
#define NSIGSEGV 4
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 5db52c6813c4..6146d53b6ad7 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -124,31 +124,30 @@ copy_siginfo_to_user (siginfo_t __user *to, const siginfo_t *from)
*/
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
- switch (from->si_code >> 16) {
- case __SI_FAULT >> 16:
+ err |= __put_user(from->si_code, &to->si_code);
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_FAULT:
err |= __put_user(from->si_flags, &to->si_flags);
err |= __put_user(from->si_isr, &to->si_isr);
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_addr, &to->si_addr);
err |= __put_user(from->si_imm, &to->si_imm);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_ptr, &to->si_ptr);
break;
- case __SI_RT >> 16: /* Not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_ptr, &to->si_ptr);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
- default:
+ case SIL_KILL:
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_pid, &to->si_pid);
break;
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 9becfd102132..22a86d84a504 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -120,14 +120,14 @@ typedef struct siginfo {
#undef SI_TIMER
#undef SI_MESGQ
#define SI_ASYNCIO -2 /* sent by AIO completion */
-#define SI_TIMER __SI_CODE(__SI_TIMER, -3) /* sent by timer expiration */
-#define SI_MESGQ __SI_CODE(__SI_MESGQ, -4) /* sent by real time mesq state change */
+#define SI_TIMER -3 /* sent by timer expiration */
+#define SI_MESGQ -4 /* sent by real time mesq state change */
/*
* SIGFPE si_codes
*/
#ifdef __KERNEL__
-#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#define FPE_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
#endif /* _UAPI_ASM_SIGINFO_H */
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index 84165f2b31ff..cf5c7c05e5a3 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -93,38 +93,37 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (from->si_code >> 16) {
- case __SI_TIMER >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
- default:
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_int, &to->si_int);
break;
- case __SI_SYS >> 16:
+ case SIL_SYS:
err |= __copy_to_user(&to->si_call_addr, &from->si_call_addr,
sizeof(compat_uptr_t));
err |= __put_user(from->si_syscall, &to->si_syscall);
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index 70aaabb8b3cb..9e0cb6a577d6 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -290,25 +290,25 @@ copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from)
if (to->si_code < 0)
err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (to->si_code >> 16) {
- case __SI_CHLD >> 16:
+ switch (siginfo_layout(to->si_signo, to->si_code)) {
+ case SIL_CHLD:
err |= __get_user(to->si_utime, &from->si_utime);
err |= __get_user(to->si_stime, &from->si_stime);
err |= __get_user(to->si_status, &from->si_status);
default:
+ case SIL_KILL:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __get_user(addr, &from->si_addr);
to->si_addr = compat_ptr(addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __get_user(to->si_band, &from->si_band);
err |= __get_user(to->si_fd, &from->si_fd);
break;
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
err |= __get_user(to->si_int, &from->si_int);
@@ -337,41 +337,40 @@ copy_siginfo_to_user32 (compat_siginfo_t __user *to, const siginfo_t *from)
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (from->si_code >> 16) {
- case __SI_CHLD >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
- default:
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
addr = ptr_to_compat(from->si_addr);
err |= __put_user(addr, &to->si_addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
val = (compat_int_t)from->si_int;
err |= __put_user(val, &to->si_int);
break;
- case __SI_RT >> 16: /* Not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_pid, &to->si_pid);
val = (compat_int_t)from->si_int;
err |= __put_user(val, &to->si_int);
break;
- case __SI_SYS >> 16:
+ case SIL_SYS:
err |= __put_user(ptr_to_compat(from->si_call_addr), &to->si_call_addr);
err |= __put_user(from->si_syscall, &to->si_syscall);
err |= __put_user(from->si_arch, &to->si_arch);
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 97bb1385e771..92fb1c8dbbd8 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -913,42 +913,40 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, const siginfo_t *s)
*/
err = __put_user(s->si_signo, &d->si_signo);
err |= __put_user(s->si_errno, &d->si_errno);
- err |= __put_user((short)s->si_code, &d->si_code);
+ err |= __put_user(s->si_code, &d->si_code);
if (s->si_code < 0)
err |= __copy_to_user(&d->_sifields._pad, &s->_sifields._pad,
SI_PAD_SIZE32);
- else switch(s->si_code >> 16) {
- case __SI_CHLD >> 16:
+ else switch(siginfo_layout(s->si_signo, s->si_code)) {
+ case SIL_CHLD:
err |= __put_user(s->si_pid, &d->si_pid);
err |= __put_user(s->si_uid, &d->si_uid);
err |= __put_user(s->si_utime, &d->si_utime);
err |= __put_user(s->si_stime, &d->si_stime);
err |= __put_user(s->si_status, &d->si_status);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __put_user((unsigned int)(unsigned long)s->si_addr,
&d->si_addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(s->si_band, &d->si_band);
err |= __put_user(s->si_fd, &d->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __put_user(s->si_tid, &d->si_tid);
err |= __put_user(s->si_overrun, &d->si_overrun);
err |= __put_user(s->si_int, &d->si_int);
break;
- case __SI_SYS >> 16:
+ case SIL_SYS:
err |= __put_user(ptr_to_compat(s->si_call_addr), &d->si_call_addr);
err |= __put_user(s->si_syscall, &d->si_syscall);
err |= __put_user(s->si_arch, &d->si_arch);
break;
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(s->si_int, &d->si_int);
/* fallthrough */
- case __SI_KILL >> 16:
- default:
+ case SIL_KILL:
err |= __put_user(s->si_pid, &d->si_pid);
err |= __put_user(s->si_uid, &d->si_uid);
break;
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index c620049c61f2..f549c4657376 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -75,35 +75,34 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (from->si_code >> 16) {
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_RT:
err |= __put_user(from->si_int, &to->si_int);
/* fallthrough */
- case __SI_KILL >> 16:
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __put_user((unsigned long) from->si_addr,
&to->si_addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
@@ -127,32 +126,31 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
if (to->si_code < 0)
err |= __copy_from_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (to->si_code >> 16) {
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ switch (siginfo_layout(to->si_signo, to->si_code)) {
+ case SIL_RT:
err |= __get_user(to->si_int, &from->si_int);
/* fallthrough */
- case __SI_KILL >> 16:
+ case SIL_KILL:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __get_user(to->si_pid, &from->si_pid);
err |= __get_user(to->si_uid, &from->si_uid);
err |= __get_user(to->si_utime, &from->si_utime);
err |= __get_user(to->si_stime, &from->si_stime);
err |= __get_user(to->si_status, &from->si_status);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __get_user(tmp, &from->si_addr);
to->si_addr = (void __force __user *)
(u64) (tmp & PSW32_ADDR_INSN);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __get_user(to->si_band, &from->si_band);
err |= __get_user(to->si_fd, &from->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __get_user(to->si_tid, &from->si_tid);
err |= __get_user(to->si_overrun, &from->si_overrun);
err |= __get_user(to->si_int, &from->si_int);
diff --git a/arch/sparc/include/uapi/asm/siginfo.h b/arch/sparc/include/uapi/asm/siginfo.h
index da2126e0c536..157f46fe374f 100644
--- a/arch/sparc/include/uapi/asm/siginfo.h
+++ b/arch/sparc/include/uapi/asm/siginfo.h
@@ -20,13 +20,13 @@
* SIGFPE si_codes
*/
#ifdef __KERNEL__
-#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#define FPE_FIXME 0 /* Broken dup of SI_USER */
#endif /* __KERNEL__ */
/*
* SIGEMT si_codes
*/
-#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */
+#define EMT_TAGOVF 1 /* tag overflow */
#define NSIGEMT 1
#endif /* _UAPI__SPARC_SIGINFO_H */
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index b4096bb665b2..0e4c08c45a37 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -85,34 +85,34 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
