Hi,
On Tue, 7 Nov 2017 18:46:18 -0600 Rob Herring wrote:
> On Mon, Oct 30, 2017 at 5:33 AM, Lee Jones <[email protected]> wrote:
> > On Fri, 27 Oct 2017, Rob Herring wrote:
> >
> >> On Thu, Oct 26, 2017 at 02:49:46PM +0200, Lothar Waßmann wrote:
> >> > When switching the backlight on, the LCD may need some time to adjust
> >> > to the configured PWM duty cycle. Add a configurable delay between
> >> > configuring the PWM and enabling the backlight regulator to account
> >> > for this.
> >> >
> >> > Signed-off-by: Lothar Waßmann <[email protected]>
> >> > ---
> >> > .../bindings/leds/backlight/pwm-backlight.txt | 4 ++++
> >> > drivers/video/backlight/pwm_bl.c | 22 +++++++++++++++++++---
> >> > 2 files changed, 23 insertions(+), 3 deletions(-)
> >> >
> >> > diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> >> > index 764db86..95594c3 100644
> >> > --- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> >> > +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt
> >> > @@ -17,6 +17,10 @@ Optional properties:
> >> > "pwms" property (see PWM binding[0])
> >> > - enable-gpios: contains a single GPIO specifier for the GPIO which enables
> >> > and disables the backlight (see GPIO binding[1])
> >> > + - turn-on-delay-ms: delay in milliseconds between configuring the PWM
> >> > + and switching PWM on. This may be required to eliminate
> >> > + flicker when switching the PWM on after it has been
> >> > + disabled.
> >>
> >> The subject talks about turning on the backlight regulator, but this
> >> only talks about the PWM.
> >
> > From my understanding "switching PWM on" == enabling the regulator.
> >
> > I don't see any disparity here. Or am I missing something?
>
> The delay is from (re-)enabling the PWM (turning it on) to switching
> backlight power on. That sounds like 2 different things to me.
>
The text should better read:
+ - turn-on-delay-ms: delay in milliseconds between configuring the PWM
+ and switching the backlight regulator on. This may be
+ required to eliminate flicker when switching the backlight
+ on after it had been disabled.
Lothar Waßmann
From 1583467721097641886@xxx Wed Nov 08 03:41:36 +0000 2017
X-GM-THRID: 1582324570180092127
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread