From: Rafał Miłecki <[email protected]>
This adds support for detecting this model board and registers some LEDs
and buttons.
There are two uncommon things regarding this device:
1) It can use two different "board_id" ID values.
Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
in firmware file header. There are two reports (one from an OpenWrt
user) of a different "U12H139T50_NETGEAR" magic though.
2) Power LEDs share GPIOs with buttons.
Amber one seems to share GPIO 2 with WPS button and green one seems
to share GPIO 3 with reset button. It remains unknown how to support
them and handle buttons at the same time. For that reason they aren't
added to the list of supported LEDs.
Signed-off-by: Rafał Miłecki <[email protected]>
---
arch/mips/bcm47xx/board.c | 2 ++
arch/mips/bcm47xx/buttons.c | 9 +++++++++
arch/mips/bcm47xx/leds.c | 9 +++++++++
arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h | 1 +
4 files changed, 21 insertions(+)
diff --git a/arch/mips/bcm47xx/board.c b/arch/mips/bcm47xx/board.c
index edfaef0d73a4..a80910d2738c 100644
--- a/arch/mips/bcm47xx/board.c
+++ b/arch/mips/bcm47xx/board.c
@@ -172,6 +172,8 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
+ {{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c
index 88d400d256c4..977990a609ba 100644
--- a/arch/mips/bcm47xx/buttons.c
+++ b/arch/mips/bcm47xx/buttons.c
@@ -412,6 +412,12 @@ bcm47xx_buttons_netgear_wndr4500v1[] __initconst = {
};
static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr1000_v3[] __initconst = {
+ BCM47XX_GPIO_KEY(2, KEY_WPS_BUTTON),
+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
bcm47xx_buttons_netgear_wnr3500lv1[] __initconst = {
BCM47XX_GPIO_KEY(4, KEY_RESTART),
BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
@@ -670,6 +676,9 @@ int __init bcm47xx_buttons_register(void)
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr1000_v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR3500L:
err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr3500lv1);
break;
diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c
index 34a7b3fbdfd9..3fe015602945 100644
--- a/arch/mips/bcm47xx/leds.c
+++ b/arch/mips/bcm47xx/leds.c
@@ -498,6 +498,12 @@ bcm47xx_leds_netgear_wndr4500v1[] __initconst = {
};
static const struct gpio_led
+bcm47xx_leds_netgear_wnr1000_v3[] __initconst = {
+ BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+ BCM47XX_GPIO_LED(1, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
bcm47xx_leds_netgear_wnr3500lv1[] __initconst = {
BCM47XX_GPIO_LED(0, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
@@ -758,6 +764,9 @@ void __init bcm47xx_leds_register(void)
case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
break;
+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
+ bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr1000_v3);
+ break;
case BCM47XX_BOARD_NETGEAR_WNR3500L:
bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr3500lv1);
break;
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
index cbf9da7f2f94..0ef8893e07f8 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
@@ -110,6 +110,7 @@ enum bcm47xx_board {
BCM47XX_BOARD_NETGEAR_WNDR4000,
BCM47XX_BOARD_NETGEAR_WNDR4500V1,
BCM47XX_BOARD_NETGEAR_WNDR4500V2,
+ BCM47XX_BOARD_NETGEAR_WNR1000_V3,
BCM47XX_BOARD_NETGEAR_WNR2000,
BCM47XX_BOARD_NETGEAR_WNR3500L,
BCM47XX_BOARD_NETGEAR_WNR3500U,
--
2.11.0
From: Rafał Miłecki <[email protected]>
Some old devices with 4 MiB flashes were using 0x1000 block size and
could use smaller (0x6000 bytes) flash partition for storing NVRAM
content. This adds support for reading NVRAM on Netgear WNR1000 V3.
Signed-off-by: Rafał Miłecki <[email protected]>
---
drivers/firmware/broadcom/bcm47xx_nvram.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c
index 0b631e5b5b84..d25f080fcb0d 100644
--- a/drivers/firmware/broadcom/bcm47xx_nvram.c
+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
@@ -36,7 +36,7 @@ struct nvram_header {
static char nvram_buf[NVRAM_SPACE];
static size_t nvram_len;
-static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
+static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
static u32 find_nvram_size(void __iomem *end)
{
--
2.11.0
On Sun, Apr 08, 2018 at 10:57:32PM +0200, Rafał Miłecki wrote:
> From: Rafał Miłecki <[email protected]>
>
> This adds support for detecting this model board and registers some LEDs
> and buttons.
>
> There are two uncommon things regarding this device:
> 1) It can use two different "board_id" ID values.
> Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used
> in firmware file header. There are two reports (one from an OpenWrt
> user) of a different "U12H139T50_NETGEAR" magic though.
> 2) Power LEDs share GPIOs with buttons.
> Amber one seems to share GPIO 2 with WPS button and green one seems
> to share GPIO 3 with reset button. It remains unknown how to support
> them and handle buttons at the same time. For that reason they aren't
> added to the list of supported LEDs.
>
> Signed-off-by: Rafał Miłecki <[email protected]>
Thanks, both applied for 4.18.
Cheers
James