Whack-a-mole some more occurrences of status in examples.
Cc: Vinod Koul <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Brian Norris <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Tanmay Inamdar <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Rodolfo Giometti <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
7 files changed, 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
index 23f8d712c3ce..4945aeac4dc4 100644
--- a/Documentation/devicetree/bindings/dma/k3dma.txt
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -23,7 +23,6 @@ Controller:
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
- status = "disable";
};
Client:
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 66026dcf53e1..3f15f6644527 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
power-domains = <&k2g_pds 0xb>;
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
clock-names = "fck", "mmchsdb_fck";
- status = "disabled";
};
------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index a086f1e1cdd7..7f0822b4beae 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
- status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
@@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3C 4>;
- status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 2d5287eeed95..634bb66fc49c 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
- status = "disabled";
};
sdhi1: sd@ee120000 {
@@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
- status = "disabled";
};
sdhi2: sd@ee140000 {
@@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
- status = "disabled";
};
sdhi3: sd@ee160000 {
@@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 1c88526dedfc..c5ba6a4ba1f2 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -20,7 +20,6 @@ Required NFI properties:
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
- clock-names: NFI clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
- ecc-engine: Required ECC Engine node.
- #address-cells: NAND chip index, should be 1.
- #size-cells: Should be 0.
@@ -34,7 +33,6 @@ Example:
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
- status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
@@ -152,7 +150,6 @@ Required BCH properties:
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
- clock-names: ECC clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
Example:
@@ -162,5 +159,4 @@ Example:
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 6fd2decfa66c..92490330dc1c 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -25,8 +25,6 @@ Optional properties:
Example:
-SoC-specific DT Entry:
-
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
@@ -50,8 +48,3 @@ SoC-specific DT Entry:
clocks = <&pcie0clk 0>;
};
-
-Board-specific DT Entry:
- &pcie0 {
- status = "ok";
- };
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
index 0de23b793657..3683874832ae 100644
--- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
@@ -20,5 +20,4 @@ Example:
assert-falling-edge;
compatible = "pps-gpio";
- status = "okay";
};
--
2.14.1
On Tue, Apr 17, 2018 at 08:57:32AM -0500, Rob Herring wrote:
> Whack-a-mole some more occurrences of status in examples.
>
> Cc: Vinod Koul <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: Ralf Baechle <[email protected]>
> Cc: James Hogan <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: David Woodhouse <[email protected]>
> Cc: Brian Norris <[email protected]>
> Cc: Boris Brezillon <[email protected]>
> Cc: Marek Vasut <[email protected]>
> Cc: Richard Weinberger <[email protected]>
> Cc: Matthias Brugger <[email protected]>
> Cc: Tanmay Inamdar <[email protected]>
> Cc: Bjorn Helgaas <[email protected]>
> Cc: Rodolfo Giometti <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
> Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
These:
Acked-By: Vinod Koul <[email protected]>
--
~Vinod
On 17 April 2018 at 15:57, Rob Herring <[email protected]> wrote:
> Whack-a-mole some more occurrences of status in examples.
>
> Cc: Vinod Koul <[email protected]>
> Cc: Mark Rutland <[email protected]>
> Cc: Ralf Baechle <[email protected]>
> Cc: James Hogan <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: David Woodhouse <[email protected]>
> Cc: Brian Norris <[email protected]>
> Cc: Boris Brezillon <[email protected]>
> Cc: Marek Vasut <[email protected]>
> Cc: Richard Weinberger <[email protected]>
> Cc: Matthias Brugger <[email protected]>
> Cc: Tanmay Inamdar <[email protected]>
> Cc: Bjorn Helgaas <[email protected]>
> Cc: Rodolfo Giometti <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
> Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
> Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
> Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
> Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
> Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
> Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
> 7 files changed, 20 deletions(-)
For mmc:
Acked-by: Ulf Hansson <[email protected]>
Kind regards
Uffe
>
> diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
> index 23f8d712c3ce..4945aeac4dc4 100644
> --- a/Documentation/devicetree/bindings/dma/k3dma.txt
> +++ b/Documentation/devicetree/bindings/dma/k3dma.txt
> @@ -23,7 +23,6 @@ Controller:
> dma-requests = <27>;
> interrupts = <0 12 4>;
> clocks = <&pclk>;
> - status = "disable";
> };
>
> Client:
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 66026dcf53e1..3f15f6644527 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
> power-domains = <&k2g_pds 0xb>;
> clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
> clock-names = "fck", "mmchsdb_fck";
> - status = "disabled";
> };
>
> ------------------------------------------------------------------------------
> diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> index a086f1e1cdd7..7f0822b4beae 100644
> --- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> @@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy0: usb2-phy@18 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x18 4>, <0x38 4>;
> - status = "disabled";
>
> resets = <&reset1 4 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> @@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy1: usb2-phy@34 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x34 4>, <0x3C 4>;
> - status = "disabled";
>
> resets = <&reset1 5 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> index 2d5287eeed95..634bb66fc49c 100644
> --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> @@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 314>;
> - status = "disabled";
> };
>
> sdhi1: sd@ee120000 {
> @@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 313>;
> - status = "disabled";
> };
>
> sdhi2: sd@ee140000 {
> @@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 312>;
> - status = "disabled";
> };
>
> sdhi3: sd@ee160000 {
> @@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 311>;
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> index 1c88526dedfc..c5ba6a4ba1f2 100644
> --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> @@ -20,7 +20,6 @@ Required NFI properties:
> - interrupts: Interrupts of NFI.
> - clocks: NFI required clocks.
> - clock-names: NFI clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
> - ecc-engine: Required ECC Engine node.
> - #address-cells: NAND chip index, should be 1.
> - #size-cells: Should be 0.
> @@ -34,7 +33,6 @@ Example:
> clocks = <&pericfg CLK_PERI_NFI>,
> <&pericfg CLK_PERI_NFI_PAD>;
> clock-names = "nfi_clk", "pad_clk";
> - status = "disabled";
> ecc-engine = <&bch>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -152,7 +150,6 @@ Required BCH properties:
> - interrupts: Interrupts of ECC.
> - clocks: ECC required clocks.
> - clock-names: ECC clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
>
> Example:
>
> @@ -162,5 +159,4 @@ Example:
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_NFI_ECC>;
> clock-names = "nfiecc_clk";
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> index 6fd2decfa66c..92490330dc1c 100644
> --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> @@ -25,8 +25,6 @@ Optional properties:
>
> Example:
>
> -SoC-specific DT Entry:
> -
> pcie0: pcie@1f2b0000 {
> status = "disabled";
> device_type = "pci";
> @@ -50,8 +48,3 @@ SoC-specific DT Entry:
> clocks = <&pcie0clk 0>;
> };
>
> -
> -Board-specific DT Entry:
> - &pcie0 {
> - status = "ok";
> - };
> diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> index 0de23b793657..3683874832ae 100644
> --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
> +++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> @@ -20,5 +20,4 @@ Example:
> assert-falling-edge;
>
> compatible = "pps-gpio";
> - status = "okay";
> };
> --
> 2.14.1
>