at the same time. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0)
err |= __copy_to_user(&to->_sifields._pad, &from->_sifields._pad, SI_PAD_SIZE);
else {
- switch (from->si_code >> 16) {
- case __SI_TIMER >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_TIMER:
err |= __put_user(from->si_tid, &to->si_tid);
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
default:
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_FAULT >> 16:
+ case SIL_FAULT:
err |= __put_user(from->si_trapno, &to->si_trapno);
err |= __put_user((unsigned long)from->si_addr, &to->si_addr);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_RT >> 16: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_int, &to->si_int);
diff --git a/arch/tile/include/uapi/asm/siginfo.h b/arch/tile/include/uapi/asm/siginfo.h
index 56d661bb010b..e83f931aa1f0 100644
--- a/arch/tile/include/uapi/asm/siginfo.h
+++ b/arch/tile/include/uapi/asm/siginfo.h
@@ -26,8 +26,8 @@
/*
* Additional Tile-specific SIGILL si_codes
*/
-#define ILL_DBLFLT (__SI_FAULT|9) /* double fault */
-#define ILL_HARDWALL (__SI_FAULT|10) /* user networks hardwall violation */
+#define ILL_DBLFLT 9 /* double fault */
+#define ILL_HARDWALL 10 /* user networks hardwall violation */
#undef NSIGILL
#define NSIGILL 10
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 0e863f1ee08c..971d87a1d8cf 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -64,7 +64,7 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *to, const siginfo_t *fr
3 ints plus the relevant union member. */
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
+ err |= __put_user(from->si_code, &to->si_code);
if (from->si_code < 0) {
err |= __put_user(from->si_pid, &to->si_pid);
@@ -77,28 +77,26 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *to, const siginfo_t *fr
*/
err |= __put_user(from->_sifields._pad[0],
&to->_sifields._pad[0]);
- switch (from->si_code >> 16) {
- case __SI_FAULT >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_FAULT:
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
err |= __put_user(from->si_status, &to->si_status);
/* FALL THROUGH */
default:
- case __SI_KILL >> 16:
+ case SIL_KILL:
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
err |= __put_user(from->si_overrun, &to->si_overrun);
err |= __put_user(from->si_int, &to->si_int);
break;
- /* This is not generated by the kernel as of now. */
- case __SI_RT >> 16:
- case __SI_MESGQ >> 16:
+ case SIL_RT:
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_int, &to->si_int);
break;
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 54804866f238..9b08c6055f15 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -188,7 +188,7 @@ static int special_ill(tile_bundle_bits bundle, int *sigp, int *codep)
/* Make it the requested signal. */
*sigp = sig;
- *codep = code | __SI_FAULT;
+ *codep = code;
return 1;
}
diff --git a/arch/x86/kernel/signal_compat.c b/arch/x86/kernel/signal_compat.c
index 71beb28600d4..ab9feb5887b1 100644
--- a/arch/x86/kernel/signal_compat.c
+++ b/arch/x86/kernel/signal_compat.c
@@ -129,7 +129,7 @@ int __copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from,
3 ints plus the relevant union member. */
put_user_ex(from->si_signo, &to->si_signo);
put_user_ex(from->si_errno, &to->si_errno);
- put_user_ex((short)from->si_code, &to->si_code);
+ put_user_ex(from->si_code, &to->si_code);
if (from->si_code < 0) {
put_user_ex(from->si_pid, &to->si_pid);
@@ -142,8 +142,8 @@ int __copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from,
*/
put_user_ex(from->_sifields._pad[0],
&to->_sifields._pad[0]);
- switch (from->si_code >> 16) {
- case __SI_FAULT >> 16:
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_FAULT:
if (from->si_signo == SIGBUS &&
(from->si_code == BUS_MCEERR_AR ||
from->si_code == BUS_MCEERR_AO))
@@ -160,11 +160,11 @@ int __copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from,
put_user_ex(from->si_pkey, &to->si_pkey);
}
break;
- case __SI_SYS >> 16:
+ case SIL_SYS:
put_user_ex(from->si_syscall, &to->si_syscall);
put_user_ex(from->si_arch, &to->si_arch);
break;
- case __SI_CHLD >> 16:
+ case SIL_CHLD:
if (!x32_ABI) {
put_user_ex(from->si_utime, &to->si_utime);
put_user_ex(from->si_stime, &to->si_stime);
@@ -174,21 +174,18 @@ int __copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from,
}
put_user_ex(from->si_status, &to->si_status);
/* FALL THROUGH */
- default:
- case __SI_KILL >> 16:
+ case SIL_KILL:
put_user_ex(from->si_uid, &to->si_uid);
break;
- case __SI_POLL >> 16:
+ case SIL_POLL:
put_user_ex(from->si_fd, &to->si_fd);
break;
- case __SI_TIMER >> 16:
+ case SIL_TIMER:
put_user_ex(from->si_overrun, &to->si_overrun);
put_user_ex(ptr_to_compat(from->si_ptr),
&to->si_ptr);
break;
- /* This is not generated by the kernel as of now. */
- case __SI_RT >> 16:
- case __SI_MESGQ >> 16:
+ case SIL_RT:
put_user_ex(from->si_uid, &to->si_uid);
put_user_ex(from->si_int, &to->si_int);
break;
diff --git a/fs/signalfd.c b/fs/signalfd.c
index 593b022ac11b..d2c434112f42 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -95,23 +95,23 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
*/
err |= __put_user(kinfo->si_signo, &uinfo->ssi_signo);
err |= __put_user(kinfo->si_errno, &uinfo->ssi_errno);
- err |= __put_user((short) kinfo->si_code, &uinfo->ssi_code);
- switch (kinfo->si_code & __SI_MASK) {
- case __SI_KILL:
+ err |= __put_user(kinfo->si_code, &uinfo->ssi_code);
+ switch (siginfo_layout(kinfo->si_signo, kinfo->si_code)) {
+ case SIL_KILL:
err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
break;
- case __SI_TIMER:
+ case SIL_TIMER:
err |= __put_user(kinfo->si_tid, &uinfo->ssi_tid);
err |= __put_user(kinfo->si_overrun, &uinfo->ssi_overrun);
err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
break;
- case __SI_POLL:
+ case SIL_POLL:
err |= __put_user(kinfo->si_band, &uinfo->ssi_band);
err |= __put_user(kinfo->si_fd, &uinfo->ssi_fd);
break;
- case __SI_FAULT:
+ case SIL_FAULT:
err |= __put_user((long) kinfo->si_addr, &uinfo->ssi_addr);
#ifdef __ARCH_SI_TRAPNO
err |= __put_user(kinfo->si_trapno, &uinfo->ssi_trapno);
@@ -128,20 +128,14 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
&uinfo->ssi_addr_lsb);
#endif
break;
- case __SI_CHLD:
+ case SIL_CHLD:
err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
err |= __put_user(kinfo->si_status, &uinfo->ssi_status);
err |= __put_user(kinfo->si_utime, &uinfo->ssi_utime);
err |= __put_user(kinfo->si_stime, &uinfo->ssi_stime);
break;
- case __SI_RT: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ: /* But this is */
- err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
- err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
- err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
- err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
- break;
+ case SIL_RT:
default:
/*
* This case catches also the signals queued by sigqueue().
diff --git a/include/linux/signal.h b/include/linux/signal.h
index c97cc20369c0..38564e3e54c7 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -21,6 +21,20 @@ static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
int copy_siginfo_to_user(struct siginfo __user *to, const struct siginfo *from);
+enum siginfo_layout {
+ SIL_KILL,
+ SIL_TIMER,
+ SIL_POLL,
+ SIL_FAULT,
+ SIL_CHLD,
+ SIL_RT,
+#ifdef __ARCH_SIGSYS
+ SIL_SYS,
+#endif
+};
+
+enum siginfo_layout siginfo_layout(int sig, int si_code);
+
/*
* Define some primitives to manipulate sigset_t.
*/
diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h
index 9e956ea94d57..e5aa6794cea4 100644
--- a/include/uapi/asm-generic/siginfo.h
+++ b/include/uapi/asm-generic/siginfo.h
@@ -151,29 +151,6 @@ typedef struct siginfo {
#define si_arch _sifields._sigsys._arch
#endif
-#ifdef __KERNEL__
-#define __SI_MASK 0xffff0000u
-#define __SI_KILL (0 << 16)
-#define __SI_TIMER (1 << 16)
-#define __SI_POLL (2 << 16)
-#define __SI_FAULT (3 << 16)
-#define __SI_CHLD (4 << 16)
-#define __SI_RT (5 << 16)
-#define __SI_MESGQ (6 << 16)
-#define __SI_SYS (7 << 16)
-#define __SI_CODE(T,N) ((T) | ((N) & 0xffff))
-#else /* __KERNEL__ */
-#define __SI_KILL 0
-#define __SI_TIMER 0
-#define __SI_POLL 0
-#define __SI_FAULT 0
-#define __SI_CHLD 0
-#define __SI_RT 0
-#define __SI_MESGQ 0
-#define __SI_SYS 0
-#define __SI_CODE(T,N) (N)
-#endif /* __KERNEL__ */
-
/*
* si_code values
* Digital reserves positive values for kernel-generated signals.
