From: Sean Wang <[email protected]>
Improve more in the existing code by reusing dma_zalloc_coherent instead
of dma_alloc_coherent with __GFP_ZERO or superfluous zeroing buffer.
Signed-off-by: Sean Wang <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index c30aea2..8c85a4b 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -605,10 +605,10 @@ static int mtk_init_fq_dma(struct mtk_eth *eth)
dma_addr_t dma_addr;
int i;
- eth->scratch_ring = dma_alloc_coherent(eth->dev,
- cnt * sizeof(struct mtk_tx_dma),
- ð->phy_scratch_ring,
- GFP_ATOMIC | __GFP_ZERO);
+ eth->scratch_ring = dma_zalloc_coherent(eth->dev,
+ cnt * sizeof(struct mtk_tx_dma),
+ ð->phy_scratch_ring,
+ GFP_ATOMIC);
if (unlikely(!eth->scratch_ring))
return -ENOMEM;
@@ -623,7 +623,6 @@ static int mtk_init_fq_dma(struct mtk_eth *eth)
if (unlikely(dma_mapping_error(eth->dev, dma_addr)))
return -ENOMEM;
- memset(eth->scratch_ring, 0x0, sizeof(struct mtk_tx_dma) * cnt);
phy_ring_tail = eth->phy_scratch_ring +
(sizeof(struct mtk_tx_dma) * (cnt - 1));
@@ -1318,10 +1317,9 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag)
return -ENOMEM;
}
- ring->dma = dma_alloc_coherent(eth->dev,
- rx_dma_size * sizeof(*ring->dma),
- &ring->phys,
- GFP_ATOMIC | __GFP_ZERO);
+ ring->dma = dma_zalloc_coherent(eth->dev,
+ rx_dma_size * sizeof(*ring->dma),
+ &ring->phys, GFP_ATOMIC);
if (!ring->dma)
return -ENOMEM;
--
2.7.4
From: Sean Wang <[email protected]>
Since driver is devicetree-based, all device type and charateristic can be
determined by the compatible string and its data. It's unnecessary to
create another dependent function to check chip ID and then decide whether
the specific funciton is being supported on a certain device. It can be
totally replaced by the existing flag, so a cleanup is made by removing
the function and the only user, HWLRO.
MT2701 also have a missing HWLRO support in old code, so add it the same
patch.
Signed-off-by: Sean Wang <[email protected]>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 48 +++--------------------------
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +-
2 files changed, 5 insertions(+), 45 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8c85a4b..6e6abdc 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -2458,42 +2458,6 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
return err;
}
-static int mtk_get_chip_id(struct mtk_eth *eth, u32 *chip_id)
-{
- u32 val[2], id[4];
-
- regmap_read(eth->ethsys, ETHSYS_CHIPID0_3, &val[0]);
- regmap_read(eth->ethsys, ETHSYS_CHIPID4_7, &val[1]);
-
- id[3] = ((val[0] >> 16) & 0xff) - '0';
- id[2] = ((val[0] >> 24) & 0xff) - '0';
- id[1] = (val[1] & 0xff) - '0';
- id[0] = ((val[1] >> 8) & 0xff) - '0';
-
- *chip_id = (id[3] * 1000) + (id[2] * 100) +
- (id[1] * 10) + id[0];
-
- if (!(*chip_id)) {
- dev_err(eth->dev, "failed to get chip id\n");
- return -ENODEV;
- }
-
- dev_info(eth->dev, "chip id = %d\n", *chip_id);
-
- return 0;
-}
-
-static bool mtk_is_hwlro_supported(struct mtk_eth *eth)
-{
- switch (eth->chip_id) {
- case MT7622_ETH:
- case MT7623_ETH:
- return true;
- }
-
- return false;
-}
-
static int mtk_probe(struct platform_device *pdev)
{
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -2572,11 +2536,7 @@ static int mtk_probe(struct platform_device *pdev)
if (err)
return err;
- err = mtk_get_chip_id(eth, ð->chip_id);
- if (err)
- return err;
-
- eth->hwlro = mtk_is_hwlro_supported(eth);
+ eth->hwlro = MTK_HAS_CAPS(eth->soc->caps, MTK_HWLRO);
for_each_child_of_node(pdev->dev.of_node, mac_np) {
if (!of_device_is_compatible(mac_np,
@@ -2665,19 +2625,19 @@ static int mtk_remove(struct platform_device *pdev)
}
static const struct mtk_soc_data mt2701_data = {
- .caps = MTK_GMAC1_TRGMII,
+ .caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
.required_clks = MT7623_CLKS_BITMAP,
.required_pctl = true,
};
static const struct mtk_soc_data mt7622_data = {
- .caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW,
+ .caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW | MTK_HWLRO,
.required_clks = MT7622_CLKS_BITMAP,
.required_pctl = false,
};
static const struct mtk_soc_data mt7623_data = {
- .caps = MTK_GMAC1_TRGMII,
+ .caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
.required_clks = MT7623_CLKS_BITMAP,
.required_pctl = true,
};
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 672b8c3..4681929 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -566,6 +566,7 @@ struct mtk_rx_ring {
#define MTK_GMAC2_SGMII (BIT(10) | MTK_SGMII)
#define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \
MTK_GMAC2_SGMII)
+#define MTK_HWLRO BIT(12)
#define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x))
/* struct mtk_eth_data - This is the structure holding all differences
@@ -635,7 +636,6 @@ struct mtk_eth {
struct regmap *ethsys;
struct regmap *sgmiisys;
struct regmap *pctl;
- u32 chip_id;
bool hwlro;
refcount_t dma_refcnt;
struct mtk_tx_ring tx_ring;
--
2.7.4
From: <[email protected]>
Date: Sat, 28 Jul 2018 13:35:55 +0800
> From: Sean Wang <[email protected]>
>
> Improve more in the existing code by reusing dma_zalloc_coherent instead
> of dma_alloc_coherent with __GFP_ZERO or superfluous zeroing buffer.
>
> Signed-off-by: Sean Wang <[email protected]>
Applied.
From: <[email protected]>
Date: Sat, 28 Jul 2018 13:35:56 +0800
> From: Sean Wang <[email protected]>
>
> Since driver is devicetree-based, all device type and charateristic can be
> determined by the compatible string and its data. It's unnecessary to
> create another dependent function to check chip ID and then decide whether
> the specific funciton is being supported on a certain device. It can be
> totally replaced by the existing flag, so a cleanup is made by removing
> the function and the only user, HWLRO.
>
> MT2701 also have a missing HWLRO support in old code, so add it the same
> patch.
>
> Signed-off-by: Sean Wang <[email protected]>
Applied.