Hello.
As far as I can tell, the c2k platform is abandoned so it should be
removed. Once it is removed, there are no more platforms that use
the mv64x60 hostbridge so remove that code too (and related drivers).
If and when this series of patches is accepted, I will submit patches
to the appropriate maintainers to remote drivers/tty/serial/mpsc.c and
drivers/watchdog/mv64x60_wdt.c. The i2c and ethernet drivers are used
by ARM SoCs/platforms so they will be left alone.
Based on git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux,
'merge' branch which is currently 6c5c24035003 (Automatic merge of
branches 'master', 'next' and 'fixes' into merge)
Thanks,
Mark
--
Mark Greer (5):
powerpc/embedded6xx: Remove C2K board support
powerpc/boot: Remove support for Marvell MPSC serial controller
powerpc/boot: Remove support for Marvell mv64x60 i2c controller
powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
powerpc: Remove core support for Marvell mv64x60 hostbridges
Documentation/devicetree/bindings/marvell.txt | 516 -----------------------
arch/powerpc/boot/Makefile | 7 +-
arch/powerpc/boot/cuboot-c2k.c | 189 ---------
arch/powerpc/boot/dts/c2k.dts | 366 ----------------
arch/powerpc/boot/mpsc.c | 169 --------
arch/powerpc/boot/mv64x60.c | 581 --------------------------
arch/powerpc/boot/mv64x60.h | 70 ----
arch/powerpc/boot/mv64x60_i2c.c | 204 ---------
arch/powerpc/boot/ops.h | 1 -
arch/powerpc/boot/serial.c | 4 -
arch/powerpc/configs/c2k_defconfig | 390 -----------------
arch/powerpc/platforms/embedded6xx/Kconfig | 10 -
arch/powerpc/platforms/embedded6xx/Makefile | 1 -
arch/powerpc/platforms/embedded6xx/c2k.c | 148 -------
arch/powerpc/sysdev/Makefile | 3 -
arch/powerpc/sysdev/mv64x60.h | 13 -
arch/powerpc/sysdev/mv64x60_dev.c | 535 ------------------------
arch/powerpc/sysdev/mv64x60_pci.c | 171 --------
arch/powerpc/sysdev/mv64x60_pic.c | 297 -------------
arch/powerpc/sysdev/mv64x60_udbg.c | 152 -------
20 files changed, 3 insertions(+), 3824 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/marvell.txt
delete mode 100644 arch/powerpc/boot/cuboot-c2k.c
delete mode 100644 arch/powerpc/boot/dts/c2k.dts
delete mode 100644 arch/powerpc/boot/mpsc.c
delete mode 100644 arch/powerpc/boot/mv64x60.c
delete mode 100644 arch/powerpc/boot/mv64x60.h
delete mode 100644 arch/powerpc/boot/mv64x60_i2c.c
delete mode 100644 arch/powerpc/configs/c2k_defconfig
delete mode 100644 arch/powerpc/platforms/embedded6xx/c2k.c
delete mode 100644 arch/powerpc/sysdev/mv64x60.h
delete mode 100644 arch/powerpc/sysdev/mv64x60_dev.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pci.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pic.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_udbg.c
--
2.16.2
There are no longer any platforms that use Marvell's mv64x60's i2c
controller so remove its driver.
Signed-off-by: Mark Greer <[email protected]>
---
arch/powerpc/boot/Makefile | 2 +-
arch/powerpc/boot/mv64x60_i2c.c | 204 ----------------------------------------
2 files changed, 1 insertion(+), 205 deletions(-)
delete mode 100644 arch/powerpc/boot/mv64x60_i2c.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 58f2dbfba275..bf6a46055ba7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -120,7 +120,7 @@ src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c ugecon.c fsl-soc.c
src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
src-wlib-$(CONFIG_CPM) += cpm-serial.c
diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c
deleted file mode 100644
index 52a3212b6638..000000000000
--- a/arch/powerpc/boot/mv64x60_i2c.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * Bootloader version of the i2c driver for the MV64x60.
- *
- * Author: Dale Farnsworth <[email protected]>
- * Maintained by: Mark A. Greer <[email protected]>
- *
- * 2003, 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "mv64x60.h"
-
-/* Register defines */
-#define MV64x60_I2C_REG_SLAVE_ADDR 0x00
-#define MV64x60_I2C_REG_DATA 0x04
-#define MV64x60_I2C_REG_CONTROL 0x08
-#define MV64x60_I2C_REG_STATUS 0x0c
-#define MV64x60_I2C_REG_BAUD 0x0c
-#define MV64x60_I2C_REG_EXT_SLAVE_ADDR 0x10
-#define MV64x60_I2C_REG_SOFT_RESET 0x1c
-
-#define MV64x60_I2C_CONTROL_ACK 0x04
-#define MV64x60_I2C_CONTROL_IFLG 0x08
-#define MV64x60_I2C_CONTROL_STOP 0x10
-#define MV64x60_I2C_CONTROL_START 0x20
-#define MV64x60_I2C_CONTROL_TWSIEN 0x40
-#define MV64x60_I2C_CONTROL_INTEN 0x80
-
-#define MV64x60_I2C_STATUS_BUS_ERR 0x00
-#define MV64x60_I2C_STATUS_MAST_START 0x08
-#define MV64x60_I2C_STATUS_MAST_REPEAT_START 0x10
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK 0x18
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20
-#define MV64x60_I2C_STATUS_MAST_WR_ACK 0x28
-#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK 0x30
-#define MV64x60_I2C_STATUS_MAST_LOST_ARB 0x38
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK 0x40
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48
-#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK 0x50
-#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8
-#define MV64x60_I2C_STATUS_NO_STATUS 0xf8
-
-static u8 *ctlr_base;
-
-static int mv64x60_i2c_wait_for_status(int wanted)
-{
- int i;
- int status;
-
- for (i=0; i<1000; i++) {
- udelay(10);
- status = in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_STATUS))
- & 0xff;
- if (status == wanted)
- return status;
- }
- return -status;
-}
-
-static int mv64x60_i2c_control(int control, int status)
-{
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
- return mv64x60_i2c_wait_for_status(status);
-}
-
-static int mv64x60_i2c_read_byte(int control, int status)
-{
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
- if (mv64x60_i2c_wait_for_status(status) < 0)
- return -1;
- return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff;
-}
-
-static int mv64x60_i2c_write_byte(int data, int control, int status)
-{
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff);
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
- return mv64x60_i2c_wait_for_status(status);
-}
-
-int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
- u32 count)
-{
- int i;
- int data;
- int control;
- int status;
-
- if (ctlr_base == NULL)
- return -1;
-
- /* send reset */
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0);
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0);
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0);
- out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) | 0x4);
-
- if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN,
- MV64x60_I2C_STATUS_NO_STATUS) < 0)
- return -1;
-
- /* send start */
- control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_START;
- if (mv64x60_i2c_control(control, status) < 0)
- return -1;
-
- /* select device for writing */
- data = devaddr & ~0x1;
- control = MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK;
- if (mv64x60_i2c_write_byte(data, control, status) < 0)
- return -1;
-
- /* send offset of data */
- control = MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_WR_ACK;
- if (offset_size > 1) {
- if (mv64x60_i2c_write_byte(offset >> 8, control, status) < 0)
- return -1;
- }
- if (mv64x60_i2c_write_byte(offset, control, status) < 0)
- return -1;
-
- /* resend start */
- control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_REPEAT_START;
- if (mv64x60_i2c_control(control, status) < 0)
- return -1;
-
- /* select device for reading */
- data = devaddr | 0x1;
- control = MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK;
- if (mv64x60_i2c_write_byte(data, control, status) < 0)
- return -1;
-
- /* read all but last byte of data */
- control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK;
-
- for (i=1; i<count; i++) {
- data = mv64x60_i2c_read_byte(control, status);
- if (data < 0) {
- printf("errors on iteration %d\n", i);
- return -1;
- }
- *buf++ = data;
- }
-
- /* read last byte of data */
- control = MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK;
- data = mv64x60_i2c_read_byte(control, status);
- if (data < 0)
- return -1;
- *buf++ = data;
-
- /* send stop */
- control = MV64x60_I2C_CONTROL_STOP | MV64x60_I2C_CONTROL_TWSIEN;
- status = MV64x60_I2C_STATUS_NO_STATUS;
- if (mv64x60_i2c_control(control, status) < 0)
- return -1;
-
- return count;
-}
-
-int mv64x60_i2c_open(void)
-{
- u32 v;
- void *devp;
-
- devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
- if (devp == NULL)
- goto err_out;
- if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
- goto err_out;
-
- ctlr_base = (u8 *)v;
- return 0;
-
-err_out:
- return -1;
-}
-
-void mv64x60_i2c_close(void)
-{
- ctlr_base = NULL;
-}
--
2.16.2
There are no longer any platforms that use Marvell's MPSC serial
controller so remove its driver.
Signed-off-by: Mark Greer <[email protected]>
---
arch/powerpc/boot/Makefile | 2 +-
arch/powerpc/boot/mpsc.c | 169 ---------------------------------------------
arch/powerpc/boot/ops.h | 1 -
arch/powerpc/boot/serial.c | 4 --
4 files changed, 1 insertion(+), 175 deletions(-)
delete mode 100644 arch/powerpc/boot/mpsc.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 70bf9b409fae..58f2dbfba275 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -120,7 +120,7 @@ src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mpsc.c mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
src-wlib-$(CONFIG_CPM) += cpm-serial.c
diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c
deleted file mode 100644
index 425ad88cce8d..000000000000
--- a/arch/powerpc/boot/mpsc.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * MPSC/UART driver for the Marvell mv64360, mv64460, ...
- *
- * Author: Mark A. Greer <[email protected]>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-
-
-#define MPSC_CHR_1 0x000c
-
-#define MPSC_CHR_2 0x0010
-#define MPSC_CHR_2_TA (1<<7)
-#define MPSC_CHR_2_TCS (1<<9)
-#define MPSC_CHR_2_RA (1<<23)
-#define MPSC_CHR_2_CRD (1<<25)
-#define MPSC_CHR_2_EH (1<<31)
-
-#define MPSC_CHR_4 0x0018
-#define MPSC_CHR_4_Z (1<<29)
-
-#define MPSC_CHR_5 0x001c
-#define MPSC_CHR_5_CTL1_INTR (1<<12)
-#define MPSC_CHR_5_CTL1_VALID (1<<15)
-
-#define MPSC_CHR_10 0x0030
-
-#define MPSC_INTR_CAUSE 0x0000
-#define MPSC_INTR_CAUSE_RCC (1<<6)
-#define MPSC_INTR_MASK 0x0080
-
-#define SDMA_SDCM 0x0008
-#define SDMA_SDCM_AR (1<<15)
-#define SDMA_SDCM_AT (1<<31)
-
-static volatile char *mpsc_base;
-static volatile char *mpscintr_base;
-static u32 chr1, chr2;
-
-static int mpsc_open(void)
-{
- chr1 = in_le32((u32 *)(mpsc_base + MPSC_CHR_1)) & 0x00ff0000;
- chr2 = in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & ~(MPSC_CHR_2_TA
- | MPSC_CHR_2_TCS | MPSC_CHR_2_RA | MPSC_CHR_2_CRD
- | MPSC_CHR_2_EH);
- out_le32((u32 *)(mpsc_base + MPSC_CHR_4), MPSC_CHR_4_Z);
- out_le32((u32 *)(mpsc_base + MPSC_CHR_5),
- MPSC_CHR_5_CTL1_INTR | MPSC_CHR_5_CTL1_VALID);
- out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_EH);
- return 0;
-}
-
-static void mpsc_putc(unsigned char c)
-{
- while (in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & MPSC_CHR_2_TCS);
-
- out_le32((u32 *)(mpsc_base + MPSC_CHR_1), chr1 | c);
- out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_TCS);
-}
-
-static unsigned char mpsc_getc(void)
-{
- u32 cause = 0;
- unsigned char c;
-
- while (!(cause & MPSC_INTR_CAUSE_RCC))
- cause = in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE));
-
- c = in_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2));
- out_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2), c);
- out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE),
- cause & ~MPSC_INTR_CAUSE_RCC);
-
- return c;
-}
-
-static u8 mpsc_tstc(void)
-{
- return (u8)((in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE))
- & MPSC_INTR_CAUSE_RCC) != 0);
-}
-
-static void mpsc_stop_dma(volatile char *sdma_base)
-{
- out_le32((u32 *)(mpsc_base + MPSC_CHR_2),MPSC_CHR_2_TA | MPSC_CHR_2_RA);
- out_le32((u32 *)(sdma_base + SDMA_SDCM), SDMA_SDCM_AR | SDMA_SDCM_AT);
-
- while ((in_le32((u32 *)(sdma_base + SDMA_SDCM))
- & (SDMA_SDCM_AR | SDMA_SDCM_AT)) != 0)
- udelay(100);
-}
-
-static volatile char *mpsc_get_virtreg_of_phandle(void *devp, char *prop)
-{
- void *v;
- int n;
-
- n = getprop(devp, prop, &v, sizeof(v));
- if (n != sizeof(v))
- goto err_out;
-
- devp = find_node_by_linuxphandle((u32)v);
- if (devp == NULL)
- goto err_out;
-
- n = getprop(devp, "virtual-reg", &v, sizeof(v));
- if (n == sizeof(v))
- return v;
-
-err_out:
- return NULL;
-}
-
-int mpsc_console_init(void *devp, struct serial_console_data *scdp)
-{
- void *v;
- int n, reg_set;
- volatile char *sdma_base;
-
- n = getprop(devp, "virtual-reg", &v, sizeof(v));
- if (n != sizeof(v))
- goto err_out;
- mpsc_base = v;
-
- sdma_base = mpsc_get_virtreg_of_phandle(devp, "sdma");
- if (sdma_base == NULL)
- goto err_out;
-
- mpscintr_base = mpsc_get_virtreg_of_phandle(devp, "mpscintr");
- if (mpscintr_base == NULL)
- goto err_out;
-
- n = getprop(devp, "cell-index", &v, sizeof(v));
- if (n != sizeof(v))
- goto err_out;
- reg_set = (int)v;
-
- mpscintr_base += (reg_set == 0) ? 0x4 : 0xc;
-
- /* Make sure the mpsc ctlrs are shutdown */
- out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
- out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
- out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
- out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
-
- mpsc_stop_dma(sdma_base);
-
- scdp->open = mpsc_open;
- scdp->putc = mpsc_putc;
- scdp->getc = mpsc_getc;
- scdp->tstc = mpsc_tstc;
- scdp->close = NULL;
-
- return 0;
-
-err_out:
- return -1;
-}
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index fad1862f4b2d..cd043726ed88 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -86,7 +86,6 @@ void start(void);
void fdt_init(void *blob);
int serial_console_init(void);
int ns16550_console_init(void *devp, struct serial_console_data *scdp);
-int mpsc_console_init(void *devp, struct serial_console_data *scdp);
int cpm_console_init(void *devp, struct serial_console_data *scdp);
int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp);
int uartlite_console_init(void *devp, struct serial_console_data *scdp);
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 88955095ec07..48e3743faedf 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -120,10 +120,6 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550") ||
dt_is_compatible(devp, "pnpPNP,501"))
rc = ns16550_console_init(devp, &serial_cd);
-#ifdef CONFIG_EMBEDDED6xx
- else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
- rc = mpsc_console_init(devp, &serial_cd);
-#endif
#ifdef CONFIG_CPM
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
--
2.16.2
There are no longer any platforms that use Marvell's mv64x60
hostbridges so remove the supporting kernel code.
