The EC/ACPI firmware on Lenovo ThinkPads used to report a status
of "Unknown" when the battery is between the charge start and charge
stop thresholds. On Windows, it reports "Not Charging" so the quirk
has been added to fix the "Unknown" state.
The chosen new state when the battery is not charging is "Fully Charged"
because a status of "Not Charging" breaks almost all applications in
userspace that depend on upower, because upower in itself can't handle
a state of "Not Charging", defaulting to "Unknown".
When we report "Fully Charged" instead of "Unknown", the userspace handles
everything just fine, displaying for example: "Fully Charged, 59%" in Xfce.
This is a re-write of: https://patchwork.kernel.org/patch/10205359/
Signed-off-by: Ognjen Galic <[email protected]>
---
drivers/acpi/battery.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index bdb24d63..cb4457a7 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -74,6 +74,7 @@ static async_cookie_t async_cookie;
static bool battery_driver_registered;
static int battery_bix_broken_package;
static int battery_notification_delay_ms;
+static int battery_quirk_thinkpad_full;
static unsigned int cache_time = 1000;
module_param(cache_time, uint, 0644);
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -233,7 +234,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
- else if (acpi_battery_is_charged(battery))
+ else if (acpi_battery_is_charged(battery) ||
+ battery_quirk_thinkpad_full)
val->intval = POWER_SUPPLY_STATUS_FULL;
else
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
@@ -1332,6 +1334,13 @@ battery_notification_delay_quirk(const struct dmi_system_id *d)
return 0;
}
+static int __init
+battery_thinkpad_full_charged_quirk(const struct dmi_system_id *d)
+{
+ battery_quirk_thinkpad_full = 1;
+ return 0;
+}
+
static const struct dmi_system_id bat_dmi_table[] __initconst = {
{
.callback = battery_bix_broken_package_quirk,
@@ -1349,6 +1358,14 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"),
},
},
+ {
+ .callback = battery_thinkpad_full_charged_quirk,
+ .ident = "Lenovo ThinkPad",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
+ },
+ },
{},
};
--
2.15.1
Hi,
On Tue, Apr 10, 2018 at 11:06:43AM +0200, Ognjen Galic wrote:
> The EC/ACPI firmware on Lenovo ThinkPads used to report a status
> of "Unknown" when the battery is between the charge start and charge
> stop thresholds. On Windows, it reports "Not Charging" so the quirk
> has been added to fix the "Unknown" state.
>
> The chosen new state when the battery is not charging is "Fully Charged"
> because a status of "Not Charging" breaks almost all applications in
> userspace that depend on upower, because upower in itself can't handle
> a state of "Not Charging", defaulting to "Unknown".
>
> When we report "Fully Charged" instead of "Unknown", the userspace handles
> everything just fine, displaying for example: "Fully Charged, 59%" in Xfce.
This probably breaks dual-battery Thinkpads, that charges batteries
alternating (so one of them is "not charging" without being "fully
charged"). The correct fix is to teach upower the "not charging"
state. It exists since the existance of the power supply kernel API,
so missing support is a bug in UPower.
-- Sebastian
> This is a re-write of: https://patchwork.kernel.org/patch/10205359/
>
> Signed-off-by: Ognjen Galic <[email protected]>
> ---
> drivers/acpi/battery.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
> index bdb24d63..cb4457a7 100644
> --- a/drivers/acpi/battery.c
> +++ b/drivers/acpi/battery.c
> @@ -74,6 +74,7 @@ static async_cookie_t async_cookie;
> static bool battery_driver_registered;
> static int battery_bix_broken_package;
> static int battery_notification_delay_ms;
> +static int battery_quirk_thinkpad_full;
> static unsigned int cache_time = 1000;
> module_param(cache_time, uint, 0644);
> MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
> @@ -233,7 +234,8 @@ static int acpi_battery_get_property(struct power_supply *psy,
> val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
> val->intval = POWER_SUPPLY_STATUS_CHARGING;
> - else if (acpi_battery_is_charged(battery))
> + else if (acpi_battery_is_charged(battery) ||
> + battery_quirk_thinkpad_full)
> val->intval = POWER_SUPPLY_STATUS_FULL;
> else
> val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> @@ -1332,6 +1334,13 @@ battery_notification_delay_quirk(const struct dmi_system_id *d)
> return 0;
> }
>
> +static int __init
> +battery_thinkpad_full_charged_quirk(const struct dmi_system_id *d)
> +{
> + battery_quirk_thinkpad_full = 1;
> + return 0;
> +}
> +
> static const struct dmi_system_id bat_dmi_table[] __initconst = {
> {
> .callback = battery_bix_broken_package_quirk,
> @@ -1349,6 +1358,14 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
> DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"),
> },
> },
> + {
> + .callback = battery_thinkpad_full_charged_quirk,
> + .ident = "Lenovo ThinkPad",
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
> + },
> + },
> {},
> };
>
> --
> 2.15.1
>
On April 10, 2018 12:58:41 PM GMT+02:00, Sebastian Reichel <[email protected]> wrote:
>Hi,
>
>On Tue, Apr 10, 2018 at 11:06:43AM +0200, Ognjen Galic wrote:
>> The EC/ACPI firmware on Lenovo ThinkPads used to report a status
>> of "Unknown" when the battery is between the charge start and charge
>> stop thresholds. On Windows, it reports "Not Charging" so the quirk
>> has been added to fix the "Unknown" state.
