wait_chip_ready() and wait_firmware_ready() are never
called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <[email protected]>
---
drivers/scsi/a100u2w.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index 8086bd0ac9fd..358dfeb1a9c2 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -143,7 +143,7 @@ static u8 wait_chip_ready(struct orc_host * host)
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
if (inb(host->base + ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */
return 1;
- mdelay(100);
+ msleep(100);
}
return 0;
}
@@ -155,7 +155,7 @@ static u8 wait_firmware_ready(struct orc_host * host)
for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */
if (inb(host->base + ORC_HSTUS) & RREADY) /* Wait READY set */
return 1;
- mdelay(100); /* wait 100ms before try again */
+ msleep(100); /* wait 100ms before try again */
}
return 0;
}
--
2.17.0