This is the start of the stable review cycle for the 4.15.8 release.
There are 122 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.15.8-rc1
NeilBrown <[email protected]>
md: only allow remove_and_add_spares when no sync_thread running.
Nicholas Piggin <[email protected]>
powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID
Adam Ford <[email protected]>
ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux
Adam Ford <[email protected]>
ARM: dts: LogicPD SOM-LV: Fix I2C1 pinmux
Kai Heng Feng <[email protected]>
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
Eric Biggers <[email protected]>
KVM/x86: remove WARN_ON() for when vm_munmap() fails
Radim Krčmář <[email protected]>
KVM: x86: fix vcpu initialization with userspace lapic
Paolo Bonzini <[email protected]>
KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
Paolo Bonzini <[email protected]>
KVM: x86: move LAPIC initialization after VMCS creation
Paolo Bonzini <[email protected]>
KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
Wanpeng Li <[email protected]>
KVM: mmu: Fix overlap between public and private memslots
Wanpeng Li <[email protected]>
KVM: X86: Fix SMRAM accessing even if VM is shutdown
Arnd Bergmann <[email protected]>
ARM: kvm: fix building with gcc-8
Ulf Magnusson <[email protected]>
ARM: mvebu: Fix broken PL310_ERRATA_753970 selects
Daniel Schultz <[email protected]>
ARM: dts: rockchip: Remove 1.8 GHz operation point from phycore som
Arnd Bergmann <[email protected]>
ARM: orion: fix orion_ge00_switch_board_info initialization
Jan Beulich <[email protected]>
x86/mm: Fix {pmd,pud}_{set,clear}_flags()
Rasmus Villemoes <[email protected]>
nospec: Allow index argument to have const-qualified type
David Hildenbrand <[email protected]>
KVM: s390: consider epoch index on TOD clock syncs
David Hildenbrand <[email protected]>
KVM: s390: consider epoch index on hotplugged CPUs
David Hildenbrand <[email protected]>
KVM: s390: provide only a single function for setting the tod (fix SCK)
David Hildenbrand <[email protected]>
KVM: s390: take care of clock-comparator sign control
Anna Karbownik <[email protected]>
EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL
Mauro Carvalho Chehab <[email protected]>
media: m88ds3103: don't call a non-initalized function
Ming Lei <[email protected]>
blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch
Yuchung Cheng <[email protected]>
tcp: revert F-RTO extension to detect more spurious timeouts
Yuchung Cheng <[email protected]>
tcp: revert F-RTO middle-box workaround
Julian Wiedmann <[email protected]>
s390/qeth: fix IPA command submission race
Julian Wiedmann <[email protected]>
s390/qeth: fix IP address lookup for L3 devices
Julian Wiedmann <[email protected]>
Revert "s390/qeth: fix using of ref counter for rxip addresses"
Julian Wiedmann <[email protected]>
s390/qeth: fix double-free on IP add/remove race
Julian Wiedmann <[email protected]>
s390/qeth: fix IP removal on offline cards
Julian Wiedmann <[email protected]>
s390/qeth: fix overestimated count of buffer elements
Julian Wiedmann <[email protected]>
s390/qeth: fix SETIP command handling
Ursula Braun <[email protected]>
s390/qeth: fix underestimated count of buffer elements
James Chapman <[email protected]>
l2tp: fix tunnel lookup use-after-free race
James Chapman <[email protected]>
l2tp: fix race in pppol2tp_release with session object destroy
James Chapman <[email protected]>
l2tp: fix races with tunnel socket close
James Chapman <[email protected]>
l2tp: don't use inet_shutdown on ppp session destroy
James Chapman <[email protected]>
l2tp: don't use inet_shutdown on tunnel destroy
Song Liu <[email protected]>
tcp: tracepoint: only call trace_tcp_send_reset with full socket
Andrew Lunn <[email protected]>
net: phy: Restore phy_resume() locking assumption
Vlad Buslov <[email protected]>
net/mlx5: Fix error handling when adding flow rules
Rahul Lakkireddy <[email protected]>
cxgb4: fix trailing zero in CIM LA dump
Jason Wang <[email protected]>
virtio-net: disable NAPI only when enabled during XDP set
Jason Wang <[email protected]>
tuntap: disable preemption during XDP processing
Jason Wang <[email protected]>
tuntap: correctly add the missing XDP flush
Soheil Hassas Yeganeh <[email protected]>
tcp: purge write queue upon RST
Jason A. Donenfeld <[email protected]>
netlink: put module reference if dump start fails
Ido Schimmel <[email protected]>
mlxsw: spectrum_router: Do not unconditionally clear route offload indication
Paolo Abeni <[email protected]>
cls_u32: fix use after free in u32_destroy_key()
Tom Lendacky <[email protected]>
amd-xgbe: Restore PCI interrupt enablement setting on resume
Boris Pismenny <[email protected]>
tls: Use correct sk->sk_prot for IPV6
Eran Ben Elisha <[email protected]>
net/mlx5e: Verify inline header size do not exceed SKB linear size
Ido Schimmel <[email protected]>
bridge: Fix VLAN reference count problem
Alexey Kodanev <[email protected]>
sctp: fix dst refcnt leak in sctp_v6_get_dst()
David Ahern <[email protected]>
net: ipv4: Set addr_type in hash_keys for forwarded case
Jiri Pirko <[email protected]>
mlxsw: spectrum_router: Fix error path in mlxsw_sp_vr_create
Xin Long <[email protected]>
sctp: do not pr_err for the duplicated node in transport rhlist
Ivan Vecera <[email protected]>
net/sched: cls_u32: fix cls_u32 on filter replace
Eric Dumazet <[email protected]>
net_sched: gen_estimator: fix broken estimators based on percpu stats
Inbar Karmy <[email protected]>
net/mlx5e: Fix loopback self test when GRO is off
Tonghao Zhang <[email protected]>
doc: Change the min default value of tcp_wmem/tcp_rmem.
Eric Dumazet <[email protected]>
tcp_bbr: better deal with suboptimal GSO
David Howells <[email protected]>
rxrpc: Fix send in rxrpc_send_data_packet()
Ilya Lesokhin <[email protected]>
tcp: Honor the eor bit in tcp_mtu_probe
Heiner Kallweit <[email protected]>
net: phy: fix phy_start to consider PHY_IGNORE_INTERRUPT
Gal Pressman <[email protected]>
net/mlx5e: Specify numa node when allocating drop rq
Shalom Toledo <[email protected]>
mlxsw: spectrum_switchdev: Check success of FDB add operation
Tommi Rantala <[email protected]>
sctp: fix dst refcnt leak in sctp_v4_get_dst
Gal Pressman <[email protected]>
net/mlx5e: Fix TCP checksum in LRO buffers
Alexey Kodanev <[email protected]>
udplite: fix partial checksum initialization
Alexey Kodanev <[email protected]>
sctp: verify size of a new chunk in _sctp_make_chunk()
Guillaume Nault <[email protected]>
ppp: prevent unregistered channels from connecting to PPP units
Roman Kapl <[email protected]>
net: sched: report if filter is too large to dump
Nicolas Dichtel <[email protected]>
netlink: ensure to loop over all netns in genlmsg_multicast_allns()
Sabrina Dubroca <[email protected]>
net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
Jakub Kicinski <[email protected]>
net: fix race on decreasing number of TX queues
Grygorii Strashko <[email protected]>
net: ethernet: ti: cpsw: fix net watchdog timeout
Wolfram Sang <[email protected]>
net: amd-xgbe: fix comparison to bitshift when dealing with a mask
Arnd Bergmann <[email protected]>
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
Denis Du <[email protected]>
hdlc_ppp: carrier detect ok, don't turn off negotiation
Stefano Brivio <[email protected]>
fib_semantics: Don't match route with mismatching tclassid
Xin Long <[email protected]>
bridge: check brport attr show in brport_show
Thomas Gleixner <[email protected]>
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
Sebastian Panceac <[email protected]>
x86/platform/intel-mid: Handle Intel Edison reboot correctly
Juergen Gross <[email protected]>
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
Jan Kara <[email protected]>
direct-io: Fix sleep in atomic due to sync AIO
Dan Williams <[email protected]>
dax: fix vma_is_fsdax() helper
Viresh Kumar <[email protected]>
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()
Dan Williams <[email protected]>
vfio: disable filesystem-dax page pinning
Ming Lei <[email protected]>
block: pass inclusive 'lend' parameter to truncate_inode_pages_range
Ming Lei <[email protected]>
block: kyber: fix domain token leak during requeue
Jiufei Xue <[email protected]>
block: fix the count of PGPGOUT for WRITE_SAME
Anand Jain <[email protected]>
btrfs: use proper endianness accessors for super_copy
Helge Deller <[email protected]>
parisc: Hide virtual kernel memory layout
John David Anglin <[email protected]>
parisc: Fix ordering of cache and TLB flushes
Helge Deller <[email protected]>
parisc: Reduce irq overhead when run in qemu
Helge Deller <[email protected]>
parisc: Use cr16 interval timers unconditionally on qemu
Lingutla Chandrasekhar <[email protected]>
timers: Forward timer base before migrating timers
Shawn Lin <[email protected]>
mmc: dw_mmc: Fix out-of-bounds access for slot's caps
Shawn Lin <[email protected]>
mmc: dw_mmc: Factor out dw_mci_init_slot_caps
Shawn Lin <[email protected]>
mmc: dw_mmc: Avoid accessing registers in runtime suspended state
Geert Uytterhoeven <[email protected]>
mmc: dw_mmc-k3: Fix out-of-bounds access through DT alias
Adrian Hunter <[email protected]>
mmc: sdhci-pci: Fix S0i3 for Intel BYT-based controllers
Takashi Iwai <[email protected]>
ALSA: hda - Fix pincfg at resume on Lenovo T470 dock
Hans de Goede <[email protected]>
ALSA: hda: Add a power_save blacklist
Takashi Iwai <[email protected]>
ALSA: x86: Fix missing spinlock and mutex initializations
Richard Fitzgerald <[email protected]>
ALSA: control: Fix memory corruption risk in snd_ctl_elem_read
Erik Veijola <[email protected]>
ALSA: usb-audio: Add a quirck for B&W PX headphones
Jeremy Boone <[email protected]>
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus
Jeremy Boone <[email protected]>
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus
Jeremy Boone <[email protected]>
tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus
Jeremy Boone <[email protected]>
tpm: fix potential buffer overruns caused by bit glitches on the bus
Jeremy Boone <[email protected]>
tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus
Emil Tantilov <[email protected]>
ixgbe: fix crash in build_skb Rx code path
Hans de Goede <[email protected]>
Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking
Sam Bobroff <[email protected]>
powerpc/pseries: Enable RAS hotplug events later
Mario Limonciello <[email protected]>
platform/x86: dell-laptop: Allocate buffer on heap rather than globally
Corey Minyard <[email protected]>
ipmi_si: Fix error handling of platform device
Anna-Maria Gleixner <[email protected]>
hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)
Adam Borowski <[email protected]>
vsprintf: avoid misleading "(null)" for %px
-------------
Diffstat:
Documentation/networking/ip-sysctl.txt | 4 +-
Makefile | 4 +-
arch/arm/boot/dts/logicpd-som-lv.dtsi | 9 +-
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 +
arch/arm/boot/dts/rk3288-phycore-som.dtsi | 20 ---
arch/arm/kvm/hyp/Makefile | 5 +
arch/arm/kvm/hyp/banked-sr.c | 4 +
arch/arm/mach-mvebu/Kconfig | 4 +-
arch/arm/plat-orion/common.c | 23 ++-
arch/parisc/include/asm/cacheflush.h | 1 +
arch/parisc/include/asm/processor.h | 2 +
arch/parisc/kernel/cache.c | 57 ++++---
arch/parisc/kernel/pacache.S | 22 +++
arch/parisc/kernel/time.c | 11 +-
arch/parisc/mm/init.c | 7 +-
arch/powerpc/mm/pgtable-radix.c | 20 +++
arch/powerpc/platforms/pseries/ras.c | 31 +++-
arch/s390/kvm/interrupt.c | 25 ++-
arch/s390/kvm/kvm-s390.c | 79 +++++----
arch/s390/kvm/kvm-s390.h | 5 +-
arch/s390/kvm/priv.c | 9 +-
arch/x86/include/asm/pgtable.h | 8 +-
arch/x86/include/asm/pgtable_32.h | 1 +
arch/x86/include/asm/pgtable_64.h | 1 +
arch/x86/include/asm/pgtable_types.h | 10 ++
arch/x86/kernel/setup.c | 17 +-
arch/x86/kernel/setup_percpu.c | 17 +-
arch/x86/kvm/lapic.c | 11 +-
arch/x86/kvm/mmu.c | 2 +-
arch/x86/kvm/svm.c | 9 +-
arch/x86/kvm/vmx.c | 9 +-
arch/x86/kvm/x86.c | 8 +-
arch/x86/mm/cpu_entry_area.c | 6 +
arch/x86/mm/init_32.c | 15 ++
arch/x86/platform/intel-mid/intel-mid.c | 2 +-
arch/x86/xen/suspend.c | 16 ++
block/blk-core.c | 2 +-
block/blk-mq.c | 4 +-
block/ioctl.c | 2 +-
block/kyber-iosched.c | 1 +
drivers/acpi/bus.c | 38 ++++-
drivers/bluetooth/btusb.c | 25 ++-
drivers/char/ipmi/ipmi_si_intf.c | 9 +-
drivers/char/tpm/st33zp24/st33zp24.c | 4 +-
drivers/char/tpm/tpm-interface.c | 4 +
drivers/char/tpm/tpm2-cmd.c | 4 +
drivers/char/tpm/tpm_i2c_infineon.c | 5 +-
drivers/char/tpm/tpm_i2c_nuvoton.c | 8 +-
drivers/char/tpm/tpm_tis_core.c | 5 +-
drivers/cpufreq/s3c24xx-cpufreq.c | 8 +-
drivers/edac/sb_edac.c | 2 +-
drivers/md/md.c | 4 +
drivers/media/dvb-frontends/m88ds3103.c | 7 +-
drivers/mmc/host/dw_mmc-exynos.c | 1 +
drivers/mmc/host/dw_mmc-k3.c | 4 +
drivers/mmc/host/dw_mmc-rockchip.c | 1 +
drivers/mmc/host/dw_mmc-zx.c | 1 +
drivers/mmc/host/dw_mmc.c | 84 +++++----
drivers/mmc/host/dw_mmc.h | 2 +
drivers/mmc/host/sdhci-pci-core.c | 35 +++-
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +-
drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 2 +
drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c | 2 +-
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 +
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 +-
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 49 ++++--
.../net/ethernet/mellanox/mlx5/core/en_selftest.c | 3 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 +-
.../net/ethernet/mellanox/mlxsw/spectrum_router.c | 35 ++--
.../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 29 +++-
drivers/net/ethernet/ti/cpsw.c | 16 +-
drivers/net/phy/phy.c | 4 +-
drivers/net/phy/phy_device.c | 18 +-
drivers/net/ppp/ppp_generic.c | 9 +
drivers/net/tun.c | 7 +
drivers/net/virtio_net.c | 8 +-
drivers/net/wan/hdlc_ppp.c | 5 +-
drivers/platform/x86/dell-laptop.c | 188 +++++++++++----------
drivers/s390/net/qeth_core.h | 7 +-
drivers/s390/net/qeth_core_main.c | 43 ++---
drivers/s390/net/qeth_l3.h | 34 +++-
drivers/s390/net/qeth_l3_main.c | 123 ++++++--------
drivers/vfio/vfio_iommu_type1.c | 18 +-
fs/btrfs/sysfs.c | 8 +-
fs/btrfs/transaction.c | 20 ++-
fs/direct-io.c | 3 +-
include/linux/fs.h | 2 +-
include/linux/nospec.h | 3 +-
include/linux/phy.h | 1 +
include/net/udplite.h | 1 +
kernel/time/hrtimer.c | 7 +-
kernel/time/timer.c | 6 +
lib/vsprintf.c | 2 +-
net/bridge/br_sysfs_if.c | 3 +
net/bridge/br_vlan.c | 2 +
net/core/dev.c | 11 +-
net/core/gen_estimator.c | 1 +
net/ipv4/fib_semantics.c | 5 +
net/ipv4/route.c | 10 +-
net/ipv4/tcp_input.c | 24 +--
net/ipv4/tcp_ipv4.c | 3 +-
net/ipv4/tcp_output.c | 34 +++-
net/ipv4/udp.c | 5 +
net/ipv6/ip6_checksum.c | 5 +
net/ipv6/sit.c | 2 +-
net/ipv6/tcp_ipv6.c | 3 +-
net/l2tp/l2tp_core.c | 142 +++++-----------
net/l2tp/l2tp_core.h | 23 +--
net/l2tp/l2tp_ip.c | 10 +-
net/l2tp/l2tp_ip6.c | 8 +-
net/l2tp/l2tp_ppp.c | 60 +++----
net/netlink/af_netlink.c | 4 +-
net/netlink/genetlink.c | 12 +-
net/rxrpc/output.c | 2 +-
net/sched/cls_api.c | 7 +-
net/sched/cls_u32.c | 24 +--
net/sctp/input.c | 5 +-
net/sctp/ipv6.c | 10 +-
net/sctp/protocol.c | 10 +-
net/sctp/sm_make_chunk.c | 7 +-
net/tls/tls_main.c | 52 ++++--
sound/core/control.c | 2 +-
sound/pci/hda/hda_intel.c | 38 ++++-
sound/pci/hda/patch_realtek.c | 3 +-
sound/usb/quirks-table.h | 47 ++++++
sound/x86/intel_hdmi_audio.c | 2 +
virt/kvm/kvm_main.c | 3 +-
129 files changed, 1271 insertions(+), 737 deletions(-)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corey Minyard <[email protected]>
commit 174134ac760275457bb0d1560a0dbe6cf8a12ad6 upstream.
Cleanup of platform devices created by the IPMI driver was not
being done correctly and could result in a memory leak. So
create a local boolean to know how to clean up those platform
devices.
Reported-by: David Binderman <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_si_intf.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2045,6 +2045,7 @@ static int try_smi_init(struct smi_info
int rv = 0;
int i;
char *init_name = NULL;
+ bool platform_device_registered = false;
pr_info(PFX "Trying %s-specified %s state machine at %s address 0x%lx, slave address 0x%x, irq %d\n",
ipmi_addr_src_to_str(new_smi->io.addr_source),
@@ -2173,6 +2174,7 @@ static int try_smi_init(struct smi_info
rv);
goto out_err;
}
+ platform_device_registered = true;
}
dev_set_drvdata(new_smi->io.dev, new_smi);
@@ -2279,10 +2281,11 @@ out_err:
}
if (new_smi->pdev) {
- platform_device_unregister(new_smi->pdev);
+ if (platform_device_registered)
+ platform_device_unregister(new_smi->pdev);
+ else
+ platform_device_put(new_smi->pdev);
new_smi->pdev = NULL;
- } else if (new_smi->pdev) {
- platform_device_put(new_smi->pdev);
}
kfree(init_name);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit 636a415bcc7f4fd020ece8fd5fc648c4cef19c34 upstream.
When run under QEMU, calling mfctl(16) creates some overhead because the
qemu timer has to be scaled and moved into the register. This patch
reduces the number of calls to mfctl(16) by moving the calls out of the
loops.
Additionally, increase the minimal time interval to 8000 cycles instead
of 500 to compensate possible QEMU delays when delivering interrupts.
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # 4.14+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/kernel/time.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -76,10 +76,10 @@ irqreturn_t __irq_entry timer_interrupt(
next_tick = cpuinfo->it_value;
/* Calculate how many ticks have elapsed. */
+ now = mfctl(16);
do {
++ticks_elapsed;
next_tick += cpt;
- now = mfctl(16);
} while (next_tick - now > cpt);
/* Store (in CR16 cycles) up to when we are accounting right now. */
@@ -103,16 +103,17 @@ irqreturn_t __irq_entry timer_interrupt(
* if one or the other wrapped. If "now" is "bigger" we'll end up
* with a very large unsigned number.
*/
- while (next_tick - mfctl(16) > cpt)
+ now = mfctl(16);
+ while (next_tick - now > cpt)
next_tick += cpt;
/* Program the IT when to deliver the next interrupt.
* Only bottom 32-bits of next_tick are writable in CR16!
* Timer interrupt will be delivered at least a few hundred cycles
- * after the IT fires, so if we are too close (<= 500 cycles) to the
+ * after the IT fires, so if we are too close (<= 8000 cycles) to the
* next cycle, simply skip it.
*/
- if (next_tick - mfctl(16) <= 500)
+ if (next_tick - now <= 8000)
next_tick += cpt;
mtctl(next_tick, 16);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuchung Cheng <[email protected]>
[ Upstream commit fc68e171d376c322e6777a3d7ac2f0278b68b17f ]
This reverts commit 89fe18e44f7ee5ab1c90d0dff5835acee7751427.
While the patch could detect more spurious timeouts, it could cause
poor TCP performance on broken middle-boxes that modifies TCP packets
(e.g. receive window, SACK options). Since the performance gain is
much smaller compared to the potential loss. The best solution is
to fully revert the change.
Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts")
Reported-by: Teodor Milkov <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_input.c | 30 ++++++++++++------------------
1 file changed, 12 insertions(+), 18 deletions(-)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1915,6 +1915,7 @@ void tcp_enter_loss(struct sock *sk)
struct tcp_sock *tp = tcp_sk(sk);
struct net *net = sock_net(sk);
struct sk_buff *skb;
+ bool new_recovery = icsk->icsk_ca_state < TCP_CA_Recovery;
bool is_reneg; /* is receiver reneging on SACKs? */
bool mark_lost;
@@ -1973,15 +1974,12 @@ void tcp_enter_loss(struct sock *sk)
tp->high_seq = tp->snd_nxt;
tcp_ecn_queue_cwr(tp);
- /* F-RTO RFC5682 sec 3.1 step 1 mandates to disable F-RTO
- * if a previous recovery is underway, otherwise it may incorrectly
- * call a timeout spurious if some previously retransmitted packets
- * are s/acked (sec 3.2). We do not apply that retriction since
- * retransmitted skbs are permanently tagged with TCPCB_EVER_RETRANS
- * so FLAG_ORIG_SACK_ACKED is always correct. But we do disable F-RTO
- * on PTMU discovery to avoid sending new data.
+ /* F-RTO RFC5682 sec 3.1 step 1: retransmit SND.UNA if no previous
+ * loss recovery is underway except recurring timeout(s) on
+ * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
*/
tp->frto = net->ipv4.sysctl_tcp_frto &&
+ (new_recovery || icsk->icsk_retransmits) &&
!inet_csk(sk)->icsk_mtup.probe_size;
}
@@ -2634,18 +2632,14 @@ static void tcp_process_loss(struct sock
tcp_try_undo_loss(sk, false))
return;
- /* The ACK (s)acks some never-retransmitted data meaning not all
- * the data packets before the timeout were lost. Therefore we
- * undo the congestion window and state. This is essentially
- * the operation in F-RTO (RFC5682 section 3.1 step 3.b). Since
- * a retransmitted skb is permantly marked, we can apply such an
- * operation even if F-RTO was not used.
- */
- if ((flag & FLAG_ORIG_SACK_ACKED) &&
- tcp_try_undo_loss(sk, tp->undo_marker))
- return;
-
if (tp->frto) { /* F-RTO RFC5682 sec 3.1 (sack enhanced version). */
+ /* Step 3.b. A timeout is spurious if not all data are
+ * lost, i.e., never-retransmitted data are (s)acked.
+ */
+ if ((flag & FLAG_ORIG_SACK_ACKED) &&
+ tcp_try_undo_loss(sk, true))
+ return;
+
if (after(tp->snd_nxt, tp->high_seq)) {
if (flag & FLAG_DATA_SACKED || is_dupack)
tp->frto = 0; /* Step 3.a. loss was real */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit 1575767ef3cf5326701d2ae3075b7732cbc855e4 upstream.
For now, we don't take care of over/underflows. Especially underflows
are critical:
Assume the epoch is currently 0 and we get a sync request for delta=1,
meaning the TOD is moved forward by 1 and we have to fix it up by
subtracting 1 from the epoch. Right now, this will leave the epoch
index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong.
We have to take care of over and underflows, also for the VSIE case. So
let's factor out calculation into a separate function.
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: [email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
[use u8 for idx]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 32 +++++++++++++++++++++++++++++---
1 file changed, 29 insertions(+), 3 deletions(-)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -166,6 +166,28 @@ int kvm_arch_hardware_enable(void)
static void kvm_gmap_notifier(struct gmap *gmap, unsigned long start,
unsigned long end);
+static void kvm_clock_sync_scb(struct kvm_s390_sie_block *scb, u64 delta)
+{
+ u8 delta_idx = 0;
+
+ /*
+ * The TOD jumps by delta, we have to compensate this by adding
+ * -delta to the epoch.
+ */
+ delta = -delta;
+
+ /* sign-extension - we're adding to signed values below */
+ if ((s64)delta < 0)
+ delta_idx = -1;
+
+ scb->epoch += delta;
+ if (scb->ecd & ECD_MEF) {
+ scb->epdx += delta_idx;
+ if (scb->epoch < delta)
+ scb->epdx += 1;
+ }
+}
+
/*
* This callback is executed during stop_machine(). All CPUs are therefore
* temporarily stopped. In order not to change guest behavior, we have to
@@ -181,13 +203,17 @@ static int kvm_clock_sync(struct notifie
unsigned long long *delta = v;
list_for_each_entry(kvm, &vm_list, vm_list) {
- kvm->arch.epoch -= *delta;
kvm_for_each_vcpu(i, vcpu, kvm) {
- vcpu->arch.sie_block->epoch -= *delta;
+ kvm_clock_sync_scb(vcpu->arch.sie_block, *delta);
+ if (i == 0) {
+ kvm->arch.epoch = vcpu->arch.sie_block->epoch;
+ kvm->arch.epdx = vcpu->arch.sie_block->epdx;
+ }
if (vcpu->arch.cputm_enabled)
vcpu->arch.cputm_start += *delta;
if (vcpu->arch.vsie_block)
- vcpu->arch.vsie_block->epoch -= *delta;
+ kvm_clock_sync_scb(vcpu->arch.vsie_block,
+ *delta);
}
}
return NOTIFY_OK;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 4964c66fd49b2e2342da35358f2ff74614bcbaee ]
This reverts commit cb816192d986f7596009dedcf2201fe2e5bc2aa7.
The issue this attempted to fix never actually occurs.
l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address
was previously added to the card. If so, it returns -EEXIST and doesn't
call l3_add_ip().
As a result, the "address exists" path in l3_add_ip() is never taken
for rxip addresses, and this patch had no effect.
Fixes: cb816192d986 ("s390/qeth: fix using of ref counter for rxip addresses")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_l3_main.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -250,8 +250,7 @@ int qeth_l3_delete_ip(struct qeth_card *
return -ENOENT;
addr->ref_counter--;
- if (addr->ref_counter > 0 && (addr->type == QETH_IP_TYPE_NORMAL ||
- addr->type == QETH_IP_TYPE_RXIP))
+ if (addr->type == QETH_IP_TYPE_NORMAL && addr->ref_counter > 0)
return rc;
if (addr->in_progress)
return -EINPROGRESS;
@@ -329,9 +328,8 @@ int qeth_l3_add_ip(struct qeth_card *car
kfree(addr);
}
} else {
- if (addr->type == QETH_IP_TYPE_NORMAL ||
- addr->type == QETH_IP_TYPE_RXIP)
- addr->ref_counter++;
+ if (addr->type == QETH_IP_TYPE_NORMAL)
+ addr->ref_counter++;
}
return rc;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Bonzini <[email protected]>
commit 0b2e9904c15963e715d33e5f3f1387f17d19333a upstream.
The initial reset of the local APIC is performed before the VMCS has been
created, but it tries to do a vmwrite:
vmwrite error: reg 810 value 4a00 (err 18944)
CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1
Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014
Call Trace:
vmx_set_rvi [kvm_intel]
vmx_hwapic_irr_update [kvm_intel]
kvm_lapic_reset [kvm]
kvm_create_lapic [kvm]
kvm_arch_vcpu_init [kvm]
kvm_vcpu_init [kvm]
vmx_create_vcpu [kvm_intel]
kvm_vm_ioctl [kvm]
Move it later, after the VMCS has been created.
Fixes: 4191db26b714 ("KVM: x86: Update APICv on APIC reset")
Cc: [email protected]
Cc: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/lapic.c | 1 -
arch/x86/kvm/x86.c | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -2156,7 +2156,6 @@ int kvm_create_lapic(struct kvm_vcpu *vc
*/
vcpu->arch.apic_base = MSR_IA32_APICBASE_ENABLE;
static_key_slow_inc(&apic_sw_disabled.key); /* sw disabled at reset */
- kvm_lapic_reset(vcpu, false);
kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
return 0;
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7793,6 +7793,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu
if (r)
return r;
kvm_vcpu_reset(vcpu, false);
+ kvm_lapic_reset(vcpu, false);
kvm_mmu_setup(vcpu);
vcpu_put(vcpu);
return r;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 67870eb1204223598ea6d8a4467b482e9f5875b5 upstream.
In banked-sr.c, we use a top-level '__asm__(".arch_extension virt")'
statement to allow compilation of a multi-CPU kernel for ARMv6
and older ARMv7-A that don't normally support access to the banked
registers.
This is considered to be a programming error by the gcc developers
and will no longer work in gcc-8, where we now get a build error:
/tmp/cc4Qy7GR.s:34: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_usr'
/tmp/cc4Qy7GR.s:41: Error: Banked registers are not available with this architecture. -- `mrs r3,ELR_hyp'
/tmp/cc4Qy7GR.s:55: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_svc'
/tmp/cc4Qy7GR.s:62: Error: Banked registers are not available with this architecture. -- `mrs r3,LR_svc'
/tmp/cc4Qy7GR.s:69: Error: Banked registers are not available with this architecture. -- `mrs r3,SPSR_svc'
/tmp/cc4Qy7GR.s:76: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_abt'
Passign the '-march-armv7ve' flag to gcc works, and is ok here, because
we know the functions won't ever be called on pre-ARMv7VE machines.
Unfortunately, older compiler versions (4.8 and earlier) do not understand
that flag, so we still need to keep the asm around.
Backporting to stable kernels (4.6+) is needed to allow those to be built
with future compilers as well.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84129
Fixes: 33280b4cd1dc ("ARM: KVM: Add banked registers save/restore")
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Christoffer Dall <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kvm/hyp/Makefile | 5 +++++
arch/arm/kvm/hyp/banked-sr.c | 4 ++++
2 files changed, 9 insertions(+)
--- a/arch/arm/kvm/hyp/Makefile
+++ b/arch/arm/kvm/hyp/Makefile
@@ -7,6 +7,8 @@ ccflags-y += -fno-stack-protector -DDISA
KVM=../../../../virt/kvm
+CFLAGS_ARMV7VE :=$(call cc-option, -march=armv7ve)
+
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o
obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
@@ -15,7 +17,10 @@ obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+CFLAGS_banked-sr.o += $(CFLAGS_ARMV7VE)
+
obj-$(CONFIG_KVM_ARM_HOST) += entry.o
obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+CFLAGS_switch.o += $(CFLAGS_ARMV7VE)
obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o
--- a/arch/arm/kvm/hyp/banked-sr.c
+++ b/arch/arm/kvm/hyp/banked-sr.c
@@ -20,6 +20,10 @@
#include <asm/kvm_hyp.h>
+/*
+ * gcc before 4.9 doesn't understand -march=armv7ve, so we have to
+ * trick the assembler.
+ */
__asm__(".arch_extension virt");
void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Ford <[email protected]>
commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream.
The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1. The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at time.
This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz
Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo
DM3730 devkit")
Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -104,6 +104,8 @@
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
@@ -211,6 +213,12 @@
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
};
&uart2 {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 39772f0a7be3b3dc26c74ea13fe7847fd1522c8b upstream.
The locking protocols in md assume that a device will
never be removed from an array during resync/recovery/reshape.
When that isn't happening, rcu or reconfig_mutex is needed
to protect an rdev pointer while taking a refcount. When
it is happening, that protection isn't needed.
Unfortunately there are cases were remove_and_add_spares() is
called when recovery might be happening: is state_store(),
slot_store() and hot_remove_disk().
In each case, this is just an optimization, to try to expedite
removal from the personality so the device can be removed from
the array. If resync etc is happening, we just have to wait
for md_check_recover to find a suitable time to call
remove_and_add_spares().
This optimization and not essential so it doesn't
matter if it fails.
So change remove_and_add_spares() to abort early if
resync/recovery/reshape is happening, unless it is called
from md_check_recovery() as part of a newly started recovery.
The parameter "this" is only NULL when called from
md_check_recovery() so when it is NULL, there is no need to abort.
As this can result in a NULL dereference, the fix is suitable
for -stable.
cc: yuyufen <[email protected]>
Cc: Tomasz Majchrzak <[email protected]>
Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.")
Cc: [email protected] (v4.8+)
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/md.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -8554,6 +8554,10 @@ static int remove_and_add_spares(struct
int removed = 0;
bool remove_some = false;
+ if (this && test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ /* Mustn't remove devices when resync thread is running */
+ return 0;
+
rdev_for_each(rdev, mddev) {
if ((this == NULL || rdev == this) &&
rdev->raid_disk >= 0 &&
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Piggin <[email protected]>
commit eeb715c3e995fbdda0cc05e61216c6c5609bce66 upstream.
