This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
The original commit has several problems:
- vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on, which
leads to system hang when disabling unused regulators.
- GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are not
considered, and will fail to work after adding this commit.
This indicates that this patch should be not tested at all.
Signed-off-by: Icenowy Zheng <[email protected]>
---
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57 ------------------------
1 file changed, 57 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
index 51e6f1d21c32..a565316eb340 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -86,10 +86,6 @@
};
};
-&cpu0 {
- cpu-supply = <®_dcdc3>;
-};
-
&ehci0 {
status = "okay";
};
@@ -155,17 +151,6 @@
status = "okay";
};
-&p2wi {
- status = "okay";
-
- axp22x: pmic@68 {
- compatible = "x-powers,axp221";
- reg = <0x68>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
&pio {
gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
pins = "PA21";
@@ -191,48 +176,6 @@
};
};
-#include "axp22x.dtsi"
-
-®_dc5ldo {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-cpus";
-};
-
-®_dcdc1 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vdd-3v0";
-};
-
-®_dcdc2 {
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-gpu";
-};
-
-®_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-cpu";
-};
-
-®_dcdc4 {
- regulator-always-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1320000>;
- regulator-name = "vdd-sys-dll";
-};
-
-®_dcdc5 {
- regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vcc-dram";
-};
-
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.15.1
Hello,
On Sat, 3 Feb 2018 19:23:53 +0800
Icenowy Zheng <[email protected]> wrote:
> This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
>
> The original commit has several problems:
>
> - vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on, which
> leads to system hang when disabling unused regulators.
Indeed I should have make those always-on.
> - GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are not
> considered, and will fail to work after adding this commit.
While I understand the problem with vdd-cpus and aldo3 I don't see why
when you don't declare regulator the code should do something with it.
DT is supposed to describe the hardware and the code should not use
hardware not described right ?
The gmac node doesn't declare any regulators and the mmc2 uses
reg_vcc3v0 (haven't checked on the schematics yet if it is correct).
> This indicates that this patch should be not tested at all.
This have indeed not been tested with linux.
I think that this commit should not be reverted, I'll send a proper
patch tonight or tomorow night max.
P.S.: Also as I'm the original sender I think I should have been in CC
no ?
Cheers,
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57 ------------------------
> 1 file changed, 57 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> index 51e6f1d21c32..a565316eb340 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> @@ -86,10 +86,6 @@
> };
> };
>
> -&cpu0 {
> - cpu-supply = <®_dcdc3>;
> -};
> -
> &ehci0 {
> status = "okay";
> };
> @@ -155,17 +151,6 @@
> status = "okay";
> };
>
> -&p2wi {
> - status = "okay";
> -
> - axp22x: pmic@68 {
> - compatible = "x-powers,axp221";
> - reg = <0x68>;
> - interrupt-parent = <&nmi_intc>;
> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> - };
> -};
> -
> &pio {
> gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
> pins = "PA21";
> @@ -191,48 +176,6 @@
> };
> };
>
> -#include "axp22x.dtsi"
> -
> -®_dc5ldo {
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpus";
> -};
> -
> -®_dcdc1 {
> - regulator-always-on;
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-name = "vdd-3v0";
> -};
> -
> -®_dcdc2 {
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-gpu";
> -};
> -
> -®_dcdc3 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpu";
> -};
> -
> -®_dcdc4 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-sys-dll";
> -};
> -
> -®_dcdc5 {
> - regulator-always-on;
> - regulator-min-microvolt = <1500000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-name = "vcc-dram";
> -};
> -
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins_a>;
> --
> 2.15.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Emmanuel Vadot <[email protected]> <[email protected]>
于 2018年2月5日 GMT+08:00 下午4:55:58, Emmanuel Vadot <[email protected]> 写到:
>
> Hello,
>
>On Sat, 3 Feb 2018 19:23:53 +0800
>Icenowy Zheng <[email protected]> wrote:
>
>> This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
>>
>> The original commit has several problems:
>>
>> - vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on,
>which
>> leads to system hang when disabling unused regulators.
>
> Indeed I should have make those always-on.
>
>> - GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are
>not
>> considered, and will fail to work after adding this commit.
>
> While I understand the problem with vdd-cpus and aldo3 I don't see why
>when you don't declare regulator the code should do something with it.
>DT is supposed to describe the hardware and the code should not use
>hardware not described right ?
