Hi,
This is a first serie to enable the display engine frontend.
This hardware block is found in the first generation Display Engine from
Allwinner. Its role is to implement more advanced features that the
associated backend, even though the backend alone can be used (and was used
so far) for basic composition.
Among those features, we will find hardware scaling, that is supported in
this serie, colorspace conversions, or more exotic formats support such as
the one output by the VPU.
Let me know what you think,
Maxime
Changes from v2:
- Substracted PHYS_OFFSET to the buffer address
- Make sure we only probe and add to the component list on frontends that
are supported, and not simply the one enabled in the DTs
- Reset the device at probe, and deassert the line after the clocks are
enabled
- Fixed the format value used
- Used drm_fb_cma_get_gem_addr
- Added a define for the COEF_ACCESS_CTRL bit
- Fixed a wrong comment
- Kept the ordering of the engine ops
- Reapplied the NULL plane pointer patch that got squashed in v2 somehow
- s/backend/engine/ in the engine_ops documentation
Changes from v1:
- Fixed the unbind function to not disable the already disabled clocks,
and to remove ourself from the frontend list
- Changed the log level of the frontend disabled message
- Added blank lines where suggested by Neil
- Fixed an artifact that was happening when the plane using the frontend
was disabled. This was happening because the frontend was disabled
before the backend layer (that would be disabled at the next vblank).
This led to a significant rework of the patches, so I didn't apply all
the tags. I also had to take a few patches in.
- Added engine ops documentation
- Fixed a bug in our duplicate_state callback that wouldn't preserve the
frontend state
- Removed the hardcoded register values and used the real ones instead.
- Fixed some compilation errors reported by the 0-day bot.
Maxime Ripard (13):
drm/sun4i: backend: Move line stride setup to buffer setup function
drm/sun4i: backend: Document the engine operations
drm/sun4i: backend: Allow a NULL plane pointer to retrieve the format
drm/sun4i: backend: Add a custom plane state
drm/sun4i: engine: Add a custom crtc atomic_check
drm/sun4i: engine: Add a VBLANK quirk callback
drm/sun4i: engine: Create an atomic_begin callback
drm/sun4i: Add a driver for the display frontend
drm/sun4i: backend: Wire in the frontend
drm/sun4i: backend: Add a custom atomic_check for the frontend
drm/sun4i: backend: Use runtime_pm variant of atomic_commit_tail
drm/sun4i: backend: Make sure we don't have a commit pending
ARM: dts: sun8i: a33 Enable our display frontend
arch/arm/boot/dts/sun8i-a33.dtsi | 1 +-
drivers/gpu/drm/sun4i/Makefile | 3 +-
drivers/gpu/drm/sun4i/sun4i_backend.c | 183 ++++++++++-
drivers/gpu/drm/sun4i/sun4i_backend.h | 10 +-
drivers/gpu/drm/sun4i/sun4i_crtc.c | 21 +-
drivers/gpu/drm/sun4i/sun4i_drv.c | 27 +-
drivers/gpu/drm/sun4i/sun4i_drv.h | 1 +-
drivers/gpu/drm/sun4i/sun4i_framebuffer.c | 6 +-
drivers/gpu/drm/sun4i/sun4i_frontend.c | 384 +++++++++++++++++++++++-
drivers/gpu/drm/sun4i/sun4i_frontend.h | 99 ++++++-
drivers/gpu/drm/sun4i/sun4i_layer.c | 83 ++++-
drivers/gpu/drm/sun4i/sun4i_layer.h | 11 +-
drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 +-
drivers/gpu/drm/sun4i/sunxi_engine.h | 89 +++++-
14 files changed, 901 insertions(+), 21 deletions(-)
create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.c
create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.h
base-commit: f2e323798ce2553a10ddc720879553642e05e619
--
git-series 0.9.1
Now that we have everything in place, we can start enabling the frontend.
This is more difficult than one would assume since there can only be one
plane using the frontend per-backend.
We therefore need to make sure that the userspace will not try to setup
multiple planes using it, since that would be impossible. In order to
prevent that, we can create an atomic_check callback that will check that
only one plane will effectively make use of the frontend in a given
configuration, and will toggle the switch in that plane state so that the
proper setup function can do their role.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 65 ++++++++++++++++++++++++++++-
drivers/gpu/drm/sun4i/sun4i_backend.h | 2 +-
2 files changed, 67 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index 29e1ca7e01fe..4642f933765e 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -11,6 +11,7 @@
*/
#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
@@ -271,6 +272,69 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
return 0;
}
+static bool sun4i_backend_plane_uses_scaler(struct drm_plane_state *state)
+{
+ u16 src_h = state->src_h >> 16;
+ u16 src_w = state->src_w >> 16;
+
+ DRM_DEBUG_DRIVER("Input size %dx%d, output size %dx%d\n",
+ src_w, src_h, state->crtc_w, state->crtc_h);
+
+ if ((state->crtc_h != src_h) || (state->crtc_w != src_w))
+ return true;
+
+ return false;
+}
+
+static bool sun4i_backend_plane_uses_frontend(struct drm_plane_state *state)
+{
+ struct sun4i_layer *layer = plane_to_sun4i_layer(state->plane);
+ struct sun4i_backend *backend = layer->backend;
+
+ if (IS_ERR(backend->frontend))
+ return false;
+
+ return sun4i_backend_plane_uses_scaler(state);
+}
+
+static int sun4i_backend_atomic_check(struct sunxi_engine *engine,
+ struct drm_crtc_state *crtc_state)
+{
+ struct drm_atomic_state *state = crtc_state->state;
+ struct drm_device *drm = state->dev;
+ struct drm_plane *plane;
+ unsigned int num_frontend_planes = 0;
+
+ DRM_DEBUG_DRIVER("Starting checking our planes\n");
+
+ if (!crtc_state->planes_changed)
+ return 0;
+
+ drm_for_each_plane_mask(plane, drm, crtc_state->plane_mask) {
+ struct drm_plane_state *plane_state =
+ drm_atomic_get_plane_state(state, plane);
+ struct sun4i_layer_state *layer_state =
+ state_to_sun4i_layer_state(plane_state);
+
+ if (sun4i_backend_plane_uses_frontend(plane_state)) {
+ DRM_DEBUG_DRIVER("Using the frontend for plane %d\n",
+ plane->index);
+
+ layer_state->uses_frontend = true;
+ num_frontend_planes++;
+ } else {
+ layer_state->uses_frontend = false;
+ }
+ }
+
+ if (num_frontend_planes > SUN4I_BACKEND_NUM_FRONTEND_LAYERS) {
+ DRM_DEBUG_DRIVER("Too many planes going through the frontend, rejecting\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static void sun4i_backend_vblank_quirk(struct sunxi_engine *engine)
{
struct sun4i_backend *backend = engine_to_sun4i_backend(engine);
@@ -414,6 +478,7 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
}
static const struct sunxi_engine_ops sun4i_backend_engine_ops = {
+ .atomic_check = sun4i_backend_atomic_check,
.commit = sun4i_backend_commit,
.layers_init = sun4i_layers_init,
.apply_color_correction = sun4i_backend_apply_color_correction,
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
index 350a2dbde31a..b5edf2d50a24 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
@@ -144,6 +144,8 @@
#define SUN4I_BACKEND_HWCCOLORTAB_OFF 0x4c00
#define SUN4I_BACKEND_PIPE_OFF(p) (0x5000 + (0x400 * (p)))
+#define SUN4I_BACKEND_NUM_FRONTEND_LAYERS 1
+
struct sun4i_backend {
struct sunxi_engine engine;
struct sun4i_frontend *frontend;
--
git-series 0.9.1
The display frontend can be used to do hardware scaling, colorspaces
conversion or to implement the buffer format output by the Cedar VPU.
Since we're starting to have some support for it in the DRM driver, let's
enable its DT node.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
arch/arm/boot/dts/sun8i-a33.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 50eb84fa246a..a21f2ed07a52 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -289,7 +289,6 @@
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_BUS_DE_FE>;
- status = "disabled";
ports {
#address-cells = <1>;
--
git-series 0.9.1
During a hardware commit, the commit bit in the backend will only be
cleared if the TCON is enabled. Use the runtime_pm variant of the
atomic_commit_tail hook that makes sure that the CRTC, our TCON, is enabled
when we perform an atomic_commit.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_framebuffer.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
index 2992f0a6b349..a01a5b7d46e6 100644
--- a/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_framebuffer.c
@@ -10,6 +10,7 @@
* the License, or (at your option) any later version.
*/
+#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
@@ -32,6 +33,10 @@ static const struct drm_mode_config_funcs sun4i_de_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
};
+static struct drm_mode_config_helper_funcs sun4i_de_mode_config_helpers = {
+ .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
struct drm_fbdev_cma *sun4i_framebuffer_init(struct drm_device *drm)
{
drm_mode_config_reset(drm);
@@ -40,6 +45,7 @@ struct drm_fbdev_cma *sun4i_framebuffer_init(struct drm_device *drm)
drm->mode_config.max_height = 8192;
drm->mode_config.funcs = &sun4i_de_mode_config_funcs;
+ drm->mode_config.helper_private = &sun4i_de_mode_config_helpers;
return drm_fbdev_cma_init(drm, 32, drm->mode_config.num_connector);
}
--
git-series 0.9.1
Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.
The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.
Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 90 ++++++++++++++++++++++++++++-
drivers/gpu/drm/sun4i/sun4i_backend.h | 8 ++-
drivers/gpu/drm/sun4i/sun4i_crtc.c | 1 +-
drivers/gpu/drm/sun4i/sun4i_layer.c | 33 +++++++++-
drivers/gpu/drm/sun4i/sun4i_layer.h | 1 +-
5 files changed, 130 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index f971d3fb5ee4..29e1ca7e01fe 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -26,6 +26,7 @@
#include "sun4i_backend.h"
#include "sun4i_drv.h"
+#include "sun4i_frontend.h"
#include "sun4i_layer.h"
#include "sunxi_engine.h"
@@ -203,6 +204,30 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
return 0;
}
+int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
+ int layer, uint32_t fmt)
+{
+ u32 val;
+ int ret;
+
+ ret = sun4i_backend_drm_format_to_layer(NULL, fmt, &val);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Invalid format\n");
+ return ret;
+ }
+
+ regmap_update_bits(backend->engine.regs,
+ SUN4I_BACKEND_ATTCTL_REG0(layer),
+ SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN,
+ SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN);
+
+ regmap_update_bits(backend->engine.regs,
+ SUN4I_BACKEND_ATTCTL_REG1(layer),
+ SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val);
+
+ return 0;
+}
+
int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
int layer, struct drm_plane *plane)
{
@@ -246,6 +271,36 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
return 0;
}
+static void sun4i_backend_vblank_quirk(struct sunxi_engine *engine)
+{
+ struct sun4i_backend *backend = engine_to_sun4i_backend(engine);
+ struct sun4i_frontend *frontend = backend->frontend;
+
+ if (!frontend)
+ return;
+
+ /*
+ * In a teardown scenario with the frontend involved, we have
+ * to keep the frontend enabled until the next vblank, and
+ * only then disable it.
+ *
+ * This is due to the fact that the backend will not take into
+ * account the new configuration (with the plane that used to
+ * be fed by the frontend now disabled) until we write to the
+ * commit bit and the hardware fetches the new configuration
+ * during the next vblank.
+ *
+ * So we keep the frontend around in order to prevent any
+ * visual artifacts.