This change restores and formalises the behaviour that access to NULL
or other user addresses by the kernel during boot should fault rather
than succeed and modify memory. This was inadvertently broken when
fixing another bug, because it was previously not well defined and
only worked by chance.
powerpc/64s/radix uses high address bits to select an address space
"quadrant", which determines which PID and LPID are used to translate
the rest of the address (effective PID, effective LPID). The kernel
mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So
the kernel page tables are installed in the PID 0 process table entry.
An address at 0x0... selects quadrant 0, which uses PID=PIDR for
translating the rest of the address (that is, it uses the value of the
PIDR register as the effective PID). If PIDR=0, then the translation
is performed with the PID 0 process table entry page tables. This is
the kernel mapping, so we effectively get another copy of the kernel
address space at 0. A NULL pointer access will access physical memory
address 0.
To prevent duplicating the kernel address space in quadrant 0, this
patch allocates a guard PID containing no translations, and
initializes PIDR with this during boot, before the MMU is switched on.
Any kernel access to quadrant 0 will use this guard PID for
translation and find no valid mappings, and therefore fault.
After boot, this PID will be switchd away to user context PIDs, but
those contain user mappings (and usually NULL pointer protection)
rather than kernel mapping, which is much safer (and by design). It
may be in future this is tightened further, which the guard PID could
be used for.
Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before
setting partition table"), introduced this problem because it zeroes
PIDR at boot. However previously the value was inherited from firmware
or kexec, which is not robust and can be zero (e.g., mambo).
Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table")
Cc: [email protected] # v4.15+
Reported-by: Florian Weimer <[email protected]>
Tested-by: Mauricio Faria de Oliveira <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
[mauricfo: backport to v4.15.7 (context line updates only) and re-test]
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Acked-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/mm/pgtable-radix.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -21,6 +21,7 @@
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/mmu.h>
@@ -334,6 +335,22 @@ static void __init radix_init_pgtable(vo
"r" (TLBIEL_INVAL_SET_LPID), "r" (0));
asm volatile("eieio; tlbsync; ptesync" : : : "memory");
trace_tlbie(0, 0, TLBIEL_INVAL_SET_LPID, 0, 2, 1, 1);
+
+ /*
+ * The init_mm context is given the first available (non-zero) PID,
+ * which is the "guard PID" and contains no page table. PIDR should
+ * never be set to zero because that duplicates the kernel address
+ * space at the 0x0... offset (quadrant 0)!
+ *
+ * An arbitrary PID that may later be allocated by the PID allocator
+ * for userspace processes must not be used either, because that
+ * would cause stale user mappings for that PID on CPUs outside of
+ * the TLB invalidation scheme (because it won't be in mm_cpumask).
+ *
+ * So permanently carve out one PID for the purpose of a guard PID.
+ */
+ init_mm.context.id = mmu_base_pid;
+ mmu_base_pid++;
}
static void __init radix_init_partition_table(void)
@@ -580,6 +597,8 @@ void __init radix__early_init_mmu(void)
radix_init_iamr();
radix_init_pgtable();
+ /* Switch to the guard PID before turning on MMU */
+ radix__switch_mmu_context(NULL, &init_mm);
}
void radix__early_init_mmu_secondary(void)
@@ -601,6 +620,7 @@ void radix__early_init_mmu_secondary(voi
radix_init_amor();
}
radix_init_iamr();
+ radix__switch_mmu_context(NULL, &init_mm);
}
void radix__mmu_cleanup_all(void)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Ford <[email protected]>
commit 84c7efd607e7fb6933920322086db64654f669b2 upstream.
The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1. The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at times.
This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730
SOM-LV")
Signed-off-by: Adam Ford <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/logicpd-som-lv.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -98,6 +98,8 @@
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <2600000>;
twl: twl@48 {
@@ -216,7 +218,12 @@
>;
};
-
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
};
&omap3_pmx_wkup {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Schultz <[email protected]>
commit 5ce0bad4ccd04c8a989e94d3c89e4e796ac22e48 upstream.
Rockchip recommends to run the CPU cores only with operations points of
1.6 GHz or lower.
Removed the cpu0 node with too high operation points and use the default
values instead.
Fixes: 903d31e34628 ("ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM")
Cc: [email protected]
Signed-off-by: Daniel Schultz <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/rk3288-phycore-som.dtsi | 20 --------------------
1 file changed, 20 deletions(-)
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -110,26 +110,6 @@
};
};
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
- operating-points = <
- /* KHz uV */
- 1800000 1400000
- 1608000 1350000
- 1512000 1300000
- 1416000 1200000
- 1200000 1100000
- 1008000 1050000
- 816000 1000000
- 696000 950000
- 600000 900000
- 408000 900000
- 312000 900000
- 216000 900000
- 126000 900000
- >;
-};
-
&emmc {
status = "okay";
bus-width = <8>;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai Heng Feng <[email protected]>
commit 36904703aeeeb6cd31993f1353c8325006229f9a upstream.
The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out
of box.
The touchpad relies on its _INI method to update its _HID value from
XXXX0000 to SYNA2393.
Also, the _STA relies on value of I2CN to report correct status.
Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be
correctly set up, and _INI can get run. The ACPI table in this machine
is designed to get parsed this way.
Also, change the quirk table to a more generic name.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/bus.c | 38 +++++++++++++++++++++++++++++++-------
1 file changed, 31 insertions(+), 7 deletions(-)
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -66,10 +66,37 @@ static int set_copy_dsdt(const struct dm
return 0;
}
#endif
+static int set_gbl_term_list(const struct dmi_system_id *id)
+{
+ acpi_gbl_parse_table_as_term_list = 1;
+ return 0;
+}
-static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
+static const struct dmi_system_id acpi_quirks_dmi_table[] __initconst = {
+ /*
+ * Touchpad on Dell XPS 9570/Precision M5530 doesn't work under I2C
+ * mode.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=198515
+ */
+ {
+ .callback = set_gbl_term_list,
+ .ident = "Dell Precision M5530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision M5530"),
+ },
+ },
+ {
+ .callback = set_gbl_term_list,
+ .ident = "Dell XPS 15 9570",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9570"),
+ },
+ },
/*
* Invoke DSDT corruption work-around on all Toshiba Satellite.
+ * DSDT will be copied to memory.
* https://bugzilla.kernel.org/show_bug.cgi?id=14679
*/
{
@@ -83,7 +110,7 @@ static const struct dmi_system_id dsdt_d
{}
};
#else
-static const struct dmi_system_id dsdt_dmi_table[] __initconst = {
+static const struct dmi_system_id acpi_quirks_dmi_table[] __initconst = {
{}
};
#endif
@@ -1001,11 +1028,8 @@ void __init acpi_early_init(void)
acpi_permanent_mmap = true;
- /*
- * If the machine falls into the DMI check table,
- * DSDT will be copied to memory
- */
- dmi_check_system(dsdt_dmi_table);
+ /* Check machine-specific quirks */
+ dmi_check_system(acpi_quirks_dmi_table);
status = acpi_reallocate_root_table();
if (ACPI_FAILURE(status)) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit e6f02a4d57cc438099bc8abfba43ba1400d77b38 ]
Set correct size of the CIM LA dump for T6.
Fixes: 27887bc7cb7f ("cxgb4: collect hardware LA dumps")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: Ganesh Goudar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c | 2 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c
@@ -156,7 +156,7 @@ int cudbg_collect_cim_la(struct cudbg_in
if (is_t6(padap->params.chip)) {
size = padap->params.cim_la_size / 10 + 1;
- size *= 11 * sizeof(u32);
+ size *= 10 * sizeof(u32);
} else {
size = padap->params.cim_la_size / 8;
size *= 8 * sizeof(u32);
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c
@@ -97,7 +97,7 @@ static u32 cxgb4_get_entity_length(struc
case CUDBG_CIM_LA:
if (is_t6(adap->params.chip)) {
len = adap->params.cim_la_size / 10 + 1;
- len *= 11 * sizeof(u32);
+ len *= 10 * sizeof(u32);
} else {
len = adap->params.cim_la_size / 8;
len *= 8 * sizeof(u32);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Pismenny <[email protected]>
[ Upstream commit c113187d38ff85dc302a1bb55864b203ebb2ba10 ]
The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.
This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.
Fixes: 3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <[email protected]>
Signed-off-by: Ilya Lesokhin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tls/tls_main.c | 52 +++++++++++++++++++++++++++++++++++++---------------
1 file changed, 37 insertions(+), 15 deletions(-)
--- a/net/tls/tls_main.c
+++ b/net/tls/tls_main.c
@@ -46,16 +46,26 @@ MODULE_DESCRIPTION("Transport Layer Secu
MODULE_LICENSE("Dual BSD/GPL");
enum {
+ TLSV4,
+ TLSV6,
+ TLS_NUM_PROTS,
+};
+
+enum {
TLS_BASE_TX,
TLS_SW_TX,
TLS_NUM_CONFIG,
};
-static struct proto tls_prots[TLS_NUM_CONFIG];
+static struct proto *saved_tcpv6_prot;
+static DEFINE_MUTEX(tcpv6_prot_mutex);
+static struct proto tls_prots[TLS_NUM_PROTS][TLS_NUM_CONFIG];
static inline void update_sk_prot(struct sock *sk, struct tls_context *ctx)
{
- sk->sk_prot = &tls_prots[ctx->tx_conf];
+ int ip_ver = sk->sk_family == AF_INET6 ? TLSV6 : TLSV4;
+
+ sk->sk_prot = &tls_prots[ip_ver][ctx->tx_conf];
}
int wait_on_pending_writer(struct sock *sk, long *timeo)
@@ -450,8 +460,21 @@ static int tls_setsockopt(struct sock *s
return do_tls_setsockopt(sk, optname, optval, optlen);
}
+static void build_protos(struct proto *prot, struct proto *base)
+{
+ prot[TLS_BASE_TX] = *base;
+ prot[TLS_BASE_TX].setsockopt = tls_setsockopt;
+ prot[TLS_BASE_TX].getsockopt = tls_getsockopt;
+ prot[TLS_BASE_TX].close = tls_sk_proto_close;
+
+ prot[TLS_SW_TX] = prot[TLS_BASE_TX];
+ prot[TLS_SW_TX].sendmsg = tls_sw_sendmsg;
+ prot[TLS_SW_TX].sendpage = tls_sw_sendpage;
+}
+
static int tls_init(struct sock *sk)
{
+ int ip_ver = sk->sk_family == AF_INET6 ? TLSV6 : TLSV4;
struct inet_connection_sock *icsk = inet_csk(sk);
struct tls_context *ctx;
int rc = 0;
@@ -476,6 +499,17 @@ static int tls_init(struct sock *sk)
ctx->getsockopt = sk->sk_prot->getsockopt;
ctx->sk_proto_close = sk->sk_prot->close;
+ /* Build IPv6 TLS whenever the address of tcpv6_prot changes */
+ if (ip_ver == TLSV6 &&
+ unlikely(sk->sk_prot != smp_load_acquire(&saved_tcpv6_prot))) {
+ mutex_lock(&tcpv6_prot_mutex);
+ if (likely(sk->sk_prot != saved_tcpv6_prot)) {
+ build_protos(tls_prots[TLSV6], sk->sk_prot);
+ smp_store_release(&saved_tcpv6_prot, sk->sk_prot);
+ }
+ mutex_unlock(&tcpv6_prot_mutex);
+ }
+
ctx->tx_conf = TLS_BASE_TX;
update_sk_prot(sk, ctx);
out:
@@ -488,21 +522,9 @@ static struct tcp_ulp_ops tcp_tls_ulp_op
.init = tls_init,
};
-static void build_protos(struct proto *prot, struct proto *base)
-{
- prot[TLS_BASE_TX] = *base;
- prot[TLS_BASE_TX].setsockopt = tls_setsockopt;
- prot[TLS_BASE_TX].getsockopt = tls_getsockopt;
- prot[TLS_BASE_TX].close = tls_sk_proto_close;
-
- prot[TLS_SW_TX] = prot[TLS_BASE_TX];
- prot[TLS_SW_TX].sendmsg = tls_sw_sendmsg;
- prot[TLS_SW_TX].sendpage = tls_sw_sendpage;
-}
-
static int __init tls_register(void)
{
- build_protos(tls_prots, &tcp_prot);
+ build_protos(tls_prots[TLSV4], &tcp_prot);
tcp_register_ulp(&tcp_tls_ulp_ops);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit 23e43f07f896f8578318cfcc9466f1e8b8ab21b6 ]
Except for tuntap, all other drivers' XDP was implemented at NAPI
poll() routine in a bh. This guarantees all XDP operation were done at
the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But
for tuntap, we do it in process context and we try to protect XDP
processing by RCU reader lock. This is insufficient since
CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which
breaks the assumption that all XDP were processed in the same CPU.
Fixing this by simply disabling preemption during XDP processing.
Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1471,6 +1471,7 @@ static struct sk_buff *tun_build_skb(str
else
*skb_xdp = 0;
+ preempt_disable();
rcu_read_lock();
xdp_prog = rcu_dereference(tun->xdp_prog);
if (xdp_prog && !*skb_xdp) {
@@ -1494,6 +1495,7 @@ static struct sk_buff *tun_build_skb(str
if (err)
goto err_redirect;
rcu_read_unlock();
+ preempt_enable();
return NULL;
case XDP_TX:
xdp_xmit = true;
@@ -1515,6 +1517,7 @@ static struct sk_buff *tun_build_skb(str
skb = build_skb(buf, buflen);
if (!skb) {
rcu_read_unlock();
+ preempt_enable();
return ERR_PTR(-ENOMEM);
}
@@ -1527,10 +1530,12 @@ static struct sk_buff *tun_build_skb(str
skb->dev = tun->dev;
generic_xdp_tx(skb, xdp_prog);
rcu_read_unlock();
+ preempt_enable();
return NULL;
}
rcu_read_unlock();
+ preempt_enable();
return skb;
@@ -1538,6 +1543,7 @@ err_redirect:
put_page(alloc_frag->page);
err_xdp:
rcu_read_unlock();
+ preempt_enable();
this_cpu_inc(tun->pcpu_stats->rx_dropped);
return NULL;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ulf Magnusson <[email protected]>
commit 8aa36a8dcde3183d84db7b0d622ffddcebb61077 upstream.
The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970,
but it was renamed to PL310_ERRATA_753970 by commit fa0ce4035d48 ("ARM:
7162/1: errata: tidy up Kconfig options for PL310 errata workarounds").
Fix the selects to use the new name.
Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Fixes: fa0ce4035d48 ("ARM: 7162/1: errata: tidy up Kconfig options for
PL310 errata workarounds"
cc: [email protected]
Signed-off-by: Ulf Magnusson <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-mvebu/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -42,7 +42,7 @@ config MACH_ARMADA_375
depends on ARCH_MULTI_V7
select ARMADA_370_XP_IRQ
select ARM_ERRATA_720789
- select ARM_ERRATA_753970
+ select PL310_ERRATA_753970
select ARM_GIC
select ARMADA_375_CLK
select HAVE_ARM_SCU
@@ -58,7 +58,7 @@ config MACH_ARMADA_38X
bool "Marvell Armada 380/385 boards"
depends on ARCH_MULTI_V7
select ARM_ERRATA_720789
- select ARM_ERRATA_753970
+ select PL310_ERRATA_753970
select ARM_GIC
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Soheil Hassas Yeganeh <[email protected]>
[ Upstream commit a27fd7a8ed3856faaf5a2ff1c8c5f00c0667aaa0 ]
When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.
RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07
Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_input.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3988,6 +3988,7 @@ void tcp_reset(struct sock *sk)
/* This barrier is coupled with smp_rmb() in tcp_poll() */
smp_wmb();
+ tcp_write_queue_purge(sk);
tcp_done(sk);
if (!sock_flag(sk, SOCK_DEAD))
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit 1bb4f2e868a2891ab8bc668b8173d6ccb8c4ce6f ]
We don't flush batched XDP packets through xdp_do_flush_map(), this
will cause packets stall at TX queue. Consider we don't do XDP on NAPI
poll(), the only possible fix is to call xdp_do_flush_map()
immediately after xdp_do_redirect().
Note, this in fact won't try to batch packets through devmap, we could
address in the future.
Reported-by: Christoffer Dall <[email protected]>
Fixes: 761876c857cb ("tap: XDP support")
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1490,6 +1490,7 @@ static struct sk_buff *tun_build_skb(str
get_page(alloc_frag->page);
alloc_frag->offset += buflen;
err = xdp_do_redirect(tun->dev, &xdp, xdp_prog);
+ xdp_do_flush_map();
if (err)
goto err_redirect;
rcu_read_unlock();
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <[email protected]>
[ Upstream commit b87b6194be631c94785fe93398651e804ed43e28 ]
Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.
This patch expands the error path to simply call module_put if
cb->start() fails.
Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netlink/af_netlink.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2275,7 +2275,7 @@ int __netlink_dump_start(struct sock *ss
if (cb->start) {
ret = cb->start(cb);
if (ret)
- goto error_unlock;
+ goto error_put;
}
nlk->cb_running = true;
@@ -2295,6 +2295,8 @@ int __netlink_dump_start(struct sock *ss
*/
return -EINTR;
+error_put:
+ module_put(control->module);
error_unlock:
sock_put(sk);
mutex_unlock(nlk->cb_mutex);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Beulich <[email protected]>
commit 842cef9113c2120f74f645111ded1e020193d84c upstream.
Just like pte_{set,clear}_flags() their PMD and PUD counterparts should
not do any address translation. This was outright wrong under Xen
(causing a dead boot with no useful output on "suitable" systems), and
produced needlessly more complicated code (even if just slightly) when
paravirt was enabled.
Signed-off-by: Jan Beulich <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/pgtable.h | 8 ++++----
arch/x86/include/asm/pgtable_types.h | 10 ++++++++++
2 files changed, 14 insertions(+), 4 deletions(-)
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -350,14 +350,14 @@ static inline pmd_t pmd_set_flags(pmd_t
{
pmdval_t v = native_pmd_val(pmd);
- return __pmd(v | set);
+ return native_make_pmd(v | set);
}
static inline pmd_t pmd_clear_flags(pmd_t pmd, pmdval_t clear)
{
pmdval_t v = native_pmd_val(pmd);
- return __pmd(v & ~clear);
+ return native_make_pmd(v & ~clear);
}
static inline pmd_t pmd_mkold(pmd_t pmd)
@@ -409,14 +409,14 @@ static inline pud_t pud_set_flags(pud_t
{
pudval_t v = native_pud_val(pud);
- return __pud(v | set);
+ return native_make_pud(v | set);
}
static inline pud_t pud_clear_flags(pud_t pud, pudval_t clear)
{
pudval_t v = native_pud_val(pud);
- return __pud(v & ~clear);
+ return native_make_pud(v & ~clear);
}
static inline pud_t pud_mkold(pud_t pud)
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -323,6 +323,11 @@ static inline pudval_t native_pud_val(pu
#else
#include <asm-generic/pgtable-nopud.h>
+static inline pud_t native_make_pud(pudval_t val)
+{
+ return (pud_t) { .p4d.pgd = native_make_pgd(val) };
+}
+
static inline pudval_t native_pud_val(pud_t pud)
{
return native_pgd_val(pud.p4d.pgd);
@@ -344,6 +349,11 @@ static inline pmdval_t native_pmd_val(pm
#else
#include <asm-generic/pgtable-nopmd.h>
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+ return (pmd_t) { .pud.p4d.pgd = native_make_pgd(val) };
+}
+
static inline pmdval_t native_pmd_val(pmd_t pmd)
{
return native_pgd_val(pmd.pud.p4d.pgd);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Wang <[email protected]>
[ Upstream commit 4e09ff5362843dff3accfa84c805c7f3a99de9cd ]
We try to disable NAPI to prevent a single XDP TX queue being used by
multiple cpus. But we don't check if device is up (NAPI is enabled),
this could result stall because of infinite wait in
napi_disable(). Fixing this by checking device state through
netif_running() before.
Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set")
Signed-off-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/virtio_net.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2040,8 +2040,9 @@ static int virtnet_xdp_set(struct net_de
}
/* Make sure NAPI is not using any XDP TX queues for RX. */
- for (i = 0; i < vi->max_queue_pairs; i++)
- napi_disable(&vi->rq[i].napi);
+ if (netif_running(dev))
+ for (i = 0; i < vi->max_queue_pairs; i++)
+ napi_disable(&vi->rq[i].napi);
netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp);
err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
@@ -2060,7 +2061,8 @@ static int virtnet_xdp_set(struct net_de
}
if (old_prog)
bpf_prog_put(old_prog);
- virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
+ if (netif_running(dev))
+ virtnet_napi_enable(vi->rq[i].vq, &vi->rq[i].napi);
}
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 8337d083507b9827dfb36d545538b7789df834fd upstream.
A section type mismatch warning shows up when building with LTO,
since orion_ge00_mvmdio_bus_name was put in __initconst but not marked
const itself:
include/linux/of.h: In function 'spear_setup_of_timer':
arch/arm/mach-spear/time.c:207:34: error: 'timer_of_match' causes a section type conflict with 'orion_ge00_mvmdio_bus_name'
static const struct of_device_id timer_of_match[] __initconst = {
^
arch/arm/plat-orion/common.c:475:32: note: 'orion_ge00_mvmdio_bus_name' was declared here
static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
^
As pointed out by Andrew Lunn, it should in fact be 'const' but not
'__initconst' because the string is never copied but may be accessed
after the init sections are freed. To fix that, I get rid of the
extra symbol and rewrite the initialization in a simpler way that
assigns both the bus_id and modalias statically.
I spotted another theoretical bug in the same place, where d->netdev[i]
may be an out of bounds access, this can be fixed by moving the device
assignment into the loop.
Cc: [email protected]
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/plat-orion/common.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643
/*****************************************************************************
* Ethernet switch
****************************************************************************/
-static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
-static __initdata struct mdio_board_info
- orion_ge00_switch_board_info;
+static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
+ .bus_id = "orion-mii",
+ .modalias = "mv88e6085",
+};
void __init orion_ge00_switch_init(struct dsa_chip_data *d)
{
- struct mdio_board_info *bd;
unsigned int i;
if (!IS_BUILTIN(CONFIG_PHYLIB))
return;
- for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
- if (!strcmp(d->port_names[i], "cpu"))
+ for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
+ if (!strcmp(d->port_names[i], "cpu")) {
+ d->netdev[i] = &orion_ge00.dev;
break;
+ }
+ }
- bd = &orion_ge00_switch_board_info;
- bd->bus_id = orion_ge00_mvmdio_bus_name;
- bd->mdio_addr = d->sw_addr;
- d->netdev[i] = &orion_ge00.dev;
- strcpy(bd->modalias, "mv88e6085");
- bd->platform_data = d;
+ orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
+ orion_ge00_switch_board_info.platform_data = d;
mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rasmus Villemoes <[email protected]>
commit b98c6a160a057d5686a8c54c79cc6c8c94a7d0c8 upstream.
The last expression in a statement expression need not be a bare
variable, quoting gcc docs
The last thing in the compound statement should be an expression
followed by a semicolon; the value of this subexpression serves as the
value of the entire construct.
and we already use that in e.g. the min/max macros which end with a
ternary expression.
This way, we can allow index to have const-qualified type, which will in
some cases avoid the need for introducing a local copy of index of
non-const qualified type. That, in turn, can prevent readers not
familiar with the internals of array_index_nospec from wondering about
the seemingly redundant extra variable, and I think that's worthwhile
considering how confusing the whole _nospec business is.
The expression _i&_mask has type unsigned long (since that is the type
of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to
that), so in order not to change the type of the whole expression, add
a cast back to typeof(_i).
Signed-off-by: Rasmus Villemoes <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/nospec.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/include/linux/nospec.h
+++ b/include/linux/nospec.h
@@ -72,7 +72,6 @@ static inline unsigned long array_index_
BUILD_BUG_ON(sizeof(_i) > sizeof(long)); \
BUILD_BUG_ON(sizeof(_s) > sizeof(long)); \
\
- _i &= _mask; \
- _i; \
+ (typeof(_i)) (_i & _mask); \
})
#endif /* _LINUX_NOSPEC_H */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit 5fe01793dd953ab947fababe8abaf5ed5258c8df upstream.
Missed when enabling the Multiple-epoch facility. If the facility is
installed and the control is set, a sign based comaprison has to be
performed.
Right now we would inject wrong interrupts and ignore interrupt
conditions. Also the sleep time is calculated in a wrong way.
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: [email protected]
Reviewed-by: Christian Borntraeger <[email protected]>
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/interrupt.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -170,8 +170,15 @@ static int ckc_interrupts_enabled(struct
static int ckc_irq_pending(struct kvm_vcpu *vcpu)
{
- if (vcpu->arch.sie_block->ckc >= kvm_s390_get_tod_clock_fast(vcpu->kvm))
+ const u64 now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
+ const u64 ckc = vcpu->arch.sie_block->ckc;
+
+ if (vcpu->arch.sie_block->gcr[0] & 0x0020000000000000ul) {
+ if ((s64)ckc >= (s64)now)
+ return 0;
+ } else if (ckc >= now) {
return 0;
+ }
return ckc_interrupts_enabled(vcpu);
}
@@ -1011,13 +1018,19 @@ int kvm_cpu_has_pending_timer(struct kvm
static u64 __calculate_sltime(struct kvm_vcpu *vcpu)
{
- u64 now, cputm, sltime = 0;
+ const u64 now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
+ const u64 ckc = vcpu->arch.sie_block->ckc;
+ u64 cputm, sltime = 0;
if (ckc_interrupts_enabled(vcpu)) {
- now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
- sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
- /* already expired or overflow? */
- if (!sltime || vcpu->arch.sie_block->ckc <= now)
+ if (vcpu->arch.sie_block->gcr[0] & 0x0020000000000000ul) {
+ if ((s64)now < (s64)ckc)
+ sltime = tod_to_ns((s64)ckc - (s64)now);
+ } else if (now < ckc) {
+ sltime = tod_to_ns(ckc - now);
+ }
+ /* already expired */
+ if (!sltime)
return 0;
if (cpu_timer_interrupts_enabled(vcpu)) {
cputm = kvm_s390_get_cpu_timer(vcpu);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit d16b52cb9cdb6f06dea8ab2f0a428e7d7f0b0a81 upstream.
We must copy both, the epoch and the epoch_idx.
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Reviewed-by: Cornelia Huck <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: [email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -2359,6 +2359,7 @@ void kvm_arch_vcpu_postcreate(struct kvm
mutex_lock(&vcpu->kvm->lock);
preempt_disable();
vcpu->arch.sie_block->epoch = vcpu->kvm->arch.epoch;
+ vcpu->arch.sie_block->epdx = vcpu->kvm->arch.epdx;
preempt_enable();
mutex_unlock(&vcpu->kvm->lock);
if (!kvm_is_ucontrol(vcpu->kvm)) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Hildenbrand <[email protected]>
commit 0e7def5fb0dc53ddbb9f62a497d15f1e11ccdc36 upstream.
Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.
Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Fixes: 8fa1696ea781 ("KVM: s390: Multiple Epoch Facility support")
Cc: [email protected]
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 46 +++++++++++++++-------------------------------
arch/s390/kvm/kvm-s390.h | 5 ++---
arch/s390/kvm/priv.c | 9 +++++----
3 files changed, 22 insertions(+), 38 deletions(-)
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -889,12 +889,9 @@ static int kvm_s390_set_tod_ext(struct k
if (copy_from_user(>od, (void __user *)attr->addr, sizeof(gtod)))
return -EFAULT;
- if (test_kvm_facility(kvm, 139))
- kvm_s390_set_tod_clock_ext(kvm, >od);
- else if (gtod.epoch_idx == 0)
- kvm_s390_set_tod_clock(kvm, gtod.tod);
- else
+ if (!test_kvm_facility(kvm, 139) && gtod.epoch_idx)
return -EINVAL;
+ kvm_s390_set_tod_clock(kvm, >od);
VM_EVENT(kvm, 3, "SET: TOD extension: 0x%x, TOD base: 0x%llx",
gtod.epoch_idx, gtod.tod);
@@ -919,13 +916,14 @@ static int kvm_s390_set_tod_high(struct
static int kvm_s390_set_tod_low(struct kvm *kvm, struct kvm_device_attr *attr)
{
- u64 gtod;
+ struct kvm_s390_vm_tod_clock gtod = { 0 };
- if (copy_from_user(>od, (void __user *)attr->addr, sizeof(gtod)))
+ if (copy_from_user(>od.tod, (void __user *)attr->addr,
+ sizeof(gtod.tod)))
return -EFAULT;
- kvm_s390_set_tod_clock(kvm, gtod);
- VM_EVENT(kvm, 3, "SET: TOD base: 0x%llx", gtod);
+ kvm_s390_set_tod_clock(kvm, >od);
+ VM_EVENT(kvm, 3, "SET: TOD base: 0x%llx", gtod.tod);
return 0;
}
@@ -2947,8 +2945,8 @@ retry:
return 0;
}
-void kvm_s390_set_tod_clock_ext(struct kvm *kvm,
- const struct kvm_s390_vm_tod_clock *gtod)
+void kvm_s390_set_tod_clock(struct kvm *kvm,
+ const struct kvm_s390_vm_tod_clock *gtod)
{
struct kvm_vcpu *vcpu;
struct kvm_s390_tod_clock_ext htod;
@@ -2960,10 +2958,12 @@ void kvm_s390_set_tod_clock_ext(struct k
get_tod_clock_ext((char *)&htod);
kvm->arch.epoch = gtod->tod - htod.tod;
- kvm->arch.epdx = gtod->epoch_idx - htod.epoch_idx;
-
- if (kvm->arch.epoch > gtod->tod)
- kvm->arch.epdx -= 1;
+ kvm->arch.epdx = 0;
+ if (test_kvm_facility(kvm, 139)) {
+ kvm->arch.epdx = gtod->epoch_idx - htod.epoch_idx;
+ if (kvm->arch.epoch > gtod->tod)
+ kvm->arch.epdx -= 1;
+ }
kvm_s390_vcpu_block_all(kvm);
kvm_for_each_vcpu(i, vcpu, kvm) {
@@ -2974,22 +2974,6 @@ void kvm_s390_set_tod_clock_ext(struct k
kvm_s390_vcpu_unblock_all(kvm);
preempt_enable();
mutex_unlock(&kvm->lock);
-}
-
-void kvm_s390_set_tod_clock(struct kvm *kvm, u64 tod)
-{
- struct kvm_vcpu *vcpu;
- int i;
-
- mutex_lock(&kvm->lock);
- preempt_disable();
- kvm->arch.epoch = tod - get_tod_clock();
- kvm_s390_vcpu_block_all(kvm);
- kvm_for_each_vcpu(i, vcpu, kvm)
- vcpu->arch.sie_block->epoch = kvm->arch.epoch;
- kvm_s390_vcpu_unblock_all(kvm);
- preempt_enable();
- mutex_unlock(&kvm->lock);
}
/**
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -268,9 +268,8 @@ int kvm_s390_handle_sigp(struct kvm_vcpu
int kvm_s390_handle_sigp_pei(struct kvm_vcpu *vcpu);
/* implemented in kvm-s390.c */
-void kvm_s390_set_tod_clock_ext(struct kvm *kvm,
- const struct kvm_s390_vm_tod_clock *gtod);
-void kvm_s390_set_tod_clock(struct kvm *kvm, u64 tod);
+void kvm_s390_set_tod_clock(struct kvm *kvm,
+ const struct kvm_s390_vm_tod_clock *gtod);
long kvm_arch_fault_in_page(struct kvm_vcpu *vcpu, gpa_t gpa, int writable);
int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long addr);
int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr);
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -81,9 +81,10 @@ int kvm_s390_handle_e3(struct kvm_vcpu *
/* Handle SCK (SET CLOCK) interception */
static int handle_set_clock(struct kvm_vcpu *vcpu)
{
+ struct kvm_s390_vm_tod_clock gtod = { 0 };
int rc;
u8 ar;
- u64 op2, val;
+ u64 op2;
if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
@@ -91,12 +92,12 @@ static int handle_set_clock(struct kvm_v
op2 = kvm_s390_get_base_disp_s(vcpu, &ar);
if (op2 & 7) /* Operand must be on a doubleword boundary */
return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
- rc = read_guest(vcpu, op2, ar, &val, sizeof(val));
+ rc = read_guest(vcpu, op2, ar, >od.tod, sizeof(gtod.tod));
if (rc)
return kvm_s390_inject_prog_cond(vcpu, rc);
- VCPU_EVENT(vcpu, 3, "SCK: setting guest TOD to 0x%llx", val);
- kvm_s390_set_tod_clock(vcpu->kvm, val);
+ VCPU_EVENT(vcpu, 3, "SCK: setting guest TOD to 0x%llx", gtod.tod);
+ kvm_s390_set_tod_clock(vcpu->kvm, >od);
kvm_s390_set_psw_cc(vcpu, 0);
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anna Karbownik <[email protected]>
commit bf8486709ac7fad99e4040dea73fe466c57a4ae1 upstream.
Commit
3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights
Landing which supports up to 6 channels.
This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm
variables which don't pay critical role on KNL code path, so the memory
corruption wasn't causing any visible driver failures.
The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that.
