Fixes to some of the bugs found during system test, internal review
and clean-up
Yunsheng Lin (4):
net: hns3: Fix for setting mac address when resetting
net: hns3: remove add/del_tunnel_udp in hns3_enet module
net: hns3: fix for cleaning ring problem
net: hns3: refactor the loopback related function
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 7 --
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 131 ++++++---------------
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 21 ++--
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 68 +++++------
4 files changed, 76 insertions(+), 151 deletions(-)
--
2.7.4
From: Yunsheng Lin <[email protected]>
When hns3_init_mac_addr is called during reset process, it will
get the mac address from NCL_CONFIG and set it to hardware. If
user has changed the mac address, then the mac address set by
user is lost during resetting.
This patch fixes it by not getting the mac address from NCL_CONFIG
when resetting.
Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 729bcab..a55c8f515 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3046,13 +3046,13 @@ int hns3_uninit_all_ring(struct hns3_nic_priv *priv)
}
/* Set mac addr if it is configured. or leave it to the AE driver */
-static void hns3_init_mac_addr(struct net_device *netdev)
+static void hns3_init_mac_addr(struct net_device *netdev, bool init)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
struct hnae3_handle *h = priv->ae_handle;
u8 mac_addr_temp[ETH_ALEN];
- if (h->ae_algo->ops->get_mac_addr) {
+ if (h->ae_algo->ops->get_mac_addr && init) {
h->ae_algo->ops->get_mac_addr(h, mac_addr_temp);
ether_addr_copy(netdev->dev_addr, mac_addr_temp);
}
@@ -3106,7 +3106,7 @@ static int hns3_client_init(struct hnae3_handle *handle)
handle->kinfo.netdev = netdev;
handle->priv = (void *)priv;
- hns3_init_mac_addr(netdev);
+ hns3_init_mac_addr(netdev, true);
hns3_set_default_feature(netdev);
@@ -3353,7 +3353,7 @@ static int hns3_reset_notify_init_enet(struct hnae3_handle *handle)
struct hns3_nic_priv *priv = netdev_priv(netdev);
int ret;
- hns3_init_mac_addr(netdev);
+ hns3_init_mac_addr(netdev, false);
hns3_nic_set_rx_mode(netdev);
hns3_recover_hw_addr(netdev);
--
2.7.4
From: Yunsheng Lin <[email protected]>
The add/del_tunnel_udp is not implemented in hclge_main moulde,
the NETIF_F_RX_UDP_TUNNEL_PORT feature bit is added automatically
by stack when ndo_udp_tunnel_add is not null in dev->netdev_ops.
This patch removes the add/del_tunnel_udp related function, for
we do not support this feature now.
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 7 --
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 89 -------------------------
2 files changed, 96 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
index 37ec1b3..804ea83 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h
@@ -273,10 +273,6 @@ struct hnae3_ae_dev {
* Map rings to vector
* unmap_ring_from_vector()
* Unmap rings from vector
- * add_tunnel_udp()
- * Add tunnel information to hardware
- * del_tunnel_udp()
- * Delete tunnel information from hardware
* reset_queue()
* Reset queue
* get_fw_version()
@@ -388,9 +384,6 @@ struct hnae3_ae_ops {
int vector_num,
struct hnae3_ring_chain_node *vr_chain);
- int (*add_tunnel_udp)(struct hnae3_handle *handle, u16 port_num);
- int (*del_tunnel_udp)(struct hnae3_handle *handle, u16 port_num);
-
void (*reset_queue)(struct hnae3_handle *handle, u16 queue_id);