CC: Dale Farnsworth <[email protected]>
Signed-off-by: Mark Greer <[email protected]>
---
Documentation/devicetree/bindings/marvell.txt | 516 -------------------------
arch/powerpc/sysdev/Makefile | 3 -
arch/powerpc/sysdev/mv64x60.h | 13 -
arch/powerpc/sysdev/mv64x60_dev.c | 535 --------------------------
arch/powerpc/sysdev/mv64x60_pci.c | 171 --------
arch/powerpc/sysdev/mv64x60_pic.c | 297 --------------
arch/powerpc/sysdev/mv64x60_udbg.c | 152 --------
7 files changed, 1687 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/marvell.txt
delete mode 100644 arch/powerpc/sysdev/mv64x60.h
delete mode 100644 arch/powerpc/sysdev/mv64x60_dev.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pci.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_pic.c
delete mode 100644 arch/powerpc/sysdev/mv64x60_udbg.c
diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt
deleted file mode 100644
index 7f722316458a..000000000000
--- a/Documentation/devicetree/bindings/marvell.txt
+++ /dev/null
@@ -1,516 +0,0 @@
-Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system. In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains. Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
- This node is used to represent the system-controller and must be
- present when the system uses a system controller chip. The top-level
- system-controller node contains information that is global to all
- devices within the system controller chip. The node name begins
- with "system-controller" followed by the unit address, which is
- the base address of the memory-mapped register set for the system
- controller chip.
-
- Required properties:
-
- - ranges : Describes the translation of system controller addresses
- for memory mapped registers.
- - clock-frequency: Contains the main clock frequency for the system
- controller chip.
- - reg : This property defines the address and size of the
- memory-mapped registers contained within the system controller
- chip. The address specified in the "reg" property should match
- the unit address of the system-controller node.
- - #address-cells : Address representation for system controller
- devices. This field represents the number of cells needed to
- represent the address of the memory-mapped registers of devices
- within the system controller chip.
- - #size-cells : Size representation for the memory-mapped
- registers within the system controller chip.
- - #interrupt-cells : Defines the width of cells used to represent
- interrupts.
-
- Optional properties:
-
- - model : The specific model of the system controller chip. Such
- as, "mv64360", "mv64460", or "mv64560".
- - compatible : A string identifying the compatibility identifiers
- of the system controller chip.
-
- The system-controller node contains child nodes for each system
- controller device that the platform uses. Nodes should not be created
- for devices which exist on the system controller chip but are not used
-
- Example Marvell Discovery mv64360 system-controller node:
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- [ child node definitions... ]
- }
-
-2) Child nodes of /system-controller
-
- a) Marvell Discovery MDIO bus
-
- The MDIO is a bus to which the PHY devices are connected. For each
- device that exists on this bus, a child node should be created. See
- the definition of the PHY node below for an example of how to define
- a PHY.
-
- Required properties:
- - #address-cells : Should be <1>
- - #size-cells : Should be <0>
- - compatible : Should be "marvell,mv64360-mdio"
-
- Example:
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
-
- ethernet-phy@0 {
- ......
- };
- };
-
-
- b) Marvell Discovery ethernet controller
-
- The Discover ethernet controller is described with two levels
- of nodes. The first level describes an ethernet silicon block
- and the second level describes up to 3 ethernet nodes within
- that block. The reason for the multiple levels is that the
- registers for the node are interleaved within a single set
- of registers. The "ethernet-block" level describes the
- shared register set, and the "ethernet" nodes describe ethernet
- port-specific properties.
-
- Ethernet block node
-
- Required properties:
- - #address-cells : <1>
- - #size-cells : <0>
- - compatible : "marvell,mv64360-eth-block"
- - reg : Offset and length of the register set for this block
-
- Optional properties:
- - clocks : Phandle to the clock control device and gate bit
-
- Example Discovery Ethernet block node:
- ethernet-block@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-block";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- .......
- };
- };
-
- Ethernet port node
-
- Required properties:
- - compatible : Should be "marvell,mv64360-eth".
- - reg : Should be <0>, <1>, or <2>, according to which registers
- within the silicon block the device uses.
- - interrupts : <a> where a is the interrupt number for the port.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
- - phy : the phandle for the PHY connected to this ethernet
- controller.
- - local-mac-address : 6 bytes, MAC address
-
- Example Discovery Ethernet port node:
- ethernet@0 {
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
-
-
-
- c) Marvell Discovery PHY nodes
-
- Required properties:
- - interrupts : <a> where a is the interrupt number for this phy.
- - interrupt-parent : the phandle for the interrupt controller that
- services interrupts for this device.
- - reg : The ID number for the phy, usually a small integer
-
- Example Discovery PHY node:
- ethernet-phy@1 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
-
-
- d) Marvell Discovery SDMA nodes
-
- Represent DMA hardware associated with the MPSC (multiprotocol
- serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-sdma"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the DMA
- device.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SDMA node:
- sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
-
- e) Marvell Discovery BRG nodes
-
- Represent baud rate generator hardware associated with the MPSC
- (multiprotocol serial controllers).
-
- Required properties:
- - compatible : "marvell,mv64360-brg"
- - reg : Offset and length of the register set for this device
- - clock-src : A value from 0 to 15 which selects the clock
- source for the baud rate generator. This value corresponds
- to the CLKS value in the BRGx configuration register. See
- the mv64x60 User's Manual.
- - clock-frequence : The frequency (in Hz) of the baud rate
- generator's input clock.
- - current-speed : The current speed setting (presumably by
- firmware) of the baud rate generator.
-
- Example Discovery BRG node:
- brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
-
- f) Marvell Discovery CUNIT nodes
-
- Represent the Serial Communications Unit device hardware.
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
-
- g) Marvell Discovery MPSCROUTING nodes
-
- Represent the Discovery's MPSC routing hardware
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery CUNIT node:
- mpscrouting@b500 {
- reg = <0xb400 0xc>;
- };
-
-
- h) Marvell Discovery MPSCINTR nodes
-
- Represent the Discovery's MPSC DMA interrupt hardware registers
- (SDMA cause and mask registers).
-
- Required properties:
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPSCINTR node:
- mpsintr@b800 {
- reg = <0xb800 0x100>;
- };
-
-
- i) Marvell Discovery MPSC nodes
-
- Represent the Discovery's MPSC (Multiprotocol Serial Controller)
- serial port.
-
- Required properties:
- - compatible : "marvell,mv64360-mpsc"
- - reg : Offset and length of the register set for this device
- - sdma : the phandle for the SDMA node used by this port
- - brg : the phandle for the BRG node used by this port
- - cunit : the phandle for the CUNIT node used by this port
- - mpscrouting : the phandle for the MPSCROUTING node used by this port
- - mpscintr : the phandle for the MPSCINTR node used by this port
- - cell-index : the hardware index of this cell in the MPSC core
- - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
- register
- - interrupts : <a> where a is the interrupt number for the MPSC.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery MPSCINTR node:
- mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- max_idle = <40>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
-
- j) Marvell Discovery Watch Dog Timer nodes
-
- Represent the Discovery's watchdog timer hardware
-
- Required properties:
- - compatible : "marvell,mv64360-wdt"
- - reg : Offset and length of the register set for this device
-
- Example Discovery Watch Dog Timer node:
- wdt@b410 {
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
-
- k) Marvell Discovery I2C nodes
-
- Represent the Discovery's I2C hardware
-
- Required properties:
- - device_type : "i2c"
- - compatible : "marvell,mv64360-i2c"
- - reg : Offset and length of the register set for this device
- - interrupts : <a> where a is the interrupt number for the I2C.
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery I2C node:
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
-
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
- Represent the Discovery's PIC hardware
-
- Required properties:
- - #interrupt-cells : <1>
- - #address-cells : <0>
- - compatible : "marvell,mv64360-pic"
- - reg : Offset and length of the register set for this device
- - interrupt-controller
-
- Example Discovery PIC node:
- pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
-
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
- Represent the Discovery's MPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-mpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery MPP node:
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
-
- n) Marvell Discovery GPP (General Purpose Pins) nodes
-
- Represent the Discovery's GPP hardware
-
- Required properties:
- - compatible : "marvell,mv64360-gpp"
- - reg : Offset and length of the register set for this device
-
- Example Discovery GPP node:
- gpp@f000 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
-
- o) Marvell Discovery PCI host bridge node
-
- Represents the Discovery's PCI host bridge device. The properties
- for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
- 1275-1994. A typical value for the compatible property is
- "marvell,mv64360-pci".
-
- Example Discovery PCI host bridge node
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
-
- p) Marvell Discovery CPU Error nodes
-
- Represent the Discovery's CPU error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-cpu-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery CPU Error node:
- cpu-error@70 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
-
- q) Marvell Discovery SRAM Controller nodes
-
- Represent the Discovery's SRAM controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-sram-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery SRAM Controller node:
- sram-ctrl@380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
-
- r) Marvell Discovery PCI Error Handler nodes
-
- Represent the Discovery's PCI error handler device.
-
- Required properties:
- - compatible : "marvell,mv64360-pci-error"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery PCI Error Handler node:
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
-
- s) Marvell Discovery Memory Controller nodes
-
- Represent the Discovery's memory controller device.
-
- Required properties:
- - compatible : "marvell,mv64360-mem-ctrl"
- - reg : Offset and length of the register set for this device
- - interrupts : the interrupt number for this device
- - interrupt-parent : the phandle for the interrupt controller
- that services interrupts for this device.
