(Resend because I mistyped the maintainer's email address the first time.)
The kernel's EFI stub locates and copies EFI ROM images into memory, which it allocates using the byte-granular EFI allocate_pool function. These memory ranges are then added to setup_data, and later to e820 (in e820__reserve_setup_data()). The e820 ranges are parsed to create nosave regions (in e820__register_nosave_regions()), but when non-page-aligned e820 regions are parsed, a nosave page is added at the beginning and end of each non-page-aligned region, which results in data not getting saved or restored during a hibernate/resume. This can result in random failures after a hibernate/resume.
Round up the allocation size to a whole number of pages, and use EFI allocate_pages to ensure that the EFI ROM copy regions are page-aligned.
On a system with six EFI ROM images, before the patch:
e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
...
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
After the patch:
e820: update [mem 0x64866000-0x6486efff] usable ==> usable
e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
...
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
Signed-off-by: Stuart Hayes <[email protected]>
---
--- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
+++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-01 12:11:33.120182236 -0400
@@ -235,7 +235,12 @@ __setup_efi_pci64(efi_pci_io_protocol_64
size = pci->romsize + sizeof(*rom);
- status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
+ /*
+ * Get whole pages because this will be added to e820.
+ */
+ size = PAGE_ALIGN(size);
+ status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
+ EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
if (status != EFI_SUCCESS) {
efi_printk(sys_table, "Failed to alloc mem for rom\n");
return status;
On Wed, 02 Aug, at 11:41:38AM, Stuart Hayes wrote:
> (Resend because I mistyped the maintainer's email address the first time.)
>
> The kernel's EFI stub locates and copies EFI ROM images into memory,
> which it allocates using the byte-granular EFI allocate_pool
> function. These memory ranges are then added to setup_data, and
> later to e820 (in e820__reserve_setup_data()). The e820 ranges are
> parsed to create nosave regions (in
> e820__register_nosave_regions()), but when non-page-aligned e820
> regions are parsed, a nosave page is added at the beginning and end
> of each non-page-aligned region, which results in data not getting
> saved or restored during a hibernate/resume. This can result in
> random failures after a hibernate/resume.
>
> Round up the allocation size to a whole number of pages, and use EFI
> allocate_pages to ensure that the EFI ROM copy regions are
> page-aligned.
>
> On a system with six EFI ROM images, before the patch:
>
> e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
> e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
> e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
> e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
> e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
> e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
> ...
> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
> PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
> PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
> PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
> PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
> PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
> PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
> PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
> PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
> PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
> PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
> PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>
> After the patch:
>
> e820: update [mem 0x64866000-0x6486efff] usable ==> usable
> e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
> e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
> e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
> e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
> e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
> ...
> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>
> Signed-off-by: Stuart Hayes <[email protected]>
> ---
>
> --- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
> +++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-01 12:11:33.120182236 -0400
> @@ -235,7 +235,12 @@ __setup_efi_pci64(efi_pci_io_protocol_64
>
> size = pci->romsize + sizeof(*rom);
>
> - status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
> + /*
> + * Get whole pages because this will be added to e820.
> + */
> + size = PAGE_ALIGN(size);
> + status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
> + EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
> if (status != EFI_SUCCESS) {
> efi_printk(sys_table, "Failed to alloc mem for rom\n");
> return status;
>
Nice catch. The comment could do with a little more information,
including the fact that it's the e820 nosave code that expects
page-aligned ROM regions.
Also, you'll need the same fix for __setup_efi_pci32().
* Matt Fleming <[email protected]> wrote:
> On Wed, 02 Aug, at 11:41:38AM, Stuart Hayes wrote:
> > (Resend because I mistyped the maintainer's email address the first time.)
> >
> > The kernel's EFI stub locates and copies EFI ROM images into memory,
> > which it allocates using the byte-granular EFI allocate_pool
> > function. These memory ranges are then added to setup_data, and
> > later to e820 (in e820__reserve_setup_data()). The e820 ranges are
> > parsed to create nosave regions (in
> > e820__register_nosave_regions()), but when non-page-aligned e820
> > regions are parsed, a nosave page is added at the beginning and end
> > of each non-page-aligned region, which results in data not getting
> > saved or restored during a hibernate/resume. This can result in
> > random failures after a hibernate/resume.
> >
> > Round up the allocation size to a whole number of pages, and use EFI
> > allocate_pages to ensure that the EFI ROM copy regions are
> > page-aligned.
> >
> > On a system with six EFI ROM images, before the patch:
> >
> > e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
> > e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
> > e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
> > e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
> > e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
> > e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
> > ...
> > PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> > PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> > PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
> > PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
> > PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
> > PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
> > PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
> > PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
> > PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
> > PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
> > PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
> > PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
> > PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
> > PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
> > PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
> >
> > After the patch:
> >
> > e820: update [mem 0x64866000-0x6486efff] usable ==> usable
> > e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
> > e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
> > e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
> > e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
> > e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
> > ...
> > PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> > PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> > PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
> >
> > Signed-off-by: Stuart Hayes <[email protected]>
> > ---
> >
> > --- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
> > +++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-01 12:11:33.120182236 -0400
> > @@ -235,7 +235,12 @@ __setup_efi_pci64(efi_pci_io_protocol_64
> >
> > size = pci->romsize + sizeof(*rom);
> >
> > - status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
> > + /*
> > + * Get whole pages because this will be added to e820.
> > + */
> > + size = PAGE_ALIGN(size);
> > + status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
> > + EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
> > if (status != EFI_SUCCESS) {
> > efi_printk(sys_table, "Failed to alloc mem for rom\n");
> > return status;
> >
>
> Nice catch. The comment could do with a little more information,
> including the fact that it's the e820 nosave code that expects
> page-aligned ROM regions.
>
> Also, you'll need the same fix for __setup_efi_pci32().
Just a quick ping: is this fix being worked on?
Thanks,
Ingo
The kernel's EFI stub locates and copies EFI ROM images into memory, which it allocates using the byte-granular EFI allocate_pool function. These memory ranges are then added to setup_data, and later to e820 (in e820__reserve_setup_data()). The e820 ranges are parsed to create nosave regions (in e820__register_nosave_regions()), but when non-page-aligned e820 regions are parsed, a nosave page is added at the beginning and end of each non-page-aligned region, which results in data not getting saved or restored during a hibernate/resume. This can result in random failures after a hibernate/resume.
Round up the allocation size to a whole number of pages, and use EFI allocate_pages to ensure that the EFI ROM copy regions are page-aligned.
On a system with six EFI ROM images, before the patch:
e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
...
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
After the patch:
e820: update [mem 0x64866000-0x6486efff] usable ==> usable
e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
...
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
Signed-off-by: Stuart Hayes <[email protected]>
---
Changes in V2:
Update the comments in the code.
Add same fix to __setup_efi_pci32()
--- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
+++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-07 13:00:15.165374388 -0400
@@ -127,7 +127,13 @@ __setup_efi_pci32(efi_pci_io_protocol_32
size = pci->romsize + sizeof(*rom);
- status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
+ /*
+ * Get whole pages because this will be added to e820, and
+ * e820__register_nosave_regions() expects page-aligned regions.
+ */
+ size = PAGE_ALIGN(size);
+ status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
+ EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
if (status != EFI_SUCCESS) {
efi_printk(sys_table, "Failed to alloc mem for rom\n");
return status;
@@ -235,7 +241,13 @@ __setup_efi_pci64(efi_pci_io_protocol_64
size = pci->romsize + sizeof(*rom);
- status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
+ /*
+ * Get whole pages because this will be added to e820, and
+ * e820__register_nosave_regions() expects page-aligned regions.
+ */
+ size = PAGE_ALIGN(size);
+ status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
+ EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
if (status != EFI_SUCCESS) {
efi_printk(sys_table, "Failed to alloc mem for rom\n");
return status;
On 8/10/2017 9:46 AM, Ingo Molnar wrote:
>
> * Matt Fleming <[email protected]> wrote:
>
>> On Wed, 02 Aug, at 11:41:38AM, Stuart Hayes wrote:
>>> (Resend because I mistyped the maintainer's email address the first time.)
>>>
>>> The kernel's EFI stub locates and copies EFI ROM images into memory,
>>> which it allocates using the byte-granular EFI allocate_pool
>>> function. These memory ranges are then added to setup_data, and
>>> later to e820 (in e820__reserve_setup_data()). The e820 ranges are
>>> parsed to create nosave regions (in
>>> e820__register_nosave_regions()), but when non-page-aligned e820
>>> regions are parsed, a nosave page is added at the beginning and end
>>> of each non-page-aligned region, which results in data not getting
>>> saved or restored during a hibernate/resume. This can result in
>>> random failures after a hibernate/resume.
>>>
>>> Round up the allocation size to a whole number of pages, and use EFI
>>> allocate_pages to ensure that the EFI ROM copy regions are
>>> page-aligned.
>>>
>>> On a system with six EFI ROM images, before the patch:
>>>
>>> e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
>>> e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
>>> e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
>>> e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
>>> e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
>>> e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
>>> ...
>>> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>>> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>>> PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
>>> PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
>>> PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
>>> PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
>>> PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
>>> PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
>>> PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
>>> PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
>>> PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
>>> PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
>>> PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
>>> PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
>>> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>>>
>>> After the patch:
>>>
>>> e820: update [mem 0x64866000-0x6486efff] usable ==> usable
>>> e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
>>> e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
>>> e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
>>> e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
>>> e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
>>> ...
>>> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>>> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>>> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>>>
>>> Signed-off-by: Stuart Hayes <[email protected]>
>>> ---
>>>
>>> --- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
>>> +++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-01 12:11:33.120182236 -0400
>>> @@ -235,7 +235,12 @@ __setup_efi_pci64(efi_pci_io_protocol_64
>>>
>>> size = pci->romsize + sizeof(*rom);
>>>
>>> - status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
>>> + /*
>>> + * Get whole pages because this will be added to e820.