u32 (*get_fw_version)(struct hnae3_handle *handle);
void (*get_mdix_mode)(struct hnae3_handle *handle,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index a55c8f515..bd8e14b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1244,93 +1244,6 @@ static void hns3_nic_get_stats64(struct net_device *netdev,
stats->tx_compressed = netdev->stats.tx_compressed;
}
-static void hns3_add_tunnel_port(struct net_device *netdev, u16 port,
- enum hns3_udp_tnl_type type)
-{
- struct hns3_nic_priv *priv = netdev_priv(netdev);
- struct hns3_udp_tunnel *udp_tnl = &priv->udp_tnl[type];
- struct hnae3_handle *h = priv->ae_handle;
-
- if (udp_tnl->used && udp_tnl->dst_port == port) {
- udp_tnl->used++;
- return;
- }
-
- if (udp_tnl->used) {
- netdev_warn(netdev,
- "UDP tunnel [%d], port [%d] offload\n", type, port);
- return;
- }
-
- udp_tnl->dst_port = port;
- udp_tnl->used = 1;
- /* TBD send command to hardware to add port */
- if (h->ae_algo->ops->add_tunnel_udp)
- h->ae_algo->ops->add_tunnel_udp(h, port);
-}
-
-static void hns3_del_tunnel_port(struct net_device *netdev, u16 port,
- enum hns3_udp_tnl_type type)
-{
- struct hns3_nic_priv *priv = netdev_priv(netdev);
- struct hns3_udp_tunnel *udp_tnl = &priv->udp_tnl[type];
- struct hnae3_handle *h = priv->ae_handle;
-
- if (!udp_tnl->used || udp_tnl->dst_port != port) {
- netdev_warn(netdev,
- "Invalid UDP tunnel port %d\n", port);
- return;
- }
-
- udp_tnl->used--;
- if (udp_tnl->used)
- return;
-
- udp_tnl->dst_port = 0;
- /* TBD send command to hardware to del port */
- if (h->ae_algo->ops->del_tunnel_udp)
- h->ae_algo->ops->del_tunnel_udp(h, port);
-}
-
-/* hns3_nic_udp_tunnel_add - Get notifiacetion about UDP tunnel ports
- * @netdev: This physical ports's netdev
- * @ti: Tunnel information
- */
-static void hns3_nic_udp_tunnel_add(struct net_device *netdev,
- struct udp_tunnel_info *ti)
-{
- u16 port_n = ntohs(ti->port);
-
- switch (ti->type) {
- case UDP_TUNNEL_TYPE_VXLAN:
- hns3_add_tunnel_port(netdev, port_n, HNS3_UDP_TNL_VXLAN);
- break;
- case UDP_TUNNEL_TYPE_GENEVE:
- hns3_add_tunnel_port(netdev, port_n, HNS3_UDP_TNL_GENEVE);
- break;
- default:
- netdev_err(netdev, "unsupported tunnel type %d\n", ti->type);
- break;
- }
-}
-
-static void hns3_nic_udp_tunnel_del(struct net_device *netdev,
- struct udp_tunnel_info *ti)
-{
- u16 port_n = ntohs(ti->port);
-
- switch (ti->type) {
- case UDP_TUNNEL_TYPE_VXLAN:
- hns3_del_tunnel_port(netdev, port_n, HNS3_UDP_TNL_VXLAN);
- break;
- case UDP_TUNNEL_TYPE_GENEVE:
- hns3_del_tunnel_port(netdev, port_n, HNS3_UDP_TNL_GENEVE);
- break;
- default:
- break;
- }
-}
-
static int hns3_setup_tc(struct net_device *netdev, void *type_data)
{
struct tc_mqprio_qopt_offload *mqprio_qopt = type_data;
@@ -1569,8 +1482,6 @@ static const struct net_device_ops hns3_nic_netdev_ops = {
.ndo_get_stats64 = hns3_nic_get_stats64,
.ndo_setup_tc = hns3_nic_setup_tc,
.ndo_set_rx_mode = hns3_nic_set_rx_mode,
- .ndo_udp_tunnel_add = hns3_nic_udp_tunnel_add,
- .ndo_udp_tunnel_del = hns3_nic_udp_tunnel_del,
.ndo_vlan_rx_add_vid = hns3_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = hns3_vlan_rx_kill_vid,
.ndo_set_vf_vlan = hns3_ndo_set_vf_vlan,
--
2.7.4
From: Yunsheng Lin <[email protected]>
The head or tail in hardware is not longer valid when resetting,
current hns3_clear_all_ring use them to clean the ring, which
will cause problem during resetting.
