LinuxLists.cc - [PATCH 0/3] media: i2c: tvp5150: resolve checkpatch errors

2018-04-02 20:01:48

Subject: [PATCH 0/3] media: i2c: tvp5150: resolve checkpatch errors

This patch series tries to resolve some checkpatch.pl errors and warnings.

Nasser Afshin (3):
media: i2c: tvp5150: Add a space after commas
media: i2c: tvp5150: Use the correct comment style
media: i2c: tvp5150: Use parentheses for sizeof

drivers/media/i2c/tvp5150.c | 159 +++++++++++++++++++++++---------------------
1 file changed, 82 insertions(+), 77 deletions(-)

--
2.15.0

2018-04-02 20:02:01

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH 2/3] media: i2c: tvp5150: Use the correct comment style

This patch resolves some checkpatch.pl warnings about comments.

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index af56a5a6db65..d561d87d219a 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -500,10 +500,12 @@ struct i2c_vbi_ram_value {
* and so on. There are 16 possible locations from 0 to 15.
*/

-static struct i2c_vbi_ram_value vbi_ram_default[] =
-{
- /* FIXME: Current api doesn't handle all VBI types, those not
- yet supported are placed under #if 0 */
+static struct i2c_vbi_ram_value vbi_ram_default[] = {
+
+ /*
+ * FIXME: Current api doesn't handle all VBI types, those not
+ * yet supported are placed under #if 0
+ */
#if 0
[0] = {0x010, /* Teletext, SECAM, WST System A */
{V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1},
@@ -1101,11 +1103,14 @@ static int tvp5150_s_routing(struct v4l2_subdev *sd,

static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
{
- /* this is for capturing 36 raw vbi lines
- if there's a way to cut off the beginning 2 vbi lines
- with the tvp5150 then the vbi line count could be lowered
- to 17 lines/field again, although I couldn't find a register
- which could do that cropping */
+ /*
+ * this is for capturing 36 raw vbi lines
+ * if there's a way to cut off the beginning 2 vbi lines
+ * with the tvp5150 then the vbi line count could be lowered
+ * to 17 lines/field again, although I couldn't find a register
+ * which could do that cropping
+ */
+
if (fmt->sample_format == V4L2_PIX_FMT_GREY)
tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
if (fmt->count[0] == 18 && fmt->count[1] == 18) {
--
2.15.0

2018-04-02 20:02:05

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH 1/3] media: i2c: tvp5150: Add a space after commas

This patch resolves checkpatch.pl errors:
ERROR: space required after that ',' (ctx:VxV)