> The gmac node doesn't declare any regulators and the mmc2 uses
>reg_vcc3v0 (haven't checked on the schematics yet if it is correct).
It's because the regulator support isn't present before
this commit. However these parts really need special
regulators. I don't have M2 schematics at hand, so you'd
check it by yourself.
P.S. a proper device tree with AXP shouldn't use
reg_vcc3v0/3v3/1v8/etc. They're dummy
regulator nodes for
not implemented or not controllable regulators.
>
>> This indicates that this patch should be not tested at all.
>
> This have indeed not been tested with linux.
> I think that this commit should not be reverted, I'll send a proper
>patch tonight or tomorow night max.
Please test patches sent to Linux on Linux :-)
>
> P.S.: Also as I'm the original sender I think I should have been in CC
>no ?
get_maintainer.pl didn't mention you and I forgot... sorry.
>
> Cheers,
>
>> Signed-off-by: Icenowy Zheng <[email protected]>
>> ---
>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57
>------------------------
>> 1 file changed, 57 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>> index 51e6f1d21c32..a565316eb340 100644
>> --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>> +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>> @@ -86,10 +86,6 @@
>> };
>> };
>>
>> -&cpu0 {
>> - cpu-supply = <®_dcdc3>;
>> -};
>> -
>> &ehci0 {
>> status = "okay";
>> };
>> @@ -155,17 +151,6 @@
>> status = "okay";
>> };
>>
>> -&p2wi {
>> - status = "okay";
>> -
>> - axp22x: pmic@68 {
>> - compatible = "x-powers,axp221";
>> - reg = <0x68>;
>> - interrupt-parent = <&nmi_intc>;
>> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> - };
>> -};
>> -
>> &pio {
>> gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
>> pins = "PA21";
>> @@ -191,48 +176,6 @@
>> };
>> };
>>
>> -#include "axp22x.dtsi"
>> -
>> -®_dc5ldo {
>> - regulator-min-microvolt = <700000>;
>> - regulator-max-microvolt = <1320000>;
>> - regulator-name = "vdd-cpus";
>> -};
>> -
>> -®_dcdc1 {
>> - regulator-always-on;
>> - regulator-min-microvolt = <3000000>;
>> - regulator-max-microvolt = <3000000>;
>> - regulator-name = "vdd-3v0";
>> -};
>> -
>> -®_dcdc2 {
>> - regulator-min-microvolt = <700000>;
>> - regulator-max-microvolt = <1320000>;
>> - regulator-name = "vdd-gpu";
>> -};
>> -
>> -®_dcdc3 {
>> - regulator-always-on;
>> - regulator-min-microvolt = <700000>;
>> - regulator-max-microvolt = <1320000>;
>> - regulator-name = "vdd-cpu";
>> -};
>> -
>> -®_dcdc4 {
>> - regulator-always-on;
>> - regulator-min-microvolt = <700000>;
>> - regulator-max-microvolt = <1320000>;
>> - regulator-name = "vdd-sys-dll";
>> -};
>> -
>> -®_dcdc5 {
>> - regulator-always-on;
>> - regulator-min-microvolt = <1500000>;
>> - regulator-max-microvolt = <1500000>;
>> - regulator-name = "vcc-dram";
>> -};
>> -
>> &uart0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&uart0_pins_a>;
>> --
>> 2.15.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 2018-02-05 10:05, Icenowy Zheng wrote:
> 于 2018年2月5日 GMT+08:00 下午4:55:58, Emmanuel Vadot <[email protected]>
> 写到:
>>
>> Hello,
>>
>> On Sat, 3 Feb 2018 19:23:53 +0800
>> Icenowy Zheng <[email protected]> wrote:
>>
>>> This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
>>>
>>> The original commit has several problems:
>>>
>>> - vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on,
>> which
>>> leads to system hang when disabling unused regulators.
>>
>> Indeed I should have make those always-on.
>>
>>> - GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are
>> not
>>> considered, and will fail to work after adding this commit.
>>
>> While I understand the problem with vdd-cpus and aldo3 I don't see why
>> when you don't declare regulator the code should do something with it.
>> DT is supposed to describe the hardware and the code should not use
>> hardware not described right ?
>> The gmac node doesn't declare any regulators and the mmc2 uses
>> reg_vcc3v0 (haven't checked on the schematics yet if it is correct).
