Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/metag/boot/dts/tz1090.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/metag/boot/dts/tz1090.dtsi b/arch/metag/boot/dts/tz1090.dtsi
index 24ea7d2e9138..a3a3be7796f1 100644
--- a/arch/metag/boot/dts/tz1090.dtsi
+++ b/arch/metag/boot/dts/tz1090.dtsi
@@ -28,7 +28,7 @@
#size-cells = <1>;
ranges;
- pdc: pdc@0x02006000 {
+ pdc: pdc@2006000 {
interrupt-controller;
#interrupt-cells = <2>;
@@ -44,19 +44,19 @@
<31 IRQ_TYPE_LEVEL_HIGH>; /* Perip 2 (WDT) */
};
- pinctrl: pinctrl@02005800 {
+ pinctrl: pinctrl@2005800 {
#gpio-range-cells = <3>;
compatible = "img,tz1090-pinctrl";
reg = <0x02005800 0xe4>;
};
- pdc_pinctrl: pinctrl@02006500 {
+ pdc_pinctrl: pinctrl@2006500 {
#gpio-range-cells = <3>;
compatible = "img,tz1090-pdc-pinctrl";
reg = <0x02006500 0x100>;
};
- gpios: gpios@02005800 {
+ gpios: gpios@2005800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "img,tz1090-gpio";
@@ -91,7 +91,7 @@
};
};
- pdc_gpios: gpios@02006500 {
+ pdc_gpios: gpios@2006500 {
gpio-controller;
#gpio-cells = <2>;
--
2.11.0