2017-12-13 12:34:40

by Mylène Josserand

[permalink] [raw]
Subject: [PATCH 0/2] sunxi: Add Capture support for sun8i-a33

Hello everyone,

Here is a first series to add support for the capture for
Allwinner Sun8I-A33 SoC (sun8i-codec).
These patches have been tested on Sun8i-r16 parrot board and
the two microphones are working well.

Noticed that the DAPM route is not correct: "Right/Left Digital
ADC Mixer" widgets should be after the "Right ADC" (according to what I
understood from the datasheet). This is currently not the case but when
I tried to update it, I got an error about "failing to add routes".
I will investigate why in next weeks (and send a V2) but as it
can take time, I think it is better to send a V1 and got reviews
(because it is the first time I am implementing such features).

Thank you in advance,
Best regards,
Mylène

Mylène Josserand (2):
ASoC: sun8i-codec: Add ADC support for a33
ARM: dts: sun8i: Add ADC routing

arch/arm/boot/dts/sun8i-a33.dtsi | 10 ++++-
sound/soc/sunxi/sun8i-codec.c | 82 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 89 insertions(+), 3 deletions(-)

--
2.11.0


2017-12-13 12:34:57

by Mylène Josserand

[permalink] [raw]
Subject: [PATCH 2/2] ARM: dts: sun8i: Add ADC routing

Add the ADC route between the analog and the digital parts
of sun8i A33. Configure the MIC1 to use MBIAS and MIC2 to use HBIAS.

Signed-off-by: Mylène Josserand <[email protected]>
---
arch/arm/boot/dts/sun8i-a33.dtsi | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 22660919bd08..1841eecd5993 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -191,7 +191,15 @@
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "AIF1 Slot 0 Left",
- "Right DAC", "AIF1 Slot 0 Right";
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Left ADC", "ADC",
+ "Right ADC", "ADC",
+ "Mic", "MBIAS",
+ "Headset Mic", "HBIAS",
+ "MIC1", "Mic",
+ "MIC2", "Headset Mic";
status = "disabled";

simple-audio-card,cpu {
--
2.11.0

2017-12-13 12:35:14

by Mylène Josserand

[permalink] [raw]
Subject: [PATCH 1/2] ASoC: sun8i-codec: Add ADC support for a33

Add ADC support for the sun8i-codec driver.

This driver uses microphones widgets and routes provided by the
analog part (sun8i-codec-analog).
Some digital configurations are needed by creating new ADC widgets
and routes.

Signed-off-by: Mylène Josserand <[email protected]>
---
sound/soc/sunxi/sun8i-codec.c | 82 +++++++++++++++++++++++++++++++++++++++++--
1 file changed, 80 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 3dd183be08a4..7a15df924316 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -37,9 +37,11 @@
#define SUN8I_SYSCLK_CTL_SYSCLK_SRC 0
#define SUN8I_MOD_CLK_ENA 0x010
#define SUN8I_MOD_CLK_ENA_AIF1 15
+#define SUN8I_MOD_CLK_ENA_ADC 3
#define SUN8I_MOD_CLK_ENA_DAC 2
#define SUN8I_MOD_RST_CTL 0x014
#define SUN8I_MOD_RST_CTL_AIF1 15
+#define SUN8I_MOD_RST_CTL_ADC 3
#define SUN8I_MOD_RST_CTL_DAC 2
#define SUN8I_SYS_SR_CTRL 0x018
#define SUN8I_SYS_SR_CTRL_AIF1_FS 12
@@ -54,9 +56,25 @@
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ 4
#define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_16 (1 << 4)
#define SUN8I_AIF1CLK_CTRL_AIF1_DATA_FMT 2
+#define SUN8I_AIF1_ADCDAT_CTRL 0x044
+#define SUN8I_AIF1_ADCDAT_CTRL_AIF1_DA0L_ENA 15
+#define SUN8I_AIF1_ADCDAT_CTRL_AIF1_DA0R_ENA 14
#define SUN8I_AIF1_DACDAT_CTRL 0x048
#define SUN8I_AIF1_DACDAT_CTRL_AIF1_DA0L_ENA 15
#define SUN8I_AIF1_DACDAT_CTRL_AIF1_DA0R_ENA 14
+#define SUN8I_AIF1_MXR_SRC 0x04c
+#define SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF1DA0L 15
+#define SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF2DACL 14
+#define SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_ADCL 13
+#define SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF2DACR 12
+#define SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF1DA0R 11
+#define SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF2DACR 10
+#define SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_ADCR 9
+#define SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF2DACL 8
+#define SUN8I_ADC_DIG_CTRL 0x100
+#define SUN8I_ADC_DIG_CTRL_ENDA 15
+#define SUN8I_ADC_DIG_CTRL_ADOUT_DTS 2
+#define SUN8I_ADC_DIG_CTRL_ADOUT_DLY 1
#define SUN8I_DAC_DIG_CTRL 0x120
#define SUN8I_DAC_DIG_CTRL_ENDA 15
#define SUN8I_DAC_MXR_SRC 0x130
@@ -338,10 +356,30 @@ static const struct snd_kcontrol_new sun8i_dac_mixer_controls[] = {
SUN8I_DAC_MXR_SRC_DACR_MXR_SRC_ADCR, 1, 0),
};