>
> It's because the regulator support isn't present before
> this commit. However these parts really need special
> regulators. I don't have M2 schematics at hand, so you'd
> check it by yourself.
Yes but why does the PMIC should disable regulators not defined in the
DTS ? That the part I don't understand and want to know where it is
described/documented.
> P.S. a proper device tree with AXP shouldn't use
> reg_vcc3v0/3v3/1v8/etc. They're dummy
> regulator nodes for
> not implemented or not controllable regulators.
>
>>
>>> This indicates that this patch should be not tested at all.
>>
>> This have indeed not been tested with linux.
>> I think that this commit should not be reverted, I'll send a proper
>> patch tonight or tomorow night max.
>
> Please test patches sent to Linux on Linux :-)
If my patches adhere to the bindings I don't see why.
>>
>> P.S.: Also as I'm the original sender I think I should have been in CC
>> no ?
>
> get_maintainer.pl didn't mention you and I forgot... sorry.
>
>>
>> Cheers,
>>
>>> Signed-off-by: Icenowy Zheng <[email protected]>
>>> ---
>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57
>> ------------------------
>>> 1 file changed, 57 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>> b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>> index 51e6f1d21c32..a565316eb340 100644
>>> --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>> +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>> @@ -86,10 +86,6 @@
>>> };
>>> };
>>>
>>> -&cpu0 {
>>> - cpu-supply = <®_dcdc3>;
>>> -};
>>> -
>>> &ehci0 {
>>> status = "okay";
>>> };
>>> @@ -155,17 +151,6 @@
>>> status = "okay";
>>> };
>>>
>>> -&p2wi {
>>> - status = "okay";
>>> -
>>> - axp22x: pmic@68 {
>>> - compatible = "x-powers,axp221";
>>> - reg = <0x68>;
>>> - interrupt-parent = <&nmi_intc>;
>>> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>> - };
>>> -};
>>> -
>>> &pio {
>>> gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
>>> pins = "PA21";
>>> @@ -191,48 +176,6 @@
>>> };
>>> };
>>>
>>> -#include "axp22x.dtsi"
>>> -
>>> -®_dc5ldo {
>>> - regulator-min-microvolt = <700000>;
>>> - regulator-max-microvolt = <1320000>;
>>> - regulator-name = "vdd-cpus";
>>> -};
>>> -
>>> -®_dcdc1 {
>>> - regulator-always-on;
>>> - regulator-min-microvolt = <3000000>;
>>> - regulator-max-microvolt = <3000000>;
>>> - regulator-name = "vdd-3v0";
>>> -};
>>> -
>>> -®_dcdc2 {
>>> - regulator-min-microvolt = <700000>;
>>> - regulator-max-microvolt = <1320000>;
>>> - regulator-name = "vdd-gpu";
>>> -};
>>> -
>>> -®_dcdc3 {
>>> - regulator-always-on;
>>> - regulator-min-microvolt = <700000>;
>>> - regulator-max-microvolt = <1320000>;
>>> - regulator-name = "vdd-cpu";
>>> -};
>>> -
>>> -®_dcdc4 {
>>> - regulator-always-on;
>>> - regulator-min-microvolt = <700000>;
>>> - regulator-max-microvolt = <1320000>;
>>> - regulator-name = "vdd-sys-dll";
>>> -};
>>> -
>>> -®_dcdc5 {
>>> - regulator-always-on;
>>> - regulator-min-microvolt = <1500000>;
>>> - regulator-max-microvolt = <1500000>;
>>> - regulator-name = "vcc-dram";
>>> -};
>>> -
>>> &uart0 {
>>> pinctrl-names = "default";
>>> pinctrl-0 = <&uart0_pins_a>;
>>> --
>>> 2.15.1
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> [email protected]
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Emmanuel Vadot <[email protected]> <[email protected]>
On Fri, Feb 09, 2018 at 10:20:57PM +0100, Emmanuel Vadot wrote:
> > P.S. a proper device tree with AXP shouldn't use
> > reg_vcc3v0/3v3/1v8/etc. They're dummy
> > regulator nodes for
> > not implemented or not controllable regulators.
> >
> > >
> > > > This indicates that this patch should be not tested at all.
> > >
> > > This have indeed not been tested with linux.
> > > I think that this commit should not be reverted, I'll send a proper
> > > patch tonight or tomorow night max.
> >
> > Please test patches sent to Linux on Linux :-)
>
> If my patches adhere to the bindings I don't see why.