@@ -181,10 +158,10 @@ typedef struct siginfo {
#define SI_USER 0 /* sent by kill, sigsend, raise */
#define SI_KERNEL 0x80 /* sent by the kernel from somewhere */
#define SI_QUEUE -1 /* sent by sigqueue */
-#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
-#define SI_MESGQ __SI_CODE(__SI_MESGQ,-3) /* sent by real time mesq state change */
+#define SI_TIMER -2 /* sent by timer expiration */
+#define SI_MESGQ -3 /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
-#define SI_SIGIO __SI_CODE(__SI_POLL,-5) /* sent by queued SIGIO */
+#define SI_SIGIO -5 /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
@@ -194,86 +171,86 @@ typedef struct siginfo {
/*
* SIGILL si_codes
*/
-#define ILL_ILLOPC (__SI_FAULT|1) /* illegal opcode */
-#define ILL_ILLOPN (__SI_FAULT|2) /* illegal operand */
-#define ILL_ILLADR (__SI_FAULT|3) /* illegal addressing mode */
-#define ILL_ILLTRP (__SI_FAULT|4) /* illegal trap */
-#define ILL_PRVOPC (__SI_FAULT|5) /* privileged opcode */
-#define ILL_PRVREG (__SI_FAULT|6) /* privileged register */
-#define ILL_COPROC (__SI_FAULT|7) /* coprocessor error */
-#define ILL_BADSTK (__SI_FAULT|8) /* internal stack error */
+#define ILL_ILLOPC 1 /* illegal opcode */
+#define ILL_ILLOPN 2 /* illegal operand */
+#define ILL_ILLADR 3 /* illegal addressing mode */
+#define ILL_ILLTRP 4 /* illegal trap */
+#define ILL_PRVOPC 5 /* privileged opcode */
+#define ILL_PRVREG 6 /* privileged register */
+#define ILL_COPROC 7 /* coprocessor error */
+#define ILL_BADSTK 8 /* internal stack error */
#define NSIGILL 8
/*
* SIGFPE si_codes
*/
-#define FPE_INTDIV (__SI_FAULT|1) /* integer divide by zero */
-#define FPE_INTOVF (__SI_FAULT|2) /* integer overflow */
-#define FPE_FLTDIV (__SI_FAULT|3) /* floating point divide by zero */
-#define FPE_FLTOVF (__SI_FAULT|4) /* floating point overflow */
-#define FPE_FLTUND (__SI_FAULT|5) /* floating point underflow */
-#define FPE_FLTRES (__SI_FAULT|6) /* floating point inexact result */
-#define FPE_FLTINV (__SI_FAULT|7) /* floating point invalid operation */
-#define FPE_FLTSUB (__SI_FAULT|8) /* subscript out of range */
+#define FPE_INTDIV 1 /* integer divide by zero */
+#define FPE_INTOVF 2 /* integer overflow */
+#define FPE_FLTDIV 3 /* floating point divide by zero */
+#define FPE_FLTOVF 4 /* floating point overflow */
+#define FPE_FLTUND 5 /* floating point underflow */
+#define FPE_FLTRES 6 /* floating point inexact result */
+#define FPE_FLTINV 7 /* floating point invalid operation */
+#define FPE_FLTSUB 8 /* subscript out of range */
#define NSIGFPE 8
/*
* SIGSEGV si_codes
*/
-#define SEGV_MAPERR (__SI_FAULT|1) /* address not mapped to object */
-#define SEGV_ACCERR (__SI_FAULT|2) /* invalid permissions for mapped object */
-#define SEGV_BNDERR (__SI_FAULT|3) /* failed address bound checks */
-#define SEGV_PKUERR (__SI_FAULT|4) /* failed protection key checks */
+#define SEGV_MAPERR 1 /* address not mapped to object */
+#define SEGV_ACCERR 2 /* invalid permissions for mapped object */
+#define SEGV_BNDERR 3 /* failed address bound checks */
+#define SEGV_PKUERR 4 /* failed protection key checks */
#define NSIGSEGV 4
/*
* SIGBUS si_codes
*/
-#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
-#define BUS_ADRERR (__SI_FAULT|2) /* non-existent physical address */
-#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
+#define BUS_ADRALN 1 /* invalid address alignment */
+#define BUS_ADRERR 2 /* non-existent physical address */
+#define BUS_OBJERR 3 /* object specific hardware error */
/* hardware memory error consumed on a machine check: action required */
-#define BUS_MCEERR_AR (__SI_FAULT|4)
+#define BUS_MCEERR_AR 4
/* hardware memory error detected in process but not consumed: action optional*/
-#define BUS_MCEERR_AO (__SI_FAULT|5)
+#define BUS_MCEERR_AO 5
#define NSIGBUS 5
/*
* SIGTRAP si_codes
*/
-#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
-#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
-#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
-#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
+#define TRAP_BRKPT 1 /* process breakpoint */
+#define TRAP_TRACE 2 /* process trace trap */
+#define TRAP_BRANCH 3 /* process taken branch trap */
+#define TRAP_HWBKPT 4 /* hardware breakpoint/watchpoint */
#define NSIGTRAP 4
/*
* SIGCHLD si_codes
*/
-#define CLD_EXITED (__SI_CHLD|1) /* child has exited */
-#define CLD_KILLED (__SI_CHLD|2) /* child was killed */
-#define CLD_DUMPED (__SI_CHLD|3) /* child terminated abnormally */
-#define CLD_TRAPPED (__SI_CHLD|4) /* traced child has trapped */
-#define CLD_STOPPED (__SI_CHLD|5) /* child has stopped */
-#define CLD_CONTINUED (__SI_CHLD|6) /* stopped child has continued */
+#define CLD_EXITED 1 /* child has exited */
+#define CLD_KILLED 2 /* child was killed */
+#define CLD_DUMPED 3 /* child terminated abnormally */
+#define CLD_TRAPPED 4 /* traced child has trapped */
+#define CLD_STOPPED 5 /* child has stopped */
+#define CLD_CONTINUED 6 /* stopped child has continued */
#define NSIGCHLD 6
/*
* SIGPOLL (or any other signal without signal specific si_codes) si_codes
*/
-#define POLL_IN (__SI_POLL|1) /* data input available */
-#define POLL_OUT (__SI_POLL|2) /* output buffers available */
-#define POLL_MSG (__SI_POLL|3) /* input message available */
-#define POLL_ERR (__SI_POLL|4) /* i/o error */
-#define POLL_PRI (__SI_POLL|5) /* high priority input available */
-#define POLL_HUP (__SI_POLL|6) /* device disconnected */
+#define POLL_IN 1 /* data input available */
+#define POLL_OUT 2 /* output buffers available */
+#define POLL_MSG 3 /* input message available */
+#define POLL_ERR 4 /* i/o error */
+#define POLL_PRI 5 /* high priority input available */
+#define POLL_HUP 6 /* device disconnected */
#define NSIGPOLL 6
/*
* SIGSYS si_codes
*/
-#define SYS_SECCOMP (__SI_SYS|1) /* seccomp triggered */
-#define NSIGSYS 1
+#define SYS_SECCOMP 1 /* seccomp triggered */
+#define NSIGSYS 1
/*
* sigevent definitions
diff --git a/kernel/exit.c b/kernel/exit.c
index c5548faa9f37..c8f23613df5b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1616,7 +1616,7 @@ SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
user_access_begin();
unsafe_put_user(signo, &infop->si_signo, Efault);
unsafe_put_user(0, &infop->si_errno, Efault);
- unsafe_put_user((short)info.cause, &infop->si_code, Efault);
+ unsafe_put_user(info.cause, &infop->si_code, Efault);
unsafe_put_user(info.pid, &infop->si_pid, Efault);
unsafe_put_user(info.uid, &infop->si_uid, Efault);
unsafe_put_user(info.status, &infop->si_status, Efault);
@@ -1742,7 +1742,7 @@ COMPAT_SYSCALL_DEFINE5(waitid,
user_access_begin();
unsafe_put_user(signo, &infop->si_signo, Efault);
unsafe_put_user(0, &infop->si_errno, Efault);
- unsafe_put_user((short)info.cause, &infop->si_code, Efault);
+ unsafe_put_user(info.cause, &infop->si_code, Efault);
unsafe_put_user(info.pid, &infop->si_pid, Efault);
unsafe_put_user(info.uid, &infop->si_uid, Efault);