+static const struct snd_kcontrol_new sun8i_input_mixer_controls[] = {
+ SOC_DAPM_DOUBLE("AIF1 Slot 0 Digital ADC Capture Switch",
+ SUN8I_AIF1_MXR_SRC,
+ SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF1DA0L,
+ SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF1DA0R, 1, 0),
+ SOC_DAPM_DOUBLE("AIF2 Digital ADC Capture Switch", SUN8I_AIF1_MXR_SRC,
+ SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF2DACL,
+ SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF2DACR, 1, 0),
+ SOC_DAPM_DOUBLE("AIF1 Data Digital ADC Capture Switch",
+ SUN8I_AIF1_MXR_SRC,
+ SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_ADCL,
+ SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_ADCR, 1, 0),
+ SOC_DAPM_DOUBLE("AIF2 Inv Digital ADC Capture Switch",
+ SUN8I_AIF1_MXR_SRC,
+ SUN8I_AIF1_MXR_SRC_AD0L_MXL_SRC_AIF2DACR,
+ SUN8I_AIF1_MXR_SRC_AD0R_MXR_SRC_AIF2DACL, 1, 0),
+};
+
static const struct snd_soc_dapm_widget sun8i_codec_dapm_widgets[] = {
- /* Digital parts of the DACs */
+ /* Digital parts of the DACs and ADC */
SND_SOC_DAPM_SUPPLY("DAC", SUN8I_DAC_DIG_CTRL, SUN8I_DAC_DIG_CTRL_ENDA,
0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ADC", SUN8I_ADC_DIG_CTRL, SUN8I_ADC_DIG_CTRL_ENDA,
+ 0, NULL, 0),

/* Analog DAC AIF */
SND_SOC_DAPM_AIF_IN("AIF1 Slot 0 Left", "Playback", 0,
@@ -351,17 +389,31 @@ static const struct snd_soc_dapm_widget sun8i_codec_dapm_widgets[] = {
SUN8I_AIF1_DACDAT_CTRL,
SUN8I_AIF1_DACDAT_CTRL_AIF1_DA0R_ENA, 0),

- /* DAC Mixers */
+ /* Analog ADC AIF */
+ SND_SOC_DAPM_AIF_IN("AIF1 Slot 0 Left ADC", "Capture", 0,
+ SUN8I_AIF1_ADCDAT_CTRL,
+ SUN8I_AIF1_ADCDAT_CTRL_AIF1_DA0L_ENA, 0),
+ SND_SOC_DAPM_AIF_IN("AIF1 Slot 0 Right ADC", "Capture", 0,
+ SUN8I_AIF1_ADCDAT_CTRL,
+ SUN8I_AIF1_ADCDAT_CTRL_AIF1_DA0R_ENA, 0),
+
+ /* DAC and ADC Mixers */
SOC_MIXER_ARRAY("Left Digital DAC Mixer", SND_SOC_NOPM, 0, 0,
sun8i_dac_mixer_controls),
SOC_MIXER_ARRAY("Right Digital DAC Mixer", SND_SOC_NOPM, 0, 0,
sun8i_dac_mixer_controls),
+ SOC_MIXER_ARRAY("Left Digital ADC Mixer", SND_SOC_NOPM, 0, 0,
+ sun8i_input_mixer_controls),
+ SOC_MIXER_ARRAY("Right Digital ADC Mixer", SND_SOC_NOPM, 0, 0,
+ sun8i_input_mixer_controls),

