Hi Joey,
and thanks for your comments. Response inline:
On Wed 29 Nov 2017, 09:52, joeyli wrote:
> On Wed, Nov 29, 2017 at 08:49:13AM +0800, joeyli wrote:
> > Hi Andrea,
> >
> > On Fri, Nov 24, 2017 at 10:22:35AM +0000, Andrea Reale wrote:
> > > Resending the patch adding linux-acpi in CC, as suggested by Rafael.
> > > Everyone else: apologies for the noise.
> > >
> > > Commit 242831eb15a0 ("Memory hotplug / ACPI: Simplify memory removal")
> > > introduced an assumption whereas when control
> > > reaches remove_memory the corresponding memory has been already
> > > offlined. In that case, the acpi_memhotplug was making sure that
> > > the assumption held.
> > > This assumption, however, is not necessarily true if offlining
> > > and removal are not done by the same "controller" (for example,
> > > when first offlining via sysfs).
> > >
> > > Removing this assumption for the generic remove_memory code
> > > and moving it in the specific acpi_memhotplug code. This is
> > > a dependency for the software-aided arm64 offlining and removal
> > > process.
> > >
> > > Signed-off-by: Andrea Reale <[email protected]>
> > > Signed-off-by: Maciej Bielski <[email protected]>
> > > ---
> > > drivers/acpi/acpi_memhotplug.c | 2 +-
> > > include/linux/memory_hotplug.h | 9 ++++++---
> > > mm/memory_hotplug.c | 13 +++++++++----
> > > 3 files changed, 16 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
> > > index 6b0d3ef..b0126a0 100644
> > > --- a/drivers/acpi/acpi_memhotplug.c
> > > +++ b/drivers/acpi/acpi_memhotplug.c
> > > @@ -282,7 +282,7 @@ static void acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
> > > nid = memory_add_physaddr_to_nid(info->start_addr);
> > >
> > > acpi_unbind_memory_blocks(info);
> > > - remove_memory(nid, info->start_addr, info->length);
> > > + BUG_ON(remove_memory(nid, info->start_addr, info->length));
> > > list_del(&info->list);
> > > kfree(info);
> > > }
> > > diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> > > index 58e110a..1a9c7b2 100644
> > > --- a/include/linux/memory_hotplug.h
> > > +++ b/include/linux/memory_hotplug.h
> > > @@ -295,7 +295,7 @@ static inline bool movable_node_is_enabled(void)
> > > extern bool is_mem_section_removable(unsigned long pfn, unsigned long nr_pages);
> > > extern void try_offline_node(int nid);
> > > extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
> > > -extern void remove_memory(int nid, u64 start, u64 size);
> > > +extern int remove_memory(int nid, u64 start, u64 size);
> > >
> > > #else
> > > static inline bool is_mem_section_removable(unsigned long pfn,
> > > @@ -311,7 +311,10 @@ static inline int offline_pages(unsigned long start_pfn, unsigned long nr_pages)
> > > return -EINVAL;
> > > }
> > >
> > > -static inline void remove_memory(int nid, u64 start, u64 size) {}
> > > +static inline int remove_memory(int nid, u64 start, u64 size)
> > > +{
> > > + return -EINVAL;
> > > +}
> > > #endif /* CONFIG_MEMORY_HOTREMOVE */
> > >
> > > extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
> > > @@ -323,7 +326,7 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
> > > unsigned long nr_pages);
> > > extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
> > > extern bool is_memblock_offlined(struct memory_block *mem);
> > > -extern void remove_memory(int nid, u64 start, u64 size);
> > > +extern int remove_memory(int nid, u64 start, u64 size);
> > > extern int sparse_add_one_section(struct pglist_data *pgdat, unsigned long start_pfn);
> > > extern void sparse_remove_one_section(struct zone *zone, struct mem_section *ms,
> > > unsigned long map_offset);
> > > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > > index d4b5f29..d5f15af 100644
> > > --- a/mm/memory_hotplug.c
> > > +++ b/mm/memory_hotplug.c
> > > @@ -1892,7 +1892,7 @@ EXPORT_SYMBOL(try_offline_node);
> > > * and online/offline operations before this call, as required by
> > > * try_offline_node().
> > > */
> > > -void __ref remove_memory(int nid, u64 start, u64 size)
> > > +int __ref remove_memory(int nid, u64 start, u64 size)
> > > {
> > > int ret;
> > >
> > > @@ -1908,18 +1908,23 @@ void __ref remove_memory(int nid, u64 start, u64 size)
> > > ret = walk_memory_range(PFN_DOWN(start), PFN_UP(start + size - 1), NULL,
> > > check_memblock_offlined_cb);
> > > if (ret)
> > > - BUG();
> > > + goto end_remove;
> > > +
> > > + ret = arch_remove_memory(start, size);
>
> Should not include arch_remove_memory() to BUG().
arch_remove_memory might also fail in some cases. In the arm64
implementation of this patchset, for example, it might fail in the
(very rare) case when we would have to split a P[UM]D mapped section for
removal (and we do not support that - see email thread here:
https://lkml.org/lkml/2017/11/23/456).
> > > +
> > > + if (ret)
> > > + goto end_remove;
> >
> > The original code triggers BUG() when any memblock is not offlined. Why
> > the new logic includes the result of arch_remove_memory()?
> >
> > But I agreed the we don't need BUG(). Returning a error is better.
>
> Actually, I lost one thing.
>
> The BUG() have caught a issue about the offline state doesn't sync between
> memory_block and device object. like:
> mem->dev.offline != (mem->state == MEM_OFFLINE)
>
> So, the BUG() is useful to capture state issue in memory subsystem. But, I
> understood your concern about the two steps offline/remove from userland.
>
> Maybe we should move the BUG() to somewhere but not just remove it. Or if
> we think that the BUG() is too intense, at least we should print out a error
> message, and ACPI should checks the return value from subsystem to
> interrupt memory-hotplug process.
In this patchset, BUG() is moved to acpi_memory_remove_memory(),
the caller of arch_remove_memory(). However, I agree with Michal, that
we should not BUG() here but rather halt the hotremove process and print
some errors.
Is there any state in ACPI that should be undone in case of hotremove
errors or we can just stop the process "halfway"?
> Thanks a lot!
> Joey Lee
Thanks,
Andrea
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On Mon, Dec 4, 2017 at 12:28 PM, Andrea Reale <[email protected]> wrote:
> Hi Joey,
>
> and thanks for your comments. Response inline:
>
[cut]
>>
>> So, the BUG() is useful to capture state issue in memory subsystem. But, I
>> understood your concern about the two steps offline/remove from userland.
>>
>> Maybe we should move the BUG() to somewhere but not just remove it. Or if
>> we think that the BUG() is too intense, at least we should print out a error
>> message, and ACPI should checks the return value from subsystem to
>> interrupt memory-hotplug process.
>
> In this patchset, BUG() is moved to acpi_memory_remove_memory(),
> the caller of arch_remove_memory(). However, I agree with Michal, that
> we should not BUG() here but rather halt the hotremove process and print
> some errors.
> Is there any state in ACPI that should be undone in case of hotremove
> errors or we can just stop the process "halfway"?
I have to recall a couple of things before answering this question, so
that may take some time.
Thanks,
Rafael