LinuxLists.cc - [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps

2018-05-24 07:08:28

Subject: [PATCH v2 00/13] ARM: pxa: switch to DMA slave maps

This v1 cover letter is quoted in [1].

For maintainers the table below should help you focus on the patches targetted at you, and ignore the other noise.

The differences since v1 is by maintainers / topic / patch :
- Arnd and Daniel / PXA topic / 0002
devices.c split into pxa25x.c, pxa27x.c and pxa3xx.c
- Boris and Daniel / MTD topic / 0005
Review and ack of this one
- Arnd and netdev / NET topic / 0006 and 0007
Arnd comment taken, review and ack of these one
- Mark and alsa-devel / ASoC topic / 0008
Mark, I couldn't keep your former Ack because :
- I changed one line so that the cpu device provides the DMA
- I added pxa2xx-i2s which was forgotten
Therefore I need a new ack
- Arnd and Daniel / SSP topic / 0013
Review and ack of this one

Happy review.

--
Robert

Robert Jarzmik (13):
dmaengine: pxa: use a dma slave map
ARM: pxa: add dma slave map
mmc: pxamci: remove the dmaengine compat need
media: pxa_camera: remove the dmaengine compat need
mtd: rawnand: marvell: remove the dmaengine compat need
net: smc911x: remove the dmaengine compat need
net: smc91x: remove the dmaengine compat need
ASoC: pxa: remove the dmaengine compat need
ata: pata_pxa: remove the dmaengine compat need
dmaengine: pxa: document pxad_param
dmaengine: pxa: make the filter function internal
ARM: pxa: remove the DMA IO resources
ARM: pxa: change SSP DMA channels allocation

arch/arm/mach-pxa/devices.c | 148 +---------------------------------
arch/arm/mach-pxa/devices.h | 6 +-
arch/arm/mach-pxa/pxa25x.c | 41 +++++++++-
arch/arm/mach-pxa/pxa27x.c | 42 +++++++++-
arch/arm/mach-pxa/pxa3xx.c | 44 +++++++++-
arch/arm/plat-pxa/ssp.c | 47 -----------
drivers/ata/pata_pxa.c | 10 +--
drivers/dma/pxa_dma.c | 13 ++-
drivers/media/platform/pxa_camera.c | 22 +----
drivers/mmc/host/pxamci.c | 29 +------
drivers/mtd/nand/raw/marvell_nand.c | 17 +---
drivers/net/ethernet/smsc/smc911x.c | 16 +---
drivers/net/ethernet/smsc/smc91x.c | 12 +--
drivers/net/ethernet/smsc/smc91x.h | 1 -
include/linux/dma/pxa-dma.h | 20 +++--
include/linux/platform_data/mmp_dma.h | 4 +
include/linux/pxa2xx_ssp.h | 2 -
sound/arm/pxa2xx-ac97.c | 14 +---
sound/arm/pxa2xx-pcm-lib.c | 6 +-
sound/soc/pxa/pxa-ssp.c | 5 +-
sound/soc/pxa/pxa2xx-ac97.c | 32 ++------
sound/soc/pxa/pxa2xx-i2s.c | 6 +-
22 files changed, 180 insertions(+), 357 deletions(-)

--
2.11.0

---
[1] Former v1 cover letter
This serie is aimed at removing the dmaengine slave compat use, and transfer
knowledge of the DMA requestors into architecture code.

This was discussed/advised by Arnd a couple of years back, it's almost time.

The serie is divided in 3 phasees :
- phase 1 : patch 1/15 and patch 2/15
=> this is the preparation work
- phase 2 : patches 3/15 .. 10/15
=> this is the switch of all the drivers
=> this one will require either an Ack of the maintainers or be taken by them
once phase 1 is merged
- phase 3 : patches 11/15
=> this is the last part, cleanup and removal of export of the DMA filter
function

As this looks like a patch bomb, each maintainer expressing for his tree either
an Ack or "I want to take through my tree" will be spared in the next iterations
of this serie.