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 134 ++++++++++++++++++++++----------------------
1 file changed, 67 insertions(+), 67 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 2476d812f669..af56a5a6db65 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -319,136 +319,136 @@ struct i2c_reg_value {
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0x00 */
- TVP5150_VD_IN_SRC_SEL_1,0x00
+ TVP5150_VD_IN_SRC_SEL_1, 0x00
},
{ /* 0x01 */
- TVP5150_ANAL_CHL_CTL,0x15
+ TVP5150_ANAL_CHL_CTL, 0x15
},
{ /* 0x02 */
- TVP5150_OP_MODE_CTL,0x00
+ TVP5150_OP_MODE_CTL, 0x00
},
{ /* 0x03 */
- TVP5150_MISC_CTL,0x01
+ TVP5150_MISC_CTL, 0x01
},
{ /* 0x06 */
- TVP5150_COLOR_KIL_THSH_CTL,0x10
+ TVP5150_COLOR_KIL_THSH_CTL, 0x10
},
{ /* 0x07 */
- TVP5150_LUMA_PROC_CTL_1,0x60
+ TVP5150_LUMA_PROC_CTL_1, 0x60
},
{ /* 0x08 */
- TVP5150_LUMA_PROC_CTL_2,0x00
+ TVP5150_LUMA_PROC_CTL_2, 0x00
},
{ /* 0x09 */
- TVP5150_BRIGHT_CTL,0x80
+ TVP5150_BRIGHT_CTL, 0x80
},
{ /* 0x0a */
- TVP5150_SATURATION_CTL,0x80
+ TVP5150_SATURATION_CTL, 0x80
},
{ /* 0x0b */
- TVP5150_HUE_CTL,0x00
+ TVP5150_HUE_CTL, 0x00
},
{ /* 0x0c */
- TVP5150_CONTRAST_CTL,0x80
+ TVP5150_CONTRAST_CTL, 0x80
},
{ /* 0x0d */
- TVP5150_DATA_RATE_SEL,0x47
+ TVP5150_DATA_RATE_SEL, 0x47
},
{ /* 0x0e */
- TVP5150_LUMA_PROC_CTL_3,0x00
+ TVP5150_LUMA_PROC_CTL_3, 0x00
},
{ /* 0x0f */
- TVP5150_CONF_SHARED_PIN,0x08
+ TVP5150_CONF_SHARED_PIN, 0x08
},
{ /* 0x11 */
- TVP5150_ACT_VD_CROP_ST_MSB,0x00
+ TVP5150_ACT_VD_CROP_ST_MSB, 0x00
},
{ /* 0x12 */
- TVP5150_ACT_VD_CROP_ST_LSB,0x00
+ TVP5150_ACT_VD_CROP_ST_LSB, 0x00
},
{ /* 0x13 */
- TVP5150_ACT_VD_CROP_STP_MSB,0x00
+ TVP5150_ACT_VD_CROP_STP_MSB, 0x00
},
{ /* 0x14 */
- TVP5150_ACT_VD_CROP_STP_LSB,0x00
+ TVP5150_ACT_VD_CROP_STP_LSB, 0x00
},
{ /* 0x15 */
- TVP5150_GENLOCK,0x01
+ TVP5150_GENLOCK, 0x01
},
{ /* 0x16 */
- TVP5150_HORIZ_SYNC_START,0x80
+ TVP5150_HORIZ_SYNC_START, 0x80
},
{ /* 0x18 */
- TVP5150_VERT_BLANKING_START,0x00
+ TVP5150_VERT_BLANKING_START, 0x00
},
{ /* 0x19 */
- TVP5150_VERT_BLANKING_STOP,0x00
+ TVP5150_VERT_BLANKING_STOP, 0x00
},
{ /* 0x1a */
- TVP5150_CHROMA_PROC_CTL_1,0x0c
+ TVP5150_CHROMA_PROC_CTL_1, 0x0c
},
{ /* 0x1b */
- TVP5150_CHROMA_PROC_CTL_2,0x14
+ TVP5150_CHROMA_PROC_CTL_2, 0x14
},
{ /* 0x1c */
- TVP5150_INT_RESET_REG_B,0x00
+ TVP5150_INT_RESET_REG_B, 0x00
},
{ /* 0x1d */
- TVP5150_INT_ENABLE_REG_B,0x00
+ TVP5150_INT_ENABLE_REG_B, 0x00
},
{ /* 0x1e */
- TVP5150_INTT_CONFIG_REG_B,0x00
+ TVP5150_INTT_CONFIG_REG_B, 0x00
},
{ /* 0x28 */
- TVP5150_VIDEO_STD,0x00
+ TVP5150_VIDEO_STD, 0x00
},
{ /* 0x2e */
- TVP5150_MACROVISION_ON_CTR,0x0f
+ TVP5150_MACROVISION_ON_CTR, 0x0f
},
{ /* 0x2f */
- TVP5150_MACROVISION_OFF_CTR,0x01
+ TVP5150_MACROVISION_OFF_CTR, 0x01
},
{ /* 0xbb */
- TVP5150_TELETEXT_FIL_ENA,0x00
+ TVP5150_TELETEXT_FIL_ENA, 0x00
},
{ /* 0xc0 */
- TVP5150_INT_STATUS_REG_A,0x00
+ TVP5150_INT_STATUS_REG_A, 0x00
},
{ /* 0xc1 */
- TVP5150_INT_ENABLE_REG_A,0x00
+ TVP5150_INT_ENABLE_REG_A, 0x00
},
{ /* 0xc2 */
- TVP5150_INT_CONF,0x04
+ TVP5150_INT_CONF, 0x04
},
{ /* 0xc8 */
- TVP5150_FIFO_INT_THRESHOLD,0x80
+ TVP5150_FIFO_INT_THRESHOLD, 0x80
},
{ /* 0xc9 */
- TVP5150_FIFO_RESET,0x00
+ TVP5150_FIFO_RESET, 0x00
},
{ /* 0xca */
- TVP5150_LINE_NUMBER_INT,0x00
+ TVP5150_LINE_NUMBER_INT, 0x00
},
{ /* 0xcb */
- TVP5150_PIX_ALIGN_REG_LOW,0x4e
+ TVP5150_PIX_ALIGN_REG_LOW, 0x4e
},
{ /* 0xcc */
- TVP5150_PIX_ALIGN_REG_HIGH,0x00
+ TVP5150_PIX_ALIGN_REG_HIGH, 0x00
},
{ /* 0xcd */
- TVP5150_FIFO_OUT_CTRL,0x01
+ TVP5150_FIFO_OUT_CTRL, 0x01
},
{ /* 0xcf */
- TVP5150_FULL_FIELD_ENA,0x00
+ TVP5150_FULL_FIELD_ENA, 0x00
},
{ /* 0xd0 */
- TVP5150_LINE_MODE_INI,0x00
+ TVP5150_LINE_MODE_INI, 0x00
},
{ /* 0xfc */
- TVP5150_FULL_FIELD_MODE_REG,0x7f
+ TVP5150_FULL_FIELD_MODE_REG, 0x7f
},
{ /* end of data */
- 0xff,0xff
+ 0xff, 0xff
}
};

