Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/arm/boot/dts/da850-lcdk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index eed89e659143..a1f4d6d5a569 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -293,12 +293,12 @@
label = "u-boot env";
reg = <0 0x020000>;
};
- partition@0x020000 {
+ partition@20000 {
/* The LCDK defaults to booting from this partition */
label = "u-boot";
reg = <0x020000 0x080000>;
};
- partition@0x0a0000 {
+ partition@a0000 {
label = "free space";
reg = <0x0a0000 0>;
};
--
2.11.0
On Friday 15 December 2017 06:16 PM, Mathieu Malaterre wrote:
> Improve the DTS files by removing all the leading "0x" and zeros to fix the
> following dtc warnings:
>
> Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
>
> and
>
> Warning (unit_address_format): Node /XXX unit name should not have leading 0s
>
> Converted using the following command:
>
> find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
>
> For simplicity, two sed expressions were used to solve each warnings separately.
>
> To make the regex expression more robust a few other issues were resolved,
> namely setting unit-address to lower case, and adding a whitespace before the
> the opening curly brace:
>
> https://elinux.org/Device_Tree_Linux#Linux_conventions
>
> This will solve as a side effect warning:
>
> Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
>
> This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
>
> Reported-by: David Daney <[email protected]>
> Suggested-by: Rob Herring <[email protected]>
> Signed-off-by: Mathieu Malaterre <[email protected]>
Applied to v4.16/fixes-non-critical with some headline adjustments.
The subject prefix we use for this file is "ARM: dts: da850-lcdk:". You
can check that with 'git log --oneline'
Also, you are not fixing bindings notation here, but the actual device
tree source itself. So:
"
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
"
Thanks for the patch!
Sekhar