An alternative solution would be to restructure the KNL part of the
driver to 2MC/3channel representation.
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Anna Karbownik <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: linux-edac <[email protected]>
Cc: <[email protected]>
Fixes: 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4")
Link: http://lkml.kernel.org/r/[email protected]
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/edac/sb_edac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -279,7 +279,7 @@ static const u32 correrrthrsld[] = {
* sbridge structs
*/
-#define NUM_CHANNELS 4 /* Max channels per MC */
+#define NUM_CHANNELS 6 /* Max channels per MC */
#define MAX_DIMMS 3 /* Max DIMMS per channel */
#define KNL_MAX_CHAS 38 /* KNL max num. of Cache Home Agents */
#define KNL_MAX_CHANNELS 6 /* KNL max num. of PCI channels */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream.
If m88d3103 chip ID is not recognized, the device is not initialized.
However, it returns from probe without any error, causing this OOPS:
[ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 7.689297] pgd = 7b0bd7a7
[ 7.689302] [00000000] *pgd=00000000
[ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM
[ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media
[ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23
[ 7.689361] Hardware name: BCM2835
[ 7.689367] PC is at 0x0
[ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103]
[ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013
[ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0
[ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0
[ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600
[ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600
[ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051
[ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63)
[ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000)
[ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10
[ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000
[ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000
[ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434
[ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0
[ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000
[ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8
[ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600
[ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000
[ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4
[ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc
[ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4
[ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000
[ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000
[ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0
[ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24
[ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0
[ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684
[ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000
[ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000
[ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104
[ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000
[ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8
[ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4
[ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000
[ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c
[ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0
[ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000
[ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky])
[ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2])
[ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8)
[ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4)
[ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c)
[ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c)
[ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264)
[ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4)
[ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134)
[ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168)
[ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4)
[ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8)
[ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec)
[ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54)
[ 7.690018] Code: bad PC value
This may happen on normal circumstances, if, for some reason, the demod
hangs and start returning an invalid chip ID:
[ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00
So, change the logic to cause probe to fail with -ENODEV, preventing
the OOPS.
Detected while testing DVB MMAP patches on Raspberry Pi 3 with
DVBSky S960CI.
Cc: [email protected]
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/dvb-frontends/m88ds3103.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/media/dvb-frontends/m88ds3103.c
+++ b/drivers/media/dvb-frontends/m88ds3103.c
@@ -1262,11 +1262,12 @@ static int m88ds3103_select(struct i2c_m
* New users must use I2C client binding directly!
*/
struct dvb_frontend *m88ds3103_attach(const struct m88ds3103_config *cfg,
- struct i2c_adapter *i2c, struct i2c_adapter **tuner_i2c_adapter)
+ struct i2c_adapter *i2c,
+ struct i2c_adapter **tuner_i2c_adapter)
{
struct i2c_client *client;
struct i2c_board_info board_info;
- struct m88ds3103_platform_data pdata;
+ struct m88ds3103_platform_data pdata = {};
pdata.clk = cfg->clock;
pdata.i2c_wr_max = cfg->i2c_wr_max;
@@ -1409,6 +1410,8 @@ static int m88ds3103_probe(struct i2c_cl
case M88DS3103_CHIP_ID:
break;
default:
+ ret = -ENODEV;
+ dev_err(&client->dev, "Unknown device. Chip_id=%02x\n", dev->chip_id);
goto err_kfree;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit d1c95af366961101819f07e3c64d44f3be7f0367 ]
When mlxsw replaces (or deletes) a route it removes the offload
indication from the replaced route. This is problematic for IPv4 routes,
as the offload indication is stored in the fib_info which is usually
shared between multiple routes.
Instead of unconditionally clearing the offload indication, only clear
it if no other route is using the fib_info.
Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Alexander Petrovskiy <[email protected]>
Tested-by: Alexander Petrovskiy <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -3765,6 +3765,9 @@ mlxsw_sp_fib4_entry_offload_unset(struct
struct mlxsw_sp_nexthop_group *nh_grp = fib_entry->nh_group;
int i;
+ if (!list_is_singular(&nh_grp->fib_list))
+ return;
+
for (i = 0; i < nh_grp->count; i++) {
struct mlxsw_sp_nexthop *nh = &nh_grp->nexthops[i];
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
commit 105976f517791aed3b11f8f53b308a2069d42055 upstream.
__blk_mq_requeue_request() covers two cases:
- one is that the requeued request is added to hctx->dispatch, such as
blk_mq_dispatch_rq_list()
- another case is that the request is requeued to io scheduler, such as
blk_mq_requeue_request().
We should call io sched's .requeue_request callback only for the 2nd
case.
Cc: Paolo Valente <[email protected]>
Cc: Omar Sandoval <[email protected]>
Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Cc: [email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Acked-by: Paolo Valente <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-mq.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -655,7 +655,6 @@ static void __blk_mq_requeue_request(str
trace_block_rq_requeue(q, rq);
wbt_requeue(q->rq_wb, &rq->issue_stat);
- blk_mq_sched_requeue_request(rq);
if (test_and_clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags)) {
if (q->dma_drain_size && blk_rq_bytes(rq))
@@ -667,6 +666,9 @@ void blk_mq_requeue_request(struct reque
{
__blk_mq_requeue_request(rq);
+ /* this request will be re-inserted to io scheduler queue */
+ blk_mq_sched_requeue_request(rq);
+
BUG_ON(blk_queued_rq(rq));
blk_mq_add_to_requeue_list(rq, true, kick_requeue_list);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]
If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.
So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().
Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.
As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_core_main.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2071,24 +2071,25 @@ int qeth_send_control_data(struct qeth_c
}
reply->callback = reply_cb;
reply->param = reply_param;
- if (card->state == CARD_STATE_DOWN)
- reply->seqno = QETH_IDX_COMMAND_SEQNO;
- else
- reply->seqno = card->seqno.ipa++;
+
init_waitqueue_head(&reply->wait_q);
- spin_lock_irqsave(&card->lock, flags);
- list_add_tail(&reply->list, &card->cmd_waiter_list);
- spin_unlock_irqrestore(&card->lock, flags);
while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
- qeth_prepare_control_data(card, len, iob);
if (IS_IPA(iob->data)) {
cmd = __ipa_cmd(iob);
+ cmd->hdr.seqno = card->seqno.ipa++;
+ reply->seqno = cmd->hdr.seqno;
event_timeout = QETH_IPA_TIMEOUT;
} else {
+ reply->seqno = QETH_IDX_COMMAND_SEQNO;
event_timeout = QETH_TIMEOUT;
}
+ qeth_prepare_control_data(card, len, iob);
+
+ spin_lock_irqsave(&card->lock, flags);
+ list_add_tail(&reply->list, &card->cmd_waiter_list);
+ spin_unlock_irqrestore(&card->lock, flags);
timeout = jiffies + event_timeout;
@@ -2870,7 +2871,7 @@ static void qeth_fill_ipacmd_header(stru
memset(cmd, 0, sizeof(struct qeth_ipa_cmd));
cmd->hdr.command = command;
cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST;
- cmd->hdr.seqno = card->seqno.ipa;
+ /* cmd->hdr.seqno is set by qeth_send_control_data() */
cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type);
cmd->hdr.rel_adapter_no = (__u8) card->info.portno;
if (card->options.layer2)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yuchung Cheng <[email protected]>
[ Upstream commit d4131f09770d9b7471c9da65e6ecd2477746ac5c ]
This reverts commit cc663f4d4c97b7297fb45135ab23cfd508b35a77. While fixing
some broken middle-boxes that modifies receive window fields, it does not
address middle-boxes that strip off SACK options. The best solution is
to fully revert this patch and the root F-RTO enhancement.
Fixes: cc663f4d4c97 ("tcp: restrict F-RTO to work-around broken middle-boxes")
Reported-by: Teodor Milkov <[email protected]>
Signed-off-by: Yuchung Cheng <[email protected]>
Signed-off-by: Neal Cardwell <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_input.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 45f750e85714..50963f92a67d 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1915,7 +1915,6 @@ void tcp_enter_loss(struct sock *sk)
struct tcp_sock *tp = tcp_sk(sk);
struct net *net = sock_net(sk);
struct sk_buff *skb;
- bool new_recovery = icsk->icsk_ca_state < TCP_CA_Recovery;
bool is_reneg; /* is receiver reneging on SACKs? */
bool mark_lost;
@@ -1974,17 +1973,15 @@ void tcp_enter_loss(struct sock *sk)
tp->high_seq = tp->snd_nxt;
tcp_ecn_queue_cwr(tp);
- /* F-RTO RFC5682 sec 3.1 step 1: retransmit SND.UNA if no previous
- * loss recovery is underway except recurring timeout(s) on
- * the same SND.UNA (sec 3.2). Disable F-RTO on path MTU probing
- *
- * In theory F-RTO can be used repeatedly during loss recovery.
- * In practice this interacts badly with broken middle-boxes that
- * falsely raise the receive window, which results in repeated
- * timeouts and stop-and-go behavior.
+ /* F-RTO RFC5682 sec 3.1 step 1 mandates to disable F-RTO
+ * if a previous recovery is underway, otherwise it may incorrectly
+ * call a timeout spurious if some previously retransmitted packets
+ * are s/acked (sec 3.2). We do not apply that retriction since
+ * retransmitted skbs are permanently tagged with TCPCB_EVER_RETRANS
+ * so FLAG_ORIG_SACK_ACKED is always correct. But we do disable F-RTO
+ * on PTMU discovery to avoid sending new data.
*/
tp->frto = net->ipv4.sysctl_tcp_frto &&
- (new_recovery || icsk->icsk_retransmits) &&
!inet_csk(sk)->icsk_mtup.probe_size;
}
--
2.14.3
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni <[email protected]>
[ Upstream commit d7cdee5ea8d28ae1b6922deb0c1badaa3aa0ef8c ]
Li Shuang reported an Oops with cls_u32 due to an use-after-free
in u32_destroy_key(). The use-after-free can be triggered with:
dev=lo
tc qdisc add dev $dev root handle 1: htb default 10
tc filter add dev $dev parent 1: prio 5 handle 1: protocol ip u32 divisor 256
tc filter add dev $dev protocol ip parent 1: prio 5 u32 ht 800:: match ip dst\
10.0.0.0/8 hashkey mask 0x0000ff00 at 16 link 1:
tc qdisc del dev $dev root
Which causes the following kasan splat:
==================================================================
BUG: KASAN: use-after-free in u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
Read of size 4 at addr ffff881b83dae618 by task kworker/u48:5/571
CPU: 17 PID: 571 Comm: kworker/u48:5 Not tainted 4.15.0+ #87
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016
Workqueue: tc_filter_workqueue u32_delete_key_freepf_work [cls_u32]
Call Trace:
dump_stack+0xd6/0x182
? dma_virt_map_sg+0x22e/0x22e
print_address_description+0x73/0x290
kasan_report+0x277/0x360
? u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
u32_destroy_key.constprop.21+0x117/0x140 [cls_u32]
u32_delete_key_freepf_work+0x1c/0x30 [cls_u32]
process_one_work+0xae0/0x1c80
? sched_clock+0x5/0x10
? pwq_dec_nr_in_flight+0x3c0/0x3c0
? _raw_spin_unlock_irq+0x29/0x40
? trace_hardirqs_on_caller+0x381/0x570
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1e5/0x760
? finish_task_switch+0x208/0x760
? preempt_notifier_dec+0x20/0x20
? __schedule+0x839/0x1ee0
? check_noncircular+0x20/0x20
? firmware_map_remove+0x73/0x73
? find_held_lock+0x39/0x1c0
? worker_thread+0x434/0x1820
? lock_contended+0xee0/0xee0
? lock_release+0x1100/0x1100
? init_rescuer.part.16+0x150/0x150
? retint_kernel+0x10/0x10
worker_thread+0x216/0x1820
? process_one_work+0x1c80/0x1c80
? lock_acquire+0x1a5/0x540
? lock_downgrade+0x6b0/0x6b0
? sched_clock+0x5/0x10
? lock_release+0x1100/0x1100
? compat_start_thread+0x80/0x80
? do_raw_spin_trylock+0x190/0x190
? _raw_spin_unlock_irq+0x29/0x40
? trace_hardirqs_on_caller+0x381/0x570
? _raw_spin_unlock_irq+0x29/0x40
? finish_task_switch+0x1e5/0x760
? finish_task_switch+0x208/0x760
? preempt_notifier_dec+0x20/0x20
? __schedule+0x839/0x1ee0
? kmem_cache_alloc_trace+0x143/0x320
? firmware_map_remove+0x73/0x73
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x170
? find_held_lock+0x39/0x1c0
? schedule+0xf3/0x3b0
? lock_downgrade+0x6b0/0x6b0
? __schedule+0x1ee0/0x1ee0
? do_wait_intr_irq+0x340/0x340
? do_raw_spin_trylock+0x190/0x190
? _raw_spin_unlock_irqrestore+0x32/0x60
? process_one_work+0x1c80/0x1c80
? process_one_work+0x1c80/0x1c80
kthread+0x312/0x3d0
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
Allocated by task 1688:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x162/0x380
u32_change+0x1220/0x3c9e [cls_u32]
tc_ctl_tfilter+0x1ba6/0x2f80
rtnetlink_rcv_msg+0x4f0/0x9d0
netlink_rcv_skb+0x124/0x320
netlink_unicast+0x430/0x600
netlink_sendmsg+0x8fa/0xd60
sock_sendmsg+0xb1/0xe0
___sys_sendmsg+0x678/0x980
__sys_sendmsg+0xc4/0x210
do_syscall_64+0x232/0x7f0
return_from_SYSCALL_64+0x0/0x75
Freed by task 112:
kasan_slab_free+0x71/0xc0
kfree+0x114/0x320
rcu_process_callbacks+0xc3f/0x1600
__do_softirq+0x2bf/0xc06
The buggy address belongs to the object at ffff881b83dae600
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 24 bytes inside of
4096-byte region [ffff881b83dae600, ffff881b83daf600)
The buggy address belongs to the page:
page:ffffea006e0f6a00 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0
flags: 0x17ffffc0008100(slab|head)
raw: 0017ffffc0008100 0000000000000000 0000000000000000 0000000100070007
raw: dead000000000100 dead000000000200 ffff880187c0e600 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff881b83dae500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff881b83dae580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff881b83dae600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff881b83dae680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff881b83dae700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The problem is that the htnode is freed before the linked knodes and the
latter will try to access the first at u32_destroy_key() time.
This change addresses the issue using the htnode refcnt to guarantee
the correct free order. While at it also add a RCU annotation,
to keep sparse happy.
v1 -> v2: use rtnl_derefence() instead of RCU read locks
v2 -> v3:
- don't check refcnt in u32_destroy_hnode()
- cleaned-up u32_destroy() implementation
- cleaned-up code comment
v3 -> v4:
- dropped unneeded comment
Reported-by: Li Shuang <[email protected]>
Fixes: c0d378ef1266 ("net_sched: use tcf_queue_work() in u32 filter")
Signed-off-by: Paolo Abeni <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_u32.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -397,10 +397,12 @@ static int u32_init(struct tcf_proto *tp
static int u32_destroy_key(struct tcf_proto *tp, struct tc_u_knode *n,
bool free_pf)
{
+ struct tc_u_hnode *ht = rtnl_dereference(n->ht_down);
+
tcf_exts_destroy(&n->exts);
tcf_exts_put_net(&n->exts);
- if (n->ht_down)
- n->ht_down->refcnt--;
+ if (ht && --ht->refcnt == 0)
+ kfree(ht);
#ifdef CONFIG_CLS_U32_PERF
if (free_pf)
free_percpu(n->pf);
@@ -653,16 +655,15 @@ static void u32_destroy(struct tcf_proto
hlist_del(&tp_c->hnode);
- for (ht = rtnl_dereference(tp_c->hlist);
- ht;
- ht = rtnl_dereference(ht->next)) {
- ht->refcnt--;
- u32_clear_hnode(tp, ht);
- }
-
while ((ht = rtnl_dereference(tp_c->hlist)) != NULL) {
+ u32_clear_hnode(tp, ht);
RCU_INIT_POINTER(tp_c->hlist, ht->next);
- kfree_rcu(ht, rcu);
+
+ /* u32_destroy_key() will later free ht for us, if it's
+ * still referenced by some knode
+ */
+ if (--ht->refcnt == 0)
+ kfree_rcu(ht, rcu);
}
idr_destroy(&tp_c->handle_idr);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit c5c48c58b259bb8f0482398370ee539d7a12df3e ]
Current code ("qeth_l3_ip_from_hash()") matches a queried address object
against objects in the IP table by IP address, Mask/Prefix Length and
MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually
require is either
a) "is this IP address registered" (ie. match by IP address only),
before adding a new address.
b) or "is this address object registered" (ie. match all relevant
attributes), before deleting an address.
Right now
1. the ADD path is too strict in its lookup, and eg. doesn't detect
conflicts between an existing NORMAL address and a new VIPA address
(because the NORMAL address will have mask != 0, while VIPA has
a mask == 0),
2. the DELETE path is not strict enough, and eg. allows del_rxip() to
delete a VIPA address as long as the IP address matches.
Fix all this by adding helpers (_addr_match_ip() and _addr_match_all())
that do the appropriate checking.
Note that the ADD path for NORMAL addresses is special, as qeth keeps
track of how many times such an address is in use (and there is no
immediate way of returning errors to the caller). So when a requested
NORMAL address _fully_ matches an existing one, it's not considered a
conflict and we merely increment the refcount.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_l3.h | 34 ++++++++++++++
drivers/s390/net/qeth_l3_main.c | 91 ++++++++++++++++++----------------------
2 files changed, 74 insertions(+), 51 deletions(-)
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -40,8 +40,40 @@ struct qeth_ipaddr {
unsigned int pfxlen;
} a6;
} u;
-
};
+
+static inline bool qeth_l3_addr_match_ip(struct qeth_ipaddr *a1,
+ struct qeth_ipaddr *a2)
+{
+ if (a1->proto != a2->proto)
+ return false;
+ if (a1->proto == QETH_PROT_IPV6)
+ return ipv6_addr_equal(&a1->u.a6.addr, &a2->u.a6.addr);
+ return a1->u.a4.addr == a2->u.a4.addr;
+}
+
+static inline bool qeth_l3_addr_match_all(struct qeth_ipaddr *a1,
+ struct qeth_ipaddr *a2)
+{
+ /* Assumes that the pair was obtained via qeth_l3_addr_find_by_ip(),
+ * so 'proto' and 'addr' match for sure.
+ *
+ * For ucast:
+ * - 'mac' is always 0.
+ * - 'mask'/'pfxlen' for RXIP/VIPA is always 0. For NORMAL, matching
+ * values are required to avoid mixups in takeover eligibility.
+ *
+ * For mcast,
+ * - 'mac' is mapped from the IP, and thus always matches.
+ * - 'mask'/'pfxlen' is always 0.
+ */
+ if (a1->type != a2->type)
+ return false;
+ if (a1->proto == QETH_PROT_IPV6)
+ return a1->u.a6.pfxlen == a2->u.a6.pfxlen;
+ return a1->u.a4.mask == a2->u.a4.mask;
+}
+
static inline u64 qeth_l3_ipaddr_hash(struct qeth_ipaddr *addr)
{
u64 ret = 0;
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -150,6 +150,24 @@ int qeth_l3_string_to_ipaddr(const char
return -EINVAL;
}
+static struct qeth_ipaddr *qeth_l3_find_addr_by_ip(struct qeth_card *card,
+ struct qeth_ipaddr *query)
+{
+ u64 key = qeth_l3_ipaddr_hash(query);
+ struct qeth_ipaddr *addr;
+
+ if (query->is_multicast) {
+ hash_for_each_possible(card->ip_mc_htable, addr, hnode, key)
+ if (qeth_l3_addr_match_ip(addr, query))
+ return addr;
+ } else {
+ hash_for_each_possible(card->ip_htable, addr, hnode, key)
+ if (qeth_l3_addr_match_ip(addr, query))
+ return addr;
+ }
+ return NULL;
+}
+
static void qeth_l3_convert_addr_to_bits(u8 *addr, u8 *bits, int len)
{
int i, j;
@@ -203,34 +221,6 @@ static bool qeth_l3_is_addr_covered_by_i
return rc;
}
-inline int
-qeth_l3_ipaddrs_is_equal(struct qeth_ipaddr *addr1, struct qeth_ipaddr *addr2)
-{
- return addr1->proto == addr2->proto &&
- !memcmp(&addr1->u, &addr2->u, sizeof(addr1->u)) &&
- !memcmp(&addr1->mac, &addr2->mac, sizeof(addr1->mac));
-}
-
-static struct qeth_ipaddr *
-qeth_l3_ip_from_hash(struct qeth_card *card, struct qeth_ipaddr *tmp_addr)
-{
- struct qeth_ipaddr *addr;
-
- if (tmp_addr->is_multicast) {
- hash_for_each_possible(card->ip_mc_htable, addr,
- hnode, qeth_l3_ipaddr_hash(tmp_addr))
- if (qeth_l3_ipaddrs_is_equal(tmp_addr, addr))
- return addr;
- } else {
- hash_for_each_possible(card->ip_htable, addr,
- hnode, qeth_l3_ipaddr_hash(tmp_addr))
- if (qeth_l3_ipaddrs_is_equal(tmp_addr, addr))
- return addr;
- }
-
- return NULL;
-}
-
int qeth_l3_delete_ip(struct qeth_card *card, struct qeth_ipaddr *tmp_addr)
{
int rc = 0;
@@ -245,8 +235,8 @@ int qeth_l3_delete_ip(struct qeth_card *
QETH_CARD_HEX(card, 4, ((char *)&tmp_addr->u.a6.addr) + 8, 8);
}
- addr = qeth_l3_ip_from_hash(card, tmp_addr);
- if (!addr)
+ addr = qeth_l3_find_addr_by_ip(card, tmp_addr);
+ if (!addr || !qeth_l3_addr_match_all(addr, tmp_addr))
return -ENOENT;
addr->ref_counter--;
@@ -268,6 +258,7 @@ int qeth_l3_add_ip(struct qeth_card *car
{
int rc = 0;
struct qeth_ipaddr *addr;
+ char buf[40];
QETH_CARD_TEXT(card, 4, "addip");
@@ -278,8 +269,20 @@ int qeth_l3_add_ip(struct qeth_card *car
QETH_CARD_HEX(card, 4, ((char *)&tmp_addr->u.a6.addr) + 8, 8);
}
- addr = qeth_l3_ip_from_hash(card, tmp_addr);
- if (!addr) {
+ addr = qeth_l3_find_addr_by_ip(card, tmp_addr);
+ if (addr) {
+ if (tmp_addr->type != QETH_IP_TYPE_NORMAL)
+ return -EADDRINUSE;
+ if (qeth_l3_addr_match_all(addr, tmp_addr)) {
+ addr->ref_counter++;
+ return 0;
+ }
+ qeth_l3_ipaddr_to_string(tmp_addr->proto, (u8 *)&tmp_addr->u,
+ buf);
+ dev_warn(&card->gdev->dev,
+ "Registering IP address %s failed\n", buf);
+ return -EADDRINUSE;
+ } else {
addr = qeth_l3_get_addr_buffer(tmp_addr->proto);
if (!addr)
return -ENOMEM;
@@ -327,11 +330,7 @@ int qeth_l3_add_ip(struct qeth_card *car
hash_del(&addr->hnode);
kfree(addr);
}
- } else {
- if (addr->type == QETH_IP_TYPE_NORMAL)
- addr->ref_counter++;
}
-
return rc;
}
@@ -715,12 +714,7 @@ int qeth_l3_add_vipa(struct qeth_card *c
return -ENOMEM;
spin_lock_bh(&card->ip_lock);
-
- if (qeth_l3_ip_from_hash(card, ipaddr))
- rc = -EEXIST;
- else
- qeth_l3_add_ip(card, ipaddr);
-
+ rc = qeth_l3_add_ip(card, ipaddr);
spin_unlock_bh(&card->ip_lock);
kfree(ipaddr);
@@ -783,12 +777,7 @@ int qeth_l3_add_rxip(struct qeth_card *c
return -ENOMEM;
spin_lock_bh(&card->ip_lock);
-
- if (qeth_l3_ip_from_hash(card, ipaddr))
- rc = -EEXIST;
- else
- qeth_l3_add_ip(card, ipaddr);
-
+ rc = qeth_l3_add_ip(card, ipaddr);
spin_unlock_bh(&card->ip_lock);
kfree(ipaddr);
@@ -1396,8 +1385,9 @@ qeth_l3_add_mc_to_hash(struct qeth_card
memcpy(tmp->mac, buf, sizeof(tmp->mac));
tmp->is_multicast = 1;
- ipm = qeth_l3_ip_from_hash(card, tmp);
+ ipm = qeth_l3_find_addr_by_ip(card, tmp);
if (ipm) {
+ /* for mcast, by-IP match means full match */
ipm->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
} else {
ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV4);
@@ -1480,8 +1470,9 @@ qeth_l3_add_mc6_to_hash(struct qeth_card
sizeof(struct in6_addr));
tmp->is_multicast = 1;
- ipm = qeth_l3_ip_from_hash(card, tmp);
+ ipm = qeth_l3_find_addr_by_ip(card, tmp);
if (ipm) {
+ /* for mcast, by-IP match means full match */
ipm->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
continue;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 14d066c3531a87f727968cacd85bd95c75f59843 ]
Registering an IPv4 address with the HW takes quite a while, so we
temporarily drop the ip_htable lock. Any concurrent add/remove of the
same IP adjusts the IP's use count, and (on remove) is then blocked by
addr->in_progress.
After the register call has completed, we check the use count for
concurrently attempted add/remove calls - and possibly straight-away
deregister the IP again. This happens via l3_delete_ip(), which
1) looks up the queried IP in the htable (getting a reference to the
*same* queried object),
2) deregisters the IP from the HW, and
3) frees the IP object.
The caller in l3_add_ip() then does a second free on the same object.
For this case, skip all the extra checks and lookups in l3_delete_ip()
and just deregister & free the IP object ourselves.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_l3_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -320,7 +320,8 @@ int qeth_l3_add_ip(struct qeth_card *car
(rc == IPA_RC_LAN_OFFLINE)) {
addr->disp_flag = QETH_DISP_ADDR_DO_NOTHING;
if (addr->ref_counter < 1) {
- qeth_l3_delete_ip(card, addr);
+ qeth_l3_deregister_addr_entry(card, addr);
+ hash_del(&addr->hnode);
kfree(addr);
}
} else {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 12472af89632beb1ed8dea29d4efe208ca05b06a ]
qeth_get_elements_for_range() doesn't know how to handle a 0-length
range (ie. start == end), and returns 1 when it should return 0.
Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all
of the skb's linear data) are skipped when mapping the skb into regular
buffer elements.
This overestimation may cause several performance-related issues:
1. sub-optimal IO buffer selection, where the next buffer gets selected
even though the skb would actually still fit into the current buffer.
2. forced linearization, if the element count for a non-linear skb
exceeds QETH_MAX_BUFFER_ELEMENTS.
Rather than modifying qeth_get_elements_for_range() and adding overhead
to every caller, fix up those callers that are in risk of passing a
0-length range.
Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_core_main.c | 10 ++++++----
drivers/s390/net/qeth_l3_main.c | 11 ++++++-----
2 files changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3835,10 +3835,12 @@ EXPORT_SYMBOL_GPL(qeth_get_elements_for_
int qeth_get_elements_no(struct qeth_card *card,
struct sk_buff *skb, int extra_elems, int data_offset)
{
- int elements = qeth_get_elements_for_range(
- (addr_t)skb->data + data_offset,
- (addr_t)skb->data + skb_headlen(skb)) +
- qeth_get_elements_for_frags(skb);
+ addr_t end = (addr_t)skb->data + skb_headlen(skb);
+ int elements = qeth_get_elements_for_frags(skb);
+ addr_t start = (addr_t)skb->data + data_offset;
+
+ if (start != end)
+ elements += qeth_get_elements_for_range(start, end);
if ((elements + extra_elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2629,11 +2629,12 @@ static void qeth_tso_fill_header(struct
static int qeth_l3_get_elements_no_tso(struct qeth_card *card,
struct sk_buff *skb, int extra_elems)
{
- addr_t tcpdptr = (addr_t)tcp_hdr(skb) + tcp_hdrlen(skb);
- int elements = qeth_get_elements_for_range(
- tcpdptr,
- (addr_t)skb->data + skb_headlen(skb)) +
- qeth_get_elements_for_frags(skb);
+ addr_t start = (addr_t)tcp_hdr(skb) + tcp_hdrlen(skb);
+ addr_t end = (addr_t)skb->data + skb_headlen(skb);
+ int elements = qeth_get_elements_for_frags(skb);
+
+ if (start != end)
+ elements += qeth_get_elements_for_range(start, end);
if ((elements + extra_elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
QETH_DBF_MESSAGE(2,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 98d823ab1fbdcb13abc25b420f9bb71bade42056 ]
If the HW is not reachable, then none of the IPs in qeth's internal
table has been registered with the HW yet. So when deleting such an IP,
there's no need to stage it for deregistration - just drop it from
the table.
This fixes the "add-delete-add" scenario on an offline card, where the
the second "add" merely increments the IP's use count. But as the IP is
still set to DISP_ADDR_DELETE from the previous "delete" step,
l3_recover_ip() won't register it with the HW when the card goes online.
Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_l3_main.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -256,12 +256,8 @@ int qeth_l3_delete_ip(struct qeth_card *
if (addr->in_progress)
return -EINPROGRESS;
- if (!qeth_card_hw_is_reachable(card)) {
- addr->disp_flag = QETH_DISP_ADDR_DELETE;
- return 0;
- }
-
- rc = qeth_l3_deregister_addr_entry(card, addr);
+ if (qeth_card_hw_is_reachable(card))
+ rc = qeth_l3_deregister_addr_entry(card, addr);
hash_del(&addr->hnode);
kfree(addr);
@@ -404,11 +400,7 @@ static void qeth_l3_recover_ip(struct qe
spin_lock_bh(&card->ip_lock);
hash_for_each_safe(card->ip_htable, i, tmp, addr, hnode) {
- if (addr->disp_flag == QETH_DISP_ADDR_DELETE) {
- qeth_l3_deregister_addr_entry(card, addr);
- hash_del(&addr->hnode);
- kfree(addr);
- } else if (addr->disp_flag == QETH_DISP_ADDR_ADD) {
+ if (addr->disp_flag == QETH_DISP_ADDR_ADD) {
if (addr->proto == QETH_PROT_IPV4) {
addr->in_progress = 1;
spin_unlock_bh(&card->ip_lock);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Julian Wiedmann <[email protected]>
[ Upstream commit 1c5b2216fbb973a9410e0b06389740b5c1289171 ]
send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.
Fixes: 5b54e16f1a54 ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_core.h | 5 +++++
drivers/s390/net/qeth_core_main.c | 14 ++++++++------
2 files changed, 13 insertions(+), 6 deletions(-)
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -581,6 +581,11 @@ struct qeth_cmd_buffer {
void (*callback) (struct qeth_channel *, struct qeth_cmd_buffer *);
};
+static inline struct qeth_ipa_cmd *__ipa_cmd(struct qeth_cmd_buffer *iob)
+{
+ return (struct qeth_ipa_cmd *)(iob->data + IPA_PDU_HEADER_SIZE);
+}
+
/**
* definition of a qeth channel, used for read and write
*/
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2057,7 +2057,7 @@ int qeth_send_control_data(struct qeth_c
unsigned long flags;
struct qeth_reply *reply = NULL;
unsigned long timeout, event_timeout;
- struct qeth_ipa_cmd *cmd;
+ struct qeth_ipa_cmd *cmd = NULL;
QETH_CARD_TEXT(card, 2, "sendctl");
@@ -2083,10 +2083,13 @@ int qeth_send_control_data(struct qeth_c
while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
qeth_prepare_control_data(card, len, iob);
- if (IS_IPA(iob->data))
+ if (IS_IPA(iob->data)) {
+ cmd = __ipa_cmd(iob);
event_timeout = QETH_IPA_TIMEOUT;
- else
+ } else {
event_timeout = QETH_TIMEOUT;
+ }
+
timeout = jiffies + event_timeout;
QETH_CARD_TEXT(card, 6, "noirqpnd");
@@ -2111,9 +2114,8 @@ int qeth_send_control_data(struct qeth_c
/* we have only one long running ipassist, since we can ensure
process context of this command we can sleep */
- cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
- if ((cmd->hdr.command == IPA_CMD_SETIP) &&
- (cmd->hdr.prot_version == QETH_PROT_IPV4)) {
+ if (cmd && cmd->hdr.command == IPA_CMD_SETIP &&
+ cmd->hdr.prot_version == QETH_PROT_IPV4) {
if (!wait_event_timeout(reply->wait_q,
atomic_read(&reply->received), event_timeout))
goto time_err;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Chapman <[email protected]>
[ Upstream commit d02ba2a6110c530a32926af8ad441111774d2893 ]
pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.
Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.