+ */
+ spin_lock(&backend->frontend_lock);
+ if (backend->frontend_teardown) {
+ sun4i_frontend_exit(frontend);
+ backend->frontend_teardown = false;
+ }
+ spin_unlock(&backend->frontend_lock);
+};
+
static int sun4i_backend_init_sat(struct device *dev) {
struct sun4i_backend *backend = dev_get_drvdata(dev);
int ret;
@@ -330,11 +385,40 @@ static int sun4i_backend_of_get_id(struct device_node *node)
return ret;
}
+static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
+ struct device_node *node)
+{
+ struct device_node *port, *ep, *remote;
+ struct sun4i_frontend *frontend;
+
+ port = of_graph_get_port_by_id(node, 0);
+ if (!port)
+ return ERR_PTR(-EINVAL);
+
+ for_each_available_child_of_node(port, ep) {
+ remote = of_graph_get_remote_port_parent(ep);
+ if (!remote)
+ continue;
+
+ /* does this node match any registered engines? */
+ list_for_each_entry(frontend, &drv->frontend_list, list) {
+ if (remote == frontend->node) {
+ of_node_put(remote);
+ of_node_put(port);
+ return frontend;
+ }
+ }
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
static const struct sunxi_engine_ops sun4i_backend_engine_ops = {
.commit = sun4i_backend_commit,
.layers_init = sun4i_layers_init,
.apply_color_correction = sun4i_backend_apply_color_correction,
.disable_color_correction = sun4i_backend_disable_color_correction,
+ .vblank_quirk = sun4i_backend_vblank_quirk,
};
static struct regmap_config sun4i_backend_regmap_config = {
@@ -360,6 +444,7 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
if (!backend)
return -ENOMEM;
dev_set_drvdata(dev, backend);
+ spin_lock_init(&backend->frontend_lock);
backend->engine.node = dev->of_node;
backend->engine.ops = &sun4i_backend_engine_ops;
@@ -367,6 +452,11 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
if (backend->engine.id < 0)
return backend->engine.id;
+ backend->frontend = sun4i_backend_find_frontend(drv, dev->of_node);
+ if (IS_ERR(backend->frontend)) {
+ dev_warn(dev, "Couldn't find matching frontend, frontend features disabled\n");
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regs = devm_ioremap_resource(dev, res);
if (IS_ERR(regs))
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
index ac3cc029f5cd..350a2dbde31a 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.h
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
@@ -72,6 +72,7 @@
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL(x) ((x) << 15)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK GENMASK(11, 10)
#define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(x) ((x) << 10)
+#define SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN BIT(1)
#define SUN4I_BACKEND_ATTCTL_REG1(l) (0x8a0 + (0x4 * (l)))
#define SUN4I_BACKEND_ATTCTL_REG1_LAY_HSCAFCT GENMASK(15, 14)
@@ -145,6 +146,7 @@
struct sun4i_backend {
struct sunxi_engine engine;
+ struct sun4i_frontend *frontend;
struct reset_control *reset;
@@ -154,6 +156,10 @@ struct sun4i_backend {
struct clk *sat_clk;
struct reset_control *sat_reset;
+
+ /* Protects against races in the frontend teardown */
+ spinlock_t frontend_lock;
+ bool frontend_teardown;
};
static inline struct sun4i_backend *
@@ -170,5 +176,7 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
int layer, struct drm_plane *plane);
int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
int layer, struct drm_plane *plane);
+int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
+ int layer, uint32_t in_fmt);
#endif /* _SUN4I_BACKEND_H_ */
diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c
index f549f2874353..3b2d11b675e8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_crtc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c
@@ -25,6 +25,7 @@
#include <video/videomode.h>
+#include "sun4i_backend.h"
#include "sun4i_crtc.h"
#include "sun4i_drv.h"
#include "sunxi_engine.h"
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
index b85a9a02d166..4652b25be0d2 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
@@ -15,6 +15,7 @@
#include <drm/drmP.h>
#include "sun4i_backend.h"
+#include "sun4i_frontend.h"
#include "sun4i_layer.h"
#include "sunxi_engine.h"
@@ -48,6 +49,7 @@ static void sun4i_backend_layer_reset(struct drm_plane *plane)
static struct drm_plane_state *
sun4i_backend_layer_duplicate_state(struct drm_plane *plane)
{
+ struct sun4i_layer_state *orig = state_to_sun4i_layer_state(plane->state);
struct sun4i_layer_state *copy;
copy = kzalloc(sizeof(*copy), GFP_KERNEL);
@@ -55,6 +57,7 @@ sun4i_backend_layer_duplicate_state(struct drm_plane *plane)
return NULL;
__drm_atomic_helper_plane_duplicate_state(plane, ©->state);
+ copy->uses_frontend = orig->uses_frontend;
return ©->state;
}
@@ -72,21 +75,45 @@ static void sun4i_backend_layer_destroy_state(struct drm_plane *plane,
static void sun4i_backend_layer_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
+ struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(old_state);
struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
struct sun4i_backend *backend = layer->backend;
sun4i_backend_layer_enable(backend, layer->id, false);
+
+ if (layer_state->uses_frontend) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&backend->frontend_lock, flags);
+ backend->frontend_teardown = true;
+ spin_unlock_irqrestore(&backend->frontend_lock, flags);
+ }
}
static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
+ struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(plane->state);
struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
struct sun4i_backend *backend = layer->backend;
+ struct sun4i_frontend *frontend = backend->frontend;
+
+ if (layer_state->uses_frontend) {
+ sun4i_frontend_init(frontend);
+ sun4i_frontend_update_coord(frontend, plane);
+ sun4i_frontend_update_buffer(frontend, plane);
+ sun4i_frontend_update_formats(frontend, plane,
+ DRM_FORMAT_ARGB8888);
+ sun4i_backend_update_layer_frontend(backend, layer->id,
+ DRM_FORMAT_ARGB8888);
+ sun4i_backend_update_layer_coord(backend, layer->id, plane);
+ sun4i_frontend_enable(frontend);
+ } else {
+ sun4i_backend_update_layer_coord(backend, layer->id, plane);
+ sun4i_backend_update_layer_formats(backend, layer->id, plane);
+ sun4i_backend_update_layer_buffer(backend, layer->id, plane);
+ }
- sun4i_backend_update_layer_coord(backend, layer->id, plane);
- sun4i_backend_update_layer_formats(backend, layer->id, plane);
- sun4i_backend_update_layer_buffer(backend, layer->id, plane);
sun4i_backend_layer_enable(backend, layer->id, true);
}
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.h b/drivers/gpu/drm/sun4i/sun4i_layer.h
index d2c19348d1b0..75b4868ba87c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.h
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.h
@@ -24,6 +24,7 @@ struct sun4i_layer {
struct sun4i_layer_state {
struct drm_plane_state state;
+ bool uses_frontend;
};
static inline struct sun4i_layer *
--
git-series 0.9.1
If we try to read the backend registers while it fetches the new values, we
end up with the value of some random register instead of the one we asked
for.
In order to prevent that, let's make sure that the very first thing we do
during our atomic modesetting is to let the commit bit come to a rest.
We don't have to worry about anything else since the only time we will
trigger a new transaction is during the atomic_commit which comes much
later.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index 4642f933765e..a18c86a15748 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -297,6 +297,17 @@ static bool sun4i_backend_plane_uses_frontend(struct drm_plane_state *state)
return sun4i_backend_plane_uses_scaler(state);
}
+static void sun4i_backend_atomic_begin(struct sunxi_engine *engine,
+ struct drm_crtc_state *old_state)
+{
+ u32 val;
+
+ WARN_ON(regmap_read_poll_timeout(engine->regs,
+ SUN4I_BACKEND_REGBUFFCTL_REG,
+ val, !(val & SUN4I_BACKEND_REGBUFFCTL_LOADCTL),
+ 100, 50000));
+}
+
static int sun4i_backend_atomic_check(struct sunxi_engine *engine,
struct drm_crtc_state *crtc_state)
{
@@ -478,6 +489,7 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
}
static const struct sunxi_engine_ops sun4i_backend_engine_ops = {
+ .atomic_begin = sun4i_backend_atomic_begin,
.atomic_check = sun4i_backend_atomic_check,
.commit = sun4i_backend_commit,
.layers_init = sun4i_layers_init,
--
git-series 0.9.1
In some cases, the display engine needs to apply some quirks during the
VBLANK event. In the Display Engine 1.0 case for example, we can only
disable the frontend once the backend has been, which is at VBLANK.
Let's introduce a callback that can be implemented by the various engines.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_tcon.c | 4 ++++
drivers/gpu/drm/sun4i/sunxi_engine.h | 13 +++++++++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index e122f5b2a395..55f54b54293c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -368,6 +368,7 @@ static irqreturn_t sun4i_tcon_handler(int irq, void *private)
struct sun4i_tcon *tcon = private;
struct drm_device *drm = tcon->drm;
struct sun4i_crtc *scrtc = tcon->crtc;
+ struct sunxi_engine *engine = scrtc->engine;
unsigned int status;
regmap_read(tcon->regs, SUN4I_TCON_GINT0_REG, &status);
@@ -385,6 +386,9 @@ static irqreturn_t sun4i_tcon_handler(int irq, void *private)
SUN4I_TCON_GINT0_VBLANK_INT(1),
0);
+ if (engine->ops->vblank_quirk)
+ engine->ops->vblank_quirk(engine);
+
return IRQ_HANDLED;
}
diff --git a/drivers/gpu/drm/sun4i/sunxi_engine.h b/drivers/gpu/drm/sun4i/sunxi_engine.h
index b819d4f9f02f..54c029877531 100644
--- a/drivers/gpu/drm/sun4i/sunxi_engine.h
+++ b/drivers/gpu/drm/sun4i/sunxi_engine.h
@@ -85,6 +85,19 @@ struct sunxi_engine_ops {
* This function is optional.
*/
void (*disable_color_correction)(struct sunxi_engine *engine);
+
+ /**
+ * @vblank_quirk:
+ *
+ * This callback is used to implement engine-specific
+ * behaviour part of the VBLANK event. It is run with all the
+ * constraints of an interrupt (can't sleep, all local
+ * interrupts disabled) and therefore should be as fast as
+ * possible.
+ *
+ * This function is optional.
+ */
+ void (*vblank_quirk)(struct sunxi_engine *engine);
};
/**
--
git-series 0.9.1
We have to implement some display engine specific behaviours in
atomic_begin. Let's add a function for that.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_crtc.c | 6 +++++-
drivers/gpu/drm/sun4i/sunxi_engine.h | 13 +++++++++++++
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c
index 2a565325714f..f549f2874353 100644
--- a/drivers/gpu/drm/sun4i/sun4i_crtc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c
@@ -64,6 +64,7 @@ static void sun4i_crtc_atomic_begin(struct drm_crtc *crtc,
{
struct sun4i_crtc *scrtc = drm_crtc_to_sun4i_crtc(crtc);
struct drm_device *dev = crtc->dev;
+ struct sunxi_engine *engine = scrtc->engine;
unsigned long flags;
if (crtc->state->event) {
@@ -73,7 +74,10 @@ static void sun4i_crtc_atomic_begin(struct drm_crtc *crtc,
scrtc->event = crtc->state->event;
spin_unlock_irqrestore(&dev->event_lock, flags);
crtc->state->event = NULL;
- }
+ }
+
+ if (engine->ops->atomic_begin)
+ engine->ops->atomic_begin(engine, old_state);
}
static void sun4i_crtc_atomic_flush(struct drm_crtc *crtc,
diff --git a/drivers/gpu/drm/sun4i/sunxi_engine.h b/drivers/gpu/drm/sun4i/sunxi_engine.h
index 54c029877531..baa7a1f95300 100644
--- a/drivers/gpu/drm/sun4i/sunxi_engine.h
+++ b/drivers/gpu/drm/sun4i/sunxi_engine.h
@@ -23,6 +23,19 @@ struct sunxi_engine;
*/
struct sunxi_engine_ops {
/**
+ * @atomic_begin:
+ *
+ * This callback allows to prepare our engine for an atomic
+ * update. This is mirroring the
+ * &drm_crtc_helper_funcs.atomic_begin callback, so any
+ * documentation there applies.
+ *
+ * This function is optional.
+ */
+ void (*atomic_begin)(struct sunxi_engine *engine,
+ struct drm_crtc_state *old_state);
+
+ /**
* @atomic_check:
*
* This callback allows to validate plane-update related CRTC
--
git-series 0.9.1
The display frontend is an hardware block that can be used to implement
some more advanced features like hardware scaling or colorspace
conversions. It can also be used to implement the output format of the VPU.
Let's create a minimal driver for it that will only enable the hardware
scaling features.
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/Makefile | 3 +-
drivers/gpu/drm/sun4i/sun4i_drv.c | 27 +-
drivers/gpu/drm/sun4i/sun4i_drv.h | 1 +-
drivers/gpu/drm/sun4i/sun4i_frontend.c | 384 ++++++++++++++++++++++++++-
drivers/gpu/drm/sun4i/sun4i_frontend.h | 99 +++++++-
5 files changed, 509 insertions(+), 5 deletions(-)
create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.c
create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.h
diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
index 0c2f8c7facae..b660d82011f4 100644
--- a/drivers/gpu/drm/sun4i/Makefile
+++ b/drivers/gpu/drm/sun4i/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
sun4i-backend-y += sun4i_backend.o sun4i_layer.o
+sun4i-frontend-y += sun4i_frontend.o
sun4i-drm-y += sun4i_drv.o
sun4i-drm-y += sun4i_framebuffer.o
@@ -21,6 +22,6 @@ obj-$(CONFIG_DRM_SUN4I) += sun4i-tcon.o
obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o
obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o
-obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
+obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o sun4i-frontend.o
obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o
obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
index 75c76cdd82bc..42e68cf3a2e8 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -23,6 +23,7 @@
#include <drm/drm_of.h>
#include "sun4i_drv.h"
+#include "sun4i_frontend.h"
#include "sun4i_framebuffer.h"
#include "sun4i_tcon.h"
@@ -98,6 +99,7 @@ static int sun4i_drv_bind(struct device *dev)
goto free_drm;
}
drm->dev_private = drv;
+ INIT_LIST_HEAD(&drv->frontend_list);
INIT_LIST_HEAD(&drv->engine_list);
INIT_LIST_HEAD(&drv->tcon_list);
@@ -185,6 +187,14 @@ static bool sun4i_drv_node_is_frontend(struct device_node *node)
of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend");
}
+static bool sun4i_drv_node_is_supported_frontend(struct device_node *node)
+{
+ if (IS_ENABLED(CONFIG_DRM_SUN4I_BACKEND))
+ return !!of_match_node(sun4i_frontend_of_table, node);
+
+ return false;
+}
+
static bool sun4i_drv_node_is_tcon(struct device_node *node)
{
return of_device_is_compatible(node, "allwinner,sun4i-a10-tcon") ||
@@ -239,9 +249,11 @@ static int sun4i_drv_add_endpoints(struct device *dev,
int count = 0;
/*
- * We don't support the frontend for now, so we will never
- * have a device bound. Just skip over it, but we still want
- * the rest our pipeline to be added.
+ * The frontend has been disabled in some of our old device
+ * trees. If we find a node that is the frontend and is
+ * disabled, we should just follow through and parse its
+ * child, but without adding it to the component list.
+ * Otherwise, we obviously want to add it to the list.
*/
if (!sun4i_drv_node_is_frontend(node) &&
!of_device_is_available(node))
@@ -254,7 +266,14 @@ static int sun4i_drv_add_endpoints(struct device *dev,
if (sun4i_drv_node_is_connector(node))
return 0;
- if (!sun4i_drv_node_is_frontend(node)) {
+ /*
+ * If the device is either just a regular device, or an
+ * enabled frontend supported by the driver, we add it to our
+ * component list.
+ */
+ if (!sun4i_drv_node_is_frontend(node) ||
+ (sun4i_drv_node_is_supported_frontend(node) &&
+ of_device_is_available(node))) {
/* Add current component */
DRM_DEBUG_DRIVER("Adding component %pOF\n", node);
drm_of_component_match_add(dev, match, compare_of, node);
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.h b/drivers/gpu/drm/sun4i/sun4i_drv.h
index a960c89270cc..9c26a345f85c 100644
--- a/drivers/gpu/drm/sun4i/sun4i_drv.h
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.h
@@ -19,6 +19,7 @@
struct sun4i_drv {
struct list_head engine_list;
+ struct list_head frontend_list;
struct list_head tcon_list;
struct drm_fbdev_cma *fbdev;
diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
new file mode 100644
index 000000000000..c19238cec1b7
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Free Electrons
+ * Maxime Ripard <[email protected]>
+ */
+#include <drm/drmP.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "sun4i_drv.h"
+#include "sun4i_frontend.h"
+
+static const u32 sun4i_frontend_vert_coef[32] = {
+ 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd,
+ 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb,
+ 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb,
+ 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc,
+ 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd,
+ 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff,
+ 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff,
+ 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100,
+};
+
+static const u32 sun4i_frontend_horz_coef[64] = {
+ 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03,
+ 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06,
+ 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09,
+ 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f,
+ 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12,
+ 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18,
+ 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e,
+ 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23,
+ 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29,
+ 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e,
+ 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33,
+ 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37,
+ 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b,
+ 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e,
+ 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40,
+ 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
+};
+
+static void sun4i_frontend_scaler_init(struct sun4i_frontend *frontend)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i),
+ sun4i_frontend_horz_coef[2 * i]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF0_REG(i),
+ sun4i_frontend_horz_coef[2 * i]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF1_REG(i),
+ sun4i_frontend_horz_coef[2 * i + 1]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF1_REG(i),
+ sun4i_frontend_horz_coef[2 * i + 1]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTCOEF_REG(i),
+ sun4i_frontend_vert_coef[i]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTCOEF_REG(i),
+ sun4i_frontend_vert_coef[i]);
+ }
+
+ regmap_update_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+ SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL,
+ SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL);
+}
+
+int sun4i_frontend_init(struct sun4i_frontend *frontend)
+{
+ return pm_runtime_get_sync(frontend->dev);
+}
+EXPORT_SYMBOL(sun4i_frontend_init);
+
+void sun4i_frontend_exit(struct sun4i_frontend *frontend)
+{
+ pm_runtime_put(frontend->dev);
+}
+EXPORT_SYMBOL(sun4i_frontend_exit);
+
+void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
+ struct drm_plane *plane)
+{
+ struct drm_plane_state *state = plane->state;
+ struct drm_framebuffer *fb = state->fb;
+ dma_addr_t paddr;
+
+ /* Set the line width */
+ DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb->pitches[0]);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
+ fb->pitches[0]);
+
+ /* Set the physical address of the buffer in memory */
+ paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
+ paddr -= PHYS_OFFSET;
+ DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
+}
+EXPORT_SYMBOL(sun4i_frontend_update_buffer);
+
+static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
+{
+ switch (fmt) {
+ case DRM_FORMAT_ARGB8888:
+ *val = 5;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
+{
+ switch (fmt) {
+ case DRM_FORMAT_XRGB8888:
+ case DRM_FORMAT_ARGB8888:
+ *val = 2;
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
+ struct drm_plane *plane, uint32_t out_fmt)
+{
+ struct drm_plane_state *state = plane->state;
+ struct drm_framebuffer *fb = state->fb;
+ u32 out_fmt_val;
+ u32 in_fmt_val;
+ int ret;
+
+ ret = sun4i_frontend_drm_format_to_input_fmt(fb->format->format,
+ &in_fmt_val);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Invalid input format\n");
+ return ret;
+ }
+
+ ret = sun4i_frontend_drm_format_to_output_fmt(out_fmt, &out_fmt_val);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Invalid output format\n");
+ return ret;
+ }
+
+ /*
+ * I have no idea what this does exactly, but it seems to be
+ * related to the scaler FIR filter phase parameters.
+ */
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG, 0x400);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG, 0x400);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG, 0x400);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG, 0x400);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG, 0x400);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG, 0x400);
+
+ regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
+ SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(1) |
+ SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(in_fmt_val) |
+ SUN4I_FRONTEND_INPUT_FMT_PS(1));
+ regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
+ SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(out_fmt_val));
+
+ return 0;
+}
+EXPORT_SYMBOL(sun4i_frontend_update_formats);
+
+void sun4i_frontend_update_coord(struct sun4i_frontend *frontend,
+ struct drm_plane *plane)
+{
+ struct drm_plane_state *state = plane->state;
+
+ /* Set height and width */
+ DRM_DEBUG_DRIVER("Frontend size W: %u H: %u\n",
+ state->crtc_w, state->crtc_h);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_INSIZE_REG,
+ SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
+ state->src_w >> 16));
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_INSIZE_REG,
+ SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
+ state->src_w >> 16));
+
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_OUTSIZE_REG,
+ SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_OUTSIZE_REG,
+ SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
+
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZFACT_REG,
+ state->src_w / state->crtc_w);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZFACT_REG,
+ state->src_w / state->crtc_w);
+
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTFACT_REG,
+ state->src_h / state->crtc_h);
+ regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTFACT_REG,
+ state->src_h / state->crtc_h);
+
+ regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+ SUN4I_FRONTEND_FRM_CTRL_REG_RDY,
+ SUN4I_FRONTEND_FRM_CTRL_REG_RDY);
+}
+EXPORT_SYMBOL(sun4i_frontend_update_coord);
+
+int sun4i_frontend_enable(struct sun4i_frontend *frontend)
+{
+ regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
+ SUN4I_FRONTEND_FRM_CTRL_FRM_START,
+ SUN4I_FRONTEND_FRM_CTRL_FRM_START);
+
+ return 0;
+}
+EXPORT_SYMBOL(sun4i_frontend_enable);
+
+static struct regmap_config sun4i_frontend_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x0a14,
+};
+
+static int sun4i_frontend_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sun4i_frontend *frontend;
+ struct drm_device *drm = data;
+ struct sun4i_drv *drv = drm->dev_private;
+ struct resource *res;
+ void __iomem *regs;
+
+ frontend = devm_kzalloc(dev, sizeof(*frontend), GFP_KERNEL);
+ if (!frontend)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, frontend);
+ frontend->dev = dev;
+ frontend->node = dev->of_node;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ frontend->regs = devm_regmap_init_mmio(dev, regs,
+ &sun4i_frontend_regmap_config);
+ if (IS_ERR(frontend->regs)) {
+ dev_err(dev, "Couldn't create the frontend regmap\n");
+ return PTR_ERR(frontend->regs);
+ }
+
+ frontend->reset = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(frontend->reset)) {
+ dev_err(dev, "Couldn't get our reset line\n");
+ return PTR_ERR(frontend->reset);
+ }
+ reset_control_reset(frontend->reset);
+
+ frontend->bus_clk = devm_clk_get(dev, "ahb");
+ if (IS_ERR(frontend->bus_clk)) {
+ dev_err(dev, "Couldn't get our bus clock\n");
+ return PTR_ERR(frontend->bus_clk);
+ }
+
+ frontend->mod_clk = devm_clk_get(dev, "mod");
+ if (IS_ERR(frontend->mod_clk)) {
+ dev_err(dev, "Couldn't get our mod clock\n");
+ return PTR_ERR(frontend->mod_clk);
+ }
+
+ frontend->ram_clk = devm_clk_get(dev, "ram");
+ if (IS_ERR(frontend->ram_clk)) {
+ dev_err(dev, "Couldn't get our ram clock\n");
+ return PTR_ERR(frontend->ram_clk);
+ }
+
+ list_add_tail(&frontend->list, &drv->frontend_list);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static void sun4i_frontend_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+
+ list_del(&frontend->list);
+ pm_runtime_force_suspend(dev);
+}
+
+static const struct component_ops sun4i_frontend_ops = {
+ .bind = sun4i_frontend_bind,
+ .unbind = sun4i_frontend_unbind,
+};
+
+static int sun4i_frontend_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &sun4i_frontend_ops);
+}
+
+static int sun4i_frontend_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sun4i_frontend_ops);
+
+ return 0;
+}
+
+static int sun4i_frontend_runtime_resume(struct device *dev)
+{
+ struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+ int ret;
+
+ clk_set_rate(frontend->mod_clk, 300000000);
+
+ clk_prepare_enable(frontend->bus_clk);
+ clk_prepare_enable(frontend->mod_clk);
+ clk_prepare_enable(frontend->ram_clk);
+
+ ret = reset_control_deassert(frontend->reset);
+ if (ret) {
+ dev_err(dev, "Couldn't deassert our reset line\n");
+ return ret;
+ }
+
+ regmap_update_bits(frontend->regs, SUN4I_FRONTEND_EN_REG,
+ SUN4I_FRONTEND_EN_EN,
+ SUN4I_FRONTEND_EN_EN);
+
+ regmap_update_bits(frontend->regs, SUN4I_FRONTEND_BYPASS_REG,
+ SUN4I_FRONTEND_BYPASS_CSC_EN,
+ SUN4I_FRONTEND_BYPASS_CSC_EN);
+
+ sun4i_frontend_scaler_init(frontend);
+
+ return 0;
+}
+
+static int sun4i_frontend_runtime_suspend(struct device *dev)
+{
+ struct sun4i_frontend *frontend = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(frontend->ram_clk);
+ clk_disable_unprepare(frontend->mod_clk);
+ clk_disable_unprepare(frontend->bus_clk);
+
+ reset_control_assert(frontend->reset);
+
+ return 0;
+}
+
+static const struct dev_pm_ops sun4i_frontend_pm_ops = {
+ .runtime_resume = sun4i_frontend_runtime_resume,
+ .runtime_suspend = sun4i_frontend_runtime_suspend,
+};
+
+const struct of_device_id sun4i_frontend_of_table[] = {
+ { .compatible = "allwinner,sun8i-a33-display-frontend" },
+ { }
+};
+EXPORT_SYMBOL(sun4i_frontend_of_table);
+MODULE_DEVICE_TABLE(of, sun4i_frontend_of_table);
+
+static struct platform_driver sun4i_frontend_driver = {
+ .probe = sun4i_frontend_probe,
+ .remove = sun4i_frontend_remove,
+ .driver = {
+ .name = "sun4i-frontend",
+ .of_match_table = sun4i_frontend_of_table,
+ .pm = &sun4i_frontend_pm_ops,
+ },
+};
+module_platform_driver(sun4i_frontend_driver);
+
+MODULE_AUTHOR("Maxime Ripard <[email protected]>");
+MODULE_DESCRIPTION("Allwinner A10 Display Engine Frontend Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h
new file mode 100644
index 000000000000..02661ce81f3e
--- /dev/null
+++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Free Electrons
+ * Maxime Ripard <[email protected]>
+ */
+
+#ifndef _SUN4I_FRONTEND_H_
+#define _SUN4I_FRONTEND_H_
+
+#include <linux/list.h>
+
+#define SUN4I_FRONTEND_EN_REG 0x000
+#define SUN4I_FRONTEND_EN_EN BIT(0)
+
+#define SUN4I_FRONTEND_FRM_CTRL_REG 0x004
+#define SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL BIT(23)
+#define SUN4I_FRONTEND_FRM_CTRL_FRM_START BIT(16)
+#define SUN4I_FRONTEND_FRM_CTRL_COEF_RDY BIT(1)
+#define SUN4I_FRONTEND_FRM_CTRL_REG_RDY BIT(0)
+
+#define SUN4I_FRONTEND_BYPASS_REG 0x008
+#define SUN4I_FRONTEND_BYPASS_CSC_EN BIT(1)
+
+#define SUN4I_FRONTEND_BUF_ADDR0_REG 0x020
+
+#define SUN4I_FRONTEND_LINESTRD0_REG 0x040
+
+#define SUN4I_FRONTEND_INPUT_FMT_REG 0x04c
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(mod) ((mod) << 8)
+#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(fmt) ((fmt) << 4)
+#define SUN4I_FRONTEND_INPUT_FMT_PS(ps) (ps)
+
+#define SUN4I_FRONTEND_OUTPUT_FMT_REG 0x05c
+#define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(fmt) (fmt)
+
+#define SUN4I_FRONTEND_CH0_INSIZE_REG 0x100
+#define SUN4I_FRONTEND_INSIZE(h, w) ((((h) - 1) << 16) | (((w) - 1)))
+
+#define SUN4I_FRONTEND_CH0_OUTSIZE_REG 0x104
+#define SUN4I_FRONTEND_OUTSIZE(h, w) ((((h) - 1) << 16) | (((w) - 1)))
+
+#define SUN4I_FRONTEND_CH0_HORZFACT_REG 0x108
+#define SUN4I_FRONTEND_HORZFACT(i, f) (((i) << 16) | (f))
+
+#define SUN4I_FRONTEND_CH0_VERTFACT_REG 0x10c
+#define SUN4I_FRONTEND_VERTFACT(i, f) (((i) << 16) | (f))
+
+#define SUN4I_FRONTEND_CH0_HORZPHASE_REG 0x110
+#define SUN4I_FRONTEND_CH0_VERTPHASE0_REG 0x114
+#define SUN4I_FRONTEND_CH0_VERTPHASE1_REG 0x118
+
+#define SUN4I_FRONTEND_CH1_INSIZE_REG 0x200
+#define SUN4I_FRONTEND_CH1_OUTSIZE_REG 0x204
+#define SUN4I_FRONTEND_CH1_HORZFACT_REG 0x208
+#define SUN4I_FRONTEND_CH1_VERTFACT_REG 0x20c
+
+#define SUN4I_FRONTEND_CH1_HORZPHASE_REG 0x210
+#define SUN4I_FRONTEND_CH1_VERTPHASE0_REG 0x214
+#define SUN4I_FRONTEND_CH1_VERTPHASE1_REG 0x218
+
+#define SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i) (0x400 + i * 4)
+#define SUN4I_FRONTEND_CH0_HORZCOEF1_REG(i) (0x480 + i * 4)
+#define SUN4I_FRONTEND_CH0_VERTCOEF_REG(i) (0x500 + i * 4)
+#define SUN4I_FRONTEND_CH1_HORZCOEF0_REG(i) (0x600 + i * 4)
+#define SUN4I_FRONTEND_CH1_HORZCOEF1_REG(i) (0x680 + i * 4)
+#define SUN4I_FRONTEND_CH1_VERTCOEF_REG(i) (0x700 + i * 4)
+
+struct clk;
+struct device_node;
+struct drm_plane;
+struct regmap;
+struct reset_control;
+
+struct sun4i_frontend {
+ struct list_head list;
+ struct device *dev;
+ struct device_node *node;
+
+ struct clk *bus_clk;
+ struct clk *mod_clk;
+ struct clk *ram_clk;
+ struct regmap *regs;
+ struct reset_control *reset;
+};
+
+extern const struct of_device_id sun4i_frontend_of_table[];
+
+int sun4i_frontend_init(struct sun4i_frontend *frontend);
+void sun4i_frontend_exit(struct sun4i_frontend *frontend);
+int sun4i_frontend_enable(struct sun4i_frontend *frontend);
+
+void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
+ struct drm_plane *plane);
+void sun4i_frontend_update_coord(struct sun4i_frontend *frontend,
+ struct drm_plane *plane);
+int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
+ struct drm_plane *plane, uint32_t out_fmt);
+
+#endif /* _SUN4I_FRONTEND_H_ */
--
git-series 0.9.1
We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.
For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.
Let's allow our engines to provide an atomic_check callback to validate the
current configuration.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_crtc.c | 14 ++++++++++++++
drivers/gpu/drm/sun4i/sunxi_engine.h | 17 +++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c
index 5decae0069d0..2a565325714f 100644
--- a/drivers/gpu/drm/sun4i/sun4i_crtc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c
@@ -46,6 +46,19 @@ static struct drm_encoder *sun4i_crtc_get_encoder(struct drm_crtc *crtc)
return NULL;
}
+static int sun4i_crtc_atomic_check(struct drm_crtc *crtc,
+ struct drm_crtc_state *state)
+{
+ struct sun4i_crtc *scrtc = drm_crtc_to_sun4i_crtc(crtc);
+ struct sunxi_engine *engine = scrtc->engine;
+ int ret = 0;
+
+ if (engine && engine->ops && engine->ops->atomic_check)
+ ret = engine->ops->atomic_check(engine, state);
+
+ return ret;
+}
+
static void sun4i_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
@@ -125,6 +138,7 @@ static void sun4i_crtc_mode_set_nofb(struct drm_crtc *crtc)
}
static const struct drm_crtc_helper_funcs sun4i_crtc_helper_funcs = {
+ .atomic_check = sun4i_crtc_atomic_check,
.atomic_begin = sun4i_crtc_atomic_begin,
.atomic_flush = sun4i_crtc_atomic_flush,
.atomic_enable = sun4i_crtc_atomic_enable,
diff --git a/drivers/gpu/drm/sun4i/sunxi_engine.h b/drivers/gpu/drm/sun4i/sunxi_engine.h
index b374e074c7c3..b819d4f9f02f 100644
--- a/drivers/gpu/drm/sun4i/sunxi_engine.h
+++ b/drivers/gpu/drm/sun4i/sunxi_engine.h
@@ -23,6 +23,23 @@ struct sunxi_engine;
*/
struct sunxi_engine_ops {
/**
+ * @atomic_check:
+ *
+ * This callback allows to validate plane-update related CRTC
+ * constraints specific to engines. This is mirroring the
+ * &drm_crtc_helper_funcs.atomic_check callback, so any
+ * documentation there applies.
+ *
+ * This function is optional.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code.
+ */
+ int (*atomic_check)(struct sunxi_engine *engine,
+ struct drm_crtc_state *state);
+
+ /**
* @commit:
*
* This callback will trigger the hardware switch to commit
--
git-series 0.9.1
We will need to store some additional data in the future to the state.
Create a custom plane state that will embed those data, in order to store
the pipe or whether or not that plane should use the frontend.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_layer.c | 50 ++++++++++++++++++++++++++++--
drivers/gpu/drm/sun4i/sun4i_layer.h | 10 ++++++-
2 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
index 7bddf12548d3..b85a9a02d166 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.c
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
@@ -25,6 +25,50 @@ struct sun4i_plane_desc {
uint32_t nformats;
};
+static void sun4i_backend_layer_reset(struct drm_plane *plane)
+{
+ struct sun4i_layer_state *state;
+
+ if (plane->state) {
+ state = state_to_sun4i_layer_state(plane->state);
+
+ __drm_atomic_helper_plane_destroy_state(&state->state);
+
+ kfree(state);
+ plane->state = NULL;
+ }
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (state) {
+ plane->state = &state->state;
+ plane->state->plane = plane;
+ }
+}
+
+static struct drm_plane_state *
+sun4i_backend_layer_duplicate_state(struct drm_plane *plane)
+{
+ struct sun4i_layer_state *copy;
+
+ copy = kzalloc(sizeof(*copy), GFP_KERNEL);
+ if (!copy)
+ return NULL;
+
+ __drm_atomic_helper_plane_duplicate_state(plane, ©->state);
+
+ return ©->state;
+}
+
+static void sun4i_backend_layer_destroy_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ struct sun4i_layer_state *s_state = state_to_sun4i_layer_state(state);
+
+ __drm_atomic_helper_plane_destroy_state(state);
+
+ kfree(s_state);
+}
+
static void sun4i_backend_layer_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
@@ -52,11 +96,11 @@ static const struct drm_plane_helper_funcs sun4i_backend_layer_helper_funcs = {
};
static const struct drm_plane_funcs sun4i_backend_layer_funcs = {
- .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
- .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+ .atomic_destroy_state = sun4i_backend_layer_destroy_state,
+ .atomic_duplicate_state = sun4i_backend_layer_duplicate_state,
.destroy = drm_plane_cleanup,
.disable_plane = drm_atomic_helper_disable_plane,
- .reset = drm_atomic_helper_plane_reset,
+ .reset = sun4i_backend_layer_reset,
.update_plane = drm_atomic_helper_update_plane,
};
diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.h b/drivers/gpu/drm/sun4i/sun4i_layer.h
index 4e84f438b346..d2c19348d1b0 100644
--- a/drivers/gpu/drm/sun4i/sun4i_layer.h
+++ b/drivers/gpu/drm/sun4i/sun4i_layer.h
@@ -22,12 +22,22 @@ struct sun4i_layer {
int id;
};
+struct sun4i_layer_state {
+ struct drm_plane_state state;
+};
+
static inline struct sun4i_layer *
plane_to_sun4i_layer(struct drm_plane *plane)
{
return container_of(plane, struct sun4i_layer, plane);
}
+static inline struct sun4i_layer_state *
+state_to_sun4i_layer_state(struct drm_plane_state *state)
+{
+ return container_of(state, struct sun4i_layer_state, state);
+}
+
struct drm_plane **sun4i_layers_init(struct drm_device *drm,
struct sunxi_engine *engine);
--
git-series 0.9.1
Our operations were missing some documentation to explain what was expected
from them.
Let's make that clearer.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sunxi_engine.h | 46 +++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sunxi_engine.h b/drivers/gpu/drm/sun4i/sunxi_engine.h
index 4cb70ae65c79..b374e074c7c3 100644
--- a/drivers/gpu/drm/sun4i/sunxi_engine.h
+++ b/drivers/gpu/drm/sun4i/sunxi_engine.h
@@ -15,12 +15,58 @@ struct drm_device;
struct sunxi_engine;
+/**
+ * struct sunxi_engine_ops - helper operations for sunXi engines
+ *
+ * These hooks are used by the common part of the DRM driver to
+ * implement the proper behaviour.
+ */
struct sunxi_engine_ops {
+ /**
+ * @commit:
+ *
+ * This callback will trigger the hardware switch to commit
+ * the new configuration that has been setup during the next
+ * vblank period.
+ *
+ * This function is optional.
+ */
void (*commit)(struct sunxi_engine *engine);
+
+ /**
+ * @layers_init:
+ *
+ * This callback is used to allocate, initialize and register
+ * the layers supported by that engine.
+ *
+ * This function is mandatory.
+ *
+ * RETURNS:
+ *
+ * The array of struct drm_plane backing the layers, or an
+ * error pointer on failure.
+ */
struct drm_plane **(*layers_init)(struct drm_device *drm,
struct sunxi_engine *engine);
+ /**
+ * @apply_color_correction:
+ *
+ * This callback will enable the color correction in the
+ * engine. This is useful only for the composite output.
+ *
+ * This function is optional.
+ */
void (*apply_color_correction)(struct sunxi_engine *engine);
+
+ /**
+ * @disable_color_correction:
+ *
+ * This callback will stop the color correction in the
+ * engine. This is useful only for the composite output.
+ *
+ * This function is optional.
+ */
void (*disable_color_correction)(struct sunxi_engine *engine);
};
--
git-series 0.9.1
Setup the line stride in the buffer setup function, since it's tied to the
buffer itself, and is not needed when we do not set the buffer in the
backend.
This is for example the case when using the frontend and then routing its
output to the backend.
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index 847eecbe4d14..c99d1a7e815a 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -141,7 +141,6 @@ int sun4i_backend_update_layer_coord(struct sun4i_backend *backend,
int layer, struct drm_plane *plane)
{
struct drm_plane_state *state = plane->state;
- struct drm_framebuffer *fb = state->fb;
DRM_DEBUG_DRIVER("Updating layer %d\n", layer);
@@ -153,12 +152,6 @@ int sun4i_backend_update_layer_coord(struct sun4i_backend *backend,
state->crtc_h));
}
- /* Set the line width */
- DRM_DEBUG_DRIVER("Layer line width: %d bits\n", fb->pitches[0] * 8);
- regmap_write(backend->engine.regs,
- SUN4I_BACKEND_LAYLINEWIDTH_REG(layer),
- fb->pitches[0] * 8);
-
/* Set height and width */
DRM_DEBUG_DRIVER("Layer size W: %u H: %u\n",
state->crtc_w, state->crtc_h);
@@ -218,6 +211,13 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
u32 lo_paddr, hi_paddr;
dma_addr_t paddr;
+ /* Set the line width */
+ DRM_DEBUG_DRIVER("Layer line width: %d bits\n", fb->pitches[0] * 8);
+ regmap_write(backend->engine.regs,
+ SUN4I_BACKEND_LAYLINEWIDTH_REG(layer),
+ fb->pitches[0] * 8);
+
+
/* Get the start of the displayed memory */
paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
--
git-series 0.9.1
The function converting the DRM format to its equivalent in the backend
registers was assuming that we were having a plane.
However, we might want to use that function when setting up a plane using
the frontend, in which case we will not have a plane associated to the
backend's layer. Yet, we still need to setup the format to the one output
by the frontend.
Test for NULL plane pointers before referencing them, so that we can work
around it.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_backend.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index c99d1a7e815a..f971d3fb5ee4 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -93,7 +93,7 @@ void sun4i_backend_layer_enable(struct sun4i_backend *backend,
static int sun4i_backend_drm_format_to_layer(struct drm_plane *plane,
u32 format, u32 *mode)
{
- if ((plane->type == DRM_PLANE_TYPE_PRIMARY) &&
+ if (plane && (plane->type == DRM_PLANE_TYPE_PRIMARY) &&
(format == DRM_FORMAT_ARGB8888))
format = DRM_FORMAT_XRGB8888;
--
git-series 0.9.1
On Tue, Jan 9, 2018 at 6:09 PM, Maxime Ripard
<[email protected]> wrote:
> The display frontend is an hardware block that can be used to implement
> some more advanced features like hardware scaling or colorspace
> conversions. It can also be used to implement the output format of the VPU.
>
> Let's create a minimal driver for it that will only enable the hardware
> scaling features.
>
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
> drivers/gpu/drm/sun4i/Makefile | 3 +-
> drivers/gpu/drm/sun4i/sun4i_drv.c | 27 +-
> drivers/gpu/drm/sun4i/sun4i_drv.h | 1 +-
> drivers/gpu/drm/sun4i/sun4i_frontend.c | 384 ++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_frontend.h | 99 +++++++-
> 5 files changed, 509 insertions(+), 5 deletions(-)
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.c
> create mode 100644 drivers/gpu/drm/sun4i/sun4i_frontend.h
>
> diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile
> index 0c2f8c7facae..b660d82011f4 100644
> --- a/drivers/gpu/drm/sun4i/Makefile
> +++ b/drivers/gpu/drm/sun4i/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> sun4i-backend-y += sun4i_backend.o sun4i_layer.o
> +sun4i-frontend-y += sun4i_frontend.o
>
> sun4i-drm-y += sun4i_drv.o
> sun4i-drm-y += sun4i_framebuffer.o
> @@ -21,6 +22,6 @@ obj-$(CONFIG_DRM_SUN4I) += sun4i-tcon.o
> obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o
> obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o
>
> -obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o
> +obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o sun4i-frontend.o
> obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o
> obj-$(CONFIG_DRM_SUN8I_MIXER) += sun8i-mixer.o
> diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
> index 75c76cdd82bc..42e68cf3a2e8 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_drv.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
> @@ -23,6 +23,7 @@
> #include <drm/drm_of.h>
>
> #include "sun4i_drv.h"
> +#include "sun4i_frontend.h"
> #include "sun4i_framebuffer.h"
> #include "sun4i_tcon.h"
>
> @@ -98,6 +99,7 @@ static int sun4i_drv_bind(struct device *dev)
> goto free_drm;
> }
> drm->dev_private = drv;
> + INIT_LIST_HEAD(&drv->frontend_list);
> INIT_LIST_HEAD(&drv->engine_list);
> INIT_LIST_HEAD(&drv->tcon_list);
>
> @@ -185,6 +187,14 @@ static bool sun4i_drv_node_is_frontend(struct device_node *node)
> of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend");
> }
>
> +static bool sun4i_drv_node_is_supported_frontend(struct device_node *node)
> +{
> + if (IS_ENABLED(CONFIG_DRM_SUN4I_BACKEND))
> + return !!of_match_node(sun4i_frontend_of_table, node);
> +
> + return false;
> +}
> +
> static bool sun4i_drv_node_is_tcon(struct device_node *node)
> {
> return of_device_is_compatible(node, "allwinner,sun4i-a10-tcon") ||
> @@ -239,9 +249,11 @@ static int sun4i_drv_add_endpoints(struct device *dev,
> int count = 0;
>
> /*
> - * We don't support the frontend for now, so we will never
> - * have a device bound. Just skip over it, but we still want
> - * the rest our pipeline to be added.
> + * The frontend has been disabled in some of our old device
> + * trees. If we find a node that is the frontend and is
> + * disabled, we should just follow through and parse its
> + * child, but without adding it to the component list.
> + * Otherwise, we obviously want to add it to the list.
> */
> if (!sun4i_drv_node_is_frontend(node) &&
> !of_device_is_available(node))
> @@ -254,7 +266,14 @@ static int sun4i_drv_add_endpoints(struct device *dev,
> if (sun4i_drv_node_is_connector(node))
> return 0;
>
> - if (!sun4i_drv_node_is_frontend(node)) {
> + /*
> + * If the device is either just a regular device, or an
> + * enabled frontend supported by the driver, we add it to our
> + * component list.
> + */
> + if (!sun4i_drv_node_is_frontend(node) ||
> + (sun4i_drv_node_is_supported_frontend(node) &&
> + of_device_is_available(node))) {
Nit: sun4i_drv_node_is_supported_frontend should be a subset of
sun4i_drv_node_is_frontend, so of_device_is_available should always
be true at this point.
> /* Add current component */
> DRM_DEBUG_DRIVER("Adding component %pOF\n", node);
> drm_of_component_match_add(dev, match, compare_of, node);
> diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.h b/drivers/gpu/drm/sun4i/sun4i_drv.h
> index a960c89270cc..9c26a345f85c 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_drv.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_drv.h
> @@ -19,6 +19,7 @@
>
> struct sun4i_drv {
> struct list_head engine_list;
> + struct list_head frontend_list;
> struct list_head tcon_list;
>
> struct drm_fbdev_cma *fbdev;
> diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> new file mode 100644
> index 000000000000..c19238cec1b7
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c
> @@ -0,0 +1,384 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017 Free Electrons
> + * Maxime Ripard <[email protected]>
> + */
> +#include <drm/drmP.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +
> +#include "sun4i_drv.h"
> +#include "sun4i_frontend.h"
> +
> +static const u32 sun4i_frontend_vert_coef[32] = {
> + 0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd,
> + 0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb,
> + 0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb,
> + 0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc,
> + 0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd,
> + 0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff,
> + 0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff,
> + 0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100,
> +};
> +
> +static const u32 sun4i_frontend_horz_coef[64] = {
> + 0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03,
> + 0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06,
> + 0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09,
> + 0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f,
> + 0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12,
> + 0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18,
> + 0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e,
> + 0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23,
> + 0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29,
> + 0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e,
> + 0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33,
> + 0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37,
> + 0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b,
> + 0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e,
> + 0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40,
> + 0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
> +};
> +
> +static void sun4i_frontend_scaler_init(struct sun4i_frontend *frontend)
> +{
> + int i;
> +
> + for (i = 0; i < 32; i++) {
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i),
> + sun4i_frontend_horz_coef[2 * i]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF0_REG(i),
> + sun4i_frontend_horz_coef[2 * i]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZCOEF1_REG(i),
> + sun4i_frontend_horz_coef[2 * i + 1]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZCOEF1_REG(i),
> + sun4i_frontend_horz_coef[2 * i + 1]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTCOEF_REG(i),
> + sun4i_frontend_vert_coef[i]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTCOEF_REG(i),
> + sun4i_frontend_vert_coef[i]);
> + }
> +
> + regmap_update_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
> + SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL,
> + SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL);
> +}
> +
> +int sun4i_frontend_init(struct sun4i_frontend *frontend)
> +{
> + return pm_runtime_get_sync(frontend->dev);
> +}
> +EXPORT_SYMBOL(sun4i_frontend_init);
> +
> +void sun4i_frontend_exit(struct sun4i_frontend *frontend)
> +{
> + pm_runtime_put(frontend->dev);
> +}
> +EXPORT_SYMBOL(sun4i_frontend_exit);
> +
> +void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
> + struct drm_plane *plane)
> +{
> + struct drm_plane_state *state = plane->state;
> + struct drm_framebuffer *fb = state->fb;
> + dma_addr_t paddr;
> +
> + /* Set the line width */
> + DRM_DEBUG_DRIVER("Frontend stride: %d bytes\n", fb->pitches[0]);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_LINESTRD0_REG,
> + fb->pitches[0]);
> +
> + /* Set the physical address of the buffer in memory */
> + paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
> + paddr -= PHYS_OFFSET;
> + DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);
> +}
> +EXPORT_SYMBOL(sun4i_frontend_update_buffer);
> +
> +static int sun4i_frontend_drm_format_to_input_fmt(uint32_t fmt, u32 *val)
> +{
> + switch (fmt) {
> + case DRM_FORMAT_ARGB8888:
> + *val = 5;
> + return 0;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int sun4i_frontend_drm_format_to_output_fmt(uint32_t fmt, u32 *val)
> +{
> + switch (fmt) {
> + case DRM_FORMAT_XRGB8888:
> + case DRM_FORMAT_ARGB8888:
> + *val = 2;
> + return 0;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
> + struct drm_plane *plane, uint32_t out_fmt)
> +{
> + struct drm_plane_state *state = plane->state;
> + struct drm_framebuffer *fb = state->fb;
> + u32 out_fmt_val;
> + u32 in_fmt_val;
> + int ret;
> +
> + ret = sun4i_frontend_drm_format_to_input_fmt(fb->format->format,
> + &in_fmt_val);
> + if (ret) {
> + DRM_DEBUG_DRIVER("Invalid input format\n");
> + return ret;
> + }
> +
> + ret = sun4i_frontend_drm_format_to_output_fmt(out_fmt, &out_fmt_val);
> + if (ret) {
> + DRM_DEBUG_DRIVER("Invalid output format\n");
> + return ret;
> + }
> +
> + /*
> + * I have no idea what this does exactly, but it seems to be
> + * related to the scaler FIR filter phase parameters.
> + */
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZPHASE_REG, 0x400);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZPHASE_REG, 0x400);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE0_REG, 0x400);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE0_REG, 0x400);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTPHASE1_REG, 0x400);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTPHASE1_REG, 0x400);
> +
> + regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
> + SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(1) |
> + SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(in_fmt_val) |
> + SUN4I_FRONTEND_INPUT_FMT_PS(1));
> + regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
> + SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(out_fmt_val));
Seems that you also need to set the "ALPHA_EN" bit for ARGB.
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(sun4i_frontend_update_formats);
> +
> +void sun4i_frontend_update_coord(struct sun4i_frontend *frontend,
> + struct drm_plane *plane)
> +{
> + struct drm_plane_state *state = plane->state;
> +
> + /* Set height and width */
> + DRM_DEBUG_DRIVER("Frontend size W: %u H: %u\n",
> + state->crtc_w, state->crtc_h);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_INSIZE_REG,
> + SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
> + state->src_w >> 16));
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_INSIZE_REG,
> + SUN4I_FRONTEND_INSIZE(state->src_h >> 16,
> + state->src_w >> 16));
> +
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_OUTSIZE_REG,
> + SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_OUTSIZE_REG,
> + SUN4I_FRONTEND_OUTSIZE(state->crtc_h, state->crtc_w));
> +
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_HORZFACT_REG,
> + state->src_w / state->crtc_w);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_HORZFACT_REG,
> + state->src_w / state->crtc_w);
> +
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH0_VERTFACT_REG,
> + state->src_h / state->crtc_h);
> + regmap_write(frontend->regs, SUN4I_FRONTEND_CH1_VERTFACT_REG,
> + state->src_h / state->crtc_h);
> +
> + regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
> + SUN4I_FRONTEND_FRM_CTRL_REG_RDY,
> + SUN4I_FRONTEND_FRM_CTRL_REG_RDY);
> +}
> +EXPORT_SYMBOL(sun4i_frontend_update_coord);
> +
> +int sun4i_frontend_enable(struct sun4i_frontend *frontend)
> +{
> + regmap_write_bits(frontend->regs, SUN4I_FRONTEND_FRM_CTRL_REG,
> + SUN4I_FRONTEND_FRM_CTRL_FRM_START,
> + SUN4I_FRONTEND_FRM_CTRL_FRM_START);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(sun4i_frontend_enable);
> +
> +static struct regmap_config sun4i_frontend_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = 0x0a14,
> +};
> +
> +static int sun4i_frontend_bind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct sun4i_frontend *frontend;
> + struct drm_device *drm = data;
> + struct sun4i_drv *drv = drm->dev_private;
> + struct resource *res;
> + void __iomem *regs;
> +
> + frontend = devm_kzalloc(dev, sizeof(*frontend), GFP_KERNEL);
> + if (!frontend)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, frontend);
> + frontend->dev = dev;
> + frontend->node = dev->of_node;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + frontend->regs = devm_regmap_init_mmio(dev, regs,
> + &sun4i_frontend_regmap_config);
> + if (IS_ERR(frontend->regs)) {
> + dev_err(dev, "Couldn't create the frontend regmap\n");
> + return PTR_ERR(frontend->regs);
> + }
> +
> + frontend->reset = devm_reset_control_get(dev, NULL);
> + if (IS_ERR(frontend->reset)) {
> + dev_err(dev, "Couldn't get our reset line\n");
> + return PTR_ERR(frontend->reset);
> + }
> + reset_control_reset(frontend->reset);
reset_control_reset leaves the reset control deasserted. At this
point the clock might not be running, which might mean the internal
state is not completely wiped out. (Though this really depends on
the design of the internal logic.)
Maybe just assert it? It gets deasserted in the runtime PM callback
later. And just to be safe, I would move it close to the end of the
probe path, past all possible errors, so the hardware doesn't get
touched until everything is ready. Or don't touch it anywhere in
the probe path, and have the runtime PM resume function do a reset.
Regards
ChenYu
> +
> + frontend->bus_clk = devm_clk_get(dev, "ahb");
> + if (IS_ERR(frontend->bus_clk)) {
> + dev_err(dev, "Couldn't get our bus clock\n");
> + return PTR_ERR(frontend->bus_clk);
> + }
> +
> + frontend->mod_clk = devm_clk_get(dev, "mod");
> + if (IS_ERR(frontend->mod_clk)) {
> + dev_err(dev, "Couldn't get our mod clock\n");
> + return PTR_ERR(frontend->mod_clk);
> + }
> +
> + frontend->ram_clk = devm_clk_get(dev, "ram");
> + if (IS_ERR(frontend->ram_clk)) {
> + dev_err(dev, "Couldn't get our ram clock\n");
> + return PTR_ERR(frontend->ram_clk);
> + }
> +
> + list_add_tail(&frontend->list, &drv->frontend_list);
> + pm_runtime_enable(dev);
> +
> + return 0;
> +}
> +
> +static void sun4i_frontend_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + struct sun4i_frontend *frontend = dev_get_drvdata(dev);
