This patch-set presents miscellaneous bug fixes and an optimization
for HNS3 driver
V1->V2:
* Fixes the compilation break reported by David Miller & Kbuild
Xi Wang (3):
net: hns3: Fix for VF mailbox cannot receiving PF response
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Optimize PF CMDQ interrupt switching process
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 ++++++++++++
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 23 +++++++++++++++++++---
3 files changed, 36 insertions(+), 3 deletions(-)
--
2.7.4
From: Xi Wang <[email protected]>
Before the firmware updates the crq's tail pointer, if the VF driver
reads the data in the crq, the data may be incomplete at this time,
which will lead to the driver read an unknown message.
This patch fixes it by checking if crq is empty before reading the
message.
Fixes: b11a0bb231f3 ("net: hns3: Add mailbox support to VF driver")
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
Patch V2: Fixes the compilation break reported David Miller & Kbuild
Link: https://lkml.org/lkml/2018/6/5/866
https://lkml.org/lkml/2018/6/6/147
Patch V1: Initial Submit
---
.../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c | 23 +++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
index a286184..b598c06 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
@@ -126,6 +126,13 @@ int hclgevf_send_mbx_msg(struct hclgevf_dev *hdev, u16 code, u16 subcode,
return status;
}
+static bool hclgevf_cmd_crq_empty(struct hclgevf_hw *hw)
+{
+ u32 tail = hclgevf_read_dev(hw, HCLGEVF_NIC_CRQ_TAIL_REG);
+
+ return tail == hw->cmq.crq.next_to_use;
+}
+
void hclgevf_mbx_handler(struct hclgevf_dev *hdev)
{
struct hclgevf_mbx_resp_status *resp;
@@ -140,11 +147,22 @@ void hclgevf_mbx_handler(struct hclgevf_dev *hdev)
resp = &hdev->mbx_resp;
crq = &hdev->hw.cmq.crq;
- flag = le16_to_cpu(crq->desc[crq->next_to_use].flag);
- while (hnae_get_bit(flag, HCLGEVF_CMDQ_RX_OUTVLD_B)) {
+ while (!hclgevf_cmd_crq_empty(&hdev->hw)) {
desc = &crq->desc[crq->next_to_use];
req = (struct hclge_mbx_pf_to_vf_cmd *)desc->data;
+ flag = le16_to_cpu(crq->desc[crq->next_to_use].flag);
+ if (unlikely(!hnae_get_bit(flag, HCLGEVF_CMDQ_RX_OUTVLD_B))) {
+ dev_warn(&hdev->pdev->dev,
+ "dropped invalid mailbox message, code = %d\n",
+ req->msg[0]);
+
+ /* dropping/not processing this invalid message */
+ crq->desc[crq->next_to_use].flag = 0;
+ hclge_mbx_ring_ptr_move_crq(crq);
+ continue;
+ }
+
/* synchronous messages are time critical and need preferential
* treatment. Therefore, we need to acknowledge all the sync
* responses as quickly as possible so that waiting tasks do not
@@ -205,7 +223,6 @@ void hclgevf_mbx_handler(struct hclgevf_dev *hdev)
}
crq->desc[crq->next_to_use].flag = 0;
hclge_mbx_ring_ptr_move_crq(crq);
- flag = le16_to_cpu(crq->desc[crq->next_to_use].flag);
}
/* Write back CMDQ_RQ header pointer, M7 need this pointer */
--
2.7.4
From: Xi Wang <[email protected]>
When the PF frequently switches the CMDQ interrupt, if the CMDQ_SRC is
not cleared before the hardware interrupt is generated, the new interrupt
will not be reported.
This patch optimizes this problem by clearing CMDQ_SRC and RESET_STS
before enabling interrupt and syncing pending IRQ handlers after disabling
interrupt.
Fixes: 466b0c00391b ("net: hns3: Add support for misc interrupt")
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 2a80134..d318d35 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2557,6 +2557,15 @@ static void hclge_clear_event_cause(struct hclge_dev *hdev, u32 event_type,
}
}
+static void hclge_clear_all_event_cause(struct hclge_dev *hdev)
+{
+ hclge_clear_event_cause(hdev, HCLGE_VECTOR0_EVENT_RST,
+ BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B) |
+ BIT(HCLGE_VECTOR0_CORERESET_INT_B) |
+ BIT(HCLGE_VECTOR0_IMPRESET_INT_B));
+ hclge_clear_event_cause(hdev, HCLGE_VECTOR0_EVENT_MBX, 0);
+}
+
static void hclge_enable_vector(struct hclge_misc_vector *vector, bool enable)
{
writel(enable ? 1 : 0, vector->addr);
@@ -5688,6 +5697,8 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
INIT_WORK(&hdev->rst_service_task, hclge_reset_service_task);
INIT_WORK(&hdev->mbx_service_task, hclge_mailbox_service_task);
+ hclge_clear_all_event_cause(hdev);
+
/* Enable MISC vector(vector0) */
hclge_enable_vector(&hdev->misc_vector, true);
@@ -5817,6 +5828,8 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
/* Disable MISC vector(vector0) */
hclge_enable_vector(&hdev->misc_vector, false);
+ synchronize_irq(hdev->misc_vector.vector_irq);
+
hclge_destroy_cmd_queue(&hdev->hw);
hclge_misc_irq_uninit(hdev);
hclge_pci_uninit(hdev);
--
2.7.4
From: Xi Wang <[email protected]>
When the VF frequently switches the CMDQ interrupt, if the CMDQ_SRC is not
cleared, the VF will not receive the new PF response after the interrupt
is re-enabled, the corresponding log is as follows:
[ 317.482222] hns3 0000:00:03.0: VF could not get mbx resp(=0) from PF
in 500 tries
[ 317.483137] hns3 0000:00:03.0: VF request to get tqp info from PF
failed -5
This patch fixes this problem by clearing CMDQ_SRC before enabling
interrupt and syncing pending IRQ handlers after disabling interrupt.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Xi Wang <[email protected]>
Signed-off-by: Peng Li <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index dd8e8e6..d55ee9c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1576,6 +1576,8 @@ static int hclgevf_misc_irq_init(struct hclgevf_dev *hdev)
return ret;
}
+ hclgevf_clear_event_cause(hdev, 0);
+
/* enable misc. vector(vector 0) */
hclgevf_enable_vector(&hdev->misc_vector, true);
@@ -1586,6 +1588,7 @@ static void hclgevf_misc_irq_uninit(struct hclgevf_dev *hdev)
{
/* disable misc vector(vector 0) */
hclgevf_enable_vector(&hdev->misc_vector, false);
+ synchronize_irq(hdev->misc_vector.vector_irq);
free_irq(hdev->misc_vector.vector_irq, hdev);
hclgevf_free_vector(hdev, 0);
}
--
2.7.4
From: Salil Mehta <[email protected]>
Date: Wed, 6 Jun 2018 14:07:50 +0100
> This patch-set presents miscellaneous bug fixes and an optimization
> for HNS3 driver
>
> V1->V2:
> * Fixes the compilation break reported by David Miller & Kbuild
Series applied, hope this one builds better :)