Hi Linus,
The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
are available in the git repository at:
git://http://www.linux-watchdog.org/linux-watchdog.git
for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
----------------------------------------------------------------
Andreas F?rber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295
Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo in Kconfig
watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
watchdog: aspeed: Move init to arch_initcall
Andr? Draszik (2):
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
Arnd Bergmann (2):
watchdog: xen: use time64_t for timeouts
watchdog: hpwdt: fix unused variable warning
Benjamin Gaignard (1):
watchdog: stm32: Fix copyright
Chris Packham (1):
watchdog: orion: fix typo
Christophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure the watchdog_worker is not deferred
Corentin Labbe (6):
watchdog: sunxi_wdt: use of_device_get_match_data
watchdog: document watchdog_init_timeout() wdd parameter
watchdog: remove at32ap700x_wdt
documentation: watchdog: remove documentation of at32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
David Lechner (1):
watchdog: davinci_wdt: add restart function
Eric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driver
Geert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
Greg Kroah-Hartman (1):
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
Guenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Add support for recent FCH versions
Gustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog: alim1535_wdt: mark expected switch fall-through
watchdog: f71808e_wdt: mark expected switch fall-throughs
watchdog: pcwd_usb: mark expected switch fall-through
watchdog: pcwd_pci: mark expected switch fall-through
watchdog: watchdog_dev: mark expected switch fall-through
watchdog: wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-through
Jerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMI
Linus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optional
Martin Kaiser (1):
watchdog: imx2_wdt: restore previous timeout after suspend+resume
Mathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780
Matt Redfearn (1):
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
Michael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from core
Oleksij Rempel (1):
watchdog: dw_wdt: add stop watchdog operation
Radu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog: xen_wdt: use the watchdog subsystem
watchdog: xen_wdt: remove info message and version number
Rasmus Villemoes (1):
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
Tomas Winkler (1):
watchdog: mei_wdt: don't use of variable length array
Wim Van Sebroeck (1):
Change my E-mail address.
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
.../bindings/watchdog/realtek,rtd119x.txt | 17 +
.../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
.../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
Documentation/watchdog/watchdog-parameters.txt | 23 -
MAINTAINERS | 4 +-
drivers/watchdog/Kconfig | 41 +-
drivers/watchdog/Makefile | 7 +-
drivers/watchdog/advantechwdt.c | 2 +-
drivers/watchdog/alim1535_wdt.c | 2 +-
drivers/watchdog/aspeed_wdt.c | 21 +-
drivers/watchdog/at32ap700x_wdt.c | 433 -------------
drivers/watchdog/da9062_wdt.c | 48 +-
drivers/watchdog/davinci_wdt.c | 38 ++
drivers/watchdog/dw_wdt.c | 18 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
drivers/watchdog/gemini_wdt.c | 229 -------
drivers/watchdog/gpio_wdt.c | 58 +-
drivers/watchdog/hpwdt.c | 12 +-
drivers/watchdog/i6300esb.c | 377 ++++-------
drivers/watchdog/ib700wdt.c | 2 +-
drivers/watchdog/imx2_wdt.c | 20 +-
drivers/watchdog/jz4740_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 7 +-
drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
drivers/watchdog/mt7621_wdt.c | 34 +-
drivers/watchdog/orion_wdt.c | 2 +-
drivers/watchdog/pcwd_pci.c | 2 +-
drivers/watchdog/pcwd_usb.c | 5 +-
drivers/watchdog/rtd119x_wdt.c | 168 +++++
drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
drivers/watchdog/sp5100_tco.h | 57 +-
drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
drivers/watchdog/stm32_iwdg.c | 6 +-
drivers/watchdog/sunxi_wdt.c | 7 +-
drivers/watchdog/watchdog_core.c | 1 +
drivers/watchdog/watchdog_dev.c | 125 ++--
drivers/watchdog/wdt_pci.c | 2 +-
drivers/watchdog/xen_wdt.c | 255 ++------
43 files changed, 1711 insertions(+), 1801 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
create mode 100644 drivers/watchdog/ftwdt010_wdt.c
delete mode 100644 drivers/watchdog/gemini_wdt.c
create mode 100644 drivers/watchdog/rtd119x_wdt.c
create mode 100644 drivers/watchdog/sprd_wdt.c
On Mon, Feb 5, 2018 at 2:20 AM, Wim Van Sebroeck <[email protected]> wrote:
>
> git://http://www.linux-watchdog.org/linux-watchdog.git
Hmm. I really want to know why I should pull this. You have the
shortlog and the diffstat, but you don't actually have a descriptive
blurb about _what_ I'm pulling.
Please give me a summary of what this contains so that I can have a
good merge message.
Linus
On Mon, Feb 05, 2018 at 09:50:54AM -0800, Linus Torvalds wrote:
> On Mon, Feb 5, 2018 at 2:20 AM, Wim Van Sebroeck <[email protected]> wrote:
> >
> > git://http://www.linux-watchdog.org/linux-watchdog.git
>
> Hmm. I really want to know why I should pull this. You have the
> shortlog and the diffstat, but you don't actually have a descriptive
> blurb about _what_ I'm pulling.
>
> Please give me a summary of what this contains so that I can have a
> good merge message.
How about the following ? It matches Wim's tree, which I pulled and
compared against my own copy. Only difference is the signed tag
with a brief summary on top.
Thanks,
Guenter
---
Subject: [GIT PULL] watchdog updates for v4.16
Hi Linus,
Please pull watchdog updates for Linux v4.16 from signed tag:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git watchdog-for-linus-v4.16
Thanks,
Guenter
------
The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/watchdog-for-linus-v4.16
for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
----------------------------------------------------------------
watchdog updates for v4.16 commit window
- Converted to use watchdog subsystem: sp5100_tco, i6300esb, xen_wdt
- New drivers: Spreadtrum, Realtek RTD1295
- Added r8a77970 support to renesas-wdt
- Added jz4780 support to jz4740
- Removed at32ap700x_wdt driver
- Removed obsolete documentation
- Various bug fixes in watchdog core
- Cleanup and bug fixes in several drivers
- Added Guenter Roeck as co-maintainer
----------------------------------------------------------------
Andreas F?rber (2):
dt-bindings: watchdog: Add Realtek RTD1295
watchdog: Add Realtek RTD1295
Andrew Jeffery (4):
watchdog: aspeed: Retain watchdog enabled state
watchdog: aspeed: Fix 'Apseed' typo in Kconfig
watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
watchdog: aspeed: Move init to arch_initcall
Andr? Draszik (2):
watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
watchdog: mt7621: switch to using managed devm_watchdog_register_device()
Arnd Bergmann (2):
watchdog: xen: use time64_t for timeouts
watchdog: hpwdt: fix unused variable warning
Benjamin Gaignard (1):
watchdog: stm32: Fix copyright
Chris Packham (1):
watchdog: orion: fix typo
Christophe Leroy (3):
watchdog: mpc8xxx: use the core worker function
watchdog: core: make sure the watchdog worker always works
watchdog: core: make sure the watchdog_worker is not deferred
Corentin Labbe (6):
watchdog: sunxi_wdt: use of_device_get_match_data
watchdog: document watchdog_init_timeout() wdd parameter
watchdog: remove at32ap700x_wdt
documentation: watchdog: remove documentation of at32ap700x_wdt
documentation: watchdog: remove documentation for ixp2000
documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
David Lechner (1):
watchdog: davinci_wdt: add restart function
Eric Long (2):
dt-bindings: watchdog: Add Spreadtrum watchdog documentation
watchdog: Add Spreadtrum watchdog driver
Geert Uytterhoeven (1):
dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
Greg Kroah-Hartman (1):
watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
Guenter Roeck (15):
watchdog: Fix potential kref imbalance when opening watchdog
watchdog: Fix kref imbalance seen if handle_boot_enabled=0
MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
watchdog: sp5100_tco: Fix watchdog disable bit
watchdog: sp5100_tco: Use request_muxed_region where possible
watchdog: sp5100_tco: Use standard error codes
watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
watchdog: sp5100_tco: Match PCI device early
watchdog: sp5100_tco: Use dev_ print functions where possible
watchdog: sp5100_tco: Clean up function and variable names
watchdog: sp5100_tco: Convert to use watchdog subsystem
watchdog: sp5100_tco: Use bit operations
watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
watchdog: sp5100_tco: Add support for recent FCH versions
Gustavo A. R. Silva (9):
watchdog: advantechwdt: mark expected switch fall-through
watchdog: alim1535_wdt: mark expected switch fall-through
watchdog: f71808e_wdt: mark expected switch fall-throughs
watchdog: pcwd_usb: mark expected switch fall-through
watchdog: pcwd_pci: mark expected switch fall-through
watchdog: watchdog_dev: mark expected switch fall-through
watchdog: wdt_pci: mark expected switch fall-through
watchdog: eurotechwdt: mark expected switch fall-through
watchdog: ib700wdt: mark expected switch fall-through
Jerry Hoemann (2):
watchdog: hpwdt: SMBIOS check
watchdog: hpwdt: Check source of NMI
Linus Walleij (5):
watchdog: gpio: Add some local helper variables
watchdog: gpio: Convert to use GPIO descriptors
watchdog: gemini/ftwdt010: rename DT bindings
watchdog: gemini/ftwdt010: rename driver and symbols
watchdog: ftwdt010: Make interrupt optional
Martin Kaiser (1):
watchdog: imx2_wdt: restore previous timeout after suspend+resume
Mathieu Malaterre (2):
watchdog: jz4740: Add support for the watchdog in jz4780 SoC
dt: watchdog: Document compatibility with JZ4780
Matt Redfearn (1):
watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
Michael Grzeschik (3):
watchdog: da9062: Add restart handler support
watchdog: da9062: Disable and wait before changing timeout
watchdog: da9062: use protection delay mechanism from core
Oleksij Rempel (1):
watchdog: dw_wdt: add stop watchdog operation
Radu Rendec (6):
watchdog: i6300esb: use the watchdog subsystem
watchdog: i6300esb: support multiple devices
watchdog: i6300esb: do not hardcode heartbeat limits
watchdog: i6300esb: remove info message and version number
watchdog: xen_wdt: use the watchdog subsystem
watchdog: xen_wdt: remove info message and version number
Rasmus Villemoes (1):
watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
Tomas Winkler (1):
watchdog: mei_wdt: don't use of variable length array
Wim Van Sebroeck (1):
Change my E-mail address.
.../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
.../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
.../bindings/watchdog/realtek,rtd119x.txt | 17 +
.../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
.../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
Documentation/watchdog/watchdog-parameters.txt | 23 -
MAINTAINERS | 4 +-
drivers/watchdog/Kconfig | 41 +-
drivers/watchdog/Makefile | 7 +-
drivers/watchdog/advantechwdt.c | 2 +-
drivers/watchdog/alim1535_wdt.c | 2 +-
drivers/watchdog/aspeed_wdt.c | 21 +-
drivers/watchdog/at32ap700x_wdt.c | 433 -------------
drivers/watchdog/da9062_wdt.c | 48 +-
drivers/watchdog/davinci_wdt.c | 38 ++
drivers/watchdog/dw_wdt.c | 18 +-
drivers/watchdog/eurotechwdt.c | 2 +-
drivers/watchdog/f71808e_wdt.c | 4 +-
drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
drivers/watchdog/gemini_wdt.c | 229 -------
drivers/watchdog/gpio_wdt.c | 58 +-
drivers/watchdog/hpwdt.c | 12 +-
drivers/watchdog/i6300esb.c | 377 ++++-------
drivers/watchdog/ib700wdt.c | 2 +-
drivers/watchdog/imx2_wdt.c | 20 +-
drivers/watchdog/jz4740_wdt.c | 1 +
drivers/watchdog/mei_wdt.c | 7 +-
drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
drivers/watchdog/mt7621_wdt.c | 34 +-
drivers/watchdog/orion_wdt.c | 2 +-
drivers/watchdog/pcwd_pci.c | 2 +-
drivers/watchdog/pcwd_usb.c | 5 +-
drivers/watchdog/rtd119x_wdt.c | 168 +++++
drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
drivers/watchdog/sp5100_tco.h | 57 +-
drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
drivers/watchdog/stm32_iwdg.c | 6 +-
drivers/watchdog/sunxi_wdt.c | 7 +-
drivers/watchdog/watchdog_core.c | 1 +
drivers/watchdog/watchdog_dev.c | 125 ++--
drivers/watchdog/wdt_pci.c | 2 +-
drivers/watchdog/xen_wdt.c | 255 ++------
43 files changed, 1711 insertions(+), 1801 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
create mode 100644 drivers/watchdog/ftwdt010_wdt.c
delete mode 100644 drivers/watchdog/gemini_wdt.c
create mode 100644 drivers/watchdog/rtd119x_wdt.c
create mode 100644 drivers/watchdog/sprd_wdt.c
On 02/05/2018 10:42 AM, Guenter Roeck wrote:
> On Mon, Feb 05, 2018 at 09:50:54AM -0800, Linus Torvalds wrote:
>> On Mon, Feb 5, 2018 at 2:20 AM, Wim Van Sebroeck <[email protected]> wrote:
>>>
>>> git://http://www.linux-watchdog.org/linux-watchdog.git
>>
>> Hmm. I really want to know why I should pull this. You have the
>> shortlog and the diffstat, but you don't actually have a descriptive
>> blurb about _what_ I'm pulling.
>>
>> Please give me a summary of what this contains so that I can have a
>> good merge message.
>
> How about the following ? It matches Wim's tree, which I pulled and
> compared against my own copy. Only difference is the signed tag
> with a brief summary on top.
>
Ok, for my part I am out of ideas. Any suggestion how to proceed, anyone,
let me know.
Guenter
> Thanks,
> Guenter
>
> ---
> Subject: [GIT PULL] watchdog updates for v4.16
>
> Hi Linus,
>
> Please pull watchdog updates for Linux v4.16 from signed tag:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git watchdog-for-linus-v4.16
>
> Thanks,
> Guenter
> ------
>
> The following changes since commit f3b5ad89de16f5d42e8ad36fbdf85f705c1ae051:
>
> Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma (2017-12-16 13:43:08 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/watchdog-for-linus-v4.16
>
> for you to fetch changes up to 592a547adf686dbec7687e816ecdf9101fe227f5:
>
> documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt (2018-02-03 11:09:54 +0100)
>
> ----------------------------------------------------------------
> watchdog updates for v4.16 commit window
>
> - Converted to use watchdog subsystem: sp5100_tco, i6300esb, xen_wdt
> - New drivers: Spreadtrum, Realtek RTD1295
> - Added r8a77970 support to renesas-wdt
> - Added jz4780 support to jz4740
> - Removed at32ap700x_wdt driver
> - Removed obsolete documentation
> - Various bug fixes in watchdog core
> - Cleanup and bug fixes in several drivers
> - Added Guenter Roeck as co-maintainer
>
> ----------------------------------------------------------------
> Andreas Färber (2):
> dt-bindings: watchdog: Add Realtek RTD1295
> watchdog: Add Realtek RTD1295
>
> Andrew Jeffery (4):
> watchdog: aspeed: Retain watchdog enabled state
> watchdog: aspeed: Fix 'Apseed' typo in Kconfig
> watchdog: aspeed: Remove specific reference to AST2400 in Kconfig
> watchdog: aspeed: Move init to arch_initcall
>
> André Draszik (2):
> watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate
> watchdog: mt7621: switch to using managed devm_watchdog_register_device()
>
> Arnd Bergmann (2):
> watchdog: xen: use time64_t for timeouts
> watchdog: hpwdt: fix unused variable warning
>
> Benjamin Gaignard (1):
> watchdog: stm32: Fix copyright
>
> Chris Packham (1):
> watchdog: orion: fix typo
>
> Christophe Leroy (3):
> watchdog: mpc8xxx: use the core worker function
> watchdog: core: make sure the watchdog worker always works
> watchdog: core: make sure the watchdog_worker is not deferred
>
> Corentin Labbe (6):
> watchdog: sunxi_wdt: use of_device_get_match_data
> watchdog: document watchdog_init_timeout() wdd parameter
> watchdog: remove at32ap700x_wdt
> documentation: watchdog: remove documentation of at32ap700x_wdt
> documentation: watchdog: remove documentation for ixp2000
> documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt
>
> David Lechner (1):
> watchdog: davinci_wdt: add restart function
>
> Eric Long (2):
> dt-bindings: watchdog: Add Spreadtrum watchdog documentation
> watchdog: Add Spreadtrum watchdog driver
>
> Geert Uytterhoeven (1):
> dt-bindings: watchdog: renesas-wdt: Add support for the r8a77970 wdt
>
> Greg Kroah-Hartman (1):
> watchdog: pcwd_usb: remove unneeded DRIVER_LICENSE #define
>
> Guenter Roeck (15):
> watchdog: Fix potential kref imbalance when opening watchdog
> watchdog: Fix kref imbalance seen if handle_boot_enabled=0
> MAINTAINERS: Add Guenter Roeck as co-maintainer of watchdog subsystem
> watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG}
> watchdog: sp5100_tco: Fix watchdog disable bit
> watchdog: sp5100_tco: Use request_muxed_region where possible
> watchdog: sp5100_tco: Use standard error codes
> watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
> watchdog: sp5100_tco: Match PCI device early
> watchdog: sp5100_tco: Use dev_ print functions where possible
> watchdog: sp5100_tco: Clean up function and variable names
> watchdog: sp5100_tco: Convert to use watchdog subsystem
> watchdog: sp5100_tco: Use bit operations
> watchdog: sp5100-tco: Abort if watchdog is disabled by hardware
> watchdog: sp5100_tco: Add support for recent FCH versions
>
> Gustavo A. R. Silva (9):
> watchdog: advantechwdt: mark expected switch fall-through
> watchdog: alim1535_wdt: mark expected switch fall-through
> watchdog: f71808e_wdt: mark expected switch fall-throughs
> watchdog: pcwd_usb: mark expected switch fall-through
> watchdog: pcwd_pci: mark expected switch fall-through
> watchdog: watchdog_dev: mark expected switch fall-through
> watchdog: wdt_pci: mark expected switch fall-through
> watchdog: eurotechwdt: mark expected switch fall-through
> watchdog: ib700wdt: mark expected switch fall-through
>
> Jerry Hoemann (2):
> watchdog: hpwdt: SMBIOS check
> watchdog: hpwdt: Check source of NMI
>
> Linus Walleij (5):
> watchdog: gpio: Add some local helper variables
> watchdog: gpio: Convert to use GPIO descriptors
> watchdog: gemini/ftwdt010: rename DT bindings
> watchdog: gemini/ftwdt010: rename driver and symbols
> watchdog: ftwdt010: Make interrupt optional
>
> Martin Kaiser (1):
> watchdog: imx2_wdt: restore previous timeout after suspend+resume
>
> Mathieu Malaterre (2):
> watchdog: jz4740: Add support for the watchdog in jz4780 SoC
> dt: watchdog: Document compatibility with JZ4780
>
> Matt Redfearn (1):
> watchdog: indydog: Add dependency on SGI_HAS_INDYDOG
>
> Michael Grzeschik (3):
> watchdog: da9062: Add restart handler support
> watchdog: da9062: Disable and wait before changing timeout
> watchdog: da9062: use protection delay mechanism from core
>
> Oleksij Rempel (1):
> watchdog: dw_wdt: add stop watchdog operation
>
> Radu Rendec (6):
> watchdog: i6300esb: use the watchdog subsystem
> watchdog: i6300esb: support multiple devices
> watchdog: i6300esb: do not hardcode heartbeat limits
> watchdog: i6300esb: remove info message and version number
> watchdog: xen_wdt: use the watchdog subsystem
> watchdog: xen_wdt: remove info message and version number
>
> Rasmus Villemoes (1):
> watchdog: gpio_wdt: set WDOG_HW_RUNNING in gpio_wdt_stop
>
> Tomas Winkler (1):
> watchdog: mei_wdt: don't use of variable length array
>
> Wim Van Sebroeck (1):
> Change my E-mail address.
>
> .../bindings/watchdog/cortina,gemini-watchdog.txt | 17 -
> ...ina,gemin-watchdog.txt => faraday,ftwdt010.txt} | 11 +-
> .../bindings/watchdog/ingenic,jz4740-wdt.txt | 4 +-
> .../bindings/watchdog/realtek,rtd119x.txt | 17 +
> .../devicetree/bindings/watchdog/renesas-wdt.txt | 3 +-
> .../devicetree/bindings/watchdog/sprd-wdt.txt | 19 +
> Documentation/watchdog/watchdog-parameters.txt | 23 -
> MAINTAINERS | 4 +-
> drivers/watchdog/Kconfig | 41 +-
> drivers/watchdog/Makefile | 7 +-
> drivers/watchdog/advantechwdt.c | 2 +-
> drivers/watchdog/alim1535_wdt.c | 2 +-
> drivers/watchdog/aspeed_wdt.c | 21 +-
> drivers/watchdog/at32ap700x_wdt.c | 433 -------------
> drivers/watchdog/da9062_wdt.c | 48 +-
> drivers/watchdog/davinci_wdt.c | 38 ++
> drivers/watchdog/dw_wdt.c | 18 +-
> drivers/watchdog/eurotechwdt.c | 2 +-
> drivers/watchdog/f71808e_wdt.c | 4 +-
> drivers/watchdog/ftwdt010_wdt.c | 236 +++++++
> drivers/watchdog/gemini_wdt.c | 229 -------
> drivers/watchdog/gpio_wdt.c | 58 +-
> drivers/watchdog/hpwdt.c | 12 +-
> drivers/watchdog/i6300esb.c | 377 ++++-------
> drivers/watchdog/ib700wdt.c | 2 +-
> drivers/watchdog/imx2_wdt.c | 20 +-
> drivers/watchdog/jz4740_wdt.c | 1 +
> drivers/watchdog/mei_wdt.c | 7 +-
> drivers/watchdog/mpc8xxx_wdt.c | 83 ++-
> drivers/watchdog/mt7621_wdt.c | 34 +-
> drivers/watchdog/orion_wdt.c | 2 +-
> drivers/watchdog/pcwd_pci.c | 2 +-
> drivers/watchdog/pcwd_usb.c | 5 +-
> drivers/watchdog/rtd119x_wdt.c | 168 +++++
> drivers/watchdog/sp5100_tco.c | 710 +++++++++------------
> drivers/watchdog/sp5100_tco.h | 57 +-
> drivers/watchdog/sprd_wdt.c | 399 ++++++++++++
> drivers/watchdog/stm32_iwdg.c | 6 +-
> drivers/watchdog/sunxi_wdt.c | 7 +-
> drivers/watchdog/watchdog_core.c | 1 +
> drivers/watchdog/watchdog_dev.c | 125 ++--
> drivers/watchdog/wdt_pci.c | 2 +-
> drivers/watchdog/xen_wdt.c | 255 ++------
> 43 files changed, 1711 insertions(+), 1801 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
> rename Documentation/devicetree/bindings/watchdog/{cortina,gemin-watchdog.txt => faraday,ftwdt010.txt} (55%)
> create mode 100644 Documentation/devicetree/bindings/watchdog/realtek,rtd119x.txt
> create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
> create mode 100644 drivers/watchdog/ftwdt010_wdt.c
> delete mode 100644 drivers/watchdog/gemini_wdt.c
> create mode 100644 drivers/watchdog/rtd119x_wdt.c
> create mode 100644 drivers/watchdog/sprd_wdt.c
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>