unsafe_put_user(info.status, &infop->si_status, Efault);
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 60f356d91060..84b1367935e4 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -728,8 +728,7 @@ static int ptrace_peek_siginfo(struct task_struct *child,
if (unlikely(in_compat_syscall())) {
compat_siginfo_t __user *uinfo = compat_ptr(data);
- if (copy_siginfo_to_user32(uinfo, &info) ||
- __put_user(info.si_code, &uinfo->si_code)) {
+ if (copy_siginfo_to_user32(uinfo, &info)) {
ret = -EFAULT;
break;
}
@@ -739,8 +738,7 @@ static int ptrace_peek_siginfo(struct task_struct *child,
{
siginfo_t __user *uinfo = (siginfo_t __user *) data;
- if (copy_siginfo_to_user(uinfo, &info) ||
- __put_user(info.si_code, &uinfo->si_code)) {
+ if (copy_siginfo_to_user(uinfo, &info)) {
ret = -EFAULT;
break;
}
diff --git a/kernel/signal.c b/kernel/signal.c
index caed9133ae52..6bd53c8189f0 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2682,6 +2682,51 @@ COMPAT_SYSCALL_DEFINE2(rt_sigpending, compat_sigset_t __user *, uset,
}
#endif
+enum siginfo_layout siginfo_layout(int sig, int si_code)
+{
+ enum siginfo_layout layout = SIL_KILL;
+ if ((si_code > SI_USER) && (si_code < SI_KERNEL)) {
+ static const struct {
+ unsigned char limit, layout;
+ } filter[] = {
+ [SIGILL] = { NSIGILL, SIL_FAULT },
+ [SIGFPE] = { NSIGFPE, SIL_FAULT },
+ [SIGSEGV] = { NSIGSEGV, SIL_FAULT },
+ [SIGBUS] = { NSIGBUS, SIL_FAULT },
+ [SIGTRAP] = { NSIGTRAP, SIL_FAULT },
+#if defined(SIGMET) && defined(NSIGEMT)
+ [SIGEMT] = { NSIGEMT, SIL_FAULT },
+#endif
+ [SIGCHLD] = { NSIGCHLD, SIL_CHLD },
+ [SIGPOLL] = { NSIGPOLL, SIL_POLL },
+#ifdef __ARCH_SIGSYS
+ [SIGSYS] = { NSIGSYS, SIL_SYS },
+#endif
+ };
+ if ((sig < ARRAY_SIZE(filter)) && (si_code <= filter[sig].limit))
+ layout = filter[sig].layout;
+ else if (si_code <= NSIGPOLL)
+ layout = SIL_POLL;
+ } else {
+ if (si_code == SI_TIMER)
+ layout = SIL_TIMER;
+ else if (si_code == SI_SIGIO)
+ layout = SIL_POLL;
+ else if (si_code < 0)
+ layout = SIL_RT;
+ /* Tests to support buggy kernel ABIs */
+#ifdef TRAP_FIXME
+ if ((sig == SIGTRAP) && (si_code == TRAP_FIXME))
+ layout = SIL_FAULT;
+#endif
+#ifdef FPE_FIXME
+ if ((sig == SIGFPE) && (si_code == FPE_FIXME))
+ layout = SIL_FAULT;
+#endif
+ }
+ return layout;
+}
+
#ifndef HAVE_ARCH_COPY_SIGINFO_TO_USER
int copy_siginfo_to_user(siginfo_t __user *to, const siginfo_t *from)
@@ -2704,22 +2749,20 @@ int copy_siginfo_to_user(siginfo_t __user *to, const siginfo_t *from)
*/
err = __put_user(from->si_signo, &to->si_signo);
err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
- switch (from->si_code & __SI_MASK) {
- case __SI_KILL:
+ err |= __put_user(from->si_code, &to->si_code);
+ switch (siginfo_layout(from->si_signo, from->si_code)) {
+ case SIL_KILL:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
break;
- case __SI_TIMER:
- err |= __put_user(from->si_tid, &to->si_tid);
- err |= __put_user(from->si_overrun, &to->si_overrun);
- err |= __put_user(from->si_ptr, &to->si_ptr);
+ case SIL_TIMER:
+ /* Unreached SI_TIMER is negative */
break;
- case __SI_POLL:
+ case SIL_POLL:
err |= __put_user(from->si_band, &to->si_band);
err |= __put_user(from->si_fd, &to->si_fd);
break;
- case __SI_FAULT:
+ case SIL_FAULT:
err |= __put_user(from->si_addr, &to->si_addr);
#ifdef __ARCH_SI_TRAPNO
err |= __put_user(from->si_trapno, &to->si_trapno);
@@ -2744,30 +2787,25 @@ int copy_siginfo_to_user(siginfo_t __user *to, const siginfo_t *from)
err |= __put_user(from->si_pkey, &to->si_pkey);
#endif
break;
- case __SI_CHLD:
+ case SIL_CHLD:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_status, &to->si_status);
err |= __put_user(from->si_utime, &to->si_utime);
err |= __put_user(from->si_stime, &to->si_stime);
break;
- case __SI_RT: /* This is not generated by the kernel as of now. */
- case __SI_MESGQ: /* But this is */
+ case SIL_RT:
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user(from->si_ptr, &to->si_ptr);
break;
#ifdef __ARCH_SIGSYS
- case __SI_SYS:
+ case SIL_SYS:
err |= __put_user(from->si_call_addr, &to->si_call_addr);
err |= __put_user(from->si_syscall, &to->si_syscall);
err |= __put_user(from->si_arch, &to->si_arch);
break;
#endif
- default: /* this is just in case for now ... */
- err |= __put_user(from->si_pid, &to->si_pid);
- err |= __put_user(from->si_uid, &to->si_uid);
- break;
}
return err;
}
--
2.10.1
We have a weird and problematic intersection of features that when
they all come together result in ambiguous siginfo values, that
we can not support properly.
- Supporting fcntl(F_SETSIG,...) with arbitrary valid signals.
- Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc
that imply they are signal specific si_codes and using the
aforementioned arbitrary signal to deliver them.
- Supporting injection of arbitrary siginfo values for debugging and
checkpoint/restore.
The result is that just looking at siginfo si_codes of 1 to 6 are
ambigious. It could either be a signal specific si_code or it could
be a generic si_code.
For most of the kernel this is a non-issue but for sending signals
with siginfo it is impossible to play back the kernel signals and
get the same result.
Strictly speaking when the si_code was changed from SI_SIGIO to
POLL_IN and friends between 2.2 and 2.4 this functionality was not
ambiguous, as only real time signals were supported. Before 2.4 was
released the kernel began supporting siginfo with non realtime signals
so they could give details of why the signal was sent.
The result is that if F_SETSIG is set to one of the signals with signal
specific si_codes then user space can not know why the signal was sent.
I grepped through a bunch of userspace programs using debian code
search to get a feel for how often people choose a signal that results
in an ambiguous si_code. I only found one program doing so and it was
using SIGCHLD to test the F_SETSIG functionality, and did not appear
to be a real world usage.
Therefore the ambiguity does not appears to be a real world problem in
practice. Remove the ambiguity while introducing the smallest chance
of breakage by changing the si_code to SI_SIGIO when signals with
signal specific si_codes are targeted.
Fixes: v2.3.40 -- Added support for queueing non-rt signals
Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
fs/fcntl.c | 13 ++++++++++++-
include/linux/signal.h | 8 ++++++++
include/uapi/asm-generic/siginfo.h | 4 ++--
3 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 3b01b646e528..cfee2e084dbb 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -741,10 +741,21 @@ static void send_sigio_to_task(struct task_struct *p,
si.si_signo = signum;
si.si_errno = 0;
si.si_code = reason;
+ /*
+ * Posix definies POLL_IN and friends to be signal
+ * specific si_codes for SIG_POLL. Linux extended
+ * these si_codes to other signals in a way that is
+ * ambiguous if other signals also have signal
+ * specific si_codes. In that case use SI_SIGIO instead
+ * to remove the ambiguity.