This patch fixes it by using next_to_use and next_to_clean in
the ring struct.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 34 ++++++++++++++++++++++---
1 file changed, 30 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index bd8e14b..4031174 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -3203,9 +3203,35 @@ static void hns3_recover_hw_addr(struct net_device *ndev)
hns3_nic_mc_sync(ndev, ha->addr);
}
-static void hns3_drop_skb_data(struct hns3_enet_ring *ring, struct sk_buff *skb)
+static void hns3_clear_tx_ring(struct hns3_enet_ring *ring)
{
- dev_kfree_skb_any(skb);
+ if (!HNAE3_IS_TX_RING(ring))
+ return;
+
+ while (ring->next_to_clean != ring->next_to_use) {
+ hns3_free_buffer_detach(ring, ring->next_to_clean);
+ ring_ptr_move_fw(ring, next_to_clean);
+ }
+}
+
+static void hns3_clear_rx_ring(struct hns3_enet_ring *ring)
+{
+ if (HNAE3_IS_TX_RING(ring))
+ return;
+
+ while (ring->next_to_use != ring->next_to_clean) {
+ /* When a buffer is not reused, it's memory has been
+ * freed in hns3_handle_rx_bd or will be freed by
+ * stack, so only need to unmap the buffer here.
+ */
+ if (!ring->desc_cb[ring->next_to_use].reuse_flag) {
+ hns3_unmap_buffer(ring,
+ &ring->desc_cb[ring->next_to_use]);
+ ring->desc_cb[ring->next_to_use].dma = 0;
+ }
+
+ ring_ptr_move_fw(ring, next_to_use);
+ }
}
static void hns3_clear_all_ring(struct hnae3_handle *h)
@@ -3219,13 +3245,13 @@ static void hns3_clear_all_ring(struct hnae3_handle *h)
struct hns3_enet_ring *ring;
ring = priv->ring_data[i].ring;
- hns3_clean_tx_ring(ring, ring->desc_num);
+ hns3_clear_tx_ring(ring);
dev_queue = netdev_get_tx_queue(ndev,
priv->ring_data[i].queue_index);
netdev_tx_reset_queue(dev_queue);
ring = priv->ring_data[i + h->kinfo.num_tqps].ring;
- hns3_clean_rx_ring(ring, ring->desc_num, hns3_drop_skb_data);
+ hns3_clear_rx_ring(ring);
}
}
--
2.7.4
From: Yunsheng Lin <[email protected]>
This patch refactors the loopback related function in order
to support the serdes loopback.
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 21 +++----
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 68 +++++++++++-----------
2 files changed, 42 insertions(+), 47 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index eb3c34f..c16bb6c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -74,7 +74,7 @@ struct hns3_link_mode_mapping {
u32 ethtool_link_mode;
};
-static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop)
+static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop, bool en)
{
struct hnae3_handle *h = hns3_get_handle(ndev);
int ret;
@@ -85,11 +85,7 @@ static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop)
switch (loop) {
case HNAE3_MAC_INTER_LOOP_MAC:
- ret = h->ae_algo->ops->set_loopback(h, loop, true);
- break;
- case HNAE3_MAC_LOOP_NONE:
- ret = h->ae_algo->ops->set_loopback(h,
- HNAE3_MAC_INTER_LOOP_MAC, false);
+ ret = h->ae_algo->ops->set_loopback(h, loop, en);
break;
default:
ret = -ENOTSUPP;
@@ -99,10 +95,7 @@ static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop)
if (ret)
return ret;
- if (loop == HNAE3_MAC_LOOP_NONE)
- h->ae_algo->ops->set_promisc_mode(h, ndev->flags & IFF_PROMISC);
- else
- h->ae_algo->ops->set_promisc_mode(h, 1);
+ h->ae_algo->ops->set_promisc_mode(h, en);
return ret;
}
@@ -122,13 +115,13 @@ static int hns3_lp_up(struct net_device *ndev, enum hnae3_loop loop_mode)
return ret;
}
- ret = hns3_lp_setup(ndev, loop_mode);
+ ret = hns3_lp_setup(ndev, loop_mode, true);
usleep_range(10000, 20000);
return ret;
}
-static int hns3_lp_down(struct net_device *ndev)