>>> + */
>>> + size = PAGE_ALIGN(size);
>>> + status = efi_call_early(allocate_pages, EFI_ALLOCATE_ANY_PAGES,
>>> + EFI_LOADER_DATA, (size >> PAGE_SHIFT), &rom);
>>> if (status != EFI_SUCCESS) {
>>> efi_printk(sys_table, "Failed to alloc mem for rom\n");
>>> return status;
>>>
>>
>> Nice catch. The comment could do with a little more information,
>> including the fact that it's the e820 nosave code that expects
>> page-aligned ROM regions.
>>
>> Also, you'll need the same fix for __setup_efi_pci32().
>
> Just a quick ping: is this fix being worked on?
>
> Thanks,
>
> Ingo
>
Yes... I sent a v2 patch earlier today. Sorry for the delay.
Thanks
Stuart
* Stuart Hayes <[email protected]> wrote:
> The kernel's EFI stub locates and copies EFI ROM images into memory, which it allocates using the byte-granular EFI allocate_pool function. These memory ranges are then added to setup_data, and later to e820 (in e820__reserve_setup_data()). The e820 ranges are parsed to create nosave regions (in e820__register_nosave_regions()), but when non-page-aligned e820 regions are parsed, a nosave page is added at the beginning and end of each non-page-aligned region, which results in data not getting saved or restored during a hibernate/resume. This can result in random failures after a hibernate/resume.
>
> Round up the allocation size to a whole number of pages, and use EFI allocate_pages to ensure that the EFI ROM copy regions are page-aligned.
>
> On a system with six EFI ROM images, before the patch:
>
> e820: update [mem 0x64866020-0x6486e05f] usable ==> usable
> e820: update [mem 0x6147a020-0x61499c5f] usable ==> usable
> e820: update [mem 0x60fff020-0x6105785f] usable ==> usable
> e820: update [mem 0x60fa6020-0x60ffe85f] usable ==> usable
> e820: update [mem 0x60f4d020-0x60fa585f] usable ==> usable
> e820: update [mem 0x60ef4020-0x60f4c85f] usable ==> usable
> ...
> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> PM: Registered nosave memory: [mem 0x60ef4000-0x60ef4fff]
> PM: Registered nosave memory: [mem 0x60f4c000-0x60f4cfff]
> PM: Registered nosave memory: [mem 0x60f4d000-0x60f4dfff]
> PM: Registered nosave memory: [mem 0x60fa5000-0x60fa5fff]
> PM: Registered nosave memory: [mem 0x60fa6000-0x60fa6fff]
> PM: Registered nosave memory: [mem 0x60ffe000-0x60ffefff]
> PM: Registered nosave memory: [mem 0x60fff000-0x60ffffff]
> PM: Registered nosave memory: [mem 0x61057000-0x61057fff]
> PM: Registered nosave memory: [mem 0x6147a000-0x6147afff]
> PM: Registered nosave memory: [mem 0x61499000-0x61499fff]
> PM: Registered nosave memory: [mem 0x64866000-0x64866fff]
> PM: Registered nosave memory: [mem 0x6486e000-0x6486efff]
> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>
> After the patch:
>
> e820: update [mem 0x64866000-0x6486efff] usable ==> usable
> e820: update [mem 0x6147a000-0x61499fff] usable ==> usable
> e820: update [mem 0x60fff000-0x61057fff] usable ==> usable
> e820: update [mem 0x60fa6000-0x60ffefff] usable ==> usable
> e820: update [mem 0x60f4d000-0x60fa5fff] usable ==> usable
> e820: update [mem 0x60ef4000-0x60f4cfff] usable ==> usable
> ...
> PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> PM: Registered nosave memory: [mem 0x6cf6e000-0x6f3ccfff]
>
> Signed-off-by: Stuart Hayes <[email protected]>
> ---
> Changes in V2:
> Update the comments in the code.
> Add same fix to __setup_efi_pci32()
>
> --- linux-4.13-rc2/arch/x86/boot/compressed/eboot.c.orig 2017-08-01 12:12:04.696049106 -0400
> +++ linux-4.13-rc2/arch/x86/boot/compressed/eboot.c 2017-08-07 13:00:15.165374388 -0400
> @@ -127,7 +127,13 @@ __setup_efi_pci32(efi_pci_io_protocol_32
>
> size = pci->romsize + sizeof(*rom);
>
> - status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
> + /*
> + * Get whole pages because this will be added to e820, and
> + * e820__register_nosave_regions() expects page-aligned regions.
BTW., could we please also do a separate robustness fix to
e820__register_nosave_regions(), which complains about regions that have bad
alignment, and fixes them up if possible?
That way if with just the robustness fix applied we'd get the warning on your
system - and hibernation should work - and with this second fix we'd get a silent
bootup and a working system.
Or something like that?
Thanks,
Ingo