Several of these changes have been tested on actual hardware, including :
- pxamci
- pxa_camera
- smc*
- ASoC and SSP

2018-05-24 07:08:30

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 07/13] net: smc91x: remove the dmaengine compat need

2018-05-24 07:08:34

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 13/13] ARM: pxa: change SSP DMA channels allocation

Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.

This specifically means that :
- for platform data based machines, the DMA requestor channels are
extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
ssp.<N>, and the channels are either "rx" or "tx".

- for device tree platforms, the dma node should be hooked into the
pxa2xx-ac97 or pxa-ssp-dai node.

Signed-off-by: Robert Jarzmik <[email protected]>
---
Since v1: Removed channel names from platform_data
---
arch/arm/plat-pxa/ssp.c | 47 ----------------------------------------------
include/linux/pxa2xx_ssp.h | 2 --
sound/soc/pxa/pxa-ssp.c | 5 ++---
3 files changed, 2 insertions(+), 52 deletions(-)

diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index ba13f793fbce..ed36dcab80f1 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
if (IS_ERR(ssp->clk))
return PTR_ERR(ssp->clk);

- if (dev->of_node) {
- struct of_phandle_args dma_spec;
- struct device_node *np = dev->of_node;
- int ret;
-
- /*
- * FIXME: we should allocate the DMA channel from this
- * context and pass the channel down to the ssp users.
- * For now, we lookup the rx and tx indices manually
- */
-
- /* rx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 0, &dma_spec);
-
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = dma_spec.args[0];
- of_node_put(dma_spec.np);
-
- /* tx */
- ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
- 1, &dma_spec);
- if (ret) {
- dev_err(dev, "Can't parse dmas property\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = dma_spec.args[0];
- of_node_put(dma_spec.np);
- } else {
- res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (res == NULL) {
- dev_err(dev, "no SSP RX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_rx = res->start;
-
- res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (res == NULL) {
- dev_err(dev, "no SSP TX DRCMR defined\n");
- return -ENODEV;
- }
- ssp->drcmr_tx = res->start;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no memory resource defined\n");
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index 8461b18e4608..03a7ca46735b 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -212,8 +212,6 @@ struct ssp_device {
int type;
int use_count;
int irq;
- int drcmr_rx;
- int drcmr_tx;

struct device_node *of_node;
};
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index 0291c7cb64eb..e09368d89bbc 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -104,9 +104,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
if (!dma)
return -ENOMEM;
-
- dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- &ssp->drcmr_tx : &ssp->drcmr_rx;
+ dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ "tx" : "rx";

snd_soc_dai_set_dma_data(cpu_dai, substream, dma);

--
2.11.0

2018-05-24 07:10:47

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 03/13] mmc: pxamci: remove the dmaengine compat need

2018-05-24 07:11:04

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 04/13] media: pxa_camera: remove the dmaengine compat need

2018-05-24 07:11:15

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 11/13] dmaengine: pxa: make the filter function internal

As the pxa architecture and all its related drivers do not rely anymore
on the filter function, thanks to the slave map conversion, make
pxad_filter_fn() static, and remove it from the global namespace.

Signed-off-by: Robert Jarzmik <[email protected]>
---
drivers/dma/pxa_dma.c | 5 ++---
include/linux/dma/pxa-dma.h | 11 -----------
2 files changed, 2 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 9505334f9c6e..a332ad1d7dfb 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -179,7 +179,7 @@ static unsigned int pxad_drcmr(unsigned int line)
return 0x1000 + line * 4;
}

-bool pxad_filter_fn(struct dma_chan *chan, void *param);
+static bool pxad_filter_fn(struct dma_chan *chan, void *param);

/*
* Debug fs
@@ -1496,7 +1496,7 @@ static struct platform_driver pxad_driver = {
.remove = pxad_remove,
};

-bool pxad_filter_fn(struct dma_chan *chan, void *param)
+static bool pxad_filter_fn(struct dma_chan *chan, void *param)
{
struct pxad_chan *c = to_pxad_chan(chan);
struct pxad_param *p = param;
@@ -1509,7 +1509,6 @@ bool pxad_filter_fn(struct dma_chan *chan, void *param)

return true;
}
-EXPORT_SYMBOL_GPL(pxad_filter_fn);

module_platform_driver(pxad_driver);

diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h
index 9fc594f69eff..fceb5df07097 100644
--- a/include/linux/dma/pxa-dma.h
+++ b/include/linux/dma/pxa-dma.h
@@ -23,15 +23,4 @@ struct pxad_param {
enum pxad_chan_prio prio;
};