Adhering to a binding and being functional is a completely different
story.
And the latter is the most important.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
On Sat, Feb 10, 2018 at 5:20 AM, Emmanuel Vadot <[email protected]> wrote:
> On 2018-02-05 10:05, Icenowy Zheng wrote:
>>
>> 于 2018年2月5日 GMT+08:00 下午4:55:58, Emmanuel Vadot <[email protected]>
>> 写到:
>>>
>>>
>>> Hello,
>>>
>>> On Sat, 3 Feb 2018 19:23:53 +0800
>>> Icenowy Zheng <[email protected]> wrote:
>>>
>>>> This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
>>>>
>>>> The original commit has several problems:
>>>>
>>>> - vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on,
>>>
>>> which
>>>>
>>>> leads to system hang when disabling unused regulators.
>>>
>>>
>>> Indeed I should have make those always-on.
>>>
>>>> - GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are
>>>
>>> not
>>>>
>>>> considered, and will fail to work after adding this commit.
>>>
>>>
>>> While I understand the problem with vdd-cpus and aldo3 I don't see why
>>> when you don't declare regulator the code should do something with it.
>>> DT is supposed to describe the hardware and the code should not use
>>> hardware not described right ?
>>> The gmac node doesn't declare any regulators and the mmc2 uses
>>> reg_vcc3v0 (haven't checked on the schematics yet if it is correct).
>>
>>
>> It's because the regulator support isn't present before
>> this commit. However these parts really need special
>> regulators. I don't have M2 schematics at hand, so you'd
>> check it by yourself.
>
>
> Yes but why does the PMIC should disable regulators not defined in the DTS
> ? That the part I don't understand and want to know where it is
> described/documented.
They are defined. See axp22x.dtsi, which you included in your patch.
Now the system is free to do whatever it wants under the constraints
of the device tree. Since you do not reference the regulator, the
kernel is free to turn it off to save power.
>
>> P.S. a proper device tree with AXP shouldn't use
>> reg_vcc3v0/3v3/1v8/etc. They're dummy
>> regulator nodes for
>> not implemented or not controllable regulators.
>>
>>>
>>>> This indicates that this patch should be not tested at all.
>>>
>>>
>>> This have indeed not been tested with linux.
>>> I think that this commit should not be reverted, I'll send a proper
>>> patch tonight or tomorow night max.
>>
>>
>> Please test patches sent to Linux on Linux :-)
>
>
> If my patches adhere to the bindings I don't see why.
It adheres to the bindings, but does not accurately describe the
hardware constraints.
ChenYu
>
>
>>>
>>> P.S.: Also as I'm the original sender I think I should have been in CC
>>> no ?
>>
>>
>> get_maintainer.pl didn't mention you and I forgot... sorry.
>>
>>>
>>> Cheers,
>>>
>>>> Signed-off-by: Icenowy Zheng <[email protected]>
>>>> ---
>>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57
>>>
>>> ------------------------
>>>>
>>>> 1 file changed, 57 deletions(-)
>>>>
>>>> diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>>
>>> b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>>>
>>>> index 51e6f1d21c32..a565316eb340 100644
>>>> --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>>> +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
>>>> @@ -86,10 +86,6 @@
>>>> };
>>>> };
>>>>
>>>> -&cpu0 {
>>>> - cpu-supply = <®_dcdc3>;
>>>> -};
>>>> -
>>>> &ehci0 {
>>>> status = "okay";
>>>> };
>>>> @@ -155,17 +151,6 @@
>>>> status = "okay";
>>>> };
>>>>
>>>> -&p2wi {
>>>> - status = "okay";
>>>> -
>>>> - axp22x: pmic@68 {
>>>> - compatible = "x-powers,axp221";
>>>> - reg = <0x68>;
>>>> - interrupt-parent = <&nmi_intc>;
>>>> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>>>> - };
>>>> -};
>>>> -
>>>> &pio {
>>>> gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
>>>> pins = "PA21";