> +
> + list_del(&frontend->list);
> + pm_runtime_force_suspend(dev);
> +}
> +
> +static const struct component_ops sun4i_frontend_ops = {
> + .bind = sun4i_frontend_bind,
> + .unbind = sun4i_frontend_unbind,
> +};
> +
> +static int sun4i_frontend_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &sun4i_frontend_ops);
> +}
> +
> +static int sun4i_frontend_remove(struct platform_device *pdev)
> +{
> + component_del(&pdev->dev, &sun4i_frontend_ops);
> +
> + return 0;
> +}
> +
> +static int sun4i_frontend_runtime_resume(struct device *dev)
> +{
> + struct sun4i_frontend *frontend = dev_get_drvdata(dev);
> + int ret;
> +
> + clk_set_rate(frontend->mod_clk, 300000000);
> +
> + clk_prepare_enable(frontend->bus_clk);
> + clk_prepare_enable(frontend->mod_clk);
> + clk_prepare_enable(frontend->ram_clk);
> +
> + ret = reset_control_deassert(frontend->reset);
> + if (ret) {
> + dev_err(dev, "Couldn't deassert our reset line\n");
> + return ret;
> + }
> +
> + regmap_update_bits(frontend->regs, SUN4I_FRONTEND_EN_REG,
> + SUN4I_FRONTEND_EN_EN,
> + SUN4I_FRONTEND_EN_EN);
> +
> + regmap_update_bits(frontend->regs, SUN4I_FRONTEND_BYPASS_REG,
> + SUN4I_FRONTEND_BYPASS_CSC_EN,
> + SUN4I_FRONTEND_BYPASS_CSC_EN);
> +
> + sun4i_frontend_scaler_init(frontend);
> +
> + return 0;
> +}
> +
> +static int sun4i_frontend_runtime_suspend(struct device *dev)
> +{
> + struct sun4i_frontend *frontend = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(frontend->ram_clk);
> + clk_disable_unprepare(frontend->mod_clk);
> + clk_disable_unprepare(frontend->bus_clk);
> +
> + reset_control_assert(frontend->reset);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops sun4i_frontend_pm_ops = {
> + .runtime_resume = sun4i_frontend_runtime_resume,
> + .runtime_suspend = sun4i_frontend_runtime_suspend,
> +};
> +
> +const struct of_device_id sun4i_frontend_of_table[] = {
> + { .compatible = "allwinner,sun8i-a33-display-frontend" },
> + { }
> +};
> +EXPORT_SYMBOL(sun4i_frontend_of_table);
> +MODULE_DEVICE_TABLE(of, sun4i_frontend_of_table);
> +
> +static struct platform_driver sun4i_frontend_driver = {
> + .probe = sun4i_frontend_probe,
> + .remove = sun4i_frontend_remove,
> + .driver = {
> + .name = "sun4i-frontend",
> + .of_match_table = sun4i_frontend_of_table,
> + .pm = &sun4i_frontend_pm_ops,
> + },
> +};
> +module_platform_driver(sun4i_frontend_driver);
> +
> +MODULE_AUTHOR("Maxime Ripard <[email protected]>");
> +MODULE_DESCRIPTION("Allwinner A10 Display Engine Frontend Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.h b/drivers/gpu/drm/sun4i/sun4i_frontend.h
> new file mode 100644
> index 000000000000..02661ce81f3e
> --- /dev/null
> +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.h
> @@ -0,0 +1,99 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017 Free Electrons
> + * Maxime Ripard <[email protected]>
> + */
> +
> +#ifndef _SUN4I_FRONTEND_H_
> +#define _SUN4I_FRONTEND_H_
> +
> +#include <linux/list.h>
> +
> +#define SUN4I_FRONTEND_EN_REG 0x000
> +#define SUN4I_FRONTEND_EN_EN BIT(0)
> +
> +#define SUN4I_FRONTEND_FRM_CTRL_REG 0x004
> +#define SUN4I_FRONTEND_FRM_CTRL_COEF_ACCESS_CTRL BIT(23)
> +#define SUN4I_FRONTEND_FRM_CTRL_FRM_START BIT(16)
> +#define SUN4I_FRONTEND_FRM_CTRL_COEF_RDY BIT(1)
> +#define SUN4I_FRONTEND_FRM_CTRL_REG_RDY BIT(0)
> +
> +#define SUN4I_FRONTEND_BYPASS_REG 0x008
> +#define SUN4I_FRONTEND_BYPASS_CSC_EN BIT(1)
> +
> +#define SUN4I_FRONTEND_BUF_ADDR0_REG 0x020
> +
> +#define SUN4I_FRONTEND_LINESTRD0_REG 0x040
> +
> +#define SUN4I_FRONTEND_INPUT_FMT_REG 0x04c
> +#define SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(mod) ((mod) << 8)
> +#define SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(fmt) ((fmt) << 4)
> +#define SUN4I_FRONTEND_INPUT_FMT_PS(ps) (ps)
> +
> +#define SUN4I_FRONTEND_OUTPUT_FMT_REG 0x05c
> +#define SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(fmt) (fmt)
> +
> +#define SUN4I_FRONTEND_CH0_INSIZE_REG 0x100
> +#define SUN4I_FRONTEND_INSIZE(h, w) ((((h) - 1) << 16) | (((w) - 1)))
> +
> +#define SUN4I_FRONTEND_CH0_OUTSIZE_REG 0x104
> +#define SUN4I_FRONTEND_OUTSIZE(h, w) ((((h) - 1) << 16) | (((w) - 1)))
> +
> +#define SUN4I_FRONTEND_CH0_HORZFACT_REG 0x108
> +#define SUN4I_FRONTEND_HORZFACT(i, f) (((i) << 16) | (f))
> +
> +#define SUN4I_FRONTEND_CH0_VERTFACT_REG 0x10c
> +#define SUN4I_FRONTEND_VERTFACT(i, f) (((i) << 16) | (f))
> +
> +#define SUN4I_FRONTEND_CH0_HORZPHASE_REG 0x110
> +#define SUN4I_FRONTEND_CH0_VERTPHASE0_REG 0x114
> +#define SUN4I_FRONTEND_CH0_VERTPHASE1_REG 0x118
> +
> +#define SUN4I_FRONTEND_CH1_INSIZE_REG 0x200
> +#define SUN4I_FRONTEND_CH1_OUTSIZE_REG 0x204
> +#define SUN4I_FRONTEND_CH1_HORZFACT_REG 0x208
> +#define SUN4I_FRONTEND_CH1_VERTFACT_REG 0x20c
> +
> +#define SUN4I_FRONTEND_CH1_HORZPHASE_REG 0x210
> +#define SUN4I_FRONTEND_CH1_VERTPHASE0_REG 0x214
> +#define SUN4I_FRONTEND_CH1_VERTPHASE1_REG 0x218
> +
> +#define SUN4I_FRONTEND_CH0_HORZCOEF0_REG(i) (0x400 + i * 4)
> +#define SUN4I_FRONTEND_CH0_HORZCOEF1_REG(i) (0x480 + i * 4)
> +#define SUN4I_FRONTEND_CH0_VERTCOEF_REG(i) (0x500 + i * 4)
> +#define SUN4I_FRONTEND_CH1_HORZCOEF0_REG(i) (0x600 + i * 4)
> +#define SUN4I_FRONTEND_CH1_HORZCOEF1_REG(i) (0x680 + i * 4)
> +#define SUN4I_FRONTEND_CH1_VERTCOEF_REG(i) (0x700 + i * 4)
> +
> +struct clk;
> +struct device_node;
> +struct drm_plane;
> +struct regmap;
> +struct reset_control;
> +
> +struct sun4i_frontend {
> + struct list_head list;
> + struct device *dev;
> + struct device_node *node;
> +
> + struct clk *bus_clk;
> + struct clk *mod_clk;
> + struct clk *ram_clk;
> + struct regmap *regs;
> + struct reset_control *reset;
> +};
> +
> +extern const struct of_device_id sun4i_frontend_of_table[];
> +
> +int sun4i_frontend_init(struct sun4i_frontend *frontend);
> +void sun4i_frontend_exit(struct sun4i_frontend *frontend);
> +int sun4i_frontend_enable(struct sun4i_frontend *frontend);
> +
> +void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,
> + struct drm_plane *plane);
> +void sun4i_frontend_update_coord(struct sun4i_frontend *frontend,
> + struct drm_plane *plane);
> +int sun4i_frontend_update_formats(struct sun4i_frontend *frontend,
> + struct drm_plane *plane, uint32_t out_fmt);
> +
> +#endif /* _SUN4I_FRONTEND_H_ */
> --
> git-series 0.9.1
On Tue, Jan 9, 2018 at 6:09 PM, Maxime Ripard
<[email protected]> wrote:
> Now that we have a driver, we can make use of it. This is done by
> adding a flag to our custom plane state that will trigger whether we should
> use the frontend on that particular plane or not.
>
> The rest is just plumbing to set up the backend to not perform the DMA but
> receive its data from the frontend.
>
> Note that we're still not making any use of the frontend itself, as no one
> is setting the flag yet.
>
> Signed-off-by: Maxime Ripard <[email protected]>
> ---
> drivers/gpu/drm/sun4i/sun4i_backend.c | 90 ++++++++++++++++++++++++++++-
> drivers/gpu/drm/sun4i/sun4i_backend.h | 8 ++-
> drivers/gpu/drm/sun4i/sun4i_crtc.c | 1 +-
> drivers/gpu/drm/sun4i/sun4i_layer.c | 33 +++++++++-
> drivers/gpu/drm/sun4i/sun4i_layer.h | 1 +-
> 5 files changed, 130 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
> index f971d3fb5ee4..29e1ca7e01fe 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
> @@ -26,6 +26,7 @@
>
> #include "sun4i_backend.h"
> #include "sun4i_drv.h"
> +#include "sun4i_frontend.h"
> #include "sun4i_layer.h"
> #include "sunxi_engine.h"
>
> @@ -203,6 +204,30 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
> return 0;
> }
>
> +int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
> + int layer, uint32_t fmt)
> +{
> + u32 val;
> + int ret;
> +
> + ret = sun4i_backend_drm_format_to_layer(NULL, fmt, &val);
> + if (ret) {
> + DRM_DEBUG_DRIVER("Invalid format\n");
> + return ret;
> + }
> +
> + regmap_update_bits(backend->engine.regs,
> + SUN4I_BACKEND_ATTCTL_REG0(layer),
> + SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN,
> + SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN);
> +
> + regmap_update_bits(backend->engine.regs,
> + SUN4I_BACKEND_ATTCTL_REG1(layer),
> + SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val);
> +
> + return 0;
> +}
> +
> int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane)
> {
> @@ -246,6 +271,36 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
> return 0;
> }
>
> +static void sun4i_backend_vblank_quirk(struct sunxi_engine *engine)
> +{
> + struct sun4i_backend *backend = engine_to_sun4i_backend(engine);
> + struct sun4i_frontend *frontend = backend->frontend;
> +
> + if (!frontend)
> + return;
> +
> + /*
> + * In a teardown scenario with the frontend involved, we have
> + * to keep the frontend enabled until the next vblank, and
> + * only then disable it.
> + *
> + * This is due to the fact that the backend will not take into
> + * account the new configuration (with the plane that used to
> + * be fed by the frontend now disabled) until we write to the
> + * commit bit and the hardware fetches the new configuration
> + * during the next vblank.
> + *
> + * So we keep the frontend around in order to prevent any
> + * visual artifacts.
> + */
> + spin_lock(&backend->frontend_lock);
> + if (backend->frontend_teardown) {
> + sun4i_frontend_exit(frontend);
> + backend->frontend_teardown = false;
> + }
> + spin_unlock(&backend->frontend_lock);
> +};
> +
> static int sun4i_backend_init_sat(struct device *dev) {
> struct sun4i_backend *backend = dev_get_drvdata(dev);
> int ret;
> @@ -330,11 +385,40 @@ static int sun4i_backend_of_get_id(struct device_node *node)
> return ret;
> }
>
> +static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
> + struct device_node *node)
> +{
> + struct device_node *port, *ep, *remote;
> + struct sun4i_frontend *frontend;
> +
> + port = of_graph_get_port_by_id(node, 0);
> + if (!port)
> + return ERR_PTR(-EINVAL);
> +
> + for_each_available_child_of_node(port, ep) {
> + remote = of_graph_get_remote_port_parent(ep);
> + if (!remote)
> + continue;
> +
> + /* does this node match any registered engines? */
> + list_for_each_entry(frontend, &drv->frontend_list, list) {
> + if (remote == frontend->node) {
> + of_node_put(remote);
> + of_node_put(port);
> + return frontend;
> + }
> + }
I assume that since you are only enabling support on the A33, you are
not considering dual display pipeline cases. We have cross connections
in the of graph for those situations, i.e. frontend0 can output to both
backend0 and backend1, as described in the following link:
http://elixir.free-electrons.com/linux/v4.15-rc8/source/arch/arm/boot/dts/sun6i-a31.dtsi#L1177
So with your code, both backends would end up using frontend0, and
if both display pipelines are active, one would potentially step on
the other.