>>
>> The chosen new state when the battery is not charging is "Fully
>Charged"
>> because a status of "Not Charging" breaks almost all applications in
>> userspace that depend on upower, because upower in itself can't
>handle
>> a state of "Not Charging", defaulting to "Unknown".
>>
>> When we report "Fully Charged" instead of "Unknown", the userspace
>handles
>> everything just fine, displaying for example: "Fully Charged, 59%" in
>Xfce.
>
>This probably breaks dual-battery Thinkpads, that charges batteries
>alternating (so one of them is "not charging" without being "fully
>charged"). The correct fix is to teach upower the "not charging"
>state. It exists since the existance of the power supply kernel API,
>so missing support is a bug in UPower.
I did write a patch for upower, submitted it and tested it. The problem is the bug report has been open for a month now and nothing major is happening. And the userspace is still broken.
>
>-- Sebastian
>
>> This is a re-write of: https://patchwork.kernel.org/patch/10205359/
>>
>> Signed-off-by: Ognjen Galic <[email protected]>
>> ---
>> drivers/acpi/battery.c | 19 ++++++++++++++++++-
>> 1 file changed, 18 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
>> index bdb24d63..cb4457a7 100644
>> --- a/drivers/acpi/battery.c
>> +++ b/drivers/acpi/battery.c
>> @@ -74,6 +74,7 @@ static async_cookie_t async_cookie;
>> static bool battery_driver_registered;
>> static int battery_bix_broken_package;
>> static int battery_notification_delay_ms;
>> +static int battery_quirk_thinkpad_full;
>> static unsigned int cache_time = 1000;
>> module_param(cache_time, uint, 0644);
>> MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
>> @@ -233,7 +234,8 @@ static int acpi_battery_get_property(struct
>power_supply *psy,
>> val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
>> else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
>> val->intval = POWER_SUPPLY_STATUS_CHARGING;
>> - else if (acpi_battery_is_charged(battery))
>> + else if (acpi_battery_is_charged(battery) ||
>> + battery_quirk_thinkpad_full)
>> val->intval = POWER_SUPPLY_STATUS_FULL;
>> else
>> val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
>> @@ -1332,6 +1334,13 @@ battery_notification_delay_quirk(const struct
>dmi_system_id *d)
>> return 0;
>> }
>>
>> +static int __init
>> +battery_thinkpad_full_charged_quirk(const struct dmi_system_id *d)
>> +{
>> + battery_quirk_thinkpad_full = 1;
>> + return 0;
>> +}
>> +
>> static const struct dmi_system_id bat_dmi_table[] __initconst = {
>> {
>> .callback = battery_bix_broken_package_quirk,
>> @@ -1349,6 +1358,14 @@ static const struct dmi_system_id
>bat_dmi_table[] __initconst = {
>> DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"),
>> },
>> },
>> + {
>> + .callback = battery_thinkpad_full_charged_quirk,
>> + .ident = "Lenovo ThinkPad",
>> + .matches = {
>> + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
>> + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"),
>> + },
>> + },
>> {},
>> };
>>
>> --
>> 2.15.1
>>
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.