>>>> @@ -191,48 +176,6 @@
>>>> };
>>>> };
>>>>
>>>> -#include "axp22x.dtsi"
>>>> -
>>>> -®_dc5ldo {
>>>> - regulator-min-microvolt = <700000>;
>>>> - regulator-max-microvolt = <1320000>;
>>>> - regulator-name = "vdd-cpus";
>>>> -};
>>>> -
>>>> -®_dcdc1 {
>>>> - regulator-always-on;
>>>> - regulator-min-microvolt = <3000000>;
>>>> - regulator-max-microvolt = <3000000>;
>>>> - regulator-name = "vdd-3v0";
>>>> -};
>>>> -
>>>> -®_dcdc2 {
>>>> - regulator-min-microvolt = <700000>;
>>>> - regulator-max-microvolt = <1320000>;
>>>> - regulator-name = "vdd-gpu";
>>>> -};
>>>> -
>>>> -®_dcdc3 {
>>>> - regulator-always-on;
>>>> - regulator-min-microvolt = <700000>;
>>>> - regulator-max-microvolt = <1320000>;
>>>> - regulator-name = "vdd-cpu";
>>>> -};
>>>> -
>>>> -®_dcdc4 {
>>>> - regulator-always-on;
>>>> - regulator-min-microvolt = <700000>;
>>>> - regulator-max-microvolt = <1320000>;
>>>> - regulator-name = "vdd-sys-dll";
>>>> -};
>>>> -
>>>> -®_dcdc5 {
>>>> - regulator-always-on;
>>>> - regulator-min-microvolt = <1500000>;
>>>> - regulator-max-microvolt = <1500000>;
>>>> - regulator-name = "vcc-dram";
>>>> -};
>>>> -
>>>> &uart0 {
>>>> pinctrl-names = "default";
>>>> pinctrl-0 = <&uart0_pins_a>;
>>>> --
>>>> 2.15.1
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> [email protected]
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
> --
> Emmanuel Vadot <[email protected]> <[email protected]>
On Tue, 13 Feb 2018 18:36:24 +0800
Chen-Yu Tsai <[email protected]> wrote:
> On Sat, Feb 10, 2018 at 5:20 AM, Emmanuel Vadot <[email protected]> wrote:
> > On 2018-02-05 10:05, Icenowy Zheng wrote:
> >>
> >> ? 2018?2?5? GMT+08:00 ??4:55:58, Emmanuel Vadot <[email protected]>
> >> ??:
> >>>
> >>>
> >>> Hello,
> >>>
> >>> On Sat, 3 Feb 2018 19:23:53 +0800
> >>> Icenowy Zheng <[email protected]> wrote:
> >>>
> >>>> This reverts commit 7daa213700758b5b08fc0daab09bb139dd334165.
> >>>>
> >>>> The original commit has several problems:
> >>>>
> >>>> - vdd-cpus and aldo3 (AVCC of the SoC) are not set to always-on,
> >>>
> >>> which
> >>>>
> >>>> leads to system hang when disabling unused regulators.
> >>>
> >>>
> >>> Indeed I should have make those always-on.
> >>>
> >>>> - GMAC (which uses dldo1 and aldo2) and Wi-Fi (which uses aldo1) are
> >>>
> >>> not
> >>>>
> >>>> considered, and will fail to work after adding this commit.
> >>>
> >>>
> >>> While I understand the problem with vdd-cpus and aldo3 I don't see why
> >>> when you don't declare regulator the code should do something with it.
> >>> DT is supposed to describe the hardware and the code should not use
> >>> hardware not described right ?
> >>> The gmac node doesn't declare any regulators and the mmc2 uses
> >>> reg_vcc3v0 (haven't checked on the schematics yet if it is correct).
> >>
> >>
> >> It's because the regulator support isn't present before
> >> this commit. However these parts really need special
> >> regulators. I don't have M2 schematics at hand, so you'd
> >> check it by yourself.
> >
> >
> > Yes but why does the PMIC should disable regulators not defined in the DTS
> > ? That the part I don't understand and want to know where it is
> > described/documented.
>
> They are defined. See axp22x.dtsi, which you included in your patch.
>
> Now the system is free to do whatever it wants under the constraints
> of the device tree. Since you do not reference the regulator, the
> kernel is free to turn it off to save power.
Yeah I realized that now and feel stupid ...
Thanks for the clarification.
> >
> >> P.S. a proper device tree with AXP shouldn't use
> >> reg_vcc3v0/3v3/1v8/etc. They're dummy
> >> regulator nodes for
> >> not implemented or not controllable regulators.
> >>
> >>>
> >>>> This indicates that this patch should be not tested at all.
> >>>
> >>>
> >>> This have indeed not been tested with linux.