-
- Example Discovery Memory Controller node:
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
-
-
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9861407d644a..ea2f595b5133 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -28,9 +28,6 @@ obj-$(CONFIG_FSL_85XX_CACHE_SRAM) += fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
obj-$(CONFIG_SIMPLE_GPIO) += simple_gpio.o
obj-$(CONFIG_FSL_RIO) += fsl_rio.o fsl_rmu.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
-mv64x60-$(CONFIG_PCI) += mv64x60_pci.o
-obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
- mv64x60_udbg.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
diff --git a/arch/powerpc/sysdev/mv64x60.h b/arch/powerpc/sysdev/mv64x60.h
deleted file mode 100644
index 60cfcb90d1fa..000000000000
--- a/arch/powerpc/sysdev/mv64x60.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MV64X60_H__
-#define __MV64X60_H__
-
-#include <linux/init.h>
-
-extern void __init mv64x60_init_irq(void);
-extern unsigned int mv64x60_get_irq(void);
-
-extern void __init mv64x60_pci_init(void);
-extern void __init mv64x60_init_early(void);
-
-#endif /* __MV64X60_H__ */
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
deleted file mode 100644
index 185a67e742a6..000000000000
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ /dev/null
@@ -1,535 +0,0 @@
-/*
- * Platform device setup for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <[email protected]>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <linux/of_platform.h>
-#include <linux/of_net.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/prom.h>
-
-/* These functions provide the necessary setup for the mv64x60 drivers. */
-
-static const struct of_device_id of_mv64x60_devices[] __initconst = {
- { .compatible = "marvell,mv64306-devctrl", },
- {}
-};
-
-/*
- * Create MPSC platform devices
- */
-static int __init mv64x60_mpsc_register_shared_pdev(struct device_node *np)
-{
- struct platform_device *pdev;
- struct resource r[2];
- struct mpsc_shared_pdata pdata;
- const phandle *ph;
- struct device_node *mpscrouting, *mpscintr;
- int err;
-
- ph = of_get_property(np, "mpscrouting", NULL);
- mpscrouting = of_find_node_by_phandle(*ph);
- if (!mpscrouting)
- return -ENODEV;
-
- err = of_address_to_resource(mpscrouting, 0, &r[0]);
- of_node_put(mpscrouting);
- if (err)
- return err;
-
- ph = of_get_property(np, "mpscintr", NULL);
- mpscintr = of_find_node_by_phandle(*ph);
- if (!mpscintr)
- return -ENODEV;
-
- err = of_address_to_resource(mpscintr, 0, &r[1]);
- of_node_put(mpscintr);
- if (err)
- return err;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdev = platform_device_alloc(MPSC_SHARED_NAME, 0);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, r, 2);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-
-static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
-{
- struct resource r[5];
- struct mpsc_pdata pdata;
- struct platform_device *pdev;
- const unsigned int *prop;
- const phandle *ph;
- struct device_node *sdma, *brg;
- int err;
- int port_number;
-
- /* only register the shared platform device the first time through */
- if (id == 0 && (err = mv64x60_mpsc_register_shared_pdev(np)))
- return err;
-
- memset(r, 0, sizeof(r));
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return err;
-
- of_irq_to_resource(np, 0, &r[4]);
-
- ph = of_get_property(np, "sdma", NULL);
- sdma = of_find_node_by_phandle(*ph);
- if (!sdma)
- return -ENODEV;
-
- of_irq_to_resource(sdma, 0, &r[3]);
- err = of_address_to_resource(sdma, 0, &r[1]);
- of_node_put(sdma);
- if (err)
- return err;
-
- ph = of_get_property(np, "brg", NULL);
- brg = of_find_node_by_phandle(*ph);
- if (!brg)
- return -ENODEV;
-
- err = of_address_to_resource(brg, 0, &r[2]);
- of_node_put(brg);
- if (err)
- return err;
-
- prop = of_get_property(np, "cell-index", NULL);
- if (!prop)
- return -ENODEV;
- port_number = *(int *)prop;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.cache_mgmt = 1; /* All current revs need this set */
-
- pdata.max_idle = 40; /* default */
- prop = of_get_property(np, "max_idle", NULL);
- if (prop)
- pdata.max_idle = *prop;
-
- prop = of_get_property(brg, "current-speed", NULL);
- if (prop)
- pdata.default_baud = *prop;
-
- /* Default is 8 bits, no parity, no flow control */
- pdata.default_bits = 8;
- pdata.default_parity = 'n';
- pdata.default_flow = 'n';
-
- prop = of_get_property(np, "chr_1", NULL);
- if (prop)
- pdata.chr_1_val = *prop;
-
- prop = of_get_property(np, "chr_2", NULL);
- if (prop)
- pdata.chr_2_val = *prop;
-
- prop = of_get_property(np, "chr_10", NULL);
- if (prop)
- pdata.chr_10_val = *prop;
-
- prop = of_get_property(np, "mpcr", NULL);
- if (prop)
- pdata.mpcr_val = *prop;
-
- prop = of_get_property(brg, "bcr", NULL);
- if (prop)
- pdata.bcr_val = *prop;
-
- pdata.brg_can_tune = 1; /* All current revs need this set */
-
- prop = of_get_property(brg, "clock-src", NULL);
- if (prop)
- pdata.brg_clk_src = *prop;
-
- prop = of_get_property(brg, "clock-frequency", NULL);
- if (prop)
- pdata.brg_clk_freq = *prop;
-
- pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number);
- if (!pdev)
- return -ENOMEM;
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
- err = platform_device_add_resources(pdev, r, 5);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_eth platform devices
- */
-static struct platform_device * __init mv64x60_eth_register_shared_pdev(
- struct device_node *np, int id)
-{
- struct platform_device *pdev;
- struct resource r[2];
- int err;
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return ERR_PTR(err);
-
- /* register an orion mdio bus driver */
- r[1].start = r[0].start + 0x4;
- r[1].end = r[0].start + 0x84 - 1;
- r[1].flags = IORESOURCE_MEM;
-
- if (id == 0) {
- pdev = platform_device_register_simple("orion-mdio", -1, &r[1], 1);
- if (IS_ERR(pdev))
- return pdev;
- }
-
- pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
- &r[0], 1);
-
- return pdev;
-}
-
-static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
- struct platform_device *shared_pdev)
-{
- struct resource r[1];
- struct mv643xx_eth_platform_data pdata;
- struct platform_device *pdev;
- struct device_node *phy;
- const u8 *mac_addr;
- const int *prop;
- const phandle *ph;
- int err;
-
- memset(r, 0, sizeof(r));
- of_irq_to_resource(np, 0, &r[0]);
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.shared = shared_pdev;
-
- prop = of_get_property(np, "reg", NULL);
- if (!prop)
- return -ENODEV;
- pdata.port_number = *prop;
-
- mac_addr = of_get_mac_address(np);
- if (mac_addr)
- memcpy(pdata.mac_addr, mac_addr, 6);
-
- prop = of_get_property(np, "speed", NULL);
- if (prop)
- pdata.speed = *prop;
-
- prop = of_get_property(np, "tx_queue_size", NULL);
- if (prop)
- pdata.tx_queue_size = *prop;
-
- prop = of_get_property(np, "rx_queue_size", NULL);
- if (prop)
- pdata.rx_queue_size = *prop;
-
- prop = of_get_property(np, "tx_sram_addr", NULL);
- if (prop)
- pdata.tx_sram_addr = *prop;
-
- prop = of_get_property(np, "tx_sram_size", NULL);
- if (prop)
- pdata.tx_sram_size = *prop;
-
- prop = of_get_property(np, "rx_sram_addr", NULL);
- if (prop)
- pdata.rx_sram_addr = *prop;
-
- prop = of_get_property(np, "rx_sram_size", NULL);
- if (prop)
- pdata.rx_sram_size = *prop;
-
- ph = of_get_property(np, "phy", NULL);
- if (!ph)
- return -ENODEV;
-
- phy = of_find_node_by_phandle(*ph);
- if (phy == NULL)
- return -ENODEV;
-
- prop = of_get_property(phy, "reg", NULL);
- if (prop)
- pdata.phy_addr = MV643XX_ETH_PHY_ADDR(*prop);
-
- of_node_put(phy);
-
- pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- err = platform_device_add_resources(pdev, r, 1);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_i2c platform devices
- */
-static int __init mv64x60_i2c_device_setup(struct device_node *np, int id)
-{
- struct resource r[2];
- struct platform_device *pdev;
- struct mv64xxx_i2c_pdata pdata;
- const unsigned int *prop;
- int err;
-
- memset(r, 0, sizeof(r));
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- return err;
-
- of_irq_to_resource(np, 0, &r[1]);
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.freq_m = 8; /* default */
- prop = of_get_property(np, "freq_m", NULL);
- if (prop)
- pdata.freq_m = *prop;
-
- pdata.freq_n = 3; /* default */
- prop = of_get_property(np, "freq_n", NULL);
- if (prop)
- pdata.freq_n = *prop;
-
- pdata.timeout = 1000; /* default: 1 second */
-
- pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, r, 2);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-/*
- * Create mv64x60_wdt platform devices
- */
-static int __init mv64x60_wdt_device_setup(struct device_node *np, int id)
-{
- struct resource r;
- struct platform_device *pdev;
- struct mv64x60_wdt_pdata pdata;
- const unsigned int *prop;
- int err;
-
- err = of_address_to_resource(np, 0, &r);
- if (err)
- return err;
-
- memset(&pdata, 0, sizeof(pdata));
-
- pdata.timeout = 10; /* Default: 10 seconds */
-
- np = of_get_parent(np);
- if (!np)
- return -ENODEV;
-
- prop = of_get_property(np, "clock-frequency", NULL);
- of_node_put(np);
- if (!prop)
- return -ENODEV;
- pdata.bus_clk = *prop / 1000000; /* wdt driver wants freq in MHz */
-
- pdev = platform_device_alloc(MV64x60_WDT_NAME, id);
- if (!pdev)
- return -ENOMEM;
-
- err = platform_device_add_resources(pdev, &r, 1);
- if (err)
- goto error;
-
- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
- if (err)
- goto error;
-
- err = platform_device_add(pdev);
- if (err)
- goto error;
-
- return 0;
-
-error:
- platform_device_put(pdev);
- return err;
-}
-
-static int __init mv64x60_device_setup(void)
-{
- struct device_node *np, *np2;
- struct platform_device *pdev;
- int id, id2;
- int err;
-
- id = 0;
- for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") {
- err = mv64x60_mpsc_device_setup(np, id++);
- if (err)
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "serial device %pOF: error %d.\n",
- np, err);
- }
-
- id = 0;
- id2 = 0;
- for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
- pdev = mv64x60_eth_register_shared_pdev(np, id++);
- if (IS_ERR(pdev)) {
- err = PTR_ERR(pdev);
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "network block %pOF: error %d.\n",
- np, err);
- continue;
- }
- for_each_child_of_node(np, np2) {
- if (!of_device_is_compatible(np2,
- "marvell,mv64360-eth"))
- continue;
- err = mv64x60_eth_device_setup(np2, id2++, pdev);
- if (err)
- printk(KERN_ERR "Failed to initialize "
- "MV64x60 network device %pOF: "
- "error %d.\n",
- np2, err);
- }
- }
-
- id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c") {
- err = mv64x60_i2c_device_setup(np, id++);
- if (err)
- printk(KERN_ERR "Failed to initialize MV64x60 I2C "
- "bus %pOF: error %d.\n",
- np, err);
- }
-
- /* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
- if (np) {
- if ((err = mv64x60_wdt_device_setup(np, id)))
- printk(KERN_ERR "Failed to initialize MV64x60 "
- "Watchdog %pOF: error %d.\n",
- np, err);
- of_node_put(np);
- }
-
- /* Now add every node that is on the device bus */
- for_each_compatible_node(np, NULL, "marvell,mv64360")
- of_platform_bus_probe(np, of_mv64x60_devices, NULL);
-
- return 0;
-}
-arch_initcall(mv64x60_device_setup);
-
-static int __init mv64x60_add_mpsc_console(void)
-{
- struct device_node *np = NULL;
- const char *prop;
-
- prop = of_get_property(of_chosen, "linux,stdout-path", NULL);
- if (prop == NULL)
- goto not_mpsc;
-
- np = of_find_node_by_path(prop);
- if (!np)
- goto not_mpsc;
-
- if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
- goto not_mpsc;
-
- prop = of_get_property(np, "cell-index", NULL);
- if (!prop)
- goto not_mpsc;
-
- add_preferred_console("ttyMM", *(int *)prop, NULL);
-
-not_mpsc:
- return 0;
-}
-console_initcall(mv64x60_add_mpsc_console);
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
deleted file mode 100644
index 1afcdb428e51..000000000000
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <[email protected]>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/stat.h>
-#include <linux/pci.h>
-
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-
-#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
-
-#ifdef CONFIG_SYSFS
-/* 32-bit hex or dec stringified number + '\n' */
-#define MV64X60_VAL_LEN_MAX 11
-#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
-
-static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct pci_dev *phb;
- u32 v;
-
- if (off > 0)
- return 0;
- if (count < MV64X60_VAL_LEN_MAX)
- return -EINVAL;
-
- phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
- if (!phb)
- return -ENODEV;
- pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
- pci_dev_put(phb);
-
- return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- struct pci_dev *phb;
- u32 v;
-
- if (off > 0)
- return 0;
- if (count <= 0)
- return -EINVAL;
-
- if (sscanf(buf, "%i", &v) != 1)
- return -EINVAL;
-
- phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
- if (!phb)
- return -ENODEV;
- pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
- pci_dev_put(phb);
-
- return count;
-}
-
-static const struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
- .attr = {
- .name = "hs_reg",
- .mode = 0644,
- },
- .size = MV64X60_VAL_LEN_MAX,
- .read = mv64x60_hs_reg_read,
- .write = mv64x60_hs_reg_write,
-};
-
-static int __init mv64x60_sysfs_init(void)
-{
- struct device_node *np;
- struct platform_device *pdev;
- const unsigned int *prop;
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
- if (!np)
- return 0;
-
- prop = of_get_property(np, "hs_reg_valid", NULL);
- of_node_put(np);
-
- pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
-}
-
-subsys_initcall(mv64x60_sysfs_init);
-
-#endif /* CONFIG_SYSFS */
-
-static void mv64x60_pci_fixup_early(struct pci_dev *dev)
-{
- /*
- * Set the host bridge hdr_type to an invalid value so that
- * pci_setup_device() will ignore the host bridge.
- */
- dev->hdr_type = PCI_HEADER_TYPE_INVALID;
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
- mv64x60_pci_fixup_early);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
- mv64x60_pci_fixup_early);
-
-static int __init mv64x60_add_bridge(struct device_node *dev)
-{
- int len;
- struct pci_controller *hose;
- struct resource rsrc;
- const int *bus_range;
- int primary;
-
- memset(&rsrc, 0, sizeof(rsrc));
-
- /* Fetch host bridge registers address */
- if (of_address_to_resource(dev, 0, &rsrc)) {
- printk(KERN_ERR "No PCI reg property in device tree\n");
- return -ENODEV;
- }
-
- /* Get bus range if any */
- bus_range = of_get_property(dev, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int))
- printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
- " bus 0\n", dev);
-
- hose = pcibios_alloc_controller(dev);
- if (!hose)
- return -ENOMEM;
-
- hose->first_busno = bus_range ? bus_range[0] : 0;
- hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
- setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0);
- hose->self_busno = hose->first_busno;
-
- printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
- "Firmware bus number: %d->%d\n",
- (unsigned long long)rsrc.start, hose->first_busno,
- hose->last_busno);
-
- /* Interpret the "ranges" property */
- /* This also maps the I/O region and sets isa_io/mem_base */
- primary = (hose->first_busno == 0);
- pci_process_bridge_OF_ranges(hose, dev, primary);
-
- return 0;
-}
-
-void __init mv64x60_pci_init(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
- mv64x60_add_bridge(np);
-}
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
deleted file mode 100644
index a79953deb489..000000000000
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Interrupt handling for Marvell mv64360/mv64460 host bridges (Discovery)
- *
- * Author: Dale Farnsworth <[email protected]>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/irq.h>
-
-#include "mv64x60.h"
-
-/* Interrupt Controller Interface Registers */
-#define MV64X60_IC_MAIN_CAUSE_LO 0x0004
-#define MV64X60_IC_MAIN_CAUSE_HI 0x000c
-#define MV64X60_IC_CPU0_INTR_MASK_LO 0x0014
-#define MV64X60_IC_CPU0_INTR_MASK_HI 0x001c
-#define MV64X60_IC_CPU0_SELECT_CAUSE 0x0024
-
-#define MV64X60_HIGH_GPP_GROUPS 0x0f000000
-#define MV64X60_SELECT_CAUSE_HIGH 0x40000000
-
-/* General Purpose Pins Controller Interface Registers */
-#define MV64x60_GPP_INTR_CAUSE 0x0008
-#define MV64x60_GPP_INTR_MASK 0x000c
-
-#define MV64x60_LEVEL1_LOW 0
-#define MV64x60_LEVEL1_HIGH 1
-#define MV64x60_LEVEL1_GPP 2
-
-#define MV64x60_LEVEL1_MASK 0x00000060
-#define MV64x60_LEVEL1_OFFSET 5
-
-#define MV64x60_LEVEL2_MASK 0x0000001f
-
-#define MV64x60_NUM_IRQS 96
-
-static DEFINE_SPINLOCK(mv64x60_lock);
-
-static void __iomem *mv64x60_irq_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-/*
- * Interrupt Controller Handling
- *
- * The interrupt controller handles three groups of interrupts:
- * main low: IRQ0-IRQ31
- * main high: IRQ32-IRQ63
- * gpp: IRQ64-IRQ95
- *
- * This code handles interrupts in two levels. Level 1 selects the
- * interrupt group, and level 2 selects an IRQ within that group.
- * Each group has its own irq_chip structure.
- */
-
-static u32 mv64x60_cached_low_mask;
-static u32 mv64x60_cached_high_mask = MV64X60_HIGH_GPP_GROUPS;
-static u32 mv64x60_cached_gpp_mask;
-
-static struct irq_domain *mv64x60_irq_host;
-
-/*
- * mv64x60_chip_low functions
- */
-
-static void mv64x60_mask_low(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_low_mask &= ~(1 << level2);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
-}
-
-static void mv64x60_unmask_low(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_low_mask |= 1 << level2;
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO);
-}
-
-static struct irq_chip mv64x60_chip_low = {
- .name = "mv64x60_low",
- .irq_mask = mv64x60_mask_low,
- .irq_mask_ack = mv64x60_mask_low,
- .irq_unmask = mv64x60_unmask_low,
-};
-
-/*
- * mv64x60_chip_high functions
- */
-
-static void mv64x60_mask_high(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_high_mask &= ~(1 << level2);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
-}
-
-static void mv64x60_unmask_high(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_high_mask |= 1 << level2;
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI);
-}
-
-static struct irq_chip mv64x60_chip_high = {
- .name = "mv64x60_high",
- .irq_mask = mv64x60_mask_high,
- .irq_mask_ack = mv64x60_mask_high,
- .irq_unmask = mv64x60_unmask_high,
-};
-
-/*
- * mv64x60_chip_gpp functions
- */
-
-static void mv64x60_mask_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask &= ~(1 << level2);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
-}
-
-static void mv64x60_mask_ack_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask &= ~(1 << level2);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE,
- ~(1 << level2));
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE);
-}
-
-static void mv64x60_unmask_gpp(struct irq_data *d)
-{
- int level2 = irqd_to_hwirq(d) & MV64x60_LEVEL2_MASK;
- unsigned long flags;
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- mv64x60_cached_gpp_mask |= 1 << level2;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
- (void)in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK);
-}
-
-static struct irq_chip mv64x60_chip_gpp = {
- .name = "mv64x60_gpp",
- .irq_mask = mv64x60_mask_gpp,
- .irq_mask_ack = mv64x60_mask_ack_gpp,
- .irq_unmask = mv64x60_unmask_gpp,
-};
-
-/*
- * mv64x60_host_ops functions
- */
-
-static struct irq_chip *mv64x60_chips[] = {
- [MV64x60_LEVEL1_LOW] = &mv64x60_chip_low,
- [MV64x60_LEVEL1_HIGH] = &mv64x60_chip_high,
- [MV64x60_LEVEL1_GPP] = &mv64x60_chip_gpp,
-};
-
-static int mv64x60_host_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hwirq)
-{
- int level1;
-
- irq_set_status_flags(virq, IRQ_LEVEL);
-
- level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
- BUG_ON(level1 > MV64x60_LEVEL1_GPP);
- irq_set_chip_and_handler(virq, mv64x60_chips[level1],
- handle_level_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops mv64x60_host_ops = {
- .map = mv64x60_host_map,
-};
-
-/*
- * Global functions
- */
-
-void __init mv64x60_init_irq(void)
-{
- struct device_node *np;
- phys_addr_t paddr;
- unsigned int size;
- const unsigned int *reg;
- unsigned long flags;
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", &size);
- paddr = of_translate_address(np, reg);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
- of_node_put(np);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
- reg = of_get_property(np, "reg", &size);
- paddr = of_translate_address(np, reg);
- mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
-
- mv64x60_irq_host = irq_domain_add_linear(np, MV64x60_NUM_IRQS,
- &mv64x60_host_ops, NULL);
-
- spin_lock_irqsave(&mv64x60_lock, flags);
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_MASK,
- mv64x60_cached_gpp_mask);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_LO,
- mv64x60_cached_low_mask);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_INTR_MASK_HI,
- mv64x60_cached_high_mask);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_INTR_CAUSE, 0);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_LO, 0);
- out_le32(mv64x60_irq_reg_base + MV64X60_IC_MAIN_CAUSE_HI, 0);
- spin_unlock_irqrestore(&mv64x60_lock, flags);
-}
-
-unsigned int mv64x60_get_irq(void)
-{
- u32 cause;
- int level1;
- irq_hw_number_t hwirq;
- int virq = 0;
-
- cause = in_le32(mv64x60_irq_reg_base + MV64X60_IC_CPU0_SELECT_CAUSE);
- if (cause & MV64X60_SELECT_CAUSE_HIGH) {
- cause &= mv64x60_cached_high_mask;
- level1 = MV64x60_LEVEL1_HIGH;
- if (cause & MV64X60_HIGH_GPP_GROUPS) {
- cause = in_le32(mv64x60_gpp_reg_base +
- MV64x60_GPP_INTR_CAUSE);
- cause &= mv64x60_cached_gpp_mask;
- level1 = MV64x60_LEVEL1_GPP;
- }
- } else {
- cause &= mv64x60_cached_low_mask;
- level1 = MV64x60_LEVEL1_LOW;
- }
- if (cause) {
- hwirq = (level1 << MV64x60_LEVEL1_OFFSET) | __ilog2(cause);
- virq = irq_linear_revmap(mv64x60_irq_host, hwirq);
- }
-
- return virq;
-}
diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c
deleted file mode 100644
index 3b8734b870e9..000000000000
--- a/arch/powerpc/sysdev/mv64x60_udbg.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * udbg serial input/output routines for the Marvell MV64x60 (Discovery).
- *
- * Author: Dale Farnsworth <[email protected]>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MPSC_0_CR1_OFFSET 0x000c
-
-#define MPSC_0_CR2_OFFSET 0x0010
-#define MPSC_CHR_2_TCS (1 << 9)
-
-#define MPSC_0_CHR_10_OFFSET 0x0030
-
-#define MPSC_INTR_CAUSE_OFF_0 0x0004
-#define MPSC_INTR_CAUSE_OFF_1 0x000c
-#define MPSC_INTR_CAUSE_RCC (1<<6)
-
-static void __iomem *mpsc_base;
-static void __iomem *mpsc_intr_cause;
-
-static void mv64x60_udbg_putc(char c)
-{
- if (c == '\n')
- mv64x60_udbg_putc('\r');
-
- while(in_le32(mpsc_base + MPSC_0_CR2_OFFSET) & MPSC_CHR_2_TCS)
- ;
- out_le32(mpsc_base + MPSC_0_CR1_OFFSET, c);
- out_le32(mpsc_base + MPSC_0_CR2_OFFSET, MPSC_CHR_2_TCS);
-}
-
-static int mv64x60_udbg_testc(void)
-{
- return (in_le32(mpsc_intr_cause) & MPSC_INTR_CAUSE_RCC) != 0;
-}
-
-static int mv64x60_udbg_getc(void)
-{
- int cause = 0;
- int c;
-
- while (!mv64x60_udbg_testc())
- ;
-
- c = in_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2);
- out_8(mpsc_base + MPSC_0_CHR_10_OFFSET + 2, c);
- out_le32(mpsc_intr_cause, cause & ~MPSC_INTR_CAUSE_RCC);
- return c;
-}
-
-static int mv64x60_udbg_getc_poll(void)
-{
- if (!mv64x60_udbg_testc())
- return -1;
-
- return mv64x60_udbg_getc();
-}
-
-static void mv64x60_udbg_init(void)
-{
- struct device_node *np, *mpscintr, *stdout = NULL;
- const char *path;
- const phandle *ph;
- struct resource r[2];
- const int *block_index;
- int intr_cause_offset;
- int err;
-
- path = of_get_property(of_chosen, "linux,stdout-path", NULL);
- if (!path)
- return;
-
- stdout = of_find_node_by_path(path);
- if (!stdout)
- return;
-
- for_each_compatible_node(np, NULL, "marvell,mv64360-mpsc") {
- if (np == stdout)
- break;
- }
-
- of_node_put(stdout);
- if (!np)
- return;
-
- block_index = of_get_property(np, "cell-index", NULL);
- if (!block_index)
- goto error;
-
- switch (*block_index) {
- case 0:
- intr_cause_offset = MPSC_INTR_CAUSE_OFF_0;
- break;
- case 1:
- intr_cause_offset = MPSC_INTR_CAUSE_OFF_1;
- break;
- default:
- goto error;
- }
-
- err = of_address_to_resource(np, 0, &r[0]);
- if (err)
- goto error;
-
- ph = of_get_property(np, "mpscintr", NULL);
- mpscintr = of_find_node_by_phandle(*ph);
- if (!mpscintr)
- goto error;
-
- err = of_address_to_resource(mpscintr, 0, &r[1]);
- of_node_put(mpscintr);
- if (err)
- goto error;
-
- of_node_put(np);
-
- mpsc_base = ioremap(r[0].start, resource_size(&r[0]));
- if (!mpsc_base)
- return;
-
- mpsc_intr_cause = ioremap(r[1].start, resource_size(&r[1]));
- if (!mpsc_intr_cause) {
- iounmap(mpsc_base);
- return;
- }
- mpsc_intr_cause += intr_cause_offset;
-
- udbg_putc = mv64x60_udbg_putc;
- udbg_getc = mv64x60_udbg_getc;
- udbg_getc_poll = mv64x60_udbg_getc_poll;
-
- return;
-
-error:
- of_node_put(np);
-}
-
-void mv64x60_init_early(void)
-{
- mv64x60_udbg_init();
-}
--
2.16.2
The C2K platform appears to be orphaned so remove code supporting it.
CC: Remi Machet <[email protected]>
Signed-off-by: Mark Greer <[email protected]>
---
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/cuboot-c2k.c | 189 --------------
arch/powerpc/boot/dts/c2k.dts | 366 --------------------------
arch/powerpc/configs/c2k_defconfig | 390 ----------------------------
arch/powerpc/platforms/embedded6xx/Kconfig | 10 -
arch/powerpc/platforms/embedded6xx/Makefile | 1 -
arch/powerpc/platforms/embedded6xx/c2k.c | 148 -----------
7 files changed, 2 insertions(+), 1107 deletions(-)
delete mode 100644 arch/powerpc/boot/cuboot-c2k.c
delete mode 100644 arch/powerpc/boot/dts/c2k.dts
delete mode 100644 arch/powerpc/configs/c2k_defconfig
delete mode 100644 arch/powerpc/platforms/embedded6xx/c2k.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 26d5d2a5b8e9..70bf9b409fae 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -143,8 +143,8 @@ src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
- gamecube.c wii-head.S wii.c holly.c \
+ gamecube-head.S gamecube.c \
+ wii-head.S wii.c holly.c \
fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
@@ -339,7 +339,6 @@ image-$(CONFIG_MVME7100) += dtbImage.mvme7100
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
-image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
image-$(CONFIG_MVME5100) += dtbImage.mvme5100
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
deleted file mode 100644
index 9309c51f1d65..000000000000
--- a/arch/powerpc/boot/cuboot-c2k.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * GEFanuc C2K platform code.
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "types.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "elf.h"
-#include "mv64x60.h"
-#include "cuboot.h"
-#include "ppcboot.h"
-
-static u8 *bridge_base;
-
-static void c2k_bridge_setup(u32 mem_size)
-{
- u32 i, v[30], enables, acc_bits;
- u32 pci_base_hi, pci_base_lo, size, buf[2];
- unsigned long cpu_base;
- int rc;
- void *devp, *mv64x60_devp;
- u8 *bridge_pbase, is_coherent;
- struct mv64x60_cpu2pci_win *tbl;
- int bus;
-
- bridge_pbase = mv64x60_get_bridge_pbase();
- is_coherent = mv64x60_is_coherent();
-
- if (is_coherent)
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
- else
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
- mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
- mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (mv64x60_devp == NULL)
- fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
- enables |= 0x007ffe00; /* Disable all cpu->pci windows */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = NULL;
- for (bus = 0; ; bus++) {
- char name[] = "pci ";
-
- name[strlen(name)-1] = bus+'0';
-
- devp = find_node_by_alias(name);
- if (devp == NULL)
- break;
-
- if (bus >= 2)
- fatal("Error: Only 2 PCI controllers are supported at" \
- " this time.\n");
-
- mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
- mem_size, acc_bits);
-
- rc = getprop(devp, "ranges", v, sizeof(v));
- if (rc == 0)
- fatal("Error: Can't find marvell,mv64360-pci ranges"
- " property\n\r");
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
-
- for (i = 0; i < rc; i += 6) {
- switch (v[i] & 0xff000000) {
- case 0x01000000: /* PCI I/O Space */
- tbl = mv64x60_cpu2pci_io;
- break;
- case 0x02000000: /* PCI MEM Space */
- tbl = mv64x60_cpu2pci_mem;
- break;
- default:
- continue;
- }
-
- pci_base_hi = v[i+1];
- pci_base_lo = v[i+2];
- cpu_base = v[i+3];
- size = v[i+5];
-
- buf[0] = cpu_base;
- buf[1] = size;
-
- if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
- fatal("Error: Can't translate PCI address " \
- "0x%x\n\r", (u32)cpu_base);
-
- mv64x60_config_cpu2pci_window(bridge_base, bus,
- pci_base_hi, pci_base_lo, cpu_base, size, tbl);
- }
-
- enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
- cpu->pci<bus> mem0 */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
- enables);
- };
-}
-
-static void c2k_fixups(void)
-{
- u32 mem_size;
-
- mem_size = mv64x60_get_mem_size(bridge_base);
- c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
-}
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE_SET 0xf118
-
-static void c2k_reset(void)
-{
- u32 temp;
-
- udelay(5000000);
-
- if (bridge_base != 0) {
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
- 0x00080004);
- }
-
- for (;;);
-}
-
-static bd_t bd;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- CUBOOT_INIT();
-
- fdt_init(_dtb_start);
-
- bridge_base = mv64x60_get_bridge_base();
-
- platform_ops.fixups = c2k_fixups;
- platform_ops.exit = c2k_reset;
-
- if (serial_console_init() < 0)
- exit();
-}
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
deleted file mode 100644
index c5beb72d18b7..000000000000
--- a/arch/powerpc/boot/dts/c2k.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Device Tree Source for GEFanuc C2K
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.dts
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "C2K";
- compatible = "GEFanuc,C2K";
- coherency-off;
-
- aliases {
- pci0 = &PCI0;
- pci1 = &PCI1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "PowerPC,7447";
- reg = <0>;
- clock-frequency = <996000000>; /* 996 MHz */
- bus-frequency = <166666667>; /* 166.6666 MHz */
- timebase-frequency = <41666667>; /* 166.6666/4 MHz */
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <32768>;
- d-cache-size = <32768>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1GB */
- };
-
- system-controller@d8000000 { /* Marvell Discovery */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64460";
- compatible = "marvell,mv64360";
- clock-frequency = <166666667>; /* 166.66... MHz */
- reg = <0xd8000000 0x00010000>;
- virtual-reg = <0xd8000000>;
- ranges = <0xd4000000 0xd4000000 0x01000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x08000000 /* PCI 0 MEM Space */
- 0xd0000000 0xd0000000 0x01000000 /* PCI 1 I/O Space */
- 0xa0000000 0xa0000000 0x08000000 /* PCI 1 MEM Space */
- 0xd8100000 0xd8100000 0x00010000 /* FPGA */
- 0xd8110000 0xd8110000 0x00010000 /* FPGA USARTs */
- 0xf8000000 0xf8000000 0x08000000 /* User FLASH */
- 0x00000000 0xd8000000 0x00010000 /* Bridge's regs */
- 0xd8140000 0xd8140000 0x00040000>; /* Integrated SRAM */
-
- mdio@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
- reg = <0x2000 4>;
- PHY0: ethernet-phy@0 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <0>;
- };
- PHY1: ethernet-phy@1 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
- PHY2: ethernet-phy@2 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <2>;
- };
- };
-
- ethernet-group@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-group";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@1 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <1>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- phy = <&PHY1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@2 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <2>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- phy = <&PHY2>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- SDMA0: sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xd8004000>;
- interrupt-base = <0>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
- SDMA1: sdma@6000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x6000 0xc18>;
- virtual-reg = <0xd8006000>;
- interrupt-base = <0>;
- interrupts = <38>;
- interrupt-parent = <&PIC>;
- };
-
- BRG0: brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- BRG1: brg@b208 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb208 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- CUNIT: cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
- MPSCROUTING: mpscrouting@b400 {
- reg = <0xb400 0xc>;
- };
-
- MPSCINTR: mpscintr@b800 {
- reg = <0xb800 0x100>;
- virtual-reg = <0xd800b800>;
- };
-
- MPSC0: mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xd8008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
- MPSC1: mpsc@9000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x9000 0x38>;
- virtual-reg = <0xd8009000>;
- sdma = <&SDMA1>;
- brg = <&BRG1>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <1>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
-
- wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
- i2c@c000 {
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xd800c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
- PIC: pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0000 0x88>;
- interrupt-controller;
- };
-
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
- gpp@f100 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
- PCI0: pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0cf8 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0c34>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
- interrupt-map = <
- /* Only one interrupt line for PMC0 slot (INTA) */
- 0x0000 0 0 1 &PIC 88
- >;
- };
-
-
- PCI1: pci@a0000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0c78 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0cb4>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
- interrupt-map = <
- /* IDSEL 0x01: PMC1 ? */
- 0x0800 0 0 1 &PIC 88
- /* IDSEL 0x02: cPCI bridge */
- 0x1000 0 0 1 &PIC 88
- /* IDSEL 0x03: USB controller */
- 0x1800 0 0 1 &PIC 91
- /* IDSEL 0x04: SATA controller */
- 0x2000 0 0 1 &PIC 95
- >;
- };
-
- cpu-error@70 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x0070 0x10 0x0128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- sram-ctrl@380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x0380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0x0c28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1dc0 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1dc0 0x40 0x0ca8 0x4>;
- interrupts = <16>;
- interrupt-parent = <&PIC>;
- };
-
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
- /* Devices attached to the device controller */
- devicebus@45c {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "marvell,mv64306-devctrl";
- reg = <0x45C 0x88>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- ranges = <0 0 0xd8100000 0x10000
- 2 0 0xd8110000 0x10000
- 4 0 0xf8000000 0x8000000>;
- fpga@0,0 {
- compatible = "sbs,fpga-c2k";
- reg = <0 0 0x10000>;
- };
- fpga_usart@2,0 {
- compatible = "sbs,fpga_usart-c2k";
- reg = <2 0 0x10000>;
- };
- nor_flash@4,0 {
- compatible = "cfi-flash";
- reg = <4 0 0x8000000>; /* 128MB */
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00080000>;
- };
- partition@40000 {
- label = "kernel";
- reg = <0x00080000 0x00400000>;
- };
- partition@440000 {
- label = "initrd";
- reg = <0x00480000 0x00B80000>;
- };
- partition@1000000 {
- label = "rootfs";
- reg = <0x01000000 0x06800000>;
- };
- partition@7800000 {
- label = "recovery";
- reg = <0x07800000 0x00800000>;
- read-only;
- };
- };
- };
- };
- chosen {
- stdout-path = &MPSC0;
- };
-};
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
deleted file mode 100644
index 4bb832a41d55..000000000000
--- a/arch/powerpc/configs/c2k_defconfig
+++ /dev/null
@@ -1,390 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_OSF_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_EMBEDDED6xx=y
-CONFIG_PPC_C2K=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_GEN_RTC=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_ARCMSR=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=m
-CONFIG_TUN=m
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_NVRAM=m
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MV64XXX=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_SRP=m
-CONFIG_DMADEVICES=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 9fb2d5912c5a..8ea16db5ff48 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -48,16 +48,6 @@ config PPC_HOLLY
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
-config PPC_C2K
- bool "SBS/GEFanuc C2K board"
- depends on EMBEDDED6xx
- select MV64X60
- select NOT_COHERENT_CACHE
- select MTD_CFI_I4
- help
- This option enables support for the GE Fanuc C2K board (formerly
- an SBS board).
-
config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 12154e3257ad..e656ae9f23c6 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
-obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
deleted file mode 100644
index d19e4e759597..000000000000
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Board setup routines for the GEFanuc C2K board
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-#include <linux/time.h>
-#include <linux/of.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0 0x0000
-#define MV64x60_MPP_CNTL_2 0x0008
-
-#define MV64x60_GPP_IO_CNTL 0x0000
-#define MV64x60_GPP_LEVEL_CNTL 0x0010
-#define MV64x60_GPP_VALUE_SET 0x0018
-
-static void __iomem *mv64x60_mpp_reg_base;
-static void __iomem *mv64x60_gpp_reg_base;
-
-static void __init c2k_setup_arch(void)
-{
- struct device_node *np;
- phys_addr_t paddr;
- const unsigned int *reg;
-
- /*
- * ioremap mpp and gpp registers in case they are later
- * needed by c2k_reset_board().
- */
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
- mv64x60_pci_init();
-#endif
-}
-
-static void c2k_reset_board(void)
-{
- u32 temp;
-
- local_irq_disable();
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void __noreturn c2k_restart(char *cmd)
-{
- c2k_reset_board();
- msleep(100);
- panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define COHERENCY_SETTING "off"
-#else
-#define COHERENCY_SETTING "on"
-#endif
-
-void c2k_show_cpuinfo(struct seq_file *m)
-{
- seq_printf(m, "Vendor\t\t: GEFanuc\n");
- seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init c2k_probe(void)
-{
- if (!of_machine_is_compatible("GEFanuc,C2K"))
- return 0;
-
- printk(KERN_INFO "Detected a GEFanuc C2K board\n");
-
- _set_L2CR(0);
- _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
-
- mv64x60_init_early();
-
- return 1;
-}
-
-define_machine(c2k) {
- .name = "C2K",
- .probe = c2k_probe,
- .setup_arch = c2k_setup_arch,
- .show_cpuinfo = c2k_show_cpuinfo,
- .init_IRQ = mv64x60_init_irq,
- .get_irq = mv64x60_get_irq,
- .restart = c2k_restart,
- .calibrate_decr = generic_calibrate_decr,
-};
--
2.16.2
There are no longer any platforms that use Marvell's mv64x60
hostbridges so remove the supporting boot code.
Signed-off-by: Mark Greer <[email protected]>
---
arch/powerpc/boot/Makefile | 2 +-
arch/powerpc/boot/mv64x60.c | 581 --------------------------------------------
arch/powerpc/boot/mv64x60.h | 70 ------
3 files changed, 1 insertion(+), 652 deletions(-)
delete mode 100644 arch/powerpc/boot/mv64x60.c
delete mode 100644 arch/powerpc/boot/mv64x60.h
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index bf6a46055ba7..fa16626849f4 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -120,7 +120,7 @@ src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
src-wlib-$(CONFIG_CPM) += cpm-serial.c
diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c
deleted file mode 100644
index d9bb302b91d2..000000000000
--- a/arch/powerpc/boot/mv64x60.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/*
- * Marvell hostbridge routines
- *
- * Author: Mark A. Greer <[email protected]>
- *
- * 2004, 2005, 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "mv64x60.h"
-
-#define PCI_DEVFN(slot,func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
-
-#define MV64x60_CPU2MEM_WINDOWS 4
-#define MV64x60_CPU2MEM_0_BASE 0x0008
-#define MV64x60_CPU2MEM_0_SIZE 0x0010
-#define MV64x60_CPU2MEM_1_BASE 0x0208
-#define MV64x60_CPU2MEM_1_SIZE 0x0210
-#define MV64x60_CPU2MEM_2_BASE 0x0018
-#define MV64x60_CPU2MEM_2_SIZE 0x0020
-#define MV64x60_CPU2MEM_3_BASE 0x0218
-#define MV64x60_CPU2MEM_3_SIZE 0x0220
-
-#define MV64x60_ENET2MEM_BAR_ENABLE 0x2290
-#define MV64x60_ENET2MEM_0_BASE 0x2200
-#define MV64x60_ENET2MEM_0_SIZE 0x2204
-#define MV64x60_ENET2MEM_1_BASE 0x2208
-#define MV64x60_ENET2MEM_1_SIZE 0x220c
-#define MV64x60_ENET2MEM_2_BASE 0x2210
-#define MV64x60_ENET2MEM_2_SIZE 0x2214
-#define MV64x60_ENET2MEM_3_BASE 0x2218
-#define MV64x60_ENET2MEM_3_SIZE 0x221c
-#define MV64x60_ENET2MEM_4_BASE 0x2220
-#define MV64x60_ENET2MEM_4_SIZE 0x2224
-#define MV64x60_ENET2MEM_5_BASE 0x2228
-#define MV64x60_ENET2MEM_5_SIZE 0x222c
-#define MV64x60_ENET2MEM_ACC_PROT_0 0x2294
-#define MV64x60_ENET2MEM_ACC_PROT_1 0x2298
-#define MV64x60_ENET2MEM_ACC_PROT_2 0x229c
-
-#define MV64x60_MPSC2MEM_BAR_ENABLE 0xf250
-#define MV64x60_MPSC2MEM_0_BASE 0xf200
-#define MV64x60_MPSC2MEM_0_SIZE 0xf204
-#define MV64x60_MPSC2MEM_1_BASE 0xf208
-#define MV64x60_MPSC2MEM_1_SIZE 0xf20c
-#define MV64x60_MPSC2MEM_2_BASE 0xf210
-#define MV64x60_MPSC2MEM_2_SIZE 0xf214
-#define MV64x60_MPSC2MEM_3_BASE 0xf218
-#define MV64x60_MPSC2MEM_3_SIZE 0xf21c
-#define MV64x60_MPSC_0_REMAP 0xf240
-#define MV64x60_MPSC_1_REMAP 0xf244
-#define MV64x60_MPSC2MEM_ACC_PROT_0 0xf254
-#define MV64x60_MPSC2MEM_ACC_PROT_1 0xf258
-#define MV64x60_MPSC2REGS_BASE 0xf25c
-
-#define MV64x60_IDMA2MEM_BAR_ENABLE 0x0a80
-#define MV64x60_IDMA2MEM_0_BASE 0x0a00
-#define MV64x60_IDMA2MEM_0_SIZE 0x0a04
-#define MV64x60_IDMA2MEM_1_BASE 0x0a08
-#define MV64x60_IDMA2MEM_1_SIZE 0x0a0c
-#define MV64x60_IDMA2MEM_2_BASE 0x0a10
-#define MV64x60_IDMA2MEM_2_SIZE 0x0a14
-#define MV64x60_IDMA2MEM_3_BASE 0x0a18
-#define MV64x60_IDMA2MEM_3_SIZE 0x0a1c
-#define MV64x60_IDMA2MEM_4_BASE 0x0a20
-#define MV64x60_IDMA2MEM_4_SIZE 0x0a24
-#define MV64x60_IDMA2MEM_5_BASE 0x0a28
-#define MV64x60_IDMA2MEM_5_SIZE 0x0a2c
-#define MV64x60_IDMA2MEM_6_BASE 0x0a30
-#define MV64x60_IDMA2MEM_6_SIZE 0x0a34
-#define MV64x60_IDMA2MEM_7_BASE 0x0a38
-#define MV64x60_IDMA2MEM_7_SIZE 0x0a3c
-#define MV64x60_IDMA2MEM_ACC_PROT_0 0x0a70
-#define MV64x60_IDMA2MEM_ACC_PROT_1 0x0a74
-#define MV64x60_IDMA2MEM_ACC_PROT_2 0x0a78
-#define MV64x60_IDMA2MEM_ACC_PROT_3 0x0a7c
-
-#define MV64x60_PCI_ACC_CNTL_WINDOWS 6
-#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c
-#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc
-
-#define MV64x60_PCI0_BAR_ENABLE 0x0c3c
-#define MV64x60_PCI02MEM_0_SIZE 0x0c08
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04
-#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14
-#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24
-#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34
-#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44
-#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54
-#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58
-
-#define MV64x60_PCI1_BAR_ENABLE 0x0cbc
-#define MV64x60_PCI12MEM_0_SIZE 0x0c88
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84
-#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94
-#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4
-#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4
-#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4
-#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4
-#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8
-
-#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000
-
-#define MV64x60_CPU2PCI0_IO_BASE 0x0048
-#define MV64x60_CPU2PCI0_IO_SIZE 0x0050
-#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0
-#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058
-#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320
-
-#define MV64x60_CPU2PCI1_IO_BASE 0x0090
-#define MV64x60_CPU2PCI1_IO_SIZE 0x0098
-#define MV64x60_CPU2PCI1_IO_REMAP 0x0108
-#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0
-#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340
-
-struct mv64x60_mem_win {
- u32 hi;
- u32 lo;
- u32 size;
-};
-
-struct mv64x60_pci_win {
- u32 fcn;
- u32 hi;
- u32 lo;
- u32 size;
-};
-
-/* PCI config access routines */
-struct {
- u32 addr;
- u32 data;
-} static mv64x60_pci_cfgio[2] = {
- { /* hose 0 */
- .addr = 0xcf8,
- .data = 0xcfc,
- },
- { /* hose 1 */
- .addr = 0xc78,
- .data = 0xc7c,
- }
-};
-
-u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset)
-{
- out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
- (1 << 31) | (bus << 16) | (devfn << 8) | offset);
- return in_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data));
-}
-
-void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset,
- u32 val)
-{
- out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
- (1 << 31) | (bus << 16) | (devfn << 8) | offset);
- out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data), val);
-}
-
-/* I/O ctlr -> system memory setup */
-static struct mv64x60_mem_win mv64x60_cpu2mem[MV64x60_CPU2MEM_WINDOWS] = {
- {
- .lo = MV64x60_CPU2MEM_0_BASE,
- .size = MV64x60_CPU2MEM_0_SIZE,
- },
- {
- .lo = MV64x60_CPU2MEM_1_BASE,
- .size = MV64x60_CPU2MEM_1_SIZE,
- },
- {
- .lo = MV64x60_CPU2MEM_2_BASE,
- .size = MV64x60_CPU2MEM_2_SIZE,
- },
- {
- .lo = MV64x60_CPU2MEM_3_BASE,
- .size = MV64x60_CPU2MEM_3_SIZE,
- },
-};
-
-static struct mv64x60_mem_win mv64x60_enet2mem[MV64x60_CPU2MEM_WINDOWS] = {
- {
- .lo = MV64x60_ENET2MEM_0_BASE,
- .size = MV64x60_ENET2MEM_0_SIZE,
- },
- {
- .lo = MV64x60_ENET2MEM_1_BASE,
- .size = MV64x60_ENET2MEM_1_SIZE,
- },
- {
- .lo = MV64x60_ENET2MEM_2_BASE,
- .size = MV64x60_ENET2MEM_2_SIZE,
- },
- {
- .lo = MV64x60_ENET2MEM_3_BASE,
- .size = MV64x60_ENET2MEM_3_SIZE,
- },
-};
-
-static struct mv64x60_mem_win mv64x60_mpsc2mem[MV64x60_CPU2MEM_WINDOWS] = {
- {
- .lo = MV64x60_MPSC2MEM_0_BASE,
- .size = MV64x60_MPSC2MEM_0_SIZE,
- },
- {
- .lo = MV64x60_MPSC2MEM_1_BASE,
- .size = MV64x60_MPSC2MEM_1_SIZE,
- },
- {
- .lo = MV64x60_MPSC2MEM_2_BASE,
- .size = MV64x60_MPSC2MEM_2_SIZE,
- },
- {
- .lo = MV64x60_MPSC2MEM_3_BASE,
- .size = MV64x60_MPSC2MEM_3_SIZE,
- },
-};
-
-static struct mv64x60_mem_win mv64x60_idma2mem[MV64x60_CPU2MEM_WINDOWS] = {
- {
- .lo = MV64x60_IDMA2MEM_0_BASE,
- .size = MV64x60_IDMA2MEM_0_SIZE,
- },
- {
- .lo = MV64x60_IDMA2MEM_1_BASE,
- .size = MV64x60_IDMA2MEM_1_SIZE,
- },
- {
- .lo = MV64x60_IDMA2MEM_2_BASE,
- .size = MV64x60_IDMA2MEM_2_SIZE,
- },
- {
- .lo = MV64x60_IDMA2MEM_3_BASE,
- .size = MV64x60_IDMA2MEM_3_SIZE,
- },
-};
-
-static u32 mv64x60_dram_selects[MV64x60_CPU2MEM_WINDOWS] = {0xe,0xd,0xb,0x7};
-
-/*
- * ENET, MPSC, and IDMA ctlrs on the MV64x60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- * Configure them to be same as cpu->memory windows.
- */
-void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
- u8 is_coherent)
-{
- u32 i, base, size, enables, prot = 0, snoop_bits = 0;
-
- /* Disable ctlr->mem windows */
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0x3f);
- out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), 0xf);
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0xff);
-
- if (is_coherent)
- snoop_bits = 0x2 << 12; /* Writeback */
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
-
- for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
- if (enables & (1 << i)) /* Set means disabled */
- continue;
-
- base = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].lo))
- << 16;
- base |= snoop_bits | (mv64x60_dram_selects[i] << 8);
- size = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].size))
- << 16;
- prot |= (0x3 << (i << 1)); /* RW access */
-
- out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].lo), base);
- out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].size), size);
- out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].lo), base);
- out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].size), size);
- out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].lo), base);
- out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].size), size);
- }
-
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_0), prot);
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_1), prot);
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_2), prot);
- out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_0), prot);
- out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_1), prot);
- out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_0), prot);
- out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_1), prot);
- out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_2), prot);
- out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_3), prot);
-
- /* Set mpsc->bridge's reg window to the bridge's internal registers. */
- out_le32((u32 *)(bridge_base + MV64x60_MPSC2REGS_BASE),
- (u32)bridge_pbase);
-
- out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), enables);
- out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), enables);
- out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_BAR_ENABLE), enables);
-}
-
-/* PCI MEM -> system memory, et. al. setup */
-static struct mv64x60_pci_win mv64x60_pci2mem[2] = {
- { /* hose 0 */
- .fcn = 0,
- .hi = 0x14,
- .lo = 0x10,
- .size = MV64x60_PCI02MEM_0_SIZE,
- },
- { /* hose 1 */
- .fcn = 0,
- .hi = 0x94,
- .lo = 0x90,
- .size = MV64x60_PCI12MEM_0_SIZE,
- },
-};
-
-static struct
-mv64x60_mem_win mv64x60_pci_acc[2][MV64x60_PCI_ACC_CNTL_WINDOWS] = {
- { /* hose 0 */
- {
- .hi = MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
- .lo = MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
- .size = MV64x60_PCI0_ACC_CNTL_0_SIZE,
- },
- {
- .hi = MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
- .lo = MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
- .size = MV64x60_PCI0_ACC_CNTL_1_SIZE,
- },
- {
- .hi = MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
- .lo = MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
- .size = MV64x60_PCI0_ACC_CNTL_2_SIZE,
- },
- {
- .hi = MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
- .lo = MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
- .size = MV64x60_PCI0_ACC_CNTL_3_SIZE,
- },
- },
- { /* hose 1 */
- {
- .hi = MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
- .lo = MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
- .size = MV64x60_PCI1_ACC_CNTL_0_SIZE,
- },
- {
- .hi = MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
- .lo = MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
- .size = MV64x60_PCI1_ACC_CNTL_1_SIZE,
- },
- {
- .hi = MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
- .lo = MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
- .size = MV64x60_PCI1_ACC_CNTL_2_SIZE,
- },
- {
- .hi = MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
- .lo = MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
- .size = MV64x60_PCI1_ACC_CNTL_3_SIZE,
- },
- },
-};
-
-static struct mv64x60_mem_win mv64x60_pci2reg[2] = {
- {
- .hi = 0x24,
- .lo = 0x20,
- .size = 0,
- },
- {
- .hi = 0xa4,
- .lo = 0xa0,
- .size = 0,
- },
-};
-
-/* Only need to use 1 window (per hose) to get access to all of system memory */
-void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
- u8 bus, u32 mem_size, u32 acc_bits)
-{
- u32 i, offset, bar_enable, enables;
-
- /* Disable all windows but PCI MEM -> Bridge's regs window */
- enables = ~(1 << 9);
- bar_enable = hose ? MV64x60_PCI1_BAR_ENABLE : MV64x60_PCI0_BAR_ENABLE;
- out_le32((u32 *)(bridge_base + bar_enable), enables);
-
- for (i=0; i<MV64x60_PCI_ACC_CNTL_WINDOWS; i++)
- out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][i].lo), 0);
-
- /* If mem_size is 0, leave windows disabled */
- if (mem_size == 0)
- return;
-
- /* Cause automatic updates of PCI remap regs */
- offset = hose ?
- MV64x60_PCI1_PCI_DECODE_CNTL : MV64x60_PCI0_PCI_DECODE_CNTL;
- i = in_le32((u32 *)(bridge_base + offset));
- out_le32((u32 *)(bridge_base + offset), i & ~0x1);
-
- mem_size = (mem_size - 1) & 0xfffff000;
-
- /* Map PCI MEM addr 0 -> System Mem addr 0 */
- mv64x60_cfg_write(bridge_base, hose, bus,
- PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
- mv64x60_pci2mem[hose].hi, 0);
- mv64x60_cfg_write(bridge_base, hose, bus,
- PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
- mv64x60_pci2mem[hose].lo, 0);
- out_le32((u32 *)(bridge_base + mv64x60_pci2mem[hose].size),mem_size);
-
- acc_bits |= MV64x60_PCI_ACC_CNTL_ENABLE;
- out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].hi), 0);
- out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].lo), acc_bits);
- out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].size),mem_size);
-
- /* Set PCI MEM->bridge's reg window to where they are in CPU mem map */
- i = (u32)bridge_base;
- i &= 0xffff0000;
- i |= (0x2 << 1);
- mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
- mv64x60_pci2reg[hose].hi, 0);
- mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
- mv64x60_pci2reg[hose].lo, i);
-
- enables &= ~0x1; /* Enable PCI MEM -> System Mem window 0 */
- out_le32((u32 *)(bridge_base + bar_enable), enables);
-}
-
-/* CPU -> PCI I/O & MEM setup */
-struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2] = {
- { /* hose 0 */
- .lo = MV64x60_CPU2PCI0_IO_BASE,
- .size = MV64x60_CPU2PCI0_IO_SIZE,
- .remap_hi = 0,
- .remap_lo = MV64x60_CPU2PCI0_IO_REMAP,
- },
- { /* hose 1 */
- .lo = MV64x60_CPU2PCI1_IO_BASE,
- .size = MV64x60_CPU2PCI1_IO_SIZE,
- .remap_hi = 0,
- .remap_lo = MV64x60_CPU2PCI1_IO_REMAP,
- },
-};
-
-struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2] = {
- { /* hose 0 */
- .lo = MV64x60_CPU2PCI0_MEM_0_BASE,
- .size = MV64x60_CPU2PCI0_MEM_0_SIZE,
- .remap_hi = MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
- .remap_lo = MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
- },
- { /* hose 1 */
- .lo = MV64x60_CPU2PCI1_MEM_0_BASE,
- .size = MV64x60_CPU2PCI1_MEM_0_SIZE,
- .remap_hi = MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
- .remap_lo = MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
- },
-};
-
-/* Only need to set up 1 window to pci mem space */
-void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
- u32 pci_base_lo, u32 cpu_base, u32 size,
- struct mv64x60_cpu2pci_win *offset_tbl)
-{
- cpu_base >>= 16;
- cpu_base |= MV64x60_CPU2PCI_SWAP_NONE;
- out_le32((u32 *)(bridge_base + offset_tbl[hose].lo), cpu_base);
-
- if (offset_tbl[hose].remap_hi != 0)
- out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_hi),
- pci_base_hi);
- out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_lo),
- pci_base_lo >> 16);
-
- size = (size - 1) >> 16;
- out_le32((u32 *)(bridge_base + offset_tbl[hose].size), size);
-}
-
-/* Read mem ctlr to get the amount of mem in system */
-u32 mv64x60_get_mem_size(u8 *bridge_base)
-{
- u32 enables, i, v;
- u32 mem = 0;
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
-
- for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
- if (!(enables & (1<<i))) {
- v = in_le32((u32*)(bridge_base
- + mv64x60_cpu2mem[i].size));
- v = ((v & 0xffff) + 1) << 16;
- mem += v;
- }
-
- return mem;
-}
-
-/* Get physical address of bridge's registers */
-u8 *mv64x60_get_bridge_pbase(void)
-{
- u32 v[2];
- void *devp;
-
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- goto err_out;
- if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
- goto err_out;
-
- return (u8 *)v[0];
-
-err_out:
- return 0;
-}
-
-/* Get virtual address of bridge's registers */
-u8 *mv64x60_get_bridge_base(void)
-{
- u32 v;
- void *devp;
-
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- goto err_out;
- if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
- goto err_out;
-
- return (u8 *)v;
-
-err_out:
- return 0;
-}
-
-u8 mv64x60_is_coherent(void)
-{
- u32 v;
- void *devp;
-
- devp = finddevice("/");
- if (devp == NULL)
- return 1; /* Assume coherency on */
-
- if (getprop(devp, "coherency-off", &v, sizeof(v)) < 0)
- return 1; /* Coherency on */
- else
- return 0;
-}
diff --git a/arch/powerpc/boot/mv64x60.h b/arch/powerpc/boot/mv64x60.h
deleted file mode 100644
index b827105e6e54..000000000000
--- a/arch/powerpc/boot/mv64x60.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Author: Mark A. Greer <[email protected]>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PPC_BOOT_MV64x60_H_
-#define _PPC_BOOT_MV64x60_H_
-
-#define MV64x60_CPU_BAR_ENABLE 0x0278
-
-#define MV64x60_PCI_ACC_CNTL_ENABLE (1<<0)
-#define MV64x60_PCI_ACC_CNTL_REQ64 (1<<1)
-#define MV64x60_PCI_ACC_CNTL_SNOOP_NONE 0x00000000
-#define MV64x60_PCI_ACC_CNTL_SNOOP_WT 0x00000004
-#define MV64x60_PCI_ACC_CNTL_SNOOP_WB 0x00000008
-#define MV64x60_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c
-#define MV64x60_PCI_ACC_CNTL_ACCPROT (1<<4)
-#define MV64x60_PCI_ACC_CNTL_WRPROT (1<<5)
-#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE 0x00000000
-#define MV64x60_PCI_ACC_CNTL_SWAP_NONE 0x00000040
-#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080
-#define MV64x60_PCI_ACC_CNTL_SWAP_WORD 0x000000c0
-#define MV64x60_PCI_ACC_CNTL_SWAP_MASK 0x000000c0
-#define MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000
-#define MV64x60_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100
-#define MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200
-#define MV64x60_PCI_ACC_CNTL_MBURST_MASK 0x00000300
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00
-
-struct mv64x60_cpu2pci_win {
- u32 lo;
- u32 size;
- u32 remap_hi;
- u32 remap_lo;
-};
-
-extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2];
-extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2];
-
-u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
- u8 offset);
-void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
- u8 offset, u32 val);
-
-void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
- u8 is_coherent);
-void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
- u8 bus, u32 mem_size, u32 acc_bits);
-void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
- u32 pci_base_lo, u32 cpu_base, u32 size,
- struct mv64x60_cpu2pci_win *offset_tbl);
-u32 mv64x60_get_mem_size(u8 *bridge_base);
-u8 *mv64x60_get_bridge_pbase(void);
-u8 *mv64x60_get_bridge_base(void);
-u8 mv64x60_is_coherent(void);
-
-int mv64x60_i2c_open(void);
-int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
- u32 count);
-void mv64x60_i2c_close(void);
-
-#endif /* _PPC_BOOT_MV64x60_H_ */
--
2.16.2
Acked-by: Remi Machet <[email protected]>
-----Original Message-----
From: Mark Greer <[email protected]>
Sent: Thursday, April 5, 2018 9:17 PM
To: Benjamin Herrenschmidt <[email protected]>; Paul Mackerras
<[email protected]>; Michael Ellerman <[email protected]>
Cc: Remi Machet <[email protected]>; Dale Farnsworth <[email protected]>;
[email protected]; [email protected]; Mark Greer
<[email protected]>
Subject: [PATCH 1/5] powerpc/embedded6xx: Remove C2K board support
The C2K platform appears to be orphaned so remove code supporting it.
CC: Remi Machet <[email protected]>
Signed-off-by: Mark Greer <[email protected]>
---
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/cuboot-c2k.c | 189 --------------
arch/powerpc/boot/dts/c2k.dts | 366
--------------------------
arch/powerpc/configs/c2k_defconfig | 390
----------------------------
arch/powerpc/platforms/embedded6xx/Kconfig | 10 -
arch/powerpc/platforms/embedded6xx/Makefile | 1 -
arch/powerpc/platforms/embedded6xx/c2k.c | 148 -----------
7 files changed, 2 insertions(+), 1107 deletions(-) delete mode 100644
arch/powerpc/boot/cuboot-c2k.c delete mode 100644
arch/powerpc/boot/dts/c2k.dts delete mode 100644
arch/powerpc/configs/c2k_defconfig
delete mode 100644 arch/powerpc/platforms/embedded6xx/c2k.c
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index
26d5d2a5b8e9..70bf9b409fae 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -143,8 +143,8 @@ src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S
ep8248e.c cuboot-824x.c
src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
- cuboot-c2k.c gamecube-head.S \
- gamecube.c wii-head.S wii.c holly.c
\
+ gamecube-head.S gamecube.c \
+ wii-head.S wii.c holly.c \
fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
@@ -339,7 +339,6 @@ image-$(CONFIG_MVME7100) +=
dtbImage.mvme7100
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
-image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
image-$(CONFIG_MVME5100) += dtbImage.mvme5100
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
deleted file mode 100644 index 9309c51f1d65..000000000000
--- a/arch/powerpc/boot/cuboot-c2k.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * GEFanuc C2K platform code.
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "types.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "elf.h"
-#include "mv64x60.h"
-#include "cuboot.h"
-#include "ppcboot.h"
-
-static u8 *bridge_base;
-
-static void c2k_bridge_setup(u32 mem_size) -{
- u32 i, v[30], enables, acc_bits;
- u32 pci_base_hi, pci_base_lo, size, buf[2];
- unsigned long cpu_base;
- int rc;
- void *devp, *mv64x60_devp;
- u8 *bridge_pbase, is_coherent;
- struct mv64x60_cpu2pci_win *tbl;
- int bus;
-
- bridge_pbase = mv64x60_get_bridge_pbase();
- is_coherent = mv64x60_is_coherent();
-
- if (is_coherent)
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
- else
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
- mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
- mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (mv64x60_devp == NULL)
- fatal("Error: Missing marvell,mv64360 device tree
node\n\r");
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
- enables |= 0x007ffe00; /* Disable all cpu->pci windows */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = NULL;
- for (bus = 0; ; bus++) {
- char name[] = "pci ";
-
- name[strlen(name)-1] = bus+'0';
-
- devp = find_node_by_alias(name);
- if (devp == NULL)
- break;
-
- if (bus >= 2)
- fatal("Error: Only 2 PCI controllers are supported
at" \
- " this time.\n");
-
- mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus,
0,
- mem_size, acc_bits);
-
- rc = getprop(devp, "ranges", v, sizeof(v));
- if (rc == 0)
- fatal("Error: Can't find marvell,mv64360-pci ranges"
- " property\n\r");
-
- /* Get the cpu -> pci i/o & mem mappings from the device
tree */
-
- for (i = 0; i < rc; i += 6) {
- switch (v[i] & 0xff000000) {
- case 0x01000000: /* PCI I/O Space */
- tbl = mv64x60_cpu2pci_io;
- break;
- case 0x02000000: /* PCI MEM Space */
- tbl = mv64x60_cpu2pci_mem;
- break;
- default:
- continue;
- }
-
- pci_base_hi = v[i+1];
- pci_base_lo = v[i+2];
- cpu_base = v[i+3];
- size = v[i+5];
-
- buf[0] = cpu_base;
- buf[1] = size;
-
- if (!dt_xlate_addr(devp, buf, sizeof(buf),
&cpu_base))
- fatal("Error: Can't translate PCI address "
\
- "0x%x\n\r", (u32)cpu_base);
-
- mv64x60_config_cpu2pci_window(bridge_base, bus,
- pci_base_hi, pci_base_lo, cpu_base, size,
tbl);
- }
-
- enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
- cpu->pci<bus> mem0 */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
- enables);
- };
-}
-
-static void c2k_fixups(void)
-{
- u32 mem_size;
-
- mem_size = mv64x60_get_mem_size(bridge_base);
- c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
-}
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE_SET 0xf118
-
-static void c2k_reset(void)
-{
- u32 temp;
-
- udelay(5000000);
-
- if (bridge_base != 0) {
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
- temp = in_le32((u32 *)(bridge_base +
MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL),
temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
- temp = in_le32((u32 *)(bridge_base +
MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL),
temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
- 0x00080004);
- }
-
- for (;;);
-}
-
-static bd_t bd;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- CUBOOT_INIT();
-
- fdt_init(_dtb_start);
-
- bridge_base = mv64x60_get_bridge_base();
-
- platform_ops.fixups = c2k_fixups;
- platform_ops.exit = c2k_reset;
-
- if (serial_console_init() < 0)
- exit();
-}
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
deleted file mode 100644 index c5beb72d18b7..000000000000
--- a/arch/powerpc/boot/dts/c2k.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/* Device Tree Source for GEFanuc C2K
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.dts
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "C2K";
- compatible = "GEFanuc,C2K";
- coherency-off;
-
- aliases {
- pci0 = &PCI0;
- pci1 = &PCI1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "PowerPC,7447";
- reg = <0>;
- clock-frequency = <996000000>; /* 996 MHz */
- bus-frequency = <166666667>; /* 166.6666 MHz */
- timebase-frequency = <41666667>; /*
166.6666/4 MHz */
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <32768>;
- d-cache-size = <32768>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>; /* 1GB */
- };
-
- system-controller@d8000000 { /* Marvell Discovery */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64460";
- compatible = "marvell,mv64360";
- clock-frequency = <166666667>; /* 166.66... MHz */
- reg = <0xd8000000 0x00010000>;
- virtual-reg = <0xd8000000>;
- ranges = <0xd4000000 0xd4000000 0x01000000 /* PCI 0 I/O
Space */
- 0x80000000 0x80000000 0x08000000 /* PCI 0 MEM
Space */
- 0xd0000000 0xd0000000 0x01000000 /* PCI 1 I/O
Space */
- 0xa0000000 0xa0000000 0x08000000 /* PCI 1 MEM
Space */
- 0xd8100000 0xd8100000 0x00010000 /* FPGA */
- 0xd8110000 0xd8110000 0x00010000 /* FPGA
USARTs */
- 0xf8000000 0xf8000000 0x08000000 /* User
FLASH */
- 0x00000000 0xd8000000 0x00010000 /* Bridge's
regs */
- 0xd8140000 0xd8140000 0x00040000>; /*
Integrated SRAM */
-
- mdio@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
- reg = <0x2000 4>;
- PHY0: ethernet-phy@0 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <0>;
- };
- PHY1: ethernet-phy@1 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
- PHY2: ethernet-phy@2 {
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <2>;
- };
- };
-
- ethernet-group@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-group";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@1 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <1>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- phy = <&PHY1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@2 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <2>;
- interrupts = <34>;
- interrupt-parent = <&PIC>;
- phy = <&PHY2>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- SDMA0: sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xd8004000>;
- interrupt-base = <0>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
- SDMA1: sdma@6000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x6000 0xc18>;
- virtual-reg = <0xd8006000>;
- interrupt-base = <0>;
- interrupts = <38>;
- interrupt-parent = <&PIC>;
- };
-
- BRG0: brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- BRG1: brg@b208 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb208 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <115200>;
- };
-
- CUNIT: cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
- MPSCROUTING: mpscrouting@b400 {
- reg = <0xb400 0xc>;
- };
-
- MPSCINTR: mpscintr@b800 {
- reg = <0xb800 0x100>;
- virtual-reg = <0xd800b800>;
- };
-
- MPSC0: mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xd8008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
- MPSC1: mpsc@9000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x9000 0x38>;
- virtual-reg = <0xd8009000>;
- sdma = <&SDMA1>;
- brg = <&BRG1>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <1>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
-
- wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
- i2c@c000 {
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xd800c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
- PIC: pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0000 0x88>;
- interrupt-controller;
- };
-
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
- gpp@f100 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
- PCI0: pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0cf8 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0
0x01000000
- 0x02000000 0x0 0x80000000 0x80000000 0x0
0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0c34>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
- interrupt-map = <
- /* Only one interrupt line for PMC0 slot
(INTA) */
- 0x0000 0 0 1 &PIC 88
- >;
- };
-
-
- PCI1: pci@a0000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0x0c78 0x8>;
- ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0
0x01000000
- 0x02000000 0x0 0x80000000 0xa0000000 0x0
0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0x0cb4>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
- interrupt-map = <
- /* IDSEL 0x01: PMC1 ? */
- 0x0800 0 0 1 &PIC 88
- /* IDSEL 0x02: cPCI bridge */
- 0x1000 0 0 1 &PIC 88
- /* IDSEL 0x03: USB controller */
- 0x1800 0 0 1 &PIC 91
- /* IDSEL 0x04: SATA controller */
- 0x2000 0 0 1 &PIC 95
- >;
- };
-
- cpu-error@70 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x0070 0x10 0x0128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- sram-ctrl@380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x0380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0x0c28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1dc0 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1dc0 0x40 0x0ca8 0x4>;
- interrupts = <16>;
- interrupt-parent = <&PIC>;
- };
-
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
- /* Devices attached to the device controller */
- devicebus@45c {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "marvell,mv64306-devctrl";
- reg = <0x45C 0x88>;
- interrupts = <1>;
- interrupt-parent = <&PIC>;
- ranges = <0 0 0xd8100000 0x10000
- 2 0 0xd8110000 0x10000
- 4 0 0xf8000000 0x8000000>;
- fpga@0,0 {
- compatible = "sbs,fpga-c2k";
- reg = <0 0 0x10000>;
- };
- fpga_usart@2,0 {
- compatible = "sbs,fpga_usart-c2k";
- reg = <2 0 0x10000>;
- };
- nor_flash@4,0 {
- compatible = "cfi-flash";
- reg = <4 0 0x8000000>; /* 128MB */
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "boot";
- reg = <0x00000000 0x00080000>;
- };
- partition@40000 {
- label = "kernel";
- reg = <0x00080000 0x00400000>;
- };
- partition@440000 {
- label = "initrd";
- reg = <0x00480000 0x00B80000>;
- };
- partition@1000000 {
- label = "rootfs";
- reg = <0x01000000 0x06800000>;
- };
- partition@7800000 {
- label = "recovery";
- reg = <0x07800000 0x00800000>;
- read-only;
- };
- };
- };
- };
- chosen {
- stdout-path = &MPSC0;
- };
-};
diff --git a/arch/powerpc/configs/c2k_defconfig
b/arch/powerpc/configs/c2k_defconfig
deleted file mode 100644
index 4bb832a41d55..000000000000
--- a/arch/powerpc/configs/c2k_defconfig
+++ /dev/null
@@ -1,390 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_OSF_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_EMBEDDED6xx=y
-CONFIG_PPC_C2K=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_GEN_RTC=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set -CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m -CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m -CONFIG_IP_SCTP=m -CONFIG_ATM=m -CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_IND=y -CONFIG_BT=m -CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -# CONFIG_AIC7XXX_REG_PRETTY_PRINT
is not set -CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set -# CONFIG_AIC79XX_REG_PRETTY_PRINT
is not set -CONFIG_SCSI_ARCMSR=m -CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_NETCONSOLE=m
-CONFIG_TUN=m -# CONFIG_ATM_DRIVERS is not set -CONFIG_MV643XX_ETH=y
-CONFIG_VITESSE_PHY=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not
set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is
not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y -CONFIG_NVRAM=m -CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MV64XXX=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_SRP=m
-CONFIG_DMADEVICES=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig
b/arch/powerpc/platforms/embedded6xx/Kconfig
index 9fb2d5912c5a..8ea16db5ff48 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -48,16 +48,6 @@ config PPC_HOLLY
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
-config PPC_C2K
- bool "SBS/GEFanuc C2K board"
- depends on EMBEDDED6xx
- select MV64X60
- select NOT_COHERENT_CACHE
- select MTD_CFI_I4
- help
- This option enables support for the GE Fanuc C2K board (formerly
- an SBS board).
-
config MVME5100
bool "Motorola/Emerson MVME5100"
depends on EMBEDDED6xx
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile
b/arch/powerpc/platforms/embedded6xx/Makefile
index 12154e3257ad..e656ae9f23c6 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
obj-$(CONFIG_STORCENTER) += storcenter.o
obj-$(CONFIG_PPC_HOLLY) += holly.o
-obj-$(CONFIG_PPC_C2K) += c2k.o
obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c
b/arch/powerpc/platforms/embedded6xx/c2k.c
deleted file mode 100644
index d19e4e759597..000000000000
--- a/arch/powerpc/platforms/embedded6xx/c2k.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Board setup routines for the GEFanuc C2K board
- *
- * Author: Remi Machet <[email protected]>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/seq_file.h>
-#include <linux/time.h>
-#include <linux/of.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-
-#include <mm/mmu_decl.h>
-
-#include <sysdev/mv64x60.h>
-
-#define MV64x60_MPP_CNTL_0 0x0000
-#define MV64x60_MPP_CNTL_2 0x0008
-
-#define MV64x60_GPP_IO_CNTL 0x0000
-#define MV64x60_GPP_LEVEL_CNTL 0x0010
-#define MV64x60_GPP_VALUE_SET 0x0018
-
-static void __iomem *mv64x60_mpp_reg_base; -static void __iomem
*mv64x60_gpp_reg_base;
-
-static void __init c2k_setup_arch(void) -{
- struct device_node *np;
- phys_addr_t paddr;
- const unsigned int *reg;
-
- /*
- * ioremap mpp and gpp registers in case they are later
- * needed by c2k_reset_board().
- */
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
-
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
- reg = of_get_property(np, "reg", NULL);
- paddr = of_translate_address(np, reg);
- of_node_put(np);
- mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
-
-#ifdef CONFIG_PCI
- mv64x60_pci_init();
-#endif
-}
-
-static void c2k_reset_board(void)
-{
- u32 temp;
-
- local_irq_disable();
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00000004;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
- temp &= 0xFFFF0FFF;
- out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
-
- temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
- temp |= 0x00080000;
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
-
- out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
-}
-
-static void __noreturn c2k_restart(char *cmd) -{
- c2k_reset_board();
- msleep(100);
- panic("restart failed\n");
-}
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-#define COHERENCY_SETTING "off"
-#else
-#define COHERENCY_SETTING "on"
-#endif
-
-void c2k_show_cpuinfo(struct seq_file *m) -{
- seq_printf(m, "Vendor\t\t: GEFanuc\n");
- seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
-}
-
-/*
- * Called very early, device-tree isn't unflattened
- */
-static int __init c2k_probe(void)
-{
- if (!of_machine_is_compatible("GEFanuc,C2K"))
- return 0;
-
- printk(KERN_INFO "Detected a GEFanuc C2K board\n");
-
- _set_L2CR(0);
- _set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
-
- mv64x60_init_early();
-
- return 1;
-}
-
-define_machine(c2k) {
- .name = "C2K",
- .probe = c2k_probe,
- .setup_arch = c2k_setup_arch,
- .show_cpuinfo = c2k_show_cpuinfo,
- .init_IRQ = mv64x60_init_irq,
- .get_irq = mv64x60_get_irq,
- .restart = c2k_restart,
- .calibrate_decr = generic_calibrate_decr,
-};
--
2.16.2
Hi Mark,
I love your patch! Perhaps something to improve:
[auto build test WARNING on powerpc/next]
[cannot apply to v4.16 next-20180406]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Mark-Greer/powerpc-Remove-support-for-Marvell-mv64x60-hostbridges/20180406-204320
base: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git next
config: powerpc-amigaone_defconfig (attached as .config)
compiler: powerpc-linux-gnu-gcc (Debian 7.2.0-11) 7.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
make.cross ARCH=powerpc
All warnings (new ones prefixed by >>):
warning: (AMIGAONE) selects NOT_COHERENT_CACHE which has unmet direct dependencies (4xx || PPC_8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON)
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
On Fri, 2018-04-06 at 01:17:16 UTC, Mark Greer wrote:
> The C2K platform appears to be orphaned so remove code supporting it.
>
> CC: Remi Machet <[email protected]>
> Signed-off-by: Mark Greer <[email protected]>
> Acked-by: Remi Machet <[email protected]>
> Signed-off-by: Mark Greer <[email protected]>
Series applied to powerpc next, thanks.
https://git.kernel.org/powerpc/c/92c8c16f345759e87c5d5b771d438f
cheers
On Tue, Jun 05, 2018 at 12:10:31AM +1000, Michael Ellerman wrote:
> On Fri, 2018-04-06 at 01:17:16 UTC, Mark Greer wrote:
> > The C2K platform appears to be orphaned so remove code supporting it.
> >
> > CC: Remi Machet <[email protected]>
> > Signed-off-by: Mark Greer <[email protected]>
> > Acked-by: Remi Machet <[email protected]>
> > Signed-off-by: Mark Greer <[email protected]>
>
> Series applied to powerpc next, thanks.
>
> https://git.kernel.org/powerpc/c/92c8c16f345759e87c5d5b771d438f
Thanks Michael.
Mark
--