+ */
+ if (sig_specific_sicodes(signum))
+ si.si_code = SI_SIGIO;
+
/* Make sure we are called with one of the POLL_*
reasons, otherwise we could leak kernel stack into
userspace. */
- BUG_ON((reason & __SI_MASK) != __SI_POLL);
+ BUG_ON((reason < POLL_IN) || (reason > NSIGPOLL));
if (reason - POLL_IN >= NSIGPOLL)
si.si_band = ~0L;
else
diff --git a/include/linux/signal.h b/include/linux/signal.h
index e2678b5dbb21..c97cc20369c0 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -380,10 +380,18 @@ int unhandled_signal(struct task_struct *tsk, int sig);
rt_sigmask(SIGCONT) | rt_sigmask(SIGCHLD) | \
rt_sigmask(SIGWINCH) | rt_sigmask(SIGURG) )
+#define SIG_SPECIFIC_SICODES_MASK (\
+ rt_sigmask(SIGILL) | rt_sigmask(SIGFPE) | \
+ rt_sigmask(SIGSEGV) | rt_sigmask(SIGBUS) | \
+ rt_sigmask(SIGTRAP) | rt_sigmask(SIGCHLD) | \
+ rt_sigmask(SIGPOLL) | rt_sigmask(SIGSYS) | \
+ SIGEMT_MASK )
+
#define sig_kernel_only(sig) siginmask(sig, SIG_KERNEL_ONLY_MASK)
#define sig_kernel_coredump(sig) siginmask(sig, SIG_KERNEL_COREDUMP_MASK)
#define sig_kernel_ignore(sig) siginmask(sig, SIG_KERNEL_IGNORE_MASK)
#define sig_kernel_stop(sig) siginmask(sig, SIG_KERNEL_STOP_MASK)
+#define sig_specific_sicodes(sig) siginmask(sig, SIG_SPECIFIC_SICODES_MASK)
#define sig_fatal(t, signr) \
(!siginmask(signr, SIG_KERNEL_IGNORE_MASK|SIG_KERNEL_STOP_MASK) && \
diff --git a/include/uapi/asm-generic/siginfo.h b/include/uapi/asm-generic/siginfo.h
index 9c4eca6b374a..9e956ea94d57 100644
--- a/include/uapi/asm-generic/siginfo.h
+++ b/include/uapi/asm-generic/siginfo.h
@@ -184,7 +184,7 @@ typedef struct siginfo {
#define SI_TIMER __SI_CODE(__SI_TIMER,-2) /* sent by timer expiration */
#define SI_MESGQ __SI_CODE(__SI_MESGQ,-3) /* sent by real time mesq state change */
#define SI_ASYNCIO -4 /* sent by AIO completion */
-#define SI_SIGIO -5 /* sent by queued SIGIO */
+#define SI_SIGIO __SI_CODE(__SI_POLL,-5) /* sent by queued SIGIO */
#define SI_TKILL -6 /* sent by tkill system call */
#define SI_DETHREAD -7 /* sent by execve() killing subsidiary threads */
@@ -259,7 +259,7 @@ typedef struct siginfo {
#define NSIGCHLD 6
/*
- * SIGPOLL si_codes
+ * SIGPOLL (or any other signal without signal specific si_codes) si_codes
*/
#define POLL_IN (__SI_POLL|1) /* data input available */
#define POLL_OUT (__SI_POLL|2) /* output buffers available */
--
2.10.1
Setting si_code to __SI_FAULT results in a userspace seeing
an si_code of 0. This is the same si_code as SI_USER. Posix
and common sense requires that SI_USER not be a signal specific
si_code. As such this use of 0 for the si_code is a pretty
horribly broken ABI.
This was introduced in 2.3.41 so this mess has had a long time for
people to be able to start depending on it.
As this bug has existed for 17 years already I don't know if it is
worth fixing. It is definitely worth documenting what is going
on so that no one decides to copy this bad decision.
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
arch/sparc/include/uapi/asm/siginfo.h | 7 +++++++
arch/sparc/kernel/traps_32.c | 2 +-
arch/sparc/kernel/traps_64.c | 2 +-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/sparc/include/uapi/asm/siginfo.h b/arch/sparc/include/uapi/asm/siginfo.h
index 2d9b79ccaa50..da2126e0c536 100644
--- a/arch/sparc/include/uapi/asm/siginfo.h
+++ b/arch/sparc/include/uapi/asm/siginfo.h
@@ -17,6 +17,13 @@
#define SI_NOINFO 32767 /* no information in siginfo_t */
/*
+ * SIGFPE si_codes
+ */
+#ifdef __KERNEL__
+#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
+
+/*
* SIGEMT si_codes
*/
#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 466d4aed06c7..581cf35ee7e3 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -306,7 +306,7 @@ void do_fpe_trap(struct pt_regs *regs, unsigned long pc, unsigned long npc,
info.si_errno = 0;
info.si_addr = (void __user *)pc;
info.si_trapno = 0;
- info.si_code = __SI_FAULT;
+ info.si_code = FPE_FIXME;
if ((fsr & 0x1c000) == (1 << 14)) {
if (fsr & 0x10)
info.si_code = FPE_FLTINV;
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 196ee5eb4d48..e882e128faa3 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -2258,7 +2258,7 @@ static void do_fpe_common(struct pt_regs *regs)
info.si_errno = 0;
info.si_addr = (void __user *)regs->tpc;
info.si_trapno = 0;
- info.si_code = __SI_FAULT;
+ info.si_code = FPE_FIXME;
if ((fsr & 0x1c000) == (1 << 14)) {
if (fsr & 0x10)
info.si_code = FPE_FLTINV;
--
2.10.1
Setting si_code to __SI_FAULT results in a userspace seeing
an si_code of 0. This is the same si_code as SI_USER. Posix
and common sense requires that SI_USER not be a signal specific
si_code. As such this use of 0 for the si_code is a pretty
horribly broken ABI.
Given that ia64 is on it's last legs I don't know that it is worth
fixing this, but it is worth documenting what is going on so that
no one decides to copy this bad decision.
This was introduced in 2.3.51 so this mess has had a long time for
people to be able to start depending on it.
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: [email protected]
Signed-off-by: "Eric W. Biederman" <[email protected]>
---
arch/ia64/include/uapi/asm/siginfo.h | 3 +++
arch/ia64/kernel/traps.c | 4 ++--
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/ia64/include/uapi/asm/siginfo.h b/arch/ia64/include/uapi/asm/siginfo.h
index 4694c64252d6..3282f8b992fc 100644
--- a/arch/ia64/include/uapi/asm/siginfo.h
+++ b/arch/ia64/include/uapi/asm/siginfo.h
@@ -107,6 +107,9 @@ typedef struct siginfo {
/*
* SIGFPE si_codes
*/
+#ifdef __KERNEL__
+#define FPE_FIXME (__SI_FAULT|0) /* Broken dup of SI_USER */
+#endif /* __KERNEL__ */
#define __FPE_DECOVF (__SI_FAULT|9) /* decimal overflow */
#define __FPE_DECDIV (__SI_FAULT|10) /* decimal division by zero */
#define __FPE_DECERR (__SI_FAULT|11) /* packed decimal error */
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index 7b1fe9462158..3cb17cf9b362 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -349,7 +349,7 @@ handle_fpu_swa (int fp_fault, struct pt_regs *regs, unsigned long isr)
}
siginfo.si_signo = SIGFPE;
siginfo.si_errno = 0;
- siginfo.si_code = __SI_FAULT; /* default code */
+ siginfo.si_code = FPE_FIXME; /* default code */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
if (isr & 0x11) {
siginfo.si_code = FPE_FLTINV;
@@ -373,7 +373,7 @@ handle_fpu_swa (int fp_fault, struct pt_regs *regs, unsigned long isr)
/* raise exception */
siginfo.si_signo = SIGFPE;
siginfo.si_errno = 0;
- siginfo.si_code = __SI_FAULT; /* default code */
+ siginfo.si_code = FPE_FIXME; /* default code */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
if (isr & 0x880) {
siginfo.si_code = FPE_FLTOVF;
--
2.10.1
On Tue, Jul 18, 2017 at 7:06 AM, Eric W. Biederman
<[email protected]> wrote:
> struct siginfo is a union and the kernel since 2.4 has been hiding a union
> tag in the high 16bits of si_code using the values:
> __SI_KILL
> __SI_TIMER
> __SI_POLL
> __SI_FAULT
> __SI_CHLD
> __SI_RT
> __SI_MESGQ
> __SI_SYS
>
> While this looks plausible on the surface, in practice this situation has
> not worked well.
So on the whole I think we just need to do this, but the part I really
hate about this series is still this the siginfo_layout() part.
I can well believe that it is needed for the compat case. siginfo is a
piece of crap crazy type, and re-ordering fields for compat is
something we are always going to have to do.
But for the native case, the *only* reason we do not just copy the
siginfo as-is seems to be that it's just too big, due to other bad
design decisions in siginfo ("let's make sure it's big enough by
allocating 512 bytes for it).
And afaik, absolutely nobody uses more than about 36 bytes of that
512-byte _sifields union (and that one use is SIGILL with three
pointers and three integers and some padding.
So why don't we just say "screw this idiotic layout crap, and just
unconditionally copy that much smaller maximum of bytes"?
Leave that layout thing purely for compat handling.
Yes, yes, there's a couple of small gotchas's:
- "_sys_private" for posix timers, and it would have to be moved to
the end of the structure so that it doesn't get copied.
- make sure those 36 bytes are cleared when allocating the siginfo
(this should be trivial) so that we don't leak any other memory.
But on the whole, it looks pretty straightforward to just get rid of
those stupid layout things, and make them purely about compat stuff.