ODEBUG: activate active (active state 1) object type: rcu_head hint: (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
debug_object_activate+0x38b/0x530
? debug_object_assert_init+0x3b0/0x3b0
? __mutex_unlock_slowpath+0x85/0x8b0
? pppol2tp_session_destruct+0x110/0x110
__call_rcu.constprop.66+0x39/0x890
? __call_rcu.constprop.66+0x39/0x890
call_rcu_sched+0x17/0x20
pppol2tp_release+0x2c7/0x440
? fcntl_setlk+0xca0/0xca0
? sock_alloc_file+0x340/0x340
sock_release+0x92/0x1e0
sock_close+0x1b/0x20
__fput+0x296/0x6e0
____fput+0x1a/0x20
task_work_run+0x127/0x1a0
do_exit+0x7f9/0x2ce0
? SYSC_connect+0x212/0x310
? mm_update_next_owner+0x690/0x690
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
do_group_exit+0x10d/0x330
? do_group_exit+0x330/0x330
SyS_exit_group+0x22/0x30
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41
Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_ppp.c | 52 +++++++++++++++++++++++++++-------------------------
1 file changed, 27 insertions(+), 25 deletions(-)
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -416,10 +416,28 @@ abort:
* Session (and tunnel control) socket create/destroy.
*****************************************************************************/
+static void pppol2tp_put_sk(struct rcu_head *head)
+{
+ struct pppol2tp_session *ps;
+
+ ps = container_of(head, typeof(*ps), rcu);
+ sock_put(ps->__sk);
+}
+
/* Called by l2tp_core when a session socket is being closed.
*/
static void pppol2tp_session_close(struct l2tp_session *session)
{
+ struct pppol2tp_session *ps;
+
+ ps = l2tp_session_priv(session);
+ mutex_lock(&ps->sk_lock);
+ ps->__sk = rcu_dereference_protected(ps->sk,
+ lockdep_is_held(&ps->sk_lock));
+ RCU_INIT_POINTER(ps->sk, NULL);
+ if (ps->__sk)
+ call_rcu(&ps->rcu, pppol2tp_put_sk);
+ mutex_unlock(&ps->sk_lock);
}
/* Really kill the session socket. (Called from sock_put() if
@@ -439,14 +457,6 @@ static void pppol2tp_session_destruct(st
}
}
-static void pppol2tp_put_sk(struct rcu_head *head)
-{
- struct pppol2tp_session *ps;
-
- ps = container_of(head, typeof(*ps), rcu);
- sock_put(ps->__sk);
-}
-
/* Called when the PPPoX socket (session) is closed.
*/
static int pppol2tp_release(struct socket *sock)
@@ -470,26 +480,17 @@ static int pppol2tp_release(struct socke
sock_orphan(sk);
sock->sk = NULL;
+ /* If the socket is associated with a session,
+ * l2tp_session_delete will call pppol2tp_session_close which
+ * will drop the session's ref on the socket.
+ */
session = pppol2tp_sock_to_session(sk);
-
- if (session != NULL) {
- struct pppol2tp_session *ps;
-
+ if (session) {
l2tp_session_delete(session);
-
- ps = l2tp_session_priv(session);
- mutex_lock(&ps->sk_lock);
- ps->__sk = rcu_dereference_protected(ps->sk,
- lockdep_is_held(&ps->sk_lock));
- RCU_INIT_POINTER(ps->sk, NULL);
- mutex_unlock(&ps->sk_lock);
- call_rcu(&ps->rcu, pppol2tp_put_sk);
-
- /* Rely on the sock_put() call at the end of the function for
- * dropping the reference held by pppol2tp_sock_to_session().
- * The last reference will be dropped by pppol2tp_put_sk().
- */
+ /* drop the ref obtained by pppol2tp_sock_to_session */
+ sock_put(sk);
}
+
release_sock(sk);
/* This will delete the session context via
@@ -786,6 +787,7 @@ static int pppol2tp_connect(struct socke
out_no_ppp:
/* This is how we get the session context from the socket. */
+ sock_hold(sk);
sk->sk_user_data = session;
rcu_assign_pointer(ps->sk, sk);
mutex_unlock(&ps->sk_lock);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Chapman <[email protected]>
[ Upstream commit 225eb26489d05c679a4c4197ffcb81c81e9dcaf4 ]
Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).
BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296
CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
dump_stack+0x101/0x157
? inet_shutdown+0x5d/0x1c0
print_address_description+0x78/0x260
? inet_shutdown+0x5d/0x1c0
kasan_report+0x240/0x360
__asan_load4+0x78/0x80
inet_shutdown+0x5d/0x1c0
? pppol2tp_show+0x80/0x80
pppol2tp_session_close+0x68/0xb0
l2tp_tunnel_closeall+0x199/0x210
? udp_v6_flush_pending_frames+0x90/0x90
l2tp_udp_encap_destroy+0x6b/0xc0
? l2tp_tunnel_del_work+0x2e0/0x2e0
udpv6_destroy_sock+0x8c/0x90
sk_common_release+0x47/0x190
udp_lib_close+0x15/0x20
inet_release+0x85/0xd0
inet6_release+0x43/0x60
sock_release+0x53/0x100
? sock_alloc_file+0x260/0x260
sock_close+0x1b/0x20
__fput+0x19f/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040
Allocated by task 8331:
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x144/0x3e0
sock_alloc_inode+0x22/0x130
alloc_inode+0x3d/0xf0
new_inode_pseudo+0x1c/0x90
sock_alloc+0x30/0x110
__sock_create+0xaa/0x4c0
SyS_socket+0xbe/0x130
do_syscall_64+0x128/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Freed by task 8314:
save_stack+0x43/0xd0
__kasan_slab_free+0x11a/0x170
kasan_slab_free+0xe/0x10
kmem_cache_free+0x88/0x2b0
sock_destroy_inode+0x49/0x50
destroy_inode+0x77/0xb0
evict+0x285/0x340
iput+0x429/0x530
dentry_unlink_inode+0x28c/0x2c0
__dentry_kill+0x1e3/0x2f0
dput.part.21+0x500/0x560
dput+0x24/0x30
__fput+0x2aa/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_ppp.c | 10 ----------
1 file changed, 10 deletions(-)
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -420,16 +420,6 @@ abort:
*/
static void pppol2tp_session_close(struct l2tp_session *session)
{
- struct sock *sk;
-
- BUG_ON(session->magic != L2TP_SESSION_MAGIC);
-
- sk = pppol2tp_session_get_sock(session);
- if (sk) {
- if (sk->sk_socket)
- inet_shutdown(sk->sk_socket, SEND_SHUTDOWN);
- sock_put(sk);
- }
}
/* Really kill the session socket. (Called from sock_put() if
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Chapman <[email protected]>
[ Upstream commit 28f5bfb819195ad9c2eb9486babe7b0e4efe925f ]
l2tp_tunnel_get walks the tunnel list to find a matching tunnel
instance and if a match is found, its refcount is increased before
returning the tunnel pointer. But when tunnel objects are destroyed,
they are on the tunnel list after their refcount hits zero. Fix this
by moving the code that removes the tunnel from the tunnel list from
the tunnel socket destructor into in the l2tp_tunnel_delete path,
before the tunnel refcount is decremented.
refcount_t: increment on 0; use-after-free.
WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50
Modules linked in:
CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:refcount_inc+0x47/0x50
RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286
RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8
RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50
R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004
FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0
Call Trace:
l2tp_tunnel_get+0x2dd/0x4e0
pppol2tp_connect+0x428/0x13c0
? pppol2tp_session_create+0x170/0x170
? __might_fault+0x115/0x1d0
? lock_downgrade+0x860/0x860
? __might_fault+0xe5/0x1d0
? security_socket_connect+0x8e/0xc0
SYSC_connect+0x1b6/0x310
? SYSC_bind+0x280/0x280
? __do_page_fault+0x5d1/0xca0
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
SyS_connect+0x29/0x30
? SyS_accept+0x40/0x40
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f403a42f259
RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259
RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004
RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000
R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000
R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040
Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49
Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue")
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Reported-and-tested-by: [email protected]
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1173,7 +1173,6 @@ EXPORT_SYMBOL_GPL(l2tp_xmit_skb);
static void l2tp_tunnel_destruct(struct sock *sk)
{
struct l2tp_tunnel *tunnel = l2tp_tunnel(sk);
- struct l2tp_net *pn;
if (tunnel == NULL)
goto end;
@@ -1196,12 +1195,6 @@ static void l2tp_tunnel_destruct(struct
sk->sk_destruct = tunnel->old_sk_destruct;
sk->sk_user_data = NULL;
- /* Remove the tunnel struct from the tunnel list */
- pn = l2tp_pernet(tunnel->l2tp_net);
- spin_lock_bh(&pn->l2tp_tunnel_list_lock);
- list_del_rcu(&tunnel->list);
- spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
-
/* Call the original destructor */
if (sk->sk_destruct)
(*sk->sk_destruct)(sk);
@@ -1280,6 +1273,7 @@ static void l2tp_tunnel_del_work(struct
del_work);
struct sock *sk = tunnel->sock;
struct socket *sock = sk->sk_socket;
+ struct l2tp_net *pn;
l2tp_tunnel_closeall(tunnel);
@@ -1293,6 +1287,12 @@ static void l2tp_tunnel_del_work(struct
}
}
+ /* Remove the tunnel struct from the tunnel list */
+ pn = l2tp_pernet(tunnel->l2tp_net);
+ spin_lock_bh(&pn->l2tp_tunnel_list_lock);
+ list_del_rcu(&tunnel->list);
+ spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
+
/* drop initial ref */
l2tp_tunnel_dec_refcount(tunnel);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ursula Braun <[email protected]>
[ Upstream commit 89271c65edd599207dd982007900506283c90ae3 ]
For a memory range/skb where the last byte falls onto a page boundary
(ie. 'end' is of the form xxx...xxx001), the PFN_UP() part of the
calculation currently doesn't round up to the next PFN due to an
off-by-one error.
Thus qeth believes that the skb occupies one page less than it
actually does, and may select a IO buffer that doesn't have enough spare
buffer elements to fit all of the skb's data.
HW detects this as a malformed buffer descriptor, and raises an
exception which then triggers device recovery.
Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count")
Signed-off-by: Ursula Braun <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/s390/net/qeth_core.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -836,7 +836,7 @@ struct qeth_trap_id {
*/
static inline int qeth_get_elements_for_range(addr_t start, addr_t end)
{
- return PFN_UP(end - 1) - PFN_DOWN(start);
+ return PFN_UP(end) - PFN_DOWN(start);
}
static inline int qeth_get_micros(void)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Chapman <[email protected]>
[ Upstream commit 76a6abdb2513ad4ea0ded55d2c66160491f2e848 ]
Previously, if a tunnel was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our tunnel will be detached anyway).
BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: __lock_acquire+0x263/0x1630
PGD 0 P4D 0
Oops: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129
Workqueue: l2tp l2tp_tunnel_del_work
RIP: 0010:__lock_acquire+0x263/0x1630
RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002
RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0
R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0
Call Trace:
? __lock_acquire+0xc77/0x1630
? console_trylock+0x11/0xa0
lock_acquire+0x117/0x230
? lock_sock_nested+0x3a/0xa0
_raw_spin_lock_bh+0x3a/0x50
? lock_sock_nested+0x3a/0xa0
lock_sock_nested+0x3a/0xa0
inet_shutdown+0x33/0xf0
l2tp_tunnel_del_work+0x60/0xef
process_one_work+0x1ea/0x5f0
? process_one_work+0x162/0x5f0
worker_thread+0x48/0x3e0
? trace_hardirqs_on+0xd/0x10
kthread+0x108/0x140
? process_one_work+0x5f0/0x5f0
? kthread_stop+0x2a0/0x2a0
ret_from_fork+0x24/0x30
Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85
68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c
24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f
RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70
CR2: 00000000000000a0
Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP")
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_core.c | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1336,17 +1336,10 @@ static void l2tp_tunnel_del_work(struct
sock = sk->sk_socket;
- /* If the tunnel socket was created by userspace, then go through the
- * inet layer to shut the socket down, and let userspace close it.
- * Otherwise, if we created the socket directly within the kernel, use
+ /* If the tunnel socket was created within the kernel, use
* the sk API to release it here.
- * In either case the tunnel resources are freed in the socket
- * destructor when the tunnel socket goes away.
*/
- if (tunnel->fd >= 0) {
- if (sock)
- inet_shutdown(sock, 2);
- } else {
+ if (tunnel->fd < 0) {
if (sock) {
kernel_sock_shutdown(sock, SHUT_RDWR);
sock_release(sock);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Song Liu <[email protected]>
[ Upstream commit 5c487bb9adddbc1d23433e09d2548759375c2b52 ]
tracepoint tcp_send_reset requires a full socket to work. However, it
may be called when in TCP_TIME_WAIT:
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb);
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
To avoid this problem, this patch checks the socket with sk_fullsock()
before calling trace_tcp_send_reset().
Fixes: c24b14c46bb8 ("tcp: add tracepoint trace_tcp_send_reset")
Signed-off-by: Song Liu <[email protected]>
Reviewed-by: Lawrence Brakmo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_ipv4.c | 3 ++-
net/ipv6/tcp_ipv6.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -705,7 +705,8 @@ static void tcp_v4_send_reset(const stru
*/
if (sk) {
arg.bound_dev_if = sk->sk_bound_dev_if;
- trace_tcp_send_reset(sk, skb);
+ if (sk_fullsock(sk))
+ trace_tcp_send_reset(sk, skb);
}
BUILD_BUG_ON(offsetof(struct sock, sk_bound_dev_if) !=
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -943,7 +943,8 @@ static void tcp_v6_send_reset(const stru
if (sk) {
oif = sk->sk_bound_dev_if;
- trace_tcp_send_reset(sk, skb);
+ if (sk_fullsock(sk))
+ trace_tcp_send_reset(sk, skb);
}
tcp_v6_send_response(sk, skb, seq, ack_seq, 0, 0, 0, oif, key, 1, 0, 0);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Chapman <[email protected]>
[ Upstream commit d00fa9adc528c1b0e64d532556764852df8bd7b9 ]
The tunnel socket tunnel->sock (struct sock) is accessed when
preparing a new ppp session on a tunnel at pppol2tp_session_init. If
the socket is closed by a thread while another is creating a new
session, the threads race. In pppol2tp_connect, the tunnel object may
be created if the pppol2tp socket is associated with the special
session_id 0 and the tunnel socket is looked up using the provided
fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel
socket to prevent it being destroyed during pppol2tp_connect since
this may itself may race with the socket being destroyed. Doing
sockfd_lookup in pppol2tp_connect isn't sufficient to prevent
tunnel->sock going away either because a given tunnel socket fd may be
reused between calls to pppol2tp_connect. Instead, have
l2tp_tunnel_create sock_hold the tunnel socket before it does
sockfd_put. This ensures that the tunnel's socket is always extant
while the tunnel object exists. Hold a ref on the socket until the
tunnel is destroyed and ensure that all tunnel destroy paths go
through a common function (l2tp_tunnel_delete) since this will do the
final sock_put to release the tunnel socket.
Since the tunnel's socket is now guaranteed to exist if the tunnel
exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel
to derive the tunnel from the socket since this is always
sk_user_data.
Also, sessions no longer sock_hold the tunnel socket since sessions
already hold a tunnel ref and the tunnel sock will not be freed until
the tunnel is freed. Removing these sock_holds in
l2tp_session_register avoids a possible sock leak in the
pppol2tp_connect error path if l2tp_session_register succeeds but
attaching a ppp channel fails. The pppol2tp_connect error path could
have been fixed instead and have the sock ref dropped when the session
is freed, but doing a sock_put of the tunnel socket when the session
is freed would require a new session_free callback. It is simpler to
just remove the sock_hold of the tunnel socket in
l2tp_session_register, now that the tunnel socket lifetime is
guaranteed.
Finally, some init code in l2tp_tunnel_create is reordered to ensure
that the new tunnel object's refcount is set and the tunnel socket ref
is taken before the tunnel socket destructor callbacks are set.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:pppol2tp_session_init+0x1d6/0x500
RSP: 0018:ffff88001377fb40 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d
RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228
RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002
R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000
R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76
FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0
Call Trace:
pppol2tp_connect+0xd18/0x13c0
? pppol2tp_session_create+0x170/0x170
? __might_fault+0x115/0x1d0
? lock_downgrade+0x860/0x860
? __might_fault+0xe5/0x1d0
? security_socket_connect+0x8e/0xc0
SYSC_connect+0x1b6/0x310
? SYSC_bind+0x280/0x280
? __do_page_fault+0x5d1/0xca0
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
SyS_connect+0x29/0x30
? SyS_accept+0x40/0x40
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7ffb3e376259
RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259
RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004
RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000
Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f
a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16
Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close")
Signed-off-by: James Chapman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/l2tp/l2tp_core.c | 117 ++++++++++++++-------------------------------------
net/l2tp/l2tp_core.h | 23 ----------
net/l2tp/l2tp_ip.c | 10 +---
net/l2tp/l2tp_ip6.c | 8 +--
4 files changed, 42 insertions(+), 116 deletions(-)
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -136,51 +136,6 @@ l2tp_session_id_hash_2(struct l2tp_net *
}
-/* Lookup the tunnel socket, possibly involving the fs code if the socket is
- * owned by userspace. A struct sock returned from this function must be
- * released using l2tp_tunnel_sock_put once you're done with it.
- */
-static struct sock *l2tp_tunnel_sock_lookup(struct l2tp_tunnel *tunnel)
-{
- int err = 0;
- struct socket *sock = NULL;
- struct sock *sk = NULL;
-
- if (!tunnel)
- goto out;
-
- if (tunnel->fd >= 0) {
- /* Socket is owned by userspace, who might be in the process
- * of closing it. Look the socket up using the fd to ensure
- * consistency.
- */
- sock = sockfd_lookup(tunnel->fd, &err);
- if (sock)
- sk = sock->sk;
- } else {
- /* Socket is owned by kernelspace */
- sk = tunnel->sock;
- sock_hold(sk);
- }
-
-out:
- return sk;
-}
-
-/* Drop a reference to a tunnel socket obtained via. l2tp_tunnel_sock_put */
-static void l2tp_tunnel_sock_put(struct sock *sk)
-{
- struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
- if (tunnel) {
- if (tunnel->fd >= 0) {
- /* Socket is owned by userspace */
- sockfd_put(sk->sk_socket);
- }
- sock_put(sk);
- }
- sock_put(sk);
-}
-
/* Session hash list.
* The session_id SHOULD be random according to RFC2661, but several
* L2TP implementations (Cisco and Microsoft) use incrementing
@@ -193,6 +148,13 @@ l2tp_session_id_hash(struct l2tp_tunnel
return &tunnel->session_hlist[hash_32(session_id, L2TP_HASH_BITS)];
}
+void l2tp_tunnel_free(struct l2tp_tunnel *tunnel)
+{
+ sock_put(tunnel->sock);
+ /* the tunnel is freed in the socket destructor */
+}
+EXPORT_SYMBOL(l2tp_tunnel_free);
+
/* Lookup a tunnel. A new reference is held on the returned tunnel. */
struct l2tp_tunnel *l2tp_tunnel_get(const struct net *net, u32 tunnel_id)
{
@@ -345,13 +307,11 @@ int l2tp_session_register(struct l2tp_se
}
l2tp_tunnel_inc_refcount(tunnel);
- sock_hold(tunnel->sock);
hlist_add_head_rcu(&session->global_hlist, g_head);
spin_unlock_bh(&pn->l2tp_session_hlist_lock);
} else {
l2tp_tunnel_inc_refcount(tunnel);
- sock_hold(tunnel->sock);
}
hlist_add_head(&session->hlist, head);
@@ -975,7 +935,7 @@ int l2tp_udp_encap_recv(struct sock *sk,
{
struct l2tp_tunnel *tunnel;
- tunnel = l2tp_sock_to_tunnel(sk);
+ tunnel = l2tp_tunnel(sk);
if (tunnel == NULL)
goto pass_up;
@@ -983,13 +943,10 @@ int l2tp_udp_encap_recv(struct sock *sk,
tunnel->name, skb->len);
if (l2tp_udp_recv_core(tunnel, skb, tunnel->recv_payload_hook))
- goto pass_up_put;
+ goto pass_up;
- sock_put(sk);
return 0;
-pass_up_put:
- sock_put(sk);
pass_up:
return 1;
}
@@ -1223,7 +1180,6 @@ static void l2tp_tunnel_destruct(struct
l2tp_info(tunnel, L2TP_MSG_CONTROL, "%s: closing...\n", tunnel->name);
-
/* Disable udp encapsulation */
switch (tunnel->encap) {
case L2TP_ENCAPTYPE_UDP:
@@ -1246,12 +1202,11 @@ static void l2tp_tunnel_destruct(struct
list_del_rcu(&tunnel->list);
spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
- tunnel->sock = NULL;
- l2tp_tunnel_dec_refcount(tunnel);
-
/* Call the original destructor */
if (sk->sk_destruct)
(*sk->sk_destruct)(sk);
+
+ kfree_rcu(tunnel, rcu);
end:
return;
}
@@ -1312,30 +1267,22 @@ EXPORT_SYMBOL_GPL(l2tp_tunnel_closeall);
/* Tunnel socket destroy hook for UDP encapsulation */
static void l2tp_udp_encap_destroy(struct sock *sk)
{
- struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
- if (tunnel) {
- l2tp_tunnel_closeall(tunnel);
- sock_put(sk);
- }
+ struct l2tp_tunnel *tunnel = l2tp_tunnel(sk);
+
+ if (tunnel)
+ l2tp_tunnel_delete(tunnel);
}
/* Workqueue tunnel deletion function */
static void l2tp_tunnel_del_work(struct work_struct *work)
{
- struct l2tp_tunnel *tunnel = NULL;
- struct socket *sock = NULL;
- struct sock *sk = NULL;
-
- tunnel = container_of(work, struct l2tp_tunnel, del_work);
+ struct l2tp_tunnel *tunnel = container_of(work, struct l2tp_tunnel,
+ del_work);
+ struct sock *sk = tunnel->sock;
+ struct socket *sock = sk->sk_socket;
l2tp_tunnel_closeall(tunnel);
- sk = l2tp_tunnel_sock_lookup(tunnel);
- if (!sk)
- goto out;
-
- sock = sk->sk_socket;
-
/* If the tunnel socket was created within the kernel, use
* the sk API to release it here.
*/
@@ -1346,8 +1293,10 @@ static void l2tp_tunnel_del_work(struct
}
}
- l2tp_tunnel_sock_put(sk);
-out:
+ /* drop initial ref */
+ l2tp_tunnel_dec_refcount(tunnel);
+
+ /* drop workqueue ref */
l2tp_tunnel_dec_refcount(tunnel);
}
@@ -1600,13 +1549,22 @@ int l2tp_tunnel_create(struct net *net,
sk->sk_user_data = tunnel;
}
+ /* Bump the reference count. The tunnel context is deleted
+ * only when this drops to zero. A reference is also held on
+ * the tunnel socket to ensure that it is not released while
+ * the tunnel is extant. Must be done before sk_destruct is
+ * set.
+ */
+ refcount_set(&tunnel->ref_count, 1);
+ sock_hold(sk);
+ tunnel->sock = sk;
+ tunnel->fd = fd;
+
/* Hook on the tunnel socket destructor so that we can cleanup
* if the tunnel socket goes away.
*/
tunnel->old_sk_destruct = sk->sk_destruct;
sk->sk_destruct = &l2tp_tunnel_destruct;
- tunnel->sock = sk;
- tunnel->fd = fd;
lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock");
sk->sk_allocation = GFP_ATOMIC;
@@ -1616,11 +1574,6 @@ int l2tp_tunnel_create(struct net *net,
/* Add tunnel to our list */
INIT_LIST_HEAD(&tunnel->list);
-
- /* Bump the reference count. The tunnel context is deleted
- * only when this drops to zero. Must be done before list insertion
- */
- refcount_set(&tunnel->ref_count, 1);
spin_lock_bh(&pn->l2tp_tunnel_list_lock);
list_add_rcu(&tunnel->list, &pn->l2tp_tunnel_list);
spin_unlock_bh(&pn->l2tp_tunnel_list_lock);
@@ -1661,8 +1614,6 @@ void l2tp_session_free(struct l2tp_sessi
if (tunnel) {
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
- sock_put(tunnel->sock);
- session->tunnel = NULL;
l2tp_tunnel_dec_refcount(tunnel);
}
--- a/net/l2tp/l2tp_core.h
+++ b/net/l2tp/l2tp_core.h
@@ -219,27 +219,8 @@ static inline void *l2tp_session_priv(st
return &session->priv[0];
}
-static inline struct l2tp_tunnel *l2tp_sock_to_tunnel(struct sock *sk)
-{
- struct l2tp_tunnel *tunnel;
-
- if (sk == NULL)
- return NULL;
-
- sock_hold(sk);
- tunnel = (struct l2tp_tunnel *)(sk->sk_user_data);
- if (tunnel == NULL) {
- sock_put(sk);
- goto out;
- }
-
- BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
-
-out:
- return tunnel;
-}
-
struct l2tp_tunnel *l2tp_tunnel_get(const struct net *net, u32 tunnel_id);
+void l2tp_tunnel_free(struct l2tp_tunnel *tunnel);
struct l2tp_session *l2tp_session_get(const struct net *net,
struct l2tp_tunnel *tunnel,
@@ -288,7 +269,7 @@ static inline void l2tp_tunnel_inc_refco
static inline void l2tp_tunnel_dec_refcount(struct l2tp_tunnel *tunnel)
{
if (refcount_dec_and_test(&tunnel->ref_count))
- kfree_rcu(tunnel, rcu);
+ l2tp_tunnel_free(tunnel);
}
/* Session reference counts. Incremented when code obtains a reference
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -234,17 +234,13 @@ static void l2tp_ip_close(struct sock *s
static void l2tp_ip_destroy_sock(struct sock *sk)
{
struct sk_buff *skb;
- struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+ struct l2tp_tunnel *tunnel = sk->sk_user_data;
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
kfree_skb(skb);
- if (tunnel) {
- l2tp_tunnel_closeall(tunnel);
- sock_put(sk);
- }
-
- sk_refcnt_debug_dec(sk);
+ if (tunnel)
+ l2tp_tunnel_delete(tunnel);
}
static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -248,16 +248,14 @@ static void l2tp_ip6_close(struct sock *
static void l2tp_ip6_destroy_sock(struct sock *sk)
{
- struct l2tp_tunnel *tunnel = l2tp_sock_to_tunnel(sk);
+ struct l2tp_tunnel *tunnel = sk->sk_user_data;
lock_sock(sk);
ip6_flush_pending_frames(sk);
release_sock(sk);
- if (tunnel) {
- l2tp_tunnel_closeall(tunnel);
- sock_put(sk);
- }
+ if (tunnel)
+ l2tp_tunnel_delete(tunnel);
inet6_destroy_sock(sk);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefano Brivio <[email protected]>
[ Upstream commit a8c6db1dfd1b1d18359241372bb204054f2c3174 ]
In fib_nh_match(), if output interface or gateway are passed in
the FIB configuration, we don't have to check next hops of
multipath routes to conclude whether we have a match or not.
However, we might still have routes with different realms
matching the same output interface and gateway configuration,
and this needs to cause the match to fail. Otherwise the first
route inserted in the FIB will match, regardless of the realms:
# ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
# ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
# ip route list table 1234
1.1.1.1 dev eth0 scope link realms 1/2
1.1.1.1 dev eth0 scope link realms 3/4
# ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
# ip route list table 1234
1.1.1.1 dev ens3 scope link realms 3/4
whereas route with realms 3/4 should have been deleted instead.
Explicitly check for fc_flow passed in the FIB configuration
(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
fail matching if it differs from nh_tclassid.
The handling of RTA_FLOW for multipath routes later in
fib_nh_match() is still needed, as we can have multiple RTA_FLOW
attributes that need to be matched against the tclassid of each
next hop.
v2: Check that fc_flow is set before discarding the match, so
that the user can still select the first matching rule by
not specifying any realm, as suggested by David Ahern.
Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Stefano Brivio <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/fib_semantics.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -646,6 +646,11 @@ int fib_nh_match(struct fib_config *cfg,
fi->fib_nh, cfg, extack))
return 1;
}
+#ifdef CONFIG_IP_ROUTE_CLASSID
+ if (cfg->fc_flow &&
+ cfg->fc_flow != fi->fib_nh->nh_tclassid)
+ return 1;
+#endif
if ((!cfg->fc_oif || cfg->fc_oif == fi->fib_nh->nh_oif) &&
(!cfg->fc_gw || cfg->fc_gw == fi->fib_nh->nh_gw))
return 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Lunn <[email protected]>
[ Upstream commit 9c2c2e62df3fa30fb13fbeb7512a4eede729383b ]
commit f5e64032a799 ("net: phy: fix resume handling") changes the
locking semantics for phy_resume() such that the caller now needs to
hold the phy mutex. Not all call sites were adopted to this new
semantic, resulting in warnings from the added
WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the
semantics, add a __phy_resume() and restore the old behavior of
phy_resume().
Reported-by: Heiner Kallweit <[email protected]>
Fixes: f5e64032a799 ("net: phy: fix resume handling")
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phy.c | 2 +-
drivers/net/phy/phy_device.c | 18 +++++++++++++-----
include/linux/phy.h | 1 +
3 files changed, 15 insertions(+), 6 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -841,7 +841,7 @@ void phy_start(struct phy_device *phydev
break;
case PHY_HALTED:
/* if phy was suspended, bring the physical link up again */
- phy_resume(phydev);
+ __phy_resume(phydev);
/* make sure interrupts are re-enabled for the PHY */
if (phy_interrupt_is_valid(phydev)) {
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -135,9 +135,7 @@ static int mdio_bus_phy_resume(struct de
if (!mdio_bus_phy_may_suspend(phydev))
goto no_resume;
- mutex_lock(&phydev->lock);
ret = phy_resume(phydev);
- mutex_unlock(&phydev->lock);
if (ret < 0)
return ret;
@@ -1028,9 +1026,7 @@ int phy_attach_direct(struct net_device
if (err)
goto error;
- mutex_lock(&phydev->lock);
phy_resume(phydev);
- mutex_unlock(&phydev->lock);
phy_led_triggers_register(phydev);
return err;
@@ -1156,7 +1152,7 @@ int phy_suspend(struct phy_device *phyde
}
EXPORT_SYMBOL(phy_suspend);
-int phy_resume(struct phy_device *phydev)
+int __phy_resume(struct phy_device *phydev)
{
struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
int ret = 0;
@@ -1173,6 +1169,18 @@ int phy_resume(struct phy_device *phydev
return ret;
}
+EXPORT_SYMBOL(__phy_resume);
+
+int phy_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ mutex_lock(&phydev->lock);
+ ret = __phy_resume(phydev);
+ mutex_unlock(&phydev->lock);
+
+ return ret;
+}
EXPORT_SYMBOL(phy_resume);
int phy_loopback(struct phy_device *phydev, bool enable)
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -819,6 +819,7 @@ void phy_device_remove(struct phy_device
int phy_init_hw(struct phy_device *phydev);
int phy_suspend(struct phy_device *phydev);
int phy_resume(struct phy_device *phydev);
+int __phy_resume(struct phy_device *phydev);
int phy_loopback(struct phy_device *phydev, bool enable);
struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
phy_interface_t interface);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Lendacky <[email protected]>
[ Upstream commit cfd092f2db8b4b6727e1c03ef68a7842e1023573 ]
After resuming from suspend, the PCI device support must re-enable the
interrupt setting so that interrupts are actually delivered.
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/amd/xgbe/xgbe-pci.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-pci.c
@@ -426,6 +426,8 @@ static int xgbe_pci_resume(struct pci_de
struct net_device *netdev = pdata->netdev;
int ret = 0;
+ XP_IOWRITE(pdata, XP_INT_EN, 0x1fffff);
+
pdata->lpm_ctrl &= ~MDIO_CTRL1_LPOWER;
XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, pdata->lpm_ctrl);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Buslov <[email protected]>
[ Upstream commit 9238e380e823a39983ee8d6b6ee8d1a9c4ba8a65 ]
If building match list or adding existing fg fails when
node is locked, function returned without unlocking it.
This happened if node version changed or adding existing fg
returned with EAGAIN after jumping to search_again_locked label.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1755,8 +1755,11 @@ search_again_locked:
/* Collect all fgs which has a matching match_criteria */
err = build_match_list(&match_head, ft, spec);
- if (err)
+ if (err) {
+ if (take_write)
+ up_write_ref_node(&ft->node);
return ERR_PTR(err);
+ }
if (!take_write)
up_read_ref_node(&ft->node);
@@ -1765,8 +1768,11 @@ search_again_locked:
dest_num, version);
free_match_list(&match_head);
if (!IS_ERR(rule) ||
- (PTR_ERR(rule) != -ENOENT && PTR_ERR(rule) != -EAGAIN))
+ (PTR_ERR(rule) != -ENOENT && PTR_ERR(rule) != -EAGAIN)) {
+ if (take_write)
+ up_write_ref_node(&ft->node);
return rule;
+ }
if (!take_write) {
nested_down_write_ref_node(&ft->node, FS_LOCK_GRANDPARENT);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
commit 0bd1ed4860d0f5f836aa8371797689a3779d1bf5 upstream.
The 'lend' parameter of truncate_inode_pages_range is required to be
inclusive, so follow the rule.
This patch fixes one memory corruption triggered by discard.