> >>> I think that this commit should not be reverted, I'll send a proper
> >>> patch tonight or tomorow night max.
> >>
> >>
> >> Please test patches sent to Linux on Linux :-)
> >
> >
> > If my patches adhere to the bindings I don't see why.
>
> It adheres to the bindings, but does not accurately describe the
> hardware constraints.
Is there a place where there is build of the linux kernel for
sunxi/multi7 and initrd available for download so I can add that to my
test bench ?
Cheers,
> ChenYu
>
> >
> >
> >>>
> >>> P.S.: Also as I'm the original sender I think I should have been in CC
> >>> no ?
> >>
> >>
> >> get_maintainer.pl didn't mention you and I forgot... sorry.
> >>
> >>>
> >>> Cheers,
> >>>
> >>>> Signed-off-by: Icenowy Zheng <[email protected]>
> >>>> ---
> >>>> arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 57
> >>>
> >>> ------------------------
> >>>>
> >>>> 1 file changed, 57 deletions(-)
> >>>>
> >>>> diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> >>>
> >>> b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> >>>>
> >>>> index 51e6f1d21c32..a565316eb340 100644
> >>>> --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> >>>> +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
> >>>> @@ -86,10 +86,6 @@
> >>>> };
> >>>> };
> >>>>
> >>>> -&cpu0 {
> >>>> - cpu-supply = <®_dcdc3>;
> >>>> -};
> >>>> -
> >>>> &ehci0 {
> >>>> status = "okay";
> >>>> };
> >>>> @@ -155,17 +151,6 @@
> >>>> status = "okay";
> >>>> };
> >>>>
> >>>> -&p2wi {
> >>>> - status = "okay";
> >>>> -
> >>>> - axp22x: pmic@68 {
> >>>> - compatible = "x-powers,axp221";
> >>>> - reg = <0x68>;
> >>>> - interrupt-parent = <&nmi_intc>;
> >>>> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> >>>> - };
> >>>> -};
> >>>> -
> >>>> &pio {
> >>>> gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
> >>>> pins = "PA21";
> >>>> @@ -191,48 +176,6 @@
> >>>> };
> >>>> };
> >>>>
> >>>> -#include "axp22x.dtsi"
> >>>> -
> >>>> -®_dc5ldo {
> >>>> - regulator-min-microvolt = <700000>;
> >>>> - regulator-max-microvolt = <1320000>;
> >>>> - regulator-name = "vdd-cpus";
> >>>> -};
> >>>> -
> >>>> -®_dcdc1 {
> >>>> - regulator-always-on;
> >>>> - regulator-min-microvolt = <3000000>;
> >>>> - regulator-max-microvolt = <3000000>;
> >>>> - regulator-name = "vdd-3v0";
> >>>> -};
> >>>> -
> >>>> -®_dcdc2 {
> >>>> - regulator-min-microvolt = <700000>;
> >>>> - regulator-max-microvolt = <1320000>;
> >>>> - regulator-name = "vdd-gpu";
> >>>> -};
> >>>> -
> >>>> -®_dcdc3 {
> >>>> - regulator-always-on;
> >>>> - regulator-min-microvolt = <700000>;
> >>>> - regulator-max-microvolt = <1320000>;
> >>>> - regulator-name = "vdd-cpu";
> >>>> -};
> >>>> -
> >>>> -®_dcdc4 {
> >>>> - regulator-always-on;
> >>>> - regulator-min-microvolt = <700000>;
> >>>> - regulator-max-microvolt = <1320000>;
> >>>> - regulator-name = "vdd-sys-dll";
> >>>> -};
> >>>> -
> >>>> -®_dcdc5 {
> >>>> - regulator-always-on;
> >>>> - regulator-min-microvolt = <1500000>;
> >>>> - regulator-max-microvolt = <1500000>;
> >>>> - regulator-name = "vcc-dram";
> >>>> -};
> >>>> -
> >>>> &uart0 {
> >>>> pinctrl-names = "default";
> >>>> pinctrl-0 = <&uart0_pins_a>;
> >>>> --
> >>>> 2.15.1
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> linux-arm-kernel mailing list
> >>>> [email protected]
> >>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >>
> >>
> >> _______________________________________________
> >> linux-arm-kernel mailing list
> >> [email protected]
> >> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
> >
> > --
> > Emmanuel Vadot <[email protected]> <[email protected]>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Emmanuel Vadot <[email protected]> <[email protected]>