Please?
The si_code stuff clearly needs to be done regardless, so much of this
patch series looks good to me. But if we're doign this cleanup, can't
we please go that one extra step and get rid of the crazy "let's treat
the union as different types", and just treat it as a largely opaque
thing.
Pretty please?
Linus
Linus Torvalds <[email protected]> writes:
> On Tue, Jul 18, 2017 at 7:06 AM, Eric W. Biederman
> <[email protected]> wrote:
>> struct siginfo is a union and the kernel since 2.4 has been hiding a union
>> tag in the high 16bits of si_code using the values:
>> __SI_KILL
>> __SI_TIMER
>> __SI_POLL
>> __SI_FAULT
>> __SI_CHLD
>> __SI_RT
>> __SI_MESGQ
>> __SI_SYS
>>
>> While this looks plausible on the surface, in practice this situation has
>> not worked well.
>
> So on the whole I think we just need to do this, but the part I really
> hate about this series is still this the siginfo_layout() part.
>
> I can well believe that it is needed for the compat case. siginfo is a
> piece of crap crazy type, and re-ordering fields for compat is
> something we are always going to have to do.
>
> But for the native case, the *only* reason we do not just copy the
> siginfo as-is seems to be that it's just too big, due to other bad
> design decisions in siginfo ("let's make sure it's big enough by
> allocating 512 bytes for it).
>
> And afaik, absolutely nobody uses more than about 36 bytes of that
> 512-byte _sifields union (and that one use is SIGILL with three
> pointers and three integers and some padding.
>
> So why don't we just say "screw this idiotic layout crap, and just
> unconditionally copy that much smaller maximum of bytes"?
>
> Leave that layout thing purely for compat handling.
I completely agree.
> Yes, yes, there's a couple of small gotchas's:
>
> - "_sys_private" for posix timers, and it would have to be moved to
> the end of the structure so that it doesn't get copied.
I don't think we actually need _sys_private at all.
I think the best solution would involve embedding struct siginfo
into struct k_itimer (as we always allocate one). Then we can just
perform container_of on the siginfo and look at the k_itimer instead.
> - make sure those 36 bytes are cleared when allocating the siginfo
> (this should be trivial) so that we don't leak any other memory.
>
> But on the whole, it looks pretty straightforward to just get rid of
> those stupid layout things, and make them purely about compat stuff.
>
> Please?
>
> The si_code stuff clearly needs to be done regardless, so much of this
> patch series looks good to me. But if we're doign this cleanup, can't
> we please go that one extra step and get rid of the crazy "let's treat
> the union as different types", and just treat it as a largely opaque
> thing.
>
> Pretty please?
That is my next step.
I have started on it but it is a big additional patch. I have to insert
a bunch of memsets to ensure we are not copying unitialized stack
contents to userspace.
I have been convinced not to expect any performance issues:
- Worst case two reads from memory 60ns*2 = 120ns.
- 650ns time to send a signal.
- 350ns time to receive a signal.
So that is maybe a 10% change, and more likely lost completely
in the noise.
I intend to measure the performance change just copying it all to see if
I even need to optimize to just copy the needed 36 bytes.
The diffstat for introducing a clear_siginfo to ensure we have made
those memsets is huge so I am worried about introducing bugs along
the way or missing something.
arch/alpha/kernel/osf_sys.c | 1 +
arch/alpha/kernel/signal.c | 2 ++
arch/alpha/kernel/traps.c | 5 ++++
arch/alpha/mm/fault.c | 2 ++
arch/arc/kernel/traps.c | 14 ++++++----
arch/arc/mm/fault.c | 1 +
arch/arm/kernel/ptrace.c | 2 ++
arch/arm/kernel/swp_emulate.c | 1 +
arch/arm/kernel/traps.c | 5 ++++
arch/arm/mm/alignment.c | 1 +
arch/arm/mm/fault.c | 3 ++
arch/arm/vfp/vfpmodule.c | 2 +-
arch/arm64/kernel/debug-monitors.c | 13 +++++----
arch/arm64/kernel/fpsimd.c | 2 +-
arch/arm64/kernel/ptrace.c | 13 +++++----
arch/arm64/kernel/traps.c | 2 ++
arch/arm64/mm/fault.c | 4 +++
arch/blackfin/kernel/traps.c | 1 +
arch/c6x/kernel/traps.c | 1 +
arch/cris/mm/fault.c | 1 +
arch/frv/kernel/traps.c | 7 +++++
arch/frv/mm/fault.c | 1 +
arch/hexagon/kernel/traps.c | 1 +
arch/hexagon/mm/vm_fault.c | 2 ++
arch/ia64/kernel/brl_emu.c | 3 ++
arch/ia64/kernel/signal.c | 2 ++
arch/ia64/kernel/traps.c | 3 +-
arch/ia64/kernel/unaligned.c | 1 +
arch/ia64/mm/fault.c | 1 +
arch/m32r/kernel/traps.c | 1 +
arch/m32r/mm/fault.c | 1 +
arch/m68k/kernel/traps.c | 2 ++
arch/m68k/mm/fault.c | 3 +-
arch/metag/kernel/traps.c | 2 ++
arch/metag/mm/fault.c | 2 ++
arch/microblaze/kernel/exceptions.c | 1 +
arch/microblaze/mm/fault.c | 1 +
arch/mips/kernel/traps.c | 29 +++++++++++++------
arch/mips/mm/fault.c | 1 +
arch/mn10300/kernel/fpu.c | 1 +
arch/mn10300/kernel/traps.c | 1 +
arch/mn10300/mm/fault.c | 1 +
arch/mn10300/mm/misalignment.c | 2 ++
arch/nios2/kernel/traps.c | 1 +
arch/openrisc/kernel/traps.c | 5 +++-
arch/openrisc/mm/fault.c | 1 +
arch/parisc/kernel/ptrace.c | 1 +
arch/parisc/kernel/traps.c | 2 ++
arch/parisc/kernel/unaligned.c | 2 ++
arch/parisc/math-emu/driver.c | 1 +
arch/parisc/mm/fault.c | 1 +
arch/powerpc/kernel/process.c | 2 ++
arch/powerpc/kernel/traps.c | 4 +--
arch/powerpc/mm/fault.c | 1 +
arch/powerpc/platforms/cell/spufs/fault.c | 2 +-
arch/s390/kernel/traps.c | 3 ++
arch/s390/mm/fault.c | 2 ++
arch/score/kernel/traps.c | 1 +
arch/score/mm/fault.c | 1 +
arch/sh/kernel/hw_breakpoint.c | 1 +
arch/sh/kernel/traps_32.c | 4 +++
arch/sh/math-emu/math.c | 1 +
arch/sh/mm/fault.c | 1 +
arch/sparc/kernel/process_64.c | 1 +
arch/sparc/kernel/sys_sparc_32.c | 1 +
arch/sparc/kernel/sys_sparc_64.c | 1 +
arch/sparc/kernel/traps_32.c | 10 +++++++
arch/sparc/kernel/traps_64.c | 15 ++++++++++
arch/sparc/kernel/unaligned_32.c | 1 +
arch/sparc/mm/fault_32.c | 1 +
arch/sparc/mm/fault_64.c | 1 +
arch/tile/kernel/hardwall.c | 1 +
arch/tile/kernel/ptrace.c | 2 +-
arch/tile/kernel/single_step.c | 24 +++++++++-------
arch/tile/kernel/traps.c | 4 ++-
arch/tile/kernel/unaligned.c | 46 +++++++++++++++++--------------
arch/tile/mm/fault.c | 1 +
arch/um/kernel/ptrace.c | 2 +-
arch/um/kernel/trap.c | 4 ++-
arch/unicore32/kernel/fpu-ucf64.c | 3 +-
arch/unicore32/mm/fault.c | 3 ++
arch/x86/entry/vsyscall/vsyscall_64.c | 2 +-
arch/x86/kernel/ptrace.c | 2 +-
arch/x86/kernel/traps.c | 3 ++
arch/x86/kvm/mmu.c | 1 +
arch/x86/mm/fault.c | 1 +
arch/xtensa/kernel/ptrace.c | 1 +
arch/xtensa/kernel/traps.c | 1 +
arch/xtensa/mm/fault.c | 1 +
drivers/usb/core/devio.c | 4 +--
fs/fcntl.c | 1 +
include/linux/ptrace.h | 2 +-
include/linux/signal.h | 5 ++++
ipc/mqueue.c | 1 +
kernel/debug/kdb/kdb_main.c | 1 +
kernel/ptrace.c | 2 +-
kernel/seccomp.c | 2 +-
kernel/signal.c | 21 ++++++++++----
kernel/time/posix-timers.c | 2 +-
mm/memory-failure.c | 1 +
100 files changed, 272 insertions(+), 85 deletions(-)
Eric
On 07/18/2017 04:06 AM, Eric W. Biederman wrote:
> Setting si_code to __SI_FAULT results in a userspace seeing
> an si_code of 0. This is the same si_code as SI_USER. Posix
> and common sense requires that SI_USER not be a signal specific
> si_code. As such this use of 0 for the si_code is a pretty
> horribly broken ABI.