@@ -456,27 +456,27 @@ static const struct i2c_reg_value tvp5150_init_default[] = {
static const struct i2c_reg_value tvp5150_init_enable[] = {
{
TVP5150_CONF_SHARED_PIN, 2
- },{ /* Automatic offset and AGC enabled */
+ }, { /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
- },{ /* Activate YCrCb output 0x9 or 0xd ? */
+ }, { /* Activate YCrCb output 0x9 or 0xd ? */
TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
TVP5150_MISC_CTL_INTREQ_OE |
TVP5150_MISC_CTL_YCBCR_OE |
TVP5150_MISC_CTL_SYNC_OE |
TVP5150_MISC_CTL_VBLANK |
TVP5150_MISC_CTL_CLOCK_OE,
- },{ /* Activates video std autodetection for all standards */
+ }, { /* Activates video std autodetection for all standards */
TVP5150_AUTOSW_MSK, 0x0
- },{ /* Default format: 0x47. For 4:2:2: 0x40 */
+ }, { /* Default format: 0x47. For 4:2:2: 0x40 */
TVP5150_DATA_RATE_SEL, 0x47
- },{
+ }, {
TVP5150_CHROMA_PROC_CTL_1, 0x0c
- },{
+ }, {
TVP5150_CHROMA_PROC_CTL_2, 0x54
- },{ /* Non documented, but initialized on WinTV USB2 */
+ }, { /* Non documented, but initialized on WinTV USB2 */
0x27, 0x20
- },{
- 0xff,0xff
+ }, {
+ 0xff, 0xff
}
};

