2018-02-16 18:39:18

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v11 0/3] arm: npcm: add basic support for Nuvoton BMCs


Addressed comments from:
- Arnd: https://www.spinics.net/lists/arm-kernel/msg634442.html
- Joel: https://www.spinics.net/lists/arm-kernel/msg634554.html


Summary of changes since previous update:
- More device tree and binding doc clean up.

All changes tested on Nuvoton NPCM750 EVB.

I went ahead and decided to submit a pull request to Arnd, Olof, and
Kevin, as requested since I figured that we were about at the end of
feedback and we want to get this in.


2018-02-16 18:40:21

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v11 1/3] arm: npcm: add basic support for Nuvoton BMCs

Adds basic support for the Nuvoton NPCM750 BMC.

Signed-off-by: Brendan Higgins <[email protected]>
Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
Tested-by: Tomer Maimon <[email protected]>
Tested-by: Avi Fishman <[email protected]>
---
arch/arm/Kconfig | 2 +
arch/arm/Makefile | 1 +
arch/arm/mach-npcm/Kconfig | 48 +++++++++++++++++++++
arch/arm/mach-npcm/Makefile | 3 ++
arch/arm/mach-npcm/headsmp.S | 17 ++++++++
arch/arm/mach-npcm/npcm7xx.c | 20 +++++++++
arch/arm/mach-npcm/platsmp.c | 81 ++++++++++++++++++++++++++++++++++++
7 files changed, 172 insertions(+)
create mode 100644 arch/arm/mach-npcm/Kconfig
create mode 100644 arch/arm/mach-npcm/Makefile
create mode 100644 arch/arm/mach-npcm/headsmp.S
create mode 100644 arch/arm/mach-npcm/npcm7xx.c
create mode 100644 arch/arm/mach-npcm/platsmp.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7e3d53575486..6a8404cd5150 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -779,6 +779,8 @@ source "arch/arm/mach-netx/Kconfig"

source "arch/arm/mach-nomadik/Kconfig"

+source "arch/arm/mach-npcm/Kconfig"
+
source "arch/arm/mach-nspire/Kconfig"