+static int hns3_lp_down(struct net_device *ndev, enum hnae3_loop loop_mode)
{
struct hnae3_handle *h = hns3_get_handle(ndev);
int ret;
@@ -136,7 +129,7 @@ static int hns3_lp_down(struct net_device *ndev)
if (!h->ae_algo->ops->stop)
return -EOPNOTSUPP;
- ret = hns3_lp_setup(ndev, HNAE3_MAC_LOOP_NONE);
+ ret = hns3_lp_setup(ndev, loop_mode, false);
if (ret) {
netdev_err(ndev, "lb_setup return error: %d\n", ret);
return ret;
@@ -332,7 +325,7 @@ static void hns3_self_test(struct net_device *ndev,
data[test_index] = hns3_lp_up(ndev, loop_type);
if (!data[test_index]) {
data[test_index] = hns3_lp_run_test(ndev, loop_type);
- hns3_lp_down(ndev);
+ hns3_lp_down(ndev, loop_type);
}
if (data[test_index])
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 084b904..316ec842 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3682,48 +3682,50 @@ static void hclge_cfg_mac_mode(struct hclge_dev *hdev, bool enable)
"mac enable fail, ret =%d.\n", ret);
}
-static int hclge_set_loopback(struct hnae3_handle *handle,
- enum hnae3_loop loop_mode, bool en)
+static int hclge_set_mac_loopback(struct hclge_dev *hdev, bool en)
{
- struct hclge_vport *vport = hclge_get_vport(handle);
struct hclge_config_mac_mode_cmd *req;
- struct hclge_dev *hdev = vport->back;
struct hclge_desc desc;
u32 loop_en;
int ret;
- switch (loop_mode) {
- case HNAE3_MAC_INTER_LOOP_MAC:
- req = (struct hclge_config_mac_mode_cmd *)&desc.data[0];
- /* 1 Read out the MAC mode config at first */
- hclge_cmd_setup_basic_desc(&desc,
- HCLGE_OPC_CONFIG_MAC_MODE,
- true);
- ret = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (ret) {
- dev_err(&hdev->pdev->dev,
- "mac loopback get fail, ret =%d.\n",
- ret);
- return ret;
- }
+ req = (struct hclge_config_mac_mode_cmd *)&desc.data[0];
+ /* 1 Read out the MAC mode config at first */
+ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CONFIG_MAC_MODE, true);
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret) {
+ dev_err(&hdev->pdev->dev,
+ "mac loopback get fail, ret =%d.\n", ret);
+ return ret;
+ }
- /* 2 Then setup the loopback flag */
- loop_en = le32_to_cpu(req->txrx_pad_fcs_loop_en);
- if (en)
- hnae_set_bit(loop_en, HCLGE_MAC_APP_LP_B, 1);
- else
- hnae_set_bit(loop_en, HCLGE_MAC_APP_LP_B, 0);
+ /* 2 Then setup the loopback flag */
+ loop_en = le32_to_cpu(req->txrx_pad_fcs_loop_en);
+ hnae_set_bit(loop_en, HCLGE_MAC_APP_LP_B, en ? 1 : 0);
- req->txrx_pad_fcs_loop_en = cpu_to_le32(loop_en);
+ req->txrx_pad_fcs_loop_en = cpu_to_le32(loop_en);
- /* 3 Config mac work mode with loopback flag
- * and its original configure parameters
- */
- hclge_cmd_reuse_desc(&desc, false);
- ret = hclge_cmd_send(&hdev->hw, &desc, 1);
- if (ret)
- dev_err(&hdev->pdev->dev,
- "mac loopback set fail, ret =%d.\n", ret);
+ /* 3 Config mac work mode with loopback flag
+ * and its original configure parameters
+ */
+ hclge_cmd_reuse_desc(&desc, false);
+ ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+ if (ret)
+ dev_err(&hdev->pdev->dev,
+ "mac loopback set fail, ret =%d.\n", ret);
+ return ret;
+}
+
+static int hclge_set_loopback(struct hnae3_handle *handle,
+ enum hnae3_loop loop_mode, bool en)
+{
+ struct hclge_vport *vport = hclge_get_vport(handle);
+ struct hclge_dev *hdev = vport->back;
+ int ret;
+
+ switch (loop_mode) {
+ case HNAE3_MAC_INTER_LOOP_MAC:
+ ret = hclge_set_mac_loopback(hdev, en);
break;
default:
ret = -ENOTSUPP;
--
2.7.4
From: Salil Mehta <[email protected]>
Date: Wed, 9 May 2018 17:24:37 +0100
> Fixes to some of the bugs found during system test, internal review
> and clean-up
Series applied, thank you.