Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/arm/boot/dts/atlas6.dtsi | 2 +-
arch/arm/boot/dts/atlas7.dtsi | 24 ++++++++++++------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 29598667420b..b19d5a6368c9 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -293,7 +293,7 @@
#dma-cells = <1>;
};
- vip@b00C0000 {
+ vip@b00c0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
index 83449b33de6b..97a24248c988 100644
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ b/arch/arm/boot/dts/atlas7.dtsi
@@ -76,7 +76,7 @@
<0x10302000 0x0100>;
};
- pmu_regulator: pmu_regulator@10E30020 {
+ pmu_regulator: pmu_regulator@10e30020 {
compatible = "sirf,atlas7-pmu-ldo";
reg = <0x10E30020 0x4>;
ldo: ldo {
@@ -84,7 +84,7 @@
};
};
- atlas7_codec: atlas7_codec@10E30000 {
+ atlas7_codec: atlas7_codec@10e30000 {
#sound-dai-cells = <0>;
compatible = "sirf,atlas7-codec";
reg = <0x10E30000 0x400>;
@@ -92,7 +92,7 @@
ldo-supply = <&ldo>;
};
- atlas7_iacc: atlas7_iacc@10D01000 {
+ atlas7_iacc: atlas7_iacc@10d01000 {
#sound-dai-cells = <0>;
compatible = "sirf,atlas7-iacc";
reg = <0x10D01000 0x100>;
@@ -1170,7 +1170,7 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x13240000 0x13240000 0x00010000>;
- pmipc@0x13240000 {
+ pmipc@13240000 {
compatible = "sirf,atlas7-pmipc";
reg = <0x13240000 0x00010000>;
};
@@ -1265,7 +1265,7 @@
#dma-cells = <1>;
};
- gnssmfw@0x18100000 {
+ gnssmfw@18100000 {
compatible = "sirf,nocfw-gnssm";
reg = <0x18100000 0x3000>;
};
@@ -1374,7 +1374,7 @@
<0x13010000 0x13010000 0x1400>,
<0x13010800 0x13010800 0x100>,
<0x13011000 0x13011000 0x100>;
- gpum@0x13000000 {
+ gpum@13000000 {
compatible = "sirf,nocfw-gpum";
reg = <0x13000000 0x3000>;
};
@@ -1396,7 +1396,7 @@
#dma-cells = <1>;
#dma-channels = <1>;
};
- sdr@0x13010000 {
+ sdr@13010000 {
compatible = "sirf,atlas7-sdr";
reg = <0x13010000 0x1400>;
interrupts = <0 7 0>,
@@ -1432,7 +1432,7 @@
clocks = <&car 102>;
};
- mediam@170A0000 {
+ mediam@170a0000 {
compatible = "sirf,nocfw-mediam";
reg = <0x170A0000 0x3000>;
};
@@ -1740,7 +1740,7 @@
clocks = <&car 54>;
};
- audiom@10ED0000 {
+ audiom@10ed0000 {
compatible = "sirf,nocfw-audiom";
reg = <0x10ED0000 0x3000>;
interrupts = <0 102 0>;
@@ -1780,7 +1780,7 @@
interrupts = <0 105 0>;
};
- memory-controller@0x10800000 {
+ memory-controller@10800000 {
compatible = "sirf,atlas7-memc";
reg = <0x10800000 0x2000>;
};
@@ -1887,7 +1887,7 @@
};
};
- qspi: flash@188B0000 {
+ qspi: flash@188b0000 {
cell-index = <0>;
compatible = "sirf,atlas7-qspi-nor";
reg = <0x188B0000 0x10000>;
@@ -1896,7 +1896,7 @@
#size-cells = <0>;
};
- retain@0x188D0000 {
+ retain@188d0000 {
compatible = "sirf,atlas7-retain";
reg = <0x188D0000 0x1000>;
};
--
2.11.0