Cc: <[email protected]>
Cc: Dmitry Monakhov <[email protected]>
Fixes: 351499a172c0 ("block: Invalidate cache on discard v2")
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -225,7 +225,7 @@ static int blk_ioctl_discard(struct bloc
if (start + len > i_size_read(bdev->bd_inode))
return -EINVAL;
- truncate_inode_pages_range(mapping, start, start + len);
+ truncate_inode_pages_range(mapping, start, start + len - 1);
return blkdev_issue_discard(bdev, start >> 9, len >> 9,
GFP_KERNEL, flags);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit 945fd17ab6bab8a4d05da6c3170519fbcfe62ddb upstream.
The separation of the cpu_entry_area from the fixmap missed the fact that
on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in
initial_page_table by the previous synchronizations.
This results in suspend/resume failures because 32bit utilizes initial page
table for resume. The absence of the cpu_entry_area mapping results in a
triple fault, aka. insta reboot.
With PAE enabled this works by chance because the PGD entry which covers
the fixmap and other parts incindentally provides the cpu_entry_area
mapping as well.
Synchronize the initial page table after setting up the cpu entry
area. Instead of adding yet another copy of the same code, move it to a
function and invoke it from the various places.
It needs to be investigated if the existing calls in setup_arch() and
setup_per_cpu_areas() can be replaced by the later invocation from
setup_cpu_entry_areas(), but that's beyond the scope of this fix.
Fixes: 92a0f81d8957 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Woody Suwalski <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Woody Suwalski <[email protected]>
Cc: William Grant <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/pgtable_32.h | 1 +
arch/x86/include/asm/pgtable_64.h | 1 +
arch/x86/kernel/setup.c | 17 +++++------------
arch/x86/kernel/setup_percpu.c | 17 ++++-------------
arch/x86/mm/cpu_entry_area.c | 6 ++++++
arch/x86/mm/init_32.c | 15 +++++++++++++++
6 files changed, 32 insertions(+), 25 deletions(-)
--- a/arch/x86/include/asm/pgtable_32.h
+++ b/arch/x86/include/asm/pgtable_32.h
@@ -32,6 +32,7 @@ extern pmd_t initial_pg_pmd[];
static inline void pgtable_cache_init(void) { }
static inline void check_pgt_cache(void) { }
void paging_init(void);
+void sync_initial_page_table(void);
/*
* Define this if things work differently on an i386 and an i486:
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -28,6 +28,7 @@ extern pgd_t init_top_pgt[];
#define swapper_pg_dir init_top_pgt
extern void paging_init(void);
+static inline void sync_initial_page_table(void) { }
#define pte_ERROR(e) \
pr_err("%s:%d: bad pte %p(%016lx)\n", \
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1205,20 +1205,13 @@ void __init setup_arch(char **cmdline_p)
kasan_init();
-#ifdef CONFIG_X86_32
- /* sync back kernel address range */
- clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
- swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- KERNEL_PGD_PTRS);
-
/*
- * sync back low identity map too. It is used for example
- * in the 32-bit EFI stub.
+ * Sync back kernel address range.
+ *
+ * FIXME: Can the later sync in setup_cpu_entry_areas() replace
+ * this call?
*/
- clone_pgd_range(initial_page_table,
- swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-#endif
+ sync_initial_page_table();
tboot_probe();
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -287,24 +287,15 @@ void __init setup_per_cpu_areas(void)
/* Setup cpu initialized, callin, callout masks */
setup_cpu_local_masks();
-#ifdef CONFIG_X86_32
/*
* Sync back kernel address range again. We already did this in
* setup_arch(), but percpu data also needs to be available in
* the smpboot asm. We can't reliably pick up percpu mappings
* using vmalloc_fault(), because exception dispatch needs
* percpu data.
+ *
+ * FIXME: Can the later sync in setup_cpu_entry_areas() replace
+ * this call?
*/
- clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
- swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- KERNEL_PGD_PTRS);
-
- /*
- * sync back low identity map too. It is used for example
- * in the 32-bit EFI stub.
- */
- clone_pgd_range(initial_page_table,
- swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-#endif
+ sync_initial_page_table();
}
--- a/arch/x86/mm/cpu_entry_area.c
+++ b/arch/x86/mm/cpu_entry_area.c
@@ -163,4 +163,10 @@ void __init setup_cpu_entry_areas(void)
for_each_possible_cpu(cpu)
setup_cpu_entry_area(cpu);
+
+ /*
+ * This is the last essential update to swapper_pgdir which needs
+ * to be synchronized to initial_page_table on 32bit.
+ */
+ sync_initial_page_table();
}
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -453,6 +453,21 @@ static inline void permanent_kmaps_init(
}
#endif /* CONFIG_HIGHMEM */
+void __init sync_initial_page_table(void)
+{
+ clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
+ swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+ KERNEL_PGD_PTRS);
+
+ /*
+ * sync back low identity map too. It is used for example
+ * in the 32-bit EFI stub.
+ */
+ clone_pgd_range(initial_page_table,
+ swapper_pg_dir + KERNEL_PGD_BOUNDARY,
+ min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+}
+
void __init native_pagetable_init(void)
{
unsigned long pfn, va;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 1b12580af1d0677c3c3a19e35bfe5d59b03f737f ]
Now br_sysfs_if file flush doesn't have attr show. To read it will
cause kernel panic after users chmod u+r this file.
Xiong found this issue when running the commands:
ip link add br0 type bridge
ip link add type veth
ip link set veth0 master br0
chmod u+r /sys/devices/virtual/net/veth0/brport/flush
timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush
kernel crashed with NULL a pointer dereference call trace.
This patch is to fix it by return -EINVAL when brport_attr->show
is null, just the same as the check for brport_attr->store in
brport_store().
Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table")
Reported-by: Xiong Zhou <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_sysfs_if.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/bridge/br_sysfs_if.c
+++ b/net/bridge/br_sysfs_if.c
@@ -255,6 +255,9 @@ static ssize_t brport_show(struct kobjec
struct brport_attribute *brport_attr = to_brport_attr(attr);
struct net_bridge_port *p = to_brport(kobj);
+ if (!brport_attr->show)
+ return -EINVAL;
+
return brport_attr->show(p, buf);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Panceac <[email protected]>
commit 028091f82eefd5e84f81cef81a7673016ecbe78b upstream.
When the Intel Edison module is powered with 3.3V, the reboot command makes
the module stuck. If the module is powered at a greater voltage, like 4.4V
(as the Edison Mini Breakout board does), reboot works OK.
The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the
SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel
is only sent when explicitely selected on the kernel command line.
Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent
of the power supply voltage.
[ tglx: Massaged changelog ]
Fixes: bda7b072de99 ("x86/platform/intel-mid: Implement power off sequence")
Signed-off-by: Sebastian Panceac <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/platform/intel-mid/intel-mid.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -79,7 +79,7 @@ static void intel_mid_power_off(void)
static void intel_mid_reboot(void)
{
- intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+ intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
}
static unsigned long __init intel_mid_calibrate_tsc(void)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
commit d9c10e5b8863cfb6886d1640386455075c6e979d upstream.
Commit e864f39569f4 "fs: add RWF_DSYNC aand RWF_SYNC" added additional
way for direct IO to become synchronous and thus trigger fsync from the
IO completion handler. Then commit 9830f4be159b "fs: Use RWF_* flags for
AIO operations" allowed these flags to be set for AIO as well. However
that commit forgot to update the condition checking whether the IO
completion handling should be defered to a workqueue and thus AIO DIO
with RWF_[D]SYNC set will call fsync() from IRQ context resulting in
sleep in atomic.
Fix the problem by checking directly iocb flags (the same way as it is
done in dio_complete()) instead of checking all conditions that could
lead to IO being synchronous.
CC: Christoph Hellwig <[email protected]>
CC: Goldwyn Rodrigues <[email protected]>
CC: [email protected]
Reported-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Fixes: 9830f4be159b29399d107bffb99e0132bc5aedd4
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/direct-io.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1252,8 +1252,7 @@ do_blockdev_direct_IO(struct kiocb *iocb
*/
if (dio->is_async && iov_iter_rw(iter) == WRITE) {
retval = 0;
- if ((iocb->ki_filp->f_flags & O_DSYNC) ||
- IS_SYNC(iocb->ki_filp->f_mapping->host))
+ if (iocb->ki_flags & IOCB_DSYNC)
retval = dio_set_defer_completion(dio);
else if (!dio->inode->i_sb->s_dio_done_wq) {
/*
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Juergen Gross <[email protected]>
commit 71c208dd54ab971036d83ff6d9837bae4976e623 upstream.
Older Xen versions (4.5 and before) might have problems migrating pv
guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before
suspending zero that MSR and restore it after being resumed.
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Jan Beulich <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/suspend.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -1,12 +1,15 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/types.h>
#include <linux/tick.h>
+#include <linux/percpu-defs.h>
#include <xen/xen.h>
#include <xen/interface/xen.h>
#include <xen/grant_table.h>
#include <xen/events.h>
+#include <asm/cpufeatures.h>
+#include <asm/msr-index.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/page.h>
#include <asm/fixmap.h>
@@ -15,6 +18,8 @@
#include "mmu.h"
#include "pmu.h"
+static DEFINE_PER_CPU(u64, spec_ctrl);
+
void xen_arch_pre_suspend(void)
{
xen_save_time_memory_area();
@@ -35,6 +40,9 @@ void xen_arch_post_suspend(int cancelled
static void xen_vcpu_notify_restore(void *data)
{
+ if (xen_pv_domain() && boot_cpu_has(X86_FEATURE_SPEC_CTRL))
+ wrmsrl(MSR_IA32_SPEC_CTRL, this_cpu_read(spec_ctrl));
+
/* Boot processor notified via generic timekeeping_resume() */
if (smp_processor_id() == 0)
return;
@@ -44,7 +52,15 @@ static void xen_vcpu_notify_restore(void
static void xen_vcpu_notify_suspend(void *data)
{
+ u64 tmp;
+
tick_suspend_local();
+
+ if (xen_pv_domain() && boot_cpu_has(X86_FEATURE_SPEC_CTRL)) {
+ rdmsrl(MSR_IA32_SPEC_CTRL, tmp);
+ this_cpu_write(spec_ctrl, tmp);
+ wrmsrl(MSR_IA32_SPEC_CTRL, 0);
+ }
}
void xen_arch_resume(void)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eran Ben Elisha <[email protected]>
[ Upstream commit f600c6088018d1dbc5777d18daa83660f7ea4a64 ]
Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control
segment of the WQE. It assumes that the linear part contains at least
MLX5E_MIN_INLINE bytes, which can be wrong.
Cited commit verified that driver will not copy more bytes into the
inline header part that the actual size of the packet. Re-factor this
check to make sure we do not exceed the linear part as well.
This fix is aligned with the current driver's assumption that the entire
L2 will be present in the linear part of the SKB.
Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets")
Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -176,7 +176,7 @@ static inline u16 mlx5e_calc_min_inline(
default:
hlen = mlx5e_skb_l2_header_offset(skb);
}
- return min_t(u16, hlen, skb->len);
+ return min_t(u16, hlen, skb_headlen(skb));
}
static inline void mlx5e_tx_skb_pull_inline(unsigned char **skb_data,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Kodanev <[email protected]>
[ Upstream commit 957d761cf91cdbb175ad7d8f5472336a4d54dbf2 ]
When going through the bind address list in sctp_v6_get_dst() and
the previously found address is better ('matchlen > bmatchlen'),
the code continues to the next iteration without releasing currently
held destination.
Fix it by releasing 'bdst' before continue to the next iteration, and
instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
move the already existed one right after ip6_dst_lookup_flow(), i.e. we
shouldn't proceed further if we get an error for the route lookup.
Fixes: dbc2b5e9a09e ("sctp: fix src address selection if using secondary addresses for ipv6")
Signed-off-by: Alexey Kodanev <[email protected]>
Acked-by: Neil Horman <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/ipv6.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -326,8 +326,10 @@ static void sctp_v6_get_dst(struct sctp_
final_p = fl6_update_dst(fl6, rcu_dereference(np->opt), &final);
bdst = ip6_dst_lookup_flow(sk, fl6, final_p);
- if (!IS_ERR(bdst) &&
- ipv6_chk_addr(dev_net(bdst->dev),
+ if (IS_ERR(bdst))
+ continue;
+
+ if (ipv6_chk_addr(dev_net(bdst->dev),
&laddr->a.v6.sin6_addr, bdst->dev, 1)) {
if (!IS_ERR_OR_NULL(dst))
dst_release(dst);
@@ -336,8 +338,10 @@ static void sctp_v6_get_dst(struct sctp_
}
bmatchlen = sctp_v6_addr_match_len(daddr, &laddr->a);
- if (matchlen > bmatchlen)
+ if (matchlen > bmatchlen) {
+ dst_release(bdst);
continue;
+ }
if (!IS_ERR_OR_NULL(dst))
dst_release(dst);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ido Schimmel <[email protected]>
[ Upstream commit 0e5a82efda872c2469c210957d7d4161ef8f4391 ]
When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.
However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().
Fix this by using refcount_set() on a newly created master VLAN entry.
Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_vlan.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -168,6 +168,8 @@ static struct net_bridge_vlan *br_vlan_g
masterv = br_vlan_find(vg, vid);
if (WARN_ON(!masterv))
return NULL;
+ refcount_set(&masterv->refcnt, 1);
+ return masterv;
}
refcount_inc(&masterv->refcnt);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko <[email protected]>
[ Upstream commit 0f2d2b2736b08dafa3bde31d048750fbc8df3a31 ]
Since mlxsw_sp_fib_create() and mlxsw_sp_mr_table_create()
use ERR_PTR macro to propagate int err through return of a pointer,
the return value is not NULL in case of failure. So if one
of the calls fails, one of vr->fib4, vr->fib6 or vr->mr4_table
is not NULL and mlxsw_sp_vr_is_used wrongly assumes
that vr is in use which leads to crash like following one:
[ 1293.949291] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c9
[ 1293.952729] IP: mlxsw_sp_mr_table_flush+0x15/0x70 [mlxsw_spectrum]
Fix this by using local variables to hold the pointers and set vr->*
only in case everything went fine.
Fixes: 76610ebbde18 ("mlxsw: spectrum_router: Refactor virtual router handling")
Fixes: a3d9bc506d64 ("mlxsw: spectrum_router: Extend virtual routers with IPv6 support")
Fixes: d42b0965b1d4 ("mlxsw: spectrum_router: Add multicast routes notification handling functionality")
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 32 ++++++++++--------
1 file changed, 18 insertions(+), 14 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
@@ -737,6 +737,9 @@ static struct mlxsw_sp_vr *mlxsw_sp_vr_c
u32 tb_id,
struct netlink_ext_ack *extack)
{
+ struct mlxsw_sp_mr_table *mr4_table;
+ struct mlxsw_sp_fib *fib4;
+ struct mlxsw_sp_fib *fib6;
struct mlxsw_sp_vr *vr;
int err;
@@ -745,29 +748,30 @@ static struct mlxsw_sp_vr *mlxsw_sp_vr_c
NL_SET_ERR_MSG(extack, "spectrum: Exceeded number of supported virtual routers");
return ERR_PTR(-EBUSY);
}
- vr->fib4 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV4);
- if (IS_ERR(vr->fib4))
- return ERR_CAST(vr->fib4);
- vr->fib6 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV6);
- if (IS_ERR(vr->fib6)) {
- err = PTR_ERR(vr->fib6);
+ fib4 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV4);
+ if (IS_ERR(fib4))
+ return ERR_CAST(fib4);
+ fib6 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV6);
+ if (IS_ERR(fib6)) {
+ err = PTR_ERR(fib6);
goto err_fib6_create;
}
- vr->mr4_table = mlxsw_sp_mr_table_create(mlxsw_sp, vr->id,
- MLXSW_SP_L3_PROTO_IPV4);
- if (IS_ERR(vr->mr4_table)) {
- err = PTR_ERR(vr->mr4_table);
+ mr4_table = mlxsw_sp_mr_table_create(mlxsw_sp, vr->id,
+ MLXSW_SP_L3_PROTO_IPV4);
+ if (IS_ERR(mr4_table)) {
+ err = PTR_ERR(mr4_table);
goto err_mr_table_create;
}
+ vr->fib4 = fib4;
+ vr->fib6 = fib6;
+ vr->mr4_table = mr4_table;
vr->tb_id = tb_id;
return vr;
err_mr_table_create:
- mlxsw_sp_fib_destroy(vr->fib6);
- vr->fib6 = NULL;
+ mlxsw_sp_fib_destroy(fib6);
err_fib6_create:
- mlxsw_sp_fib_destroy(vr->fib4);
- vr->fib4 = NULL;
+ mlxsw_sp_fib_destroy(fib4);
return ERR_PTR(err);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit 27af86bb038d9c8b8066cd17854ddaf2ea92bce1 ]
The pr_err in sctp_hash_transport was supposed to report a sctp bug
for using rhashtable/rhlist.
The err '-EEXIST' introduced in Commit cd2b70875058 ("sctp: check
duplicate node before inserting a new transport") doesn't belong
to that case.
So just return -EEXIST back without pr_err any kmsg.
Fixes: cd2b70875058 ("sctp: check duplicate node before inserting a new transport")
Reported-by: Wei Chen <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/input.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -897,15 +897,12 @@ int sctp_hash_transport(struct sctp_tran
rhl_for_each_entry_rcu(transport, tmp, list, node)
if (transport->asoc->ep == t->asoc->ep) {
rcu_read_unlock();
- err = -EEXIST;
- goto out;
+ return -EEXIST;
}
rcu_read_unlock();
err = rhltable_insert_key(&sctp_transport_hashtable, &arg,
&t->node, sctp_hash_params);
-
-out:
if (err)
pr_err_once("insert transport fail, errno %d\n", err);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Ahern <[email protected]>
[ Upstream commit 1fe4b1184c2ae2bfbf9e8b14c9c0c1945c98f205 ]
The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.
Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel <[email protected]>
Signed-off-by: David Ahern <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/route.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1832,6 +1832,8 @@ int fib_multipath_hash(const struct fib_
return skb_get_hash_raw(skb) >> 1;
memset(&hash_keys, 0, sizeof(hash_keys));
skb_flow_dissect_flow_keys(skb, &keys, flag);
+
+ hash_keys.control.addr_type = FLOW_DISSECTOR_KEY_IPV4_ADDRS;
hash_keys.addrs.v4addrs.src = keys.addrs.v4addrs.src;
hash_keys.addrs.v4addrs.dst = keys.addrs.v4addrs.dst;
hash_keys.ports.src = keys.ports.src;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ivan Vecera <[email protected]>
[ Upstream commit eb53f7af6f15285e2f6ada97285395343ce9f433 ]
The following sequence is currently broken:
# tc qdisc add dev foo ingress
# tc filter replace dev foo protocol all ingress \
u32 match u8 0 0 action mirred egress mirror dev bar1
# tc filter replace dev foo protocol all ingress \
handle 800::800 pref 49152 \
u32 match u8 0 0 action mirred egress mirror dev bar2
Error: cls_u32: Key node flags do not match passed flags.
We have an error talking to the kernel, -1
The error comes from u32_change() when comparing new and
existing flags. The existing ones always contains one of
TCA_CLS_FLAGS_{,NOT}_IN_HW flag depending on offloading state.
These flags cannot be passed from userspace so the condition
(n->flags != flags) in u32_change() always fails.
Fix the condition so the flags TCA_CLS_FLAGS_NOT_IN_HW and
TCA_CLS_FLAGS_IN_HW are not taken into account.
Fixes: 24d3dc6d27ea ("net/sched: cls_u32: Reflect HW offload status")
Signed-off-by: Ivan Vecera <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_u32.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -928,7 +928,8 @@ static int u32_change(struct net *net, s
if (TC_U32_KEY(n->handle) == 0)
return -EINVAL;
- if (n->flags != flags)
+ if ((n->flags ^ flags) &
+ ~(TCA_CLS_FLAGS_IN_HW | TCA_CLS_FLAGS_NOT_IN_HW))
return -EINVAL;
new = u32_init_knode(tp, n);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Inbar Karmy <[email protected]>
[ Upstream commit ef7a3518f7dd4f4cf5e5b5358c93d1eb78df28fb ]
When GRO is off, the transport header pointer in sk_buff is
initialized to network's header.
To find the udp header, instead of using udp_hdr() which assumes
skb_network_header was set, manually calculate the udp header offset.
Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: Inbar Karmy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_selftest.c
@@ -216,7 +216,8 @@ mlx5e_test_loopback_validate(struct sk_b
if (iph->protocol != IPPROTO_UDP)
goto out;
- udph = udp_hdr(skb);
+ /* Don't assume skb_transport_header() was set */
+ udph = (struct udphdr *)((u8 *)iph + 4 * iph->ihl);
if (udph->dest != htons(9))
goto out;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit a5f7add332b4ea6d4b9480971b3b0f5e66466ae9 ]
pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.
I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.
Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.
Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/gen_estimator.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -66,6 +66,7 @@ struct net_rate_estimator {
static void est_fetch_counters(struct net_rate_estimator *e,
struct gnet_stats_basic_packed *b)
{
+ memset(b, 0, sizeof(*b));
if (e->stats_lock)
spin_lock(e->stats_lock);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 230f5a8969d8345fc9bbe3683f068246cf1be4b8 upstream.
Gerd reports that ->i_mode may contain other bits besides S_IFCHR. Use
S_ISCHR() instead. Otherwise, get_user_pages_longterm() may fail on
device-dax instances when those are meant to be explicitly allowed.
Fixes: 2bb6d2837083 ("mm: introduce get_user_pages_longterm")
Cc: <[email protected]>
Reported-by: Gerd Rausch <[email protected]>
Acked-by: Jane Chu <[email protected]>
Reported-by: Haozhong Zhang <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/fs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3204,7 +3204,7 @@ static inline bool vma_is_fsdax(struct v
if (!vma_is_dax(vma))
return false;
inode = file_inode(vma->vm_file);
- if (inode->i_mode == S_IFCHR)
+ if (S_ISCHR(inode->i_mode))
return false; /* device-dax */
return true;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tonghao Zhang <[email protected]>
[ Upstream commit a61a86f8db92923a2a4c857c49a795bcae754497 ]
The SK_MEM_QUANTUM was changed from PAGE_SIZE to 4096. And the
tcp_wmem/tcp_rmem min default values are 4096.
Fixes: bd68a2a854ad ("net: set SK_MEM_QUANTUM to 4096")
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Tonghao Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Documentation/networking/ip-sysctl.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -508,7 +508,7 @@ tcp_rmem - vector of 3 INTEGERs: min, de
min: Minimal size of receive buffer used by TCP sockets.
It is guaranteed to each TCP socket, even under moderate memory
pressure.
- Default: 1 page
+ Default: 4K
default: initial size of receive buffer used by TCP sockets.
This value overrides net.core.rmem_default used by other protocols.
@@ -666,7 +666,7 @@ tcp_window_scaling - BOOLEAN
tcp_wmem - vector of 3 INTEGERs: min, default, max
min: Amount of memory reserved for send buffers for TCP sockets.
Each TCP socket has rights to use it due to fact of its birth.
- Default: 1 page
+ Default: 4K
default: initial size of send buffer used by TCP sockets. This
value overrides net.core.wmem_default used by other protocols.
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Howells <[email protected]>
[ Upstream commit 93c62c45ed5fad1b87e3a45835b251cd68de9c46 ]
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not. Fix it so that
it does.
Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.
Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/rxrpc/output.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/rxrpc/output.c
+++ b/net/rxrpc/output.c
@@ -445,7 +445,7 @@ send_fragmentable:
(char *)&opt, sizeof(opt));
if (ret == 0) {
ret = kernel_sendmsg(conn->params.local->socket, &msg,
- iov, 1, iov[0].iov_len);
+ iov, 2, len);
opt = IPV6_PMTUDISC_DO;
kernel_setsockopt(conn->params.local->socket,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Lesokhin <[email protected]>
[ Upstream commit 808cf9e38cd7923036a99f459ccc8cf2955e47af ]
Avoid SKB coalescing if eor bit is set in one of the relevant
SKBs.
Fixes: c134ecb87817 ("tcp: Make use of MSG_EOR in tcp_sendmsg")
Signed-off-by: Ilya Lesokhin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/tcp_output.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2026,6 +2026,24 @@ static inline void tcp_mtu_check_reprobe
}
}
+static bool tcp_can_coalesce_send_queue_head(struct sock *sk, int len)
+{
+ struct sk_buff *skb, *next;
+
+ skb = tcp_send_head(sk);
+ tcp_for_write_queue_from_safe(skb, next, sk) {
+ if (len <= skb->len)
+ break;
+
+ if (unlikely(TCP_SKB_CB(skb)->eor))
+ return false;
+
+ len -= skb->len;
+ }
+
+ return true;
+}
+
/* Create a new MTU probe if we are ready.
* MTU probe is regularly attempting to increase the path MTU by
* deliberately sending larger packets. This discovers routing
@@ -2098,6 +2116,9 @@ static int tcp_mtu_probe(struct sock *sk
return 0;
}
+ if (!tcp_can_coalesce_send_queue_head(sk, probe_size))
+ return -1;
+
/* We're allowed to probe. Build it now. */
nskb = sk_stream_alloc_skb(sk, probe_size, GFP_ATOMIC, false);
if (!nskb)
@@ -2133,6 +2154,10 @@ static int tcp_mtu_probe(struct sock *sk
/* We've eaten all the data from this skb.
* Throw it away. */
TCP_SKB_CB(nskb)->tcp_flags |= TCP_SKB_CB(skb)->tcp_flags;
+ /* If this is the last SKB we copy and eor is set
+ * we need to propagate it to the new skb.
+ */
+ TCP_SKB_CB(nskb)->eor = TCP_SKB_CB(skb)->eor;
tcp_unlink_write_queue(skb, sk);
sk_wmem_free_skb(sk, skb);
} else {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiner Kallweit <[email protected]>
[ Upstream commit 08f5138512180a479ce6b9d23b825c9f4cd3be77 ]
This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
also PHY state changes and we should do what the symbol says.
Fixes: 84a527a41f38 ("net: phylib: fix interrupts re-enablement in phy_start")
Signed-off-by: Heiner Kallweit <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -844,7 +844,7 @@ void phy_start(struct phy_device *phydev
phy_resume(phydev);
/* make sure interrupts are re-enabled for the PHY */
- if (phydev->irq != PHY_POLL) {
+ if (phy_interrupt_is_valid(phydev)) {
err = phy_enable_interrupts(phydev);
if (err < 0)
break;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gal Pressman <[email protected]>
[ Upstream commit 2f0db87901698cd73d828cc6fb1957b8916fc911 ]
When allocating a drop rq, no numa node is explicitly set which means
allocations are done on node zero. This is not necessarily the nearest
numa node to the HCA, and even worse, might even be a memoryless numa
node.
Choose the numa_node given to us by the pci device in order to properly
allocate the coherent dma memory instead of assuming zero is valid.
Fixes: 556dd1b9c313 ("net/mlx5e: Set drop RQ's necessary parameters only")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1911,13 +1911,16 @@ static void mlx5e_build_rq_param(struct
param->wq.linear = 1;
}
-static void mlx5e_build_drop_rq_param(struct mlx5e_rq_param *param)
+static void mlx5e_build_drop_rq_param(struct mlx5_core_dev *mdev,
+ struct mlx5e_rq_param *param)
{
void *rqc = param->rqc;
void *wq = MLX5_ADDR_OF(rqc, rqc, wq);
MLX5_SET(wq, wq, wq_type, MLX5_WQ_TYPE_LINKED_LIST);
MLX5_SET(wq, wq, log_wq_stride, ilog2(sizeof(struct mlx5e_rx_wqe)));
+
+ param->wq.buf_numa_node = dev_to_node(&mdev->pdev->dev);
}
static void mlx5e_build_sq_param_common(struct mlx5e_priv *priv,
@@ -2774,6 +2777,9 @@ static int mlx5e_alloc_drop_cq(struct ml
struct mlx5e_cq *cq,
struct mlx5e_cq_param *param)
{
+ param->wq.buf_numa_node = dev_to_node(&mdev->pdev->dev);
+ param->wq.db_numa_node = dev_to_node(&mdev->pdev->dev);
+
return mlx5e_alloc_cq_common(mdev, param, cq);
}
@@ -2785,7 +2791,7 @@ static int mlx5e_open_drop_rq(struct mlx
struct mlx5e_cq *cq = &drop_rq->cq;
int err;
- mlx5e_build_drop_rq_param(&rq_param);
+ mlx5e_build_drop_rq_param(mdev, &rq_param);
err = mlx5e_alloc_drop_cq(mdev, cq, &cq_param);
if (err)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gal Pressman <[email protected]>
[ Upstream commit 8babd44d2079079f9d5a4aca7005aed80236efe0 ]
When receiving an LRO packet, the checksum field is set by the hardware
to the checksum of the first coalesced packet. Obviously, this checksum
is not valid for the merged LRO packet and should be fixed. We can use
the CQE checksum which covers the checksum of the entire merged packet
TCP payload to help us calculate the checksum incrementally.
Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled
and watching nstat checksum error counters (in addition to the obvious
bandwidth drop caused by checksum errors).
This bug is usually "hidden" since LRO packets would go through the
CHECKSUM_UNNECESSARY flow which does not validate the packet checksum.
It's important to note that previous to this patch, LRO packets provided
with CHECKSUM_UNNECESSARY are indeed packets with a correct validated
checksum (even though the checksum inside the TCP header is incorrect),
since the hardware LRO aggregation is terminated upon receiving a packet
with bad checksum.
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Gal Pressman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 47 +++++++++++++++++-------
1 file changed, 34 insertions(+), 13 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -36,6 +36,7 @@
#include <linux/tcp.h>
#include <linux/bpf_trace.h>
#include <net/busy_poll.h>
+#include <net/ip6_checksum.h>
#include "en.h"
#include "en_tc.h"
#include "eswitch.h"
@@ -547,20 +548,33 @@ bool mlx5e_post_rx_mpwqes(struct mlx5e_r
return true;
}
+static void mlx5e_lro_update_tcp_hdr(struct mlx5_cqe64 *cqe, struct tcphdr *tcp)
+{
+ u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
+ u8 tcp_ack = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
+ (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
+
+ tcp->check = 0;
+ tcp->psh = get_cqe_lro_tcppsh(cqe);
+
+ if (tcp_ack) {
+ tcp->ack = 1;
+ tcp->ack_seq = cqe->lro_ack_seq_num;
+ tcp->window = cqe->lro_tcp_win;
+ }
+}
+
static void mlx5e_lro_update_hdr(struct sk_buff *skb, struct mlx5_cqe64 *cqe,
u32 cqe_bcnt)
{
struct ethhdr *eth = (struct ethhdr *)(skb->data);
struct tcphdr *tcp;
int network_depth = 0;
+ __wsum check;
__be16 proto;
u16 tot_len;
void *ip_p;
- u8 l4_hdr_type = get_cqe_l4_hdr_type(cqe);
- u8 tcp_ack = (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_NO_DATA) ||
- (l4_hdr_type == CQE_L4_HDR_TYPE_TCP_ACK_AND_DATA);
-
proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth);
tot_len = cqe_bcnt - network_depth;
@@ -577,23 +591,30 @@ static void mlx5e_lro_update_hdr(struct
ipv4->check = 0;
ipv4->check = ip_fast_csum((unsigned char *)ipv4,
ipv4->ihl);
+
+ mlx5e_lro_update_tcp_hdr(cqe, tcp);
+ check = csum_partial(tcp, tcp->doff * 4,
+ csum_unfold((__force __sum16)cqe->check_sum));
+ /* Almost done, don't forget the pseudo header */
+ tcp->check = csum_tcpudp_magic(ipv4->saddr, ipv4->daddr,
+ tot_len - sizeof(struct iphdr),
+ IPPROTO_TCP, check);
} else {
+ u16 payload_len = tot_len - sizeof(struct ipv6hdr);
struct ipv6hdr *ipv6 = ip_p;
tcp = ip_p + sizeof(struct ipv6hdr);
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
ipv6->hop_limit = cqe->lro_min_ttl;
- ipv6->payload_len = cpu_to_be16(tot_len -
- sizeof(struct ipv6hdr));
- }
+ ipv6->payload_len = cpu_to_be16(payload_len);
- tcp->psh = get_cqe_lro_tcppsh(cqe);
-
- if (tcp_ack) {
- tcp->ack = 1;
- tcp->ack_seq = cqe->lro_ack_seq_num;
- tcp->window = cqe->lro_tcp_win;
+ mlx5e_lro_update_tcp_hdr(cqe, tcp);
+ check = csum_partial(tcp, tcp->doff * 4,
+ csum_unfold((__force __sum16)cqe->check_sum));
+ /* Almost done, don't forget the pseudo header */
+ tcp->check = csum_ipv6_magic(&ipv6->saddr, &ipv6->daddr, payload_len,
+ IPPROTO_TCP, check);
}
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shalom Toledo <[email protected]>
[ Upstream commit 0a8a1bf17e3af34f1f8d2368916a6327f8b3bfd5 ]
Until now, we assumed that in case of error when adding FDB entries, the
write operation will fail, but this is not the case. Instead, we need to
check that the number of entries reported in the response is equal to
the number of entries specified in the request.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Reported-by: Ido Schimmel <[email protected]>
Signed-off-by: Shalom Toledo <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 29 +++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1203,6 +1203,7 @@ static int __mlxsw_sp_port_fdb_uc_op(str
bool dynamic)
{
char *sfd_pl;
+ u8 num_rec;
int err;
sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1212,9 +1213,16 @@ static int __mlxsw_sp_port_fdb_uc_op(str
mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
mac, fid, action, local_port);
+ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
- kfree(sfd_pl);
+ if (err)
+ goto out;
+
+ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+ err = -EBUSY;
+out:
+ kfree(sfd_pl);
return err;
}
@@ -1239,6 +1247,7 @@ static int mlxsw_sp_port_fdb_uc_lag_op(s
bool adding, bool dynamic)
{
char *sfd_pl;
+ u8 num_rec;
int err;
sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1249,9 +1258,16 @@ static int mlxsw_sp_port_fdb_uc_lag_op(s
mlxsw_reg_sfd_uc_lag_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
mac, fid, MLXSW_REG_SFD_REC_ACTION_NOP,
lag_vid, lag_id);
+ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
- kfree(sfd_pl);
+ if (err)
+ goto out;
+ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+ err = -EBUSY;
+
+out:
+ kfree(sfd_pl);
return err;
}
@@ -1296,6 +1312,7 @@ static int mlxsw_sp_port_mdb_op(struct m
u16 fid, u16 mid_idx, bool adding)
{
char *sfd_pl;
+ u8 num_rec;
int err;
sfd_pl = kmalloc(MLXSW_REG_SFD_LEN, GFP_KERNEL);
@@ -1305,7 +1322,15 @@ static int mlxsw_sp_port_mdb_op(struct m
mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
mlxsw_reg_sfd_mc_pack(sfd_pl, 0, addr, fid,
MLXSW_REG_SFD_REC_ACTION_NOP, mid_idx);
+ num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
+ if (err)
+ goto out;
+
+ if (num_rec != mlxsw_reg_sfd_num_rec_get(sfd_pl))
+ err = -EBUSY;
+
+out:
kfree(sfd_pl);
return err;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Kodanev <[email protected]>
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ]
Since UDP-Lite is always using checksum, the following path is
triggered when calculating pseudo header for it:
udp4_csum_init() or udp6_csum_init()
skb_checksum_init_zero_check()
__skb_checksum_validate_complete()
The problem can appear if skb->len is less than CHECKSUM_BREAK. In
this particular case __skb_checksum_validate_complete() also invokes
__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
that covers only part of a packet, the function will return bad
checksum and the packet will be dropped.