>
> Given that alpha is on it's last legs I don't know that it is worth
> fixing this, but it is worth documenting what is going on so that
> no one decides to copy this bad decision.
>
> This was introduced during the 2.5 development cycle so this
> mess has had a long time for people to be able to depend upon it.
>
> v2: Added FPE_FIXME for alpha as Helge Deller<[email protected]> pointed out
> with his alternate patch one of the cases is SIGFPE not SIGTRAP.
>
> Cc: Helge Deller<[email protected]>
> Cc: Richard Henderson<[email protected]>
> Cc: Ivan Kokshaysky<[email protected]>
> Cc: Matt Turner<[email protected]>
> Cc:[email protected]
> History Tree:https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
> Ref: 0a635c7a84cf ("Fill in siginfo_t.")
> Signed-off-by: "Eric W. Biederman"<[email protected]>
> ---
> arch/alpha/include/uapi/asm/siginfo.h | 14 ++++++++++++++
> arch/alpha/kernel/traps.c | 6 +++---
> 2 files changed, 17 insertions(+), 3 deletions(-)
Acked-by: Richard Henderson <[email protected]>
r~
On 07/18, Eric W. Biederman wrote:
>
> - BUG_ON((reason & __SI_MASK) != __SI_POLL);
> + BUG_ON((reason < POLL_IN) || (reason > NSIGPOLL));
^^^^^^^^^^^^^^^^^
looks obviously wrong? Say, POLL_IN is obviously > NSIGPOLL == 6.
Probably you meant
BUG_ON((reason < POLL_IN) || (reason - POLL_IN > NSIGPOLL)
?
but this contradicts with the next line:
> if (reason - POLL_IN >= NSIGPOLL)
> si.si_band = ~0L;
confused...
Oleg.
Oleg Nesterov <[email protected]> writes:
> On 07/18, Eric W. Biederman wrote:
>>
>> - BUG_ON((reason & __SI_MASK) != __SI_POLL);
>> + BUG_ON((reason < POLL_IN) || (reason > NSIGPOLL));
> ^^^^^^^^^^^^^^^^^
> looks obviously wrong? Say, POLL_IN is obviously > NSIGPOLL == 6.
Strictly speaking that code is wrong until the next patch
when I remove __SI_POLL. That is my mistake.
When the values are not their messed up internal kernel variants
the code works fine and makes sense.
#define POLL_IN 1 /* data input available */
#define POLL_OUT 2 /* output buffers available */
#define POLL_MSG 3 /* input message available */
#define POLL_ERR 4 /* i/o error */
#define POLL_PRI 5 /* high priority input available */
#define POLL_HUP 6 /* device disconnected */
#define NSIGPOLL 6
> Probably you meant
>
> BUG_ON((reason < POLL_IN) || (reason - POLL_IN > NSIGPOLL)
>
> ?
>
> but this contradicts with the next line:
>> if (reason - POLL_IN >= NSIGPOLL)
>> si.si_band = ~0L;
>
> confused...
I am mystified why we test for a condition that we have been bugging on
for ages.
Eric
[email protected] (Eric W. Biederman) writes:
> Linus Torvalds <[email protected]> writes:
>
>> On Tue, Jul 18, 2017 at 7:06 AM, Eric W. Biederman
>> <[email protected]> wrote:
>>> struct siginfo is a union and the kernel since 2.4 has been hiding a union
>>> tag in the high 16bits of si_code using the values:
>>> __SI_KILL
>>> __SI_TIMER
>>> __SI_POLL
>>> __SI_FAULT
>>> __SI_CHLD
>>> __SI_RT
>>> __SI_MESGQ
>>> __SI_SYS
>>>
>>> While this looks plausible on the surface, in practice this situation has
>>> not worked well.
>>
>> So on the whole I think we just need to do this, but the part I really
>> hate about this series is still this the siginfo_layout() part.
>>
>> I can well believe that it is needed for the compat case. siginfo is a
>> piece of crap crazy type, and re-ordering fields for compat is
>> something we are always going to have to do.
>>
>> But for the native case, the *only* reason we do not just copy the
>> siginfo as-is seems to be that it's just too big, due to other bad
>> design decisions in siginfo ("let's make sure it's big enough by
>> allocating 512 bytes for it).
>>
>> And afaik, absolutely nobody uses more than about 36 bytes of that
>> 512-byte _sifields union (and that one use is SIGILL with three
>> pointers and three integers and some padding.
>>
>> So why don't we just say "screw this idiotic layout crap, and just
>> unconditionally copy that much smaller maximum of bytes"?
>>
>> Leave that layout thing purely for compat handling.
>
> I completely agree.
So I just did some measurements to see what the performance impact is of
doing the simple and obvious thing of always copying the entire siginfo
around. There is a fair amount of variation in my timings but for
the whole change I see about a 20ns increase in time taken to send
a signal with siginfo from the current process to the current process.
AKA timing kill(getpid(),...).
I played with some clever changes such as limiting the copy to 48 bytes,
disabling the memset and the like but I could not get a strong enough
signal to say that any one change removed the extra or a clear part of
it 20ns.
Do we care about those 20ns for signal deliver? I suspect from my
previous numbers that if Andy can get signal delivery to use sysret
it will more than make up for the small increase in cost here.
Eric
On Sat, Jul 22, 2017 at 1:25 PM, Eric W. Biederman
<[email protected]> wrote:
> I played with some clever changes such as limiting the copy to 48 bytes,
> disabling the memset and the like but I could not get a strong enough
> signal to say that any one change removed the extra or a clear part of
> it 20ns.
What CPU did you use? Because the SMAP bit in particular matters.
The field-by-field copies are extremely slow on modern CPU's that
implement SMAP, unless you also use the special "unsafe_put_user()"
code (or the nasty old put_user_ex() code that some of the x86 signal
code uses).
So one of the advantages of just copy_to_user() ends up being visible
only on Broadwell+ (or whatever the SMAP cutoff is).
Linus
Linus Torvalds <[email protected]> writes:
> On Sat, Jul 22, 2017 at 1:25 PM, Eric W. Biederman
> <[email protected]> wrote:
>> I played with some clever changes such as limiting the copy to 48 bytes,
>> disabling the memset and the like but I could not get a strong enough
>> signal to say that any one change removed the extra or a clear part of
>> it 20ns.
>
> What CPU did you use? Because the SMAP bit in particular matters.
>
> The field-by-field copies are extremely slow on modern CPU's that
> implement SMAP, unless you also use the special "unsafe_put_user()"
> code (or the nasty old put_user_ex() code that some of the x86 signal
> code uses).
>
> So one of the advantages of just copy_to_user() ends up being visible
> only on Broadwell+ (or whatever the SMAP cutoff is).
Good point.
The cpu I was testing on was an AMD A10. I don't actually have a cpu
that supports SMAP handy.
If you would like I can post the minimal patches and benckmark so anyone
who is interested could reproduce this for themselves.
I suspect that if it is down to only 20ns without SMAP this will
definitely be a performance improvement in the presence of SMAP.
Eric
On Mon, Jul 24, 2017 at 10:43:34AM -0700, Linus Torvalds wrote:
> On Sat, Jul 22, 2017 at 1:25 PM, Eric W. Biederman
> <[email protected]> wrote:
> > I played with some clever changes such as limiting the copy to 48 bytes,
> > disabling the memset and the like but I could not get a strong enough
> > signal to say that any one change removed the extra or a clear part of
> > it 20ns.
>
> What CPU did you use? Because the SMAP bit in particular matters.
>
> The field-by-field copies are extremely slow on modern CPU's that
> implement SMAP, unless you also use the special "unsafe_put_user()"
> code (or the nasty old put_user_ex() code that some of the x86 signal
> code uses).
>
> So one of the advantages of just copy_to_user() ends up being visible
> only on Broadwell+ (or whatever the SMAP cutoff is).
Guys, could you take a look at vfs.git#work.siginfo? I'd been pretty
much buried lately (and probably will for several more weeks - long-distance
moves *suck*), so that thing got stalled, but it might be worth a look.