/* Clocks */
SND_SOC_DAPM_SUPPLY("MODCLK AFI1", SUN8I_MOD_CLK_ENA,
SUN8I_MOD_CLK_ENA_AIF1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("MODCLK DAC", SUN8I_MOD_CLK_ENA,
SUN8I_MOD_CLK_ENA_DAC, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MODCLK ADC", SUN8I_MOD_CLK_ENA,
+ SUN8I_MOD_CLK_ENA_ADC, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("AIF1", SUN8I_SYSCLK_CTL,
SUN8I_SYSCLK_CTL_AIF1CLK_ENA, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("SYSCLK", SUN8I_SYSCLK_CTL,
@@ -378,6 +430,12 @@ static const struct snd_soc_dapm_widget sun8i_codec_dapm_widgets[] = {
SUN8I_MOD_RST_CTL_AIF1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("RST DAC", SUN8I_MOD_RST_CTL,
SUN8I_MOD_RST_CTL_DAC, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("RST ADC", SUN8I_MOD_RST_CTL,
+ SUN8I_MOD_RST_CTL_ADC, 0, NULL, 0),
+
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+
};

static const struct snd_soc_dapm_route sun8i_codec_dapm_routes[] = {
@@ -387,11 +445,16 @@ static const struct snd_soc_dapm_route sun8i_codec_dapm_routes[] = {
{ "RST AIF1", NULL, "AIF1 PLL" },
{ "MODCLK AFI1", NULL, "RST AIF1" },
{ "DAC", NULL, "MODCLK AFI1" },
+ { "ADC", NULL, "MODCLK AFI1" },

{ "RST DAC", NULL, "SYSCLK" },
{ "MODCLK DAC", NULL, "RST DAC" },
{ "DAC", NULL, "MODCLK DAC" },

+ { "RST ADC", NULL, "SYSCLK" },
+ { "MODCLK ADC", NULL, "RST ADC" },
+ { "ADC", NULL, "MODCLK ADC" },
+
/* DAC Routes */
{ "AIF1 Slot 0 Right", NULL, "DAC" },
{ "AIF1 Slot 0 Left", NULL, "DAC" },
@@ -401,6 +464,12 @@ static const struct snd_soc_dapm_route sun8i_codec_dapm_routes[] = {
"AIF1 Slot 0 Left"},
{ "Right Digital DAC Mixer", "AIF1 Slot 0 Digital DAC Playback Switch",
"AIF1 Slot 0 Right"},
+
+ /* ADC routes */
+ { "Left Digital ADC Mixer", "AIF1 Data Digital ADC Capture Switch",
+ "AIF1 Slot 0 Left ADC" },
+ { "Right Digital ADC Mixer", "AIF1 Data Digital ADC Capture Switch",
+ "AIF1 Slot 0 Right ADC" },
};

static const struct snd_soc_dai_ops sun8i_codec_dai_ops = {
@@ -418,6 +487,15 @@ static struct snd_soc_dai_driver sun8i_codec_dai = {
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
},
+ /* capture capabilities */
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .sig_bits = 24,
+ },
/* pcm operations */
.ops = &sun8i_codec_dai_ops,
};
--
2.11.0

2017-12-14 03:09:18

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH 2/2] ARM: dts: sun8i: Add ADC routing

On Wed, Dec 13, 2017 at 8:34 PM, Mylène Josserand
<[email protected]> wrote:
> Add the ADC route between the analog and the digital parts
> of sun8i A33. Configure the MIC1 to use MBIAS and MIC2 to use HBIAS.
>
> Signed-off-by: Mylène Josserand <[email protected]>
> ---
> arch/arm/boot/dts/sun8i-a33.dtsi | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
> index 22660919bd08..1841eecd5993 100644
> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
> @@ -191,7 +191,15 @@
> simple-audio-card,aux-devs = <&codec_analog>;
> simple-audio-card,routing =
> "Left DAC", "AIF1 Slot 0 Left",
> - "Right DAC", "AIF1 Slot 0 Right";
> + "Right DAC", "AIF1 Slot 0 Right",
> + "AIF1 Slot 0 Left ADC", "Left ADC",
> + "AIF1 Slot 0 Right ADC", "Right ADC",
> + "Left ADC", "ADC",
> + "Right ADC", "ADC",



> + "Mic", "MBIAS",
> + "Headset Mic", "HBIAS",
> + "MIC1", "Mic",
> + "MIC2", "Headset Mic";

These entries are board level routing. They should be done in the
board dts files. Unfortunately device tree does not provide a way
to "append" entries to properties, which means one has to copy all
the preceding entries as well.

Also, you are not adding the "Mic" and "Headset Mic" widgets. A33
uses simple-card, which means these connection/board level widgets
must be added using simple-audio-card,widgets.

ChenYu

> status = "disabled";
>
> simple-audio-card,cpu {
> --
> 2.11.0
>