source "arch/arm/plat-omap/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e83f5161fdd8..e4e537f27339 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -196,6 +196,7 @@ machine-$(CONFIG_ARCH_MEDIATEK) += mediatek
machine-$(CONFIG_ARCH_MXS) += mxs
machine-$(CONFIG_ARCH_NETX) += netx
machine-$(CONFIG_ARCH_NOMADIK) += nomadik
+machine-$(CONFIG_ARCH_NPCM) += npcm
machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OXNAS) += oxnas
machine-$(CONFIG_ARCH_OMAP1) += omap1
diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig
new file mode 100644
index 000000000000..6ff9df2636be
--- /dev/null
+++ b/arch/arm/mach-npcm/Kconfig
@@ -0,0 +1,48 @@
+menuconfig ARCH_NPCM
+ bool "Nuvoton NPCM Architecture"
+ select ARCH_REQUIRE_GPIOLIB
+ select USE_OF
+ select PINCTRL
+ select PINCTRL_NPCM7XX
+
+if ARCH_NPCM
+
+comment "NPCM7XX CPU type"
+
+config ARCH_NPCM750
+ depends on ARCH_NPCM && ARCH_MULTI_V7
+ bool "Support for NPCM750 BMC CPU (Poleg)"
+ select CACHE_L2X0
+ select CPU_V7
+ select ARM_GIC
+ select HAVE_SMP
+ select SMP
+ select SMP_ON_UP
+ select HAVE_ARM_SCU
+ select HAVE_ARM_TWD if SMP
+ select ARM_ERRATA_720789
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+ select ARM_ERRATA_794072
+ select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
+ select USB_EHCI_ROOT_HUB_TT
+ select USB_ARCH_HAS_HCD
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_HCD
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_HCD
+ select USB
+ select FIQ
+ select CPU_USE_DOMAINS
+ select GENERIC_CLOCKEVENTS
+ select CLKDEV_LOOKUP
+ select COMMON_CLK if OF
+ select NPCM750_TIMER
+ select MFD_SYSCON
+ help
+ Support for NPCM750 BMC CPU (Poleg).
+
+ Nuvoton NPCM750 BMC based on the Cortex A9.
+
+endif
diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile
new file mode 100644
index 000000000000..c7a1316d27c1
--- /dev/null
+++ b/arch/arm/mach-npcm/Makefile
@@ -0,0 +1,3 @@
+AFLAGS_headsmp.o += -march=armv7-a
+
+obj-$(CONFIG_ARCH_NPCM750) += npcm7xx.o platsmp.o headsmp.o
diff --git a/arch/arm/mach-npcm/headsmp.S b/arch/arm/mach-npcm/headsmp.S
new file mode 100644
index 000000000000..c083fe09a07b
--- /dev/null
+++ b/arch/arm/mach-npcm/headsmp.S
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+/*
+ * The boot ROM does not start secondary CPUs in SVC mode, so we need to do that
+ * here.
+ */
+ENTRY(npcm7xx_secondary_startup)
+ safe_svcmode_maskall r0
+
+ b secondary_startup
+ENDPROC(npcm7xx_secondary_startup)
diff --git a/arch/arm/mach-npcm/npcm7xx.c b/arch/arm/mach-npcm/npcm7xx.c
new file mode 100644
index 000000000000..5f7cd88103ef
--- /dev/null
+++ b/arch/arm/mach-npcm/npcm7xx.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/cache-l2x0.h>
+
+static const char *const npcm7xx_dt_match[] = {
+ "nuvoton,npcm750",
+ NULL
+};
+
+DT_MACHINE_START(NPCM7XX_DT, "NPCM7XX Chip family")
+ .atag_offset = 0x100,
+ .dt_compat = npcm7xx_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-npcm/platsmp.c b/arch/arm/mach-npcm/platsmp.c
new file mode 100644
index 000000000000..21633c70fe7f
--- /dev/null
+++ b/arch/arm/mach-npcm/platsmp.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#define pr_fmt(fmt) "nuvoton,npcm7xx-smp: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#define NPCM7XX_SCRPAD_REG 0x13c
+
+extern void npcm7xx_secondary_startup(void);
+
+static int npcm7xx_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ struct device_node *gcr_np;
+ void __iomem *gcr_base;
+ int ret = 0;
+
+ gcr_np = of_find_compatible_node(NULL, NULL, "nuvoton,npcm750-gcr");
+ if (!gcr_np) {
+ pr_err("no gcr device node\n");
+ ret = -ENODEV;
+ goto out;
+ }
+ gcr_base = of_iomap(gcr_np, 0);
+ if (!gcr_base) {
+ pr_err("could not iomap gcr");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* give boot ROM kernel start address. */
+ iowrite32(__pa_symbol(npcm7xx_secondary_startup), gcr_base +
+ NPCM7XX_SCRPAD_REG);
+ /* make sure the previous write is seen by all observers. */
+ dsb_sev();
+
+ iounmap(gcr_base);
+out:
+ return ret;
+}
+
+static void __init npcm7xx_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *scu_np;
+ void __iomem *scu_base;
+
+ scu_np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!scu_np) {
+ pr_err("no scu device node\n");
+ return;
+ }
+ scu_base = of_iomap(scu_np, 0);
+ if (!scu_base) {
+ pr_err("could not iomap scu");
+ return;
+ }
+
+ scu_enable(scu_base);
+
+ iounmap(scu_base);
+}
+
+static struct smp_operations npcm7xx_smp_ops __initdata = {
+ .smp_prepare_cpus = npcm7xx_smp_prepare_cpus,
+ .smp_boot_secondary = npcm7xx_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(npcm7xx_smp, "nuvoton,npcm750-smp", &npcm7xx_smp_ops);
--
2.16.1.291.g4437f3f132-goog


2018-02-16 18:40:53

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v11 2/3] arm: dts: add Nuvoton NPCM750 device tree

Add a common device tree for all Nuvoton NPCM750 BMCs and a board
specific device tree for the NPCM750 (Poleg) evaluation board.

Signed-off-by: Brendan Higgins <[email protected]>
Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Tested-by: Tomer Maimon <[email protected]>
Tested-by: Avi Fishman <[email protected]>
Tested-by: Joel Stanley <[email protected]>
---
.../arm/cpu-enable-method/nuvoton,npcm750-smp | 42 +++++
.../devicetree/bindings/arm/npcm/npcm.txt | 6 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 35 ++++
arch/arm/boot/dts/nuvoton-npcm750.dtsi | 165 ++++++++++++++++++
5 files changed, 250 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi

diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
new file mode 100644
index 000000000000..8e043301e28e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
@@ -0,0 +1,42 @@
+=========================================================
+Secondary CPU enable-method "nuvoton,npcm750-smp" binding
+=========================================================
+
+To apply to all CPUs, a single "nuvoton,npcm750-smp" enable method should be
+defined in the "cpus" node.
+
+Enable method name: "nuvoton,npcm750-smp"
+Compatible machines: "nuvoton,npcm750"
+Compatible CPUs: "arm,cortex-a9"
+Related properties: (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"nuvoton,npcm750-gcr".
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "nuvoton,npcm750-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk NPCM7XX_CLK_CPU>;
+ clock-names = "clk_cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
new file mode 100644
index 000000000000..2d87d9ecea85
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
@@ -0,0 +1,6 @@
+NPCM Platforms Device Tree Bindings
+-----------------------------------
+NPCM750 SoC
+Required root node properties:
+ - compatible = "nuvoton,npcm750";
+
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ade7a38543dc..eeab5dac50ab 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -304,6 +304,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \
dtb-$(CONFIG_ARCH_LPC32XX) += \
lpc3250-ea3250.dtb \
lpc3250-phy3250.dtb
+dtb-$(CONFIG_ARCH_NPCM750) += \
+ nuvoton-npcm750-evb.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
new file mode 100644
index 000000000000..cabde3d5be8a
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+/dts-v1/;
+#include "nuvoton-npcm750.dtsi"
+
+/ {
+ model = "Nuvoton npcm750 Development Board (Device Tree)";
+ compatible = "nuvoton,npcm750";
+
+ chosen {
+ stdout-path = &serial3;
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+};
+
+&serial0 {
+ status = "okay";
+};
+
+&serial1 {
+ status = "okay";
+};
+
+&serial2 {
+ status = "okay";
+};
+
+&serial3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
new file mode 100644
index 000000000000..839e45cfd695
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright 2018 Google, Inc.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "nuvoton,npcm750-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk 10>;
+ clock-names = "clk_cpu";
+ reg = <0>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ clocks = <&clk 10>;
+ clock-names = "clk_cpu";
+ reg = <1>;
+ next-level-cache = <&l2>;
+ };
+ };
+
+ /* external clock signal rg1refck, supplied by the phy */
+ clk-rg1refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ /* external clock signal rg2refck, supplied by the phy */
+ clk-rg2refck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ clk-xin {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0x0 0xf0000000 0x00900000>;
+
+ gcr: gcr@800000 {
+ compatible = "nuvoton,npcm750-gcr", "syscon",
+ "simple-mfd";
+ reg = <0x800000 0x1000>;
+ };
+
+ scu: scu@3fe000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x3fe000 0x1000>;
+ };
+
+ l2: cache-controller@3fc000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x3fc000 0x1000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ clocks = <&clk 22>;
+ arm,shared-override;
+ };
+
+ gic: interrupt-controller@3ff000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x3ff000 0x1000>,
+ <0x3fe100 0x100>;
+ };
+
+ timer@3fe600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x3fe600 0x20>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&clk 15>;
+ };
+ };
+
+ ahb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ clk: clock-controller@f0801000 {
+ compatible = "nuvoton,npcm750-clk";
+ #clock-cells = <1>;
+ reg = <0xf0801000 0x1000>;
+ };
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges = <0x0 0xf0000000 0x00300000>;
+
+ timer0: timer@8000 {
+ compatible = "nuvoton,npcm750-timer";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x8000 0x1000>;
+ clocks = <&clk 15>;
+ };
+
+ serial0: serial@1000 {
+ compatible = "ns16550a";
+ reg = <0x1000 0x1000>;
+ clocks = <&clk 14>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial1: serial@2000 {
+ compatible = "ns16550a";
+ reg = <0x2000 0x1000>;
+ clocks = <&clk 14>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial2: serial@3000 {
+ compatible = "ns16550a";
+ reg = <0x3000 0x1000>;
+ clocks = <&clk 14>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ serial3: serial@4000 {
+ compatible = "ns16550a";
+ reg = <0x4000 0x1000>;
+ clocks = <&clk 14>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+ };
+ };
+};
--
2.16.1.291.g4437f3f132-goog


2018-02-16 18:42:24

by Brendan Higgins

[permalink] [raw]
Subject: [PATCH v11 3/3] MAINTAINERS: Add entry for the Nuvoton NPCM architecture

Add maintainers and reviewers for the Nuvoton NPCM architecture.

Signed-off-by: Brendan Higgins <[email protected]>
Reviewed-by: Tomer Maimon <[email protected]>
Reviewed-by: Avi Fishman <[email protected]>
---
MAINTAINERS | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3bdc260e36b7..02d1b0345298 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1700,6 +1700,20 @@ F: Documentation/devicetree/bindings/arm/ste-*
F: Documentation/devicetree/bindings/arm/ux500/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git

+ARM/NUVOTON NPCM ARCHITECTURE
+M: Avi Fishman <[email protected]>
+M: Tomer Maimon <[email protected]>
+R: Patrick Venture <[email protected]>
+R: Nancy Yuen <[email protected]>
+R: Brendan Higgins <[email protected]>
+L: [email protected] (moderated for non-subscribers)
+S: Supported
+F: arch/arm/mach-npcm/
+F: arch/arm/boot/dts/nuvoton-npcm*
+F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F: drivers/*/*npcm*
+F: Documentation/*/*npcm*
+
ARM/NUVOTON W90X900 ARM ARCHITECTURE
M: Wan ZongShun <[email protected]>
L: [email protected] (moderated for non-subscribers)
--
2.16.1.291.g4437f3f132-goog


2018-03-12 15:25:29

by Tomer Maimon

[permalink] [raw]
Subject: Re: [PATCH v11 2/3] arm: dts: add Nuvoton NPCM750 device tree

On 16 February 2018 at 04:40, Brendan Higgins <[email protected]> wrote:
> Add a common device tree for all Nuvoton NPCM750 BMCs and a board
> specific device tree for the NPCM750 (Poleg) evaluation board.
>
> Signed-off-by: Brendan Higgins <[email protected]>
> Reviewed-by: Tomer Maimon <[email protected]>
> Reviewed-by: Avi Fishman <[email protected]>
> Reviewed-by: Joel Stanley <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> Tested-by: Tomer Maimon <[email protected]>
> Tested-by: Avi Fishman <[email protected]>
> Tested-by: Joel Stanley <[email protected]>
> ---
> .../arm/cpu-enable-method/nuvoton,npcm750-smp | 42 +++++
> .../devicetree/bindings/arm/npcm/npcm.txt | 6 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/nuvoton-npcm750-evb.dts | 35 ++++
> arch/arm/boot/dts/nuvoton-npcm750.dtsi | 165 ++++++++++++++++++
> 5 files changed, 250 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
> create mode 100644 Documentation/devicetree/bindings/arm/npcm/npcm.txt
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> create mode 100644 arch/arm/boot/dts/nuvoton-npcm750.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
> new file mode 100644
> index 000000000000..8e043301e28e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
> @@ -0,0 +1,42 @@
Rob,

if will like to add new chip to enable the SMP (NPCM730).
what will be the best way to add it to the binding documentation file?

1. Do I need to add new binding file nuvoton,npcm730-smp?
2. Add nuvoton,npcm730-smp option to the current nuvoton,npcm750-smp file?
3. Modify the nuvoton,npcm750-smp binding name to nuvoton,npcm7xx-smp
and to describe both chips in it.


> +=========================================================
> +Secondary CPU enable-method "nuvoton,npcm750-smp" binding
> +=========================================================
> +
> +To apply to all CPUs, a single "nuvoton,npcm750-smp" enable method should be
> +defined in the "cpus" node.
> +
> +Enable method name: "nuvoton,npcm750-smp"
> +Compatible machines: "nuvoton,npcm750"
> +Compatible CPUs: "arm,cortex-a9"
> +Related properties: (none)
> +
> +Note:
> +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
> +"nuvoton,npcm750-gcr".
> +
> +Example:
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "nuvoton,npcm750-smp";
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <0>;
> + next-level-cache = <&L2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk NPCM7XX_CLK_CPU>;
> + clock-names = "clk_cpu";
> + reg = <1>;
> + next-level-cache = <&L2>;
> + };
> + };
> +
> diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.txt b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> new file mode 100644
> index 000000000000..2d87d9ecea85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/npcm/npcm.txt
> @@ -0,0 +1,6 @@
> +NPCM Platforms Device Tree Bindings
> +-----------------------------------
> +NPCM750 SoC
> +Required root node properties:
> + - compatible = "nuvoton,npcm750";
> +
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index ade7a38543dc..eeab5dac50ab 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -304,6 +304,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \
> dtb-$(CONFIG_ARCH_LPC32XX) += \
> lpc3250-ea3250.dtb \
> lpc3250-phy3250.dtb
> +dtb-$(CONFIG_ARCH_NPCM750) += \
> + nuvoton-npcm750-evb.dtb
> dtb-$(CONFIG_MACH_MESON6) += \
> meson6-atv1200.dtb
> dtb-$(CONFIG_MACH_MESON8) += \
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> new file mode 100644
> index 000000000000..cabde3d5be8a
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Nuvoton Technology corporation.
> +// Copyright 2018 Google, Inc.
> +
> +/dts-v1/;
> +#include "nuvoton-npcm750.dtsi"
> +
> +/ {
> + model = "Nuvoton npcm750 Development Board (Device Tree)";
> + compatible = "nuvoton,npcm750";
> +
> + chosen {
> + stdout-path = &serial3;
> + };
> +
> + memory {
> + reg = <0 0x40000000>;
> + };
> +};
> +
> +&serial0 {
> + status = "okay";
> +};
> +
> +&serial1 {
> + status = "okay";
> +};
> +
> +&serial2 {
> + status = "okay";
> +};
> +
> +&serial3 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> new file mode 100644
> index 000000000000..839e45cfd695
> --- /dev/null
> +++ b/arch/arm/boot/dts/nuvoton-npcm750.dtsi
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018 Nuvoton Technology corporation.
> +// Copyright 2018 Google, Inc.
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + interrupt-parent = <&gic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + enable-method = "nuvoton,npcm750-smp";
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk 10>;
> + clock-names = "clk_cpu";
> + reg = <0>;
> + next-level-cache = <&l2>;
> + };
> +
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a9";
> + clocks = <&clk 10>;
> + clock-names = "clk_cpu";
> + reg = <1>;
> + next-level-cache = <&l2>;
> + };
> + };
> +
> + /* external clock signal rg1refck, supplied by the phy */
> + clk-rg1refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + /* external clock signal rg2refck, supplied by the phy */
> + clk-rg2refck {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <125000000>;
> + };
> +
> + clk-xin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <50000000>;
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0x0 0xf0000000 0x00900000>;
> +
> + gcr: gcr@800000 {
> + compatible = "nuvoton,npcm750-gcr", "syscon",
> + "simple-mfd";
> + reg = <0x800000 0x1000>;
> + };
> +
> + scu: scu@3fe000 {
> + compatible = "arm,cortex-a9-scu";
> + reg = <0x3fe000 0x1000>;
> + };
> +
> + l2: cache-controller@3fc000 {
> + compatible = "arm,pl310-cache";
> + reg = <0x3fc000 0x1000>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> + cache-unified;
> + cache-level = <2>;
> + clocks = <&clk 22>;
> + arm,shared-override;
> + };
> +
> + gic: interrupt-controller@3ff000 {
> + compatible = "arm,cortex-a9-gic";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x3ff000 0x1000>,
> + <0x3fe100 0x100>;
> + };
> +
> + timer@3fe600 {
> + compatible = "arm,cortex-a9-twd-timer";
> + reg = <0x3fe600 0x20>;
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> + IRQ_TYPE_LEVEL_HIGH)>;
> + clocks = <&clk 15>;
> + };
> + };
> +
> + ahb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges;
> +
> + clk: clock-controller@f0801000 {
> + compatible = "nuvoton,npcm750-clk";
> + #clock-cells = <1>;
> + reg = <0xf0801000 0x1000>;
> + };
> +
> + apb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges = <0x0 0xf0000000 0x00300000>;
> +
> + timer0: timer@8000 {
> + compatible = "nuvoton,npcm750-timer";
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x8000 0x1000>;
> + clocks = <&clk 15>;
> + };
> +
> + serial0: serial@1000 {
> + compatible = "ns16550a";
> + reg = <0x1000 0x1000>;
> + clocks = <&clk 14>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + serial1: serial@2000 {
> + compatible = "ns16550a";
> + reg = <0x2000 0x1000>;
> + clocks = <&clk 14>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + serial2: serial@3000 {
> + compatible = "ns16550a";
> + reg = <0x3000 0x1000>;
> + clocks = <&clk 14>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + serial3: serial@4000 {
> + compatible = "ns16550a";
> + reg = <0x4000 0x1000>;
> + clocks = <&clk 14>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> + };
> + };
> +};
> --
> 2.16.1.291.g4437f3f132-goog
>

Thanks,

Tomer