The code generated in copy_siginfo_to_user() in it looks reasonably good,
we don't copy more than we need and all copying to userland is done
by copy_to_user() - one call per call of copy_siginfo_to_user(), so
SMAP crap is not an issue.
The next thing I hope to do is converting compat side of that thing to
the same; that got stalled.
Al "Buried in boxes" Viro...
Al Viro <[email protected]> writes:
2> On Mon, Jul 24, 2017 at 10:43:34AM -0700, Linus Torvalds wrote:
>> On Sat, Jul 22, 2017 at 1:25 PM, Eric W. Biederman
>> <[email protected]> wrote:
>> > I played with some clever changes such as limiting the copy to 48 bytes,
>> > disabling the memset and the like but I could not get a strong enough
>> > signal to say that any one change removed the extra or a clear part of
>> > it 20ns.
>>
>> What CPU did you use? Because the SMAP bit in particular matters.
>>
>> The field-by-field copies are extremely slow on modern CPU's that
>> implement SMAP, unless you also use the special "unsafe_put_user()"
>> code (or the nasty old put_user_ex() code that some of the x86 signal
>> code uses).
>>
>> So one of the advantages of just copy_to_user() ends up being visible
>> only on Broadwell+ (or whatever the SMAP cutoff is).
>
> Guys, could you take a look at vfs.git#work.siginfo? I'd been pretty
> much buried lately (and probably will for several more weeks - long-distance
> moves *suck*), so that thing got stalled, but it might be worth a
> look.
There is some good stuff in there. If you don't mind I am going to
cherry pick out your unification of struct siginfo and struct compat_siginfo.
> The code generated in copy_siginfo_to_user() in it looks reasonably good,
> we don't copy more than we need and all copying to userland is done
> by copy_to_user() - one call per call of copy_siginfo_to_user(), so
> SMAP crap is not an issue.
There is actually a core problem with doing things that way. You rely
on having the siginfo union member stored in the high bits of si_code.
I have just fixed that in my tree and replaced using the high bits
with calling the function siginfo_layout.
It has been a significant problem storing the union member differently
in the kernel than in userspace. It has allowed for some pretty
horrendous gaffs in the archictecures changing the meaning of SI_USER
when specific signals are delivered over. It has also meant that ptrace
siginfo injection and tg_sigqueueinfo have been broken for some signals
almost since the interface was added.
Without any optimization and just changing the code to be copy_to_user
I am seeing a maybe 2% slowdown. Given that no one has seemed to care
overly for the performance of signal delivery I suspect an almost
unmeasurable slowdown is a reasonable tradeoff for simpler code.
> The next thing I hope to do is converting compat side of that thing to
> the same; that got stalled.
All of that said your precise copying code appears reasonable and quite
nice so I may adopt it on the compat side.
> Al "Buried in boxes" Viro...
Eric "Also Buried in boxes" Biederman
On Tue, 18 Jul 2017, Eric W. Biederman wrote:
> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
> index b68b4d0726d3..6c9cca9c5341 100644
> --- a/arch/mips/kernel/traps.c
> +++ b/arch/mips/kernel/traps.c
> @@ -735,7 +735,7 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
> else if (fcr31 & FPU_CSR_INE_X)
> si.si_code = FPE_FLTRES;
> else
> - si.si_code = __SI_FAULT;
> + si.si_code = FPE_FIXME;
This is an "impossible" state to reach unless your hardware is on fire.
One or more of the FCSR Cause bits will have been set (in `fcr31') or the
FPE exception would not have happened.
Of course there could be a simulator bug, or we could have breakage
somewhere causing `process_fpemu_return' to be called with SIGFPE and
inconsistent `fcr31'. So we need to handle it somehow.
So what would be the right value of `si_code' to use here for such an
unexpected exception condition? I think `BUG()' would be too big a
hammer here. Or wouldn't it?
Maciej
On Mon, Aug 7, 2017 at 9:18 AM, Maciej W. Rozycki <[email protected]> wrote:
>
> So what would be the right value of `si_code' to use here for such an
> unexpected exception condition? I think `BUG()' would be too big a
> hammer here. Or wouldn't it?
Hell no. NEVER EVER BUG().
The only case to use BUG() is if there is some core data structure
(say, kernel stack) that is so corrupted that you know you cannot
continue. That's the *only* valid use.
If this is a "this condition cannot happen" issue, then just remove
the damn conditional. It's pointless. Adding a BUG() to show "this
cannot happen" is not acceptable.
Linus
On Mon, Aug 07, 2017 at 10:41:39AM -0700, Linus Torvalds wrote:
> On Mon, Aug 7, 2017 at 9:18 AM, Maciej W. Rozycki <[email protected]> wrote:
> >
> > So what would be the right value of `si_code' to use here for such an
> > unexpected exception condition? I think `BUG()' would be too big a
> > hammer here. Or wouldn't it?
>
> Hell no. NEVER EVER BUG().
>
> The only case to use BUG() is if there is some core data structure
> (say, kernel stack) that is so corrupted that you know you cannot
> continue. That's the *only* valid use.
>
> If this is a "this condition cannot happen" issue, then just remove
> the damn conditional. It's pointless. Adding a BUG() to show "this
> cannot happen" is not acceptable.
I queued a patch to remove the code for 4.14.
Ralf
"Maciej W. Rozycki" <[email protected]> writes:
> On Tue, 18 Jul 2017, Eric W. Biederman wrote:
>
>> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
>> index b68b4d0726d3..6c9cca9c5341 100644
>> --- a/arch/mips/kernel/traps.c
>> +++ b/arch/mips/kernel/traps.c
>> @@ -735,7 +735,7 @@ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
>> else if (fcr31 & FPU_CSR_INE_X)
>> si.si_code = FPE_FLTRES;
>> else
>> - si.si_code = __SI_FAULT;
>> + si.si_code = FPE_FIXME;
>
> This is an "impossible" state to reach unless your hardware is on fire.
> One or more of the FCSR Cause bits will have been set (in `fcr31') or the
> FPE exception would not have happened.
>
> Of course there could be a simulator bug, or we could have breakage
> somewhere causing `process_fpemu_return' to be called with SIGFPE and
> inconsistent `fcr31'. So we need to handle it somehow.
>
> So what would be the right value of `si_code' to use here for such an
> unexpected exception condition? I think `BUG()' would be too big a
> hammer here. Or wouldn't it?
The possible solutions I can think of are:
WARN_ON_ONCE with a comment.
Add a new si_code to uapi/asm-generic/siginfo.h perhaps FPE_IMPOSSIBLE.
Like syscall numbers si_codes are cheap.
Call force_sig() instead of force_sig_info, using just a generic
si_code.
If this is truly impossible and the compiler doesn't complain just drop
the code.
Eric
On Tue, 8 Aug 2017, Eric W. Biederman wrote:
> > This is an "impossible" state to reach unless your hardware is on fire.
> > One or more of the FCSR Cause bits will have been set (in `fcr31') or the
> > FPE exception would not have happened.
> >
> > Of course there could be a simulator bug, or we could have breakage
> > somewhere causing `process_fpemu_return' to be called with SIGFPE and
> > inconsistent `fcr31'. So we need to handle it somehow.
> >
> > So what would be the right value of `si_code' to use here for such an
> > unexpected exception condition? I think `BUG()' would be too big a
> > hammer here. Or wouldn't it?
>
> The possible solutions I can think of are:
>
> WARN_ON_ONCE with a comment.
>
> Add a new si_code to uapi/asm-generic/siginfo.h perhaps FPE_IMPOSSIBLE.
> Like syscall numbers si_codes are cheap.
I think we ought to do both.
First, we have our own FP emulation code, which is changed from time to
time, that uses the same exit path that the hardware exception does. It
could happen that we miss something and return SIGFPE from the emulation
code without setting the cause bits appropriately. This would be our own
bug which might trigger exceedingly rarely and could then be caught by
WARN_ON_ONCE or otherwise stay there forever in the absence of that check.
Second, changing `si_code' from __SI_FAULT to 0 aka __SI_KILL will likely
interfere with `copy_siginfo_to_user32' in arch/mips/kernel/signal32.c,
making the userland lose the address of the faulting instruction in 32-bit
software run on 64-bit hardware only, making our API inconsistent. Using
a distinct `si_code' value such as FPE_IMPOSSIBLE (though we might choose
say FPE_FLTUNK for "FLoaTing point UNKnown" instead, for consistency; mind
that most `si_code' macros have the same number of characters within
groups associated with individual signals) for such odd traps is allowed
by SUS and will prevent the inconsistency from happening, very cheaply as
you say.
Maciej