Refactor the Kconfig and Makefile handling for host/ep mode, since
the previous handling was a bit unorthodox and would have been a bit
bloated once more DWC based controllers added support for ep mode.
Signed-off-by: Niklas Cassel <[email protected]>
Acked-by: Kishon Vijay Abraham I <[email protected]>
---
drivers/pci/dwc/Kconfig | 45 ++++++++++++++++++++++-----------------------
drivers/pci/dwc/Makefile | 4 +---
2 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 113e09440f85..3954353e3e2e 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -15,39 +15,38 @@ config PCIE_DW_EP
select PCIE_DW
config PCI_DRA7XX
- bool "TI DRA7xx PCIe controller"
- depends on SOC_DRA7XX || COMPILE_TEST
- depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT
- depends on OF && HAS_IOMEM && TI_PIPE3
- help
- Enables support for the PCIe controller in the DRA7xx SoC. There
- are two instances of PCIe controller in DRA7xx. This controller can
- work either as EP or RC. In order to enable host-specific features
- PCI_DRA7XX_HOST must be selected and in order to enable device-
- specific features PCI_DRA7XX_EP must be selected. This uses
- the DesignWare core.
-
-if PCI_DRA7XX
+ bool
config PCI_DRA7XX_HOST
- bool "PCI DRA7xx Host Mode"
- depends on PCI
- depends on PCI_MSI_IRQ_DOMAIN
+ bool "TI DRA7xx PCIe controller Host Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
+ depends on PCI && PCI_MSI_IRQ_DOMAIN
+ depends on OF && HAS_IOMEM && TI_PIPE3
select PCIE_DW_HOST
+ select PCI_DRA7XX
default y
help
- Enables support for the PCIe controller in the DRA7xx SoC to work in
- host mode.
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ host mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
config PCI_DRA7XX_EP
- bool "PCI DRA7xx Endpoint Mode"
+ bool "TI DRA7xx PCIe controller Endpoint Mode"
+ depends on SOC_DRA7XX || COMPILE_TEST
depends on PCI_ENDPOINT
+ depends on OF && HAS_IOMEM && TI_PIPE3
select PCIE_DW_EP
+ select PCI_DRA7XX
help
- Enables support for the PCIe controller in the DRA7xx SoC to work in
- endpoint mode.
-
-endif
+ Enables support for the PCIe controller in the DRA7xx SoC to work in
+ endpoint mode. There are two instances of PCIe controller in DRA7xx.
+ This controller can work either as EP or RC. In order to enable
+ host-specific features PCI_DRA7XX_HOST must be selected and in order
+ to enable device-specific features PCI_DRA7XX_EP must be selected.
+ This uses the DesignWare core.
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index 41ba499c96ee..a9d8a6fb48e3 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -3,9 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
-ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),)
- obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
-endif
+obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
--
2.14.2
From 1585200901007173546@xxx Mon Nov 27 06:49:45 +0000 2017
X-GM-THRID: 1585200901007173546
X-Gmail-Labels: Inbox,Category Forums,HistoricalUnread