Now GPIOD has support for both pdata systems and for non-standard DT
bindings the Arizona reset GPIO can be converted to use it.
Signed-off-by: Charles Keepax <[email protected]>
---
Changes since v3:
- Update header includes
Thanks,
Charles
drivers/mfd/arizona-core.c | 53 ++++++++++++++++++++++++++-------------
include/linux/mfd/arizona/pdata.h | 3 ++-
2 files changed, 37 insertions(+), 19 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 8d46e3ad9529..ad7d1a7c411c 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -13,13 +13,12 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -279,7 +278,7 @@ static int arizona_wait_for_boot(struct arizona *arizona)
static inline void arizona_enable_reset(struct arizona *arizona)
{
if (arizona->pdata.reset)
- gpio_set_value_cansleep(arizona->pdata.reset, 0);
+ gpiod_set_value_cansleep(arizona->pdata.reset, 0);
}
static void arizona_disable_reset(struct arizona *arizona)
@@ -295,7 +294,7 @@ static void arizona_disable_reset(struct arizona *arizona)
break;
}
- gpio_set_value_cansleep(arizona->pdata.reset, 1);
+ gpiod_set_value_cansleep(arizona->pdata.reset, 1);
usleep_range(1000, 5000);
}
}
@@ -804,14 +803,26 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
int ret, i;
int count = 0;
- pdata->reset = of_get_named_gpio(arizona->dev->of_node, "wlf,reset", 0);
- if (pdata->reset == -EPROBE_DEFER) {
- return pdata->reset;
- } else if (pdata->reset < 0) {
- dev_err(arizona->dev, "Reset GPIO missing/malformed: %d\n",
- pdata->reset);
+ pdata->reset = devm_gpiod_get_from_of_node(arizona->dev,
+ arizona->dev->of_node,
+ "wlf,reset", 0,
+ GPIOD_OUT_LOW,
+ "arizona /RESET");
+ if (IS_ERR(pdata->reset)) {
+ ret = PTR_ERR(pdata->reset);
+ switch (ret) {
+ case -ENOENT:
+ case -ENOSYS:
+ break;
+ case -EPROBE_DEFER:
+ return ret;
+ default:
+ dev_err(arizona->dev, "Reset GPIO malformed: %d\n",
+ ret);
+ break;
+ }
- pdata->reset = 0;
+ pdata->reset = NULL;
}
ret = of_property_read_u32_array(arizona->dev->of_node,
@@ -1113,14 +1124,20 @@ int arizona_dev_init(struct arizona *arizona)
goto err_early;
}
- if (arizona->pdata.reset) {
+ if (!arizona->pdata.reset) {
/* Start out with /RESET low to put the chip into reset */
- ret = devm_gpio_request_one(arizona->dev, arizona->pdata.reset,
- GPIOF_DIR_OUT | GPIOF_INIT_LOW,
- "arizona /RESET");
- if (ret != 0) {
- dev_err(dev, "Failed to request /RESET: %d\n", ret);
- goto err_dcvdd;
+ arizona->pdata.reset = devm_gpiod_get(arizona->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(arizona->pdata.reset)) {
+ ret = PTR_ERR(arizona->pdata.reset);
+ if (ret == -EPROBE_DEFER)
+ goto err_dcvdd;
+ else
+ dev_err(arizona->dev,
+ "Reset GPIO missing/malformed: %d\n",
+ ret);
+
+ arizona->pdata.reset = NULL;
}
}
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index bfeecf179895..fdba6f3a286a 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -56,6 +56,7 @@
#define ARIZONA_MAX_PDM_SPK 2
struct regulator_init_data;
+struct gpio_desc;
struct arizona_micbias {
int mV; /** Regulated voltage */
@@ -77,7 +78,7 @@ struct arizona_micd_range {
};
struct arizona_pdata {
- int reset; /** GPIO controlling /RESET, if any */
+ struct gpio_desc *reset; /** GPIO controlling /RESET, if any */
/** Regulator configuration for MICVDD */
struct arizona_micsupp_pdata micvdd;
--
2.11.0
Signed-off-by: Charles Keepax <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
No changes since v3.
Thanks,
Charles
Documentation/devicetree/bindings/mfd/arizona.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index b37bdde5cfda..5a378fcb398a 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -50,7 +50,7 @@ Required properties:
Optional properties:
- - wlf,reset : GPIO specifier for the GPIO controlling /RESET
+ - reset-gpios : GPIO specifier for the GPIO controlling /RESET
- clocks: Should reference the clocks supplied on MCLK1 and MCLK2
- clock-names: Should contains two strings:
@@ -109,6 +109,10 @@ Optional properties:
Documentation/devicetree/bindings/regulator/regulator.txt
(wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
+Deprecated properties:
+
+ - wlf,reset : GPIO specifier for the GPIO controlling /RESET
+
Also see child specific device properties:
Regulator - ../regulator/arizona-regulator.txt
Extcon - ../extcon/extcon-arizona.txt
--
2.11.0