Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/c6x/boot/dts/dsk6455.dts | 2 +-
arch/c6x/boot/dts/tms320c6455.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/c6x/boot/dts/dsk6455.dts b/arch/c6x/boot/dts/dsk6455.dts
index 2b71f800618d..3012f44e9357 100644
--- a/arch/c6x/boot/dts/dsk6455.dts
+++ b/arch/c6x/boot/dts/dsk6455.dts
@@ -55,7 +55,7 @@
interrupts = < 69 >;
};
- clock-controller@029a0000 {
+ clock-controller@29a0000 {
clock-frequency = <50000000>;
};
};
diff --git a/arch/c6x/boot/dts/tms320c6455.dtsi b/arch/c6x/boot/dts/tms320c6455.dtsi
index 0b21cb30343b..b5c36fb351db 100644
--- a/arch/c6x/boot/dts/tms320c6455.dtsi
+++ b/arch/c6x/boot/dts/tms320c6455.dtsi
@@ -68,7 +68,7 @@
ti,dscr-dev-enable = <4>;
};
- clock-controller@029a0000 {
+ clock-controller@29a0000 {
compatible = "ti,c6455-pll", "ti,c64x+pll";
reg = <0x029a0000 0x200>;
ti,c64x+pll-bypass-delay = <1440>;
--
2.11.0