@@ -506,72 +506,72 @@ static struct i2c_vbi_ram_value vbi_ram_default[] =
yet supported are placed under #if 0 */
#if 0
[0] = {0x010, /* Teletext, SECAM, WST System A */
- {V4L2_SLICED_TELETEXT_SECAM,6,23,1},
+ {V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#endif
[1] = {0x030, /* Teletext, PAL, WST System B */
- {V4L2_SLICED_TELETEXT_B,6,22,1},
+ {V4L2_SLICED_TELETEXT_B, 6, 22, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#if 0
[2] = {0x050, /* Teletext, PAL, WST System C */
- {V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
+ {V4L2_SLICED_TELETEXT_PAL_C, 6, 22, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
[3] = {0x070, /* Teletext, NTSC, WST System B */
- {V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
+ {V4L2_SLICED_TELETEXT_NTSC_B, 10, 21, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
[4] = {0x090, /* Tetetext, NTSC NABTS System C */
- {V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
+ {V4L2_SLICED_TELETEXT_NTSC_C, 10, 21, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
},
[5] = {0x0b0, /* Teletext, NTSC-J, NABTS System D */
- {V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
+ {V4L2_SLICED_TELETEXT_NTSC_D, 10, 21, 1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
[6] = {0x0d0, /* Closed Caption, PAL/SECAM */
- {V4L2_SLICED_CAPTION_625,22,22,1},
+ {V4L2_SLICED_CAPTION_625, 22, 22, 1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
#endif
[7] = {0x0f0, /* Closed Caption, NTSC */
- {V4L2_SLICED_CAPTION_525,21,21,1},
+ {V4L2_SLICED_CAPTION_525, 21, 21, 1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
[8] = {0x110, /* Wide Screen Signal, PAL/SECAM */
- {V4L2_SLICED_WSS_625,23,23,1},
+ {V4L2_SLICED_WSS_625, 23, 23, 1},
{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
},
#if 0
[9] = {0x130, /* Wide Screen Signal, NTSC C */
- {V4L2_SLICED_WSS_525,20,20,1},
+ {V4L2_SLICED_WSS_525, 20, 20, 1},
{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
},
[10] = {0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
- {V4l2_SLICED_VITC_625,6,22,0},
+ {V4l2_SLICED_VITC_625, 6, 22, 0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
[11] = {0x170, /* Vertical Interval Timecode (VITC), NTSC */
- {V4l2_SLICED_VITC_525,10,20,0},
+ {V4l2_SLICED_VITC_525, 10, 20, 0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
#endif
[12] = {0x190, /* Video Program System (VPS), PAL */
- {V4L2_SLICED_VPS,16,16,0},
+ {V4L2_SLICED_VPS, 16, 16, 0},
{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
},
@@ -655,7 +655,7 @@ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
* MSB = field2
*/
static int tvp5150_set_vbi(struct v4l2_subdev *sd,
- unsigned int type,u8 flags, int line,
+ unsigned int type, u8 flags, int line,
const int fields)
{
struct tvp5150 *decoder = to_tvp5150(sd);
--
2.15.0

2018-04-02 20:03:12

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH 3/3] media: i2c: tvp5150: Use parentheses for sizeof

This patch resolves a checkpatch.pl warning

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index d561d87d219a..d528fddbea16 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -625,7 +625,7 @@ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
int line, i;

dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
- memset(cap, 0, sizeof *cap);
+ memset(cap, 0, sizeof(*cap));

for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];
--
2.15.0

2018-04-02 20:43:55

by Gustavo A. R. Silva

[permalink] [raw]

Subject: Re: [PATCH 3/3] media: i2c: tvp5150: Use parentheses for sizeof

Hi,

On 04/02/2018 02:59 PM, Nasser Afshin wrote:
> This patch resolves a checkpatch.pl warning

It would be nice if you explicitly mention the warning.

Thanks.
--
Gustavo

> Signed-off-by: Nasser Afshin <[email protected]>
> ---
> drivers/media/i2c/tvp5150.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index d561d87d219a..d528fddbea16 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -625,7 +625,7 @@ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
> int line, i;
>
> dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
> - memset(cap, 0, sizeof *cap);
> + memset(cap, 0, sizeof(*cap));
>
> for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
> const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];

2018-04-02 22:25:51

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH v2 0/4] media: i2c: tvp5150: resolve checkpatch errors

This patch series tries to resolve some checkpatch.pl errors and warnings.

