Add the generic ac97 bus binding, especially for ac97 codecs discovered
by ac97 hardware probing.
Signed-off-by: Robert Jarzmik <[email protected]>
---
.../devicetree/bindings/sound/ac97-bus.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/ac97-bus.txt
diff --git a/Documentation/devicetree/bindings/sound/ac97-bus.txt b/Documentation/devicetree/bindings/sound/ac97-bus.txt
new file mode 100644
index 000000000000..103c428f2595
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ac97-bus.txt
@@ -0,0 +1,32 @@
+Generic AC97 Device Properties
+
+This documents describes the devicetree bindings for an ac97 controller child
+node describing ac97 codecs.
+
+Required properties:
+-compatible : Must be "ac97,vendor_id1,vendor_id2
+ The ids shall be the 4 characters hexadecimal encoding, such as
+ given by "%04x" formatting of printf
+-reg : Must be the ac97 codec number, between 0 and 3
+
+Example:
+ac97: sound@40500000 {
+ compatible = "marvell,pxa270-ac97";
+ reg = < 0x40500000 0x1000 >;
+ interrupts = <14>;
+ reset-gpios = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = < &pinctrl_ac97_default >;
+ clocks = <&clks CLK_AC97>, <&clks CLK_AC97CONF>;
+ clock-names = "AC97CLK", "AC97CONFCLK";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@0 {
+ reg = <0>;
+ compatible = "ac97,574d,4c13";
+ clocks = <&fixed_wm9713_clock>;
+ clock-names = "ac97_clk";
+ }
+};
--
2.11.0
Add a devicetree binding for codecs. This is especially useful if the
AC97 bitclk clock is provided by the codec, as it has to be described in
the devicetree description for the ac97 bus code to aquire it.
Signed-off-by: Robert Jarzmik <[email protected]>
---
Since v1: handle of_put_node() in codec removal
---
sound/ac97/bus.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c
index 31f858eceffc..7a0dfca03a57 100644
--- a/sound/ac97/bus.c
+++ b/sound/ac97/bus.c
@@ -13,6 +13,7 @@
#include <linux/idr.h>
#include <linux/list.h>
#include <linux/mutex.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
@@ -68,6 +69,27 @@ ac97_codec_find(struct ac97_controller *ac97_ctrl, unsigned int codec_num)
return ac97_ctrl->codecs[codec_num];
}
+static struct device_node *
+ac97_of_get_child_device(struct ac97_controller *ac97_ctrl, int idx,
+ unsigned int vendor_id)
+{
+ struct device_node *node;
+ u32 reg;
+ char compat[] = "ac97,0000,0000";
+
+ snprintf(compat, sizeof(compat), "ac97,%04x,%04x",
+ vendor_id >> 16, vendor_id & 0xffff);
+
+ for_each_child_of_node(ac97_ctrl->parent->of_node, node) {
+ if ((idx != of_property_read_u32(node, "reg", ®)) ||
+ !of_device_is_compatible(node, compat))
+ continue;
+ return of_node_get(node);
+ }
+
+ return NULL;
+}
+
static void ac97_codec_release(struct device *dev)
{
struct ac97_codec_device *adev;
@@ -76,6 +98,7 @@ static void ac97_codec_release(struct device *dev)
adev = to_ac97_device(dev);
ac97_ctrl = adev->ac97_ctrl;
ac97_ctrl->codecs[adev->num] = NULL;
+ of_node_put(dev->of_node);
kfree(adev);
}
@@ -98,6 +121,8 @@ static int ac97_codec_add(struct ac97_controller *ac97_ctrl, int idx,
device_initialize(&codec->dev);
dev_set_name(&codec->dev, "%s:%u", dev_name(ac97_ctrl->parent), idx);
+ codec->dev.of_node = ac97_of_get_child_device(ac97_ctrl, idx,
+ vendor_id);
ret = device_add(&codec->dev);
if (ret)
@@ -105,6 +130,7 @@ static int ac97_codec_add(struct ac97_controller *ac97_ctrl, int idx,
return 0;
err_free_codec:
+ of_node_put(codec->dev.of_node);
put_device(&codec->dev);
kfree(codec);
ac97_ctrl->codecs[idx] = NULL;
--
2.11.0
On Fri, 22 Jun 2018 21:28:33 +0200,
Robert Jarzmik wrote:
>
> Add the generic ac97 bus binding, especially for ac97 codecs discovered
> by ac97 hardware probing.
>
> Signed-off-by: Robert Jarzmik <[email protected]>
OK, now I applied both patches.
Mark, if you need these changes, pull topic/ac97-bus branch from my
tree. It's a clean branch from 4.18-rc1.
thanks,
Takashi
On Mon, Jun 25, 2018 at 10:07:02AM +0200, Takashi Iwai wrote:
> On Fri, 22 Jun 2018 21:28:33 +0200,
> Robert Jarzmik wrote:
> >
> > Add the generic ac97 bus binding, especially for ac97 codecs discovered
> > by ac97 hardware probing.
> >
> > Signed-off-by: Robert Jarzmik <[email protected]>
>
> OK, now I applied both patches.
>
> Mark, if you need these changes, pull topic/ac97-bus branch from my
> tree. It's a clean branch from 4.18-rc1.
Thanks!