-struct dma_chan;
-
-#ifdef CONFIG_PXA_DMA
-bool pxad_filter_fn(struct dma_chan *chan, void *param);
-#else
-static inline bool pxad_filter_fn(struct dma_chan *chan, void *param)
-{
- return false;
-}
-#endif
-
#endif /* _PXA_DMA_H_ */
--
2.11.0

2018-05-24 07:16:18

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 09/13] ata: pata_pxa: remove the dmaengine compat need

2018-05-24 07:16:56

by Robert Jarzmik

[permalink] [raw]

Subject: [PATCH v2 05/13] mtd: rawnand: marvell: remove the dmaengine compat need

2018-05-24 07:17:07

by Robert Jarzmik

[permalink] [raw]

The patch

ASoC: pxa: remove the dmaengine compat need

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8f54061d001ad2da24dba89fc48adbbf4c85222b Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <[email protected]>
Date: Thu, 28 Jun 2018 22:08:37 +0200
Subject: [PATCH] ASoC: pxa: remove the dmaengine compat need

As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.

This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().

Signed-off-by: Robert Jarzmik <[email protected]>
Signed-off-by: Daniel Mack <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
---
sound/arm/pxa2xx-ac97.c | 14 ++------------
sound/arm/pxa2xx-pcm-lib.c | 6 +++---
sound/soc/pxa/pxa2xx-ac97.c | 32 +++++---------------------------
sound/soc/pxa/pxa2xx-i2s.c | 6 ++----
4 files changed, 12 insertions(+), 46 deletions(-)

diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4bc244c40f80..236a63cdaf9f 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
.reset = pxa2xx_ac97_legacy_reset,
};

-static struct pxad_param pxa2xx_ac97_pcm_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 12,
-};
-
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_out",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_out_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 11,
};

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_in",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_in_req,
};

static struct snd_pcm *pxa2xx_ac97_pcm;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index e8da3b8ee721..dcbe7ecc1835 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream)
if (ret < 0)
return ret;

- return snd_dmaengine_pcm_open_request_chan(substream,
- pxad_filter_fn,
- dma_params->filter_data);
+ return snd_dmaengine_pcm_open(
+ substream, dma_request_slave_channel(rtd->cpu_dai->dev,
+ dma_params->chan_name));
}
EXPORT_SYMBOL(__pxa2xx_pcm_open);

diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index 5738a0abcd6a..c52b33802bf2 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = {
.reset = pxa2xx_ac97_cold_reset,
};

-static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 11,
-};
-
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_in",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_stereo_in_req,
-};
-
-static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 12,
};

static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = {
.addr = __PREG(PCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "pcm_pcm_stereo_out",
.maxburst = 32,
- .filter_data = &pxa2xx_ac97_pcm_stereo_out_req,
};

-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 10,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = {
.addr = __PREG(MODR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mono_out",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req,
};

-static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 9,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = {
.addr = __PREG(MODR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mono_in",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req,
};

-static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = {
- .prio = PXAD_PRIO_LOWEST,
- .drcmr = 8,
-};
static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
.addr = __PREG(MCDR),
.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES,
+ .chan_name = "pcm_aux_mic_mono",
.maxburst = 16,
- .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req,
};

static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream,
diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 3fb60baf6eab..e7184de0de04 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s;
static struct clk *clk_i2s;
static int clk_ena = 0;

-static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3;
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = {
.addr = __PREG(SADR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "tx",
.maxburst = 32,
- .filter_data = &pxa2xx_i2s_pcm_stereo_out_req,
};

-static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2;
static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = {
.addr = __PREG(SADR),
.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ .chan_name = "rx",
.maxburst = 32,
- .filter_data = &pxa2xx_i2s_pcm_stereo_in_req,
};

static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
--
2.18.0.rc2