It can be fixed if we skip skb_checksum_init_zero_check() and only
set the required pseudo header checksum for UDP-Lite with partial
checksum before udp4_csum_init()/udp6_csum_init() functions return.
Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4")
Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6")
Signed-off-by: Alexey Kodanev <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/udplite.h | 1 +
net/ipv4/udp.c | 5 +++++
net/ipv6/ip6_checksum.c | 5 +++++
3 files changed, 11 insertions(+)
--- a/include/net/udplite.h
+++ b/include/net/udplite.h
@@ -64,6 +64,7 @@ static inline int udplite_checksum_init(
UDP_SKB_CB(skb)->cscov = cscov;
if (skb->ip_summed == CHECKSUM_COMPLETE)
skb->ip_summed = CHECKSUM_NONE;
+ skb->csum_valid = 0;
}
return 0;
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2031,6 +2031,11 @@ static inline int udp4_csum_init(struct
err = udplite_checksum_init(skb, uh);
if (err)
return err;
+
+ if (UDP_SKB_CB(skb)->partial_cov) {
+ skb->csum = inet_compute_pseudo(skb, proto);
+ return 0;
+ }
}
/* Note, we are only interested in != 0 or == 0, thus the
--- a/net/ipv6/ip6_checksum.c
+++ b/net/ipv6/ip6_checksum.c
@@ -73,6 +73,11 @@ int udp6_csum_init(struct sk_buff *skb,
err = udplite_checksum_init(skb, uh);
if (err)
return err;
+
+ if (UDP_SKB_CB(skb)->partial_cov) {
+ skb->csum = ip6_compute_pseudo(skb, proto);
+ return 0;
+ }
}
/* To support RFC 6936 (allow zero checksum in UDP/IPV6 for tunnels)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tommi Rantala <[email protected]>
[ Upstream commit 4a31a6b19f9ddf498c81f5c9b089742b7472a6f8 ]
Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
410f03831 ("sctp: add routing output fallback"):
When walking the address_list, successive ip_route_output_key() calls
may return the same rt->dst with the reference incremented on each call.
The code would not decrement the dst refcount when the dst pointer was
identical from the previous iteration, causing the dst refcnt leak.
Testcase:
ip netns add TEST
ip netns exec TEST ip link set lo up
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link set dev dummy0 netns TEST
ip link set dev dummy1 netns TEST
ip link set dev dummy2 netns TEST
ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
ip netns exec TEST ip link set dummy0 up
ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
ip netns exec TEST ip link set dummy1 up
ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
ip netns exec TEST ip link set dummy2 up
ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
ip netns del TEST
In 4.4 and 4.9 kernels this results to:
[ 354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
[ 405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
...
Fixes: 410f03831 ("sctp: add routing output fallback")
Fixes: 0ca50d12f ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Tommi Rantala <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/protocol.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -514,22 +514,20 @@ static void sctp_v4_get_dst(struct sctp_
if (IS_ERR(rt))
continue;
- if (!dst)
- dst = &rt->dst;
-
/* Ensure the src address belongs to the output
* interface.
*/
odev = __ip_dev_find(sock_net(sk), laddr->a.v4.sin_addr.s_addr,
false);
if (!odev || odev->ifindex != fl4->flowi4_oif) {
- if (&rt->dst != dst)
+ if (!dst)
+ dst = &rt->dst;
+ else
dst_release(&rt->dst);
continue;
}
- if (dst != &rt->dst)
- dst_release(dst);
+ dst_release(dst);
dst = &rt->dst;
break;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Kodanev <[email protected]>
[ Upstream commit 07f2c7ab6f8d0a7e7c5764c4e6cc9c52951b9d9c ]
When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:
[ 597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
put:120156 head:000000007aa47635 data:00000000d991c2de
tail:0x1d640 end:0xfec0 dev:<NULL>
...
[ 597.976970] ------------[ cut here ]------------
[ 598.033408] kernel BUG at net/core/skbuff.c:104!
[ 600.314841] Call Trace:
[ 600.345829] <IRQ>
[ 600.371639] ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[ 600.436934] skb_put+0x16c/0x200
[ 600.477295] sctp_packet_transmit+0x2095/0x26d0 [sctp]
[ 600.540630] ? sctp_packet_config+0x890/0x890 [sctp]
[ 600.601781] ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[ 600.671356] ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[ 600.731482] sctp_outq_flush+0x663/0x30d0 [sctp]
[ 600.788565] ? sctp_make_init+0xbf0/0xbf0 [sctp]
[ 600.845555] ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[ 600.912945] ? sctp_outq_tail+0x631/0x9d0 [sctp]
[ 600.969936] sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[ 601.041593] ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[ 601.104837] ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[ 601.175436] ? sctp_eat_data+0x1710/0x1710 [sctp]
[ 601.233575] sctp_do_sm+0x182/0x560 [sctp]
[ 601.284328] ? sctp_has_association+0x70/0x70 [sctp]
[ 601.345586] ? sctp_rcv+0xef4/0x32f0 [sctp]
[ 601.397478] ? sctp6_rcv+0xa/0x20 [sctp]
...
Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.
Later this chunk causes the panic in skb_put_data():
skb_packet_transmit()
sctp_packet_pack()
skb_put_data(nskb, chunk->skb->data, chunk->skb->len);
'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.
As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: Alexey Kodanev <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sctp/sm_make_chunk.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1378,9 +1378,14 @@ static struct sctp_chunk *_sctp_make_chu
struct sctp_chunk *retval;
struct sk_buff *skb;
struct sock *sk;
+ int chunklen;
+
+ chunklen = SCTP_PAD4(sizeof(*chunk_hdr) + paylen);
+ if (chunklen > SCTP_MAX_CHUNK_LEN)
+ goto nodata;
/* No need to allocate LL here, as this is only a chunk. */
- skb = alloc_skb(SCTP_PAD4(sizeof(*chunk_hdr) + paylen), gfp);
+ skb = alloc_skb(chunklen, gfp);
if (!skb)
goto nodata;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guillaume Nault <[email protected]>
[ Upstream commit 77f840e3e5f09c6d7d727e85e6e08276dd813d11 ]
PPP units don't hold any reference on the channels connected to it.
It is the channel's responsibility to ensure that it disconnects from
its unit before being destroyed.
In practice, this is ensured by ppp_unregister_channel() disconnecting
the channel from the unit before dropping a reference on the channel.
However, it is possible for an unregistered channel to connect to a PPP
unit: register a channel with ppp_register_net_channel(), attach a
/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
with ppp_unregister_channel() and finally connect the /dev/ppp file to
a PPP unit with ioctl(PPPIOCCONNECT).
Once in this situation, the channel is only held by the /dev/ppp file,
which can be released at anytime and free the channel without letting
the parent PPP unit know. Then the ppp structure ends up with dangling
pointers in its ->channels list.
Prevent this scenario by forbidding unregistered channels from
connecting to PPP units. This maintains the code logic by keeping
ppp_unregister_channel() responsible from disconnecting the channel if
necessary and avoids modification on the reference counting mechanism.
This issue seems to predate git history (successfully reproduced on
Linux 2.6.26 and earlier PPP commits are unrelated).
Signed-off-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/ppp_generic.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/net/ppp/ppp_generic.c
+++ b/drivers/net/ppp/ppp_generic.c
@@ -3161,6 +3161,15 @@ ppp_connect_channel(struct channel *pch,
goto outl;
ppp_lock(ppp);
+ spin_lock_bh(&pch->downl);
+ if (!pch->chan) {
+ /* Don't connect unregistered channels */
+ spin_unlock_bh(&pch->downl);
+ ppp_unlock(ppp);
+ ret = -ENOTCONN;
+ goto outl;
+ }
+ spin_unlock_bh(&pch->downl);
if (pch->file.hdrlen > ppp->file.hdrlen)
ppp->file.hdrlen = pch->file.hdrlen;
hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Viresh Kumar <[email protected]>
commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream.
commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
accidentally broke cpufreq on s3c2410 and s3c2412.
These two platforms don't have a CPU frequency table and used to skip
calling cpufreq_table_validate_and_show() for them. But with the
above commit, we started calling it unconditionally and that will
eventually fail as the frequency table pointer is NULL.
Fix this by calling cpufreq_table_validate_and_show() conditionally
again.
Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()"
Cc: 3.13+ <[email protected]> # v3.13+
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/s3c24xx-cpufreq.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -351,7 +351,13 @@ struct clk *s3c_cpufreq_clk_get(struct d
static int s3c_cpufreq_init(struct cpufreq_policy *policy)
{
policy->clk = clk_arm;
- return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency);
+
+ policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+ if (ftab)
+ return cpufreq_table_validate_and_show(policy, ftab);
+
+ return 0;
}
static int __init s3c_cpufreq_initclks(void)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Kapl <[email protected]>
[ Upstream commit 5ae437ad5a2ed573b1ebb04e0afa70b8869f88dd ]
So far, if the filter was too large to fit in the allocated skb, the
kernel did not return any error and stopped dumping. Modify the dumper
so that it returns -EMSGSIZE when a filter fails to dump and it is the
first filter in the skb. If we are not first, we will get a next chance
with more room.
I understand this is pretty near to being an API change, but the
original design (silent truncation) can be considered a bug.
Note: The error case can happen pretty easily if you create a filter
with 32 actions and have 4kb pages. Also recent versions of iproute try
to be clever with their buffer allocation size, which in turn leads to
Signed-off-by: Roman Kapl <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/cls_api.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -1054,13 +1054,18 @@ static int tc_dump_tfilter(struct sk_buf
nla_get_u32(tca[TCA_CHAIN]) != chain->index)
continue;
if (!tcf_chain_dump(chain, q, parent, skb, cb,
- index_start, &index))
+ index_start, &index)) {
+ err = -EMSGSIZE;
break;
+ }
}
cb->args[0] = index;
out:
+ /* If we did no progress, the error (EMSGSIZE) is real */
+ if (skb->len == 0 && err)
+ return err;
return skb->len;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <[email protected]>
[ Upstream commit cb9f7a9a5c96a773bbc9c70660dc600cfff82f82 ]
Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e63756d5f was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.
To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.
Fixes: 134e63756d5f ("genetlink: make netns aware")
CC: Johannes Berg <[email protected]>
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netlink/genetlink.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -1081,6 +1081,7 @@ static int genlmsg_mcast(struct sk_buff
{
struct sk_buff *tmp;
struct net *net, *prev = NULL;
+ bool delivered = false;
int err;
for_each_net_rcu(net) {
@@ -1092,14 +1093,21 @@ static int genlmsg_mcast(struct sk_buff
}
err = nlmsg_multicast(prev->genl_sock, tmp,
portid, group, flags);
- if (err)
+ if (!err)
+ delivered = true;
+ else if (err != -ESRCH)
goto error;
}
prev = net;
}
- return nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
+ err = nlmsg_multicast(prev->genl_sock, skb, portid, group, flags);
+ if (!err)
+ delivered = true;
+ else if (err != -ESRCH)
+ goto error;
+ return delivered ? 0 : -ESRCH;
error:
kfree_skb(skb);
return err;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca <[email protected]>
[ Upstream commit c7272c2f1229125f74f22dcdd59de9bbd804f1c8 ]
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:
A host MUST never reduce its estimate of the Path MTU below 68
octets.
and (talking about ICMP frag-needed's Next-Hop MTU field):
This field will never contain a value less than 68, since every
router "must be able to forward a datagram of 68 octets without
fragmentation".
Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.
Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.
Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Stefano Brivio <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/route.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -128,10 +128,13 @@ static int ip_rt_redirect_silence __read
static int ip_rt_error_cost __read_mostly = HZ;
static int ip_rt_error_burst __read_mostly = 5 * HZ;
static int ip_rt_mtu_expires __read_mostly = 10 * 60 * HZ;
-static int ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
+static u32 ip_rt_min_pmtu __read_mostly = 512 + 20 + 20;
static int ip_rt_min_advmss __read_mostly = 256;
static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT;
+
+static int ip_min_valid_pmtu __read_mostly = IPV4_MIN_MTU;
+
/*
* Interface to generic destination cache.
*/
@@ -2934,7 +2937,8 @@ static struct ctl_table ipv4_route_table
.data = &ip_rt_min_pmtu,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &ip_min_valid_pmtu,
},
{
.procname = "min_adv_mss",
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Grygorii Strashko <[email protected]>
[ Upstream commit 62f94c2101f35cd45775df00ba09bde77580e26a ]
It was discovered that simple program which indefinitely sends 200b UDP
packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network
watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog
timeout is triggered due to race between cpsw_ndo_start_xmit() and
cpsw_tx_handler() [NAPI]
cpsw_ndo_start_xmit()
if (unlikely(!cpdma_check_free_tx_desc(txch))) {
txq = netdev_get_tx_queue(ndev, q_idx);
netif_tx_stop_queue(txq);
^^ as per [1] barier has to be used after set_bit() otherwise new value
might not be visible to other cpus
}
cpsw_tx_handler()
if (unlikely(netif_tx_queue_stopped(txq)))
netif_tx_wake_queue(txq);
and when it happens ndev TX queue became disabled forever while driver's HW
TX queue is empty.
Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue()
calls and double check for free TX descriptors after stopping ndev TX queue
- if there are free TX descriptors wake up ndev TX queue.
[1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html
Signed-off-by: Grygorii Strashko <[email protected]>
Reviewed-by: Ivan Khoronzhuk <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1618,6 +1618,7 @@ static netdev_tx_t cpsw_ndo_start_xmit(s
q_idx = q_idx % cpsw->tx_ch_num;
txch = cpsw->txv[q_idx].ch;
+ txq = netdev_get_tx_queue(ndev, q_idx);
ret = cpsw_tx_packet_submit(priv, skb, txch);
if (unlikely(ret != 0)) {
cpsw_err(priv, tx_err, "desc submit failed\n");
@@ -1628,15 +1629,26 @@ static netdev_tx_t cpsw_ndo_start_xmit(s
* tell the kernel to stop sending us tx frames.
*/
if (unlikely(!cpdma_check_free_tx_desc(txch))) {
- txq = netdev_get_tx_queue(ndev, q_idx);
netif_tx_stop_queue(txq);
+
+ /* Barrier, so that stop_queue visible to other cpus */
+ smp_mb__after_atomic();
+
+ if (cpdma_check_free_tx_desc(txch))
+ netif_tx_wake_queue(txq);
}
return NETDEV_TX_OK;
fail:
ndev->stats.tx_dropped++;
- txq = netdev_get_tx_queue(ndev, skb_get_queue_mapping(skb));
netif_tx_stop_queue(txq);
+
+ /* Barrier, so that stop_queue visible to other cpus */
+ smp_mb__after_atomic();
+
+ if (cpdma_check_free_tx_desc(txch))
+ netif_tx_wake_queue(txq);
+
return NETDEV_TX_BUSY;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski <[email protected]>
[ Upstream commit ac5b70198adc25c73fba28de4f78adcee8f6be0b ]
netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L. The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value. When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.
Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.
Fixes: e6484930d7c7 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2366,8 +2366,11 @@ EXPORT_SYMBOL(netdev_set_num_tc);
*/
int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
{
+ bool disabling;
int rc;
+ disabling = txq < dev->real_num_tx_queues;
+
if (txq < 1 || txq > dev->num_tx_queues)
return -EINVAL;
@@ -2383,15 +2386,19 @@ int netif_set_real_num_tx_queues(struct
if (dev->num_tc)
netif_setup_tc(dev, txq);
- if (txq < dev->real_num_tx_queues) {
+ dev->real_num_tx_queues = txq;
+
+ if (disabling) {
+ synchronize_net();
qdisc_reset_all_tx_gt(dev, txq);
#ifdef CONFIG_XPS
netif_reset_xps_queues_gt(dev, txq);
#endif
}
+ } else {
+ dev->real_num_tx_queues = txq;
}
- dev->real_num_tx_queues = txq;
return 0;
}
EXPORT_SYMBOL(netif_set_real_num_tx_queues);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang <[email protected]>
[ Upstream commit a3276892db7a588bedc33168e502572008f714a9 ]
Due to a typo, the mask was destroyed by a comparison instead of a bit
shift.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -595,7 +595,7 @@ isr_done:
reissue_mask = 1 << 0;
if (!pdata->per_channel_irq)
- reissue_mask |= 0xffff < 4;
+ reissue_mask |= 0xffff << 4;
XP_IOWRITE(pdata, XP_INT_REISSUE_EN, reissue_mask);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Denis Du <[email protected]>
[ Upstream commit b6c3bad1ba83af1062a7ff6986d9edc4f3d7fc8e ]
Sometimes when physical lines have a just good noise to make the protocol
handshaking fail, but the carrier detect still good. Then after remove of
the noise, nobody will trigger this protocol to be start again to cause
the link to never come back. The fix is when the carrier is still on, not
terminate the protocol handshaking.
Signed-off-by: Denis Du <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wan/hdlc_ppp.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -574,7 +574,10 @@ static void ppp_timer(struct timer_list
ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
0, NULL);
proto->restart_counter--;
- } else
+ } else if (netif_carrier_ok(proto->dev))
+ ppp_cp_event(proto->dev, proto->pid, TO_GOOD, 0, 0,
+ 0, NULL);
+ else
ppp_cp_event(proto->dev, proto->pid, TO_BAD, 0, 0,
0, NULL);
break;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Boone <[email protected]>
commit 3be23274755ee85771270a23af7691dc9b3a95db upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. If a bit does
flip it could cause an overrun if it's in one of the size parameters,
so sanity check that we're not overrunning the provided buffer when
doing a memcpy().
Signed-off-by: Jeremy Boone <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm-interface.c | 4 ++++
drivers/char/tpm/tpm2-cmd.c | 4 ++++
2 files changed, 8 insertions(+)
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -1228,6 +1228,10 @@ int tpm_get_random(u32 chip_num, u8 *out
break;
recd = be32_to_cpu(tpm_cmd.params.getrandom_out.rng_data_len);
+ if (recd > num_bytes) {
+ total = -EFAULT;
+ break;
+ }
rlength = be32_to_cpu(tpm_cmd.header.out.length);
if (rlength < offsetof(struct tpm_getrandom_out, rng_data) +
--- a/drivers/char/tpm/tpm2-cmd.c
+++ b/drivers/char/tpm/tpm2-cmd.c
@@ -683,6 +683,10 @@ static int tpm2_unseal_cmd(struct tpm_ch
if (!rc) {
data_len = be16_to_cpup(
(__be16 *) &buf.data[TPM_HEADER_SIZE + 4]);
+ if (data_len < MIN_KEY_SIZE || data_len > MAX_KEY_SIZE + 1) {
+ rc = -EFAULT;
+ goto out;
+ }
rlength = be32_to_cpu(((struct tpm2_cmd *)&buf)
->header.out.length);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ]
gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:
net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]
The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.
We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.
This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.
Cc: Martin Sebor <[email protected]>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/sit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -182,7 +182,7 @@ static void ipip6_tunnel_clone_6rd(struc
#ifdef CONFIG_IPV6_SIT_6RD
struct ip_tunnel *t = netdev_priv(dev);
- if (t->dev == sitn->fb_tunnel_dev) {
+ if (dev == sitn->fb_tunnel_dev) {
ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
t->ip6rd.relay_prefix = 0;
t->ip6rd.prefixlen = 16;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <[email protected]>
commit 94db151dc89262bfa82922c44e8320cea2334667 upstream.
Filesystem-DAX is incompatible with 'longterm' page pinning. Without
page cache indirection a DAX mapping maps filesystem blocks directly.
This means that the filesystem must not modify a file's block map while
any page in a mapping is pinned. In order to prevent the situation of
userspace holding of filesystem operations indefinitely, disallow
'longterm' Filesystem-DAX mappings.
RDMA has the same conflict and the plan there is to add a 'with lease'
mechanism to allow the kernel to notify userspace that the mapping is
being torn down for block-map maintenance. Perhaps something similar can
be put in place for vfio.
Note that xfs and ext4 still report:
"DAX enabled. Warning: EXPERIMENTAL, use at your own risk"
...at mount time, and resolving the dax-dma-vs-truncate problem is one
of the last hurdles to remove that designation.
Acked-by: Alex Williamson <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: [email protected]
Cc: <[email protected]>
Reported-by: Haozhong Zhang <[email protected]>
Tested-by: Haozhong Zhang <[email protected]>
Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O")
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/vfio/vfio_iommu_type1.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -338,11 +338,12 @@ static int vaddr_get_pfn(struct mm_struc
{
struct page *page[1];
struct vm_area_struct *vma;
+ struct vm_area_struct *vmas[1];
int ret;
if (mm == current->mm) {
- ret = get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE),
- page);
+ ret = get_user_pages_longterm(vaddr, 1, !!(prot & IOMMU_WRITE),
+ page, vmas);
} else {
unsigned int flags = 0;
@@ -351,7 +352,18 @@ static int vaddr_get_pfn(struct mm_struc
down_read(&mm->mmap_sem);
ret = get_user_pages_remote(NULL, mm, vaddr, 1, flags, page,
- NULL, NULL);
+ vmas, NULL);
+ /*
+ * The lifetime of a vaddr_get_pfn() page pin is
+ * userspace-controlled. In the fs-dax case this could
+ * lead to indefinite stalls in filesystem operations.
+ * Disallow attempts to pin fs-dax pages via this
+ * interface.
+ */
+ if (ret > 0 && vma_is_fsdax(vmas[0])) {
+ ret = -EOPNOTSUPP;
+ put_page(page[0]);
+ }
up_read(&mm->mmap_sem);
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Boone <[email protected]>
commit 6d24cd186d9fead3722108dec1b1c993354645ff upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/st33zp24/st33zp24.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/st33zp24/st33zp24.c
+++ b/drivers/char/tpm/st33zp24/st33zp24.c
@@ -457,7 +457,7 @@ static int st33zp24_recv(struct tpm_chip
size_t count)
{
int size = 0;
- int expected;
+ u32 expected;
if (!chip)
return -EBUSY;
@@ -474,7 +474,7 @@ static int st33zp24_recv(struct tpm_chip
}
expected = be32_to_cpu(*(__be32 *)(buf + 2));
- if (expected > count) {
+ if (expected > count || expected < TPM_HEADER_SIZE) {
size = -EIO;
goto out;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emil Tantilov <[email protected]>
commit 0c5661ecc5dd7ce296870a3eb7b62b1b280a5e89 upstream.
Add check for build_skb enabled ring in ixgbe_dma_sync_frag().
In that case &skb_shinfo(skb)->frags[0] may not always be set which
can lead to a crash. Instead we derive the page offset from skb->data.
Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner")
CC: stable <[email protected]>
Reported-by: Ambarish Soman <[email protected]>
Suggested-by: Alexander Duyck <[email protected]>
Signed-off-by: Emil Tantilov <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1878,6 +1878,14 @@ static void ixgbe_dma_sync_frag(struct i
ixgbe_rx_pg_size(rx_ring),
DMA_FROM_DEVICE,
IXGBE_RX_DMA_ATTR);
+ } else if (ring_uses_build_skb(rx_ring)) {
+ unsigned long offset = (unsigned long)(skb->data) & ~PAGE_MASK;
+
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ IXGBE_CB(skb)->dma,
+ offset,
+ skb_headlen(skb),
+ DMA_FROM_DEVICE);
} else {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 1fdb926974695d3dbc05a429bafa266fdd16510e upstream.
Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix
with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA
USB Bluetooth modules. But it turns out that the resume problems are not
caused by the QCA Rome chipset, on most platforms it resumes fine. The
resume problems are actually a platform problem (likely the platform
cutting all power when suspended).
The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by
matching on usb-ids, we're causing all boards with these chips to use extra
power, to fix resume problems which only happen on some boards.
This commit fixes this by applying the quirk based on DMI matching instead
of on usb-ids, so that we match the platform and not the chipset.
Here is the /sys/kernel/debug/usb/devices for the Bluetooth module:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=e300 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..")
Cc: [email protected]
Cc: Brian Norris <[email protected]>
Cc: Kai-Heng Feng <[email protected]>
Reported-and-tested-by: Kevin Fenzi <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/bluetooth/btusb.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -21,6 +21,7 @@
*
*/
+#include <linux/dmi.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/quirks.h>
@@ -376,6 +377,21 @@ static const struct usb_device_id blackl
{ } /* Terminating entry */
};
+/* The Bluetooth USB module build into some devices needs to be reset on resume,
+ * this is a problem with the platform (likely shutting off all power) not with
+ * the module itself. So we use a DMI list to match known broken platforms.
+ */
+static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
+ {
+ /* Lenovo Yoga 920 (QCA Rome device 0cf3:e300) */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920"),
+ },
+ },
+ {}
+};
+
#define BTUSB_MAX_ISOC_FRAMES 10
#define BTUSB_INTR_RUNNING 0
@@ -3031,6 +3047,9 @@ static int btusb_probe(struct usb_interf
hdev->send = btusb_send_frame;
hdev->notify = btusb_notify;
+ if (dmi_check_system(btusb_needs_reset_resume_table))
+ interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
+
#ifdef CONFIG_PM
err = btusb_config_oob_wake(hdev);
if (err)
@@ -3117,12 +3136,6 @@ static int btusb_probe(struct usb_interf
if (id->driver_info & BTUSB_QCA_ROME) {
data->setup_on_usb = btusb_setup_qca;
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
-
- /* QCA Rome devices lose their updated firmware over suspend,
- * but the USB hub doesn't notice any status change.
- * explicitly request a device reset on resume.
- */
- interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
}
#ifdef CONFIG_BT_HCIBTUSB_RTL
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sam Bobroff <[email protected]>
commit c9dccf1d074a67d36c510845f663980d69e3409b upstream.
Currently if the kernel receives a memory hot-unplug event early
enough, it may get stuck in an infinite loop in
dissolve_free_huge_pages(). This appears as a stall just after:
pseries-hotplug-mem: Attempting to hot-remove XX LMB(s) at YYYYYYYY
It appears to be caused by "minimum_order" being uninitialized, due to
init_ras_IRQ() executing before hugetlb_init().
To correct this, extract the part of init_ras_IRQ() that enables
hotplug event processing and place it in the machine_late_initcall
phase, which is guaranteed to be after hugetlb_init() is called.
Signed-off-by: Sam Bobroff <[email protected]>
Acked-by: Balbir Singh <[email protected]>
[mpe: Reorder the functions to make the diff readable]
Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/platforms/pseries/ras.c | 31 ++++++++++++++++++++++---------
1 file changed, 22 insertions(+), 9 deletions(-)
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -49,6 +49,28 @@ static irqreturn_t ras_error_interrupt(i
/*
+ * Enable the hotplug interrupt late because processing them may touch other
+ * devices or systems (e.g. hugepages) that have not been initialized at the
+ * subsys stage.
+ */
+int __init init_ras_hotplug_IRQ(void)
+{
+ struct device_node *np;
+
+ /* Hotplug Events */
+ np = of_find_node_by_path("/event-sources/hot-plug-events");
+ if (np != NULL) {
+ if (dlpar_workqueue_init() == 0)
+ request_event_sources_irqs(np, ras_hotplug_interrupt,
+ "RAS_HOTPLUG");
+ of_node_put(np);
+ }
+
+ return 0;
+}
+machine_late_initcall(pseries, init_ras_hotplug_IRQ);
+
+/*
* Initialize handlers for the set of interrupts caused by hardware errors
* and power system events.
*/
@@ -66,15 +88,6 @@ static int __init init_ras_IRQ(void)
of_node_put(np);
}
- /* Hotplug Events */
- np = of_find_node_by_path("/event-sources/hot-plug-events");
- if (np != NULL) {
- if (dlpar_workqueue_init() == 0)
- request_event_sources_irqs(np, ras_hotplug_interrupt,
- "RAS_HOTPLUG");
- of_node_put(np);
- }
-
/* EPOW Events */
np = of_find_node_by_path("/event-sources/epow-events");
if (np != NULL) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <[email protected]>
commit 9862b43624a5450a097cc4122732857b869dbbca upstream.
There is no longer a need for the buffer to be defined in
first 4GB physical address space.
Furthermore there may be race conditions with multiple different functions
working on a module wide buffer causing incorrect results.