Nasser Afshin (4):
media: i2c: tvp5150: Add a space after commas
media: i2c: tvp5150: Use the correct comment style
media: i2c: tvp5150: Fix open brace placement codding style
media: i2c: tvp5150: Use parentheses for sizeof

Changes in v2:
- Explicitly mention the warning/error
- Separate open brace placement style error from comment style warning.

drivers/media/i2c/tvp5150.c | 159 +++++++++++++++++++++++---------------------
1 file changed, 82 insertions(+), 77 deletions(-)

--
2.15.0

2018-04-02 22:26:36

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH v2 2/4] media: i2c: tvp5150: Use the correct comment style

This patch resolves checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index af56a5a6db65..fd23138cc6a3 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -502,8 +502,10 @@ struct i2c_vbi_ram_value {

static struct i2c_vbi_ram_value vbi_ram_default[] =
{
- /* FIXME: Current api doesn't handle all VBI types, those not
- yet supported are placed under #if 0 */
+ /*
+ * FIXME: Current api doesn't handle all VBI types, those not
+ * yet supported are placed under #if 0
+ */
#if 0
[0] = {0x010, /* Teletext, SECAM, WST System A */
{V4L2_SLICED_TELETEXT_SECAM, 6, 23, 1},
@@ -1101,11 +1103,14 @@ static int tvp5150_s_routing(struct v4l2_subdev *sd,

static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
{
- /* this is for capturing 36 raw vbi lines
- if there's a way to cut off the beginning 2 vbi lines
- with the tvp5150 then the vbi line count could be lowered
- to 17 lines/field again, although I couldn't find a register
- which could do that cropping */
+ /*
+ * this is for capturing 36 raw vbi lines
+ * if there's a way to cut off the beginning 2 vbi lines
+ * with the tvp5150 then the vbi line count could be lowered
+ * to 17 lines/field again, although I couldn't find a register
+ * which could do that cropping
+ */
+
if (fmt->sample_format == V4L2_PIX_FMT_GREY)
tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
if (fmt->count[0] == 18 && fmt->count[1] == 18) {
--
2.15.0

2018-04-02 22:26:36

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH v2 1/4] media: i2c: tvp5150: Add a space after commas

2018-04-02 22:26:44

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH v2 4/4] media: i2c: tvp5150: Use parentheses for sizeof

This patch resolves a checkpatch.pl warning:
WARNING: sizeof *cap should be sizeof(*cap)

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index d561d87d219a..d528fddbea16 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -625,7 +625,7 @@ static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
int line, i;

dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
- memset(cap, 0, sizeof *cap);
+ memset(cap, 0, sizeof(*cap));

for (i = 0; i < ARRAY_SIZE(vbi_ram_default); i++) {
const struct i2c_vbi_ram_value *regs = &vbi_ram_default[i];
--
2.15.0

2018-04-02 22:26:55

by Nasser Afshin

[permalink] [raw]

Subject: [PATCH v2 3/4] media: i2c: tvp5150: Fix open brace placement codding style

This patch resolves the following checkpatch.pl error:
ERROR: that open brace { should be on the previous line

Signed-off-by: Nasser Afshin <[email protected]>
---
drivers/media/i2c/tvp5150.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index fd23138cc6a3..d561d87d219a 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -500,8 +500,8 @@ struct i2c_vbi_ram_value {
* and so on. There are 16 possible locations from 0 to 15.
*/

-static struct i2c_vbi_ram_value vbi_ram_default[] =
-{
+static struct i2c_vbi_ram_value vbi_ram_default[] = {
+
/*
* FIXME: Current api doesn't handle all VBI types, those not
* yet supported are placed under #if 0
--
2.15.0