Instead, have the frontend store its ID in its data structure, and
have the backend look through the list of frontends to find a match
for the backend's ID. This is what we already do for engine <-> TCON:
http://elixir.free-electrons.com/linux/v4.15-rc8/source/drivers/gpu/drm/sun4i/sun4i_tcon.c#L583
Or just leave a TODO note and I can do it later. :)
Otherwise,
Reviewed-by: Chen-Yu Tsai <[email protected]>
> + }
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> static const struct sunxi_engine_ops sun4i_backend_engine_ops = {
> .commit = sun4i_backend_commit,
> .layers_init = sun4i_layers_init,
> .apply_color_correction = sun4i_backend_apply_color_correction,
> .disable_color_correction = sun4i_backend_disable_color_correction,
> + .vblank_quirk = sun4i_backend_vblank_quirk,
> };
>
> static struct regmap_config sun4i_backend_regmap_config = {
> @@ -360,6 +444,7 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
> if (!backend)
> return -ENOMEM;
> dev_set_drvdata(dev, backend);
> + spin_lock_init(&backend->frontend_lock);
>
> backend->engine.node = dev->of_node;
> backend->engine.ops = &sun4i_backend_engine_ops;
> @@ -367,6 +452,11 @@ static int sun4i_backend_bind(struct device *dev, struct device *master,
> if (backend->engine.id < 0)
> return backend->engine.id;
>
> + backend->frontend = sun4i_backend_find_frontend(drv, dev->of_node);
> + if (IS_ERR(backend->frontend)) {
> + dev_warn(dev, "Couldn't find matching frontend, frontend features disabled\n");
> + }
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> regs = devm_ioremap_resource(dev, res);
> if (IS_ERR(regs))
> diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.h b/drivers/gpu/drm/sun4i/sun4i_backend.h
> index ac3cc029f5cd..350a2dbde31a 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_backend.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_backend.h
> @@ -72,6 +72,7 @@
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL(x) ((x) << 15)
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK GENMASK(11, 10)
> #define SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(x) ((x) << 10)
> +#define SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN BIT(1)
>
> #define SUN4I_BACKEND_ATTCTL_REG1(l) (0x8a0 + (0x4 * (l)))
> #define SUN4I_BACKEND_ATTCTL_REG1_LAY_HSCAFCT GENMASK(15, 14)
> @@ -145,6 +146,7 @@
>
> struct sun4i_backend {
> struct sunxi_engine engine;
> + struct sun4i_frontend *frontend;
>
> struct reset_control *reset;
>
> @@ -154,6 +156,10 @@ struct sun4i_backend {
>
> struct clk *sat_clk;
> struct reset_control *sat_reset;
> +
> + /* Protects against races in the frontend teardown */
> + spinlock_t frontend_lock;
> + bool frontend_teardown;
> };
>
> static inline struct sun4i_backend *
> @@ -170,5 +176,7 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane);
> int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
> int layer, struct drm_plane *plane);
> +int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend,
> + int layer, uint32_t in_fmt);
>
> #endif /* _SUN4I_BACKEND_H_ */
> diff --git a/drivers/gpu/drm/sun4i/sun4i_crtc.c b/drivers/gpu/drm/sun4i/sun4i_crtc.c
> index f549f2874353..3b2d11b675e8 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_crtc.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_crtc.c
> @@ -25,6 +25,7 @@
>
> #include <video/videomode.h>
>
> +#include "sun4i_backend.h"
> #include "sun4i_crtc.h"
> #include "sun4i_drv.h"
> #include "sunxi_engine.h"
> diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.c b/drivers/gpu/drm/sun4i/sun4i_layer.c
> index b85a9a02d166..4652b25be0d2 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_layer.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_layer.c
> @@ -15,6 +15,7 @@
> #include <drm/drmP.h>
>
> #include "sun4i_backend.h"
> +#include "sun4i_frontend.h"
> #include "sun4i_layer.h"
> #include "sunxi_engine.h"
>
> @@ -48,6 +49,7 @@ static void sun4i_backend_layer_reset(struct drm_plane *plane)
> static struct drm_plane_state *
> sun4i_backend_layer_duplicate_state(struct drm_plane *plane)
> {
> + struct sun4i_layer_state *orig = state_to_sun4i_layer_state(plane->state);
> struct sun4i_layer_state *copy;
>
> copy = kzalloc(sizeof(*copy), GFP_KERNEL);
> @@ -55,6 +57,7 @@ sun4i_backend_layer_duplicate_state(struct drm_plane *plane)
> return NULL;
>
> __drm_atomic_helper_plane_duplicate_state(plane, ©->state);
> + copy->uses_frontend = orig->uses_frontend;
>
> return ©->state;
> }
> @@ -72,21 +75,45 @@ static void sun4i_backend_layer_destroy_state(struct drm_plane *plane,
> static void sun4i_backend_layer_atomic_disable(struct drm_plane *plane,
> struct drm_plane_state *old_state)
> {
> + struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(old_state);
> struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
> struct sun4i_backend *backend = layer->backend;
>
> sun4i_backend_layer_enable(backend, layer->id, false);
> +
> + if (layer_state->uses_frontend) {
> + unsigned long flags;
> +
> + spin_lock_irqsave(&backend->frontend_lock, flags);
> + backend->frontend_teardown = true;
> + spin_unlock_irqrestore(&backend->frontend_lock, flags);
> + }
> }
>
> static void sun4i_backend_layer_atomic_update(struct drm_plane *plane,
> struct drm_plane_state *old_state)
> {
> + struct sun4i_layer_state *layer_state = state_to_sun4i_layer_state(plane->state);
> struct sun4i_layer *layer = plane_to_sun4i_layer(plane);
> struct sun4i_backend *backend = layer->backend;
> + struct sun4i_frontend *frontend = backend->frontend;
> +
> + if (layer_state->uses_frontend) {
> + sun4i_frontend_init(frontend);
> + sun4i_frontend_update_coord(frontend, plane);
> + sun4i_frontend_update_buffer(frontend, plane);
> + sun4i_frontend_update_formats(frontend, plane,
> + DRM_FORMAT_ARGB8888);
> + sun4i_backend_update_layer_frontend(backend, layer->id,
> + DRM_FORMAT_ARGB8888);
> + sun4i_backend_update_layer_coord(backend, layer->id, plane);
> + sun4i_frontend_enable(frontend);
> + } else {
> + sun4i_backend_update_layer_coord(backend, layer->id, plane);
> + sun4i_backend_update_layer_formats(backend, layer->id, plane);
> + sun4i_backend_update_layer_buffer(backend, layer->id, plane);
> + }
>
> - sun4i_backend_update_layer_coord(backend, layer->id, plane);
> - sun4i_backend_update_layer_formats(backend, layer->id, plane);
> - sun4i_backend_update_layer_buffer(backend, layer->id, plane);
> sun4i_backend_layer_enable(backend, layer->id, true);
> }
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_layer.h b/drivers/gpu/drm/sun4i/sun4i_layer.h
> index d2c19348d1b0..75b4868ba87c 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_layer.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_layer.h
> @@ -24,6 +24,7 @@ struct sun4i_layer {
>
> struct sun4i_layer_state {
> struct drm_plane_state state;
> + bool uses_frontend;
> };
>
> static inline struct sun4i_layer *
> --
> git-series 0.9.1
Hi,
On Wed, Jan 17, 2018 at 09:43:31PM +0800, Chen-Yu Tsai wrote:
> > if (sun4i_drv_node_is_connector(node))
> > return 0;
> >
> > - if (!sun4i_drv_node_is_frontend(node)) {
> > + /*
> > + * If the device is either just a regular device, or an
> > + * enabled frontend supported by the driver, we add it to our
> > + * component list.
> > + */
> > + if (!sun4i_drv_node_is_frontend(node) ||
> > + (sun4i_drv_node_is_supported_frontend(node) &&
> > + of_device_is_available(node))) {
>
> Nit: sun4i_drv_node_is_supported_frontend should be a subset of
> sun4i_drv_node_is_frontend, so of_device_is_available should always
> be true at this point.
That's not really the condition though :)
It's if the device is *not* a frontend or if it is a supported
frontend that is available, add it to the endpoints list.
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
> > + SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(1) |
> > + SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(in_fmt_val) |
> > + SUN4I_FRONTEND_INPUT_FMT_PS(1));
> > + regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
> > + SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(out_fmt_val));
>
> Seems that you also need to set the "ALPHA_EN" bit for ARGB.
I have not seen that bit documented anywhere. Where is it coming from?
> > + frontend->reset = devm_reset_control_get(dev, NULL);
> > + if (IS_ERR(frontend->reset)) {
> > + dev_err(dev, "Couldn't get our reset line\n");
> > + return PTR_ERR(frontend->reset);
> > + }
> > + reset_control_reset(frontend->reset);
>
> reset_control_reset leaves the reset control deasserted. At this
> point the clock might not be running, which might mean the internal
> state is not completely wiped out. (Though this really depends on
> the design of the internal logic.)
>
> Maybe just assert it? It gets deasserted in the runtime PM callback
> later. And just to be safe, I would move it close to the end of the
> probe path, past all possible errors, so the hardware doesn't get
> touched until everything is ready. Or don't touch it anywhere in
> the probe path, and have the runtime PM resume function do a reset.
That seems like the best solution yes.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Hi,
On Wed, Jan 17, 2018 at 09:46:13PM +0800, Chen-Yu Tsai wrote:
> > + for_each_available_child_of_node(port, ep) {
> > + remote = of_graph_get_remote_port_parent(ep);
> > + if (!remote)
> > + continue;
> > +
> > + /* does this node match any registered engines? */
> > + list_for_each_entry(frontend, &drv->frontend_list, list) {
> > + if (remote == frontend->node) {
> > + of_node_put(remote);
> > + of_node_put(port);
> > + return frontend;
> > + }
> > + }
>
> I assume that since you are only enabling support on the A33, you are
> not considering dual display pipeline cases. We have cross connections
> in the of graph for those situations, i.e. frontend0 can output to both
> backend0 and backend1, as described in the following link:
>
> http://elixir.free-electrons.com/linux/v4.15-rc8/source/arch/arm/boot/dts/sun6i-a31.dtsi#L1177
>
> So with your code, both backends would end up using frontend0, and
> if both display pipelines are active, one would potentially step on
> the other.
>
> Instead, have the frontend store its ID in its data structure, and
> have the backend look through the list of frontends to find a match
> for the backend's ID. This is what we already do for engine <-> TCON:
>
> http://elixir.free-electrons.com/linux/v4.15-rc8/source/drivers/gpu/drm/sun4i/sun4i_tcon.c#L583
>
> Or just leave a TODO note and I can do it later. :)
We discussed it on IRC, and yes, I don't have a test setup right now
with two pipelines being used, and there's a few changes that need to
be made for it to operate properly on the A10/A20. That's why I only
added the A33 in the supported list at the moment.
I'll add a TODO note
> Otherwise,
>
> Reviewed-by: Chen-Yu Tsai <[email protected]>
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
On Thu, Jan 18, 2018 at 3:22 PM, Maxime Ripard
<[email protected]> wrote:
> Hi,
>
> On Wed, Jan 17, 2018 at 09:43:31PM +0800, Chen-Yu Tsai wrote:
>> > if (sun4i_drv_node_is_connector(node))
>> > return 0;
>> >
>> > - if (!sun4i_drv_node_is_frontend(node)) {
>> > + /*
>> > + * If the device is either just a regular device, or an
>> > + * enabled frontend supported by the driver, we add it to our
>> > + * component list.
>> > + */
>> > + if (!sun4i_drv_node_is_frontend(node) ||
>> > + (sun4i_drv_node_is_supported_frontend(node) &&
>> > + of_device_is_available(node))) {
>>
>> Nit: sun4i_drv_node_is_supported_frontend should be a subset of
>> sun4i_drv_node_is_frontend, so of_device_is_available should always
>> be true at this point.
>
> That's not really the condition though :)
>
> It's if the device is *not* a frontend or if it is a supported
> frontend that is available, add it to the endpoints list.
Right. I got confused by the inverted logic. Sorry.
>
>> > + regmap_write(frontend->regs, SUN4I_FRONTEND_INPUT_FMT_REG,
>> > + SUN4I_FRONTEND_INPUT_FMT_DATA_MOD(1) |
>> > + SUN4I_FRONTEND_INPUT_FMT_DATA_FMT(in_fmt_val) |
>> > + SUN4I_FRONTEND_INPUT_FMT_PS(1));
>> > + regmap_write(frontend->regs, SUN4I_FRONTEND_OUTPUT_FMT_REG,
>> > + SUN4I_FRONTEND_OUTPUT_FMT_DATA_FMT(out_fmt_val));
>>
>> Seems that you also need to set the "ALPHA_EN" bit for ARGB.
>
> I have not seen that bit documented anywhere. Where is it coming from?
The A31's user manual. I just checked all the datasheets, and only
the A31 and the A80 have this bit (bit 7) defined. It says if the
bit is cleared, alpha is replaced with 0xff. I assume it works either
way on the A33, or you wouldn't be suprised. Leave it out for now then.
(Or maybe a TODO note now that we know about it.)
ChenYu
>
>> > + frontend->reset = devm_reset_control_get(dev, NULL);
>> > + if (IS_ERR(frontend->reset)) {
>> > + dev_err(dev, "Couldn't get our reset line\n");
>> > + return PTR_ERR(frontend->reset);
>> > + }
>> > + reset_control_reset(frontend->reset);
>>
>> reset_control_reset leaves the reset control deasserted. At this
>> point the clock might not be running, which might mean the internal
>> state is not completely wiped out. (Though this really depends on
>> the design of the internal logic.)
>>
>> Maybe just assert it? It gets deasserted in the runtime PM callback
>> later. And just to be safe, I would move it close to the end of the
>> probe path, past all possible errors, so the hardware doesn't get
>> touched until everything is ready. Or don't touch it anywhere in
>> the probe path, and have the runtime PM resume function do a reset.
>
> That seems like the best solution yes.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com