Fixes: 549b4930f057658dc50d8010e66219233119a4d8
Suggested-by: Pali Rohar <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/dell-laptop.c | 188 ++++++++++++++++++++-----------------
1 file changed, 103 insertions(+), 85 deletions(-)
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -78,7 +78,6 @@ static struct platform_driver platform_d
}
};
-static struct calling_interface_buffer *buffer;
static struct platform_device *platform_device;
static struct backlight_device *dell_backlight_device;
static struct rfkill *wifi_rfkill;
@@ -286,7 +285,8 @@ static const struct dmi_system_id dell_q
{ }
};
-void dell_set_arguments(u32 arg0, u32 arg1, u32 arg2, u32 arg3)
+static void dell_fill_request(struct calling_interface_buffer *buffer,
+ u32 arg0, u32 arg1, u32 arg2, u32 arg3)
{
memset(buffer, 0, sizeof(struct calling_interface_buffer));
buffer->input[0] = arg0;
@@ -295,7 +295,8 @@ void dell_set_arguments(u32 arg0, u32 ar
buffer->input[3] = arg3;
}
-int dell_send_request(u16 class, u16 select)
+static int dell_send_request(struct calling_interface_buffer *buffer,
+ u16 class, u16 select)
{
int ret;
@@ -432,21 +433,22 @@ static int dell_rfkill_set(void *data, b
int disable = blocked ? 1 : 0;
unsigned long radio = (unsigned long)data;
int hwswitch_bit = (unsigned long)data - 1;
+ struct calling_interface_buffer buffer;
int hwswitch;
int status;
int ret;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (ret)
return ret;
- status = buffer->output[1];
+ status = buffer.output[1];
- dell_set_arguments(0x2, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 0x2, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (ret)
return ret;
- hwswitch = buffer->output[1];
+ hwswitch = buffer.output[1];
/* If the hardware switch controls this radio, and the hardware
switch is disabled, always disable the radio */
@@ -454,8 +456,8 @@ static int dell_rfkill_set(void *data, b
(status & BIT(0)) && !(status & BIT(16)))
disable = 1;
- dell_set_arguments(1 | (radio<<8) | (disable << 16), 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 1 | (radio<<8) | (disable << 16), 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
return ret;
}
@@ -464,9 +466,11 @@ static void dell_rfkill_update_sw_state(
{
if (status & BIT(0)) {
/* Has hw-switch, sync sw_state to BIOS */
+ struct calling_interface_buffer buffer;
int block = rfkill_blocked(rfkill);
- dell_set_arguments(1 | (radio << 8) | (block << 16), 0, 0, 0);
- dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer,
+ 1 | (radio << 8) | (block << 16), 0, 0, 0);
+ dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
} else {
/* No hw-switch, sync BIOS state to sw_state */
rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16)));
@@ -483,21 +487,22 @@ static void dell_rfkill_update_hw_state(
static void dell_rfkill_query(struct rfkill *rfkill, void *data)
{
int radio = ((unsigned long)data & 0xF);
+ struct calling_interface_buffer buffer;
int hwswitch;
int status;
int ret;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
- status = buffer->output[1];
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
+ status = buffer.output[1];
if (ret != 0 || !(status & BIT(0))) {
return;
}
- dell_set_arguments(0, 0x2, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
- hwswitch = buffer->output[1];
+ dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
+ hwswitch = buffer.output[1];
if (ret != 0)
return;
@@ -514,22 +519,23 @@ static struct dentry *dell_laptop_dir;
static int dell_debugfs_show(struct seq_file *s, void *data)
{
+ struct calling_interface_buffer buffer;
int hwswitch_state;
int hwswitch_ret;
int status;
int ret;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (ret)
return ret;
- status = buffer->output[1];
+ status = buffer.output[1];
- dell_set_arguments(0, 0x2, 0, 0);
- hwswitch_ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (hwswitch_ret)
return hwswitch_ret;
- hwswitch_state = buffer->output[1];
+ hwswitch_state = buffer.output[1];
seq_printf(s, "return:\t%d\n", ret);
seq_printf(s, "status:\t0x%X\n", status);
@@ -610,22 +616,23 @@ static const struct file_operations dell
static void dell_update_rfkill(struct work_struct *ignored)
{
+ struct calling_interface_buffer buffer;
int hwswitch = 0;
int status;
int ret;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
- status = buffer->output[1];
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
+ status = buffer.output[1];
if (ret != 0)
return;
- dell_set_arguments(0, 0x2, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
+ dell_fill_request(&buffer, 0, 0x2, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
if (ret == 0 && (status & BIT(0)))
- hwswitch = buffer->output[1];
+ hwswitch = buffer.output[1];
if (wifi_rfkill) {
dell_rfkill_update_hw_state(wifi_rfkill, 1, status, hwswitch);
@@ -683,6 +690,7 @@ static struct notifier_block dell_laptop
static int __init dell_setup_rfkill(void)
{
+ struct calling_interface_buffer buffer;
int status, ret, whitelisted;
const char *product;
@@ -698,9 +706,9 @@ static int __init dell_setup_rfkill(void
if (!force_rfkill && !whitelisted)
return 0;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
- status = buffer->output[1];
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
+ status = buffer.output[1];
/* dell wireless info smbios call is not supported */
if (ret != 0)
@@ -853,6 +861,7 @@ static void dell_cleanup_rfkill(void)
static int dell_send_intensity(struct backlight_device *bd)
{
+ struct calling_interface_buffer buffer;
struct calling_interface_token *token;
int ret;
@@ -860,17 +869,21 @@ static int dell_send_intensity(struct ba
if (!token)
return -ENODEV;
- dell_set_arguments(token->location, bd->props.brightness, 0, 0);
+ dell_fill_request(&buffer,
+ token->location, bd->props.brightness, 0, 0);
if (power_supply_is_system_supplied() > 0)
- ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_AC);
+ ret = dell_send_request(&buffer,
+ CLASS_TOKEN_WRITE, SELECT_TOKEN_AC);
else
- ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_BAT);
+ ret = dell_send_request(&buffer,
+ CLASS_TOKEN_WRITE, SELECT_TOKEN_BAT);
return ret;
}
static int dell_get_intensity(struct backlight_device *bd)
{
+ struct calling_interface_buffer buffer;
struct calling_interface_token *token;
int ret;
@@ -878,14 +891,17 @@ static int dell_get_intensity(struct bac
if (!token)
return -ENODEV;
- dell_set_arguments(token->location, 0, 0, 0);
+ dell_fill_request(&buffer, token->location, 0, 0, 0);
if (power_supply_is_system_supplied() > 0)
- ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC);
+ ret = dell_send_request(&buffer,
+ CLASS_TOKEN_READ, SELECT_TOKEN_AC);
else
- ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_BAT);
+ ret = dell_send_request(&buffer,
+ CLASS_TOKEN_READ, SELECT_TOKEN_BAT);
if (ret == 0)
- ret = buffer->output[1];
+ ret = buffer.output[1];
+
return ret;
}
@@ -1149,31 +1165,33 @@ static DEFINE_MUTEX(kbd_led_mutex);
static int kbd_get_info(struct kbd_info *info)
{
+ struct calling_interface_buffer buffer;
u8 units;
int ret;
- dell_set_arguments(0, 0, 0, 0);
- ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer,
+ CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
if (ret)
return ret;
- info->modes = buffer->output[1] & 0xFFFF;
- info->type = (buffer->output[1] >> 24) & 0xFF;
- info->triggers = buffer->output[2] & 0xFF;
- units = (buffer->output[2] >> 8) & 0xFF;
- info->levels = (buffer->output[2] >> 16) & 0xFF;
+ info->modes = buffer.output[1] & 0xFFFF;
+ info->type = (buffer.output[1] >> 24) & 0xFF;
+ info->triggers = buffer.output[2] & 0xFF;
+ units = (buffer.output[2] >> 8) & 0xFF;
+ info->levels = (buffer.output[2] >> 16) & 0xFF;
if (quirks && quirks->kbd_led_levels_off_1 && info->levels)
info->levels--;
if (units & BIT(0))
- info->seconds = (buffer->output[3] >> 0) & 0xFF;
+ info->seconds = (buffer.output[3] >> 0) & 0xFF;
if (units & BIT(1))
- info->minutes = (buffer->output[3] >> 8) & 0xFF;
+ info->minutes = (buffer.output[3] >> 8) & 0xFF;
if (units & BIT(2))
- info->hours = (buffer->output[3] >> 16) & 0xFF;
+ info->hours = (buffer.output[3] >> 16) & 0xFF;
if (units & BIT(3))
- info->days = (buffer->output[3] >> 24) & 0xFF;
+ info->days = (buffer.output[3] >> 24) & 0xFF;
return ret;
}
@@ -1233,31 +1251,34 @@ static int kbd_set_level(struct kbd_stat
static int kbd_get_state(struct kbd_state *state)
{
+ struct calling_interface_buffer buffer;
int ret;
- dell_set_arguments(0x1, 0, 0, 0);
- ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
+ dell_fill_request(&buffer, 0, 0, 0, 0);
+ ret = dell_send_request(&buffer,
+ CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
if (ret)
return ret;
- state->mode_bit = ffs(buffer->output[1] & 0xFFFF);
+ state->mode_bit = ffs(buffer.output[1] & 0xFFFF);
if (state->mode_bit != 0)
state->mode_bit--;
- state->triggers = (buffer->output[1] >> 16) & 0xFF;
- state->timeout_value = (buffer->output[1] >> 24) & 0x3F;
- state->timeout_unit = (buffer->output[1] >> 30) & 0x3;
- state->als_setting = buffer->output[2] & 0xFF;
- state->als_value = (buffer->output[2] >> 8) & 0xFF;
- state->level = (buffer->output[2] >> 16) & 0xFF;
- state->timeout_value_ac = (buffer->output[2] >> 24) & 0x3F;
- state->timeout_unit_ac = (buffer->output[2] >> 30) & 0x3;
+ state->triggers = (buffer.output[1] >> 16) & 0xFF;
+ state->timeout_value = (buffer.output[1] >> 24) & 0x3F;
+ state->timeout_unit = (buffer.output[1] >> 30) & 0x3;
+ state->als_setting = buffer.output[2] & 0xFF;
+ state->als_value = (buffer.output[2] >> 8) & 0xFF;
+ state->level = (buffer.output[2] >> 16) & 0xFF;
+ state->timeout_value_ac = (buffer.output[2] >> 24) & 0x3F;
+ state->timeout_unit_ac = (buffer.output[2] >> 30) & 0x3;
return ret;
}
static int kbd_set_state(struct kbd_state *state)
{
+ struct calling_interface_buffer buffer;
int ret;
u32 input1;
u32 input2;
@@ -1270,8 +1291,9 @@ static int kbd_set_state(struct kbd_stat
input2 |= (state->level & 0xFF) << 16;
input2 |= (state->timeout_value_ac & 0x3F) << 24;
input2 |= (state->timeout_unit_ac & 0x3) << 30;
- dell_set_arguments(0x2, input1, input2, 0);
- ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
+ dell_fill_request(&buffer, 0x2, input1, input2, 0);
+ ret = dell_send_request(&buffer,
+ CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
return ret;
}
@@ -1298,6 +1320,7 @@ static int kbd_set_state_safe(struct kbd
static int kbd_set_token_bit(u8 bit)
{
+ struct calling_interface_buffer buffer;
struct calling_interface_token *token;
int ret;
@@ -1308,14 +1331,15 @@ static int kbd_set_token_bit(u8 bit)
if (!token)
return -EINVAL;
- dell_set_arguments(token->location, token->value, 0, 0);
- ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
+ dell_fill_request(&buffer, token->location, token->value, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
return ret;
}
static int kbd_get_token_bit(u8 bit)
{
+ struct calling_interface_buffer buffer;
struct calling_interface_token *token;
int ret;
int val;
@@ -1327,9 +1351,9 @@ static int kbd_get_token_bit(u8 bit)
if (!token)
return -EINVAL;
- dell_set_arguments(token->location, 0, 0, 0);
- ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_STD);
- val = buffer->output[1];
+ dell_fill_request(&buffer, token->location, 0, 0, 0);
+ ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_STD);
+ val = buffer.output[1];
if (ret)
return ret;
@@ -2046,6 +2070,7 @@ static struct notifier_block dell_laptop
int dell_micmute_led_set(int state)
{
+ struct calling_interface_buffer buffer;
struct calling_interface_token *token;
if (state == 0)
@@ -2058,8 +2083,8 @@ int dell_micmute_led_set(int state)
if (!token)
return -ENODEV;
- dell_set_arguments(token->location, token->value, 0, 0);
- dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
+ dell_fill_request(&buffer, token->location, token->value, 0, 0);
+ dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
return state;
}
@@ -2090,13 +2115,6 @@ static int __init dell_init(void)
if (ret)
goto fail_platform_device2;
- buffer = kzalloc(sizeof(struct calling_interface_buffer), GFP_KERNEL);
- if (!buffer) {
- ret = -ENOMEM;
- goto fail_buffer;
- }
-
-
ret = dell_setup_rfkill();
if (ret) {
@@ -2121,10 +2139,13 @@ static int __init dell_init(void)
token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
if (token) {
- dell_set_arguments(token->location, 0, 0, 0);
- ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC);
+ struct calling_interface_buffer buffer;
+
+ dell_fill_request(&buffer, token->location, 0, 0, 0);
+ ret = dell_send_request(&buffer,
+ CLASS_TOKEN_READ, SELECT_TOKEN_AC);
if (ret)
- max_intensity = buffer->output[3];
+ max_intensity = buffer.output[3];
}
if (max_intensity) {
@@ -2158,8 +2179,6 @@ static int __init dell_init(void)
fail_get_brightness:
backlight_device_unregister(dell_backlight_device);
fail_backlight:
- kfree(buffer);
-fail_buffer:
dell_cleanup_rfkill();
fail_rfkill:
platform_device_del(platform_device);
@@ -2179,7 +2198,6 @@ static void __exit dell_exit(void)
touchpad_led_exit();
kbd_led_exit();
backlight_device_unregister(dell_backlight_device);
- kfree(buffer);
dell_cleanup_rfkill();
if (platform_device) {
platform_device_unregister(platform_device);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
commit ba989a01469d027861e55c8f1121edadef757797 upstream.
When requeuing request, the domain token should have been freed
before re-inserting the request to io scheduler. Otherwise, the
assigned domain token will be leaked, and IO hang can be caused.
Cc: Paolo Valente <[email protected]>
Cc: Omar Sandoval <[email protected]>
Cc: [email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/kyber-iosched.c | 1 +
1 file changed, 1 insertion(+)
--- a/block/kyber-iosched.c
+++ b/block/kyber-iosched.c
@@ -833,6 +833,7 @@ static struct elevator_type kyber_sched
.limit_depth = kyber_limit_depth,
.prepare_request = kyber_prepare_request,
.finish_request = kyber_finish_request,
+ .requeue_request = kyber_finish_request,
.completed_request = kyber_completed_request,
.dispatch_request = kyber_dispatch_request,
.has_work = kyber_has_work,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiufei Xue <[email protected]>
commit 7c5a0dcf557c6511a61e092ba887de28882fe857 upstream.
The vm counters is counted in sectors, so we should do the conversation
in submit_bio.
Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Cc: [email protected]
Reviewed-by: Omar Sandoval <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jiufei Xue <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2401,7 +2401,7 @@ blk_qc_t submit_bio(struct bio *bio)
unsigned int count;
if (unlikely(bio_op(bio) == REQ_OP_WRITE_SAME))
- count = queue_logical_block_size(bio->bi_disk->queue);
+ count = queue_logical_block_size(bio->bi_disk->queue) >> 9;
else
count = bio_sectors(bio);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anand Jain <[email protected]>
commit 3c181c12c431fe33b669410d663beb9cceefcd1b upstream.
The fs_info::super_copy is a byte copy of the on-disk structure and all
members must use the accessor macros/functions to obtain the right
value. This was missing in update_super_roots and in sysfs readers.
Moving between opposite endianness hosts will report bogus numbers in
sysfs, and mount may fail as the root will not be restored correctly. If
the filesystem is always used on a same endian host, this will not be a
problem.
Fix this by using the btrfs_set_super...() functions to set
fs_info::super_copy values, and for the sysfs, use the cached
fs_info::nodesize/sectorsize values.
CC: [email protected]
Fixes: df93589a17378 ("btrfs: export more from FS_INFO to sysfs")
Signed-off-by: Anand Jain <[email protected]>
Reviewed-by: Liu Bo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ update changelog ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/sysfs.c | 8 +++-----
fs/btrfs/transaction.c | 20 ++++++++++++--------
2 files changed, 15 insertions(+), 13 deletions(-)
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -423,7 +423,7 @@ static ssize_t btrfs_nodesize_show(struc
{
struct btrfs_fs_info *fs_info = to_fs_info(kobj);
- return snprintf(buf, PAGE_SIZE, "%u\n", fs_info->super_copy->nodesize);
+ return snprintf(buf, PAGE_SIZE, "%u\n", fs_info->nodesize);
}
BTRFS_ATTR(, nodesize, btrfs_nodesize_show);
@@ -433,8 +433,7 @@ static ssize_t btrfs_sectorsize_show(str
{
struct btrfs_fs_info *fs_info = to_fs_info(kobj);
- return snprintf(buf, PAGE_SIZE, "%u\n",
- fs_info->super_copy->sectorsize);
+ return snprintf(buf, PAGE_SIZE, "%u\n", fs_info->sectorsize);
}
BTRFS_ATTR(, sectorsize, btrfs_sectorsize_show);
@@ -444,8 +443,7 @@ static ssize_t btrfs_clone_alignment_sho
{
struct btrfs_fs_info *fs_info = to_fs_info(kobj);
- return snprintf(buf, PAGE_SIZE, "%u\n",
- fs_info->super_copy->sectorsize);
+ return snprintf(buf, PAGE_SIZE, "%u\n", fs_info->sectorsize);
}
BTRFS_ATTR(, clone_alignment, btrfs_clone_alignment_show);
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -1723,19 +1723,23 @@ static void update_super_roots(struct bt
super = fs_info->super_copy;
+ /* update latest btrfs_super_block::chunk_root refs */
root_item = &fs_info->chunk_root->root_item;
- super->chunk_root = root_item->bytenr;
- super->chunk_root_generation = root_item->generation;
- super->chunk_root_level = root_item->level;
+ btrfs_set_super_chunk_root(super, root_item->bytenr);
+ btrfs_set_super_chunk_root_generation(super, root_item->generation);
+ btrfs_set_super_chunk_root_level(super, root_item->level);
+ /* update latest btrfs_super_block::root refs */
root_item = &fs_info->tree_root->root_item;
- super->root = root_item->bytenr;
- super->generation = root_item->generation;
- super->root_level = root_item->level;
+ btrfs_set_super_root(super, root_item->bytenr);
+ btrfs_set_super_generation(super, root_item->generation);
+ btrfs_set_super_root_level(super, root_item->level);
+
if (btrfs_test_opt(fs_info, SPACE_CACHE))
- super->cache_generation = root_item->generation;
+ btrfs_set_super_cache_generation(super, root_item->generation);
if (test_bit(BTRFS_FS_UPDATE_UUID_TREE_GEN, &fs_info->flags))
- super->uuid_tree_generation = root_item->generation;
+ btrfs_set_super_uuid_tree_generation(super,
+ root_item->generation);
}
int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit fd8d0ca2563151204f3fe555dc8ca4bcfe8677a3 upstream.
For security reasons do not expose the virtual kernel memory layout to
userspace.
Signed-off-by: Helge Deller <[email protected]>
Suggested-by: Kees Cook <[email protected]>
Cc: [email protected] # 4.15
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/mm/init.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -629,7 +629,12 @@ void __init mem_init(void)
#endif
mem_init_print_info(NULL);
-#ifdef CONFIG_DEBUG_KERNEL /* double-sanity-check paranoia */
+
+#if 0
+ /*
+ * Do not expose the virtual kernel memory layout to userspace.
+ * But keep code for debugging purposes.
+ */
printk("virtual kernel memory layout:\n"
" vmalloc : 0x%px - 0x%px (%4ld MB)\n"
" memory : 0x%px - 0x%px (%4ld MB)\n"
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Lin <[email protected]>
commit a4faa4929ed3be15e2d500d2405f992f6dedc8eb upstream.
Factor out dw_mci_init_slot_caps to consolidate parsing
all differents types of capabilities from host contrllers.
No functional change intended.
Signed-off-by: Shawn Lin <[email protected]>
Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks")
Cc: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 73 +++++++++++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 30 deletions(-)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2782,12 +2782,50 @@ static irqreturn_t dw_mci_interrupt(int
return IRQ_HANDLED;
}
+static int dw_mci_init_slot_caps(struct dw_mci_slot *slot)
+{
+ struct dw_mci *host = slot->host;
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
+ struct mmc_host *mmc = slot->mmc;
+ int ctrl_id;
+
+ if (host->pdata->caps)
+ mmc->caps = host->pdata->caps;
+
+ /*
+ * Support MMC_CAP_ERASE by default.
+ * It needs to use trim/discard/erase commands.
+ */
+ mmc->caps |= MMC_CAP_ERASE;
+
+ if (host->pdata->pm_caps)
+ mmc->pm_caps = host->pdata->pm_caps;
+
+ if (host->dev->of_node) {
+ ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
+ if (ctrl_id < 0)
+ ctrl_id = 0;
+ } else {
+ ctrl_id = to_platform_device(host->dev)->id;
+ }
+ if (drv_data && drv_data->caps)
+ mmc->caps |= drv_data->caps[ctrl_id];
+
+ if (host->pdata->caps2)
+ mmc->caps2 = host->pdata->caps2;
+
+ /* Process SDIO IRQs through the sdio_irq_work. */
+ if (mmc->caps & MMC_CAP_SDIO_IRQ)
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
+ return 0;
+}
+
static int dw_mci_init_slot(struct dw_mci *host)
{
struct mmc_host *mmc;
struct dw_mci_slot *slot;
- const struct dw_mci_drv_data *drv_data = host->drv_data;
- int ctrl_id, ret;
+ int ret;
u32 freq[2];
mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
@@ -2821,38 +2859,13 @@ static int dw_mci_init_slot(struct dw_mc
if (!mmc->ocr_avail)
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- if (host->pdata->caps)
- mmc->caps = host->pdata->caps;
-
- /*
- * Support MMC_CAP_ERASE by default.
- * It needs to use trim/discard/erase commands.
- */
- mmc->caps |= MMC_CAP_ERASE;
-
- if (host->pdata->pm_caps)
- mmc->pm_caps = host->pdata->pm_caps;
-
- if (host->dev->of_node) {
- ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
- if (ctrl_id < 0)
- ctrl_id = 0;
- } else {
- ctrl_id = to_platform_device(host->dev)->id;
- }
- if (drv_data && drv_data->caps)
- mmc->caps |= drv_data->caps[ctrl_id];
-
- if (host->pdata->caps2)
- mmc->caps2 = host->pdata->caps2;
-
ret = mmc_of_parse(mmc);
if (ret)
goto err_host_allocated;
- /* Process SDIO IRQs through the sdio_irq_work. */
- if (mmc->caps & MMC_CAP_SDIO_IRQ)
- mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+ ret = dw_mci_init_slot_caps(slot);
+ if (ret)
+ goto err_host_allocated;
/* Useful defaults if platform data is unset. */
if (host->use_dma == TRANS_MODE_IDMAC) {
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller <[email protected]>
commit 5ffa8518851f1401817c15d2a7eecc0373c26ff9 upstream.
When running on qemu we know that the (emulated) cr16 cpu-internal
clocks are syncronized. So let's use them unconditionally on qemu.
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # 4.14+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/include/asm/processor.h | 2 ++
arch/parisc/kernel/time.c | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -316,6 +316,8 @@ extern int _parisc_requires_coherency;
#define parisc_requires_coherency() (0)
#endif
+extern int running_on_qemu;
+
#endif /* __ASSEMBLY__ */
#endif /* __ASM_PARISC_PROCESSOR_H */
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -248,7 +248,7 @@ static int __init init_cr16_clocksource(
* different sockets, so mark them unstable and lower rating on
* multi-socket SMP systems.
*/
- if (num_online_cpus() > 1) {
+ if (num_online_cpus() > 1 && !running_on_qemu) {
int cpu;
unsigned long cpu0_loc;
cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lingutla Chandrasekhar <[email protected]>
commit c52232a49e203a65a6e1a670cd5262f59e9364a0 upstream.
On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.
If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.
In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.
But there is a worse problem than that. The following sequence of events
illustrates it:
- CPU0 timer1 is queued expires = 59969 and base->clk = 59131.
The timer is queued at wheel level 2, with resulting expiry time = 60032
(due to level granularity).
- CPU1 enters idle @60007, with next timer expiry @60020.
- CPU0 is hotplugged at @60009
- CPU1 exits idle and runs the control thread which migrates the
timers from CPU0
timer1 is now queued in level 0 for immediate handling in the next
softirq because the requested expiry time 59969 is before CPU1 base->clk
60007
- CPU1 runs code which forwards the base clock which succeeds because the
next expiring timer. which was collected at idle entry time is still set
to 60020.
So it forwards beyond 60007 and therefore misses to expire the migrated
timer1. That timer gets expired when the wheel wraps around again, which
takes between 63 and 630ms depending on the HZ setting.
Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.
[ tglx: Massaged comment and changelog ]
Fixes: a683f390b93f ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Lingutla Chandrasekhar <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Anna-Maria Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/time/timer.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1886,6 +1886,12 @@ int timers_dead_cpu(unsigned int cpu)
raw_spin_lock_irq(&new_base->lock);
raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
+ /*
+ * The current CPUs base clock might be stale. Update it
+ * before moving the timers over.
+ */
+ forward_timer_base(new_base);
+
BUG_ON(old_base->running_timer);
for (i = 0; i < WHEEL_SIZE; i++)
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Lin <[email protected]>
commit 0d84b9e5631d923744767dc6608672df906dd092 upstream.
Add num_caps field for dw_mci_drv_data to validate the controller
id from DT alias and non-DT ways.
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Shawn Lin <[email protected]>
Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks")
Cc: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc-exynos.c | 1 +
drivers/mmc/host/dw_mmc-k3.c | 1 +
drivers/mmc/host/dw_mmc-rockchip.c | 1 +
drivers/mmc/host/dw_mmc-zx.c | 1 +
drivers/mmc/host/dw_mmc.c | 9 ++++++++-
drivers/mmc/host/dw_mmc.h | 2 ++
6 files changed, 14 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -487,6 +487,7 @@ static unsigned long exynos_dwmmc_caps[4
static const struct dw_mci_drv_data exynos_drv_data = {
.caps = exynos_dwmmc_caps,
+ .num_caps = ARRAY_SIZE(exynos_dwmmc_caps),
.init = dw_mci_exynos_priv_init,
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -210,6 +210,7 @@ static int dw_mci_hi6220_execute_tuning(
static const struct dw_mci_drv_data hi6220_data = {
.caps = dw_mci_hi6220_caps,
+ .num_caps = ARRAY_SIZE(dw_mci_hi6220_caps),
.switch_voltage = dw_mci_hi6220_switch_voltage,
.set_ios = dw_mci_hi6220_set_ios,
.parse_dt = dw_mci_hi6220_parse_dt,
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -319,6 +319,7 @@ static const struct dw_mci_drv_data rk29
static const struct dw_mci_drv_data rk3288_drv_data = {
.caps = dw_mci_rk3288_dwmmc_caps,
+ .num_caps = ARRAY_SIZE(dw_mci_rk3288_dwmmc_caps),
.set_ios = dw_mci_rk3288_set_ios,
.execute_tuning = dw_mci_rk3288_execute_tuning,
.parse_dt = dw_mci_rk3288_parse_dt,
--- a/drivers/mmc/host/dw_mmc-zx.c
+++ b/drivers/mmc/host/dw_mmc-zx.c
@@ -195,6 +195,7 @@ static unsigned long zx_dwmmc_caps[3] =
static const struct dw_mci_drv_data zx_drv_data = {
.caps = zx_dwmmc_caps,
+ .num_caps = ARRAY_SIZE(zx_dwmmc_caps),
.execute_tuning = dw_mci_zx_execute_tuning,
.prepare_hs400_tuning = dw_mci_zx_prepare_hs400_tuning,
.parse_dt = dw_mci_zx_parse_dt,
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2808,8 +2808,15 @@ static int dw_mci_init_slot_caps(struct
} else {
ctrl_id = to_platform_device(host->dev)->id;
}
- if (drv_data && drv_data->caps)
+
+ if (drv_data && drv_data->caps) {
+ if (ctrl_id >= drv_data->num_caps) {
+ dev_err(host->dev, "invalid controller id %d\n",
+ ctrl_id);
+ return -EINVAL;
+ }
mmc->caps |= drv_data->caps[ctrl_id];
+ }
if (host->pdata->caps2)
mmc->caps2 = host->pdata->caps2;
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -543,6 +543,7 @@ struct dw_mci_slot {
/**
* dw_mci driver data - dw-mshc implementation specific driver data.
* @caps: mmc subsystem specified capabilities of the controller(s).
+ * @num_caps: number of capabilities specified by @caps.
* @init: early implementation specific initialization.
* @set_ios: handle bus specific extensions.
* @parse_dt: parse implementation specific device tree properties.
@@ -554,6 +555,7 @@ struct dw_mci_slot {
*/
struct dw_mci_drv_data {
unsigned long *caps;
+ u32 num_caps;
int (*init)(struct dw_mci *host);
void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
int (*parse_dt)(struct dw_mci *host);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Lin <[email protected]>
commit 5b43df8b4c1a7f0c3fbf793c9566068e6b1e570c upstream.
cat /sys/kernel/debug/mmc0/regs will hang up the system since
it's in runtime suspended state, so the genpd and biu_clk is
off. This patch fixes this problem by calling pm_runtime_get_sync
to wake it up before reading the registers.
Fixes: e9ed8835e990 ("mmc: dw_mmc: add runtime PM callback")
Cc: <[email protected]>
Signed-off-by: Shawn Lin <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -165,6 +165,8 @@ static int dw_mci_regs_show(struct seq_f
{
struct dw_mci *host = s->private;
+ pm_runtime_get_sync(host->dev);
+
seq_printf(s, "STATUS:\t0x%08x\n", mci_readl(host, STATUS));
seq_printf(s, "RINTSTS:\t0x%08x\n", mci_readl(host, RINTSTS));
seq_printf(s, "CMD:\t0x%08x\n", mci_readl(host, CMD));
@@ -172,6 +174,8 @@ static int dw_mci_regs_show(struct seq_f
seq_printf(s, "INTMASK:\t0x%08x\n", mci_readl(host, INTMASK));
seq_printf(s, "CLKENA:\t0x%08x\n", mci_readl(host, CLKENA));
+ pm_runtime_put_autosuspend(host->dev);
+
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <[email protected]>
commit 325501d9360eb42c7c51e6daa0d733844c1e790b upstream.
The hs_timing_cfg[] array is indexed using a value derived from the
"mshcN" alias in DT, which may lead to an out-of-bounds access.
Fix this by adding a range check.
Fixes: 361c7fe9b02eee7e ("mmc: dw_mmc-k3: add sd support for hi3660")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Shawn Lin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/dw_mmc-k3.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -135,6 +135,9 @@ static int dw_mci_hi6220_parse_dt(struct
if (priv->ctrl_id < 0)
priv->ctrl_id = 0;
+ if (priv->ctrl_id >= TIMING_MODE)
+ return -EINVAL;
+
host->priv = priv;
return 0;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anna-Maria Gleixner <[email protected]>
commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream.
The POSIX specification defines that relative CLOCK_REALTIME timers are not
affected by clock modifications. Those timers have to use CLOCK_MONOTONIC
to ensure POSIX compliance.
The introduction of the additional HRTIMER_MODE_PINNED mode broke this
requirement for pinned timers.
There is no user space visible impact because user space timers are not
using pinned mode, but for consistency reasons this needs to be fixed.
Check whether the mode has the HRTIMER_MODE_REL bit set instead of
comparing with HRTIMER_MODE_ABS.
Signed-off-by: Anna-Maria Gleixner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: 597d0275736d ("timers: Framework for identifying pinned timers")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/time/hrtimer.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -1104,7 +1104,12 @@ static void __hrtimer_init(struct hrtime
cpu_base = raw_cpu_ptr(&hrtimer_bases);
- if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
+ /*
+ * POSIX magic: Relative CLOCK_REALTIME timers are not affected by
+ * clock modifications, so they needs to become CLOCK_MONOTONIC to
+ * ensure POSIX compliance.
+ */
+ if (clock_id == CLOCK_REALTIME && mode & HRTIMER_MODE_REL)
clock_id = CLOCK_MONOTONIC;
base = hrtimer_clockid_to_base(clock_id);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 350144069abf351c743d766b2fba9cb9b7cd32a1 upstream.
The commit change for supporting the multiple ports moved involved
some code shuffling, and there the initializations of spinlock and
mutex in snd_intelhad object were dropped mistakenly.
This patch adds the missing initializations again for each port.
Fixes: b4eb0d522fcb ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/x86/intel_hdmi_audio.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -1827,6 +1827,8 @@ static int hdmi_lpe_audio_probe(struct p
ctx->port = port;
ctx->pipe = -1;
+ spin_lock_init(&ctx->had_spinlock);
+ mutex_init(&ctx->mutex);
INIT_WORK(&ctx->hdmi_audio_wq, had_audio_wq);
ret = snd_pcm_new(card, INTEL_HAD, port, MAX_PB_STREAMS,
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adrian Hunter <[email protected]>
commit f8870ae6e2d6be75b1accc2db981169fdfbea7ab upstream.
Tuning can leave the IP in an active state (Buffer Read Enable bit set)
which prevents the entry to low power states (i.e. S0i3). Data reset will
clear it.
Generally tuning is followed by a data transfer which will anyway sort out
the state, so it is rare that S0i3 is actually prevented.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-pci-core.c | 35 +++++++++++++++++++++++++++++++----
1 file changed, 31 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -593,9 +593,36 @@ static void byt_read_dsm(struct sdhci_pc
slot->chip->rpm_retune = intel_host->d3_retune;
}
-static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
+static int intel_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ int err = sdhci_execute_tuning(mmc, opcode);
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (err)
+ return err;
+
+ /*
+ * Tuning can leave the IP in an active state (Buffer Read Enable bit
+ * set) which prevents the entry to low power states (i.e. S0i3). Data
+ * reset will clear it.
+ */
+ sdhci_reset(host, SDHCI_RESET_DATA);
+
+ return 0;
+}
+
+static void byt_probe_slot(struct sdhci_pci_slot *slot)
{
+ struct mmc_host_ops *ops = &slot->host->mmc_host_ops;
+
byt_read_dsm(slot);
+
+ ops->execute_tuning = intel_execute_tuning;
+}
+
+static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
+{
+ byt_probe_slot(slot);
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
MMC_CAP_CMD_DURING_TFR |
@@ -650,7 +677,7 @@ static int ni_byt_sdio_probe_slot(struct
{
int err;
- byt_read_dsm(slot);
+ byt_probe_slot(slot);
err = ni_set_max_freq(slot);
if (err)
@@ -663,7 +690,7 @@ static int ni_byt_sdio_probe_slot(struct
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- byt_read_dsm(slot);
+ byt_probe_slot(slot);
slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
MMC_CAP_WAIT_WHILE_BUSY;
return 0;
@@ -671,7 +698,7 @@ static int byt_sdio_probe_slot(struct sd
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
- byt_read_dsm(slot);
+ byt_probe_slot(slot);
slot->host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY |
MMC_CAP_AGGRESSIVE_PM | MMC_CAP_CD_WAKE;
slot->cd_idx = 0;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream.
On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.
This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.
Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128
But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.
The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.
[ added an ifdef CONFIG_PM for the build error -- tiwai]
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: [email protected]
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -181,7 +181,7 @@ static const struct kernel_param_ops par
};
#define param_check_xint param_check_int
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+static int power_save = -1;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
@@ -2186,6 +2186,24 @@ out_free:
return err;
}
+#ifdef CONFIG_PM
+/* On some boards setting power_save to a non 0 value leads to clicking /
+ * popping sounds when ever we enter/leave powersaving mode. Ideally we would
+ * figure out how to avoid these sounds, but that is not always feasible.
+ * So we keep a list of devices where we disable powersaving as its known
+ * to causes problems on these devices.
+ */
+static struct snd_pci_quirk power_save_blacklist[] = {
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
+ SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */
+ SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0),
+ {}
+};
+#endif /* CONFIG_PM */
+
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
[AZX_DRIVER_NVIDIA] = 8,
@@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx
struct hdac_bus *bus = azx_bus(chip);
struct pci_dev *pci = chip->pci;
int dev = chip->dev_index;
+ int val;
int err;
hda->probe_continued = 1;
@@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx
chip->running = 1;
azx_add_card_list(chip);
- snd_hda_set_power_save(&chip->bus, power_save * 1000);
+
+ val = power_save;
+#ifdef CONFIG_PM
+ if (val == -1) {
+ const struct snd_pci_quirk *q;
+
+ val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+ q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist);
+ if (q && val) {
+ dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n",
+ q->subvendor, q->subdevice);
+ val = 0;
+ }
+ }
+#endif /* CONFIG_PM */
+ snd_hda_set_power_save(&chip->bus, val * 1000);
if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo)
pm_runtime_put_autosuspend(&pci->dev);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <[email protected]>
commit 71db96ddfa72671bd43cacdcc99ca178d90ba267 upstream.
We've added a quirk to enable the recent Lenovo dock support, where it
overwrites the pin configs of NID 0x17 and 19, not only updating the
pin config cache. It works right after the boot, but the problem is
that the pin configs are occasionally cleared when the machine goes to
PM. Meanwhile the quirk writes the pin configs only at the pre-probe,
so this won't be applied any longer.
For addressing that issue, this patch moves the code to overwrite the
pin configs into HDA_FIXUP_ACT_INIT section so that it's always
applied at both probe and resume time.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161
Fixes: 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4875,13 +4875,14 @@ static void alc_fixup_tpt470_dock(struct
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP;
+ snd_hda_apply_pincfgs(codec, pincfgs);
+ } else if (action == HDA_FIXUP_ACT_INIT) {
/* Enable DOCK device */
snd_hda_codec_write(codec, 0x17, 0,
AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
/* Enable DOCK device */
snd_hda_codec_write(codec, 0x19, 0,
AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0);
- snd_hda_apply_pincfgs(codec, pincfgs);
}
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald <[email protected]>
commit 5a23699a39abc5328921a81b89383d088f6ba9cc upstream.
The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE
operations" introduced a potential for kernel memory corruption due
to an incorrect if statement allowing non-readable controls to fall
through and call the get function. For TLV controls a driver can omit
SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function
can be called. Instead the normal get() can be invoked unexpectedly
and as the driver expects that this will only be called for controls
<= 512 bytes, potentially try to copy >512 bytes into the 512 byte
return array, so corrupting kernel memory.
The problem is an attempt to refactor the snd_ctl_elem_read function
to invert the logic so that it conditionally aborted if the control
is unreadable instead of conditionally executing. But the if statement
wasn't inverted correctly.
The correct inversion of
if (a && !b)
is
if (!a || b)
Fixes: becf9e5d553c2 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations")
Signed-off-by: Richard Fitzgerald <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/control.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -888,7 +888,7 @@ static int snd_ctl_elem_read(struct snd_
index_offset = snd_ctl_get_ioff(kctl, &control->id);
vd = &kctl->vd[index_offset];
- if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) && kctl->get == NULL)
+ if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) || kctl->get == NULL)
return -EPERM;
snd_ctl_build_ioff(&control->id, kctl, index_offset);
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Veijola <[email protected]>
commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream.
The capture interface doesn't work and the playback interface only
supports 48 kHz sampling rate even though it advertises more rates.
Signed-off-by: Erik Veijola <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks-table.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3277,4 +3277,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge
}
},
+{
+ /*
+ * Bower's & Wilkins PX headphones only support the 48 kHz sample rate
+ * even though it advertises more. The capture interface doesn't work
+ * even on windows.
+ */
+ USB_DEVICE(0x19b5, 0x0021),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_STANDARD_MIXER,
+ },
+ /* Capture */
+ {
+ .ifnum = 1,
+ .type = QUIRK_IGNORE_INTERFACE,
+ },
+ /* Playback */
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .channels = 2,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_FILL_MAX |
+ UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x03,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) {
+ 48000
+ }
+ }
+ },
+ }
+ }
+},
+
#undef USB_DEVICE_VENDOR_SPEC
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Boone <[email protected]>
commit f9d4d9b5a5ef2f017bc344fb65a58a902517173b upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_i2c_nuvoton.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_i2c_nuvoton.c
+++ b/drivers/char/tpm/tpm_i2c_nuvoton.c
@@ -281,7 +281,11 @@ static int i2c_nuvoton_recv(struct tpm_c
struct device *dev = chip->dev.parent;
struct i2c_client *client = to_i2c_client(dev);
s32 rc;
- int expected, status, burst_count, retries, size = 0;
+ int status;
+ int burst_count;
+ int retries;
+ int size = 0;
+ u32 expected;
if (count < TPM_HEADER_SIZE) {
i2c_nuvoton_ready(chip); /* return to idle */
@@ -323,7 +327,7 @@ static int i2c_nuvoton_recv(struct tpm_c
* to machine native
*/
expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count) {
+ if (expected > count || expected < size) {
dev_err(dev, "%s() expected > count\n", __func__);
size = -EIO;
continue;
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Boone <[email protected]>
commit 6bb320ca4a4a7b5b3db8c8d7250cc40002046878 upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
Tested-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_tis_core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -202,7 +202,8 @@ static int tpm_tis_recv(struct tpm_chip
{
struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
int size = 0;
- int expected, status;
+ int status;
+ u32 expected;
if (count < TPM_HEADER_SIZE) {
size = -EIO;
@@ -217,7 +218,7 @@ static int tpm_tis_recv(struct tpm_chip
}
expected = be32_to_cpu(*(__be32 *) (buf + 2));
- if (expected > count) {
+ if (expected > count || expected < TPM_HEADER_SIZE) {
size = -EIO;
goto out;
}
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Adam Borowski <[email protected]>
commit 3a129cc2151425e5aeb69aeb25fbc994ec738137 upstream.
Like %pK already does, print "00000000" instead.
This confused people -- the convention is that "(null)" means you tried to
dereference a null pointer as opposed to printing the address.
Link: http://lkml.kernel.org/r/[email protected]
To: Sergey Senozhatsky <[email protected]>
To: Steven Rostedt <[email protected]>
To: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: "Roberts, William C" <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: David Laight <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Signed-off-by: Adam Borowski <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/vsprintf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -1849,7 +1849,7 @@ char *pointer(const char *fmt, char *buf
{
const int default_width = 2 * sizeof(void *);
- if (!ptr && *fmt != 'K') {
+ if (!ptr && *fmt != 'K' && *fmt != 'x') {
/*
* Print (null) with the same width as a pointer so it makes
* tabular output look nice.
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Boone <[email protected]>
commit 9b8cb28d7c62568a5916bdd7ea1c9176d7f8f2ed upstream.
Discrete TPMs are often connected over slow serial buses which, on
some platforms, can have glitches causing bit flips. In all the
driver _recv() functions, we need to use a u32 to unmarshal the
response size, otherwise a bit flip of the 31st bit would cause the
expected variable to go negative, which would then try to read a huge
amount of data. Also sanity check that the expected amount of data is
large enough for the TPM header.
Signed-off-by: Jeremy Boone <[email protected]>
Cc: [email protected]
Signed-off-by: James Bottomley <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/tpm/tpm_i2c_infineon.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/char/tpm/tpm_i2c_infineon.c
+++ b/drivers/char/tpm/tpm_i2c_infineon.c
@@ -473,7 +473,8 @@ static int recv_data(struct tpm_chip *ch
static int tpm_tis_i2c_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
int size = 0;
- int expected, status;
+ int status;
+ u32 expected;
if (count < TPM_HEADER_SIZE) {
size = -EIO;
@@ -488,7 +489,7 @@ static int tpm_tis_i2c_recv(struct tpm_c
}
expected = be32_to_cpu(*(__be32 *)(buf + 2));
- if ((size_t) expected > count) {
+ if (((size_t) expected > count) || (expected < TPM_HEADER_SIZE)) {
size = -EIO;
goto out;
}
On 03/07/2018 12:36 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.8 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
Greg,
Can you please make sure that the one that came in right after this is also applied at the same time?
https://www.spinics.net/lists/stable/msg215268.html
As you recommended before they weren't squashed together, but they should both come in at the
same time.
Thanks,
> -----Original Message-----
> From: Greg Kroah-Hartman [mailto:[email protected]]
> Sent: Thursday, March 8, 2018 3:37 AM
> To: [email protected]
> Cc: Greg Kroah-Hartman <[email protected]>; [email protected];
> Pali Rohar <[email protected]>; Limonciello, Mario
> <[email protected]>; Andy Shevchenko
> <[email protected]>
> Subject: [PATCH 4.15 004/122] platform/x86: dell-laptop: Allocate buffer on heap
> rather than globally
>
> 4.15-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Mario Limonciello <[email protected]>
>
> commit 9862b43624a5450a097cc4122732857b869dbbca upstream.
>
> There is no longer a need for the buffer to be defined in
> first 4GB physical address space.
>
> Furthermore there may be race conditions with multiple different functions
> working on a module wide buffer causing incorrect results.
>
> Fixes: 549b4930f057658dc50d8010e66219233119a4d8
> Suggested-by: Pali Rohar <[email protected]>
> Signed-off-by: Mario Limonciello <[email protected]>
> Signed-off-by: Andy Shevchenko <[email protected]>
> Signed-off-by: Greg Kroah-Hartman <[email protected]>
>
>
> ---
> drivers/platform/x86/dell-laptop.c | 188 ++++++++++++++++++++-----------------
> 1 file changed, 103 insertions(+), 85 deletions(-)
>
> --- a/drivers/platform/x86/dell-laptop.c
> +++ b/drivers/platform/x86/dell-laptop.c
> @@ -78,7 +78,6 @@ static struct platform_driver platform_d
> }
> };
>
> -static struct calling_interface_buffer *buffer;
> static struct platform_device *platform_device;
> static struct backlight_device *dell_backlight_device;
> static struct rfkill *wifi_rfkill;
> @@ -286,7 +285,8 @@ static const struct dmi_system_id dell_q
> { }
> };
>
> -void dell_set_arguments(u32 arg0, u32 arg1, u32 arg2, u32 arg3)
> +static void dell_fill_request(struct calling_interface_buffer *buffer,
> + u32 arg0, u32 arg1, u32 arg2, u32 arg3)
> {
> memset(buffer, 0, sizeof(struct calling_interface_buffer));
> buffer->input[0] = arg0;
> @@ -295,7 +295,8 @@ void dell_set_arguments(u32 arg0, u32 ar
> buffer->input[3] = arg3;
> }
>
> -int dell_send_request(u16 class, u16 select)
> +static int dell_send_request(struct calling_interface_buffer *buffer,
> + u16 class, u16 select)
> {
> int ret;
>
> @@ -432,21 +433,22 @@ static int dell_rfkill_set(void *data, b
> int disable = blocked ? 1 : 0;
> unsigned long radio = (unsigned long)data;
> int hwswitch_bit = (unsigned long)data - 1;
> + struct calling_interface_buffer buffer;
> int hwswitch;
> int status;
> int ret;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> if (ret)
> return ret;
> - status = buffer->output[1];
> + status = buffer.output[1];
>
> - dell_set_arguments(0x2, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 0x2, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> if (ret)
> return ret;
> - hwswitch = buffer->output[1];
> + hwswitch = buffer.output[1];
>
> /* If the hardware switch controls this radio, and the hardware
> switch is disabled, always disable the radio */
> @@ -454,8 +456,8 @@ static int dell_rfkill_set(void *data, b
> (status & BIT(0)) && !(status & BIT(16)))
> disable = 1;
>
> - dell_set_arguments(1 | (radio<<8) | (disable << 16), 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 1 | (radio<<8) | (disable << 16), 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> return ret;
> }
>
> @@ -464,9 +466,11 @@ static void dell_rfkill_update_sw_state(
> {
> if (status & BIT(0)) {
> /* Has hw-switch, sync sw_state to BIOS */
> + struct calling_interface_buffer buffer;
> int block = rfkill_blocked(rfkill);
> - dell_set_arguments(1 | (radio << 8) | (block << 16), 0, 0, 0);
> - dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer,
> + 1 | (radio << 8) | (block << 16), 0, 0, 0);
> + dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> } else {
> /* No hw-switch, sync BIOS state to sw_state */
> rfkill_set_sw_state(rfkill, !!(status & BIT(radio + 16)));
> @@ -483,21 +487,22 @@ static void dell_rfkill_update_hw_state(
> static void dell_rfkill_query(struct rfkill *rfkill, void *data)
> {
> int radio = ((unsigned long)data & 0xF);
> + struct calling_interface_buffer buffer;
> int hwswitch;
> int status;
> int ret;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> - status = buffer->output[1];
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> + status = buffer.output[1];
>
> if (ret != 0 || !(status & BIT(0))) {
> return;
> }
>
> - dell_set_arguments(0, 0x2, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> - hwswitch = buffer->output[1];
> + dell_fill_request(&buffer, 0, 0x2, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> + hwswitch = buffer.output[1];
>
> if (ret != 0)
> return;
> @@ -514,22 +519,23 @@ static struct dentry *dell_laptop_dir;
>
> static int dell_debugfs_show(struct seq_file *s, void *data)
> {
> + struct calling_interface_buffer buffer;
> int hwswitch_state;
> int hwswitch_ret;
> int status;
> int ret;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> if (ret)
> return ret;
> - status = buffer->output[1];
> + status = buffer.output[1];
>
> - dell_set_arguments(0, 0x2, 0, 0);
> - hwswitch_ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 0, 0x2, 0, 0);
> + hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> if (hwswitch_ret)
> return hwswitch_ret;
> - hwswitch_state = buffer->output[1];
> + hwswitch_state = buffer.output[1];
>
> seq_printf(s, "return:\t%d\n", ret);
> seq_printf(s, "status:\t0x%X\n", status);
> @@ -610,22 +616,23 @@ static const struct file_operations dell
>
> static void dell_update_rfkill(struct work_struct *ignored)
> {
> + struct calling_interface_buffer buffer;
> int hwswitch = 0;
> int status;
> int ret;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> - status = buffer->output[1];
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> + status = buffer.output[1];
>
> if (ret != 0)
> return;
>
> - dell_set_arguments(0, 0x2, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> + dell_fill_request(&buffer, 0, 0x2, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
>
> if (ret == 0 && (status & BIT(0)))
> - hwswitch = buffer->output[1];
> + hwswitch = buffer.output[1];
>
> if (wifi_rfkill) {
> dell_rfkill_update_hw_state(wifi_rfkill, 1, status, hwswitch);
> @@ -683,6 +690,7 @@ static struct notifier_block dell_laptop
>
> static int __init dell_setup_rfkill(void)
> {
> + struct calling_interface_buffer buffer;
> int status, ret, whitelisted;
> const char *product;
>
> @@ -698,9 +706,9 @@ static int __init dell_setup_rfkill(void
> if (!force_rfkill && !whitelisted)
> return 0;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_INFO, SELECT_RFKILL);
> - status = buffer->output[1];
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
> + status = buffer.output[1];
>
> /* dell wireless info smbios call is not supported */
> if (ret != 0)
> @@ -853,6 +861,7 @@ static void dell_cleanup_rfkill(void)
>
> static int dell_send_intensity(struct backlight_device *bd)
> {
> + struct calling_interface_buffer buffer;
> struct calling_interface_token *token;
> int ret;
>
> @@ -860,17 +869,21 @@ static int dell_send_intensity(struct ba
> if (!token)
> return -ENODEV;
>
> - dell_set_arguments(token->location, bd->props.brightness, 0, 0);
> + dell_fill_request(&buffer,
> + token->location, bd->props.brightness, 0, 0);
> if (power_supply_is_system_supplied() > 0)
> - ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_AC);
> + ret = dell_send_request(&buffer,
> + CLASS_TOKEN_WRITE,
> SELECT_TOKEN_AC);
> else
> - ret = dell_send_request(CLASS_TOKEN_WRITE,
> SELECT_TOKEN_BAT);
> + ret = dell_send_request(&buffer,
> + CLASS_TOKEN_WRITE,
> SELECT_TOKEN_BAT);
>
> return ret;
> }
>
> static int dell_get_intensity(struct backlight_device *bd)
> {
> + struct calling_interface_buffer buffer;
> struct calling_interface_token *token;
> int ret;
>
> @@ -878,14 +891,17 @@ static int dell_get_intensity(struct bac
> if (!token)
> return -ENODEV;
>
> - dell_set_arguments(token->location, 0, 0, 0);
> + dell_fill_request(&buffer, token->location, 0, 0, 0);
> if (power_supply_is_system_supplied() > 0)
> - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC);
> + ret = dell_send_request(&buffer,
> + CLASS_TOKEN_READ, SELECT_TOKEN_AC);
> else
> - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_BAT);
> + ret = dell_send_request(&buffer,
> + CLASS_TOKEN_READ,
> SELECT_TOKEN_BAT);
>
> if (ret == 0)
> - ret = buffer->output[1];
> + ret = buffer.output[1];
> +
> return ret;
> }
>
> @@ -1149,31 +1165,33 @@ static DEFINE_MUTEX(kbd_led_mutex);
>
> static int kbd_get_info(struct kbd_info *info)
> {
> + struct calling_interface_buffer buffer;
> u8 units;
> int ret;
>
> - dell_set_arguments(0, 0, 0, 0);
> - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer,
> + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
> if (ret)
> return ret;
>
> - info->modes = buffer->output[1] & 0xFFFF;
> - info->type = (buffer->output[1] >> 24) & 0xFF;
> - info->triggers = buffer->output[2] & 0xFF;
> - units = (buffer->output[2] >> 8) & 0xFF;
> - info->levels = (buffer->output[2] >> 16) & 0xFF;
> + info->modes = buffer.output[1] & 0xFFFF;
> + info->type = (buffer.output[1] >> 24) & 0xFF;
> + info->triggers = buffer.output[2] & 0xFF;
> + units = (buffer.output[2] >> 8) & 0xFF;
> + info->levels = (buffer.output[2] >> 16) & 0xFF;
>
> if (quirks && quirks->kbd_led_levels_off_1 && info->levels)
> info->levels--;
>
> if (units & BIT(0))
> - info->seconds = (buffer->output[3] >> 0) & 0xFF;
> + info->seconds = (buffer.output[3] >> 0) & 0xFF;
> if (units & BIT(1))
> - info->minutes = (buffer->output[3] >> 8) & 0xFF;
> + info->minutes = (buffer.output[3] >> 8) & 0xFF;
> if (units & BIT(2))
> - info->hours = (buffer->output[3] >> 16) & 0xFF;
> + info->hours = (buffer.output[3] >> 16) & 0xFF;
> if (units & BIT(3))
> - info->days = (buffer->output[3] >> 24) & 0xFF;
> + info->days = (buffer.output[3] >> 24) & 0xFF;
>
> return ret;
> }
> @@ -1233,31 +1251,34 @@ static int kbd_set_level(struct kbd_stat
>
> static int kbd_get_state(struct kbd_state *state)
> {
> + struct calling_interface_buffer buffer;
> int ret;
>
> - dell_set_arguments(0x1, 0, 0, 0);
> - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
> + dell_fill_request(&buffer, 0, 0, 0, 0);
> + ret = dell_send_request(&buffer,
> + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
> if (ret)
> return ret;
>
> - state->mode_bit = ffs(buffer->output[1] & 0xFFFF);
> + state->mode_bit = ffs(buffer.output[1] & 0xFFFF);
> if (state->mode_bit != 0)
> state->mode_bit--;
>
> - state->triggers = (buffer->output[1] >> 16) & 0xFF;
> - state->timeout_value = (buffer->output[1] >> 24) & 0x3F;
> - state->timeout_unit = (buffer->output[1] >> 30) & 0x3;
> - state->als_setting = buffer->output[2] & 0xFF;
> - state->als_value = (buffer->output[2] >> 8) & 0xFF;
> - state->level = (buffer->output[2] >> 16) & 0xFF;
> - state->timeout_value_ac = (buffer->output[2] >> 24) & 0x3F;
> - state->timeout_unit_ac = (buffer->output[2] >> 30) & 0x3;
> + state->triggers = (buffer.output[1] >> 16) & 0xFF;
> + state->timeout_value = (buffer.output[1] >> 24) & 0x3F;
> + state->timeout_unit = (buffer.output[1] >> 30) & 0x3;
> + state->als_setting = buffer.output[2] & 0xFF;
> + state->als_value = (buffer.output[2] >> 8) & 0xFF;
> + state->level = (buffer.output[2] >> 16) & 0xFF;
> + state->timeout_value_ac = (buffer.output[2] >> 24) & 0x3F;
> + state->timeout_unit_ac = (buffer.output[2] >> 30) & 0x3;
>
> return ret;
> }
>
> static int kbd_set_state(struct kbd_state *state)
> {
> + struct calling_interface_buffer buffer;
> int ret;
> u32 input1;
> u32 input2;
> @@ -1270,8 +1291,9 @@ static int kbd_set_state(struct kbd_stat
> input2 |= (state->level & 0xFF) << 16;
> input2 |= (state->timeout_value_ac & 0x3F) << 24;
> input2 |= (state->timeout_unit_ac & 0x3) << 30;
> - dell_set_arguments(0x2, input1, input2, 0);
> - ret = dell_send_request(CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
> + dell_fill_request(&buffer, 0x2, input1, input2, 0);
> + ret = dell_send_request(&buffer,
> + CLASS_KBD_BACKLIGHT, SELECT_KBD_BACKLIGHT);
>
> return ret;
> }
> @@ -1298,6 +1320,7 @@ static int kbd_set_state_safe(struct kbd
>
> static int kbd_set_token_bit(u8 bit)
> {
> + struct calling_interface_buffer buffer;
> struct calling_interface_token *token;
> int ret;
>
> @@ -1308,14 +1331,15 @@ static int kbd_set_token_bit(u8 bit)
> if (!token)
> return -EINVAL;
>
> - dell_set_arguments(token->location, token->value, 0, 0);
> - ret = dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
> + dell_fill_request(&buffer, token->location, token->value, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_TOKEN_WRITE,
> SELECT_TOKEN_STD);
>
> return ret;
> }
>
> static int kbd_get_token_bit(u8 bit)
> {
> + struct calling_interface_buffer buffer;
> struct calling_interface_token *token;
> int ret;
> int val;
> @@ -1327,9 +1351,9 @@ static int kbd_get_token_bit(u8 bit)
> if (!token)
> return -EINVAL;
>
> - dell_set_arguments(token->location, 0, 0, 0);
> - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_STD);
> - val = buffer->output[1];
> + dell_fill_request(&buffer, token->location, 0, 0, 0);
> + ret = dell_send_request(&buffer, CLASS_TOKEN_READ,
> SELECT_TOKEN_STD);
> + val = buffer.output[1];
>
> if (ret)
> return ret;
> @@ -2046,6 +2070,7 @@ static struct notifier_block dell_laptop
>
> int dell_micmute_led_set(int state)
> {
> + struct calling_interface_buffer buffer;
> struct calling_interface_token *token;
>
> if (state == 0)
> @@ -2058,8 +2083,8 @@ int dell_micmute_led_set(int state)
> if (!token)
> return -ENODEV;
>
> - dell_set_arguments(token->location, token->value, 0, 0);
> - dell_send_request(CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
> + dell_fill_request(&buffer, token->location, token->value, 0, 0);
> + dell_send_request(&buffer, CLASS_TOKEN_WRITE, SELECT_TOKEN_STD);
>
> return state;
> }
> @@ -2090,13 +2115,6 @@ static int __init dell_init(void)
> if (ret)
> goto fail_platform_device2;
>
> - buffer = kzalloc(sizeof(struct calling_interface_buffer), GFP_KERNEL);
> - if (!buffer) {
> - ret = -ENOMEM;
> - goto fail_buffer;
> - }
> -
> -
> ret = dell_setup_rfkill();
>
> if (ret) {
> @@ -2121,10 +2139,13 @@ static int __init dell_init(void)
>
> token = dell_smbios_find_token(BRIGHTNESS_TOKEN);
> if (token) {
> - dell_set_arguments(token->location, 0, 0, 0);
> - ret = dell_send_request(CLASS_TOKEN_READ, SELECT_TOKEN_AC);
> + struct calling_interface_buffer buffer;
> +
> + dell_fill_request(&buffer, token->location, 0, 0, 0);
> + ret = dell_send_request(&buffer,
> + CLASS_TOKEN_READ, SELECT_TOKEN_AC);
> if (ret)
> - max_intensity = buffer->output[3];
> + max_intensity = buffer.output[3];
> }
>
> if (max_intensity) {
> @@ -2158,8 +2179,6 @@ static int __init dell_init(void)
> fail_get_brightness:
> backlight_device_unregister(dell_backlight_device);
> fail_backlight:
> - kfree(buffer);
> -fail_buffer:
> dell_cleanup_rfkill();
> fail_rfkill:
> platform_device_del(platform_device);
> @@ -2179,7 +2198,6 @@ static void __exit dell_exit(void)
> touchpad_led_exit();
> kbd_led_exit();
> backlight_device_unregister(dell_backlight_device);
> - kfree(buffer);
> dell_cleanup_rfkill();
> if (platform_device) {
> platform_device_unregister(platform_device);
>
On Thu, Mar 08, 2018 at 01:14:39AM +0000, [email protected] wrote:
> Greg,
>
> Can you please make sure that the one that came in right after this is also applied at the same time?
> https://www.spinics.net/lists/stable/msg215268.html
>
> As you recommended before they weren't squashed together, but they should both come in at the
> same time.
Oops, for some reason I thought that was going to have a stable@ tag on
it. Now queued up.
greg k-h
On 8 March 2018 at 01:06, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 4.15.8 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.
NOTE:
qemu_x86_64 LTP syscalls and fs tests failed (due to infrastructure issues) have
been resubmitted and updated results summary.
Summary
------------------------------------------------------------------------
kernel: 4.15.8-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.15.y
git commit: 443c8ee3e9ef992816cca25f928f6870a3eb5c54
git describe: v4.15.7-123-g443c8ee3e9ef
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.15-oe/build/v4.15.7-123-g443c8ee3e9ef
No regressions (compared to build v4.15.7)
Boards, architectures and test suites:
-------------------------------------
dragonboard-410c
* boot - pass: 20,
* kselftest - pass: 46, skip: 19
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 2
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1002, skip: 148
* ltp-timers-tests - pass: 12, skip: 1
hi6220-hikey - arm64
* boot - pass: 20,
* kselftest - pass: 57, skip: 9
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 2
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 999, skip: 151
* ltp-timers-tests - pass: 12, skip: 1
juno-r2 - arm64
* boot - pass: 20,
* kselftest - pass: 56, skip: 10
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 2
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1001, skip: 149
* ltp-timers-tests - pass: 12, skip: 1
qemu_x86_64
* boot - pass: 20,
* kselftest - pass: 68, skip: 14
* libhugetlbfs - pass: 90, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 57, skip: 6
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1002, skip: 148
* ltp-timers-tests - pass: 12, skip: 1
x15 - arm
* boot - pass: 20,
* kselftest - pass: 53, skip: 12
* libhugetlbfs - pass: 87, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 63, skip: 18
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 2
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 13, skip: 1
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1053, skip: 97
* ltp-timers-tests - pass: 12, skip: 1
x86_64
* boot - pass: 20,
* kselftest - pass: 71, skip: 10
* libhugetlbfs - pass: 89, skip: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 64, skip: 17
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 62, skip: 1
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 9, skip: 5
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1031, skip: 119
* ltp-timers-tests - pass: 12, skip: 1
--
Linaro QA (beta)
https://qa-reports.linaro.org
On Wed, Mar 07, 2018 at 11:36:52AM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.8 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
Merged, built on amd64, arm64, armhf, i386, ppc64el, s390x.
Cascardo.
On 03/07/2018 11:36 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.15.8 release.
> There are 122 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> Anything received after that time might be too late.
>
Build results:
total: 147 pass: 147 fail: 0
Qemu test results:
total: 141 pass: 141 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On Wed, Mar 07, 2018 at 04:56:41PM -0700, Shuah Khan wrote:
> On 03/07/2018 12:36 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.8 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing both of these.
greg k-h
On Thu, Mar 08, 2018 at 06:48:59AM -0800, Guenter Roeck wrote:
> On 03/07/2018 11:36 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.8 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 147 pass: 147 fail: 0
> Qemu test results:
> total: 141 pass: 141 fail: 0
>
> Details are available at http://kerneltests.org/builders.
Thanks for testing both of these and letting me know.
greg k-h
On Thu, Mar 08, 2018 at 07:35:41AM -0300, Thadeu Lima de Souza Cascardo wrote:
> On Wed, Mar 07, 2018 at 11:36:52AM -0800, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.15.8 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> > -------------
>
> Merged, built on amd64, arm64, armhf, i386, ppc64el, s390x.
What do you mean by "merged"?
And what are the results of the builds, do you boot them as well? If
you boot, are you running any tests on them? Is this QEMU only or "real
hardware"?
thanks,
greg k-h
On Thu, Mar 08, 2018 at 12:42:05PM +0530, Naresh Kamboju wrote:
> On 8 March 2018 at 01:06, Greg Kroah-Hartman <[email protected]> wrote:
> > This is the start of the stable review cycle for the 4.15.8 release.
> > There are 122 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.
>
> NOTE:
> qemu_x86_64 LTP syscalls and fs tests failed (due to infrastructure issues) have
> been resubmitted and updated results summary.
Thanks for testing both of these and letting me know.
greg k-h
On Thu, Mar 08, 2018 at 09:27:23AM -0800, Greg Kroah-Hartman wrote:
> On Thu, Mar 08, 2018 at 07:35:41AM -0300, Thadeu Lima de Souza Cascardo wrote:
> > On Wed, Mar 07, 2018 at 11:36:52AM -0800, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.15.8 release.
> > > There are 122 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > > Anything received after that time might be too late.
> > >
> > > The whole patch series can be found in one patch at:
> > > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> > > or in the git tree and branch at:
> > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > > and the diffstat can be found below.
> > >
> > > thanks,
> > >
> > > greg k-h
> > >
> > > -------------
> >
> > Merged, built on amd64, arm64, armhf, i386, ppc64el, s390x.
>
> What do you mean by "merged"?
That I merged it with Ubuntu changes as in
https://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/bionic.
>
> And what are the results of the builds, do you boot them as well? If
All builds succeeded. I was planning on reporting it if they failed, but
thought it would be useful to report that they succeeded just as well.
I have only booted the amd64 build on my own computer so far.
> you boot, are you running any tests on them? Is this QEMU only or "real
> hardware"?
>
We run tests on some (mostly virtual) machines for those different
architectures before they (the Ubuntu kernels) are released, but not on this
phase. In fact, we only merge them or do any build testing after they (your
stable releases) are tagged and pushed.
By my own account, I decided I would contribute somehow doing those build
tests, but might push for those tests to be run earlier, so we can report back
its results, if you find it would be useful.
Regards.
Cascardo.
> thanks,
>
> greg k-h
On Thu, Mar 08, 2018 at 02:42:03PM -0300, Thadeu Lima de Souza Cascardo wrote:
> On Thu, Mar 08, 2018 at 09:27:23AM -0800, Greg Kroah-Hartman wrote:
> > On Thu, Mar 08, 2018 at 07:35:41AM -0300, Thadeu Lima de Souza Cascardo wrote:
> > > On Wed, Mar 07, 2018 at 11:36:52AM -0800, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.15.8 release.
> > > > There are 122 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Fri Mar 9 19:16:43 UTC 2018.
> > > > Anything received after that time might be too late.
> > > >
> > > > The whole patch series can be found in one patch at:
> > > > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.15.8-rc1.gz
> > > > or in the git tree and branch at:
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.15.y
> > > > and the diffstat can be found below.
> > > >
> > > > thanks,
> > > >
> > > > greg k-h
> > > >
> > > > -------------
> > >
> > > Merged, built on amd64, arm64, armhf, i386, ppc64el, s390x.
> >
> > What do you mean by "merged"?
>
> That I merged it with Ubuntu changes as in
> https://git.launchpad.net/~ubuntu-kernel/ubuntu/+source/linux/+git/bionic.
Ah, that makes sense, testing the sum is a good idea. And I want to
know that type of result, thanks. I get that type of report from other
companies as well, and it's nice to see the testing spread to more,
thanks.
> > And what are the results of the builds, do you boot them as well? If
>
> All builds succeeded. I was planning on reporting it if they failed, but
> thought it would be useful to report that they succeeded just as well.
Sure, that's valid, just want to know what you are reporting :)
> > you boot, are you running any tests on them? Is this QEMU only or "real
> > hardware"?
> >
>
> We run tests on some (mostly virtual) machines for those different
> architectures before they (the Ubuntu kernels) are released, but not on this
> phase. In fact, we only merge them or do any build testing after they (your
> stable releases) are tagged and pushed.
>
> By my own account, I decided I would contribute somehow doing those build
> tests, but might push for those tests to be run earlier, so we can report back
> its results, if you find it would be useful.
I would, thanks. Look at how the Linaro results are displayed as an
example (maybe a bad one, it's a messy report) about what actually runs
and what is testing, to make it a bit more obvious as to what is going
on for anyone who might be curious.
thanks again for doing this, much appreciated.
greg k-h